Capreomycin inhalable powders prepared with an innovative spray-drying technique

Engineering Inhalable Therapeutic Particles: Conventional and Emerging Approaches

Respirable particles are integral to effective inhalable therapeutic ingredient delivery, demanding precise engineering for optimal lung deposition and therapeutic efficacy. This review describes different physicochemical properties and their role in determining the aerodynamic performance and therapeutic efficacy of dry powder formulations. Furthermore, advances in top-down and bottom-up techniques in particle preparation, highlighting their roles in tailoring particle properties and optimizing therapeutic outcomes, are also presented. Practices adopted for particle engineering during the past 100 years indicate a significant transition in research and commercial interest in the strategies used, with several innovative concepts coming into play in the past decade. Accordingly, this article highlights futuristic particle engineering approaches such as electrospraying, inkjet printing, thin film freeze drying, and supercritical processes, including their prospects and associated challenges. With such technologies, it is possible to reshape inhaled therapeutic ingredient delivery, optimizing therapeutic benefits and improving the quality of life for patients with respiratory diseases and beyond.

Development and Pharmacokinetics of a Novel Acetylsalicylic Acid Dry Powder for Pulmonary Administration

Aspirin is an historic blockbuster product, and it has been proposed in a wide range of formulas. Due to exacerbation risks, the pulmonary route has been seldom considered as an alternative to conventional treatments. Only recently, owing to overt advantages, inhalable acetylsalicylic acid dry powders (ASA DPI) began to be considered as an option. In this work, we developed a novel highly performing inhalable ASA DPI using a nano spray-drying technique and leucine as an excipient and evaluated its pharmacokinetics compared with oral administration. The formulation obtained showed remarkable respirability and quality features. Serum and lung ASA DPI profiles showed faster presentation in blood and higher retention compared with oral administration. The dry powder was superior to the DPI suspension. The relative bioavailability in serum and lungs claimed superiority of ASA DPI over oral administration, notwithstanding a fourfold lower pulmonary dose. The obtained ASA DPI formulation shows promising features for the treatment of inflammatory and infectious lung pathologies.

A review of formulations and preclinical studies of inhaled rifampicin for its clinical translation

Inhaled drug delivery is a promising approach to achieving high lung drug concentrations to facilitate efficient treatment of tuberculosis (TB) and to reduce the overall duration of treatment. Rifampicin is a good candidate for delivery via the pulmonary route. There have been no clinical studies yet at relevant inhaled doses despite the numerous studies investigating its formulation and preclinical properties for pulmonary delivery. This review discusses the clinical implications of pulmonary drug delivery in TB treatment, the drug delivery systems reported for pulmonary delivery of rifampicin, animal models, and the animal studies on inhaled rifampicin formulations, and the research gaps hindering the transition from preclinical development to clinical investigation. A review of reports in the literature suggested there have been minimal attempts to test inhaled formulations of rifampicin in laboratory animals at relevant high doses and there is a lack of appropriate studies in animal models. Published studies have reported testing only low doses (≤ 20 mg/kg) of rifampicin, and none of the studies has investigated the safety of inhaled rifampicin after repeated administration. Preclinical evaluations of inhaled anti-TB drugs, such as rifampicin, should include high-dose formulations in preclinical models, determined based on allometric conversions, for relevant high-dose anti-TB therapy in humans.

Dry powder inhalers of antitubercular drugs

Despite advancements in the medical and pharmaceutical fields, tuberculosis remains a major health problem globally. Patients do not widely accept the conventional approach to treating tuberculosis (TB) due to prolonged treatment periods with multiple high doses of drugs and associated side effects. A pulmonary route is a non-invasive approach to delivering drugs, hormones, nucleic acid, steroids, proteins, and peptides directly to the lungs, improving the efficacy of the treatment and consequently decreasing the adverse effect of the treatment. This route has been successfully developed for the treatment of various respiratory diseases such as asthma, chronic obstructive pulmonary disease (COPD), tuberculosis (TB), lung cancer, and other pulmonary infections. The major approaches of inhalation delivery systems include nebulizers, metered-dose inhalers (MDIs), and dry powder inhalers (DPIs). However, dry powder inhalers (DPIs) are more advantageous due to their stability and ability to deliver a high dose of the drug to the lungs. The present review analyzes the modern therapeutic approach of inhaled dry powders, with a special focus on novel drug delivery system (NDDS) based DPIs for the treatment of TB. The article also discussed the challenges of preparing inhalable dry powder formulations for the treatment of TB. The clinical development of inhalable anti-TB drugs is also reviewed.

