A study to evaluate the reliability of using two-dimensional photographs, three-dimensional images, and stereoscopic projected three-dimensional images for patient assessment

Evaluation of two stereophotogrametry software for 3D reconstruction of virtual facial models

Objective:

The present study aimed to evaluate the accuracy of 3D facial soft tissue virtual models produced by two photogrammetry softwares (AgiSoft Photoscan and 3DF Zephyr Free), when compared to those created by cone beam computed tomography (CBCT).

Methods:

Ten patients were submitted to two sequences of photographs performed with a DSLR camera (with and without the aid of a ring flash) and CBCT scans. Each photo series for each patient was processed with the softwares, and at the end, five models of each patient were generated: 1) CBCT, 2) AAL (Agisoft Ambient Light), 3) AFL (Agisoft Flash Light), 4) ZAL (Zephyr Ambient Light), and 5) ZFL (Zephyr Flash Light). Color coded maps and root-mean-square (RMS) distances were used to compare the photogrammetry models to the CBCT ones.

Results:

One sample t-test showed significant differences between all methods versus CBCT. The worst results were seen in the ZAL group (discrepancies up to 5.17mm), while the best results were produced by AAL group (discrepancies up to 2.11mm).

Conclusions:

It can be concluded that this type of virtual facial models are reasonably accurate, although not perfect, and considering its lower biological and financial cost, they may play an important role in specific situations.

Three-dimensional soft tissue changes in orthodontic extraction and non-extraction patients: A prospective study

OBJECTIVES

To assess the soft tissue changes in orthodontic extraction and non-extraction patients on 3D stereophotogrammetric images.

SETTING AND SAMPLE

23 extraction (22.2 ± 9.2 years) and 23 non-extraction (20.3 ± 11.1 years) consecutive patients were enrolled at the Sections of Orthodontics at Aarhus University and at University of Naples Federico II.

METHODS

All patients had a first 3D image taken after bonding of brackets on the upper incisors (T0), and a second 3D image (T1) after space closure in the extraction group or at insertion of the first SS or TMA rectangular wire in the non-extraction group. The 3D images were captured with 3dMDFace System and analysed with 3dMDVultus Software. After placing 19 landmarks, 15 measurements were obtained. Intragroup changes were analysed with paired t-test and intergroup changes with unpaired t-test (P < .05).

RESULTS

Superimpositions of the 3D images at T0 and T1 visualized with colour-coded maps showed that soft tissue changes primarily happened in the perioral area in both groups. The Nasolabial angle increased significantly in the extraction group (3°± 4.1, P = .002), while it decreased in the non-extraction group (-1.5°± 5.5°, P = .002). There was a significant difference between the two groups (4.4°, P = .004).

CONCLUSIONS

3D comparison of the soft tissues in the extraction and non-extraction groups showed statistically significant, but clinically limited differences in the perioral area. The Nasolabial angle was significantly larger at T1 in the extraction group compared with the non-extraction group.

Evaluation of the relationship between malar projection and lower facial convexity in terms of perceived attractiveness in 3-dimensional reconstructed images

Background

This study aimed to investigate dental student’s perception of facial attractiveness with regard to different combinations of anteroposterior malar-jaw positions using 3-dimensional (3-D) reconstructed images of subjects.

Methods

Two Chinese young adults (1 male and 1 female) with straight profiles and average malar projections were selected for the study. 3-D facial images and cone-beam computed tomography images of these two subjects were superimposed using 3-D imaging software. Lateral and oblique views of nine different images were created by moving the maxillomandibular complex and/or zygomatic bone by 4 mm either forward or backward along the sagittal plane. One hundred three undergraduate dental students (n = 24, 33, and 46 students from the Year 3, 4, and 5, respectively) then scored lateral and 45° oblique view images of the newly reconstructed faces.

Results

In the present study, images with a neutral malar and retruded jaws were found to be the most attractive in both male and female subjects. In addition, the Protruded malar (PM) group (p < 0.001), and the Retruded Jaws (RJ) group were rated more attractive (p < 0.001). Furthermore, the Relatively Prominent malar (RP) group was rated more attractive (p < 0.001) when malar-jaw relative positions were compared.

Conclusion

This study shows that a neutral or a protruded malar favours facial attractiveness in both Chinese male and female subjects. Therefore, an appropriate relationship between malar projection and lower facial convexity should be taken into consideration while designing the orthodontic/orthognathic treatment plans for enhanced aesthetic outcomes.

