The effect of sweet tea polysaccharide on the physicochemical and structural properties of whey protein isolate gels

Effect of sanxan as novel natural gel modifier on the physicochemical and structural properties of microbial transglutaminase-induced mung bean protein isolate gels

Mung bean protein isolate (MBPI) has attracted much attention as an emerging plant protein. However, its application was limited by the poor gelling characteristics. Thus, the effect of sanxan (SAN) on the gelling behavior of MBPI under microbial transglutaminase (MTG)-induced condition were explored in this study. The results demonstrated that SAN remarkably enhanced the storage modulus, water-holding capacity and mechanical strength. Furthermore, SAN changed the microstructure of MBPI gels to become more dense and ordered. The results of zeta potential indicated the electrostatic interactions existed between SAN and MBPI. The incorporation of SAN altered the secondary structure and molecular conformation of MBPI, and hydrophobic interactions and hydrogen bonding were necessary to maintain the network structure. Additionally, in vitro digestion simulation results exhibited that SAN remarkably improved the capability of MBPI gels to deliver bioactive substances. These findings provided a practical strategy to use natural SAN to improve legume protein gels.

Insight into the improvement mechanism of gel properties of pea protein isolate based on the synergistic effect of cellulose nanocrystals and calcium ions

Here, the influence and potential mechanism by which cellulose nanocrystals (CNC) collaborated with Ca2+ enhancing the heat-induced gelation of pea protein isolate (PPI) were investigated. It was found that the combination of 0.45% CNC and 15 mM Ca2+ synergistically increased the gel strength (from 14.18 to 65.42 g) and viscoelasticity of PPI while decreased the water holding capacity. The improved particle size, turbidity, and thermostability as well as the reduced solubility, crystallinity, and gel porosity were observed in CNC/CaCl2 composite system. CNC fragments bind to specific amino acids in 11S legumin and 7S vicilin mainly through hydrogen bonding and van der Waals forces. Moreover, changes in the protein secondary structure and enhancement of the molecular interaction induced by CNC and Ca2+ could favor the robust gel network. The results will provide a new perspective on the functional regulation of pea protein and the creation of pea protein gel-based food.

Extraction methods, chemical compositions, molecular structure, health functions, and potential applications of tea polysaccharides as a promising biomaterial: a review

Tea polysaccharides (TPS) have attracted much attention due to their multiple biological activities, excellent biocompatibility and good biodegradability, creating a wide range of potential applications in the food and pharmaceutical industries. However, the high molecular weight and complexity of TPS components have restricted its purification and bioactivity, limiting its potential applications. In this review, the effects of various extraction methods, tea processing, and degree of fermentation on the composition and structure of TPS were thoroughly investigated to overcome this dilemma. Through a comprehensive analysis of in vivo and in vitro studies, the health benefits of TPS are discussed in detail, including antioxidant, anti-obesity, modulation of gut microbial communities, and anticancer bioactivities. Typical structural characterization techniques of TPS are also summarized, and interactions with common food components are discussed in depth, providing a deeper perspective on the overall knowledge of TPS. Finally, this review offers an extensive overview of the wide range of applications of TPS, including its strong emulsifying properties and bio-accessibility, in various fields such as food nutrition, drug delivery, encapsulation films, and emulsifiers. This review aims to provide a theoretical basis for the profound development of TPS for productive utilization.

Effect of curdlan on the gel properties and interactions of whey protein isolate gels

This study investigated the influence of curdlan on the gel properties of whey protein isolate (WPI). Results demonstrated that curdlan significantly improved the water-holding capacity, gel strength and rheological properties of the WPI gels. Moreover, it promoted the unfolding of the molecular structures of WPI, which was manifested by the transition from α-helix to β-sheet, an increase in free sulfhydryl content and a decrease in surface hydrophobicity. Furthermore, 4 % curdlan promoted the formation of WPI with uniform and compact elastic gel network structures, primarily attributed to disulphide bonds, hydrogen bonds and hydrophobic interactions. However, when the addition of curdlan exceeds 4 %, excessive entanglement of curdlan chains and steric hindrance effects hinder the unfolding and folding of protein structures, weaken their interaction, result in a loose network structure and affect the gel properties. In conclusion, this study demonstrates that curdlan can effectively improve the gelling properties of WPI, suggesting its potential application in low-calorie gel-based dairy products.

