Rhamnose-PEG-induced supramolecular helices: Addressing challenges of drug solubility and release efficiency in transdermal patch

Transdermal drug delivery systems (TDDS) demand both high drug loading capacity and efficient delivery. In order to improve both simultaneously, this study aims to develop a novel rhamnose-induced pressure-sensitive adhesive (HPR) by dispersing the drug in the supramolecular helical structure. Ten model drugs, categorized as acidic and basic compounds, were chosen to understand the characteristics of the HPR and its inner mechanism. Notably, it enhanced drug loading by 1.41 to 5 times over commercially available pressure-sensitive adhesives Duro-Tak@ 87-4098 and Duro-Tak@ 87-2287, in addition to increasing drug release efficiency by a factor of about 5. Pharmacokinetic evaluation demonstrated that the HPR group had >4-fold (Tulobuterol TUL) and 3-fold (Diclofenac DIC) more area under the blood drug concentration curve (AUC) than the commercial TUL and DIC patches in the absence of added excipients and a significantly prolonged mean residence time (MRT) of >4-fold (TUL) and 3-fold (DIC), demonstrating the potential for highly efficacious and prolonged dosing. Furthermore, its safety and mechanical properties meet the requisite standards. Mechanistic inquiries unveiled that both acidic and basic drugs establish hydrogen bonds with HPR and become encapsulated within supramolecular helical structures. The supramolecular helical structures, significantly elevated both the enthalpy of the drug-HPR and entropy of the drugs release, thereby substantially enhancing drug delivery efficiency. In summary, HPR enabled a significant simultaneous enhancement of drug loading and drug delivery, which, together with its unique spatial structure, would contribute to the development of TDDS. In addition, the establishment of rhamnose-induced supramolecular helical structures would provide innovative pathways for different drug delivery systems.

Digestion is a critical element for absorption of cinnarizine from supersaturated lipid-based type I formulations

Enabling formulations, such as lipid-based formulations (LBFs), are means to deliver challenging-to-formulate, poorly soluble drugs. LBFs may be composed of lipids, surfactants and/or cosolvents and can be classified depending on the proportions of the components and the hydrophilicity of the surfactant according to the Lipid Formulations Classification System, ranging from type I (very lipophilic) to type IV (hydrophilic). In cases where drug solubility in LBFs does not suffice, e.g. for preclinical toxicity studies, supersaturated LBFs can be used in order to increase the drug load. However, the effect of digestion on drug absorption from supersaturated type I formulations (consisting exclusively of lipids) still remains relatively unexplored and unclear. In the present study, the impact of lipid digestion on absorption of cinnarizine-loaded supersaturated lipid-based formulations of type I was investigated in rats by pre-dosing of the lipase inhibitor orlistat. The lipid chain length and the drug dose were varied by testing medium-chain triglycerides (MCT) and long-chain triglycerides (LCT), both supersaturated and non-supersaturated. Due to the physical instability of supersaturated formulations of cinnarizine, i.e. a potential of precipitation of cinnarizine, the impact of the addition of the amphiphilic polymer Soluplus®, as a potential precipitation inhibitor, was also investigated. The supersaturated systems resulted in a 2.3 - 3.3-fold higher Area Under the Curve (AUC0-24 h, not dose-normalized) and 1.4 - 2.2-fold higher maximum plasma concentration (Cmax, not dose-normalized) than non-supersaturated formulations (statistically significant with p = 0.05), whereas the addition of Soluplus® did not reveal any benefit. Results indicated that lipase inhibition affected the in vivo performance of LBFs: Co-administration of the lipase inhibitor significantly reduced Cmax and AUC0-24 h (both to 33-39 %, not dose-normalized) for the LCT formulations and, though not significant, a similar trend was observed for the AUC0-24 h of the MCT formulations (to 53-87 %), suggesting a higher dependency on lipolysis for LCT. Also, tmax tended to decrease to 20-60 % when compared to the animals not dosed with orlistat but lacking statistical significance. Without lipase inhibition, the LCT in general lead to better absorption of cinnarizine as compared to MCT, with 1.2-1.7-fold higher AUC0-24 h and 1.4-1.8-fold higher Cmax, but without showing statistical significance. Overall, the study revealed that lipolysis plays a major role in drug absorption from supersaturated lipid-based formulations type I.

