Over-expansion capacity and stent design model: An update with contemporary DES platforms

Impact of lesion morphology on stent elongation during bifurcation PCI: an in vivo OCT study

BACKGROUND

Recent observations in silico and in vivo reported that, during proximal optimisation technique, drug-eluting stents (DES) elongate, challenging conventional wisdom. The interaction between plaque morphology and radial expansion is well established, but little is known about the impact of plaque morphology on elongation.

AIMS

We aimed to assess the longitudinal mechanical behaviour of contemporary DES in vivo and evaluate the relationship between post-percutaneous coronary intervention (PCI) stent elongation and lesion morphology, as assessed with optical coherence tomography (OCT).

METHODS

Patients treated with OCT-guided PCI to left main or left anterior descending artery bifurcations, between July 2017 and March 2022, from the King's Optical coherence Database Analysis Compendium were included. Patients were excluded if there were overlapping stents, if they had undergone prior PCI, or if there was inadequate image quality. Lesions were characterised as fibrocalcific, fibrous or lipid-rich by pre-PCI OCT. Following stent post-dilatation, stent expansion and final stent length were assessed. The primary outcome was the percentage change in stent length from baseline.

RESULTS

Of 501 eligible consecutive patients from this period, 116 were included. The median age was 66 years (interquartile range [IQR] 57-76), 31% were female, and 53.4% were treated for an acute coronary syndrome. A total of 50.0% of lesions were classified as fibrocalcific, 6.9% were fibrous, and 43.1% were lipid-rich. The change in relative stent length was 4.4% (IQR 1.0-8.9), with an increase of 3.1% (IQR 0.5-6.3) in fibrocalcific lesions, 3.3% (IQR 0.5-5.9) in fibrous lesions, and 6.4% (IQR 3.1-11.1) in lipid-rich plaque (p=0.006). In multivariate regression modelling, lipid-rich plaque was an independent predictor of stent elongation (odds ratio 3.689, 95% confidence interval: 1.604-8.484).

CONCLUSIONS

Contemporary DES elongate following implantation and post-dilatation, and this is significantly mediated by plaque morphology. This is an important consideration when planning a strategy for DES implantation.

Platinum chromium everolimus-eluting stents for the treatment of (complex) coronary artery disease; from SYNERGY™ to the MEGATRON™

INTRODUCTION

The introduction of drug-eluting coronary stents (DES) into clinical practice in 2002 represented a major milestone in the treatment of obstructive coronary artery disease. Over the years, significant advances in polymer coating and in antiproliferative agent technology have further improved the safety and clinical performance of newer-generation DES.

AREAS COVERED

Development of platinum chromium (PtCr) alloys with high radial strength and high radiopacity have enabled the design of new, thin-strut, flexible, and highly trackable stent platforms, while simultaneously improving stent visibility. These advances have facilitated complex percutaneous treatment of a diverse population of patients in clinical practice. This review will provide an overview of the evolution in PtCr everolimus-eluting stents from PROMUS Element™ to SYNERGY™ to the recently introduced SYNERGY MEGATRON™. The clinical data will be summarized and put into perspective, especially focusing on the role of the SYNERGY™ and MEGATRON™ platforms in the treatment of complex coronary artery disease and high-risk patients.

EXPERT OPINION

The SYNERGY™ stent demonstrates favorable clinical efficacy and safety outcome data, and whilst the clinical data on MEGATRON™ are sparse, early experience is promising. The specific overexpansion capabilities, visibility, and radial strength of the MEGATRON™ are attractive features for complex coronary interventions.

One-Month Dual Antiplatelet Therapy Followed by P2Y12 Inhibitor Monotherapy After Biodegradable Polymer Drug-Eluting Stent Implantation - The REIWA Region-Wide Registry

BACKGROUND

The safety and feasibility of using 1-month dual antiplatelet therapy (DAPT) followed by P2Y12inhibitor monotherapy for patients after percutaneous coronary intervention (PCI) with thin-strut biodegradable polymer drug-eluting stents (BP-DES) in daily clinical practice remain uncertain.

METHODS AND RESULTS

The REIWA region-wide registry is a prospective study conducted in 1 PCI center and 9 local hospitals in northern Japan. A total of 1,202 patients who successfully underwent final PCI using BP-DES (Synergy: n=400; Ultimaster: n=401; Orsiro: n=401), were enrolled in the registry, and received 1-month DAPT followed by P2Y12inhibitor (prasugrel 3.75 mg/day or clopidogrel 75 mg/day) monotherapy. The primary endpoint was a composite of cardiovascular and bleeding events at 12 months, including cardiovascular death, myocardial infarction (MI), definite stent thrombosis (ST), ischemic or hemorrhagic stroke, and Thrombolysis in Myocardial Infarction (TIMI) major or minor bleeding. Based on the results of a previous study, we set the performance goal at 5.0%. Over the 1-year follow-up, the primary endpoint occurred in 3.08% of patients, which was lower than the predefined performance goal (Pnon-inferiority<0.0001). Notably, definite ST occurred in only 1 patient (0.08%) within 1 year (at 258 days). No differences were observed in the primary endpoint between stent types.

CONCLUSIONS

The REIWA region-wide registry suggests that 1-month DAPT followed by P2Y12inhibitor monotherapy is safe and feasible for Japanese patients with BP-DES.

Evaluation of post-dilatation on longitudinal stent deformation and postprocedural stent malapposition in the left main artery by optical coherence tomography (OCT): an in vitro study

BACKGROUND

The diameter of the ostial and proximal left main coronary artery can be greater than 5.0 mm. However, the diameters of the mostly available coronary drug-eluting stents (DESs) are ≤ 4.0 mm. Whether high-pressure dilatation can increase the diameter of stents from 4.0 to 5.0 mm and whether post-dilatation leads to longitudinal stent deformation (LSD) of 4.0-mm-diameter stents have rarely been studied. Therefore, this study aims to evaluate LSD and stent malapposition of six types of commercially available 4.0-mm-diameter stents in China in a 5.0-mm-diameter artificial blood vessel model by optical coherence tomography (OCT) in vitro.

METHODS

The left main coronary artery was simulated by a truncated cone-shaped silicone tube. The internal diameters were 4.0 mm at one end of the silicone tube and 5.0 mm at the other end. Six different types of coronary stents widely used in China were selected for this study. Each stent was respectively implanted into the simulated blood vessel and dilated to a diameter of 4.2 mm according to the stent-balloon pressure compliance table. The stents were subjected to post-dilatation with a 5.0 × 15-mm noncompliant balloon. The LSD ratio of the longitudinal axis of each stent and stent malapposition were measured through OCT, and any fractures of the stents were determined.

RESULTS

None of the six types of stents fractured following post-dilatation. The longitudinal axes of the BuMA and Excrossal stents were slightly shortened, while the other stents were elongated after high-pressure post-dilatation. All stents expanded to a diameter of 5.0 mm without incomplete stent apposition, except for the Nano Plus stent, which remained malapposed after high-pressure post-dilatation.

CONCLUSION

All 4.0-mm-diameter stents can be expanded to a diameter of 5.0 mm by noncompliant balloon post-dilatation without stent strut fracture. Most stents were found to be well apposed after high-pressure post-dilatation. However, LSD was observed after post-balloon dilatation. Stent malapposition might be positively correlated with the percentage change in stent length.

