Heat resistance, membrane fluidity and sublethal damage in Staphylococcus aureus cells grown at different temperatures

Influence of spatial and temporal diversity and succession of microbial communities on physicochemical properties and flavor substances of soy sauce

In this study, the influence and relationship between the microbial structure composition at different spatial locations during soy sauce fermentation and the quality of soy sauce were investigated. Within 3-7 days of fermentation, the abundance of Chromohalobacter in the surface and upper layers of moromi was initially high but subsequently decreased. In contrast, Tetragenococcus exhibited low abundance on the surface of moromi at the beginning of fermentation but emerged as the absolute dominant bacteria by the end of the fermentation process. Throughout the fermentation period of 3-42 days, Staphylococcus and Bacillus were the predominant bacterial genera observed at the bottom of the moromi. In addition, Halanaerobium was the dominant bacterial genus in the crude soy sauce layer throughout the fermentation process. Tetragenococcus and Zygosaccharomyces were strongly positively correlated with total acid and ammonia nitrogen. Bacillus and Staphylococcus were significantly negatively correlated with the salt content.

Effects of Cross-Resistance of Salmonella Enterica Serovar Enteritidis Induced by Sodium Hypochlorite to Environmental Stress

To investigate the effects of repeated sodium hypochlorite stress on the resistance of Salmonella enterica Serovar Enteritidis (S. Enteritidis) LWCC1051. LWCC1051 was exposed to Trypticase Soy Broth (TSB) containing sodium hypochlorite concentrations of 9 mmol/L, 10 mmol/L, and 11 mmol/L. After 13 repeated transfers and incubations, three sodium hypochlorite resisted LWCC1051 strains were obtained. The D-values and colony morphologies of these strains were assessed. Their survival rates at 60 °C, 65 °C, 70 °C, 75 °C, and - 20 °C were determined and lethality curves at these temperatures were fitted using the Weibull model. Additionally, the Minimal Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) for these strains in various chemicals, including malic acid, citric acid, ascorbic acid, acetic acid, lactic acid, hydrochloric acid, sodium hydroxide, potassium hydroxide, calcium chloride, sodium chloride, and potassium chloride were ascertained. Sodium hypochlorite concentrations of 9 mmol/L, 10 mmol/L, and 11 mmol/L in TSB induced sodium hypochlorite resistance in S. Enteritidis. D-value increased with the frequency of stress exposure. Higher concentrations of sodium hypochlorite resulted in greater D-values and noticeable differences in colony morphologies. The Weibull model accurately represented the temperature resistance curves of LWCC1051 at the specified temperatures. With increasing sodium hypochlorite stress, both high and low-temperature resistances of LWCC1051 improved. Furthermore, under acetic acid stress, the MIC and MBC values of LWCC1051 strains, post exposure to 9 mmol/L, 10 mmol/L, and 11 mmol/L sodium hypochlorite, doubled. Sodium hypochlorite stress enhances the cross-resistance of LWCC1051 to high temperature, low temperature, and acetic acid treatments.

Microalgal-bacterial consortia for the treatment of livestock wastewater: Removal of pollutants, interaction mechanisms, influencing factors, and prospects for application

The livestock sector is responsible for a significant amount of wastewater globally. The microalgal-bacterial consortium (MBC) treatment has gained increasing attention as it is able to eliminate pollutants to yield value-added microalgal products. This review offers a critical discussion of the source of pollutants from livestock wastewater and the environmental impact of these pollutants. It also discusses the interactions between microalgae and bacteria in treatment systems and natural habitats in detail. The effects on MBC on the removal of various pollutants (conventional and emerging) are highlighted, focusing specifically on analysis of the removal mechanisms. Notably, the various influencing factors are classified into internal, external, and operating factors, and the mutual feedback relationships between them and the target (removal efficiency and biomass) have been thoroughly analysed. Finally, a wastewater recycling treatment model based on MBC is proposed for the construction of a green livestock farm, and the application value of various microalgal products has been analysed. The overall aim was to indicate that the use of MBC can provide cost-effective and eco-friendly approaches for the treatment of livestock wastewater, thereby advancing the path toward a promising microalgal-bacterial-based technology.