Optimization of Particle Properties of Nanocrystalline Solid Dispersion Based Dry Powder for Inhalation of Voriconazole

A one-step spray drying based process was employed to generate ready-to-use nanocrystalline solid dispersion (NCSD) dry powder for inhalation (DPI) of voriconazole (VRC). The solid dispersion was prepared by spray drying VRC, MAN (mannitol) and soya lecithin (LEC) from mixture of methanol-water. Various formulation and process related parameters were screened, including LEC, inlet temperature, total solid content and feed flow rate to generate particles of geometric size ≤5 µm. Aerosil® 200 was explored as the quaternary excipient either during spray drying or by physically mixing with the optimized ternary NCSD. The powders were extensively characterized for solid form, primary particle size, assay, embedded nanocrystal size, morphology, porosity, density and moisture content. Aerodynamic properties were studied using next generation impactor (NGI), while surface elemental composition and topography were investigated using SEM-EDS (scanning electron microscopy- energy dispersive spectroscopy) and AFM (atomic force microscopy), respectively. At selected inlet temperature of 120 ˚C, total solid content and feed flow rate significantly impacted the size of primary NCSD particles. Size of primary particles increased with increase in total solid content and feed flow rate of the solution. VRC nanocrystals were obtained in polymorphic Form B whereas the matrix of MAN consisted of mixture of polymorphic Forms α, β and δ. SEM-EDS analysis confirmed deposition of Aerosil® 200 on surface of spray dried particles. In addition to increased porosity and reduced density, increase in surface roughness of particles (evident from AFM topographic analysis) contributed to enhanced powder deposition at stages 3 and 4 in NGI. In comparison, physical blending of NCSD with Aerosil® 200 showed improvement in aerosolization due to flow enhancement property.

Particle Engineering by Nano Spray Drying: Optimization of Process Parameters with Hydroethanolic versus Aqueous Solutions

Nano spray drying has emerged as an outstanding platform for engineering micro- and nanoparticles, with growing applications in various areas of drug delivery. As a new technology involving distinct technical design, parameters of the nano spray drying process are not fully elucidated. In a quality-by-design approach, the aim of the current study was to gain thorough understanding of critical determinants of product characteristics in the Büchi Nano Spray Dryer B-90. Following a factorial experimental design, a series of spray drying experiments were conducted to gain new insights into the influences of the inlet temperature, the spray solvent, and the solute concentration in the spray solution on the yield, the moisture content, and the particle size of the nano spray-dried powder material. Special consideration was given to the potential of using hydroethanolic in comparison with aqueous solvent systems and to particle engineering for pulmonary drug delivery. Lactose and mannitol, widely used as excipients in dry powder inhalation formulations, were used as model materials. Lactose and mannitol are known to spray dry in amorphous and crystalline forms, respectively. The yields of spray drying of lactose and mannitol amounted generally to 71.1 ± 6.6% w/w and 66.1 ± 3.5% w/w, respectively. The spray-dried materials exhibited generally a number-weighted median particle diameter of 1.6 ± 0.2 μm and a volume-weighted median particle diameter of 5.1 ± 1.0 μm. A detailed analysis of the results improved understanding of the interplay between process parameters in the Nano Spray Dryer. The results demonstrate that optimization of spray generation is the key to yield optimization. On the other hand, particle size is determined by the spray mesh pore size and the spray solution degree of saturation. Selection of an appropriate spray solvent and using spray solution additives could optimize spray flow. In parallel, the spray solvent and the solute concentration in the spray solution determine the degree of saturation. Guidance on optimization of particle engineering by nano spray drying is provided.