Overview and thermodynamic modelling of deep eutectic solvents as co-solvents to enhance drug solubilities in water

The poor water solubility of active pharmaceutical ingredients (APIs) is a major challenge in the pharmaceutical industry. Co-solvents are sometimes added to enhance drug dissolution. A novel group of co-solvents, the Deep Eutectic Solvents (DES), have gained interest in the pharmaceutical field due to their good solvent power, biodegradability, sustainability, non-toxicity, and low cost. In this study, we first provide an overview of all the literature solubility studies involving a drug or API + water + DES, which can be a valuable list to some researchers. Then, we analyze these systems with focus on each individual drug/API and provide statistical information on each. A similar analysis is carried out with focus on the individual DESs. An investigation of the numeric values of the water-solubility enhancement by the different DESs for various drugs indicates that DESs are indeed effective co-solvents, with varying degrees of solubility enhancement, even up to 15-fold. This is strongly encouraging, indicating the need for further studies to find the most promising DESs for solubility enhancement. However, time-consuming and costly trial and error should be prevented by first screening, using theoretical-based or thermodynamic-based models. Based on this conclusion, the second part of the study is concerned with investigating and suggesting accurate thermodynamic approaches to tackle the phase equilibrium modeling of such systems. For this purpose, a large data bank was collected, consisting of 2009 solubility data of 25 different drugs/APIs mixed with water and 31 different DESs as co-solvents at various DES concentrations, over wide ranges of temperatures at atmospheric pressure. This data bank includes 107 DES + water + drug/API systems in total. The solubility data were then modeled according to the solid-liquid equilibrium framework, using the local composition activity coefficient models of NRTL, and UNIQUAC. The results showed acceptable behavior with respect to the experimental values and trends for all of the investigated systems, with AARD% values of 9.65 % and 14.08 % for the NRTL and UNIQUAC models, respectively. In general, the lower errors of NRTL, as well as its simpler calculation process and the requirement of fewer component parameters, suggest the priority of NRTL over UNIQUAC for use in this field.

Selective COX-2 inhibitors after bariatric surgery: Celecoxib, etoricoxib and etodolac post-bariatric solubility/dissolution and pharmacokinetics

Anatomical/physiological gastrointestinal changes after bariatric surgery may influence the fate of orally administered drugs.Since non-selective NSAIDs are not well-tolerated post-surgery, selective cyclooxygenase-2 (COX-2) inhibitors may be important for these patients. In this work we investigated celecoxib, etoricoxib and etodolac, for impaired post-bariatric solubility/dissolution and absorption. Solubility was studied in-vitro, and ex-vivoin aspirated gastric contents from patients pre- vs. post-surgery. Dissolution was studied in conditions simulating pre- vs. post-surgery stomach. Finally, the experimental solubility data were used in physiologically-based biopharmaceutics model (PBBM) (GastroPlus®) to simulate pre- vs. post-surgery celecoxib/etoricoxib/etodolac pharmacokinetic (PK) profiles.For etoricoxib and etodolac (but not celecoxib), pH-dependent solubility was demonstrated: etoricoxib solubility decreased ∼1000-fold, and etodolac solubility increased 120-fold, as pH increased from 1 to 7, which was also confirmed ex-vivo. Hampered etoricoxib dissolution and improved etodolac dissolution post-surgery was revealed. Tablet crushing, clinically recommended after surgery, failed to improve post-bariatric dissolution. PBBM simulations revealed significantly impaired etoricoxib absorption post-surgery across all conditions; for instance, 79% lower Cmax and 53% decreased AUC was simulated post-gastric bypass procedure, after single 120 mg dose. Celecoxib and etodolac maintained unaffected absorption after bariatric surgery.This mechanistically-based analysis suggests to prefer the acidic drug etodolac or the neutral celecoxib as selective COX-2 inhibitors, over the basic drug etoricoxib, after bariatric surgery.

Comparative assessment of solubility enhancement of itroconazole by solid dispersion and co-crystallization technique: Investigation of simultaneous effect of media composition on drug dissolution