Preparation of bovine serum albumin-arabinoxylan cold-set gels by glucono-δ-lactone and salt ions double induction

In order to investigate the effect of glucono-δ-lactone (GDL) and different salt ions (Na+ and Ca2+) induction on the cold-set gels of bovine serum albumin (BSA)-arabinoxylan (AX), the gel properties and structure of BSA-AX cold-set gels were evaluated by analyzing the gel strength, water-holding capacity, thermal properties, and Fourier Transform Infrared (FTIR) spectra. It was shown that the best gel strength (109.15 g) was obtained when the ratio of BSA to AX was 15:1. The addition of 1 % GDL significantly improved the water-holding capacity, gel strength and thermal stability of the cold-set gels (p < 0.05), and the microstructure was smoother. Low concentrations of Na+ (3 mM) and Ca2+ (6 mM) significantly enhanced the hydrophobic interaction and hydrogen bonding between BSA and AX after acid induction, and the Na+-induced formation of a denser microstructure with a higher water-holding capacity (75.51 %). However, the excess salt ions disrupted the stable network structure of the cold-set gels and reduced their thermal stability and crystalline structure. The results of this study contribute to the understanding of the interactions between BSA and AX induced by GDL and salt ions, and provide a basis for designing hydrogels with different properties.

Unveiling the rheological and thermal behavior of a novel Salecan and whey protein isolate composite gel

The burgeoning interest in the versatile hydrogel matrix, with its multifarious applications, has spurred extensive research in recent years. However, the implementation of chemically crosslinked gels on a large-scale has been hindered by their poor biosafety and excessive energy consumption. To address these challenges, this study focuses on harnessing physical methods to engineer novel composite hydrogels utilizing natural polysaccharides Salecan and whey protein isolate, obviating the need for structural modification or chemical crosslinking. The aim was to explore the rheological properties to understand their multiple behaviors. Various models, including Power-Law, Herschel-Bulkley, and Arrhenius, were also employed to compare and analyze rheological parameters. This study holds significance as it is the pioneering report on the hydrogels fabricated from Salecan/Whey protein isolate. These gels possess favorable attributes encompassing optimized elasticity, thermal-stability, enhanced injectability, and self-recovery, rendering them suitable for a multitude of applications in the realms of food and biomedicine.

Structure elucidation and anticancer activity of a heteropolysaccharide from white tea

White tea, one of the six traditional teas in China, is made only through natural withering and low-temperature drying processes. It demonstrates diverse pharmacological and health-promoting effects, including antioxidant, antiviral, anticancer, and hypolipidemic activities. Despite the significance of polysaccharides in white tea leaves, their fine structure and physiological functions remain unexplored. In this study, the polysaccharide fragment WTP-80a with anticancer activity was isolated and purified from white tea through water extraction, alcohol precipitation, DEAE-52 ion exchange column chromatography, and sephacryl S-200 dextran gel column chromatography. WTP-80a exhibited a molecular weight of 1.14 × 105 Da and consisted of galactose (Gal), arabinose (Ara), rhamnose (Rha), and glucuronic acid (Glc-UA). The main chain skeleton of WTP-80a contained 3,6)-β-Galp-(1→, 3)-α-Galp-(1→, 5)-α-Araf-(1 → and 3)-α-Glcp-UA-(1→. Branch chains included α-Araf-(1 → and β-Rhap-(1 → connected to the C3 and C6 positions of →3,6)-β-Galp-(1→, respectively. In vitro anticancer experiments revealed that WTP-80a effectively hindered the proliferation, colony formation, migration, and invasion of B16F10 cells. Additionally, it induced apoptosis in B16F10 cells by blocking the G2/M phase, increasing active oxygen content, and reducing mitochondrial membrane potential. These findings provide a solid theoretical foundation for the application of white tea polysaccharides as anticancer products.

Mechanism of l-cysteine-induced fibrous structural changes of soybean protein at different high-moisture extrusion zones

In this study, the fibrous structure formation mechanism of soybean protein during high moisture extrusion processing was investigated using a dead-stop operation, and based on the interaction between soybean protein concentrate (SPC) and L-cysteine (CYS). The thermal properties, SDS-PAGE and particle size distribution of the samples from different extrusion zones were investigated. It was revealed that the addition of a moderate amount of CYS (0.1 %) promoted the fibrous structure formation in the SPC extrudates and optimised the textural properties of the SPC extrudates. In the extruder barrel, addition of CYS (0.1 %) promoted protein depolymerisation and unfolding in the mixing and cooking zones, and facilitated protein aggregation in the die and cooling zones. Protein solubility and raman spectroscopy revealed that disulfide bonds were principally responsible for fibrous structure formation; favoured when the intermolecular disulfide bonds (t-g-t mode) was increased. Finally, the transformation of protein conformation was revealed by secondary structure and surface hydrophobicity, which confirmed that the effect of CYS on protein conformation mainly occurred in the cooling zone. This study provides a theoretical basis for the application of CYS to regulate the fibrous structure of meat analogues.

