Tuning egg yolk granules/sodium alginate emulsion gel structure to enhance β-carotene stability and in vitro digestion property

Emulsion gels prepared from Longzhua mushroom polysaccharides with self-gelling properties as β-carotene carriers: Stability and in vitro digestibility of β-carotene

β-Carotene is widely used in food systems because of its biological activity; however, β-carotene has poor chemical stability and low bioavailability. Thus, researchers use encapsulated delivery systems to overcome these disadvantages. In this study, we prepared emulsion gels to encapsulate β-carotene, using Longzhua mushroom polysaccharide (LMP), which can autonomously form weak gels. The LMP emulsion gel (LEG) exhibited a high water-holding capacity of up to 95.06 %. All samples showed adequate storage stability for 28 days. Increasing the polysaccharide content in the emulsion gel enhanced the encapsulation efficiency of β-carotene (96.76 %-98.27 %), the release of free fatty acids (68.21 %-81.44 %), and the photostability (80.65 %-91.27 %), thermal stability (73.84 %-97.08 %), and bioaccessibility (18.28 %-30.26 %) of β-carotene. In conclusion, LEG is a promising fat-soluble material that can be used for food-grade encapsulated delivery systems.

Improvement of physicochemical properties and quercetin delivery ability of fermentation-induced soy protein isolate emulsion gel processed by ultrasound

This study aimed to investigate the effects of ultrasonic treatment at different powers on the physicochemical properties, microstructure and quercetin delivery capacity of fermentation-induced soy protein isolate emulsion gel (FSEG). The FSEG was prepared by subjecting soy protein isolate (SPI) emulsion to ultrasonic treatment at various powers (0, 100, 200, 300, and 400 W), followed by lactic acid bacteria fermentation. Compared with the control group (0 W), the FSEG treated with ultrasound had higher hardness, water holding capacity (WHC) and rheological parameters. Particularly, at an ultrasonic power of 300 W, the FSEG had the highest hardness (101.69 ± 4.67 g) and WHC (75.20 ± 1.07%) (p < 0.05). Analysis of frequency sweep and strain scanning revealed that the storage modulus (G') and yield strains of FSEG increased after 300 W ultrasonic treatment. Additionally, the recovery rate after creep recovery test significantly increased from 18.70 ± 0.49% (0 W) to 58.05 ± 0.54% (300 W) (p < 0.05). Ultrasound treatment also resulted in an increased β-sheet content and the formation of a more compact micro-network structure. This led to a more uniform distribution of oil droplets and reduced mobility of water within the gel. Moreover, ultrasonic treatment significantly enhanced the encapsulation efficiency of quercetin in FSEG from 81.25 ± 0.62 % (0 W) to 90.04 ± 1.54% (300 W). The bioaccessibility of quercetin also increased significantly from 28.90 ± 0.40% (0 W) to 42.58 ± 1.60% (300 W) (p < 0.05). This study enriches the induction method of soy protein emulsion gels and provides some references for the preparation of fermented emulsion gels loaded with active substances.

Undenatured type II collagen nanofibrils with sodium alginate coating: Structural characterization, physicochemical properties and capability to load curcumin

In this study, the structural design and physicochemical property enhancement of undenatured type II collagen (UC-II) nanofibrils with sodium alginate (SA) coating induced by calcium ions (Ca2+) were investigated. The research aimed to elucidate the impact of Ca2+ concentration on the morphology, thermal stability, and digestive resistance, as well as to assess the potential of UC-II/SA nanofibrils as a delivery system for curcumin (Cur). A series of Ca2+ concentrations (1-9 mM) were methodically applied to optimize the condition that maintains the triple-helical structure of UC-II, thereby enhancing its functional properties. It was found that the Ca2+ level up to 5 mM effectively preserved the structural integrity and improved thermal stability of UC-II, with the added benefit of ensuring the substantial delivery of active fragment to small intestine (70.7 %), which was 3.43 times greater than that of uncoated UC-II. Moreover, incorporating Cur into the UC-II/SA nanofibrils resulted in a 300 times increase in Cur solubility and showcased the superior dispersion stability, antioxidant activity, and sustained release profile during simulated digestion. These findings underscored the dual functionality of the UC-II/SA system as both a stabilizing agent for UC-II nanofibrils and an efficient carrier for Cur delivery.