Solubility of the drug is an important property of the drug as it affects the release, absorption, dissolution rate and ultimately bioavailability of the drug. Hence, the poorly aqueous soluble drug, need to be processed, to enhance its solubility and dissolution. The Biopharmaceutical System of Classification (BCS) II drugs are poorly soluble and have high permeability. Though their good ability to permeate through the membrane make them clinically useful but the problem associated with the solubility restrict their clinical use. Therefore, there is need to improve the solubility of such drug molecules to get effective pharmacological action. Itraconazole (ITZ) is an antifungal agent used in the treatment of fungal infections having poor aqueous solubility as belonging to BCS class II. The present study was aim to enhance the solubility of ITZ by solid dispersion and co-crystallization techniques. Investigation of simultaneous effect of media composition on drug dissolution was also the objective of this work. The ITZ-SD and ITZ-CCs were prepared from ITZ and other excipients like PEG 4000, oxalic acid, fumaric and malic acid by solvent evaporation, kneading technique, slurry conversion and solvent drop grinding methods. The prepared ITZ-SD, ITZ-OA-CCs, ITZ-FA-CCs and ITZ-MA-CCs were evaluated for FTIR, DSC, PXRD, % yield, micromeritic properties. The optimized ITZ-SD and ITZ-CCs were used to compress a tablet and subject to post-compression parameters. The results of FTIR and DSC showed the absence of interaction between the drug and excipients. The PXRD pattern demonstrated the formation of crystalline structures with 6 folds increased in solubility during saturation solubility analysis. In vitro dissolution was carried out in dissolution media with different pH which shows the maximum release from ITZ-SD and ITZ-CCs in pH 6.8. This also revealed the highly pH dependent solubility and dissolution behavior of the weakly basic BCS class II drug (ITZ) with pKa value of 3.7. The overall results in this study indicated the potential of solid dispersion and co-crystals for enhancement of solubility of the poorly water-soluble drugs.

Characterization of neonatal and infant enterostomy fluids - Part II: Drug solubility

Previous research revealed marked differences in the composition of intestinal fluids between infants and adults. To explore the impact on the solubilization of orally administered drugs, the present study assessed the solubility of five poorly water-soluble, lipophilic drugs in intestinal fluid pools from 19 infant enterostomy patients (infant HIF). For some but not all drugs, the average solubilizing capacity of infant HIF was similar to that of HIF obtained from adults (adult HIF) in fed conditions. Commonly used fed state simulated intestinal fluids (FeSSIF(-V2)) predicted fairly well drug solubility in the aqueous fraction of infant HIF, but did not account for the substantial solubilization by the lipid phase of infant HIF. Despite similarities in the average solubilities of some drugs in infant HIF and adult HIF or SIF, the underlying solubilization mechanisms likely differ, considering important compositional differences (e.g., low bile salt levels). Finally, the huge variability in composition of infant HIF pools resulted in a highly variable solubilizing capacity, potentially causing variations in drug bioavailability. The current study warrants future research focusing on (i) understanding the mechanisms underlying drug solubilization in infant HIF and (ii) evaluating the sensitivity of oral drug products to interpatient variations in drug solubilization.

Cellulose derivatives and natural gums as gelling agents for preparation of emulgel-based dosage forms: A brief review

Incorporation of an emulsion onto a gel base develops a drug delivery system with improved characteristics, known as emulgel, that can envelop both hydrophilic and lipophilic molecules, and therefore increase stability and penetration of topical formulations. Such a drug delivery system provides controlled drug release that has more patient compliance and higher therapeutic efficacy. Emulgel is prepared in three main stages, preparation of water-in-oil or oil-in-water emulsion, providing the gel base, and incorporation of prepared emulsion onto gel base with continuous stirring. Various materials such as different oils (e.g. sesame oil, balsam oil, and mineral oil), emulsifiers (e.g. Tween® and Span® as the non-ionic surfactant, polyvinyl alcohol), and gelling agents including cellulose derivatives such as hydroxypropyl methylcellulose (HPMC), hydroxyethylcellulose (HEC) and carboxymethyl cellulose (CMC) in different concentrations are used in emulgel preparation. The physical properties, particle size distribution, spreadability, permeation, and drug release rate are evaluated in their development and characterization. They are used in skin disorders and other diseases such as chronic anal fisher. Also, anti-acne, analgesic, and anti-inflammatory drugs have been formulated as emulgel delivery system and their effects have been studied. In this article, the subject is to review the characteristics, preparation methods, and therapeutic efficacy as well as the potential clinical use of emulgels.

Tranilast-matrine co-amorphous system: Strong intermolecular interactions, improved solubility, and physiochemical stability

