Enhancing the stability of oil-in-water emulsions by non-covalent interaction between whey protein isolate and hyaluronic acid

Hyaluronic acid promotes heat-induced gelation of ginkgo seed proteins

This study aimed to investigate how varying concentrations (0.01-0.5 %, w/v) and molecular weights (50, 500, 1500 kDa) of hyaluronic acid (HA) affect the physicochemical properties of heat-induced ginkgo seed protein isolate (GSPI)-HA composite gel. Incorporating HA increased viscosity (up to 14 times) and charge (up to 23 %) of GSPI-HA aggregates, while reducing particle size (up to 31 %) and improving gel texture, particularly with high molecular weight HA. However, high concentrations (0.5 %, w/v) of HA weakened gel texture. Non-covalent bonds primarily drive the formation of a continuous gel network between HA and GSPI, resulting in small pores and enhanced hydration properties. With increasing HA molecular weight, non-covalent interactions between GSPI and HA increased, leading to improved gel thermal stability. Overall, the study suggests that manipulating the molecular weight and concentration of HA can enhance the gelling properties of GSPI, leading to the development of a diverse array of GSPI-HA composite gels with varied properties.

Technological properties of the furcellaran-whey protein isolate emulgels with various evening primrose oil concentration

Effect of different evening primrose oil content (1-20 %) on the rheological, mechanical, textural and microstructure of furcellaran/whey protein isolate emulsion gels were investigated at neutral, unmodified pH environment. The results indicate that, irrespective of the concentration, the oil acted as an inactive filler and was not chemically bound in the polymer network but only physically immobilized in it. The increasing oil amount in the material from 1 to 20 % resulted in a percentage decrease in hardness (52 %), gumminess (71 %) and stress relaxation ratio (17 %) which means that presence of the hydrophobic components weakens the structure of the material, but all samples exhibit elastic behaviour. The swelling ratio values of the emulgels increased with growing oil additions. Zeta potential values of the emulsion gel solutions were not linear correlate with formulation. Colour of the material was strongly depended on the oil amount. Both whitening and yellowness index values increased with increasing fat fraction in the sample. The microstructural image shows irregular oil droplets on the matrix network.

Advanced characterization of fish skin gelatin-proanthocyanidins covalent and non-covalent composite emulsions for benzyl isothiocyanate delivery

This research endeavored to engineer robust delivery matrices for bioactives, specifically benzyl isothiocyanate (BITC), by harnessing the synergistic covalent and non-covalent interactions between fish skin gelatin (FSG) and proanthocyanidins (PC) to synthesize novel composite emulsions. The objective was to delineate the influence of these molecular interactions on the emulsion's structural integrity and stability, which are pivotal for the efficacious encapsulation and controlled release of BITC. Employing a suite of analytical techniques, including Fourier transform infrared spectroscopy (FTIR), fluorescence spectroscopy, and contact angle measurements, the study delineated the predominant molecular forces at play within the FSG-PC complex, identifying electrostatic and hydrophobic interactions as the cornerstones of this interaction. An assessment of the emulsions' physicochemical properties, encompassing chromaticity, antioxidant efficacy, microstructural attributes, particle dimensions, zeta potential, and BITC retention, was undertaken to discern the optimal encapsulation strategy. The data unequivocally indicated that emulsions enriched with 0.06 wt% PC, in non-covalent synergy with FSG, afforded the most pronounced stability and retention of BITC. This work paves the way for future studies and the translational application of FSG-PC composite emulsions in the realm of bioactive substance delivery, offering a promising avenue for innovation in pharmaceutical and nutraceutical formulations.

