Fructus cannabis protein extract powder as a green and high effective corrosion inhibitor for Q235 carbon steel in 1 M HCl solution

Effect of Substituents on Chitosan-Derived Sustainable Corrosion Inhibitors: Experimental and Computational Studies of Inhibition and Adsorption Performance

This work involves the synthesis of two chitosan derivatives by reacting chitosan, extracted from shrimp shells in eastern Morocco, with 2-nitrobenzaldehyde via a Schiff base reaction. An amino derivative of chitosan was then produced by reducing the imine group created by sodium borohydride. We investigated the molecular weight (Mw), crystallinity index (CrI), and degree of deacetylation (DDA) of the isolated chitosan, among other characteristic features. Thermogravimetric analysis (TGA), X-ray diffraction (XRD), and attenuated total reflectance Fourier transform infrared spectroscopy (FTIR-ATR) were used to characterize the extracted chitosan (CS), 2-nitroben-chitosan Schiff derivative (CS-2NI), and chitosan amino derivative (CS-2NA). In a corrosive medium of 1 M HCl, the three ligands, CS, CS-2NI, and CS-2NA, were used as mild steel corrosion inhibitors. Electrochemical studies were used to analyze the surface shape and assess the inhibitory efficiency. They reveal a significant inhibitory efficiency of 92.31% for the CS-2NI derivative, highlighting the effectiveness of the imine group (═N-) and the nitro group (-NO2) compared to the two amino groups (-NH2 and -NH-) present in the CS-2NA derivative. To support experimental research, a computational study was carried out that combined the simulated annealing technique. The three inhibitors behave as mixed-type corrosion inhibitors. Thermodynamic analyses and adsorption studies revealed that the tested inhibitors create covalent bonds with the steel surface (chemisorption) as well as physical interactions (physisorption), in accordance with the Langmuir model. The identification of the ligands' adsorption sites on the steel surface was made more accessible by computational methods, demonstrating the relationship between the inhibitory properties and the chemical structure of these biodegradable and biocompatible biopolymers.

Cellulose nanocrystals (CNCs) with different degrees of amination to enhance tolerance to Fe (III) and enhance oil displacement performance

Cellulose nanocrystals (CNCs) have been widely concerned in enhanced oil recovery (EOR) due to their abundant resources, small size and easy modification. In crude oil extraction, Fe (III) is increasingly produced. However, CNCs are very sensitive to Fe (III) and easy to aggregate, which brings obstacles to the application of CNCs. In order to improve the tolerance of CNCs to Fe (III), the surface of CNCs was modified with Aminopropyltrimethoxysilane (APTMS), N-[3-Trimethoxysilyl)propyl]ethylenediamine (TMPED) and N-[3-(trimeth-oxysilyl)propyl]diethylenetriamine (TMPDET), respectively. The products were named CNC-APTMS, CNC-TMPED and CNC-TMPDET. The N content in CNC-APTMS, CNC-TMPED and CNC-TMPDET are 1.36 wt%, 2.03 wt% and 2.17 wt%, respectively. The adsorption amount of Fe (III) by CNCs, CNC-APTMS, CNC-TMPED and CNC-TMPDETDT are ~155 mg/g, ~ 13 mg/g, ~ 29 mg/g and ~ 18 mg/g, respectively. This indicates that compared to CNCs, the modified CNCs improve significantly the tolerance to Fe (III). Moreover, compared to CNCs, in the presence of Fe (III), there is less remaining oil in the glass model after modified CNCs dispersion flooding. The improvement of tolerance to Fe (III) and the excellent oil displacement performance of the modified CNCs in the presence of Fe (III) make them the potential green oil displacement agents.

Eco-friendly modified chitosan as corrosion inhibitor for carbon steel in acidic medium: Experimental and in-depth theoretical approaches

