Carvedilol dissolution improvement by preparation of solid dispersions with porous silica

The comparison of melt technologies based on mesoporous carriers for improved carvedilol dissolution

High-shear (HS) melt granulation and hot melt extrusion (HME) were compared as perspective melt-based technologies for preparation of amorphous solid dispersions (ASDs). ASDs were prepared using mesoporous carriers (SyloidⓇ 244FP or NeusilinⓇ US2), which were loaded with carvedilol dispersed in polymeric matrix (polyethylene glycol 6000 or SoluplusⓇ). Formulations with high carvedilol content were obtained either by HME (11 extrudates with polymer:carrier ratio 1:1) or HS granulation (6 granulates with polymer:carrier ratio 3:1). DSC and XRD analysis confirmed the absence of crystalline carvedilol for the majority of prepared ADSs, thus confirming the stabilizing effect of selected polymers and carriers over amorphous carvedilol. HME produced larger particles compared to HS melt granulation, which was in line with better flow time and Carr index of extrudates. Moreover, SEM images revealed smoother surface of ASDs obtained by HME, contributing to less obstructed flow. The rougher and more porous surface of HS granules was correlated to larger granule specific surface area, manifesting in faster carvedilol release from SyloidⓇ 244FP-based granules, as compared to their HME counterparts. Regarding dissolution, the two HS-formulations performed superior to pure crystalline carvedilol, thereby confirming the suitability of HS melt granulation for developing dosage forms with improved carvedilol dissolution.

Curcumin-loaded soluplus® based ternary solid dispersions with enhanced solubility, dissolution and antibacterial, antioxidant, anti-inflammatory activities

Amorphous solid dispersion (ASD) has emerged to be an outstanding strategy among multiple options available for improving solubility and consequently biological activity. Interestingly several binary SD systems continue to exhibit insufficient solubility over time. Therefore, the goal of current research was to design ternary amorphous solid dispersions (ASDs) of hydrophobic model drug curcumin (CUR) to enhance the solubility and dissolution rate in turn, presenting enhanced anti-bacterial, antioxidant and anti-inflammatory activity. For this purpose several ternary solid dispersions (TSDs) consisting of Soluplus®, Syloid® XDP 3150, Syloid® 244 and Poloxamer® 188 in combination with HPMC E5 (binary carrier) were prepared using solvent evaporation method. Both solubility and dissolution testing of prepared solid dispersion were performed to determine the increase in solubility and dissolution. Solid state investigation was carried out utilizing infrared spectroscopy, also known as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM),Differential scanning calorimetry (DSC) and X-ray diffraction (XRD).Optimized formulations were also tested for their biological effectiveness including anti-bacterial, anti-oxidant and anti-inflammatory activity. Amid all Ternary formulations F3 entailing 20 % soluplus® remarkably improved the solubility (186 μg/ml ± 3.95) and consequently dissolution (91 % ± 3.89 %) of curcumin by 3100 and 9 fold respectively. These finding were also supported by FTIR, SEM, XRD and DSC. In-vitro antibacterial investigation of F3 also demonstrated significant improvement in antibacterial activity against both gram positive (Staphylococcus aureus, Bacillus cereus) and gram negative (Pseudomonas aeruginosa, Escherichia coli) bacteria. Among all the tested strains Staphylococcus aureus was found to be most susceptible with a zone of inhibition of 24 mm ± 2.87. Antioxidant activity of F3 was also notably enhanced (93 % ± 5.30) in contrast to CUR (69 % ± 4.79). In vitro anti-inflammatory assessment also exhibited that F3 markedly protected BSA (bovine serum albumin) from denaturation with percent BSA inhibition of 80 % ± 3.16 in comparison to CUR (49 % ± 2.91). Hence, F3 could be an effective solid dispersion system for the delivery of model hydrophobic drug curcumin.

Tuning the Physical State of Aripiprazole by Mesoporous Silica

The main purpose of our studies is to demonstrate that commercially available mesoporous silica (MS) can be used to control the physical state of aripiprazole (ARP). The investigations performed utilizing differential scanning calorimetry and broadband dielectric spectroscopy reveal that silica can play different roles depending on its concentration in the system with amorphous ARP. At low MS content, it activates recrystallization of the active pharmaceutical ingredient and supports forming the III polymorphic form of ARP. At intermediate MS content (between ca. 27 and 65 wt %), MS works as a recrystallization inhibitor of ARP. At these concentrations, the formation of III polymorphic form is no longer favorable; therefore, it is possible to use this additive to obtain ARP in either IV or X polymorphic form. At the same time, employing MS in concentrations >65 wt % amorphous form of ARP with high physical stability can be obtained. Finally, regardless of the polymorphic form it crystallizes into, each composite is characterized by the same temperature dependence of relaxation times in the supercooled and glassy states.

Investigating the Influence of Processing Conditions on Dissolution and Physical Stability of Solid Dispersions with Fenofibrate and Mesoporous Silica

The study aimed to enhance the solubility of the poorly water-soluble drug, fenofibrate, by loading it onto mesoporous silica, forming amorphous solid dispersions. Solid dispersions with 30% fenofibrate were prepared using the solvent evaporation method with three solvents (ethyl acetate, acetone, and isopropanol) at different temperatures (40 °C, boiling point temperature). Various characteristics, including solid-state properties, particle morphology, and drug release, were evaluated by different methods and compared to a pure drug and a physical mixture of fenofibrate and silica. Results revealed that higher solvent temperatures facilitated complete amorphization and rapid drug release, with solvent choice having a lesser impact. The optimal conditions for preparation were identified as ethyl acetate at boiling point temperature. Solid dispersions with different fenofibrate amounts (20%, 25%, 35%) were prepared under these conditions. All formulations were fully amorphous, and their dissolution profiles were comparable to the formulation with 30% fenofibrate. Stability assessments after 8 weeks at 40 °C and 75% relative humidity indicated that formulations prepared with ethyl acetate and at 40 °C were physically stable. Interestingly, some formulations showed improved dissolution profiles compared to initial tests. In conclusion, mesoporous silica-based solid dispersions effectively improved fenofibrate dissolution and demonstrated good physical stability if prepared under appropriate conditions.