The effect of emulsifier type and oil inclusion on stress-related gene expression of Salmonella typhimurium in oil-in-water emulsion

Salmonella has been associated with numerous outbreaks from contaminated food products, including emulsions. Emulsions are influenced by emulsifier type and oil presence, which can have varying degrees of stress or protection on bacteria. Although our previous research has shown that emulsifier solutions, rather than emulsions, provide a protective effect on Salmonella typhimurium after thermal treatment, the underlying mechanism remains unclear. This study selected S. typhimurium as the model microorganism and utilized the same emulsifiers (Tween 20, Tween 80, Triton X-100) to create emulsifier solutions and emulsions with the same oil fraction (60% (v/v)) to examine their effect on the expression of nine selected genes (rpoE, rpoH, otsB, proV, fadA, fabA, dnaK, ibpA, ompC) associated with stress response. Specifically, the study observed variations in gene expression under normal and thermal stress at 55°C. After 20-h incubation, Triton X-100 emulsion caused an upregulation of stress-related genes, rpoE, otsB, and fabA, suggesting stressful environment. After thermal treatment, S. typhimurium in Triton X-100 solution showed a longer 5-log reduction time with increased proV and decreased fabA and ompC expression, suggesting enhanced thermal protection compared to its emulsion. Conversely, Tween 80 solution increased fabA and ompC expression, indicating greater membrane fluidity and passive diffusion, potentially reducing thermal resistance. However, according to the upregulation of ibpA, this effect was likely mitigated by the overproduction of heat shock proteins. Notably, Triton X-100 environments exhibited the most significant gene expression changes after heat treatment, whereas Tween 80 without oil was the most inhospitable for bacterial survival. These findings inform bacterial responses under various conditions, aiding food safety strategies.

Stringent Response Factor DksA Contributes to Fatty Acid Degradation Function to Influence Cell Membrane Stability and Polymyxin B Resistance of Yersinia enterocolitica

DksA is a proteobacterial regulator that binds directly to the secondary channel of RNA polymerase with (p)ppGpp and is responsible for various bacterial physiological activities. While (p)ppGpp is known to be involved in the regulation and response of fatty acid metabolism pathways in many foodborne pathogens, the role of DksA in this process has yet to be clarified. This study aimed to characterize the function of DksA on fatty acid metabolism and cell membrane structure in Yersinia enterocolitica. Therefore, comparison analysis of gene expression, growth conditions, and membrane permeabilization among the wide-type (WT), DksA-deficient mutant (YEND), and the complemented strain was carried out. It confirmed that deletion of DksA led to a more than four-fold decrease in the expression of fatty acid degradation genes, including fadADEIJ. Additionally, YEND exhibited a smaller growth gap compared to the WT strain at low temperatures, indicating that DksA is not required for the growth of Y. enterocolitica in cold environments. Given that polymyxin B is a cationic antimicrobial peptide that targets the cell membrane, the roles of DksA under polymyxin B exposure were also characterized. It was found that DksA positively regulates the integrity of the inner and outer membranes of Y. enterocolitica under polymyxin B, preventing the leakage of intracellular nucleic acids and proteins and ultimately reducing the sensitivity of Y. enterocolitica to polymyxin B. Taken together, this study provides insights into the functions of DksA and paves the way for novel fungicide development.

Increased heat tolerance and transcriptome analysis of Salmonella enterica Enteritidis PT 30 heat-shocked at 42 ℃

In this study, we compared the heat tolerance parameter (D_65℃) values of Salmonella enterica serovar Enteritidis PT 30 (S. Enteritidis ) heat adapted at different degrees (at 42 ℃ for 20-180 min) and cultivated using two methods. The treated group with the highest D_65℃ value (LP-42 ℃-60 min) and the untreated groups (Control-TSB and Control-TSA) were subjected to transcriptome analysis. Heat-adaptation increased the D_65℃ values of S. Enteritidis by 24.5-60.8%. The D_65℃ values of the LP-42 ℃-60 min group (1.85 ± 0.13 min, 7.7% higher) was comparable to that of the Control-TSA. A total of 483 up- and 443 downregulated genes of S. enteritidis were identified in the LP-42 ℃-60 min group (log₂fold change > 1, adjusted p-value < 0.05). Among these genes, 5 co-expressed and 15 differentially expressed genes in the LP-42 ℃-60 min and Control-TSA grops possibly contributed to the high D_65℃ values of S. Enteritidis . The Rpo regulon was involved in the heat adaptation of S. Enteritidis , as evidenced by the significant upregulation of rpoS, rpoN, and rpoE. KEGG enrichment pathways, such as biosynthesis of secondary metabolites, tricarboxylic acid, and ribosomes were identified and mapped to reveal the molecular mechanisms of S. enteritidis during heat adaptation. This study quantified the enhanced heat tolerance of S. Enteritidis heat adapted at different degrees of heat-adaptation. The results of this study may serve as a basis for elucidating the molecular mechanisms underlying the enhanced heat tolerance at the transcriptome level.