Synergistic modification of ovalbumin by pH-driven and metal-phenolic networks: Development of dysphagia friendly high internal phase Pickering emulsions

Dysphagia is a common functional disorder that limits the variety of available foods. This study explored the coordination assembly of tannic acid (TA) with Fe3+ to form a metal-phenolic network (MPN) and developed ovalbumin (OVA)/MPN via a pH-driven method as a novel emulsifier to stabilize high internal phase Pickering emulsions (HIPPEs). Results indicated that, following pH-driven treatment, the OVA/MPN composite particles exhibited smaller sizes, enhanced electrostatic repulsion, and improved stability. UV-visible spectroscopy confirmed the successful assembly of MPN with OVA, while pH-driven processes facilitated MPN formation. Multi-spectral technology showed that MPN altered the intermolecular interactions and structural properties of OVA. The cooperatively modified OVA demonstrated superior interfacial wettability and emulsifying properties. Rheological studies revealed that all HIPPEs exhibited gel-like behavior and shear-thinning characteristics. HIPPEs stabilized by OVA, modified synergistically through pH-driven and MPN introduction, showed a dense network structure with higher viscosity, modulus, yield stress, and elasticity. IDDSI testing showed that HIPPEs with TA below 8 mg/mL had low-risk swallowing characteristics, while those with 12 mg/mL exhibited reduced rheological performance and failed the Level 4 dysphagia test. These findings provide crucial insights for the future development of HIPPEs suitable for individuals with dysphagia.

Fabrication of high internal phase emulsions (HIPEs) using pea protein isolate-hyaluronic acid-tannic acid complexes: Application of curcumin-loaded HIPEs as edible inks for 3D food printing

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H7-T1), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H7-T1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components.

Effect of ultrasonic treatment on the structure and emulsification properties of soybean isolate protein-hyaluronic acid complexes and the stability of their loaded astaxanthin emulsions

The purpose of this work was to prepare an astaxanthin emulsion stabilized by a soybean isolate protein (SPI)-hyaluronic acid (HA) complex and to investigate its protective effect on astaxanthin. In order to examine the impact of various ultrasonic energies (0 W-300 W) on the structural characteristics of the complex and the stability of the emulsion, the SPI-HA complex was created via ultrasonography. The findings demonstrated that ultrasonication may had an impact on the hydrophobic, electrostatic, and hydrogen bonding interactions between SPI and HA, which caused the protein structure to unfold and reveal the interior hydrophobic amino acid residues. Moreover, ultrasonication enhanced the emulsification qualities of SPI-HA complexes by lowering their average particle size. The rheological findings demonstrated that the emulsion's viscosity and energy storage modulus (G') were considerably decreased by the ultrasonic treatment. The appearance of the emulsions and optical microscopy results further indicated that the emulsions prepared from SPI-HA had superior storage stability, pH stability, and light stability compared to pure SPI. SPI-HA exhibited superior emulsion stability and lower particle size at 150 W ultrasonic power. The AST incorporated in the emulsion was also well protected. The emulsion effectively slows down the degradation of AST. The findings of this study may help create more robust and natural emulsion delivery systems that guarantee the continuous or regulated release of lipophilic bioactive compounds.

Hydroxyl radical-induced oxidation boosts the gelation of ginkgo seed protein in the presence of hyaluronic acid

Hydroxyl radical-induced oxidation can modify gelling properties of food proteins. In this study, a hydroxyl radical generating system (HRGS), consisting of 0.1 mM Fe3+, 0.1 mM ascorbic acid, and 1, 10, or 20 mM H2O2, was used to oxidize ginkgo seed protein isolate (GSPI) for 4 h at ambient temperature in the presence of 0.3 % (w/v) hyaluronic acid (HA) to enhance its gelation properties. HRGS treatment led to increased protein hydrophobicity, reduced sulfhydryl content, and disulfide bond-mediated protein crosslinking. Moreover, the secondary structure of GSPI varied with H2O2 concentrations. Moderate oxidation (approximately 10 mM H2O2) promoted GSPI aggregation and improved mechanical strength, rheological properties, water holding capacity, and whiteness of GSPI gels. However, excessive oxidation disrupted hydrogen bonding, generated excessive disulfide bonds, hindered active group interaction, inhibited gel network formation, and reduced gel strength. Hence, hydroxyl radical-induced oxidation holds potential for enhancing GSPI gelation within specific concentration ranges. This study suggests that controlled oxidation could be a novel approach for developing protein-based gel products.