There is a great interest to develop co-amorphous drug delivery systems to enhance the solubility of biopharmaceutics classification system (BCS) class II and IV drugs. However, most reported systems only resulted in severalfold solubility improvement. Tranilast (TRA) is an anti-allergic drug used to treat bronchial asthma and allergic rhinitis. It is a BCS class II drug and its poor aqueous solubility affects its absorption in vivo. To address this issue, a natural alkaloid matrine (MAR) with interesting biological activities was chosen to form a co-amorphous system with TRA, based on the solubility parameter and phase solubility experiment. The TRA-MAR drug-drug co-amorphous system was prepared by the solvent evaporation method, and further characterized by powder X-ray diffraction and modulated temperature differential scanning calorimetry. Fourier transform infrared spectroscopy, FT-Raman, and X-ray photoelectron spectroscopy revealed the formation of salt and the presence of strong intermolecular interactions in the TRA-MAR co-amorphous system, which are also supported by molecular dynamics simulations, showing ionic and hydrogen bonding interactions. This co-amorphous system exhibited excellent physical stability at both 25 °C and 40 °C under anhydrous silica gel condition. Finally, co-amorphous TRA-MAR showed greatly enhanced solubility (greater than 100-fold) and rapid release behavior in the vitro release experiments. NMR spectroscopy revealed the strong intermolecular interactions between TRA and MAR in both DMSO‑d₆ and D₂O. Our study resulted in a TRA-MAR co-amorphous drug system with significant solubility improvement and showcased the great potential to improve the dissolution behaviors of BCS class II and IV drugs through the co-amorphization approach.

Enhanced topical corticosteroids delivery to the eye: A trade-off in strategy choice

Topical corticosteroids are the primary treatment of ocular inflammation caused by surgery, injury, or other conditions. Drug pre-corneal residence time, drug water solubility, and drug corneal permeability coefficient are the major factors that determine the ocular drug bioavailability after topical administration. Although growing research successfully enhanced local delivery of corticosteroids utilizing various strategies, rational and dynamic approaches to strategy selection are still lacking. Within this review, an overview of the various strategies as well as their performance in retention, solubility, and permeability coefficient of corticosteroids are provided. On this basis, the tradeoff of strategy selection is discussed, which may shed light on the rational choice and application of ophthalmic delivery enhancement strategies.

Loading drugs into liposomes by temperature up-down cycle procedure with controllable results fitting prediction by mathematical and thermodynamic process

Liposomes are a useful carrier for delivering drugs but rarely make a poorly water-soluble drug (PWSD) realize its therapeutic potential. A key barrier lies in that, by conventional methods, PWSD is mainly loaded just in liposome bilayer membranes, which rarely provide sufficient room to accommodate drugs satisfying clinical therapy. In this investigation, a novel procedure of temperature up-down cycle (TUDC) was developed for loading PWSDs into the liposome interiors instead of bilayer membranes to hold enough agents. In particular, the TUDC procedure renders PWSDs such as curcumin (Cur) entrapment purposely controllable, as evidenced by the encapsulation efficiency (EE) of Cur varies nearly from 0% to 100% in response to changes the determinant factors of the procedure. In addition, several mathematical equations that could calculate the loading efficiency by TUDC were established and proved, when combined with thermodynamic process, able to successfully predict the loading results through including thermodynamic parameters, such as temperature and deduced drug solubility, thus remarkably cutting down the laborious experiments and enhancing liposome development efficiency. Cryo-TEM, SAXS, XRD and DSC tests proved that TUDC is feasible to load a PWSD into PEG-liposomes but rendering the drug in the amorphous state. Thus, the novel TUDC procedure and the established mathematical and thermodynamic process may provide a useful tool to promote the development of liposome products.

Fasted and fed state human duodenal fluids: Characterization, drug solubility, and comparison to simulated fluids and with human bioavailability

Accurate in vivo predictions of intestinal absorption of low solubility drugs require knowing their solubility in physiologically relevant dissolution media. Aspirated human intestinal fluids (HIF) are the gold standard, followed by simulated intestinal HIF in the fasted and fed state (FaSSIF/FeSSIF). However, current HIF characterization data vary, and there is also some controversy regarding the accuracy of FaSSIF and FeSSIF for predicting drug solubility in HIF. This study aimed at characterizing fasted and fed state duodenal HIF from 16 human volunteers with respect to pH, buffer capacity, osmolarity, surface tension, as well as protein, phospholipid, and bile salt content. The fasted and fed state HIF samples were further used to investigate the equilibrium solubility of 17 representative low-solubility small-molecule drugs, six of which were confidential industry compounds and 11 were known and characterized regarding chemical diversity. These solubility values were then compared to reported solubility values in fasted and fed state HIF, FaSSIF and FeSSIF, as well as with their human bioavailability for both states. The HIF compositions corresponded well to previously reported values and current FaSSIF and FeSSIF compositions. The drug solubility values in HIF (both fasted and fed states) were also well in line with reported solubility data for HIF, as well as simulated FaSSIF and FeSSIF. This indicates that the in vivo conditions in the proximal small intestine are well represented by simulated intestinal fluids in both composition and drug equilibrium solubility. However, increased drug solubility in the fed vs. fasted states in HIF did not correlate with the human bioavailability changes of the same drugs following oral administration in either state.