Impact of κ-Carrageenan on the Cold-Set Pea Protein Isolate Emulsion-Filled Gels: Mechanical Property, Microstructure, and In Vitro Digestive Behavior

More understanding of the relationship among the microstructure, mechanical property, and digestive behavior is essential for the application of emulsion gels in the food industry. In this study, heat-denatured pea protein isolate particles and κ-carrageenan were used to fabricate cold-set emulsion gels induced by CaCl2, and the effect of κ-carrageenan concentration on the gel formation mechanism, microstructure, texture, and digestive properties was investigated. Microstructure analysis obtained by confocal microscopy and scanning electron microscopy revealed that pea protein/κ-carrageenan coupled gel networks formed at the polysaccharide concentration ranged from 0.25% to 0.75%, while the higher κ-carrageenan concentration resulted in the formation of continuous and homogenous κ-carrageenan gel networks comprised of protein enriched microdomains. The hydrophobic interactions and hydrogen bonds played an important role in maintaining the gel structure. The water holding capacity and gel hardness of pea protein emulsion gels increased by 37% and 75 fold, respectively, through increasing κ-carrageenan concentration up to 1.5%. Moreover, in vitro digestion experiments based on the INFOGEST guidelines suggested that the presence of 0.25% κ-carrageenan could promote the digestion of lipids, but the increased κ-carrageenan concentration could delay the lipid and protein hydrolysis under gastrointestinal conditions. These results may provide theoretical guidance for the development of innovative pea protein isolate-based emulsion gel formulations with diverse textures and digestive properties.

Development of high internal phase Pickering emulsions stabilized by egg yolk and carboxymethylcellulose complexes to improve β-carotene bioaccessibility for the elderly

The work aimed to develop the multi-protein mixture of egg yolk as natural particles to stabilize high internal phase Pickering emulsions (HIPPEs) to improve the bioaccessibility of β-carotene in the elderly. The results showed that the depletion attraction drove the adsorption of egg yolk protein particles at the oil-water interface and the formation of osmotic droplet clusters due to the attachment of particle-coated droplets in the dispersed phase, leading to kinetic blocking and stable gelation of HIPPEs. Rheological measurements showed that HIPPEs had shear thinning, low shear stress, viscoelastic properties, and structural recovery properties, which facilitated easy consumption for the elderly. The stability of HIPPEs was verified by ionic and centrifugal stability tests, demonstrating their potential for application to complex gastric environments. HIPPEs have been applied to the International Dysphagia Dietary Standardization Initiative (IDDSI) test and simulated in vitro digestion in older adults, demonstrating their safe swallowability and high β-carotene bioaccessibility. Our findings suggest solutions for food practitioners facing the aging problem and provide new insights for preparing age-friendly foods.

Green tea polysaccharide conjugates and bovine serum albumin have a synergistic effect in improving the emulsification ability

Our previous study revealed that green tea polysaccharide conjugate (gTPC) has emulsion effect, but its emulsifying ability is weak. In order to improve the emulsification ability of gTPC, gTPC and bovine serum albumin (BSA) were combined to form five different mass proportions of the TPC/BSA (TB) complex: TPC/BSA: 5:1, 5:2, 5:3, 5:4, and 5:5 w/w. We observed that the 5:5 w/w TB emulsion was more hydrophobic and surface-active. Furthermore, the emulsions prepared using 50.00 wt% medium-chain triglycerides exhibited the best stability. In addition, the TB emulsion exhibited stability in adverse environments of pH, salt, and heat; in particular, under salt conditions, no significant changes were observed in zeta potential. Subsequently, in vitro simulated digestion experiments were performed to investigate the use of TB emulsions for β-carotene encapsulation. We observed that the encapsulation efficiency for β-carotene was approximately 90.0 %; it was subsequently released in the intestine.