The Fabrication, Drug Loading, and Release Behavior of Porous Mannitol

Porous materials are widely used as an effective strategy for the solubilization of insoluble drugs. In order to improve the solubility and bioavailability of low water-solubility drugs, it is necessary to prepare porous materials. Mannitol is one of the most popular excipients in food and drug formulations. In this study, porous mannitol was investigated as a drug carrier for low water solubility drugs. Its fabrication, drug loading, and drug release mechanisms were investigated. Porous mannitol was fabricated using the co-spray-antisolvent process and utilizing polyvinylpyrrolidone K30 (PVP K30) as the template agent. Porous mannitol particles were prepared by changing the proportion of the template agent, spraying the particles with mannitol, and eluting with ethanol in order to regulate their pore structure. In subsequent studies, porous mannitol morphology and characteristics were determined systematically. Furthermore, curcumin and ibuprofen, two poorly water-soluble drugs, were loaded into porous mannitol, and their release profiles were analyzed. The results of the study indicated that porous mannitol can be prepared using PVP K30 as a template and that the amount of template agent can be adjusted in order to control the structure of the porous mannitol. When the template agent was added in amounts of 1%, 3%, and 5%, the mannitol pore size increased by 167.80%, 95.16%, and 163.98%, respectively, compared to raw mannitol. Molecular docking revealed that mannitol and drugs are adsorbents and adhere to each other by force interaction. The cumulative dissolution of curcumin and ibuprofen-loaded porous mannitol reached 69% and 70%, respectively. The release mechanism of curcumin and ibuprofen from drug-loaded mannitol was suitable for the Korsmeyer-Peppas kinetic model. In summary, the co-spray-antisolvent method proved effective in fabricating porous materials rapidly, and porous mannitol had a remarkable effect on drug solubilization. The results obtained are conducive to the development of porous materials.

Hot "Dissolving" Extrusion of Lurasidone with Natural Liquid Small Molecule for Amorphous Solid Dispersion Based Self-Assembled Submicron Emulsion

Nowadays, ≈90% of new drug candidates under development are poorly bioavailable due to their low solubility and/or permeability. Herein, a natural liquid small molecule trans-anethole (TA) is introduced into the drug-polymer system lurasidone (LUS)-poly (1-vinylpyrrolidone-co-vinyl acetate) (VA64), notably improving the compatibility of components for the successful preparation of amorphous solid dispersion (ASD) and facilitating the formation of self-emulsifying drug delivery system (SEDDS) during dissolution. LUS-TA-VA64 ASD shows enhanced supersaturation with a long maintenance time of at least 24 h over pure LUS. The strong non-covalent force between VA64 (as emulsifier) and TA (as oil phase)/ water promotes the self-assembly of submicron emulsion and ensures its stability for at least 10 h. Compared to the commercial salt form of LUS, the ASD shows twofold increase in peak plasma concentration (Cmax ) and area under plasma concentration-time profiles (AUC), 1.5-fold increase in peak time (Tmax ), and twofold decrease in AUC-based coefficient of variation (CV) (59%→26%) after a single oral dose to a rabbit.

Physicochemical reports of gliclazide-carplex solid dispersions and tablets prepared with directly compressible co-processed excipients

OBJECTIVES

The main goal of this research was to develop better tablet formulations by utilizing solid dispersions (SDs) and coprocessing excipients composite to achieve a better release rate of poor water-soluble gliclazide.

METHODS

The solvent evaporation method made SDs of gliclazide with different carriers carplex 67, carplex 80, and carplex FPS 500 (weight ratio, 1:1). The drug release patterns of the SDs were all evaluated and optimized. The SDs were illustrated by using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray powder diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR). Tablet batches FGC-1 to 8 were made using gliclazide-carplex 67 solid dispersions (GC67-SDs) and the co-processed composite of excipients, namely starch-MCC-povidone (SMP) and lactose-MCC-povidone-sodium starch glycolate (LMPS), prepared with coprocessing technology. We evaluated these batches by conducting physicochemical tests and comparing them to the existing commercial brand.

RESULTS

In a water medium, the release of gliclazide from SDs peaked within the first 30 min, showing a roughly 5∼6-fold increase compared to plain gliclazide. This quick dissolution rate may be due to the amorphization of the drug, which improved the specific surface area, and increased wettability caused by the hydrophilic properties of carplex particles. This has been confirmed through SEM, DSC, FTIR, and PXRD analysis. All FGC formulations had satisfactory pre-compression factor results, while the post-compression parameters indicated good mechanical strength and homogeneity across the blend. All produced tablets met the weight variation, friability, and disintegration time limit set by the compendia. Through in vitro drug release testing, it was discovered that all FGC tablet batches had consistent and nearly identical release results compared to SDs of gliclazide. However, the FGC-5 to 8 batches containing LMPS composites were determined to be the most effective formulations. In the first 30 min in a water medium, the percentage of drug generated from the FGC-8 tablets involving GC67-SDs and co-processed composite LMPS-4 is approximately 3.5 times higher than the average release of currently marketed products (MPs). After storing the selected FGC tablet batches for three months at 40 °C and 75 % RH, there were no noticeable alterations in the amount of drug and drug release profiles across the batches.

CONCLUSION

Based on these findings, it appears that using the carplex silica-based SDs approach, along with gliclazide and co-processing excipients composite, could result in significant benefits compared to the current commercial brands. This approach could be effectively utilized to create solid dosage forms for drugs that have low solubility in water.

Overview and thermodynamic modelling of deep eutectic solvents as co-solvents to enhance drug solubilities in water

The poor water solubility of active pharmaceutical ingredients (APIs) is a major challenge in the pharmaceutical industry. Co-solvents are sometimes added to enhance drug dissolution. A novel group of co-solvents, the Deep Eutectic Solvents (DES), have gained interest in the pharmaceutical field due to their good solvent power, biodegradability, sustainability, non-toxicity, and low cost. In this study, we first provide an overview of all the literature solubility studies involving a drug or API + water + DES, which can be a valuable list to some researchers. Then, we analyze these systems with focus on each individual drug/API and provide statistical information on each. A similar analysis is carried out with focus on the individual DESs. An investigation of the numeric values of the water-solubility enhancement by the different DESs for various drugs indicates that DESs are indeed effective co-solvents, with varying degrees of solubility enhancement, even up to 15-fold. This is strongly encouraging, indicating the need for further studies to find the most promising DESs for solubility enhancement. However, time-consuming and costly trial and error should be prevented by first screening, using theoretical-based or thermodynamic-based models. Based on this conclusion, the second part of the study is concerned with investigating and suggesting accurate thermodynamic approaches to tackle the phase equilibrium modeling of such systems. For this purpose, a large data bank was collected, consisting of 2009 solubility data of 25 different drugs/APIs mixed with water and 31 different DESs as co-solvents at various DES concentrations, over wide ranges of temperatures at atmospheric pressure. This data bank includes 107 DES + water + drug/API systems in total. The solubility data were then modeled according to the solid-liquid equilibrium framework, using the local composition activity coefficient models of NRTL, and UNIQUAC. The results showed acceptable behavior with respect to the experimental values and trends for all of the investigated systems, with AARD% values of 9.65 % and 14.08 % for the NRTL and UNIQUAC models, respectively. In general, the lower errors of NRTL, as well as its simpler calculation process and the requirement of fewer component parameters, suggest the priority of NRTL over UNIQUAC for use in this field.