Safety and efficacy results of percutaneous renal stent implantation in patients with acute coronary syndrome with ectatic and aneurysmatic coronary arteries

BACKGROUND

For the treatment of stenotic lesions developing in dilated coronary arteries, it is difficult to find an appropriately sized coronary stent given that the vessel diameter is too large. This poses a greater problem, especially in patients who require urgent intervention, such as acute coronary syndrome.

OBJECTIVE

We aimed to evaluate the efficacy and safety of renal stents implanted in ectatic/aneurysmatic coronary arteries in such patients.

METHODS

In total, 18 patients (renal stent group) who underwent renal stent implantation in ectatic/aneurysmatic coronary arteries requiring percutaneous coronary intervention (PCI) and 45 patients who underwent large-sized bare-metal coronary stent (BMCS) implantation (BMCS group) at our center were included in the study. The primary endpoints were MACE (myocardial infarction and cardiovascular mortality), and the secondary endpoints were restenosis and all-cause mortality.

RESULTS

In the study patients with a mean follow-up of 25.3 ± 14.6 months (1-48 months), the control coronary angiography duration was 24.6 ± 14.8 months for the renal stent group and 22.8 ± 15.7 months for the BMCS group (p = 0.06). The MACE was observed in 2 (11.1%) patients in the renal stent group and 4 (8.9%) patients in the BMCS group (HR: 1.39 (0.24-7.82), p = 0.70). The secondary composite outcome was identified in 4 (22.2%) patients in the renal stent group and 6 (13.7%) patients in the BMCS group (HR: 1.93 (0.53-6.91), p = 0.31). No significant differences in primary and secondary outcomes were noted between the groups.

CONCLUSION

Renal stents used during PCI in patients with acute coronary syndrome with ectatic/aneurysmatic coronary arteries have similar efficacy, and mid-term follow-up results those noted for BMCS. These findings support that renal stents can be used in ectatic and aneurysmatic coronary arteries when necessary.

CLINICAL TRIAL REGISTRATION

This study has been registered on ClinicalTrials.gov (NCT05410678).

Stent expansion in calcified coronary chronic total occlusions: The impact of different stent platforms

OBJECTIVES

To evaluate the stent expansion of the durable-polymer Zotarolimus-eluting stent (dp-ZES), the durable-polymer Everolimus-eluting stent (dp-EES), and the bioabsorbable-polymer Sirolimus-eluting stent (bp-SES) in calcified coronary chronic total occlusions (CTO).

BACKGROUND

The newer generation stents with ultrathin struts might raise concerns regarding reduced radial strength and higher stent recoil (SR) when implanted in calcified CTOs.

METHODS

Between January 2017 and June 2021 consecutive patients with CTO undergoing percutaneous coronary intervention with dp-ZES, dp-EES, or bp-SES were evaluated. The analysis was performed in calcific and in noncalcific CTOs. Quantitative coronary angiography analysis was used to assess diameter stenosis (DS), absolute and relative SR, absolute and relative focal SR, absolute and relative balloon deficit (BD), and absolute and relative focal BD. The primary endpoint was DS.

RESULTS

A total of 213 CTOs were evaluated, 115 calcific CTOs (dp-ZES:25, dp-EES:29, bp-SES:61) and 98 non-calcific CTOs (dp-ZES:41, dp-EES:11, bp-SES:46). In calcific CTOs, residual DS was lower in dp-ZES than in dp-EES and bp-SES (-1.00% [-6.50-6.50] vs. 13.00% [7.0-19.00] vs. 15.00% [5.00-20.00]; p < 0.001). Dp-ZES was also an independent predictor of residual DS ≤ 10% (OR 11.34, 95% CI 2.6-49.43, p = 0.001). Absolute and relative focal SR and absolute and relative SR were similar between dp-ZES, dp-EES, and bp-SES (p = 0.913, p = 0.890, p = 0.518, p = 0.426, respectively). In noncalcified CTOs, the residual DS was similar in the three groups (p = 0.340). High relative focal SR was less frequent in dp-ZES than in dp-EES and in bp-SES (19.5% vs. 54.5% vs. 37.0%; p < 0.048).

CONCLUSIONS

The three stent platforms demonstrated an overall low residual DS when implanted in CTOs. However, dp-ZES was associated with the lowest residual DS and identified as independent predictor of residual DS ≤ 10% in patients with calcific CTOs. Dp-ZES was associated with a lower incidence of high relative focal stent recoil, in noncalcific CTOs. Balloon deficit might be considerate as a surrogate for stent expansion in calcified CTOs.

A technology evaluation of the Onyx Frontier drug-eluting stent

INTRODUCTION

Onyx FrontierTM represents the latest iteration within the family of zotarolimus-eluting stents (ZES), designed for the treatment of coronary artery disease. Approval by the Food and Drug Administration was granted in May 2022, and Conformité Européenne marking followed in August 2022.

AREAS COVERED

We hereby review the principal design features of Onyx Frontier, highlighting differences and similarities with other currently available drug-eluting stents. In addition, we focus on the refinements of this newest platform as compared with previous ZES versions, including the attributes yielding its exceptional crossing profile and deliverability. The clinical implications related to both its newest and inherited characteristics will be discussed.

EXPERT OPINION

The nuances of the latest Onyx Frontier, together with the continuous refinement previously witnessed throughout the development of ZES, lead to a latest generation device ideal for a diverse spectrum of clinical and anatomical scenarios. In particular, its peculiarities will be of benefit in the settings often offered by a progressively aging population, such as high bleeding risk patients and complex coronary lesions.

Provisional Strategy for Left Main Stem Bifurcation Disease: A State-of-the-Art Review of Technique and Outcomes

Left main coronary artery (LMA) disease jeopardizes a large area of myocardium and increases the risk of major adverse cardiovascular events. LMCA disease is found in 5% to 7% of all diagnostic coronary angiographies, and more than 80% of the patients enrolled in recent large randomized controlled left main trials had distal left main bifurcation or trifurcation disease. Emerging clinical evidence from prospective all-comer registries and randomized trials has provided a solid basis for percutaneous coronary intervention as a treatment option in selected patients with unprotected LMCA disease; however, to date, no uniform recommendations as to optimal stenting strategy for LMCA bifurcation lesions exist. This review provides an overview of provisional stenting technique and escalation to 2-stent strategies in LMCA bifurcation lesions. Data from randomized controlled trials and registries are reviewed. Technical characteristics of optimal provisional LMCA stenting technique and angiographic and intravascular determinants of escalation are also summarized.

Drug-Eluting Stents: Technical and Clinical Progress

Drug-eluting stents (DES) demonstrated superior efficacy when compared to bare metal stents and plain-old balloon angioplasty and are nowadays used in almost all percutaneous revascularization procedures. The design of the stent platforms is constantly improving to maximize its efficacy and safety. Constant development of DES includes adoption of new materials used for scaffold production, new design types, improved overexpansion abilities, new polymers coating and, finally, improved antiproliferative agents. Especially nowadays, with the immense number of available DES platforms, it is crucial to understand how different aspects of stents impact the effect of their implantation, as subtle differences between various stent platforms could impact the most important issue-clinical outcomes. This review discusses the current status of coronary stents and the impact of stent material, strut design and coating techniques on cardiovascular outcomes.

A large, prospective, multicentre study of left main PCI using a latest-generation zotarolimus-eluting stent: the ROLEX study

BACKGROUND

Data on left main (LM) percutaneous coronary interventions (PCI) have mostly been obtained in studies using drug-eluting stent (DES) platforms without dedicated large-vessel devices and with limited expansion capability.