Characterization and molecular docking of sustainable wine lees and gelatin-based emulsions: innovative fat substitution

BACKGROUND

The present study aimed to determine how various amounts (0.00, 0.58, 1.52 and 4.50 g 100 g-1) of wine lees (WL), which contains numerous essential components, impact the emulsifying properties of fish gelatin (FG) at a low concentration (0.5 g 100 g-1) in the high-fat phase (65 g 100 g-1). This study conducted rheology, physicochemical technical and characterization analyses on the emulsions to provide sustainable and innovative approaches for spreadable oils.

RESULTS

The addition of WL to FG emulsions improved oxidative stability, emulsion stability and bioactive compounds. The zeta potential (-101 ± 5.62 mV) of 0.58 g 100 g-1 WL-containing emulsion (PE1) was found to be high, whereas particle size (347.6 ± 5.25 nm) and polydispersity index (0.50) were statistically low. It was also found that the addition of WL improved the intermolecular interactions, crystallinity and microstructural properties of the emulsions. All these results were supported by simulating the molecular configuration between FG and WL. The compounds gallic acid, caffeic acid, myricetin, quercetin and resveratrol showed a strong affinity to FG, with free binding energies of -5.50, -5.88, -6.53, -6.68 and -6.66 kcal mol-1, respectively.

CONCLUSION

As a result, WL-supported FG has the potential to be used as an alternative to egg proteins to develop sustainable low-cost spreadable emulsions. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Effects of thermal treatment on the formation and properties of whey protein isolate/whey protein hydrolysate-sodium hyaluronate complexes

In dairy products, the added sodium hyaluronate may form complexes with proteins, thereby affecting product properties. In the present study, the interaction between whey protein isolate (WPI)/ whey protein hydrolysate (WPH) and sodium hyaluronate (SH) was characterized under thermal treatment at different temperatures (25 ℃, 65 ℃, 90 ℃ and 121 ℃) after studying effects of protein/SH ratio and pH on complex formation. The addition of SH reduced the particle size of WPI/WPH and increased potential value in the system, with greater variation with increasing treatment temperature. The structural properties of complexes were studied. The binding with SH decreased the contents of free amino group and free thiol group, as well as the fluorescence intensity and surface hydrophobicity. FTIR results and browning intensity measurement demonstrated the formation of Maillard reaction products. Moreover, the attachment of SH improved the thermal stability of WPI/WPH and decreased their antigenicity.

Preparation and characterization of tilapia protein isolate - Hyaluronic acid complexes using a pH-driven method for improving the stability of tilapia protein isolate emulsion

This study aimed to investigate the non-covalent complexation between hyaluronic acid (HA) and tilapia protein isolate (TPI) on the stability of oil-in-water (O/W) TPI emulsion. The results showed that HA binds to TPI through electrostatic, hydrophobic, and hydrogen bonding interactions, forming homogeneous hydrophilic TPI-HA complexes. The binding of HA promoted the structural folding of TPI and altered its secondary structure during pH neutralization. The TPI-HA complexes presented significantly improved EAI and ESI (P < 0.05) when the HA concentration was 0.8 % (w/v). Emulsion characterization showed that HA promoted the transfer of TPI to the O/W interface, forming an emulsion with excellent stability, which, combined with the high surface charge and strong spatial site resistance effect of HA, improved TPI emulsion stability. Therefore, non-covalent complexation with HA is an effective strategy to improve the stability of TPI emulsion.

