Bicellar systems as new delivery strategy for topical application of flufenamic acid

IR microspectroscopic investigation of the interaction of some losartan salts with human stratum corneum protein and its effect on losartan transdermal permeation

The interaction of pharmacologically active drugs with SC biochemical components is underestimated in pharmaceutical research. The aim of this research was to illustrate that some drugs intended for transdermal delivery could interact with the protein component of SC. Such interactions could be in favor of or opposition to their percutaneous absorption. IR microspectroscopy was used to delineate possible interaction of SC keratin with three losartan salts LOS-K, LOS-DEA and LOS-AML salts in addition to AML-BES salt. The results of PCA, combined with comparisons of average second derivative spectra of SC samples treated with these salts and the control SC, showed that LOS-DEA did not interact with SC, thus providing base line permeation of losartan. AML-BES, LOS-AML and LOS-K salts modified the conformational structure of keratin. The disorganization effect on the α-helical structure and induced formation of parallel β-sheets and random coils were in the order of AML-BES˃LOS-AML˃LOS-K. The order of the impact of treatments which resulted in increased formation of β-turns was AML-BES˃LOS-AML. The formation of antiparallel β-sheets was manifested by LOS-AML. Thus, the overall effect of these salts on the SC protein was AML-BES˃LOS-AML˃LOS-K. The impact of LOS-K was associated with improved permeation whereas the impact of LOS-AML was associated with hindered permeation of both losartan and amlodipine. There is a possibility that losartan and amlodipine when present in combination inside SC, their binding to the protein is enhanced leading to being retained within SC.

Oxymatrine-fatty acid deep eutectic solvents as novel penetration enhancers for transdermal drug delivery: formation mechanism and enhancing effect

Transdermal delivery of drugs is commonly limited by low skin permeability. The aim of the study was to synthesize deep eutectic solvents (DESs) based on oxymatrine (OMT) and fatty acids with various alkyl chain lengths (LCFAs) as novel vehicles, to solubilize the water-insoluble drug and enhance percutaneous penetration. Quercetin (QUE) was selected as a model drug. Combining differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and molecular simulations demonstrated that the formation of DESs was mediated by charge-assisted hydrogen bonding. Physicochemical properties including stability, viscosity, and solubilization capacity were also studied. Subsequently, the effect of three stable DESs on drug release and skin permeability was evaluated. The results showed that QUE was solubilized well and presented a different sustained release behavior in DESs. Meanwhile, DESs enhanced the skin permeation of OMT and QUE, which was influenced by alkyl chain lengths of LCFAs, whereas DES consisting of lauric acid (LA) exhibited the highest enhancing effect. FTIR, DSC, and molecular docking further demonstrated consistency between micro molecular mechanism and macro penetration behavior. Additionally, HaCaT cells treated with DESs showed high cell viability, suggesting their good skin safety. Taken together, OMT-LCFA DESs would be a promising penetration enhancer for transdermal drug delivery, which also provides guidance for the design of new DESs.

Unraveling How Cholesterol Affects Multivalency-Induced Membrane Deformation of Sub-100 nm Lipid Vesicles

Cholesterol plays a critical role in modulating the lipid membrane properties of biological and biomimetic systems and recent attention has focused on its role in the functions of sub-100 nm lipid vesicles and lipid nanoparticles. These functions often rely on multivalent ligand-receptor interactions involving membrane attachment and dynamic shape transformations while the extent to which cholesterol can influence such interaction processes is largely unknown. To address this question, herein, we investigated the attachment of sub-100 nm lipid vesicles containing varying cholesterol fractions (0-45 mol %) to membrane-mimicking supported lipid bilayer (SLB) platforms. Biotinylated lipids and streptavidin proteins were used as model ligands and receptors, respectively, while the localized surface plasmon resonance sensing technique was employed to track vesicle attachment kinetics in combination with analytical modeling of vesicle shape changes. Across various conditions mimicking low and high multivalency, our findings revealed that cholesterol-containing vesicles could bind to receptor-functionalized membranes but underwent appreciably less multivalency-induced shape deformation than vesicles without cholesterol, which can be explained by a cholesterol-mediated increase in membrane bending rigidity. Interestingly, the extent of vesicle deformation that occurred in response to increasingly strong multivalent interactions was less pronounced for vesicles with greater cholesterol fraction. The latter trend was rationalized by taking into account the strong dependence of the membrane bending energy on the area of the vesicle-SLB contact region and such insights can aid the engineering of membrane-enveloped nanoparticles with tailored biophysical properties.