Two-dimensional versus three-dimensional Frӓnkel Manoeuvre: a reproducibility study

Background/Objectives

To assess intra- and inter-observer reproducibility of the evaluation of the Frӓnkel Manoeuvre (FM) on three-dimensional (3D) scans and to compare it to the assessment on two-dimensional (2D) pictures.

Materials/Methods

This study included 44 individuals with a skeletal Class II malocclusion [9–16-years old mean age ± standard deviation: 13.5 ± 2.01 years]. All patients had a full Class II molar relationship, overjet ≥6 mm and point A, Nasion, point B angle (ANB) ≥5 degrees. During the FM, each patient was invited to bite in centric occlusion and then to posture the mandible forward to reach a Class I molar relationship. The FM was recorded both by a normal camera and a 3D scanner (3dMD system). Six examiners divided into two groups according to their orthodontic clinical experience (&lt;5 and &gt;10 years), and one gold standard in the evaluation of FM, commented twice (every 15 days) on both 2D photographs (T0 and T2) and 3D scans (T1 and T3). The intra-observer agreement and the inter-observer agreement compared to the gold standard were evaluated by computing the Cohen’s K.

Results

The agreement between observations for each examiner ranged from 0.36 to 1 on 2D pictures (T0 versus T2), and from 0.22 to 0.69 on 3D scans (T1 versus T3). The overall agreement was 0.63 (95 per cent CI = 0.35–0.91) in 2D analysis and 0.5 (95 per cent CI = 0.35–0.64) in 3D analysis.

Conclusions/Implications

The FM was less reproducible when performed on 3D records than on 2D pictures.

Reproducibility of the index of orthognathic functional treatment need scores derived from plaster study casts and their three-dimensional digital equivalents: a pilot study

OBJECTIVE

To determine the reproducibility of Index of Orthognathic Functional Treatment Need (IOFTN) scores derived from plaster casts and their three-dimensional (3D) digital equivalents.

DESIGN

Pilot study, prospective analytical.

SETTING

UK hospital orthodontic department.

PARTICIPANTS

Thirty casts and their digital equivalents, representing the pre-treatment malocclusions of patients requiring orthodontic-orthognathic surgical treatment, were scored by four clinicians using IOFTN.

METHODS

Casts were scanned using a 3Shape digital scanner and 3D models produced using OrthoAnalyzer^TM (3Shape Ltd, Copenhagen, Denmark). Examiners independently determined the IOFTN scores for the casts and digital models, to test their inter- and intra-operator reliability using weighted Kappa scores.

RESULTS

Intra-operator agreement with IOFTN major categories (1-5: treatment need) was very good for plaster casts (0.83-0.98) and good-very good for digital models (0.78-0.83). Inter-operator agreement was moderate-very good for casts (0.58-0.82) and good-very good for digital models (0.65-0.92). Intra-operator agreement with IOFTN sub-categories (1-14: feature of malocclusion) was good-very good for casts (0.70-0.97) and digital models (0.80-0.94). Inter-operator agreement was moderate-good for casts (0.53-0.77); and moderate-very good for the digital models (0.58-0.90).

CONCLUSIONS

Digital models are an acceptable alternative to plaster casts for examining the malocclusion of patients requiring combined orthodontic-orthognathic surgical treatment and determining treatment need.

Usefulness and capability of three-dimensional, full high-definition movies for surgical education

Background

Because of changing surgical procedures in the fields of oral and maxillofacial surgery, new methods for surgical education are needed and could include recent advances in digital technology. Many doctors have attempted to use digital technology as educational tools for surgical training, and movies have played an important role in these attempts. We have been using a 3D full high-definition (full-HD) camcorder to record movies of intra-oral surgeries.

Method

The subjects were medical students and doctors receiving surgical training who did not have actual surgical experience (n = 67). Participants watched an 8-min, 2D movie of orthognathic surgery and subsequently watched the 3D version. After watching the 3D movie, participants were asked to complete a questionnaire.

Result

A lot of participants (84%) felt a 3D movie excellent or good and answered that the advantages of a 3D movie were their appearance of solidity or realism. Almost all participants (99%) answered that 3D movies were quite useful or useful for medical practice.

Conclusions

Three-dimensional full-HD movies have the potential to improve the quality of medical education and clinical practice in oral and maxillofacial surgery.