Development and characterization of pH responsive sodium alginate hydrogel containing metal-phenolic network for anthocyanin delivery

Favorable hydrogels can be used as a material to deliver bioactive molecules and improve the stability of bioactive substances, while their safety needs to be improved. In this study, protocatechuic acid (PCA) and Fe3+ were rapidly self-assembled to form a metal-phenolic network under different pH conditions, and then sodium alginate (SA) was added to prepare the SA/PCA/Fe hydrogel without adding other chemical reagents. The structural characteristic of SA/PCA/Fe hydrogel was characterized by infrared spectroscopy, X-ray diffraction analysis and scanning electron microscopy. The results showed that the structures of SA/PCA/Fe hydrogels prepared at different pH values were significantly different. The texture analysis, water-holding measurement and rheological analysis indicated that the SA/PCA/Fe hydrogel showed higher gel strength, water holding capacity and storage modulus. Thermogravimetric analysis illuminated that the SA/PCA/Fe hydrogel enhanced the thermal stability of free anthocyanins through encapsulating anthocyanins. Moreover, in vitro simulated digestion experiment revealed that SA/PCA/Fe hydrogel could control the release of anthocyanins in the simulated gastrointestinal tract. To sum up, this present study might provide a safer and feasible way for the delivery of bioactive substances.

The colloid and interface strategies to inhibit lipid digestion for designing low-calorie food

Although fat is one of the indispensable components of food flavor, excessive fat consumption could cause obesity, metabolism syndromes and an imbalance in the intestinal flora. In the pursuit of a healthy diet, designing fat reducing foods by inhibiting lipid digestion and calorie intake is a promising strategy. Altering the gastric emptying rates of lipids as well as acting on the lipase by suppressing the enzymatic activity or limiting lipase diffusion via interfacial modulation can effectively decrease lipolysis rates. In this review, we provide a comprehensive overview of colloid-based strategies that can be employed to retard lipid hydrolysis, including pancreatic lipase inhibitors, emulsion-based interfacial modulation and fat substitutes. Plants-/microorganisms-derived lipase inhibitors bind to catalytic active sites and change the enzymatic conformation to inhibit lipase activity. Introducing oil-in-water Pickering emulsions into the food can effectively delay lipolysis via steric hindrance of interfacial particulates. Regulating stability and physical states of emulsions can also affect the rate of hydrolysis by altering the active hydrolysis surface. 3D network structure assembled by fat substitutes with high viscosity can not only slow down the peristole and obstruct the diffusion of lipase to the oil droplets but also impede the transportation of lipolysis products to epithelial cells for adsorption. Their applications in low-calorie bakery, dairy and meat products were also discussed, emphasizing fat intake reduction, structure and flavor retention and potential health benefits. However, further application of these strategies in large-scale food production still requires more optimization on cost and lipid reducing effects. This review provides a comprehensive review on colloidal approaches, design, principles and applications of fat reducing strategies to meet the growing demand for healthier diet and offer practical insights for the low-calorie food industry.