Hyaluronic acid-poly(glyceryl)10-stearate nanoemulsion for co-delivery of fish oil and resveratrol: Enhancing bioaccessibility and antioxidant potency

Hyaluronic acid (HA), an endogenous polysaccharide comprising alternating D-glucuronic acid and N-acetylglucosamine units, is renowned for its high hydrophilicity, biocompatibility, and biodegradability. These attributes have rendered HA invaluable across medical and drug delivery fields. HA can be altered through physical, chemical, or enzymatic methods to improve the properties of the modified substances. In this work, we synthesized a derivative via the esterification of HA with poly(glyceryl)10-stearate (PG10-C18), designated as HA-PG10-C18. This novel derivative was employed to fabricate a nano co-delivery system (HA-PG10-C18@Res-NE) for fish oil and resveratrol (Res), aiming to enhance their stability and bioaccessibility. An exhaustive investigation of HA-PG10-C18@Res-NE revealed that the HA-modified system displayed superior physicochemical stability, notably in withstanding oxidation and neutralizing free radicals. Moreover, in vitro simulated digestion underscored the system's enhanced bioaccessibility of Res and more efficient release of free fatty acids. These outcomes underscore the strategic advantage of HA in modifying PG10-C18 for nanoemulsion formulation. Consequently, HA-PG10-C18 stands as a promising emulsifier for encapsulating lipophilic bioactives in functional foods, nutraceuticals, and pharmaceuticals.

Oleanolic acid nanoparticles-stabilized W/O Pickering emulsions: Fabrication, characterization, and delivery application

Water-in-oil (W/O) Pickering emulsions have wide applications in the food industries. However, the existing W/O Pickering particles have disadvantages such as lack of bioactivity and poor stability. In this study, naturally occurring bioactive oleanolic acid (OA) was used as a novel emulsifier for W/O emulsions. Results revealed that rod-like OA could formulate into spherical nanoparticles by self-assembly, and then be anchored onto the oil-water interface to stabilize the emulsions. Besides, both OA concentration and internal water fraction (φ) had significant effect on the properties of emulsions. Furthermore, the resulted emulsions exhibited potential application as carriers for epigallocatechin-3-gallate (EGCG), which significantly improved its UV and thermal stability. Meanwhile, it could effectively protect EGCG from gastric digestion, and controlled release in the intestine. This work demonstrated the successful application of OA as a stabilizer for W/O emulsions, and provided valuable insight into its potential as delivery system for hydrophilic instable compounds.

Stabilization mechanisms and digestion properties of Pickering emulsions prepared with tempo-oxidized hyaluronic acid/chitosan nanoparticles: From the perspective of oxidation degree

In this study, the stabilization mechanism and digestion behavior of Pickering emulsion prepared by a combination of chitosan (CS) and TEMPO-oxidized hyaluronic acid (HA) were investigated. Conductometric titration was used to determine the degree of oxidation and carboxylate content of TEMPO-oxidized HA. The results showed that the degree of oxidation increased proportionally with increasing oxidation time, and the electrostatic and hydrogen bonding interactions with CS were significantly enhanced. The results of FTIR and TEM showed the formation of CS/oxidized HA nanoparticles (CS/oxidized-HANPs). In addition, the contact angle of CS/oxidized-HANPs is closed to 77°, thereby providing higher desorption energy at the interface. Rheological results showed that the Pickering emulsion exhibited a gel-like network structure and higher viscosity. In vitro digestion results suggested that the quercetin (Que) bioaccessibility of the CS/oxidation HANps-stabilized Pickering emulsion with an oxidation time of 20 min was better than that of the conventional emulsion prepared with CS alone. The research is expected to develop novel polysaccharide-based Pickering emulsion delivery systems for functional compounds.