Spray freeze drying to solidify Nanosuspension of Cefixime into inhalable microparticles

PURPOSE

Spray-freeze drying (SFD) incorporating diverse carbohydrates and leucine was employed to obtain dried nanosuspension of cefixime with improved dissolution profile, good dispersibility, and excellent inhalation performance.

METHODS

Nanoprecipitation was utilized to prepare nanoparticles (NPs). Nanosuspensions of cefixime were solidified via SFD to access inhalable microparticles. The aerosolization efficiencies were evaluated through twin stage impinger (TSI). Laser light scattering and scanning electron microscopy (SEM) provided assistance to determine the particle size/size distribution and morphology, respectively. Amorphous/ crystalline states of materials were examined via differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Release profiles of candidate preparations were evaluated.

RESULTS

The fine particle fraction (FPF) ranged from 18.96 ± 0.76 to 79.28 ± 0.45%. The highest value resulted from trehalose with NP/carrier ratio of 1:1 and leucine 20%. The particle size varied from 5.24 ± 0.97 to 10.17 ± 1.01 μm. The most and the least size distribution were achieved in mannitol and trehalose containing formulations, respectively. The majority of samples demonstrated ideally spherical morphology with diverse degrees of porosity and without needle-shaped structure. Percentages of release in F₇ and F₈ were 89.33 ± 0.88% and 93.54 ± 1.02%, respectively, via first 10 min.

CONCLUSION

SFD of nanosuspensions can be established as a platform for the pulmonary delivery of poorly water-soluble molecules of cefixime. Trehalose and raffinose with a lower ratio of NP to the carrier and higher level of leucine could be introduced as favorable formulations for further respiratory delivery of cefixime.

Spray-Dried Powder Formulation of Capreomycin Designed for Inhaled Tuberculosis Therapy

Multi-drug-resistant tuberculosis (MDR-TB) is a huge public health problem. The treatment regimen of MDR-TB requires prolonged chemotherapy with multiple drugs including second-line anti-TB agents associated with severe adverse effects. Capreomycin, a polypeptide antibiotic, is the first choice of second-line anti-TB drugs in MDR-TB therapy. It requires repeated intramuscular or intravenous administration five times per week. Pulmonary drug delivery is non-invasive with the advantages of local targeting and reduced risk of systemic toxicity. In this study, inhaled dry powder formulation of capreomycin targeting the lung was developed using spray drying technique. Among the 16 formulations designed, the one containing 25% capreomycin (w/w) and spray-dried at an inlet temperature of 90 °C showed the best overall performance with the mass median aerodynamic diameter (MMAD) of 3.38 μm and a fine particle fraction (FPF) of around 65%. In the pharmacokinetic study in mice, drug concentration in the lungs was approximately 8-fold higher than the minimum inhibitory concentration (MIC) (1.25 to 2.5 µg/mL) for at least 24 h following intratracheal administration (20 mg/kg). Compared to intravenous injection, inhaled capreomycin showed significantly higher area under the curve, slower clearance and longer mean residence time in both the lungs and plasma.

Nano Spray-Dried Drugs for Oral Administration: A Review

Spray drying is an important technology that is fast, simple, reproducible, and scalable. It has a wide application range, that is, in food, chemicals, and encapsulation of pharmaceuticals. The technology can be divided into conventional spray drying and nano spray drying. The key advantage of nano spray drying is the production of drug-loaded nanosized particles for various drug delivery applications. The recent developments in nano spray dryer technology and the market launch of the Nano Spray Dryer B-90 by Büchi Labortechnik AG in 2009 enabled the production of submicron spray-dried particles. This review focuses on nanosized drug delivery systems intended for oral administration produced by nano spray drying. First, the nano spray drying concept, the basic technologies implemented in the equipment, and the effects of the various process parameters on the final dry submicron powder properties are presented. Then, the topics of new formulation strategies of oral drugs are highlighted with examples that have entered the research literature in recent years. Next, the subjects of direct conversion of poorly water-soluble drugs, encapsulation of drugs, and drying of preformed nanoparticles are considered. Finally, topics such as morphology, particle size, size distribution, surface analysis, bioavailability, drug release, release kinetics, and solid-state characterization (by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, nuclear magnetic resonance) of oral drug delivery systems produced by nano spray drying are discussed. The review attempts to provide a comprehensive knowledge base with current literature and foresight to researchers working in the field of pharmaceutical technology and nanotechnology and especially in the field of nano spray drying.