Soybean isolate protein complexes with different concentrations of inulin by ultrasound treatment: Structural and functional properties

The effects of ultrasound and different inulin (INU) concentrations (0, 10, 20, 30, and 40 mg/mL) on the structural and functional properties of soybean isolate protein (SPI)-INU complexes were hereby investigated. Fourier transform infrared spectroscopy showed that SPI was bound to INU via hydrogen bonding. All samples showed a decreasing and then increasing trend of α-helix content with increasing INU concentration. SPI-INU complexes by ultrasound with an INU concentration of 20 mg/mL (U-2) had the lowest content of α-helix, the highest content of random coils and the greatest flexibility, indicating the proteins were most tightly bound to INU in U-2. Both UV spectroscopy and intrinsic fluorescence spectroscopy indicated that it was hydrophobic interactions between INU and SPI. The addition of INU prevented the exposure of tryptophan and tyrosine residues to form a more compact tertiary structure compared to SPI alone, and ultrasound caused further unfolding of the structure of SPI. This indicated that the combined effect of ultrasound and INU concentration significantly altered the tertiary structure of SPI. SDS-PAGE and Native-PAGE displayed the formation of complexes through non-covalent interactions between SPI and INU. The ζ-potential and particle size of U-2 were minimized to as low as -34.94 mV and 110 nm, respectively. Additionally, the flexibility, free sulfhydryl groups, solubility, emulsifying and foaming properties of the samples were improved, with the best results for U-2, respectively 0.25, 3.51 μmoL/g, 55.51 %, 269.91 %, 25.90 %, 137.66 % and 136.33 %. Overall, this work provides a theoretical basis for improving the functional properties of plant proteins.

Synergistic effects of microbial transglutaminase and apple pectin on the gelation properties of pea protein isolate and its application to probiotic encapsulation

The low gelation capacity of pea protein isolate (PPI) limits their use in food industry. Therefore, microbial transglutaminase (MTG) and apple pectin (AP) were combined to modify PPI to enhance its gelling characteristics, and the mechanism of MTG-induced PPI-AP composite gel generation was investigated. PPI (10 wt%) could not form a gel at 40 °C, while MTG-treated PPI (10 wt%) formed a self-supporting gel at 40 °C. Subsequently, the addition of AP further promoted the crosslinking of PPI and significantly improved the water holding capacity, rheology, and strength of PPI gels, which was attributed to both hydrogen and isopeptide bonds in the composite gel. Additionally, the PPI-AP composite gel showed excellent protection ability, and the survival rate of probiotics could reach over 90%, which could be used as an effective delivery system. This study verified that MTG and AP were efficient in enhancing the functional quality of PPI gels.

Formation of pH-responsive hydrogel beads and their gel properties: Soybean protein nanofibers and sodium alginate

Hydrogel beads prepared from protein nanofibers are popular because of their safety, sleek appearance, and protection of biologically active substances. However, extreme external environmental variations, such as pH and temperature, can limit their practical application. To meet the application requirements of hydrogel beads in different environments, non-covalent mixtures of CaCl2 cross-linked soybean protein nanofibers (SNF) and sodium alginate (SA) were used to prepare hydrogel beads. In the present study, the hardness (782.48 g) and elasticity of hydrogel beads formed at SNF/SA = 7:3 and CaCl2 concentration of 0.1 mol/L were the maximum. Furthermore, the water content and pH swelling also reached a peak (98.68 %, 43.85 g/g) due to the best morphology and regular internal network structure. Meanwhile, the pH-responsive hydrogel beads with added anthocyanins were able to respond to the ambient pH under different temperatures and pH conditions and maintained color stability during 96 h of storage (ΔE < 5). In this experiment, a pH-responsive hydrogel bead based on soybean protein nanofiber (SNF) and sodium alginate (SA) was prepared by simple ionic crosslinking. It provides a theoretical and experimental basis for the future application of plant protein nanofibers as pH-responsive hydrogel materials.