Co-delivery of vitamin C and β-carotene in W/O/W emulsions stabilized by modified aggregated insoluble soybean protein hydrolysate-xanthan gum complexes

Environmentally friendly emulsifiers safe for human consumption are urgently needed to stabilize emulsions for applications in the food industry. In this study, we prepared complexes combining modified aggregated insoluble soybean protein hydrolysate (AISPH) mixed with xanthan gum (XG) (0.05-0.3 %, w/v), and further to construct water-in-oil-in-water (W/O/W) emulsions to deliver vitamin C and β-carotene. We observed a decrease in the AISPH α-helix and β-sheet content, surface hydrophobicity, and fluorescence intensity all decreased after binding. In contrast, the particle size and absolute ξ-potential significantly increased, indicating that molecular non-covalent interactions occurred in the solution. The emulsification property of AISPH was also improved by adding XG, and the AISPH-XG-stabilized emulsion showed improved stability, encapsulation efficiency, and rheological properties. Among them, AISPH-XG-0.25-stabilized emulsion exhibited a smaller particle size (8.41 ± 0.49 μm) and the highest encapsulation efficiency for vitamin C (90.03 ± 0.23 %) and β-carotene (70.56 ± 0.06 %). Additionally, simulated gastric digestion indicated that vitamin C and β-carotene bioavailability increased by 3.6 and 5.8 times, respectively. Finally, the emulsion exhibited good pH, ionic, and thermal stability. In general, AISPH-XG-stabilized W/O/W emulsions showed good stability and carrying capacity, providing a theoretical basis for improving their application.

Combination of Machine Learning and Raman Spectroscopy for Determination of the Complex of Whey Protein Isolate with Hyaluronic Acid

Macromolecules and their complexes remain interesting topics in various fields, such as targeted drug delivery and tissue regeneration. The complex chemical structure of such substances can be studied with a combination of Raman spectroscopy and machine learning. The complex of whey protein isolate (WPI) and hyaluronic acid (HA) is beneficial in terms of drug delivery. It provides HA properties with the stability obtained from WPI. However, differences between WPI-HA and WPI solutions can be difficult to detect by Raman spectroscopy. Especially when the low HA (0.1, 0.25, 0.5% w/v) and the constant WPI (5% w/v) concentrations are used. Before applying the machine learning techniques, all the collected data were divided into training and test sets in a ratio of 3:1. The performances of two ensemble methods, random forest (RF) and gradient boosting (GB), were evaluated on the Raman data, depending on the type of problem (regression or classification). The impact of noise reduction using principal component analysis (PCA) on the performance of the two machine learning methods was assessed. This procedure allowed us to reduce the number of features while retaining 95% of the explained variance in the data. Another application of these machine learning methods was to identify the WPI Raman bands that changed the most with the addition of HA. Both the RF and GB could provide feature importance data that could be plotted in conjunction with the actual Raman spectra of the samples. The results show that the addition of HA to WPI led to changes mainly around 1003 cm-1 (correspond to ring breath of phenylalanine) and 1400 cm-1, as demonstrated by the regression and classification models. For selected Raman bands, where the feature importance was greater than 1%, a direct evaluation of the effect of the amount of HA on the Raman intensities was performed but was found not to be informative. Thus, applying the RF or GB estimators to the Raman data with feature importance evaluation could detect and highlight small differences in the spectra of substances that arose from changes in the chemical structure; using PCA to filter out noise in the Raman data could improve the performance of both the RF and GB. The demonstrated results will make it possible to analyze changes in chemical bonds during various processes, for example, conjugation, to study complex mixtures of substances, even with small additions of the components of interest.

Three Stages of Dynamic Assembly Process of Dipeptide-Based Supramolecular Gel Revealed by In Situ Infrared Spectroscopy