Resistant Tuberculosis: the Latest Advancements of Second-line Antibiotic Inhalation Products

Drug-resistant tuberculosis (TB) can be considered the man-made result of interrupted, erratic or inadequate TB therapy. As reported in WHO data, resistant Mycobacterium tuberculosis (Mtb) strains continue to constitute a public health crisis. Mtb is naturally able to survive host defence mechanisms and to resist most antibiotics currently available. Prolonged treatment regimens using the available first-line drugs give rise to poor patient compliance and a rapid evolution of strains resistant to rifampicin only or to both rifampicin and isoniazid (multi drug-resistant, MDR-TB). The accumulation of mutations may give rise to extensively drug-resistant strains (XDR-TB), i.e. strains with resistance also to fluoroquinolones and to the injectable aminoglycoside, which represent the second-line drugs. Direct lung delivery of anti-tubercular drugs, as an adjunct to conventional routes, provides high concentrations within the lungs, which are the intended target site of drug delivery, representing an interesting strategy to prevent or reduce the development of drug-resistant strains. The purpose of this paper is to describe and critically analyse the most recent and advanced results in the formulation development of WHO second-line drug inhalation products, with particular focus on dry powder formulation. Although some of these formulations have been developed for other lung infectious diseases (Pseudomonas aeruginosa, nontuberculous mycobacteria), they could be valuable to treat MDR-TB and XDR-TB.

Single step nanospray drying preparation technique of gabapentin-loaded nanoparticles-mediated brain delivery for effective treatment of PTZ-induced seizures

In the present study, gabapentin (GBP)-loaded chitosan nanosized particles were fabricated applying the nanospray drying technique. Different preparation parameters (spray mesh diameter, chitosan concentration and presence of D-α-Tocopherol polyethylene glycol 1000 succinate (TPGS) were studied while fixing other parameters (spraying rate, inlet temperature and gas flow rate). An optimized formulation with a particle size 107 ± 13 nm was obtained upon spraying 0.1% (w/v) chitosan solution containing 0.05% (w/v) of TPGS utilizing the small nozzle (4 μm spray mesh hole size). Drug entrapment efficiency and yield were as high as 95% and 83%, respectively. A 98.1 ± 6.1% (w/w) cumulative drug release was recorded after 2 h. Confocal laser scanning microscopy showed higher fluorescent dye penetration into brain tissue following intranasal administration of Rhodamine B labeled spray dried chitosan nanoparticles (NPs) as compared to Rhodamine B solution. Pentylenetetrazole (PTZ) was used to induce convulsions in rats through elevating seizure stages, releasing neuroinflammatory mediators and reducing excitatory amino acid transporter 2 (EAAT 2) and γ-aminobutyric acid (GABA) brain contents. Nanospray dried GBP-loaded chitosan NPs reduced seizure score, neuroinflammation; TNF-α and TGF-β, elevated EAAT 2 and GABA as well as decreased degeneration in pyramidal neurons compared to marketed product Conventin® capsules. Thus, it can be concluded from the aforementioned data that nanospray dried GBP-loaded chitosan NPs could comprise an appropriate treatment of epilepsy.

Spray drying as an advantageous strategy for enhancing pharmaceuticals bioavailability

Spray drying is an efficient technique that is used not only for rapid evaporation of the solvent from different systems but also for designing ultra-fine particles with various desirable characteristics. The obtained powders demonstrate reasonably narrow size distribution with a submicron-to-micron size range. It is one of the recent techniques applied to present acceptable solutions to enhance the absorption and bioavailability of some challenging drugs. In view of that, the purpose of this review is to shed some light on the wide variety of the recently developed fine particulate products that can be produced from spray-drying technique. This article reports the most outstanding advantages and challenges that could be overcome by exploiting the spray-drying technique for the production of different pharmaceuticals, including pure drug particles and drug-loaded polymeric carriers. The potential of this technique, whether used alone or in combination with other methods, in order to develop reproducible and scalable procedures for the best translation of bench-to-bedside innovation of pharmaceutical products is hereby discussed.