AIMS

Our study aimed to investigate the safety and efficacy of LM PCI with the latest-generation Resolute Onyx DES.

METHODS

ROLEX (Revascularization Of LEft main with resolute onyX) is a prospective, multicentre study (ClinicalTrials.gov: NCT03316833) enrolling patients with unprotected LM coronary artery disease and a SYNTAX score <33 undergoing PCI with the Resolute Onyx zotarolimus-eluting coronary stent, that includes dedicated extra-large vessel platforms. The primary endpoint (EP) was target lesion failure (TLF): a composite of cardiac death, target vessel myocardial infarction (TVMI) and ischaemia-driven target lesion revascularisation (ID-TLR), at 1 year. All events were adjudicated by an independent clinical event committee. An independent core lab analysed all procedural angiograms.

RESULTS

A total of 450 patients (mean age 71.8 years, SYNTAX score 24.5±7.2, acute coronary syndrome in 53%) were enrolled in 26 centres. Of these, 77% of subjects underwent PCI with a single-stent and 23% with a 2-stent technique (8% double kissing [DK] crush, 6% culotte, 9% T/T and small protrusion [TAP] stenting). Intravascular imaging guidance was used in 45% (42% intravascular ultrasound [IVUS], 3% optical coherence tomography [OCT]). At 1 year, the primary EP incidence was 5.1% (cardiac death 2.7%, TVMI 2.7%, ID-TLR 2.0%). The definite/probable stent thrombosis rate was 1.1%. In a prespecified adjusted subanalysis, the primary EP incidence was significantly lower in patients undergoing IVUS/OCT-guided versus angio-guided PCI (2.0 vs 7.6%; hazard ratio [HR] 0.28, 95% confidence interval [CI]: 0.13-0.58; p<0.001).

CONCLUSIONS

In this large, multicentre, prospective registry, LM PCI with the Resolute Onyx DES showed good safety and efficacy at 1 year, particularly when guided by intracoronary imaging.

Under-deployment of extra-large drug-eluting stent: an adapted provisional technique for selected patients with distal lesions in large left main

BACKGROUND

In provisional technique, main vessel (MV) drug-eluting stent (DES) diameter is usually selected according to distal MV to reduce carina shift. Proximal optimization technique (POT) is used to expand the DES in the proximal MV. Occasionally, the size discrepancy between left main (LM) and left anterior descending artery (LAD) may be huge and this may cause stent malapposition and poor vessel wall coverage in large-sized LM. Recently, some manufactures designed extra-large DES to treat large vessels.

METHODS

We developed an "adapted" provisional strategy based on under-deployment of extra-large DES in case of major size mismatch between LM and proximal LAD. Bench tests were realized in appropriately designed LM bifurcation model using an extra-large DES (Onyx XL, Medtronic, Santa Rosa, CA, USA). This technique was adopted when such "rare" anatomy was found in our clinical practice.

RESULTS

At bench test, Onyx XL 4.5 mm stent reaches 3.8 mm at 5-6 atmospheres, with favorable stent deformation achieved after POT, kissing balloon and re-POT. This technique was performed in 10 patients undergoing unprotected LM stenting with large LM and major mismatch toward LAD. Angiographic success was achieved in all cases and optical coherence tomography assessment was performed in 5 patients revealing optimal stent result. After a follow-up of 557 days (range: 90-1369 days), clinical course was uneventful in all treated patients.

CONCLUSIONS

Under-deployment of extra-large DES is a technical option that can be considered to optimize the provisional stenting technique in selected patients with major diameter mismatch between large-sized LM and LAD.

How to deal with vessel diameter mismatch in left main bifurcation stenting

Left main coronary artery percutaneous coronary intervention is particularly complex when stenting across the distal bifurcation is required in the presence of a diameter mismatch between the proximal main and distal branches. A suboptimal procedural result increases the risk of thrombosis and restenosis. Considering the paucity of data published on this topic, our objective was to provide technical solutions to deal with this complex anatomy. We described four cases showing the use of devices and techniques which allowed us to overcome a diameter discrepancy between adjacent coronary segments: (1) self-expanding nitinol stent; (2) stent platform with noteworthy expansion capacity; (3) the 'extended skirt' technique; (4) the 'trouser-leg' technique. In conclusion, the use of specific strategies and devices allows a safe and effective approach to be used to perform treatment that respects the coronary anatomy, and to optimize percutaneous coronary intervention results in complex scenarios.

Treatment of coronary bifurcation lesions, part I: implanting the first stent in the provisional pathway. The 16th expert consensus document of the European Bifurcation Club

Stepwise layered provisional stenting (PS) is the most commonly used strategy to treat coronary bifurcation lesions (CBL). The term 'stepwise layered' emphasises the versatility of this approach that allows the adjustment of the procedure plan according to the CBL complexity, starting with stent implantation in one branch and implantation of a second stent in the other branch only when required. A series of refinements have been implemented over the years to facilitate the achievement of predictable procedural results using this approach. However, despite its simplicity and versatility, operators using this technique require full knowledge of the pitfalls of each procedural step. Part I of this 16^th European Bifurcation Club consensus paper provides a detailed step-by-step overview of the pitfalls and technical troubleshooting during the implantation of the first stent using the PS strategy for the treatment of CBL.

Safety and efficacy of 48 mm Xience Xpedition everolimus-eluting stent for the treatment of long coronary lesions

INTRODUCTION

Long drug-eluting stents may limit the issue of overlapping multiple stents when treating long coronary lesions.

AIM

The aim of the study was to assess the safety and efficacy of the 48 mm Xience Xpedition everolimus-eluting stent (48mm-EES) for the treatment of long coronary lesions, in an all-comer population.

METHODS

Patients receiving at least one 48mm-EES were prospectively included from March 2014 to December 2018. The primary endpoint was target lesion failure (TLF), defined as a composite of cardiac death, target vessel myocardial infarction, and clinically driven target lesion revascularization (TLR) at 1 year. The main secondary endpoint was the patient-oriented composite endpoint (POCE) defined as a composite of death, stroke, myocardial infarction, and reintervention.

RESULTS

A total of 268 patients with 276 long coronary lesions, including 94 chronic total occlusions (CTO), were successfully treated using at least one 48mm-EES. The total stent length per lesion was 66 ± 22 mm. A single 48mm-EES was suitable to successfully treat the target lesion in 48% of cases (60% for non-CTO lesions). One-year follow-up rate was 96.3%. TLF occurred in 13 patients (5.3%), mainly driven by TLR (4.1%). Two cardiac death occurred (0.7%). POCE occurred in 30 patients (11.6%) mainly driven by repeat revascularization (9.7%). Definite stent thrombosis was observed in two patients (0.7%). No difference was observed in one-year outcomes between single 48mm-EES and multiple stents implantation as well as between CTO and non-CTO lesions.

CONCLUSION

The 48mm-EES is safe and effective to treat long coronary lesions, including CTOs, and provides attractive cost-effectiveness by limiting multiple stenting.

Bench test and in vivo evaluation of longitudinal stent deformation during proximal optimisation

BACKGROUND

While radial stent deformation has been thoroughly investigated, data on longitudinal deformation are scarce.

AIMS

The aim of the study was to describe longitudinal stent deformation associated with the proximal optimisation technique (POT).