Characterization of Co-amorphous Carvedilol-Maleic Acid System Prepared by Solvent Evaporation

The aim of this study was to enhance the solubility and stability of the water-insoluble drug carvedilol (CAR) with maleic acid (MLE) to create a co-amorphous system by a solvent evaporation method. Phase diagrams of co-amorphous CAR-MLE, constructed from peak height in the Fourier-transform infrared (FTIR) spectra and the glass transition temperature (Tg) from differential scanning calorimetry (DSC) measurements, revealed that the optimal molar ratio of CAR to MLE was 2:1. The FTIR spectra indicated that the secondary amine-derived peak of CAR and the carboxy group-derived peak of MLE disappeared in the CAR:MLE (2:1) co-amorphous system. DSC measurements showed that the endothermic peaks associated with the melting of CAR and MLE disappeared and a Tg at 43 °C was apparent. Furthermore, the solubility of CAR tested using the shaking flask method for 24 h at 37 °C was 1.2 μg/mL, whereas that of the co-amorphous system was approximately three times higher, at 3.5 μg/mL. Finally, the stability was evaluated by powder- X-ray diffraction at 40 °C; no clear diffraction peaks originating from crystals were observed in the amorphous state until after approximately 3 months of storage. These results indicate that co-amorphization of CAR with MLE improved the solubility of CAR while maintaining its stability in an amorphous form.

Compaction Behavior of Co-Amorphous Systems

Co-amorphous systems have been shown to be a promising strategy to address the poor water solubility of many drug candidates. However, little is known about the effect of downstream processing-induced stress on these systems. The aim of this study is to investigate the compaction properties of co-amorphous materials and their solid-state stability upon compaction. Model systems of co-amorphous materials consisting of carvedilol and the two co-formers aspartic acid and tryptophan were produced via spray drying. The solid state of matter was characterized using XRPD, DSC, and SEM. Co-amorphous tablets were produced with a compaction simulator, using varying amounts of MCC in the range of 24 to 95.5% (w/w) as a filler, and showed high compressibility. Higher contents of co-amorphous material led to an increase in the disintegration time; however, the tensile strength remained rather constant at around 3.8 MPa. No indication of recrystallization of the co-amorphous systems was observed. This study found that co-amorphous systems are able to deform plastically under pressure and form mechanically stable tablets.

Considerations on the Kinetic Processes in the Preparation of Ternary Co-Amorphous Systems by Milling

In non-strongly interacting co-amorphous systems, addition of a polymer, to further stabilize the co-amorphous systems, may influence the phase behavior between the components. In this study, the evolution of the composition of the amorphous phase in the ternary system carvedilol (CAR)-tryptophan (TRP)-hydroxypropylmethyl cellulose (HPMC) was investigated, based upon previously formed and characterized binary systems to which the third component was added (CAR - TRP + HPMC, CAR - HPMC + TRP and TRP - HPMC + CAR). Ball milling was used as the preparation method for all binary and ternary systems. The influence of the milling time on the co-amorphous systems was monitored by DSC and XRPD. Addition of HPMC reduced the miscibility of CAR with TRP due to hydrogen bond formation between CAR and polymer. These bonds became dominant for the interaction pattern. In addition, when CAR or TRP exceeded the miscibility limit in HPMC, phase separation and eventually crystallization of CAR and TRP was observed. All ternary co-amorphous systems eventually reached the same composition, albeit following different paths depending on the initially used binary system.

Enhanced Efficacy of Carvedilol by Utilization of Solid Dispersion and Other Novel Strategies: A Review

Carvedilol is classified as a second class drug of Biopharmaceutical classification system (BCS), and it is an excellent beta blocker and vasodilating agent. It is used in a diverse range of disease states. Despite having tremendous advantages, the drug cannot be used effectively and productively due to aquaphobicity and poor bioavailability. To overcome this limitation, numerous novel approaches and tactics have been introduced over the past few years, such as Selfmicro emulsifying drug delivery systems (SMEDDS), nanoparticles, solid dispersions and liposomal drug delivery. The present review aims to accentuate the role of solid dispersion in improving the dissolution profile and aqua solubility of carvedilol and also to emphasize other novel formulations of carvedilol proposed to prevail the limitations of carvedilol. Solid dispersion and other novel approaches were found to play a significant role in overcoming the drawbacks of carvedilol, among which solid dispersion is the most feasible and effective approach being used worldwide. Reduced particle size, more wettability, and large surface area are obtained by the implementation of solid dispersion technique, hence improving carvedilol solubility and bioavailability.

Antifungal Activity of Camelus-Derived LFA-LFC Chimeric Peptide Gelatin Film and Effect on Oral Bacterial Biofilm

The objective of this study was to construct lactoferrin (LFA-LFC) chimeric peptide gelatin drug-loaded fiber film by tissue engineering strategy, and study its bacteriostatic effect on oral pathogens (especially Candida albicans) and its effect on biofilm. First of all, LFA-LFC chitosan nanoparticles were prepared firstly, and then fluconazole gelatin (LF/GH/F) film loaded with LFA-LFC was prepared by electrospinning. Scanning electron microscope (SEM), mechanical strength, drug release, cytotoxicity, and real-time PCR were used to test the properties of the synthesized materials. SEM showed that there was the reticular structure for fiber film before and after cross-linking. LF/GH/F film had no obvious cytotoxicity, with good biocompatibility and drug release; real-time PCR and antibacterial test showed that the LF/GH/F film had good antibacterial activity. LF/GH/F film has a good inhibitory effect on oral pathogens, and its mechanism is related to biofilm. The antibacterial experiments of nanofiber membrane in vitro and the effect of bacterial biofilm were carried out. The effect of LF/GH/F on oral microbial flora structure was studied by fluorescence quantitative pest techniques.