Selective Separation of Fluorite from Scheelite Using N-Decanoylsarcosine Sodium as a Novel Collector

Fluorite and scheelite, which are strategic calcium-bearing minerals, have similar active sites (Ca2+); as a result, the efficient separation of the two minerals is still one of the world’s most difficult problems in the field of flotation. In this work, N-decanoylsarcosine sodium (SDAA), a non-toxic and low-cost amino acid surfactant, was applied in the flotation separation of fluorite from scheelite for the first time. In the test, single mineral, binary mixed minerals, and actual ore experiments showed that the pre-removal of fluorite from scheelite by reverse flotation can be achieved. The results of adsorption capacity detections, zeta potential tests, and FTIR analysis showed that the negatively charged SDAA prefers to adsorb onto the positively charged fluorite surface due to the electrostatic interaction. The results of crystal chemistry and DFT calculations showed that SDAA has a stronger chemical interaction and more electron transfer numbers to the Ca atom on the fluorite surface and forms a Ca-SDAA complex. Therefore, the significant difference in the adsorption behavior of SDAA on the surfaces of two minerals provided a new insight into the separation efficiency of amino acids and possesses a great potential for industrial application in scheelite flotation.

Microemulsions formed by PPG-5-CETETH-20 at low concentrations for transdermal delivery of nifedipine: Structural and in vitro study

Nifedipine is a potent anti-hypertensive, which is poorly orally bioavailable on account of first-pass metabolism, short half-life, and low water solubility. This study aimed to develop a microemulsified system with low surfactant concentration and to evaluate the influence of microemulsion (ME) phase behavior on skin permeation of nifedipine, as drug model. Thereafter, MEs were obtained using PPG-5-CETETH-20, oleic acid, and phosphate buffer at pH 5.0. The selected MEs were isotropic, with droplet diameters less than 10 nm, polydispersity index < 0.25, and pH between 5.0 and 5.2. MEs presented low viscosity and Newtonian behavior. SAXS results confirmed bicontinuous and oil-in-water (o/w) MEs formation. The presence of the drug promoted only very slight modifications in the ME structure. The MEs presented ability to deliver nifedipine via the transdermal route when in comparison with the control. Nevertheless, the skin permeated and retained amounts from the o/w and bicontinuous formulations did not differ significantly. The ATR-FTIR demonstrated that both formulations promoted fluidization and disorganization of lipids and increased the drug diffusion and partition coefficients in the skin. In conclusion, PPG-5-CETETH-20 MEs obtained proved to be effective skin permeation enhancers, acting by rising the coefficients of partition and diffusion of the nifedipine in the skin.

Profiling of drug crystallization in the skin

BACKGROUND

Drug crystallization following application of transdermal and topical formulations may potentially compromise the delivery of drugs to the skin. This phenomenon was found to be limited to the superficial layers of the stratum corneum (~7 µm) in our recent reports and tape stripping of the skin samples was necessary. It remains a significant challenge to profile drug crystallization in situ without damaging the skin samples.

METHODS

This work reports the application of an X-ray microbeam via synchrotron SAXS/WAXS analysis to monitor drug crystallization in the skin, especially in the deeper skin layers. Confocal Raman spectroscopy (CRS) was employed to examine drug distribution in the skin to complement the detection of drug crystallization using SAXS/WAXS analysis.

RESULTS

Following application of saturated drug solutions (ibuprofen, diclofenac acid, and salts), CRS depth profiles confirmed that the drugs generally were delivered to a depth of ~15 - 20 µm in the skin. This was compared with the WAXS profiles that measured drug crystal diffraction at a depth of up to ~25 µm of the skin.

CONCLUSION

This study demonstrates the potential of synchrotron SAXS/WAXS analysis for profiling of drug crystallization in situ in the deeper skin layers without pre-treatment for the skin samples. [Figure: see text].

Stimulatory Effects of Soluplus® on Flufenamic Acid β-Cyclodextrin Supramolecular Complex: Physicochemical Characterization and Pre-clinical Anti-inflammatory Assessment

The present study demonstrates the solubility and dissolution of flufenamic acid (FLF)/β-cyclodextrin (β-CD)/Soluplus® supramolecular ternary inclusion complex. The binary and ternary inclusion complexes were prepared using solvent evaporation and the microwave irradiation method. The prepared inclusion complexes were evaluated for physicochemical characterization and anti-inflammatory activity using a murine paw edema mol. The phase solubility studies demonstrated 4.59-fold and 17.54-fold enhancements in FLF solubility with β-CD alone and β-CD:Soluplus® combination compared with pure FLF, respectively. The in vitro drug release results revealed a significant improvement (P < 0.05) in the release pattern compared with pure FLF. Maximum release was found with flufenamic acid binary and ternary complexes prepared using the microwave irradiation method, i.e., 75.23 ± 3.12% and 95.36 ± 3.23% in 60 min, respectively. The physicochemical characterization results showed complex formation and conversion of the crystalline form of FLF to an amorphous form. The SEM study revealed the presence of a more agglomerated and amorphous structure of the solid particles, which confirmed the formation of complexes. The anti-inflammatory effect of the complex was higher than pure FLF. Therefore, the FLF:β-CD:Soluplus® inclusion complex may be a very valuable formulation with improved solubility, dissolution, and anti-inflammatory effect.