The exploration of short peptide-based assembly is vital for understanding protein-misfolding-associated diseases and seeking strategies to attenuate aggregate formation. While, the molecular mechanism of their structural evolution remains poorly studied in view of the dynamic and unpredictable assembly process. Herein, infrared (IR) spectroscopy, which serves as an in situ and real-time analytical technique, was intelligently employed to investigate the mechanism of phase transition and aggregate formation during the dynamic assembly process of diphenylalanine. Combined with other spectroscopy and electron microscopy technologies, three stages of gel formation and the main driving forces in different stages were revealed. A variety of stoichiometric methods such as continuous wavelet transform, principal component analysis, and two-dimensional correlation spectroscopy techniques were conducted to analyze the original time-dependent IR spectra to obtain detailed information on the changes in the amide bands and hydration layer. The microenvironment of hydrogen bonding among amide bands was significantly changed with the addition of pyridine derivatives, resulting in great differences in the properties of co-assembled gels. This work not only provides a universal analytical way to reveal the dynamic assembly process of dipeptide-based supramolecular gel but also expands their applications in supramolecular regulation and high-throughput screens in situ.

Emulsification and encapsulation properties of conjugates formed between whey protein isolate and carboxymethyl cellulose under acidic conditions

In this study, carboxymethyl cellulose (CMC) was used to interact with whey protein isolate (WPI) to prepare conjugates as emulsifiers and embedding agents, which can be used under acidic conditions. Firstly, the effects of ratios and pH values on the formation of WPI-CMC conjugates were investigated. The turbidity and particle size of WPI were reduced in the presence of CMC at pH 4.6 (near the isoelectric point). Then the characterization of physicochemical properties indicated that electrostatic interactions played a major role in the formation of WPI-CMC conjugates, thereby changing the structure and function of conjugates. CMC and WPI reached the optimal aggregation state at pH 4.6 and a ratio of 4:1. The conjugates exhibited excellent emulsifying activity and stability for the oil-in-water emulsions. WPI-CMC conjugates also could provide protection to allicin by preventing degradation under environmental stresses, while maintaining its antioxidant activity.

Soy protein isolate/carboxymethyl cellulose sodium complexes system stabilized high internal phase Pickering emulsions: Stabilization mechanism based on noncovalent interaction

The interactions between carboxymethyl cellulose sodium and proteins can regulate the interfacial and rheological properties of HIPEs, which plays a leading role in the stabilities of HIPEs. This article prepared various ratios of soluble soy protein isolate/carboxymethyl cellulose sodium (SPI/CMC) complexes in different proportions and examined the impact of various ratios of complexes on the structure and interface properties of complexes systems. Additionally, it explored the co-emulsification mechanism of HIPEs using SPI and CMC. At appropriate ratios of SPI/CMC, SPI and CMC mainly combine through non covalent binding and form complexes with smaller particle sizes and stronger electrostatic repulsion. The interfacial properties indicated that adding appropriate CMC increased the pliability and reduced the interfacial tension, while also enhancing the wettability of SPI/CMC complexes. At the ratio of 2:1, the SPI/CMC complexes-stabilized HIPPEs exhibited smaller oil droplets size, tighter droplet packing, and thicker interfacial film through the bridging of droplets and the generation of stronger gel-like network structures to prevent the coalescence/flocculation of droplets. These results suggested that the appropriate ratios of SPI/CMC can improve the physical stability of HIPEs by changing the structure and interface characteristics of the SPI/CMC complexes. This work provided theoretical support for stable HIPEs formed with protein-polysaccharide complexes.

Analysis of non-covalent interaction between β-lactoglobulin and hyaluronic acid under ultrasound-assisted treatment: Conformational structures and interfacial properties

Hyaluronic acid (HA) used as a food ingredient is gaining acceptance and popularity. However, the studies available for the effect of HA concentrations on the properties of β-lactoglobulin (β-LG) were limited. In this study, we investigated that the molecular characterization and functional properties of the complex formed by the non-covalent binding of β-LG and HA, as well as the ultrasound-assisted treatment at acidic pH. The optimal pH and ratio of β-LG/HA were set as 7 and 4:1, respectively. The fluorescence spectroscopy, circular dichroism spectroscopy, and molecular docking results revealed that the addition of HA and ultrasound induced a decrease in random coil and α-helix and an increase in β-sheet contents in β-LG. By the complexation with HA, the thermal stability, freezing stability, and antioxidant properties of β-LG were all improved under ultrasound treatment. The results of the present study can be useful for the modulation of HA based biopolymer complexes and the exploitation as encapsulating or structuring agents in food industry.