Transcriptome Analysis of the Influence of High-Pressure Carbon Dioxide on Saccharomyces cerevisiae under Sub-Lethal Condition

High-pressure carbon dioxide (HPCD), a novel non-thermal pasteurization technology, has attracted the attention of scientists due to its high pasteurization efficiency at a lower temperature and pressure. However, the inactivation mechanism has not been well researched, and this has hindered its commercial application. In this work, we used a sub-lethal HPCD condition (4.0 MPa, 30 °C) and a recovery condition (30 °C) to repair the damaged cells. Transcriptome analysis was performed by using RNA sequencing and gene ontology analysis to investigate the detailed lethal mechanism caused by HPCD treatment. RT-qPCR analysis was conducted for certain upregulated genes, and the influence of HPCD on protoplasts and single-gene deletion strains was investigated. Six major categories of upregulated genes were identified, including genes associated with the pentose phosphate pathway (oxidative phase), cell wall organization or biogenesis, glutathione metabolism, protein refolding, phosphatidylcholine biosynthesis, and AdoMet synthesis, which are all considered to be associated with cell death induced by HPCD. The inactivation or structure alteration of YNL194Cp in the organelle membrane is considered the critical reason for cell death. We believe this work contributes to elucidating the cell-death mechanism and providing a direction for further research on non-thermal HPCD sterilization technology.

Inactivation efficacy and mechanisms of atmospheric cold plasma on Alicyclobacillus acidoterrestris: Insight into the influence of growth temperature on survival

The bactericidal effect of dielectric barrier discharge-atmospheric cold plasma (DBD-ACP, 20, and 30 kV) against Alicyclobacillus acidoterrestris on the saline solution and apple juice was investigated. Results show that DBD-ACP is effective for the inactivation of A. acidoterrestris by causing significant changes in cell membrane permeability and bacterial morphology. The effect of culture temperatures on the resistance of A. acidoterrestris to DBD-ACP was also studied. A. acidoterrestris cells grown at 25°C had the lowest resistance but it was gradually increased as the culture temperature was increased (25-45°C) (p < 0.05). Moreover, results from Fourier transform infrared spectroscopy (FT-IR) and Gas Chromatography-Mass Spectrometer (GC-MS) analysis showed that the increase in the culture temperature can gradually cause the decreased level of cyclohexaneundecanoic acid in the cell membrane of A. acidoterrestris (p < 0.05). In contrast, cyclopentaneundecanoic acid, palmitic acid, and stearic acid showed an increasing trend in which the fluidity of the bacterial cell membrane decreased. This study shows a specific correlation between the resistance of A. acidoterrestris and the fatty acid composition of the cell membrane to DBD-ACP.

3D printing of MXene composite hydrogel scaffolds for photothermal antibacterial activity and bone regeneration in infected bone defect models

The repair of infected bone defects with irregular shapes is still a challenge in clinical work. Infected bone defects are faced with several major concerns: the complex shapes of bone defects, intractable bacterial infection and insufficient osseointegration. To solve these problems, we developed a personalized MXene composite hydrogel scaffold GelMA/β-TCP/sodium alginate (Sr²⁺)/MXene (Ti₃C₂) (GTAM) with photothermal antibacterial and osteogenic abilities by 3D printing. In vitro, GTAM scaffolds could kill both Gram-positive and Gram-negative bacteria by NIR irradiation due to the excellent photothermal effects of MXene. Furthermore, rat bone marrow mesenchymal stem cells were mixed into GTAM bioinks for 3D bioprinting. The cell-laden 3D printed GTAM scaffolds showed biocompatibility and bone formation ability depending on MXene, crosslinked Sr²⁺, and β-TCP. In vivo, we implanted 3D printed GTAM scaffolds in S. aureus-infected mandible defects of rats with NIR irradiation. GTAM scaffolds could accelerate the healing of infection and bone regeneration, and play synergistic roles in antibacterial and osteogenic effects. This study not only provides a strategy for the precise osteogenesis of infected bone defects, but also broadens the biomedical applications of MXene photothermal materials.

Multi-Channel Optical Device for Solar-Driven Bacterial Inactivation under Real-Time Temperature Feedback

Solar-driven photothermal antibacterial devices have attracted a lot of interest due to the fact that solar energy is one of the cleanest sources of energy in the world. However, conventional materials have a narrow absorbance band, resulting in deficient solar harvesting. In addition, lack of knowledge on temperature change in these devices during the photothermal process has also led to a waste of energy. Here, we presented an elegant multi-channel optical device with a multilayer structure to simultaneously address the above-mentioned issues in solar-driven antibacterial devices. In the photothermal channel, semiconductor IrO₂ -nanoaggregates exhibited higher solar absorbance and photothermal conversion efficiency compared with nanoparticles. In the luminescence channel, thermal-sensitive Er-doped upconversion nanoparticles were utilized to reflect the microscale temperature in real-time. The bacteria were successfully inactivated during the photothermal effect under solar irradiation with temperature monitoring. This study could provide valuable insight for the development of smart photothermal devices for solar-driven photothermal bacterial inactivation in the future.