METHODS

Longitudinal stent deformation was assessed by bench testing and by clinical evaluation. Bench testing was performed in silicone models using 3.00 (n=15) and 3.50 mm (n=14) stent platforms. After deployment, stents were sequentially post-dilated in the proximal main branch up to 5.50 mm, in increments of 0.50 mm, in order to simulate a spectrum of overexpansion. Stent length was redefined by optical coherence tomography (OCT) after each step. Clinical data were collected retrospectively from OCT-guided bifurcation percutaneous coronary intervention cases.

RESULTS

In bench tests, POT has led to significant stent elongation in all cases. The magnitude of elongation was comparable between the 3.00 and the 3.50 mm stent platforms, with 0.86±0.74 mm vs 0.86±0.73 mm, respectively (p=0.71), per 0.5 mm overexpansion. For 3.00 mm stent platforms, maximal elongation was 4.31±1.47 mm after up to 5.5 mm overexpansion. For 3.50 mm platforms, maximal elongation was 2.87±0.94 mm after up to 5.5 mm overexpansion. Thirty-six clinical cases were analysed, of which 22 (61%) were performed in the distal left main. Post-dilation was performed with 0.98±0.36 mm absolute overexpansion, resulting in 2.22±1.35 mm elongation, as compared to nominal stent length.

CONCLUSIONS

Overexpansion by POT results in proximal stent elongation. This has to be considered once the stent length is selected and the stent is positioned, especially in the left main stem, where proximal overexpansion is marked and accurate ostial landing is critical.

Bioabsorbable polymer drug-eluting stents with 4-month dual antiplatelet therapy versus durable polymer drug-eluting stents with 12-month dual antiplatelet therapy in patients with left main coronary artery disease: the IDEAL-LM randomised trial

BACKGROUND

Improvements in drug-eluting stent design have led to a reduced frequency of repeat revascularisation and new biodegradable polymer coatings may allow a shorter duration of dual antiplatelet therapy (DAPT) after percutaneous coronary intervention (PCI).

AIMS

The Improved Drug-Eluting stent for All-comers Left Main (IDEAL-LM) study aims to investigate long-term clinical outcomes after implantation of a biodegradable polymer platinum-chromium everolimus-eluting stent (BP-PtCr-EES) followed by 4 months DAPT compared to a durable polymer cobalt-chromium everolimus-eluting stent (DP-CoCr-EES) followed by 12 months DAPT in patients undergoing PCI of unprotected left main coronary artery (LMCA) disease.

METHODS

This is a multicentre randomised clinical trial study in patients with an indication for coronary artery revascularisation who have been accepted for PCI for LMCA disease after Heart Team consultation. Patients were randomly assigned in a 1:1 ratio to receive either the BP-PtCr-EES or the DP-CoCr-EES. The primary endpoint was a non-inferiority comparison of the rate of major adverse cardiovascular events (MACE), defined as all-cause death, myocardial infarction, or ischaemia-driven target vessel revascularisation at 2 years.

RESULTS

Between December 2014 and October 2016, 818 patients (410 BP-PtCr-EES and 408 DP-CoCr-EES) were enrolled at 29 centres in Europe. At 2 years, the primary endpoint of MACE occurred in 59 patients (14.6%) in the BP-PtCr-EES group and 45 patients (11.4%) in the DP-CoCr-EES group; 1-sided upper 95% confidence interval (CI) 7.18%; p=0.04 for non-inferiority; p=0.17 for superiority. The secondary endpoint event of BARC 3 or 5 bleeding occurred in 11 patients (2.7%) in the BP-PtCr-EES group and 2 patients (0.5%) in the DP-CoCr-EES group (p=0.02).

CONCLUSIONS

In patients undergoing PCI of LMCA disease, after two years of follow-up, the use of a BP-PtCr-EES with 4 months of DAPT was non-inferior to a DP-CoCr-EES with 12 months of DAPT with respect to the composite endpoint of all-cause death, myocardial infarction or ischaemia-driven target vessel revascularisation.

Fundamentals of percutaneous coronary bifurcation interventions

Coronary bifurcation lesions (CBLs) account for 15%-20% of all percutaneous coronary interventions. The complex nature of these lesions is responsible for poorer procedural, early and late outcomes. This complex lesion subset has received great attention in the interventional cardiac community, and multiple stenting techniques have been developed. Of these, the provisional stenting technique is most often the default strategy; however, the elective double stenting (EDS) technique is preferred in certain subsets of complex CBLs. The double kissing crush technique may be the preferred EDS technique because of its efficacy and safety in comparative trials; however, this technique consists of many steps and requires training. Many new methods have recently been added to the EDS techniques to provide better stent scaffolding and to reduce early and late adverse outcomes. Intravascular imaging is necessary to determine the interventional strategy and postinterventional results. This review discusses the basic concepts, contemporary percutaneous interventional technical approaches, new methods, and controversial treatment issues of CBLs.

First Report of 3-Year Clinical Outcome After Treatment With Novel Resolute Onyx Stents in the Randomized BIONYX Trial

BACKGROUND

At 1 year, the international randomized BIONYX trial (ClinicalTrials.gov:NCT02508714) established non-inferiority regarding safety and efficacy of the novel Resolute Onyx zotarolimus-eluting stent (RO-ZES) vs. the Orsiro sirolimus-eluting stent (O-SES). Although the RO-ZES is used in daily practice, no clinical results have been published beyond 2 years.

METHODS AND RESULTS

We assessed 3-year clinical outcomes of 2,488 all-comers after percutaneous coronary intervention (PCI) with RO-ZES vs. O-SES. The main endpoint was target vessel failure (TVF), a composite of cardiac death, target vessel myocardial infarction (MI), or target vessel revascularization. Time-to-endpoints was assessed by Kaplan-Meier methods and between-group comparisons by log-rank tests. Follow-up was available in 2,433/2,488 (97.8%) patients. There was no significant between-stent difference in TVF (RO-ZES 112/1,243 [9.2%] vs. O-SES 109/1,245 [8.9%], hazard ratio [HR]: 1.03, 95% confidence interval [CI] 0.79-1.34; Plog-rank=0.85) and its individual components. The all-cause mortality was significantly lower after PCI with RO-ZES (3.7% vs.5.4%, HR: 0.67, 95% CI 0.46-0.97; Plog-rank=0.034), but cardiac mortality did not differ significantly (1.1% vs.1.9%, HR: 0.56, 95% CI 0.28-1.11; Plog-rank=0.09). Definite-or-probable stent thrombosis rates were low for both groups (0.6% vs.1.2%, HR: 0.46, 95% CI 0.19-1.14; Plog-rank=0.09).

CONCLUSIONS

This first 3-year randomized assessment of the RO-ZES showed a favorable rate of TVF that matched the outcomes of patients treated with O-SES. We observed a lower rate of all-cause death in the RO-ZES group, but long-term clinical follow-up is of interest.

Side-branch expansion capacity of contemporary DES platforms

Background

Percutaneous coronary interventions (PCI) of bifurcation stenoses are both complex and challenging. Stenting strategies share that the stents’ side cells must be carefully explored and appropriately prepared using balloons or stents. So far, stent manufacturers have not provided any information regarding side-branch expansion capacity of their stent platforms.