Noncovalent interactions between biomolecules facilitated their application in food emulsions' construction: A review

The use of biomolecules, such as proteins, polysaccharides, saponins, and phospholipids, instead of synthetic emulsifiers in food emulsion creation has generated significant interest among food scientists due to their advantages of being nontoxic, harmless, edible, and biocompatible. However, using a single biomolecule may not always meet practical needs for food emulsion applications. Therefore, biomolecules often require modification to achieve ideal interfacial properties. Among them, noncovalent interactions between biomolecules represent a promising physical modification method to modulate their interfacial properties without causing the health risks associated with forming new chemical bonds. Electrostatic interactions, hydrophobic interactions, and hydrogen bonding are examples of noncovalent interactions that facilitate biomolecules' effective applications in food emulsions. These interactions positively impact the physical stability, oxidative stability, digestibility, delivery characteristics, response sensitivity, and printability of biomolecule-based food emulsions. Nevertheless, using noncovalent interactions between biomolecules to facilitate their application in food emulsions still has limitations that need further improvement. This review introduced common biomolecule emulsifiers, the promotion effect of noncovalent interactions between biomolecules on the construction of emulsions with different biomolecules, their positive impact on the performance of emulsions, as well as their limitations and prospects in the construction of biomolecule-based emulsions. In conclusion, the future design and development of food emulsions will increasingly rely on noncovalent interactions between biomolecules. However, further improvements are necessary to fully exploit these interactions for constructing biomolecule-based emulsions.

Tuning whey protein isolate/hyaluronic acid emulsion gel structure to enhance quercetin bioaccessibility and in vitro digestive characteristics

Quercetin (Que), a health-promoting polyphenol, has limited applicability in food products due to its susceptibility to degradation in the gastrointestinal tract. To overcome this problem, Que-loaded emulsion gels were produced using whey protein isolate (WPI) and hyaluronic acid (HA) by combining heating and CaCl2 treatment. The effects of HA addition on the structural and rheological properties of the emulsion gels were evaluated, and the protective effect of the gel on Que under simulated digestion was investigated in vitro. Microstructural observations indicated that HA leads to a more compact and uniform network structure, which significantly enhances the textural and rheological properties of emulsion gels. In vitro digestion experiments revealed that WPI-HA emulsion gels exhibited a higher Que bioaccessibility (55.01%) compared to that produced by WPI alone (21.26%). This innovative delivery carrier has potential applications in food products to accomplish sustained nutrient release along with improved stability.

Properties of Heat-Assisted pH Shifting and Compounded Chitosan from Insoluble Rice Peptide Precipitate and Its Application in the Curcumin-Loaded Pickering Emulsions

Curcumin exhibits antioxidant and antitumor properties, but its poor chemical stability limits its application. Insoluble peptide precipitates formed by proteolysis of rice glutelin are usually discarded, resulting in resource waste. The coupled treatment of heat-assisted pH shifting and compounded chitosan (CS) was used to fabricate rice peptide aggregate-chitosan complexes (RPA-CS). The structure, interfacial behavior, emulsion properties, and digestibility of curcumin-loaded RPA-CS Pickering emulsions were investigated. Increasing the CS concentration led to lower interfacial tension but larger particle size, and the three-phase contact angle of the RPA-CS complexes approached 90°. Quartz crystal microbalance with dissipation (QCM-D) indicated that RPA-CS complexes with 6 g·kg-1 of CS (RPA-CS6) had the highest K1 (0.592 × 106 Hz-1) and K4 (0.487 × 106 Hz-1), suggesting that the softest interfacial layers were formed. The solid-liquid balance of RPA-RPA-CS emulsions was lower than 0.5, declaring that they had more elastic behavior than that of RPA emulsions. RPA-RPA-CS4-and RPA-CS6 emulsions had better storage stability, lower FFA release (79.8% and 76.3%, respectively), and higher curcumin bioaccessibility (65.2% and 68.2%, respectively) than RPA emulsions. This study showed that a low-value insoluble rice peptide precipitate could be used as a valuable emulsifier in foods, which may increase the economics and sustainability of the food supply.