Biopharmaceutical characterization of rebamipide: The role of mucus binding in regional-dependent intestinal permeability

In this study, we aimed to elucidate biopharmaceutical characteristics of the anti-ulcer drug rebamipide, with special emphasis on the influence of gastrointestinal (GI) mucus on rebamipide segmental-dependent permeability and absorption. Experimental studies and physiologically-based pharmacokinetic (GastroPlus^TM) simulations were used to elucidate segmental-dependent absorption and pharmacokinetic (PK) profile, accounting for various drug properties, including solubility/dissolution limitations, regional-dependent drug affinity to mucus and membrane permeability, as well as physiological factors such as regional-pH differences along the intestine, thickness and types of mucus, transit time and surface areas. Low permeability and extensive binding to GI mucus were the key modeling features, and accounting for these resulted in good fitting between the predicted and in-vivo PK profiles, validating the ability of the model to pinpoint the underlying mechanisms of rebamipide limited oral bioavailability. Furthermore, the simulations indicated regional-dependent intestinal permeability of rebamipide, with absorption rank order of jejunum>ileum>duodenum>colon, mainly attributable to segmental mucus differences. Food effect simulations indicated somewhat decreased rebamipide absorption in the fed state, in corroboration with previous reports. Since this anti-ulcer drug is currently examined for additional indications, this work provides important input for future development of rebamipide.

Design and evaluation of self-nanoemulsifying drug delivery systems (SNEDDSs) for senicapoc

Senicapoc (SEN), a potent antisickling agent, shows poor water solubility and poor oral bioavailability. To improve the solubility and cell permeation of SEN, self-nanoemulsifying drug delivery systems (SNEDDSs) were developed. Capryol PGMC®, which showed the highest solubilization capacity, was selected as the oil. The self-emulsification ability of two surfactants, viz., Cremophor-EL® and Tween® 80, was compared. Based on a solubility study and ternary phase diagrams, three optimized nanoemulsions with droplet sizes less than 200 nm were prepared. An in vitro dissolution study demonstrated the superior performance of the SNEDDS over the free drug. During in vitro lipolysis, 80% of SEN loaded in the SNEDDS remained solubilized. An in vitro cytotoxicity study using the Caco-2 cell line indicated the safety of the formulations at 1 mg/mL. The transport of SEN-SNEDDSs across Caco-2 monolayers was enhanced 115-fold (p < 0.01) compared to that of the free drug. According to these results, SNEDDS formulations could be promising tools for the oral delivery of SEN.

The influence of ethanol on superdisintegrants and on tablets disintegration

Disintegration of immediate release tablets originates from the volume expansion of disintegrants within the formulation. Here, we study the impact of ethanol on the disintegrant expansion and on tablets disintegration. The three most commonly used superdisintegrants, namely sodium starch glycolate (SSG), crospovidone (PVPP) and croscarmellose sodium (CCS) were investigated alone and incorporated in dicalcium phosphate and in drug-containing tablets. High (i.e. 40%), but not moderate (i.e. 10%), aqueous ethanol concentrations reduce the size expansion of the three disintegrants compared to water. This "ethanol effect" is the greatest for SSG, followed by CCS and then PVPP. Moreover, the presence of ethanol in the media can significantly influence the disintegration time of drug-containing tablets via affecting both the disintegrant action itself and the drug solubility. For example, the disintegration time of theophylline tablets containing SSG is 8.1-fold greater in 40% aqueous ethanol compared to water. Overall, this study brought to light the existence of a potentially significant interference of alcohol with the disintegration phenomenon, suggesting that the concomitant administration of tablets and intake of alcoholic beverages may affect, in some cases, tablets disintegration. More studies are now needed to verify the importance of the "ethanol effect" on disintegration of commercial dosage forms. Our findings also suggest that PVPP is the disintegrant that is the least affected by alcohol.