Niobium Carbide MXene Augmented Medical Implant Elicits Bacterial Infection Elimination and Tissue Regeneration

Incurable bacterial infections, impenetrable microbial biofilm, and irreversible antibiotic resistance are among the most dangerous threats for humans. With few effective strategies available in antimicrobial and antibiofilm development, innovative methodologies inspired by the advances in other fields such as nanomedicine are becoming more and more attractive to realize innovative antibacterial agents. Herein, a 2D niobium carbide (Nb₂C) MXene titanium plate (Nb₂C@TP)-based clinical implant with practical multimodal anti-infection functions was developed. Such emerging modes are capable of destroying biofilms for direct bacteria elimination through down-regulating bacterial energy metabolism pathways, suppressing biofilm formation, and enhancing as-formed biofilm detachment via an activating accessory gene regulator. Another intriguing feature of this nanomedicine is the sensitization ability toward bacteria via photothermal transduction, which reduces the temperature necessary for bacteria eradication and mitigates possible normal tissue damage. Moreover, the Nb₂C@TP medical implant is able to alleviate proinflammatory responses by scavenging excessive reactive oxygen species in infectious microenvironments, benefiting angiogenesis and tissue remodeling.

Thermal and non-thermal treatment effects on Staphylococcus aureus biofilms formed at different temperatures and maturation periods

The objective of this study was to investigate the effect of temperature and maturation period on the resistance of Staphylococcus aureus biofilms to thermal and non-thermal treatments. First, biofilm development was compared at three different temperatures (15, 25, and 37°C) for 5 days. The cell population at 15 and 25°C remained relatively consistent approximately at 6.3 log CFU/cm², whereas 37°C resulted in the highest cell population on day 1 (7.6 log CFU/cm²) followed by a continual decline. Then, biofilm resistance to steam and sodium hypochlorite (NaOCl) treatments was evaluated. Obtained results highlighted that biofilms had different resistance to both treatments depending on development conditions. Specifically, steam treatment of 10 s eliminated 4.1 log CFU/cm² of the biofilm formed at 25°C for 5 days. The same treatment inactivated over 5 log population of biofilms developed in other temperature and maturation period conditions. Treatment with NaOCl reduced approximately 1 log CFU/cm² of biofilm cells developed at 25°C for 5 days. However, inactivation was found to be over 2 log CFU/cm² under other development conditions. An extracellular polymeric substances (EPS) quantification using 96-well plates and stainless steel coupons was conducted. In the 96-well plate experiment, it was found that the highest amount of polysaccharide was secreted at 25°C (p < 0.05), while total biomass and protein contents were greatest at 37°C (p < 0.05). No significant difference in EPS content was observed for stainless steel, but the results displayed a similar trend to the 96-well plate. In particular, biofilms developed at 25°C tended to secret the highest amount of polysaccharide, which aligned with the current literature. This finding indicated that polysaccharide was the main contribution to the enhanced resistance of S. aureus biofilms. Overall, it was shown that biofilms formed at 25°C for 5 days exhibited the greatest resistance to thermal and nonthermal treatments due to the elevated exopolysaccharide secretion. This study demonstrates that temperature and maturation period significantly affect the resistance of S. aureus biofilms to thermal and non-thermal treatments.

New insights into thermo-acidophilic properties of Alicyclobacillus acidoterrestris after acid adaptation

Alicyclobacillus acidoterrestris has unique thermo-acidophilic properties and is the main cause of fruit juice deterioration. Given the acidic environment and thermal treatment during juice processing, the effects of acid adaptation (pH 3.5, 3.2, and 3.0) on the resistance of A. acidoterrestris to heat (65 °C, 5 min) and acid (pH = 2.2, 1 h) stresses were investigated for the first time. The results showed that acid adaptation induced cross-protection against heat stress of A. acidoterrestris and acid tolerance response, and the extent of induced tolerance was increased with the decrease of adaptive pH values. Acid adaptation treatments did not disrupt the membrane potential stability and intracellular pH homeostasis, but reduced intracellular ATP concentration, increased cyclic fatty acids content, and changed the acquired Fourier transform infrared spectra. Transcription levels of stress-inducible (dnaK, grpE, clpP, ctsR) genes and genes related to spore formation (spo0A, ctoX) were up-regulated after acid adaptation, and spore formation was observed by scanning electron microscopy. This study revealed that the intracellular microenvironment homeostasis, expression of chaperones and proteases, and spore formation played a coordinated role in acid stress adaptive responses, with implications for applications in fruit juice processing.