Mechanism for improving coconut milk emulsions viscosity by modifying coconut protein structure and coconut milk properties with monosodium glutamate

In this study, monosodium glutamate (MSG) was used to improve the viscosity of coconut milk and the underlying mechanism was explored by investigating the changes in structures of coconut milk protein and physicochemical properties of coconut milk. Firstly, the effect of MSG on the properties of coconut milk was studied. The results showed that MSG increased the pH and zeta potential, reduced the particle size, thus enhancing the droplet interaction and increasing the viscosity of coconut milk. Subsequently, the effects of MSG on the structure and properties of coconut proteins (CP) were investigated. FTIR spectroscopy and circular dichroism spectroscopy showed that MSG was able to change the secondary structure of CP. The results of SDS-PAGE showed that MSG was able to bind to CP to form a larger molecular weight protein, thus improving the viscosity of coconut milk. Moreover, MSG was also able to increase the water-binding capacity of CP. In addition, molecular docking and driving force analysis revealed that hydrogen bonds, electrostatic forces, disulfide bonds, and hydrophobic interactions are the main interactions between MSG and CP. Studying the effect of MSG on the viscosity of coconut milk provides theoretical support to improve the viscosity of other plant protein emulsions.

Pentacyclic triterpene-loaded emulsion stabilized by Agaricus blazei Murill polysaccharides: Factorial design and cytoprotection study

In this study, pentacyclic triterpene-loaded emulsions were stabilized by polysaccharides from Agaricus blazei Murill mushroom (PAb). The drug-excipient compatibility results by Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) showed the absence of physicochemical incompatibilities. The use of these biopolymers at 0.75 % led to obtaining emulsions with droplets smaller than 300 nm, moderate polydispersity, and ζ-potential >30 mV in modulus. The emulsions presented high encapsulation efficiency, suitable pH for topical application, and absence of macroscopic signs of instability during 45 days. Morphological analysis suggested the deposition of thin layers of PAb around the droplets. The encapsulation of pentacyclic triterpene in emulsions, stabilized by PAb, improved the cytocompatibility of this drug against PC12 and murine astrocyte cells. There was a reduction in cytotoxicity, which resulted in a lower accumulation of intracellular reactive oxygen species and maintenance of the mitochondrial transmembrane potential. Based on these results, it is estimated that PAb are promising biopolymers for the emulsions' stabilization by improving their physicochemical and biological properties.

Emulsions stabilised by casein and hyaluronic acid: Effects of high intensity ultrasound on the stability and vitamin E digestive characteristics

This study aimed to prepare an emulsion stabilised by an ultrasound-treated casein (CAS)-hyaluronic acid (HA) complex and to protect vitamin E during in vitro digestion. It was found that high-intensity ultrasound (HIU) treatment significantly changed the hydrogen bonding, electrostatic interaction and hydrophobic interaction between CAS and HA, reduced the particle size of the CAS-HA complex, increased the intermolecular electrostatic repulsion, and thus significantly improved the emulsifying properties of the CAS-HA complex. Meanwhile, the creaming index (CI) and confocal laser scanning microscopy images showed that the stability of the CAS-HA-stabilised emulsion was the best when treated at 150 W for 10 min, which could be attributed to the enhanced adsorption capacity of the CAS-HA complex at the oil-water interface and the viscosity of the formed emulsion. In vitro digestion experiments revealed that the emulsion stabilised by the ultrasound-treated CAS-HA complex had a good protective effect on vitamin E. This study is significant for the development of emulsions for the delivery of lipophilic nutrients.