Effect of nano-TiO2 particle size on the bonding performance and film-forming properties of starch-based wood adhesives

Properties and release behavior of sodium alginate-based nanocomposite active films: Effects of particle size of IRMOF-3

Nanoparticles are used as fillers to improve the properties of biopolymers, and their particle size is an important parameter. This work aims to investigate the effect of particle size of isoreticular metal-organic framework-3 (IRMOF-3) on the mechanical, physical, and release properties of sodium alginate (SA)-based composite active film. In our study, IRMOF-3 with six different particle sizes was synthesized by introducing additives. IRMOF-3 loading with carvacrol (IRMOF-3/CA nanoparticles) was incorporated into the SA matrix to prepare the composite film. The characterization and testing results of films showed that the particle size of nanoparticles affected the physical morphology and chemical structure of the film. Especially smaller nanoparticles uniformly dispersed into the SA matrix more easily, forming a denser and more stable spatial network structure with SA, which could more significantly improve the tensile strength, water vapor barrier, and hydrophobic properties of the film (P < 0.05). In addition, the CA release rate from the active film could be significantly reduced by about 33.90 % even when the smallest particle size of the IRMOF-3/CA nanoparticles was added. Therefore, when IRMOF-3/CA is used as the nano-filler to develop SA-based active film, its particle size has a potential influence on the properties of the film.

Nanotechnology in wood science: Innovations and applications

Application of nanomaterials is gaining tremendous interest in the field of wood science and technology for value addition and enhancing performance of wood and wood-based composites. This review focuses on the use of nanomaterials in improving the properties of wood and wood-based materials and protecting them from weathering, biodegradation, and other deteriorating agents. UV-resistant, self-cleaning (superhydrophobic) surfaces with anti-microbial properties have been developed using the extraordinary features of nanomaterials. Scratch-resistant nano-coatings also improve durability and aesthetic appeal of wood. Moreover, nanomaterials have been used as wood preservatives for increasing the resistance against wood deteriorating agents such as fungi, termites and borers. Wood can be made more resistant to ignition and slower to burn by introducing nano-clays or nanoparticles of metal-oxides. The use of nanocellulose and lignin nanoparticles in wood-based products has attracted huge interest in developing novel materials with improved properties. Nanocellulose and lignin nanoparticles derived/synthesized from woody biomass can enhance the mechanical properties such as strength and stiffness and impart additional functionalities to wood-based products. Cellulose nano-fibres/crystals find application in wide areas of materials science like reinforcement for composites. Incorporation of nanomaterials in resin has been used to enhance specific properties of wood-based composites. This review paper highlights some of the advancements in the use of nanotechnology in wood science, and its potential impact on the industry.

Preparation of reed fibers reinforced graft-modified starch-based adhesives based on quantum mechanical simulation and molecular dynamics simulation

Starch is a biomass polymer material with a high yield and comprehensive source. It is used as a raw material for preparing adhesives because of its highly active hydroxyl group. However, poor adhesion and water resistance hinder the application of starch-based adhesives (SBAs). Based on this, the starch was modified through graft copolymerization with itaconic acid as a cross-linking agent, methyl methacrylate and methyl acrylate as copolymers. Additionally, reed fibers were synergistically modified with polydopamine deposition to prepare an environmentally friendly SBA used in plywood production. Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (1H NMR), X-ray diffraction (XRD), and thermogravimetric analysis (TG) demonstrate that copolymerization of methyl methacrylate and methyl acrylate with starch improves the shear strength, water resistance, and thermal stability of the SBA. Compared to unmodified starch, the modified SBA exhibits a 129 % increase in dry strength and achieves a wet strength of 1.36 MPa. Fukui function, Frontier orbit theory, and molecular dynamics simulation have shown that itaconic acid promotes the copolymerization of starch and acrylate monomers. The modified starch has fewer hydrogen bonds, less order, and a denser macromolecular network structure, which provides a reference for studying the molecular interaction mechanisms of SBAs.

Development of eco-friendly antifungal and antibacterial adhesive derived from modified cassava starch waste/polyvinyl alcohol containing green synthesized nano-silver

Environmentally friendly biopolymer-based wood adhesives are an inevitable trend of wood product development to replace the use of harmful formaldehyde-based adhesives. In this research, a new eco-friendly modified cassava starch waste-based adhesive via carboxymethylation (CMS), and blending with polyvinyl alcohol (PVA), tannic acid (TA) and green synthesized silver nanoparticles (AgNPs) was prepared. The effects of TA content on green synthesis of AgNPs (Ag-TA) and bio-adhesive nanocomposite properties were investigated. The use of 5 wt% TA for AgNPs synthesis (Ag-TA-5) resulted in a uniform particle size distribution. The plywood prepared with Ag-TA-5 provided the highest dry and wet shear strength at 1.95 ± 0.11 MPa and 1.38 ± 0.3 MPa, respectively. The water absorption and thickness swelling of this plywood remarkably decreased up to 10.99% and 6.79%, respectively. More importantly, the presence of Ag-TA in CMS/PVA adhesive successfully inhibited the invasion of mold and bacteria. Based on the cyclic delamination test, the adhesive bond durability of bio-adhesive containing Ag-TA-5 could meet the requirement of the AITC Test T110-2007 and was comparable to commercial adhesives. The added advantage of the prepared bio-adhesive was its synthesis from agro-waste products and possible economically viable production at industrial level.

Soy Protein/Polyvinyl-Alcohol (PVA)-Based Packaging Films Reinforced by Nano-TiO2

This work was investigated to prepare a reinforcing composite packaging film composited of soy protein/polyvinyl alcohol (PVA) and nano-TiO2. First, different film compositions were designed by the particle size of nano-TiO2, concentration of nano-TiO2, concentration of polyvinylpyrrolidone (PVP, a dispersing agent for nano-TiO2), and pH of film casting solution. Then, the film composition that yielded the optimal physical properties was identified using orthogonal array design single-factor experiments, considering its physical properties, including tensile strength, elongation, water absorption, water vapor transmission, oxygen permeation, thermal property, and film morphology. The results displayed that the optimal film composition was (1) soy protein/PVA film with 2.5 wt% nano-TiO2, (2) 30 nm nano-TiO2 particle size, (3) 1.5 wt% PVP, and (4) pH 6.0 of film-forming solution. It yielded tensile strength of 6.77 MPa, elongation at break rate of 58.91%, and water absorption of 44.89%. Last, the films were characterized by scanning electron microscope (SEM) and differential scanning calorimetry (DSC). SEM analysis showed that compared with the film without TiO2, the film containing TiO2 has a smoother surface, and DSC determined that adding nano-TiO2 can improve the thermostability of soy protein/PVA film. Therefore, the film prepared in this paper is expected to provide a new theoretical basis for use in the packaging industry.