The industrial and medical sectors have a great interest in chitosan due to its unique properties, such as abundance, renewability, non-toxicity, antibacterial activity, biodegradability, and polyfunctionality. In this work, two modified chitosan Schiff bases (ChSB-1 and ChSB-2) were made using condensation methods, and their potential as corrosion inhibitor for carbon steel in 1 M HCl was investigated using chemical and electrochemical techniques. The ChSB-1 and ChSB-2 inhibitors exhibited remarkable inhibitory performance, as evidenced by the mass loss data, which showed 89.3 % and 91.5 % efficacy at 1 mM concentration, respectively. Because of the electron-donor substituent of methoxy (-OCH3), ChSB-2's active sites have more delocalized electrons than ChSB-1's. The PDP results showed that both ChSB-1 and ChSB-2 inhibitors have anti-corrosion characteristics because heteroatoms caused a protective layer to develop that functioned as mixed-typed inhibitors. The calculated adsorption-free energy ∆Gadso for ChSB-1 and ChSB-2, respectively, was found -36.1 and - 37.1 kJ mol-1. The ChSB-1 and ChSB-2 inhibitors adsorb on carbon steel in acidic conditions through physisorption and chemisorption interactions, and their adsorption is in line with the Langmuir adsorption model. Inhibited and uninhibited metallic surfaces were subjected to surface morphological assessments using contact angle (CA), the scanning electron microscopy and the energy dispersive X-ray (SEM/EDX) analysis. The DMol3 part of Materials Studio 7.0 software was used to perform the quantum chemical calculations based on DFT to visualize the structural features. Studies from quantum chemistry suggest the possibility of surface interaction between the unoccupied orbitals of the metal surface and the inhibitors ChSB-1, ChSB-2, ChSB-1H+, and ChSB-2H+. The results clearly show that the two inhibitors work well as environmentally friendly carbon steel corrosion inhibitors in acidic medium. This could be advantageous for industrial procedures such as pickling, cleaning, acidizing oil drilling in oil wells, and using citrus to de-sediment boilers.

Extract of Silybum marianum (L.) Gaertn Leaves as a Novel Green Corrosion Inhibitor for Carbon Steel in Acidic Solution

In this work, leaves of Silybum marianum (L.) Gaertn were extracted by a one-step extraction method using ethanol as a solvent, and the Silybum marianum (L.) Gaertn extract (SMGE) was firstly employed as a green corrosion inhibitor for carbon steel in 0.5 mol/L H2SO4. The corrosion inhibition performance was studied using weight loss and electrochemical methods, and the anti-corrosion mechanism of SMGE is further analyzed through some surface characterizations and theoretical calculations. The results indicate that SMGE can act as a mixed-type corrosion inhibitor and possess superior corrosion inhibition performance for carbon steel in H2SO4 solution, and the optimum corrosion inhibition efficiency reached 93.06% at 800 ppm SMGE combined with 60 ppm KI. The corrosion inhibition efficiency increased with the rising inhibitor concentration. Surface characterizations illustrated that the inhibitor could physico-chemically adsorb on a metal surface, forming a hydrophobic, protective film.

Plant extracts as green corrosion inhibitors for different kinds of steel: A review

Corrosion significantly threatens the structural integrity of steel-based constructions like buildings and industrial units. Traditional corrosion inhibitors, such as chromates, are associated with environmental and health risks. This has led to a growing interest in environmentally sustainable alternatives, with plant extracts emerging as promising candidates. These extracts are widely available, sustainable, and eco-friendly. This review aims to explore the potential of plant extracts as corrosion inhibitors for various types of steel. After examining current scientific literature, over 40 plant extracts have been identified that exhibit corrosion inhibition properties. These extracts have been thoroughly analyzed to understand their effectiveness in preventing corrosion. The review elucidates the mechanisms by which these extracts interact with metal surfaces to form protective layers, effectively hindering the corrosion process. In this review, we focus on the challenges associated with utilizing plant extracts as inhibitors, including optimal extract concentration and temperature considerations.

Turning Waste into Treasure: Invasive Plant Ambrosia trifida L Leaves as a High-Efficiency Inhibitor for Steel in Simulated Pickling Solutions