Dissolution Improvement of Progesterone and Testosterone via Impregnation on Mesoporous Silica Using Supercritical Carbon Dioxide

Progesterone (PRG) and testosterone (TST) were impregnated on mesoporous silica (ExP) particles via supercritical carbon dioxide (scCO2) processing at various pressures (10–18 MPa), temperatures (308.2–328.2 K), and time (30–360 min). The impact of a co-solvent on the impregnation was also studied at the best determined pressure and temperature. The properties of the drug embedded in silica particles were analysed via gas chromatography (GC), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), and nitrogen adsorption. An impregnation of 1 to 82 mg/g for PRG and 0.1 to 16 mg/g for TST was obtained depending on the processing parameters. There was a significant effect of pressure, time, and co-solvent on the impregnation efficiency. Generally, an increase in time and pressure plus the use of co-solvent led to an improvement in drug adsorption. Conversely, a rise in temperature resulted in lower impregnation of both TST and PRG on ExP. There was a substantial increase in the dissolution rate (> 90% drug release within the first 2 min) of both TST and PRG impregnated in silica particles when compared to the unprocessed drugs. This dissolution enhancement was attributed to the amorphisation of both drugs due to their adsorption on mesoporous silica.

Graphical Abstract

High-Shear Wet Granulation of SMEDDS Based on Mesoporous Carriers for Improved Carvedilol Solubility

Mesoporous carriers are a convenient choice for the solidification of self-microemulsifying drug delivery systems (SMEDDS) designed to improve the solubility of poorly water-soluble drugs. They are known for high liquid load capacity and the ability to maintain characteristics of dry, free-flowing powders. Therefore, five different mesoporous carriers were used for the preparation of carvedilol-loaded SMEDDS granules by wet granulation methods—in paten (manually) and using a high-shear (HS) granulator. Granules with the highest SMEDDS content (63% and 66% of total granules mass, respectively) and suitable flow properties were obtained by Syloid^® 244FP and Neusilin^® US2. SMEDDS loaded granules produced by HS granulation showed superior flow characteristics compared to those obtained manually. All SMEDDS granules exhibited fast in vitro release, with 93% of carvedilol releasing from Syloid^® 244FP-based granules in 5 min. Upon compaction into self-microemulsifying tablets, suitable tablet hardness and very fast disintegration time were achieved, thus producing orodispersible tablets. The compaction slightly slowed down the carvedilol release rate; nevertheless, upon 1 h (at pH 1.2) or 4 h (at pH 6.8) of in vitro dissolution testing, the amount of released drug was comparable with granules, confirming the suitability of orodispersible tablets for the production of the SMEDDS loaded single unit oral dosage form.

Curcumin-Loaded Silica Nanoparticles: Applications in Infectious Disease and Food Industry

Curcumin has multiple properties that are used to cure different diseases such as cancer, infections, inflammatory, arthritic disease, etc. Despite having many effects, the inherent physicochemical properties-such as poor water solubility, chemical instability, low bioavailability, photodegradation, fast metabolism, and short half-life-of curcumin's derivatives have limited its medical importance. Recently, unprecedented advances in biomedical nanotechnology have led to the development of nanomaterial-based drug delivery systems in the treatment of diseases and diagnostic goals that simultaneously enhance therapeutic outcomes and avoid side effects. Mesoporous silica nanoparticles (MSNs) are promising drug delivery systems for more effective and safer treatment of several diseases, such as infections, cancers, and osteoporosis. Achieving a high drug loading in MSNs is critical to the success of this type of treatment. Their notable inherent properties-such as adjustable size and porosity, high pore volume, large surface area, functionality of versatile surfaces, as well as biocompatibility-have prompted extraordinary research on MSNs as multi-purpose delivery platforms. In this review, we focused on curcumin-loaded silica nanoparticles and their effects on the diagnosis and treatment of infections as well as their use in food packaging.

Determination of Alteration in Micromeritic Properties of a Solid Dispersion: Brunauer-Emmett-Teller Based Adsorption and Other Structured Approaches

The present study is focused on the use of solid dispersion technology to triumph over the solubility-related problems of bexarotene which is currently used for treating various types of cancer and has shown potential inhibitory action on COVID-19 main protease and human ACE2 receptors. It is based on comparison of green locust bean gum and synthetic poloxamer as polymers using extensive mechanistic methods to explore the mechanism behind solubility enhancement and to find suitable concentration of drug to polymer ratio to prepare porous 3rd generation solid dispersion. The prepared solid dispersions were characterized using different studies like X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), differential scanning calorimetry (DSC), and particle size analysis in order to determine the exact changes occurred in the product which are responsible for enhancing solubility profiles of an insoluble drug. The results showed different profiles for particle size, solubility, dissolution rate, porosity, BET, and Langmuir specific surface area of prepared solid dispersions by using different polymers. In addition to the comparison of polymers, the BET analysis deeply explored the changes occurred in all dispersions when the concentration of polymer was increased. The optimized solid dispersion prepared with MLBG using lyophilization technique showed reduced particle size of 745.7±4.4 nm, utmost solubility of 63.97%, pore size of 211.597 Å, BET and Langmuir specific surface area of 5.6413 m2/g and 8.2757 m2/g, respectively.

The Effect of Surfactant Type and Concentration on Physicochemical Properties of Carvedilol Solid Dispersions Prepared by Wet Milling Method

The present study mainly aimed to prepare solid dispersions (SDs) of a poorly water-soluble compound, carvedilol (CA), in the presence of pluronic F68 (F68) and myrj 52 by wet milling technique in order to enhance drug dissolution. The process enabled the preparation of SDs without using any toxic organic solvents. SDs with different CA: surfactant ratios were prepared by wet milling followed by freeze-drying method and evaluated for their particle size and dissolution. They were also characterized based on/using X-ray diffraction (XRD), differential scanning calorimetry (DSC), fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM), and saturated solubility. The effect of cryoprotectant type on the dissolution and particle size of SDs was also investigated. Wet milling process resulted in the reduced particle size depending on the type of surfactant. The significant drug dissolution and saturated solubility enhancement were recorded for milled SD formulations. In this regard, Myrj had a greater impact compared to F68. Dissolution efficiencies (DE₃₀) obtained for the myrj-included SDs were up to 8.2-fold higher than that of untreated CA. The type of cryoprotectant was also found to affect the drug dissolution. According to the results, partial amorphization occurred in wet-milled samples, as confirmed by XRD and DSC analysis. It was concluded that using an appropriate surfactant along with wet-milling method may have been an effective approach for improving the dissolution rate of CA, a poorly soluble compound.