Enhanced drug loading efficiency of contact lenses via salt-induced modulation

Low drug loading efficiency is one of the main obstacles hindering the application of contact lenses (CLs) as the carrier for extended ocular drug delivery. Here in this study, a simple and effective drug loading method based on salt induced modulation was proposed and demonstrated with mechanism elucidation. First of all, using poly (2-hydroxyethyl methacrylate) (p-HEMA) as the contact lens material, betaxolol hydrochloride, Diclofenac Sodium and Betaxolol Base as the model drugs with different solubility, influence of salt concentration, salt type (sodium salts of sulfate, chloride, and sulfocyanate) and drug properties in the loading solution on drug loading efficiency was investigated. Mechanism of enhanced drug loading in contact lens was further explored via studying the influence of salt on the absorption isotherm, drug solubility and water content of CLs. Applicability of this method to other CLs materials was also investigated. It was demonstrated that adjusting the ionic strength of loading solutions resulted in significant increase of drug loading in CLs. Type and concentration of the salts and solubility of the drug were the main factors influencing enhancement ratio of drug loading. The mechanism for improved drug loading was related to the reduced drug solubility in loading solutions and the reduced bound water content in contact lenses. Modulation of drug loading by adjusting ionic strength was also applicable to other CLs and the light transmittance was not affected. This method was more suitable for salt-form drugs with high solubility. In summary, adjusting ionic strength of loading solution is an economical and effective way to improve drug loading in CLs, and this simple method may also find application in other hydrogel based drug delivery systems.

Evaluation of the drug solubility and rush ageing on drug release performance of various model drugs from the modified release polyethylene oxide matrix tablets

Hydrophilic matrix systems are currently some of the most widely used drug delivery systems for controlled-release oral dosage forms. Amongst a variety of polymers, polyethylene oxide (PEO) is considered an important material used in pharmaceutical formulations. As PEO is sensitive to thermal oxidation, it is susceptible to free radical oxidative attack. The aim of this study was to investigate the stability of PEO based formulations containing different model drugs with different water solubility, namely propranolol HCl, theophylline and zonisamide. Both polyox matrices 750 and 303 grade were used as model carriers for the manufacture of tablets stored at 40 °C. The results of the present study suggest that the drug release from the matrix was affected by the length of storage conditions, solubility of drugs and the molecular weight of the polymers. Generally, increased drug release rates were prevalent in soluble drug formulations (propranolol) when stored at the elevated temperature (40 °C). In contrast, it was not observed with semi soluble (theophylline) and poorly soluble (zonisamide) drugs especially when formulated with PEO 303 polymer. This indicates that the main parameters controlling the drug release from fresh polyox matrices are the solubility of the drug in the dissolution medium and the molecular weight of the polymer. DSC traces indicated that that there was a big difference in the enthalpy and melting points of fresh and aged PEO samples containing propranolol, whereas the melting point of the aged polyox samples containing theophylline and zonisamide was unaffected.

Graphical abstract

A comparison between pure active pharmaceutical ingredients and therapeutic deep eutectic solvents: Solubility and permeability studies

THEDES, so called therapeutic deep eutectic solvents are here defined as a mixture of two components, which at a particular molar composition become liquid at room temperature and in which one of them is an active pharmaceutical ingredient (API). In this work, THEDES based on menthol complexed with three different APIs, ibuprofen (ibu), BA (BA) and phenylacetic acid (PA), were prepared. The interactions between the components that constitute the THEDES were studied by NMR, confirming that the eutectic system is formed by H-bonds between menthol and the API. The mobility of the THEDES components was studied by PFGSE NMR spectroscopy. It was determined that the self-diffusion of the species followed the same behavior as observed previously for ionic liquids, in which the components migrate via jumping between voids in the suprastructure created by punctual thermal fluctuations. The solubility and permeability of the systems in an isotonic solution was evaluated and a comparison with the pure APIs was established through diffusion and permeability studies carried out in a Franz cell. The solubility of the APIs when in the THEDES system can be improved up to 12 fold, namely for the system containing ibu. Furthermore, for this system the permeability was calculated to be 14×10^-5cm/s representing a 3 fold increase in comparison with the pure API. With the exception of the systems containing PA an increase in the solubility, coupled with an increase in permeability was observed. In this work, we hence demonstrate the efficiency of THEDES as a new formulation for the enhancement of the bioavailability of APIs by changing the physical state of the molecules from a solid dosage to a liquid system.

The solubility-permeability interplay and oral drug formulation design: Two heads are better than one

Poor aqueous solubility is a major challenge in today's biopharmaceutics. While solubility-enabling formulations can significantly increase the apparent solubility of the drug, the concomitant effect on the drug's apparent permeability has been largely overlooked. The mathematical equation to describe the membrane permeability of a drug comprises the membrane/aqueous partition coefficient, which in turn is dependent on the drug's apparent solubility in the GI milieu, suggesting that the solubility and the permeability are closely related, exhibit a certain interplay between them, and treating the one irrespectively of the other may be insufficient. In this article, an overview of this solubility-permeability interplay is provided, and the available data is analyzed in the context of the effort to maximize the overall drug exposure. Overall, depending on the type of solubility-permeability interplay, the permeability may decrease, remain unchanged, and even increase, in a way that may critically affect the formulation capability to improve the overall absorption. Therefore, an intelligent design of solubility-enabling formulation needs to consider both the solubility afforded by the formulation and the permeability in the new luminal environment resulting from the formulation.