High toxicity is the main reason for the limited application of traditional corrosion inhibitors. Herein, it is critical to find a green, efficient, and long-term stable alternative substitute for the hazardous and conventional corrosion inhibitor. Ambrosia trifida L is widely distributed in fields and riverside wetlands as an invasive plant in China. According to the concept of turning waste into treasure, the extract of Ambrosia trifida L leaves (ATL) has the potential to address this issue due to its natural origin and abundant presence of heterocyclic organics. Therefore, ATL, as a green corrosion inhibitor, is prepared for the first time via a simple water-based extraction method. FT-IR (Fourier transform infrared spectroscopy) and UV-Vis (UV-visible) indicate that ATL extract contains abundant heterocyclic organics with conjugated structures, which exhibit the potential to become a high-efficiency inhibitor. Notably, the active sites of ATL molecules and their interaction with Q235 steel at the molecular/atomic level are revealed via theoretical calculations. The highest Ebinding value observed for the major components in the ATL extract is 259.66 kcal/mol, implying a significant adsorption capacity. The electrochemical results verify that microdose ATL extract can prominently inhibit steel corrosion, and the highest inhibition efficiency (η) is 97.5% (1000 mg/L). Following immersion for 24 h, the η value is enhanced to 99.0%, indicating a reliable and long-term ATL extract protection film is formed on the steel surface in harsh acidic solutions. The results of the weight loss, SEM (scanning electron microscope), and LSCM (laser scanning confocal microscopy) are consistent with the above conclusions. Finally, this study anticipates providing theoretical support for developing novel green plant extract inhibitors and aiding in their application in industrial pickling environments.

Generation and Accumulation of Various Advanced Glycation End-Products in Cardiomyocytes May Induce Cardiovascular Disease

Cardiomyocyte dysfunction and cardiovascular diseases (CVDs) can be classified as ischemic or non-ischemic. We consider the induction of cardiac tissue dysfunction by intracellular advanced glycation end-products (AGEs) in cardiomyocytes as a novel type of non-ischemic CVD. Various types of AGEs can be generated from saccharides (glucose and fructose) and their intermediate/non-enzymatic reaction byproducts. Recently, certain types of AGEs (Nε-carboxymethyl-lycine [CML], 2-ammnonio-6-[4-(hydroxymetyl)-3-oxidopyridinium-1-yl]-hexanoate-lysine [4-hydroxymethyl-OP-lysine, hydroxymethyl-OP-lysine], and Nδ-(5-hydro-5-methyl-4-imidazolone-2-yl)-ornithine [MG-H1]) were identified and quantified in the ryanodine receptor 2 (RyR2) and F-actin-tropomyosin filament in the cardiomyocytes of mice or patients with diabetes and/or heart failure. Under these conditions, the excessive leakage of Ca2+ from glycated RyR2 and reduced contractile force from glycated F-actin-tropomyosin filaments induce cardiomyocyte dysfunction. CVDs are included in lifestyle-related diseases (LSRDs), which ancient people recognized and prevented using traditional medicines (e.g., Kampo medicines). Various natural compounds, such as quercetin, curcumin, and epigallocatechin-3-gallate, in these drugs can inhibit the generation of intracellular AGEs through mechanisms such as the carbonyl trap effect and glyoxalase 1 activation, potentially preventing CVDs caused by intracellular AGEs, such as CML, hydroxymethyl-OP, and MG-H1. These investigations showed that bioactive herbal extracts obtained from traditional medicine treatments may contain compounds that prevent CVDs.

A new study on the corrosion inhibition mechanism of green walnut husk extract as an agricultural waste for steel protection in HCl solution

In this study, green walnut husk (GWH) extract was explored as a cost-effective (waste-agricultural) and eco-friendly inhibitor to increase the corrosion resistance of carbon steel in a 1 M HCl solution. Electrochemical impedance spectroscopy, weight change, and potentiodynamic polarization (PDP) tests were utilized to examine the electrochemical behavior of steel substrates with and without the inhibitor. Atomic force microscopy (AFM), field emission scanning microscopy, Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) were performed to analyze corroded surface structures with and without the inhibitor. This inhibitor was found to be 27-82 % efficient in increasing the corrosion resistance of the steel substrates. When the temperature of the solution was increased from 303 to 323 K, the retardation coefficient decreased due to the physical adsorption of GWH molecules on the surface. The results indicated that GWH acted as a mixed inhibitor, and its adsorption on the surface followed the Langmuir model. AFM measurements showed that the roughness of corroded surfaces decreased by approximately 22 % when the GWH concentration was at its optimum level of 400 ppm. Thermodynamic studies displayed a decrease in the corrosion reaction's activation energy of about 25 %. FTIR and XRD patterns of corroded surfaces represented that hydrated iron chloride was the dominant corrosion product. Furthermore, the results provided insight into the GWH adsorption mechanism.