A simple and sensitive HPLC-MS/MS assay for the quantitation of montelukast in cell-based systems in vitro pulmonary drug permeability study

Montelukast is a potent and selective antagonist of the cysteinyl leukotriene receptor 1 subtype (CysLT1) and widely used in the form of oral tablets and granules for asthma prophylaxis and treatment. Recently, due to the pulmonary inhaled administration can limit montelukast distribution in the systemic circulation, avoid the first-pass metabolism and have better therapeutic effects in respiratory disease treatment, explore alternative routes of administration, like delivery of montelukast via an inhaled, is a new research trend for montelukast. The aim of the current study was to develop and validate a simple, accurate, highly sensitive and selective liquid chromatography-tandem mass spectrometry method (LC-MS/MS) for determination of montelukast in an in vitro cell-based pulmonary pharmacokinetics system model, which can be used to be a better understanding the fate of inhaled montelukast in the lungs. In this study, montelukast was extracted by protein precipitation with acetonitrile containing labeled montelukast. The chromatography was performed on an Agilent Eclipse plus C8 column (4.6 mm × 100 mm, 3.5 μm, Darmstadt, Germany) operating at 35 ◦C. The mobile phase consisted of acetonitrile: 20 mM ammonium formate buffer (80: 20, v/v), was delivered at a flow rate of 0.5 mL/min. montelukast and the internal standard were both eluted at 4.2 min. A linear (1/x²) relationship was used to perform the calibration over an analytical range from 0.5 to 600 ng/mL. The intra- and inter-batch precision expressed as CV for four QC samples including LLOQ range from 1.14 % to 6.25 %. The intra- and inter-batch accuracy for four concentrations of montelukast were in the range of 95.19%-104.1%. All the values for accuracy and precision were within the acceptance range. The method met all the bioanalytical method validation requirements by ICH and was suitable for the assay of montelukast which in the in vitro cell-based pulmonary pharmacokinetics system model.

Spray Drying for the Preparation of Nanoparticle-Based Drug Formulations as Dry Powders for Inhalation

Nanoparticle-based therapeutics have been used in pulmonary formulations to enhance delivery of poorly water-soluble drugs, protect drugs against degradation and achieve modified release and drug targeting. This review focuses on the use of spray drying as a solidification technique to produce microparticles containing nanoparticles (i.e., nanoparticle (NP) agglomerates) with suitable properties as dry powders for inhalation. The review covers the general aspects of pulmonary drug delivery with emphasis on nanoparticle-based dry powders for inhalation and the principles of spray drying as a method for the conversion of nanosuspensions to microparticles. The production and therapeutic applications of the following types of NP agglomerates are presented: nanoporous microparticles, nanocrystalline agglomerates, lipid-based and polymeric formulations. The use of alternative spray-drying techniques, namely nano spray drying, and supercritical CO2-assisted spray drying is also discussed as a way to produce inhalable NP agglomerates.

Dry powder inhalable formulations for anti-tubercular therapy

Tuberculosis (TB) is an intracellular infectious disease caused by the airborne bacterium, Mycobacterium tuberculosis. Despite considerable research efforts, the treatment of TB continues to be a great challenge in part due to the requirement of prolonged therapy with multiple high-dose drugs and associated side effects. The delivery of pharmacological agents directly to the respiratory system, following the natural route of infection, represents a logical therapeutic approach for treatment or vaccination against TB. Pulmonary delivery is non-invasive, avoids first-pass metabolism in the liver and enables targeting of therapeutic agents to the infection site. Inhaled delivery also potentially reduces the dose requirement and the accompanying side effects. Dry powder is a stable formulation of drug that can be stored without refrigeration compared to liquids and suspensions. The dry powder inhalers are easy to use and suitable for high-dose formulations. This review focuses on the current innovations of inhalable dry powder formulations of drug and vaccine delivery for TB, including the powder production method, preclinical and clinical evaluations of inhaled dry powder over the last decade. Finally, the risks associated with pulmonary therapy are addressed. A novel dry powder formulation with high percentages of respirable particles coupled with a cost effective inhaler device is an appealing platform for TB drug delivery.