Dissolution enhancement of active pharmaceutical ingredients by therapeutic deep eutectic systems

A therapeutic deep eutectic system (THEDES) is here defined as a deep eutectic solvent (DES) having an active pharmaceutical ingredient (API) as one of the components. In this work, THEDESs are proposed as enhanced transporters and delivery vehicles for bioactive molecules. THEDESs based on choline chloride (ChCl) or menthol conjugated with three different APIs, namely acetylsalicylic acid (AA), benzoic acid (BA) and phenylacetic acid (PA), were synthesized and characterized for thermal behaviour, structural features, dissolution rate and antibacterial activity. Differential scanning calorimetry and polarized optical microscopy showed that ChCl:PA (1:1), ChCl:AA (1:1), menthol:AA (3:1), menthol:BA (3:1), menthol:PA (2:1) and menthol:PA (3:1) were liquid at room temperature. Dissolution studies in PBS led to increased dissolution rates for the APIs when in the form of THEDES, compared to the API alone. The increase in dissolution rate was particularly noticeable for menthol-based THEDES. Antibacterial activity was assessed using both Gram-positive and Gram-negative model organisms. The results show that all the THEDESs retain the antibacterial activity of the API. Overall, our results highlight the great potential of THEDES as dissolution enhancers in the development of novel and more effective drug delivery systems.

NaCl-triggered self-assembly of hydrophilic poloxamine block copolymers

Tetronic 1307 (T1307) is a hydrophilic poloxamine (HLB>24) with a high molecular mass owing to its long PEO and PPO blocks. In spite of good biocompatibility, its use as a component of drug delivery systems is limited by its high critical micelle concentration (CMC) and temperature (CMT). The aim of this work was to elucidate whether the addition of NaCl or the combination of salts and temperature may bring T1307 micellization and gelling features into more practically useful values. Increasing NaCl concentration in the 0.154 M (isotonic) to 2M (hypertonic) range made the copolymer more hydrophobic and more prone to self-assemble into unimodal micelles, as observed by means of π-A isotherms, (1)H NMR, dynamic light scattering (DLS), small-angle neutron scattering (SANS), and pyrene fluorescence. The decrease in CMC and CMT observed for T1307 in 0.5 M NaCl medium (tolerable hypertonic solution), compared to water, notably favored the solubility of hydrophobic drugs such as curcumin and quercetin. Moreover, phase diagram, intrinsic viscosity and sol-to-gel transition were markedly affected by NaCl concentration. Overall, the strong dependence of T1307 self-assembly features on NaCl opens interesting possibilities for tuning the performance of T1307 as a component of nanocarriers and in situ gelling systems.

A novel approach for predicting the dissolution profiles of pharmaceutical tablets

In this paper, the intrinsic dissolution profiles of naproxen (NAP) at pH values of 1.5 and 3.0 and of trimethoprim (TMP) at pH values of 1.5, 3.0, 5.0, 6.5 and 7.2 were measured. Meanwhile, the dissolution profiles of NAP and TMP from cylindrical tablets were measured at different temperatures (298.15K, 305.15K, 301.15K and 310.15K) and stirring speeds (50rpm, 100rpm and 150rpm) as well as at different pH values (1.5, 3.0, 5.0, 6.5 and 7.2). Additionally the pH-dependent solubilities of both APIs were measured and modeled. The chemical-potential-gradient model combined with the perturbed-chain statistical associating fluid theory (PC-SAFT) was applied to predict the dissolution profiles of the cylindrical tablets of NAP and TMP under different conditions based on the analysis of their intrinsic dissolution profiles as well as on the determination of the surface-area reduction of the API tablets during dissolution. It was shown that the predicted dissolution profiles of the tablets under different conditions were in a good accordance with the experimental findings.