Development of a gliclazide ionic liquid and its mesoporous silica particles: an effective formulation strategy to improve oral absorption properties

Ionic liquid (IL) technology provides a useful platform to enhance the oral absorption of therapeutic agents. In the present work, gliclazide (GLI), a second-generation sulfonylurea drug was transformed into an IL with tetrabutylphosphonium. The physicochemical properties of this IL were systematically characterized by DSC, TGA, FT-IR, NMR, and HPLC. For the further preparation development, a solution stability test was conducted. GLI-based IL could improve the solution stability in a neutral environment. To assess oral potential, the solubility characteristics including equilibrium solubility, 24 h kinetic saturation solubilities and supersaturation profiles were first explored. Significant enhancement of solubilities, supersaturation ratio and duration of supersaturation was found for the synthesized IL. Computational methodology was utilized to better understand the improved solubility results. From the simulated results, [TBP][GLI] showed a longer time period when the distance between cation and anion was far above the baseline and a higher deviation degree, indicating less stable ion pairs of [TBP][GLI] in an aqueous environment and it being easy for the cation and anion to tear apart and form interactions with water molecules. The prepared [TBP][GLI] exhibited intestinal transportation ability and safety as evidenced by the in vitro gastrointestinal tract artificial membrane permeability assays (GIT-PAMPA) and cytotoxicity experiments with Caco-2 cells. A mesoporous carrier, AEROPERL® 300 Pharma, was chosen to load the IL and then encapsuled into enteric capsules. The prepared oral capsules containing GLI-based IL loaded mesoporous silica particles released fast and could realize 100% release within 60 min.

Application of commercially available mesoporous silica for drug dissolution enhancement in oral drug delivery

Due to the high number of poorly water-soluble active pharmaceutical ingredients, oral drug delivery development has become challenging. One of the strategies to enhance drug solubility and to achieve high oral bioavailability is to formulate such compounds into amorphous solid dispersions. In recent years, porous materials have been investigated as possible carriers into which a drug can be adsorbed, such as mesoporous silica, in particular. Unlike the ordered mesoporous network of silica, non-ordered silica already has a "generally regarded as safe" status, and is already used as an excipient in pharmaceutical and cosmetic products. Thus, it is reasonable to expect that products that contain solid dispersions with non-ordered carriers will reach the market sooner and more easily than those with ordered mesoporous carriers. The emphasis of this review is therefore on non-ordered commercially available mesoporous silica and the progress that has been made in development of the use of these materials for improved dissolution rates in oral drug delivery. First, a thorough categorisation of the drug loading methods is presented, followed by discussion on the most important characteristics of solid dispersions (i.e., physical state, stability, drug release). Finally, manufacturability and production of a final solid dosage form are considered.

Cyclodextrin Complexation as a Way of Increasing the Aqueous Solubility and Stability of Carvedilol

We studied the effect of several CDs on carvedilol's solubility and chemical stability in various aqueous media. Our present results show that it is possible to achieve a carvedilol concentration of 5 mg/mL (12.3 mM) in the presence of 5 eq of γCD or RAMEB in an aqueous medium with an acceptable acid pH (between 3.5 and 4.7). Carvedilol formed 1:1 inclusion complexes but those with RAMEB appear to be stronger (K = 317 M-1 at 298 K) than that with γCD (K = 225 M-1 at 298 K). The complexation of carvedilol by RAMEB significantly increased the drug's photochemical stability in aqueous solution. These results might constitute a first step towards the development of a novel oral formulation of carvedilol.

Effects of Formulation and Manufacturing Process on Drug Release from Solid Self-emulsifying Drug Delivery Systems Prepared by High Shear Mixing

This study sought to investigate the influence of formulation and process factors of the high shear mixing (HSM) on the properties of solid self-emulsifying drug delivery systems (S-SEDDS) containing the model drug carvedilol (CAR). Firstly, liquid SEDDS (L-SEDDS) were prepared by mixing castor oil with different proportions of surfactant (Solutol or Kolliphor RH40) and cosolvent (Transcutol or PEG400). A miscible L-SEDDS with high drug solubility (124.3 mg/g) was selected and gave rise to 10% (m/m) CAR loaded-emulsion with reduced particle size. Then, a factorial experimental design involving five component's concentration and two process factors was used to study the solidification of the selected L-SEDDS by HSM. CAR content, diffractometric profile, and in vitro dissolution were determined. Morphological and flow analyses were also performed. Porous and spherical particles with mean sizes ranging from 160 to 210 µm were obtained. Particle size was not affected by any formulation factor studied. Powder flowability, in turn, was influenced by L-SEDDS and crospovidone concentration. CAR in vitro dissolution from S-SEDDS was significantly increased compared to the drug as supplied and was equal (pH 1.2) or lower (pH 6.8) than that determined for L-SEDDS. Colloidal silicon dioxide decreased drug dissolution, whereas an increase in water-soluble diluent lactose and L-SEDDS concentration increased CAR dissolution. The proper selection of liquid and solid constituents proved to be crucial to developing an S-SEDDS by HSM. Indeed, the results obtained here using experimental design contribute to the production of S-SEDDS using an industrially viable process.

Amorphous Form of Carvedilol Phosphate-The Case of Divergent Properties

The amorphous form of carvedilol phosphate (CVD) was obtained as a result of grinding. The identity of the obtained amorphous form was confirmed by powder X-ray diffraction (PXRD), different scanning calorimetry (DSC), and FT-IR spectroscopy. The process was optimized in order to obtain the appropriate efficiency and time. The crystalline form of CVD was used as the reference standard. Solid dispersions of crystalline and amorphous CVD forms with hydrophilic polymers (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®) were obtained. Their solubility at pH 1.2 and 6.8 was carried out, as well as their permeation through a model system of biological membranes suitable for the gastrointestinal tract (PAMPA-GIT) was established. The influence of selected polymers on CVD properties was defined for the amorphous form regarding the crystalline form of CVD. As a result of grinding (four milling cycles lasting 15 min with 5 min breaks), amorphous CVD was obtained. Its presence was confirmed by the “halo effect” on the diffraction patterns, the disappearance of the peak at 160.5 °C in the thermograms, and the changes in position/disappearance of many characteristic bands on the FT-IR spectra. As a result of changes in the CVD structure, its lower solubility at pH 1.2 and pH 6.8 was noted. While the amorphous dispersions of CVD, especially with Pluronic^® F-127, achieved better solubility than combinations of crystalline forms with excipients. Using the PAMPA-GIT model, amorphous CVD was assessed as high permeable (Papp > 1 × 10⁻⁶ cm/s), similarly with its amorphous dispersions with excipients (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®), although in their cases, the values of apparent constants permeability were decreased.