Aims

Given that drug-eluting stent (DES) information regarding their mechanical capacity of side-branch expansion is not available, we aimed to evaluate contemporary DES (Orsiro, BIOTRONIK AG; Xience Sierra, Abbott Vascular; Resolute Integrity, Medtronic; Promus Premier Select, Boston Scientific; Supraflex Cruz, Sahajan and Medical Technologies) by their side-branch expansion behavior using in vitro bench testing.

Methods

In this in vitro study, we analyzed five commercially available DES (diameter 3.0 mm), measuring their side-branch expansion following inflation of different high-pressure non-compliant (NC) balloons (balloon diameter: 2.00–4.00 mm), thereby revealing the morphological characteristics of their side-branch expansion capacities.

Results

We demonstrated that all tested contemporary DES platforms could withstand large single-cell deformations, up to 4.0 mm. As seen in our side-branch experiments, DES designs consisting of only two connectors between strut rings did not only result in huge cell areas, but also in larger cell diameters following side-branch expansion compared with DES designs using three or more connectors. Furthermore, the stent cell diameter attained was below the balloon diameter at normal pressure.

Conclusions

We recommend that the expansion capacity of side-branches should be considered in stent selection for bifurcation interventions.

Comparison of visibility of in-stent restenosis between conventional- and ultra-high spatial resolution computed tomography: coronary arterial phantom study

PURPOSE

The purposes of this experimental study were to compare the quantitative and qualitative visibility of in-stent restenosis between conventional-resolution CT (CRCT) and ultra-high-resolution CT (U-HRCT) and to investigate the effects of the image reconstruction techniques on the visualization of in-stent restenosis.

MATERIALS AND METHODS

A vessel tube with non-calcified plaque in a 3.0-mm stent was scanned by using CRCT and U-HRCT at 4 stent directions (0, 30, 60, and 90 degrees) to the through-plane direction. Hybrid iterative reconstruction (HIR); model-based iterative reconstruction (MBIR); deep-learning-based reconstruction (DLR) were used as reconstruction methods. The lumen size was assessed using the full width at half maximum method, and image quality was visually evaluated using 4-point scale.

RESULTS

U-HRCT had the significantly wider lumen sizes and narrower stent strut thickness than CRCT in three types of the reconstruction methods (P < 0.01). The lumen sizes for U-HRCT with 90 degrees were narrower than those with the other angle directions regardless of the reconstruction methods. Visual score was significantly higher for U-HRCT than CRCT (3.2 ± 0.7 vs 2.0 ± 0.4, P < 0.001).

CONCLUSIONS

U-HRCT quantitatively and qualitatively provided better visualization of in-stent restenosis compared to CRCT. Image quality of U-HRCT may be affected by stent angle.

Expansion Capacity of Drug-Eluting Stents in Patients with Left Main Coronary Artery Disease: An Intravascular Ultrasound Guided Study

Aims: The aim of this study was to assess the expansion capacity ofcurrent commercially available Drug Eluting Stents (DES) with nominaldiameters of 3.5-4.0mm in patients with Left Main disease.Materials and Methods: This study was conducted on 50Patients who underwent percutaneous coronary intervention(PCI)for Left Main disease at Benha university hospitals and NationalHeart Institute. PCI was done with Drug Eluting Stents(DES) with large diameters of 3.5-4mm and post dilatation wasdone with non-compliant (NC) balloons with diameters of 4.5-5mm. Intravascular ultrasound (IVUS) was used to measuremaximal stent diameter and area.Results: Three commercially available DESs were used in ourstudy; XIENCE Xpeditionᵀᴹ, Ultimasterᵀᴹ and Onyxᵀᴹ. Maximal stentdiameter was 4.5±0.3mm and diameter expansion index was0.96±0.05. Maximal stent area was 14.67±2.06mm² and area expansionindex was 0.86±0.07mm². On IVUS images, significantlymore calcification< 90 ̊ was detected in the group with expansionindex ˂ 0.85 (68.4 percent versus 25.8%, P=0.003) comparedto the group with expansion index >0.85. We found that DESswith diameters of 3.5-4.0mm can be expanded up to diameter of5.3mm after post-dilation. No complications were reported in thestudied patients, including perforation or stent fracture.Conclusion: Current DESs with nominal diameters of 3.5-4.0mmcan be safely and effectively over-expanded to reach the predicteddiameters in the left main, but the presence of calcification>90 may affect the achievement of the predicted area.

Impact of the metal-to-artery ratio on clinical outcomes in left main and nonleft main bifurcation: insights the RAIN-CARDIOGROUP VII study (veRy thin stents for patients with left mAIn or bifurcatioN in real life)

INTRODUCTION

The impact on clinical outcomes of the metal coverage on the coronary surface (namely the metal-to-artery ratio) of currently used drug-eluting stents (DESs) has not been defined.

METHODS

All patients with a left main or bifurcation stenosis treated with percutaneous coronary intervention (PCI) using ultrathin stents (struts thinner than 81 μm) were enrolled with a prospective multicentre fashion. The rate of device-oriented endpoint [DOE, defined as a composite of target lesion revascularization (TLR) and stent thrombosis] was the primary endpoint, while its single components were the secondary ones, evaluated according to the metal-to-artery ratio.

RESULTS

After 14 ± 10.4 months 62 (7.5%) of 830 patients undergoing PCI on left main experienced a DOE without differences in the metal-to-artery ratio (14.5 ± 2.1 vs. 14.4 ± 1.9, P = 0.51). Fifty out (2.4%) of 2082 patients treated with PCI on a coronary bifurcation other than left main experienced a DOE, with a higher mean metal-to-artery ratio (15.3 ± 2.1 vs. 14.6 ± 2, P = 0.01). At multivariate analysis, together with hypertension and diabetes, the metal-to-artery ratio was an independent predictor of DOE (hazard ratio 1.7 : 1.02-1.34, P = 0.02) in nonleft main PCI. When analysed for diameter, we found a significant correlation with DOE when the stent diameter was inferior to 3.0 mm (hazard ratio 1.21: 1.06-1.38, P < 0.01, all 95% confidence interval); this result was mainly consistent for patients treated with provisional stenting. The metal-to-artery ratio does not impact on outcomes in left main PCI, both in the provisional or two-stent technique, and generally when a drug-eluting stent more than 3.5 mm in diameter is implanted. Regarding nonleft main PCI, it is independently related to DOE and TLR, especially for DES with a diameter of 3.25 mm or less.

CONCLUSION

The metal-to-artery ratio does not impact on outcomes in left main PCI, both in the provisional or two-stent technique, and generally when a drug-eluting stent more than 3.5 mm in diameter is implanted. Regarding nonleft main PCI, it is independently related to DOE and TLR, especially for DES with a diameter of 3.25 mm or less.

Elastic stent recoil in coronary total occlusions: Comparison of durable-polymer zotarolimus eluting stent and ultrathin strut bioabsorbable-polymer sirolimus eluting stent

Objectives

To compare stent recoil (SR) of the thin‐strut durable‐polymer Zotarolimus‐eluting stent (dp‐ZES) and the ultrathin‐strut bioabsorbable‐polymer Sirolimus‐eluting stent (bp‐SES) in chronic total occlusions (CTOs) and to investigate the predictors of high SR in CTOs.

Background

Newer ultrathin drug eluting stent might be associated with lower radial force and higher elastic recoil due to the thinner strut design, possibly impacting on the rate of in‐stent restenosis and thrombosis.