Development, Optimization and In Vitro/In Vivo Characterization of Collagen-Dextran Spongious Wound Dressings Loaded with Flufenamic Acid

The aim of this study was the development and optimization of some topical collagen-dextran sponges with flufenamic acid, designed to be potential dressings for burn wounds healing. The sponges were obtained by lyophilization of hydrogels based on type I fibrillar collagen gel extracted from calf hide, dextran and flufenamic acid, crosslinked and un-crosslinked, and designed according to a 3-factor, 3-level Box-Behnken experimental design. The sponges showed good fluid uptake ability quantified by a high swelling ratio. The flufenamic acid release profiles from sponges presented two stages—burst effect resulting in a rapid inflammation reduction, and gradual delivery ensuring the anti-inflammatory effect over a longer burn healing period. The resistance to enzymatic degradation was monitored through a weight loss parameter. The optimization of the sponge formulations was performed based on an experimental design technique combined with response surface methodology, followed by the Taguchi approach to select those formulations that are the least affected by the noise factors. The treatment of experimentally induced burns on animals with selected sponges accelerated the wound healing process and promoted a faster regeneration of the affected epithelial tissues compared to the control group. The results generated by the complex sponge characterization indicate that these formulations could be successfully used for burn dressing applications.

Effects of permeation enhancers on flufenamic acid delivery in Ex vivo human skin by confocal Raman microscopy

For effective topical delivery, a drug must cross the stratum corneum (SC) barrier into viable tissue. The use of permeation enhancers is a widespread approach for barrier modification. In the current study, flufenamic acid (FluA), a non-steroidal anti-inflammatory drug, is a model agent for investigating the influence of hydrophobic versus hydrophilic enhancers. In separate experiments, FluA in octanol or propylene glycol/ethanol (75/25) is applied to the SC for varying times followed by confocal Raman microscopic mapping of drug and enhancer penetration and spatial distribution. Deuterated versions of the enhancers permit us to spectroscopically distinguish the exogenous chemicals from the endogenous SC lipids without affecting penetration parameters. The FluA pathway is tracked by the CC stretching mode at ∼1618cm(-1). Discrete, small inclusions of both enhancers are observed throughout the SC. High concentrations of FluA are co-localized with octanol domains which appear to provide a pathway to the viable epidermis for the drug. In contrast, FluA concentrates in the upper SC when using the hydrophilic agent and endogenous lipids appear unperturbed in regions outside the enhancer pockets. The ability to examine perturbations to endogenous ultrastructure and molecular structure in skin while tracking penetration pathways provides insight into delivery mechanisms.

The Relationship between Solubility and Transdermal Absorption of Tadalafil

PURPOSE

The aim of this study was to find a relationship between drug solubility and its transdermal permeation and find the best vehicle composition to improve transdermal permeation of Tadalafil.

METHODS

Pure or binary mixtures of commonly used solvents in pharmaceutical sciences including ethanol, glycerin, N-methyl pyrrolidone (NMP), polyethylene glycol (PEG) 400 and propylene glycol (PG) were evaluated for drug solubility and transdermal delivery through the exercised rat skin employing Franz diffusion cells.

RESULTS

Tadalafil showed higher solubility in NMP compared to the other solvents. The amount of Tadalafil permeation from the pure vehicles was ranked as follow: Ethanol >glycerin >NMP>PEG 400 >PG. Furthermore, the solubility and transdermal delivery from binary mixtures of NMP and PG were higher than that obtained from pure PG, and accordingly, both increased with increasing NMP concentration in the binary solvent mixtures. The Flux values were determined as following order for Ethanol>NMP>glycerin>PG>PEG 400.

CONCLUSION

Generally, increase in Tadalafil solubility resulted in a decrease in its skin penetration rate and amount. However, NMP exhibited substantial drug skin penetration rate and amount accompanying with appropriate drug solvency. In conclusion, the results of this study introduced NMP as a solvent suitable for application in the formulation of topically applied drug delivery systems.

A time-resolved study on the interaction of oppositely charged bicelles--implications on the charged lipid exchange kinetics

Time-resolved small-angle X-ray scattering was applied to study charged lipid exchange between oppositely charged disc-shaped bicelles. The exchange of charged lipids gradually reduces the surface charge density and weakens the electrostatic attraction between the oppositely charged bicelles which form alternately stacked aggregates upon mixing. Initially, at a high surface charge density with almost no free water layer between the stacked bicelles, fast exchange kinetics dominate the exchange process. At a later stage with a lower surface charge density and a larger water gap between the stacked bicelles, slow exchange kinetics take over. The fast exchange kinetics are correlated with the close contact of the bicelles when there is almost no free water layer between the tightly bound bicelles with a charged lipid exchange time constant as short as 20-40 min. When the water gap becomes large enough to have a free water layer between the stacked bicelles, the fast lipid exchange kinetics are taken over by slow lipid exchange kinetics with time constants around 200-300 min, which are comparable to the typical time constant of lipid exchange between vesicles in aqueous solution. These two kinds of exchange mode fit well with the lipid exchange models of transient hemifusion for the fast mode and monomer exchange for the slow mode.