Foams as unique drug delivery systems

Foams are multiphase systems found throughout nature. We meet them equally often in our everyday life, starting with the foam in the morning espresso, where the foam should constitute 10% of the drink or in a glass of beer and ending with the evening bath with foam. These multiphase systems consist mainly of gas, which is separated by liquid or solid lamellae. The lamellae have a very large surface area and a small thickness, which results in their low stability. The foams in pharmaceutics are known for a long time as protective or therapeutic preparations for topical use. However, the physicochemical structure of both solid and liquid foams offers multiple fields of application in the modern therapy. For instance, owing to the unique structure, foams can be also used for parenteral use in the form of implants serving as a drug carrier and at the same time, a scaffold for regenerating the tissue. Foams can also be used orally in the form of controlled drug delivery systems that are potentially useful for sustained or targeted drug delivery. The article describes the unique advantages and features of foams that make them useful in modern pharmacotherapy.

The influence of moisture on the storage stability of co-amorphous systems

Co-amorphization has been utilized to improve the physical stability of the respective neat amorphous drugs. However, physical stability of co-amorphous systems is mostly investigated under dry conditions, leaving the potential influence of moisture on storage stability unclear. In this study, carvedilol-L-aspartic acid (CAR-ASP) co-amorphous systems at CAR to ASP molar ratios from 3:1 to 1:3 were investigated under non-dry conditions at two temperatures, i.e., 25 °C 55 %RH and 40 °C 55 %RH. Under these conditions, the highest physical stability of CAR-ASP systems was observed at the 1:1 M ratio. This finding differed from the optimal molar ratio previously obtained under dry conditions (CAR-ASP 1:1.5). Molecular interactions between CAR and ASP were affected by moisture, and salt disproportionation occurred during storage. Morphological differences of systems at different molar ratios could be observed already after one week of storage. Furthermore, variable temperature X-ray powder diffraction measurements showed that excess CAR or excess ASP, existing in the binary systems, resulted in a faster recrystallization compared to equimolar system. Overall, this study emphasizes the influence of moisture on co-amorphous systems during storage, and provides options to determine the optimal ratio of co-amorphous systems in presence of moisture at comparatively short storage times.

An updated review on therapeutic potential and recent advances in drug delivery of Berberine: Current status and future prospect

Natural products are well known for their high potency with minimum side effects. Plant extracts are the most commonly used natural products because of their ease of availability and relatively low production cost. Berberine (BBR), a phytochemical component of some Chinese medicinal herbs (most commonlyBerberis vulgaris), is an isoquinoline alkaloid with several biological and pharmacological effects including antioxidant, anti-inflammatory, antitumour, antimicrobial, antidepressant,hepatoprotective, hypolipidemic, and hypoglycemic actions. Interestingly, multiple studies have shown that BBR is a potential drug candidate with a multi-spectrum therapeutic application. However, the oral delivery of BBR is challenged owing to its poor bioavailability. Therefore, its oral bioavailability needs to be enhanced before it can be used in many clinical applications. This review provides an overview of the various studies that support the broad range of pharmacological activities of BBR. Also, it includes a section to address the issues and challenges related with the drug and methods to improve the properties of BBR such as solubility, stability and bioavailability that may be explored to help patients reap the maximum benefit from this potentially useful drug.

A Multivariate Approach for the Determination of the Optimal Mixing Ratio of the Non-Strong Interacting Co-Amorphous System Carvedilol-Tryptophan

Converting crystalline compounds into co-amorphous systems is an effective way to improve the solubility of poorly water-soluble drugs. It is, however, of critical importance for the physical stability of co-amorphous systems to find the optimal mixing ratio of the drug with the co-former. In this study, a novel approach for this challenge is presented, exemplified with the co-amorphous system carvedilol–tryptophan (CAR–TRP). Following X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) of the ball-milled samples to confirm their amorphous form, Fourier-transform infrared spectroscopy (FTIR) and principal component analysis (PCA) were applied to investigate intermolecular interactions. A clear deviation from a purely additive spectrum of CAR and TRP was visualized in the PCA score plot, with a maximum at around 30% drug (mol/mol). This deviation was attributed to hydrogen bonds of CAR with TRP ether groups. The sample containing 30% drug (mol/mol) was also the most stable sample during a stability test. Using the combination of FTIR with PCA is an effective approach to investigate the optimal mixing ratio of non-strong interacting co-amorphous systems.

The Impact of Surfactant Composition and Surface Charge of Niosomes on the Oral Absorption of Repaglinide as a BCS II Model Drug

Background

Niosomes, bilayer vesicles formed by the self-assembly of nonionic surfactants, are receiving increasing attention as potential oral drug delivery systems but the impact of niosomal formulation parameters on their oral capability has not been studied systematically. The aim of this study was to investigate the impact of surfactant composition and surface charge of niosomes in enhancing oral bioavailability of repaglinide (REG) as a BCS II model drug.

Methods

Niosomes (13 formulations) from various nonionic surfactants having HLB in the range of 4–28 (Tweens, Spans, Brijs, Myrj, poloxamer 188, TPGS and Labrasol) were prepared and characterized concerning their loading efficiency, hydrodynamic diameter, zeta potential, drug release profile, and stability. The oral pharmacokinetics of the selected formulations were studied in rats (8 in vivo groups).

Results

The results revealed that type of surfactant markedly affected the in vitro and in vivo potentials of niosomes. The C_max and AUC values of REG after administration of the selected niosomes as well as the drug suspension (as control) were in the order of Tween 80> TPGS> Myrj 52> Brij 35> Span 60≈Suspension. Adding stearyl amine as a positive charge-inducing agent to the Tween 80-based niosomes, resulted in an additional increase in drug absorption and values of AUC and C_max were 3.8- and 4.7-fold higher than the drug suspension, respectively.

Conclusion

Cationic Tween 80-based niosomes may represent a promising platform to develop oral delivery systems for BCS II drugs.

Impact of drying on dissolution behavior of carvedilol-loaded sustained release solid dispersion: development and characterization

PURPOSE

The present study aimed to develop carvedilol (CAR)-loaded (25% w/w) sustained release solid dispersion (SRSD), for enhanced dissolution and to explore the applicability of different industrially accessible drying techniques.

METHODS

SRSD-CAR containing different ratios of polymers were prepared and physicochemically characterized. Dissolution study was carried out in both sink and supersaturated conditions to identify the possible enhancement in dissolution behavior.

RESULTS

Based on the solubility study, Kolliphor® P188 and Eudragit® RSPO (50:25, % w/w) ratio exhibited the highest solubility among the samples and was chosen as the optimal composition of SRSD-CAR for further characterization. The crystallinity assessments of the optimized formulation indicated amorphization of CAR in the formulation, bring about improved solubility of CAR. The infrared spectroscopic study revealed minor transitions; demonstrating the absence of significant interactions between drug and carrier. Furthermore, the SRSD-CAR exhibited immediate formation of nano particles when dispersed in water. Dissolution study revealed significant improvement in dissolution behavior, with a release of CAR in a gradual manner compared to crystalline CAR. From the dissolution kinetics analysis, the Korsmeyer Peppas model fit the best and diffusion was predominant in release of CAR. The drug release pattern showed insignificant differences between the SRSD-CAR formulations prepared by rotary vacuum drying and freeze drying.