Methods

Between January 2017 and November 2019, consecutive patients with CTOs undergoing percutaneous coronary intervention were evaluated. Only patients treated with dp‐ZES or bp‐SES were included and stratified accordingly. Quantitative coronary angiography analysis was used to assess absolute SR, relative SR, absolute focal SR, relative focal SR, high absolute, and high relative focal SR.

Results

A total of 128 lesions (67 treated with dp‐ZES and 61 with bp‐SES) in 123 patients were analyzed. Between bp‐SES and dp‐ZES no differences were found in absolute SR (p = .188), relative SR (p = .138), absolute focal SR (p = .069), and relative focal SR (p = .064). High absolute and high relative focal SR occurred more frequently in bp‐SES than in dp‐ZES (p = .004 and p = .015). Bp‐SES was a predictor of high absolute focal SR (Odds ratio [OR] 3.29, 95% confidence interval [CI] 1.50–7.22, p = .003]. High‐pressure postdilation and bp‐SES were predictors of high relative focal SR (OR 2.22, 95% CI 1.01–4.86, p = .047; OR 2.74, 95% CI 1.24–6.02, p = .012, respectively).

Conclusions

Both stents showed an overall low SR. However, ultra‐thin strut bp‐SES was a predictor of high absolute and high relative focal SR.

Factors Influencing Stent Failure in Chronic Total Occlusion Coronary Intervention

Stent failure remains one of the greatest challenges for interventional cardiologists. Despite the evolution to superior second- and third-generation drug-eluting stent designs, increasing use of intracoronary imaging and the adoption of more potent antiplatelet regimens, registries continue to demonstrate a prevalence of stent failure or target lesion revascularisation of 15-20%. Predisposition to stent failure is consistent across both chronic total occlusion (CTO) and non-CTO populations and includes patient-, lesion- and procedure-related factors. However, histological and pathophysiological properties specific to CTOs, alongside complex strategies to treat these lesions, may potentially render percutaneous coronary interventions in this cohort more vulnerable to failure. Prevention requires recognition and mitigation of the precipitants of stent failure, optimisation of interventional techniques, including image-guided precision percutaneous coronary intervention, and aggressive modification of a patient's cardiovascular risk factors. Management of stent failure in the CTO population is technically challenging and itself begets recurrence. We aim to provide a comprehensive review of factors influencing stent failure in the CTO population and strategies to attenuate these.

The optimal structural analysis of cobalt-chromium alloy (L-605) coronary stents

A coronary stent is a conventional medical device used in percutaneous coronary intervention (PCI), and its mechanical properties have become one of the critical factors to determine the effect of surgical treatment. Based on the existing cobalt-chromium (CO-Cr) alloy L605 coronary stent, this paper established an integrated finite element model of the stent-balloon-compression shell to simulate the stent bundle expansion test and crush resistance test with parallel plates. We verified the accuracy of the analytical model by comparing the simulation results with experimental results. The effects of different parameters on the axial retraction performance, the expansion uniformity, and the flexibility of the stent are analyzed by using the support body dimension and connector form as parameters. The results demonstrate that increasing the number and length of the circumferential support can improve the axial retraction performance, expansion uniformity, and the form of the connector has a significant influence on the flexibility of the stent. Finally, the optimized CO-Cr alloy stent with improved comprehensive indicators is described.

Contemporary approaches to bifurcation stenting

Bifurcation lesions are common and associated with higher risks of major cardiac events and restenosis after percutaneous coronary intervention (PCI). Treatment requires understanding of lesion characteristics, stent design and therapeutic options. We review the evidence for provisional vs 2-stent techniques. We conclude that provisional stenting is suitable for most bifurcation lesions. We detail situations where a 2-stent technique should be considered and the steps for performing each of the 2-step techniques. We review the importance of lesion preparation, intracoronary imaging, proximal optimization (POT) and kissing balloon inflation.

Comparison of overexpansion capabilities and thrombogenicity at the side branch ostia after implantation of four different drug eluting stents

Interventions in bifurcation lesions often requires aggressive overexpansion of stent diameter in the setting of long tapering vessel segment. Overhanging struts in front of the side branch (SB) ostium are thought to act as a focal point for thrombi formation and consequently possible stent thrombosis. This study aimed to evaluate the overexpansion capabilities and thrombogenicity at the SB ostia after implantation of four latest generation drug-eluting stents (DES) in an in-vitro bifurcation model. Four clinically available modern DES were utilized: one bifurcation dedicated DES (Bioss LIM C) and three conventional DES (Ultimaster, Xience Sierra, Biomime). All devices were implanted in bifurcation models with proximal optimization ensuring expansion before perfusing with porcine blood. Optical coherence tomography (OCT), immunofluorescence (IF) and scanning electron microscope analysis were done to determine thrombogenicity and polymer coating integrity at the over-expanded part of the stents. Computational fluid dynamics (CFD) was performed to study the flow disruption. OCT (p = 0.113) and IF analysis (p = 0.007) demonstrated lowest thrombus area at SB ostia in bifurcation dedicated DES with favorable biomechanical properties compared to conventional DES. The bifurcated DES also resulted in reduced area of high shear rate and maximum shear rate in the CFD analysis. This study demonstrated numerical differences in terms of mechanical properties and acute thrombogenicity at SB ostia between tested devices.

The Ultimaster coronary stent system: 5-year worldwide experience

Newer generation drug-eluting stents have significantly improved outcomes in patients undergoing percutaneous coronary intervention by reducing the risk of restenosis and stent thrombosis. In comparison with first-generation ones, contemporary drug-eluting stents have thinner struts and more biocompatible polymers, which reduce inflammation, promote endothelialization and decrease neointimal proliferation. The Ultimaster™/Ultimaster™ Tansei™ coronary stent system is a cobalt–chromium, biodegradable polymer, sirolimus-eluting stent (Terumo, Tokyo, Japan) that received the Conformitè Européenne mark approval for clinical use in 2014/2018. This device has been the object of intense clinical evaluation in controlled randomized studies and observational registries. In this article, we analytically reviewed the available clinical data with a focus on the latest real-world evidence that demonstrates excellent performance in all of the clinical subsets.

Device profile of the Resolute Onyx Zotarolimus eluting coronary stent system for the treatment of coronary artery disease: overview of its safety and efficacy

Introduction: The increasing complexity of patients undergoing percutaneous coronary intervention (PCI) regarding both coronary anatomy and comorbidities requires dedicated devices. The Resolute Onyx (R-Onyx, Medtronic, CA, USA) stent is a novel durable polymer zotarolimus-eluting stent (ZES) promising better deliverability, increased radiopacity and lower thrombogenicity.Areas covered: In this review, we discuss device features, preclinical evidence, and clinical studies including patients treated with R-Onyx. The BIONYX and Onyx ONE studies were two major landmark trials demonstrating non-inferiority of R-Onyx as compared to other latest generation devices. We also elaborate on alternative innovations in drug-eluting stent (DES) technology and how R-Onyx fits into this field.Expert opinion: R-Onyx is designed to address the challenges of contemporary PCI, but evidence on its clinical performance is largely derived from studies on older generation devices from the ZES family. Nonetheless, all clinical studies on R-Onyx consistently show excellent outcomes, with particularly low rates of stent thrombosis, making it a promising candidate for short dual antiplatelet regimens. In addition, R-Onyx is available with a wide range of stent diameters allowing accurate sizing for both very small and very large coronary vessels.

Left main coronary artery disease: when and how to perform PCI?

