Carboxylated chitosan improved the stability of phycocyanin under acidified conditions

Enhancing phycocyanin yield from Spirulina sp. under salt stress using various extraction methods

Phycocyanin, a blue-coloured pigment, predominantly found and derived from Spirulina sp., has gained researchers' interest due to its vibrant hues and other attractive properties like antioxidant and anti-microbial. However, the lack of reliable and sustainable phycocyanin extraction strategies without compromising the quality has hindered the scaling up of its production processes for commercial purposes. Here in this study, phycocyanin was extracted from wet and dry biomass Spirulina sp., using three different physical cell disruption methods (ultrasonication, homogenization, and freeze-thaw cycles) combined with two different buffers (phosphate buffer and acetate buffer) and water (as control). The result showed that the freeze-thaw method combined with acetate buffer produced the highest yield (25.013 ± 2.572 mg/100 mg) with a purity ratio of 0.806 ± 0.079. Furthermore, when subjected to 30% w/v salt stress, 1.9 times higher phycocyanin yield with a purity ratio of 1.402 ± 0.609 was achieved using the previously optimized extraction method.

Stability and bioactivities evaluation of analytical grade C-phycocyanin during the storage of Spirulina platensis powder

C-phycocyanin (C-PC) is a natural high-value blue phycobiliprotein from Spirulina platensis, which has wide biological applications in food, pharmaceutical, and cosmetics. However, the freshness of S. platensis powder (SPP) materials and C-PC purification play critical roles in evaluating the stability and bioactivities of C-PC, which severely affect its commercial application. This study investigated the effect of spray-dried SPP freshness on the biofunctional activities of analytical grade C-PC (AGC-PC). The yield of AGC-PC extracted from spray-dried SPP could reach 101.88 mg/g (75% recovery ratio) after purification by reversed phase high-performance liquid chromatography (RP-HPLC) system. The half-life period (t1/2 ) of AGC-PC stability at 60°C and 8000 lux light could remain 171.70 min and 176.11 h within 6 months storage of spray-dried SPP. The emulsifying activity index (EAI) and foaming capacity (FC) of AGC-PC from fresh-dried SPP showed maximum values of 68.64 m2 /g and 252.9%, respectively. The EC50 of AGC-PC from fresh spray-dried SPP on 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis(3-ethylbenzothiazoline -6-sulfonic acid (ABTS+·) scavenging activity could reach 63.76 and 92.93 mg/L, respectively. The EC50 of AGC-PC from fresh spray-dried SPP on proteinase inhibition and anti-lipoxygenase activity were 302.96 and 178.8 mg/L, respectively. The stability and biofunctional activities of AGC-PC remained stable within 6 months storage of SPP, and then rapidly decreased after 9 months storage due to the disintegration of the trimeric (αβ)3 and hexameric (αβ)6 forms of C-PC. It is concluded that the optimal storage period of SPP for preparation of AGC-PC in commercial use should be less than 6 months. PRACTICAL APPLICATION: The C-phycocyanin (C-PC) from dried Spirulina platensis powder (SPP) has been widely applied in food nutritional, florescent markers, pharmaceuticals, cosmetics, etc, due to its blue color, fluorescence, and antioxidant properties. However, the effect of dried SPP freshness on the stability and functional activity of C-PC has been rarely reported. This study found that the thermostability, photostability, emulsifying, antioxidant, and anti-inflammatory activities of analytical grade C-PC (AGC-PC) significantly decreased after 6 months storage of SPP. Based on investigations, we have proposed that the suitable storage time of dried SPP for preparation of AGC-PC in commercial application should be within 6 months.

Advances in chitosan and chitosan derivatives for biomedical applications in tissue engineering: An updated review

In recent years, chitosan (CS) has received much attention as a functional biopolymer for various applications, especially in the biomedical field. It is a natural polysaccharide created by the chemical deacetylation of chitin (CT) that is nontoxic, biocompatible, and biodegradable. This natural polymer is difficult to process; however, chemical modification of the CS backbone allows improved use of functional derivatives. CS and its derivatives are used to prepare hydrogels, membranes, scaffolds, fibers, foams, and sponges, primarily for regenerative medicine. Tissue engineering (TE), currently one of the fastest-growing fields in the life sciences, primarily aims to restore or replace lost or damaged organs and tissues using supports that, combined with cells and biomolecules, generate new tissue. In this sense, the growing interest in the application of biomaterials based on CS and some of its derivatives is justifiable. This review aims to summarize the most important recent advances in developing biomaterials based on CS and its derivatives and to study their synthesis, characterization, and applications in the biomedical field, especially in the TE area.

Pharmaceutical applications of chitosan in skin regeneration: A review

Skin regeneration is the process that restores damaged tissues. When the body experiences trauma or surgical incisions, the skin and tissues on the wound surface become damaged. The body repairs this damage through complex physiological processes to restore the original structural and functional states of the affected tissues. Chitosan, a degradable natural bioactive polysaccharide, has attracted widespread attention partly owing to its excellent biocompatibility and antimicrobial properties; additionally, a modified form of this compound has been shown to promote skin regeneration. This review evaluates the recent research progress in the application of chitosan to promote skin regeneration. First, we discuss the basic principles of the extraction and preparation processes of chitosan from its source. Subsequently, we describe the functional properties of chitosan and the optimization of these properties through modification. We then focus on the existing chitosan-based biomaterials developed for clinical applications and their corresponding effects on skin regeneration, particularly in cases of diabetic and burn wounds. Finally, we explore the challenges and prospects associated with the use of chitosan in skin regeneration. Overall, this review provides a reference for related research and contributes to the further development of chitosan-based products in cutaneous skin regeneration.

Mechanism of Enhancing Chlorophyll Photostability through Light-Induced Chlorophyll/Phycocyanin Aggregation

Chlorophyll (Chl) is the most abundant pigment in photosynthetic plants, but it is prone to degradation during processing and storage, limiting its usage in the food industry. This study developed a technique for increasing Chl photostability by light-induced Chl/phycocyanin (PC) triple synergistic aggregation. Under continuous illumination settings, the results revealed that the Chl retention increased to 406% compared to the control. A model of Chl/PC complexes was constructed using multiligand molecular docking, and the aggregation mechanism was investigated by quantum chemistry, which demonstrated that PC could provide an ideal central hydrophobic cavity for Chl aggregates and thus further enhance the aggregation of Chl on the basis of Chl/PC complexes. The core driver of the improved photostability of Chl is photoexcitation-induced Chl aggregates. This study enriches our understanding of the interaction mechanism between PC and Chl, and we hope that this study can provide broader ideas for the development of natural pigment products.