CONCLUSION

From these experimental findings, SRSD approach might be a favorable dosage option for CAR, offering improved biopharmaceutical properties.

Functionalised calcium carbonate as a coformer to stabilize amorphous drugs by mechanochemical activation

The aim of this study was to investigate the amorphization, physical stability and drug release of a model drug, carvedilol (CAR), when loaded onto functionalised calcium carbonate (FCC) using mechanochemical activation (vibrational ball milling). The solid-state characteristics and physical stability of CAR-FCC samples, prepared at different weight ratios and for different milling times, were determined using differential scanning calorimetry and X-ray powder diffraction. Upon milling CAR-FCC samples containing 50% CAR, amorphization of CAR was observed after 10 min. For CAR-FCC samples milled for either 30 or 90 min, it was found that CAR was amorphised at all ratios (10-90% CAR), but FCC remained crystalline. The glass transition temperature (T_gα) of the various CAR-FCC samples milled for 90 min was found to be similar (38 °C) for all ratios containing 20% CAR and above. The similar T_gαs for the different drug ratios indicate deposition of amorphous CAR onto the surface of FCC. For CAR-FCC samples containing 10% CAR, a T_gα of 49 °C was found, which is 11 °C higher compared with other CAR-FCC samples. This may indicate restricted molecular mobility resulting from CAR molecules that are in close contact with the FCC surface. The physical stability, under both stress (100 °C) and non-stress conditions (25 °C at dry conditions), showed that drug concentrations up to 30% CAR can be stabilized in the amorphous form for at least 19 weeks under non-stress conditions when deposited onto FCC, compared to less than a week physical stability of neat amorphous CAR. In vitro drug release showed that CAR-FCC samples containing 60% CAR and below can improve the drug release and generate supersaturated systems compared to neat amorphous and crystalline CAR. Samples with lower drug concentrations (40% CAR and below) can maintain supersaturation during 360 min of dissolution testing. This study indicates that the crystalline inorganic material, FCC, can facilitate amorphization of drugs, provide stabilization against drug crystallization, and improve dissolution properties of amorphous drugs upon mechanochemical activation.

Determination of the Optimal Molar Ratio in Amino Acid-Based Coamorphous Systems

Coamorphous drug formulations are a promising approach to improve solubility and bioavailability of poorly water-soluble drugs. On the basis of theoretical assumptions involving molecular interactions, the 1:1 molar ratio of drug and coformer is frequently used as "the optimal ratio" for a homogeneous coamorphous system (i.e., the coamorphous system with the highest physical stability and, if strong interaction is possible between two molecules, the highest glass transition temperature (T_g)). In order to more closely investigate this assumption, l-aspartic acid (ASP) and l-glutamic acid (GLU) were investigated as coformers for the basic drug carvedilol (CAR) at varying molar ratios. Salt formation between CAR with ASP or GLU was expected to occur at the molar 1:1 ratio based on their chemical structures. Interestingly, the largest deviation between the experimental T_g and the theoretical T_g based on the Gordon-Taylor equation was observed at a molar ratio of around 1:1.5 in CAR-ASP and CAR-GLU systems. In order to determine the exact value of the ratio with the highest T_g, a data fitting approach was established on thermometric data of various CAR-ASP and CAR-GLU systems. The highest T_g was found to be at CAR-ASP 1:1.46 and CAR-GLU 1:1.43 mathematically. Spectroscopic investigations and physical stability measurements further confirmed that the optimal molar ratio for obtaining a homogeneous system and the highest stability can be found at a molar ratio around 1:1.5. Overall, this study developed a novel approach to determine the optimal ratio between drug and coformers and revealed the influence of varying molar ratios on molecular interactions and physical stability in coamorphous systems.

Exploring the Potential of Mesoporous Silica as a Carrier for Puerarin: Characterization, Physical Stability, and In Vivo Pharmacokinetics

The aim of this study was to evaluate the use of a novel porous silica carrier, AEROPERL^® 300 Pharma (AP), to improve the in vitro release and oral bioavailability of puerarin (PUE) in solid dispersions (SDs). PUE-AP SD formulations with different ratios of drug to silica (RDS) were prepared by the solvent method. The scanning electron microscopy (SEM) results indicated that the dispersion of PUE improved as the concentration of AP was increased. The differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results revealed that PUE mostly existed in an amorphous state in the SDs. The rate of drug dissolution from the SDs was significantly higher than that from the PUE powder (p < 0.05). The in vitro drug release percentage from the PUE-AP SDs increased as the RDS was reduced. The oral bioavailability of PUE from the SDs improved when using AP, as indicated by AUC_(0-∞), which was 2.05 and 2.01 times greater than that of the PUE (API) and PVP K30 SDs, respectively (p < 0.05). The drug content, in vitro release profiles, and the amorphous state of PUE in the PUE-AP SDs showed no significant changes after being stored at room temperature for 6 months or under accelerated conditions (40 ± 2°C, 75 ± 5% relative humidity) for 3 months. AP has a high pore volume, large specific surface area, excellent flowability, and hydrophilic properties, making it capable of improving the dissolution and bioavailability of poorly water-soluble drugs.

Preparation and physicochemical characterization of binary and ternary ground mixtures of carvedilol with PVP and SLS aimed to improve the drug dissolution

The objective of the present study was to enhance the dissolution rate of carvedilol (CA), a poorly water-soluble antihypertensive drug, using a co-grinding method in the presence of polyvinylpyrrolidone (PVP) and sodium lauryl sulfate (SLS). Various ratios of CA:PVP:SLS were ground by a planetary ball mill. They were studied in terms of dissolution, solubility, and particle size. The solid state and morphology of the intact drug and prepared samples were also characterized using differential scanning calorimetry (DSC), infrared spectroscopy (IR), X-ray diffraction (XRD), and scanning electron microscope (SEM). According to the results, co-grinding in the presence of PVP and SLS significantly increased CA dissolution rate. DE₆₀ (dissolution efficiency) obtained for the best ternary ground mixture (89.31%) was 3.4 and 4.5 times higher than that of the related physical mixture (PM) and the intact drug, respectively. Further, the solubility of this formulation was about 10 times higher compared to that of the intact CA. A direct correlation was also observed between the chamber rotation speed of the planetary mill within the range of 100-400 rpm and CA dissolution rate. Finally, DSC, IR, and XRD analysis ruled out any polymorphic changes and chemical interactions during the grinding process.