Synergistic effect of KI on the corrosion inhibition of a poly(diallylammonium chloride)-based cyclocopolymer containing bis-cationic motifs for mild steel corrosion in 20% formic acid

This study entails the syntheses of a homopolymer, poly(diallylammonium chloride) (3), and copolymers (8a-c) containing hydrophilic/hydrophobic pendants and their role in mitigating mild steel in aggressive 20% formic acid, a type of corrosion that is not frequently discussed in the literature. The synthesized homopolymer and copolymers were characterized by FTIR, NMR, viscometry, and TGA. Inhibitor 8b was found to be the most potent, with 81.8% inhibition efficiency (IE) registered via the potentiodynamic polarization method for 100 ppm of inhibitor concentration at 30 °C. Inhibitor 8b, mixed with 2 mmol KI, showed more than 90% IE for a meager 1 ppm inhibitor concentration. For a synergism of 50 ppm inhibitor and 2 mmol KI, the IE reached a high value of 99.1%. The synergism was so good that it helped the inhibitor retain ∼100% of its original IE even after a 24 h weight loss study at 60 °C. The adsorption isotherm study showed that 8b followed the Langmuir adsorption isotherm and adsorbed via chemisorption. A very high value (2.48 × 105 L mol-1) of the equilibrium adsorption constant (Kads) indicated strong adsorption. XPS and SEM surface studies provided evidence of the inhibitor found on the metal surface. Some toxicological parameters, such as LC50, bioaccumulation factor, and developmental toxicity, have been measured computationally. A brief mechanistic insight into how the inhibitors functioned has been offered along with the DFT study.

Green synthesis of cadmium oxide nanoparticles (CdO-NPS) using syzygium cumini: exploring industrial applications of CdO NPs as a corrosion inhibitor of mild steel in the acidic environment

Potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) and weight loss measurements were used to assess the effectiveness of CdO-NPs as a corrosion inhibitor for carbon steel in 0.5 M H2SO4. It was amply shown that as the concentration of CdO-NPs increased, the cathodic currents decreased and the active corroding sites were blocked completely. Moreover, a decrease in the mass of mild steel in an aggressive environment was reduced gradually with an increase in the concentration (ppm) of CdO-NPs inhibitor, resulting in an increase in the inhibition efficiency. The novel synthesized CdO-NPs were characterized by FT-IR, XRD and SEM-EDX spectroscopy.

Potential of the Novel Slot Blot Method with a PVDF Membrane for Protein Identification and Quantification in Kampo Medicines

Kampo is a Japanese traditional medicine modified from traditional Chinese medicine. Kampo medicines contain various traditional crude drugs with unknown compositions due to the presence of low-molecular-weight compounds and proteins. However, the proteins are generally rare and extracted with high-polarity solvents such as water, making their identification and quantification difficult. To develop methods for identifying and quantifying the proteins in Kampo medicines, in the current study we employ previous technology (e.g., column chromatography, electrophoresis, and membrane chromatography), focusing on membrane chromatography with a polyvinylidene difluoride (PVDF) membrane. Moreover, we consider slot blot analysis based on the principle of membrane chromatography, which is beneficial for analyzing the proteins in Kampo medicines as the volume of the samples is not limited. In this article, we assess a novel slot blot method developed in 2017 and using a PVDF membrane and special lysis buffer to quantify advanced glycation end products-modified proteins against other slot blots. We consider our slot blot analysis superior for identifying and quantifying proteins in Kampo medicines compared with other methods as the data obtained with our novel slot blot can be shown with both error bars and the statistically significant difference, and our operation step is simpler than those of other methods.

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

Q235 carbon steel is a commonly used engineering material, but its application in marine environments is limited by its susceptibility to corrosion, especially localized corrosion that can lead to material perforation. Effective inhibitors are crucial to addressing this issue, particularly in acidic environments where localized areas become increasingly acidic. This study reports the synthesis of a new imidazole derivative corrosion inhibitor and evaluates its effectiveness in corrosion inhibition performance using potentiodynamic polarization curve and electrochemical impedance spectroscopy techniques. High-resolution optical microscopy and scanning electron microscopy were employed for surface morphology analysis. Fourier-transform infrared spectroscopy was used to explore the protection mechanisms. The results demonstrate that the self-synthesized imidazole derivative corrosion inhibitor offers an excellent corrosion protection performance for Q235 carbon steel in a 3.5 wt. % NaCl acidic solution. This inhibitor can provide a new strategy for carbon steel corrosion protection.