Left main coronary artery (LMCA) disease has been reported in up to 10% of all patients with coronary artery disease (CAD) and in the majority of cases are associated with severe three-vessel CAD. Among patients with chronic coronary syndrome revascularization of significant LMCA disease improves prognosis, while there is a debate about which revascularization strategy, CABG surgery or percutaneous coronary interventions to use. We do a review of the available evidence about the impact of LMCA lesions on patient prognosis according to CAD extension and clinical presentation, the outcome after percutaneous or surgical revascularization, the procedural challenges of LMCA PCI and the available armamentarium to optimally treat this relevant population.

Dutch multicenter experience using the STENTYS Xposition S self-apposing stent in complex coronary lesions

OBJECTIVES

The aim is to assess the experience in the Netherlands using the Xposition S self-apposing stent in complex coronary lesions in clinical practice.

BACKGROUND

Treatment of complex coronary lesions could be accompanied with stent sizing difficulties and complications, particularly due to vessel overdilation or stent underexpansion. The self-apposing feature of the Xposition S stent (STENTYS, Paris, France) supports good strut apposition in complex anatomies and allows for an increase in diameter after implantation.

METHODS

In this real-world registry, data from patients treated with Xposition S in four Dutch clinical sites were prospectively collected and analyzed. Any patient suitable for implantation with Xposition S according to current recommendations was enrolled. Primary endpoint was major adverse cardiac events (MACE) at 1 year.

RESULTS

Between 2015 and 2018, data from 251 patients were collected. Clinical presentation was an acute coronary syndrome in majority of the patients (76.9%). Main angiographic indications were lesions in aneurysmatic or ectatic vessels (32.3%), thrombus containing lesions (13.1%), and bifurcation/left main stenosis (10.4%). Most of the target lesions (TLs) were classified as AHA/ACC Type C (53.6%). Despite lesion complexity, device was successfully implanted at TL in 96.8%. MACE rate, reported on patients having completed 1-year follow-up (n = 203), was 6.6%, with low rate of definite/probable stent thrombosis (1.0%).

CONCLUSIONS

In clinical practice of several Dutch sites, STENTYS Xposition S showed good procedural results and low 1-year clinical events rate, despite complex coronary anatomy.

Acquired Pulmonary Vein Stenosis After Radiofrequency Ablation for Atrial Fibrillation: Single-Center Experience in Catheter Interventional Treatment

OBJECTIVES

The aim of the present study was to analyze and report a single-center experience with catheter interventional treatment of radiofrequency-induced pulmonary vein stenosis (PVS) following atrial fibrillation (AF) ablation.

BACKGROUND

Catheter interventional treatment of radiofrequency-induced PVS following AF ablation remains a challenging field because of a lack of randomized data and treatment guidelines.

METHODS

All patients at a single center who underwent catheter interventional treatment for radiofrequency-induced PVS were retrospectively assessed.

RESULTS

From January 2004 to September 2017, the total rate of PVS following interventional AF ablation was 0.78% (87 of 11,103). Thirty-nine patients with PVS were treated with 84 catheter interventions: 68 (81%) with percutaneous transluminal balloon angioplasty (PTA) and 16 (19%) with stent implantation. The distribution of stent type was 3 drug-eluting stents (19%) and 13 bare-metal stents (81%). The overall restenosis rate was 53% after PTA versus 19% after stent implantation (p = 0.007) after a median follow-up period of 6 months (interquartile range: 3 to 55 months). The total complication rate for PTA was 10% versus 13% for stenting (p = NS).

CONCLUSIONS

This study demonstrates significantly better outcomes in terms of restenosis after stent implantation versus PTA only, with comparable complication rates for these 2 options of interventional treatment of radiofrequency-induced PVS. In summary, despite the lack of randomized studies, the present data and currently available published studies seem to favor stent implantation as a first-line therapy in patients with radiofrequency-induced severe PVS.

Sirolimus-eluting BiOSS LIM dedicated bifurcation stent in the treatment of unprotected distal left main stenosis

BACKGROUND

Proximal optimization technique (POT) has been proposed to adapt the conventional drug-eluting stent (DES) with the fractal anatomy of the bifurcation. However, only few DES are labeled for post-expansion beyond 5.0 mm. Furthermore, recrossing in the side branch (SB) through the main vessel (MV) stent cells may be challenging.

OBJECTIVES

To compare the sirolimus-eluting, balloon-expandable dedicated bifurcation stent BiOSS LIM DES versus the second generation DES in the treatment of distal unprotected left main coronary arteries (ULMCAs) lesions.

METHODS

Forty-two consecutive patients with distal ULMCA lesions were treated with the BiOSS LIM (BiOSS LIM group) in our center. A matched-group of patients treated with second-generation DES was selected from our database (Control group). The primary endpoint was the procedural complication rate, including (a) SB occlusion, defined as intraprocedural TIMI flow grade <3 immediately after MV stenting; and/or (b) trouble in SB access, defined as the need of ≥2 guidewires or a failure to recross in the SB trough the MV stent cells. The need of POT in the two groups was also analyzed.

RESULTS

The primary endpoint occurred in four (9.5%) patients in the BiOSS LIM group and in 13 (31%) in the Control group (p = 0.028; OR = 4.25; 95% confidence interval: 1.25-14.43). POT was performed more often in the Control group (71% vs. 35%; p = 0.004).

CONCLUSIONS

Compared to conventional DES, the BiOSS LIM stent (1) facilitates SB recrossing and (2) fits well with the fractal anatomy of the left main bifurcation.

Technical Approaches to Left Main Coronary Intervention: Contemporary Best Practices

Left main percutaneous coronary intervention is an acceptable alternative to coronary artery bypass grafting, and in experienced hands, excellent procedural results can be obtained. A systematic approach to stenting and meticulous attention to detail are required. For most lesions, a single-stent provisional approach is sufficient, but for the more complex lesion, a 2-stent technique is required. Herein, the optimal approach to left main lesion assessment and percutaneous intervention is described.

Larger Sizes Matter More! Applying the Matteo Mathematics Method for Endovascular Aortic Bifurcation Reconstruction to Large Venous Vascular Repair

Endovascular aortobifemoral bypass repair with aortic bifurcation reconstruction is a well-established option with mortality benefits compared to conventional surgical management. The same theory, formulas, and techniques can be applied to the central venous system as long as there are commercially available devices. Using mathematically derived criteria for optimal stent size selection, endovascular aortic bifurcation reconstruction with kissing stents was extrapolated to the inferior vena cava (IVC). This report describes a traumatic case of IVC injury that was successfully repaired using the standard aortic grafts while adhering to the guidelines for proper stent size selection.

Thin composite wire strut, durable polymer-coated (Resolute Onyx) versus ultrathin cobalt-chromium strut, bioresorbable polymer-coated (Orsiro) drug-eluting stents in allcomers with coronary artery disease (BIONYX): an international, single-blind, randomised non-inferiority trial

BACKGROUND

During the past decade, many patients had zotarolimus-eluting stents implanted, which had circular shape cobalt-chromium struts with limited radiographic visibility. The Resolute Onyx stent was developed to improve visibility while reducing strut thickness, which was achieved by using a novel composite wire with a dense platinum-iridium core and an outer cobalt-chromium layer. We did the first randomised clinical trial to assess the safety and efficacy of this often-used stent compared with the Orsiro stent, which consists of ultrathin cobalt-chromium struts.