Inhaled drug treatment for tuberculosis: Past progress and future prospects

Since the 1990s the rising incidence of multiple drug resistant TB, particularly in the context of human immunodeficiency virus co-infected patients, has threatened global TB control. At that time funding agencies began to support formal investigation of aerosol therapy which until then had been the subject of case reports of individual investigators. Over the last decade, proponents of aerosol therapy have increased in number within the TB research community as the incidence of multiple and extremely drug resistant TB has increased dramatically around the world. Aerosol therapy offers the potential to deliver drug at target concentrations directly into the lungs, use the alveolar-capillary interface to achieve systemic levels, while reducing the risk of systemic toxicity seen with parentally administered doses. In addition, there are insufficient new drugs in the pipeline to anticipate the appearance of a new regimen in time to assure future control of drug resistance. Consequently, alternative strategies are critical to achieving global TB control, and inhaled therapies should be considered as one such strategy.

Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers

Spray-drying is a rapid, continuous, cost-effective, reproducible and scalable process for the production of dry powders from a fluid material by atomization through an atomizer into a hot drying gas medium, usually air. Often spray-drying is considered only a dehydration process, though it also can be used for the encapsulation of hydrophilic and hydrophobic active compounds within different carriers without substantial thermal degradation, even of heat-sensitive substances due to fast drying (seconds or milliseconds) and relatively short exposure time to heat. The solid particles obtained present relatively narrow size distribution at the submicron-to-micron scale. Generally, the yield% of spray-drying at laboratory scale with conventional spray-dryers is not optimal (20-70%) due to the loss of product in the walls of the drying chamber and the low capacity of the cyclone to separate fine particles (<2 μm). Aiming to overcome this crucial drawback in early development stages, new devices that enable the production of submicron particles with high yield, even for small sample amounts, have been introduced into the market. This review describes the most outstanding advantages and challenges of the spray-drying method for the production of pure drug particles and drug-loaded polymeric particles and discusses the potential of this technique and the more advanced equipment to pave the way toward reproducible and scalable processes that are critical to the bench-to-bedside translation of innovative pharmaceutical products.

A Design of Experiment Study of Nanoprecipitation and Nano Spray Drying as Processes to Prepare PLGA Nano- and Microparticles with Defined Sizes and Size Distributions

PURPOSE

Aim of this study was to explore the potential of a design of experiments approach to nanoprecipitation (NPR) and nano spray drying (NSD) as processes for preparing poly (lactic-co-glycolic acid, PLGA) nano- and microparticles. In particular, we determined the feasible size range, critical factors influencing particle size, size distribution or yield, and the robustness towards variations of the batch size.

METHODS

A fractional factorial design for response surface was applied to study the influence on continuous, categorical and discrete factors.

RESULTS

NPR yielded nanoparticles (150-200 nm) with narrow size distribution (PDI < 0.15). Polymer concentration was the main factor in this process, which was found to be very robust to varying the batch size (0.625-50.0 ml). In contrast, NSD yielded microparticles (2-163 μm). The latter process appeared, however, to be influenced by various factors and, therefore, more difficult to control and less robust towards varying the batch size (5-40 ml). By a factorial design approach to NPR, we succeeded to derive an equation, which allowed the prediction of several optimal formulations with defined particle sizes and distributions.

CONCLUSION

DOE can help to understand innovative manufacturing processes for nano- and microparticulate drug delivery systems, as well as to optimize these processes regarding particle size, size distribution and yield. Such understanding of these processes is instrumental for their subsequent scale up and quality control as needed for preclinical and clinical test batches.