Development and Characterization of Microstructured, Spray-Dried Co-Amorphous Mixture of Antidiabetic Agents Stabilized by Silicate

In the present work, co-amorphous mixture (COAM) of poorly soluble nateglinide (NT) and highly soluble Metformin hydrochloride (MT) was prepared by spray drying method to improve the dissolution rate of NT and the processability of COAM. Binary spray-dried COAM of NT and MT (120 mg: 500 mg) was prepared in its clinical dose ratio whereas 20% Neusilin®US2 (NS) was added to prepare non-sticky, free flowing ternary COAM. Solubility studies of binary and ternary COAM exhibited sevenfold and tenfold rise in the solubility of NT. Complete amorphization of NT was revealed in XRPD and DSC studies of both COAM and hydrogen-bonding interactions were reflected in FTIR-spectra. SEM microphotographs illustrated round-shaped microparticles in ternary COAM against the irregular particles in binary COAM. In vitro dissolution of NT was significantly improved in ternary COAM > binary COAM > NT irrespective of dissolution medium. On contrary, MT has partially transformed to the amorphous form in COAM without altering the solubility. In accelerated stability studies, NT and MT devitrification was not observed in XRPD of ternary COAM in contrast to binary COAM. Therefore, enhanced dissolution of NT, stabilization of spray-dried dispersion, and its improved processability can be achieved by preparing ternary COAM of NT:MT:NS.

Preparation, optimisation, and in vitro-in vivo evaluation of febuxostat ternary solid dispersion

The research aimed to prepare febuxostat (FEB) solid dispersion through solvent evaporation. Optimised solid dispersion composed of FEB, polyvinylpyrrolidone (PVP K30) and poloxamer at a ratio of 1:3:3 was characterised. Powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC) indicated FEB was transformed from crystalline into the amorphous state in solid dispersion and scanning electron microscopy (SEM) revealed the morphology. Fourier transform infrared spectroscopy (FT-IR) suggested the interactions formed between FEB and polymers. A remarkable increase was observed of the optimised formulation in saturation solubility, dissolution studies (96.17 ± 0.79% in pH 6.0), and bioavailability (C_max 18.25 ± 2.44 vs. 7.72 ± 0.48 μg/mL and AUC_0-∞ 53.62 ± 7.63 vs. 34.76 ± 2.45 μg·h/mL). Besides, the FEB solid dispersion showed great stability after 90 days storage. Thus, the present study supports the rationality of PVP K30 and poloxamer188 as co-carriers for the preparation of FEB solid dispersion.

Whey proteins as stabilizers in amorphous solid dispersions

Whey proteins are extensively used as nutritional supplements but have so far not been investigated as co-formers for amorphous solid dispersions (ASD) to enhance the solubility and dissolution rate of poorly water soluble drugs. In this study, whey protein isolate (WPI) and whey protein hydrolysate (WPH) were each mixed with three poorly water soluble drugs (indomethacin: IND, carvedilol: CAR and furosemide: FUR) and prepared as ASDs at 50% (w/w) drug loading using vibrational ball milling. Subsequently, solid state characteristics, dissolution rate and physical stability of the obtained samples were analyzed. All ASDs showed a significant increase in their glass transition temperatures, as well as faster dissolution rates and higher apparent solubilities compared to both the respective pure crystalline and amorphous drugs. The saturation solubility of the drugs was increased in the presence of the whey proteins, and the investigated ASDs showed supersaturation by attaining higher drug concentrations compared to the respective saturation solubilities. Upon storage, ASDs containing IND were found to be physically stable for at least 27 months, whereas, ASDs containing CAR or FUR were stable for about 8 months and 17 months, respectively. This was a tremendous increase in physical stability compared to the pure amorphous drugs which recrystallized within less than one week. Overall, WPI and WPH proved to be promising co-formers and amorphous stabilizers in ASD formulations.

Solid Form of Lipid-Based Self-Nanoemulsifying Drug Delivery Systems for Minimization of Diacerein Adverse Effects: Development and Bioequivalence Evaluation in Albino Rabbits

This work aimed to enhance the oral bioavailability of diacerein. The drug was incorporated in self-nanoemulsifying drug delivery system. Ternary phase diagrams were constructed using Capryol™90, Miglyol®812 and isopropyl myristate as oils, Tween®80 and Tween®20 as surfactants and PEG 200 and PEG 300 as co-surfactants. Among a total of 432 formulae, 17 formulae were clear. They were assessed for mean droplet size, polydispersity index (PDI), saturation solubility and transmission electron microscopy. Solid granules were obtained by adsorption on Aeroperl®300. Results for DSC, PXRD, and SEM of prepared granules revealed that diacerein was molecularly dispersed within the formula. Desirability factor was adopted to find the granules with maximum solubility, maximum dissolution efficiency, maximum dissolution rate and percentage of drug dissolved at 5 min and minimum dissolution time and Carr's index. The optimized formula consisted of 10% Miglyol®812, 70% Tween®80 and 20% PEG 200 adsorbed to Aeroperl® 300 with a ratio of 2:1 preconcentrate:carrier. It recorded a 3.77-fold increase in bioavailability, compared to the marketed product. Such enhancement means lower doses and less gastrointestinal side effects.

Influence of preparation technique on co-amorphization of carvedilol with acidic amino acids

Basic amino acids (AAs) have successfully been used as co-formers with acidic drugs for the preparation of co-amorphous formulations using ball-milling (BM) and spray-drying (SD). In contrast, acidic AAs have been reported as poor co-formers for co-amorphous formulations, even for basic drugs, when using BM as a preparation technique. In this study the basic drug carvedilol (CAR) and the two acidic AAs, glutamic acid and aspartic acid, were used to explore the possibilities of producing co-amorphous formulations using BM, SD and liquid assisted grinding (LAG). X-ray powder diffraction, thermal analysis and Fourier-transform infrared spectroscopy were used to determine the solid state form of the various CAR-AA mixtures prepared. BM the CAR-AA mixtures for 60 min did not result in co-amorphization as XRPD revealed remaining crystallinity of both CAR and the AA. On the other hand, successful co-amorphous salt formation was obtained for all SD samples. Differential scanning calorimetry showed that all the SD CAR-AA mixtures had a single glass transition temperature of approximately 80 °C. The CAR-AA mixtures prepared by LAG showed some polymorphic conversion of CAR. Intrinsic dissolution testing showed the highest dissolution rate for all SD mixtures due to co-amorphous salt formation. Hence it was observed that of the three preparation techniques used, successful co-amorphous formulations of a basic drug with an acidic AA could only be prepared by SD.