METHODS

We did an investigator-initiated, assessor-blinded and patient-blinded, randomised non-inferiority trial in an allcomers population at seven independently monitored centres in Belgium, Israel, and the Netherlands. Eligible participants were aged 18 years or older and required percutaneous coronary intervention with drug-eluting stents. After guide wire passage with or without predilation, members of the catheterisation laboratory team used web-based computer-generated allocation sequences to randomly assign patients (1:1) to either the Resolute Onyx or the Orsiro stent. Randomisation was stratified by sex and diabetes status. Patients and assessors were masked to allocated stents, but treating clinicians were not. The primary endpoint was target vessel failure at 1 year, a composite of cardiac death, target-vessel-related myocardial infarction, and target vessel revascularisation, and was assessed by intention to treat (non-inferiority margin 2·5%) on the basis of outcomes adjudicated by an independent event committee. This trial is registered with ClinicalTrials.gov, number NCT02508714.

FINDINGS

Between Oct 7, 2015, and Dec 23, 2016, 2516 patients were enrolled, 2488 of whom were included in the intention-to-treat analysis (28 withdrawals or screening failures). 1243 participants were assigned to the Resolute Onyx group, and 1245 to the Orsiro group. Overall, 1765 (70·9%) participants presented with acute coronary syndromes and 1275 (51·2%) had myocardial infarctions. 1-year follow-up was available for 2478 (99·6%) patients. The primary endpoint was met by 55 (4·5%) patients in the Resolute Onyx group and 58 (4·7%) in the Orsiro group. Non-inferiority of Resolute Onyx to Orsiro was thus established (absolute risk difference -0·2% [95% CI -1·9 to 1·4]; upper limit of the one-sided 95% CI 1·1%; p_{non-inferiority}=0·0005). Definite or probable stent thrombosis occurred in one (0·1%) participant in the Resolute Onyx group and nine (0·7%) in the Orsiro group (hazard ratio 0·11 [95% CI 0·01-0·87]; p=0·0112).

INTERPRETATION

The Resolute Onyx stent was non-inferior to Orsiro for a combined safety and efficacy endpoint at 1-year follow-up in allcomers. The low event rate in both groups suggests that both stents are safe, and the very low rate of stent thrombosis in the Resolute Onyx group warrants further clinical investigation.

FUNDING

Biotronik and Medtronic.

Unravelment of Medtronic Onyx stent during bifurcation stenting using the jailed wire technique; An adverse effect of helical stent structure?

A 62-year old male underwent treatment of a bifurcation lesion in the left anterior descending coronary artery using provisional stenting with a jailed wire technique. Severe longitudinal stent deformation and unravelment of the stent part proximal of the bifurcation occurred when we tried to pull the jailed wire from the side branch. The described case poses a caution on the use of this specific stent(-design) in bifurcation lesions.

Handmade trileaflet valve design and validation for patch-valved conduit reconstruction using generalized regression machine learning model

Pulmonary valve diseases include the different degrees of aortic stenosis or congenital defects in children or adults. Valve repair or replacement surgery is commonly performed to relieve valvular dysfunction and improve the significant flow regurgitation in the aortic valve and the pulmonary valve. However, commercial valve stents and valved conduits are sometimes not available for children or patients with special conditions. The handmade trileaflet valve design has been used with different range of diameters for patch-valved conduit reconstruction. Thus, we propose a multiple regression model, as a generalized regression neural network (GRNN), to determine the optimal trileaflet parameters, including the width, length, and upper lower curved structure. Through computed tomography pulmonary angiography, while the diameter of the main pulmonary artery is determined, a leaflet template can be rapidly sketched and made. Using an experimental pulmonary circulation loop system, the efficacy of the valved conduit can be validated using the regurgitation fraction method. In contrast to commercial valve stents, experimental results indicate that the handmade trileaflet valve can also improve severe pulmonary regurgitations.

Percutaneous coronary intervention in left main coronary artery disease: the 13th consensus document from the European Bifurcation Club

The 2017 European Bifurcation Club (EBC) meeting was held in Porto (Portugal) and allowed a multidisciplinary international faculty to review and discuss the latest data collected in the field of coronary bifurcation interventions. In particular, the topic of percutaneous coronary intervention (PCI) on left main coronary artery (LM) disease was highlighted as a contemporary priority. Herein, we summarise the key LM anatomy features, the diagnostic modalities and available data that are relevant for a patient's procedural management. Since the clinical outcomes of patients undergoing PCI on LM disease may depend on both PCI team organisation and PCI performance, the optimal catheterisation laboratory set-up and the rationales for device and technique selection are critically reviewed. The best lesion preparation modalities, the different DES implantation technique choices and the strategies to be considered during PCI on unprotected LM for optimal PCI results are reviewed step by step.

Safety and effectiveness of zotarolimus-eluting stents for percutaneous coronary intervention: a systematic review

Drug-eluting stents revolutionized the treatment of coronary artery disease with vastly improved outcomes compared with bare metal stents. As stent technology has evolved, a wide variety of antiproliferative drugs have been developed to prevent stent restenosis and stent thrombosis. The Resolute stent system (Medtronic, CA, USA) elutes zotarolimus from a multipolymer blend to prevent early and late stent-related complications. The Resolute stents have evolved from the initial Resolute stent, to the Resolute Integrity™ and most recently, the Resolute Onyx™. These stents have been studied across a wide range of patients and coronary syndromes. They compare similarly in performance to their contemporary second generation stents. We present a review of the major trials involving these zotarolimus-eluting stents.

Bioresorbable Polymer-Coated Orsiro Versus Durable Polymer-Coated Resolute Onyx Stents (BIONYX): Rationale and design of the randomized TWENTE IV multicenter trial

AIM

The aim was to compare in a noninferiority trial the efficacy and safety of 2 contemporary drug-eluting stents (DESs): a novel, durable polymer-coated stent versus an established bioabsorbable polymer-coated stent.

METHODS AND RESULTS

The BIONYX trial (ClinicalTrials.gov-no.NCT02508714) is an investigator-initiated, prospective, randomized, patient- and assessor-blinded, international, multicenter study in all-comer patients with all types of clinical syndromes and lesions who require percutaneous coronary interventions with DES. Patients at 7 study sites in the Netherlands, Belgium, and Israel were randomly assigned (1:1, stratified for gender and diabetes mellitus) to treatment with the novel, zotarolimus-eluting, durable polymer-coated Resolute Onyx stent that has a radiopaque, thin-strut, CoreWire stent platform versus the sirolimus-eluting, bioresorbable polymer-coated Orsiro stent (reference device) that has a very thin-strut, cobalt-chromium stent backbone. The primary end point is the 1-year incidence of the composite clinical end point target vessel failure consisting of cardiac death, target vessel-related myocardial infarction, or clinically indicated target vessel revascularization. A power calculation, assuming a target vessel failure rate of 6.0% (noninferiority margin 2.5%), revealed that 2,470 study patients would give the study 80% power (α level 5%), allowing for up to 3% loss to follow-up. The first patient was enrolled on October 7, 2015; on December 23, 2016, the last patient entered the study.

CONCLUSIONS

BIONYX is a large-scale, prospective, randomized, international, multicenter trial comparing a novel DES with durable coating versus a reference DES with biodegradable coating in all-comers. The study is the first randomized assessment of the Resolute Onyx stent, which is an often-used DES outside the United States.