Discovery and crystallography of bicyclic arylaminoazines as potent inhibitors of HIV-1 reverse transcriptase

Non-nucleoside inhibitors of HIV-1 reverse transcriptase (HIV-RT) are reported that incorporate a 7-indolizinylamino or 2-naphthylamino substituent on a pyrimidine or 1,3,5-triazine core. The most potent compounds show below 10 nanomolar activity towards wild-type HIV-1 and variants bearing Tyr181Cys and Lys103Asn/Tyr181Cys resistance mutations. The compounds also feature good aqueous solubility. Crystal structures for two complexes enhance the analysis of the structure-activity data.

The complexity of intestinal permeability: Assigning the correct BCS classification through careful data interpretation

While the solubility parameter is fairly straightforward when assigning BCS classification, the intestinal permeability (Peff) is more complex than generally recognized. In this paper we emphasize this complexity through the analysis of codeine, a commonly used antitussive/analgesic drug. Codeine was previously classified as a low-permeability compound, based on its lower LogP compared to metoprolol, a marker for the low-high permeability class boundary. In contrast, high fraction of dose absorbed (Fabs) was reported for codeine, which challenges the generally recognized Peff-Fabs correlation. The purpose of this study was to clarify this ambiguity through elucidation of codeine's BCS solubility/permeability class membership. Codeine's BCS solubility class was determined, and its intestinal permeability throughout the small intestine was investigated, both in vitro and in vivo in rats. Codeine was found to be unequivocally a high-solubility compound. All in vitro studies indicated that codeine's permeability is higher than metoprolol's. In vivo studies in rats showed similar permeability for both drugs throughout the entire small-intestine. In conclusion, codeine was found to be a BCS Class I compound. No Peff-Fabs discrepancy is involved in its absorption; rather, it reflects the risk of assigning BCS classification based on merely limited physicochemical characteristics. A thorough investigation using multiple experimental methods is prudent before assigning a BCS classification, to avoid misjudgment in various settings, e.g., drug discovery, formulation design, drug development and regulation.

Pharmacokinetics and in vivo antistaphylococcal efficacy of TXY541, a 1-methylpiperidine-4-carboxamide prodrug of PC190723

The benzamide derivative PC190723 was among the first of a promising new class of FtsZ-directed antibacterial agents to be identified that exhibit potent antistaphylococcal activity. However, the compound is associated with poor drug-like properties. As part of an ongoing effort to develop FtsZ-targeting antibacterial agents with increased potential for clinical utility, we describe herein the pharmacodynamics, pharmacokinetics, in vivo antistaphylococcal efficacy, and mammalian cytotoxicity of TXY541, a novel 1-methylpiperidine-4-carboxamide prodrug of PC190723. TXY541 was found to be 143-times more soluble than PC190723 in an aqueous acidic vehicle (10mM citrate, pH 2.6) suitable for both oral and intravenous in vivo administration. In staphylococcal growth media, TXY541 converts to PC190723 with a half-life of approximately 8h. In 100% mouse serum, the TXY541-to-PC190723 conversion was much more rapid (with a half-life of approximately 3min), suggesting that the conversion of the prodrug in serum is predominantly enzyme-catalyzed. Pharmacokinetic analysis of both orally and intravenously administered TXY541 in mice yielded a half-life for the PC190723 conversion product of 0.56h and an oral bioavailability of 29.6%. Whether administered orally or intravenously, TXY541 was found to be efficacious in vivo in mouse models of systemic infection with both methicillin-sensitive and methicillin-resistant S. aureus. Toxicological assessment of TXY541 against mammalian cells revealed minimal detectable cytotoxicity. The results presented here highlight TXY541 as a potential therapeutic agent that warrants further pre-clinical development.

Optimization of diarylazines as anti-HIV agents with dramatically enhanced solubility

Non-nucleoside inhibitors of HIV-1 reverse transcriptase are reported that have ca. 100-fold greater solubility than the structurally related drugs etravirine and rilpivirine, while retaining high anti-viral activity. The solubility enhancements come from strategic placement of a morpholinylalkoxy substituent in the entrance channel of the NNRTI binding site. Compound 4d shows low-nanomolar activity similar to etravirine towards wild-type HIV-1 and key viral variants.

Extension into the entrance channel of HIV-1 reverse transcriptase--crystallography and enhanced solubility

Non-nucleoside inhibitors of HIV-1 reverse transcriptase (HIV-RT) are reported that feature extension into the entrance channel near Glu138. Complexes of the parent anilinylpyrimidine 1 and the morpholinoethoxy analog 2j with HIV-RT have received crystallographic characterization confirming the designs. Measurement of aqueous solubilities of 2j, 2k, the parent triazene 2a, and other NNRTIs demonstrate profound benefits for addition of the morpholinyl substituent.