Sodium alginate-sodium hyaluronate-hydrolyzed silk for microencapsulation and sustained release of kidney tea saponin: The regulation of human intestinal flora in vitro

Kidney tea saponin (KTS) exhibits considerable efficacy in lowering glucose levels; however, it does not have widespread applications owing to its low intestinal utilization. Therefore, in the present study, we prepared sodium alginate (SA)/sodium hyaluronate (HA)/hydrolyzed silk (SF) gel beads for the effective encapsulation and targeted intestinal release of KTS. The gel beads exhibited an encapsulation rate of 90.67 % ± 0.27 % and a loading capacity of 3.11 ± 0.21 mg/mL; furthermore, the release rate of KTS was 95.46 % ± 0.02 % after 8 h of simulated digestion. Fourier transform infrared spectroscopy revealed that the hydroxyl in SA/HA/SF-KTS was shifted toward the strong peak; this was related to KTS encapsulation. Furthermore, scanning electron microscopy revealed that the gel bead space network facilitates KTS encapsulation. In addition, the ability of KTS and the gel beads to inhibit α-amylase (IC50 = 0.93 and 1.37 mg/mL, respectively) and α-glucosidase enzymes (IC50 = 1.17 and 0.93 mg/mL, respectively) was investigated. In vitro colonic fermentation experiments revealed that KTS increased the abundance of Firmicutes/Bacteroidetes and butyric acid-producing bacteria. The study showed that the developed gel-loading system plays a vital role in delivering bioactive substances, achieving slow release, and increasing the abundance and diversity of intestinal flora.

Alginate Gel-Based Carriers for Encapsulation of Carotenoids: On Challenges and Applications

Sodium alginate is one of the most interesting and the most investigated and applied biopolymers due to its advantageous properties. Among them, easy, simple, mild, rapid, non-toxic gelation by divalent cations is the most important. In addition, it is abundant, low-cost, eco-friendly, bio-compatible, bio-adhesive, biodegradable, stable, etc. All those properties were systematically considered within this review. Carotenoids are functional components in the human diet with plenty of health benefits. However, their sensitivity to environmental and process stresses, chemical instability, easy oxidation, low water solubility, and bioavailability limit their food and pharmaceutical applications. Encapsulation may help in overcoming these limitations and within this review, the role of alginate-based encapsulation systems in improving the stability and bioavailability of carotenoids is explored. It may be concluded that all alginate-based systems increase carotenoid stability, but only those of micro- and nano-size, as well as emulsion-based, may improve their low bioaccessibility. In addition, the incorporation of other biopolymers may further improve encapsulation system properties. Furthermore, the main techniques for evaluating the encapsulation are briefly considered. This review critically and profoundly explains the role of alginates in improving the encapsulation process of carotenoids, suggesting the best alternatives for those systems. Moreover, it provides a comprehensive cover of recent advances in this field.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

High internal phase emulsion gels stabilized by phosphorylated perilla protein isolate for protecting hydrophobic nutrients: Adjusting emulsion performance by incorporating chitosan-protocatechuic acid conjugate

The delivery vehicles based on protein-polysaccharide-polyphenol are promising methods to encapsulate bioactive components with the aim of improving their solubility and bioavailability. In this study, chitosan-protocatechuic acid (CSPA) conjugate interacted with phosphorylated perilla protein isolate (LZPI) to engineer a composite antioxidant interfacial architecture to delay lipid oxidation and regulate the stability and digestion profiles of β-carotene loaded in high internal phase emulsions (HIPEs). Compared to LZPI, the LZPI-CSPA complexes formed by hydrogen bond and electrostatic interaction showed improved wettability and reduced interfacial tension, which facilitated their adsorption at the interface. Furthermore, the addition of CSPA conjugate promoted the formation of interconnected network structure of LZPI-stabilized HIPEs, thereby endowing them with excellent viscoelasticity and storage stability. Moreover, the denser interfacial film based on LZPI-CSPA complexes effectively decreased the contents of lipid hydroperoxide and malondialdehyde in HIPEs, thus improving their oxidation stability. The encapsulation of β-carotene by LZPI-CSPA complex-stabilized HIPEs could further enhance its retention rate against different environmental stresses. After in vitro simulated digestion, the bioaccessibility of β-carotene also improved, reaching the highest value in HIPEs containing 1.5 % CSPA conjugate. These findings will give a reference for the fabrication of delivery vehicles to enhance the stability and bioaccessibility of bioactive components.