Investigating Texture and Freeze-Thaw Stability of Cold-Set Gel Prepared by Soy Protein Isolate and Carrageenan Compounding

In this study, the purpose was to investigate the effects with different concentrations of carrageenan (CG, 0-0.30%) on the gel properties and freeze-thaw stability of soy protein isolate (SPI, 8%) cold-set gels. LF-NMR, MRI, and rheology revealed that CG promoted the formation of SPI-CG cold-set gel dense three-dimensional network structures and increased gel network cross-linking sites. As visually demonstrated by microstructure observations, CG contributed to the formation of stable SPI-CG cold-set gels with uniform and compact network structures. The dense gel network formation was caused when the proportion of disulfide bonds in the intermolecular interaction of SPI-CG cold-set gels increased, and the particle size and zeta potential of SPI-CG aggregates increased. SG20 (0.20% CG) had the densest gel network in all samples. It effectively hindered the migration and flow of water, which decreased the damage of freezing to the gel network. Therefore, SG20 exhibited excellent gel strength, water holding capacity, freeze-thaw stability, and steaming stability. This was beneficial for the gel having a good quality after freeze-thaw, which provided a valuable reference for the development of freeze-thaw-resistant SPI cold-set gel products.

Effect of polysaccharide concentration on heat-induced Tremella fuciformis polysaccharide-soy protein isolation gels: Gel properties and interactions

The formation of a single soybean protein isolate (SPI) gel is limited by the processing conditions, and has the disadvantages of poor gel property, and it is usually necessary to add other biomacromolecules to improve its property. In this study, we investigated the effects of polysaccharide concentration on gel properties and interaction mechanisms of Tremella fuciformis polysaccharide (TFP)-SPI complexes. It was found that (1) the rheological properties, texture properties, water-holding properties, and thermal stability of TFP-SPI composite gels were improved with the addition of TFP (0.25-2.0 %, w/v) in a concentration-dependent manner; (2) hydrogen bond, the electrostatic interaction, hydrophobic interaction, and disulfide bond in the gel system increased with the increase of TFP concentration; (3) the electrostatic and hydrophobic interactions played an important role in the formation of the TFP-SPI composite gel while hydrogen bond formation was the least contributor to the binary composite gel network. Overall, TFP is not only a critical health food but also a promising structural component for improving the gel properties of SPI.

Changes in physicochemical and structural properties of pea protein during the high moisture extrusion process: Effects of carboxymethylcellulose sodium and different extrusion zones

This study investigated effects of carboxymethylcellulose sodium (CMC) on the conformational evolution of pea protein during the high moisture extrusion process. The morphological observation showed that the addition of CMC facilitated the formation of fibrous structure of pea protein. In comparison with the pea protein in the melting zone and extrudate, the combination of CMC increased the denaturation enthalpy of pea protein by 2.09 % and 2.34 %. Compared with the material in the mixing zone, the degree of grafting between CMC and pea protein in the die was enhanced by 98.95 %. In general, the supplementation of CMC depressed the exposure of hydrophobic groups in the pea protein. In the extrusion barrel, the CMC increased the unfolding of protein molecular chains while it promoted the refolding of protein chains in the die. For the extrudate, the addition of CMC decreased the contents of α-helix and β-sheet of pea protein by 9.67 % and 6.93 % while the contents of β-turn and random coil were increased, leading to changes in the molecular weight distribution of protein molecules. In conclusion, these results provided new strategies toward producing the high-quality pea protein-based meat analogues by adding CMC.

Rheological and physicochemical properties of heat-induced ovalbumin gels in presence of sodium carboxymethyl cellulose

In this study, the effect of sodium carboxymethylcellulose (CMC-Na) on the rheological and physicochemical properties of heat-induced ovalbumin (OVA) gels was evaluated. The OVA/CMC-Na composite gels were prepared by heat-induced (85 °C, pH 7.0) a mixture of CMC-Na (0, 0.2, 0.4, 0.8 and 1%) and OVA. The results revealed that the addition of CMC-Na dramatically reduced the springiness and hardness of the composite gels, while slightly enhancing the intermolecular hydrogen bonding interactions, which facilitated the improvement of the softness of the gels. It can be observed by SEM that the added CMC-Na was stacked on the surface of the OVA, resulting in visible "linear bumps". All gel samples exhibited shear-thinning behavior. The apparent viscosity of the composite gels increased with the addition of CMC-Na, and the OVA gel with 1% CMC-Na showed the highest apparent viscosity and the lowest storage modulus (G'). Additionally, low field nuclear magnetic resonance (LF-NMR) measurements indicated that the increasing CMC-Na boosted the water mobility of the composite gel. This study offers a novel approach to the development of ovalbumin-based soft gel foods, especially for certain populations with swallowing difficulties.