Ultrasound and electric pulses for transdermal drug delivery enhancement: Ex vivo assessment of methods with in vivo oriented experimental protocols

Synergistic Strategies of Biomolecular Transport Technologies in Transdermal Healthcare Systems

Transdermal healthcare systems have gained significant attention for their painless and convenient drug administration, as well as their ability to detect biomarkers promptly. However, the skin barrier limits the candidates of biomolecules that can be transported, and reliance on simple diffusion poses a bottleneck for personalized diagnosis and treatment. Consequently, recent advancements in transdermal transport technologies have evolved toward active methods based on external energy sources. Multiple combinations of these technologies have also shown promise for increasing therapeutic effectiveness and diagnostic accuracy as delivery efficiency is maximized. Furthermore, wearable healthcare platforms are being developed in diverse aspects for patient convenience, safety, and on-demand treatment. Herein, a comprehensive overview of active transdermal delivery technologies is provided, highlighting the combination-based diagnostics, therapeutics, and theragnostics, along with the latest trends in platform advancements. This offers insights into the potential applications of next-generation wearable transdermal medical devices for personalized autonomous healthcare.

Advancements in transdermal drug delivery: A comprehensive review of physical penetration enhancement techniques

Transdermal drug administration has grown in popularity in the pharmaceutical research community due to its potential to improve drug bioavailability, compliance among patients, and therapeutic effectiveness. To overcome the substantial barrier posed by the stratum corneum (SC) and promote drug absorption within the skin, various physical penetration augmentation approaches have been devised. This review article delves into popular physical penetration augmentation techniques, which include sonophoresis, iontophoresis, magnetophoresis, thermophoresis, needle-free injection, and microneedles (MNs) Sonophoresis is a technique that uses low-frequency ultrasonic waves to break the skin's barrier characteristics, therefore improving drug transport and distribution. In contrast, iontophoresis uses an applied electric current to push charged molecules of drugs inside the skin, effectively enhancing medication absorption. Magnetophoresis uses magnetic fields to drive drug carriers into the dermis, a technology that has shown promise in aiding targeted medication delivery. Thermophoresis is the regulated heating of the skin in order to improve drug absorption, particularly with thermally sensitive drug carriers. Needle-free injection technologies, such as jet injectors (JIs) and microprojection arrays, offer another option by producing temporary small pore sizes in the skin, facilitating painless and effective drug delivery. MNs are a painless, minimally invasive method, easy to self-administration, as well as high drug bioavailability. This study focuses on the underlying processes, current breakthroughs, and limitations connected with all of these approaches, with an emphasis on their applicability in diverse therapeutic areas. Finally, a thorough knowledge of these physical enhancement approaches and their incorporation into pharmaceutical research has the potential to revolutionize drug delivery, providing more efficient and secure treatment choices for a wide range of health-related diseases.

How physical techniques improve the transdermal permeation of therapeutics: A review

BACKGROUND

Transdermal delivery is very important in pharmaceutics. However, the barrier function of the stratum corneum hinders drugs absorption. How to improve transdermal delivery efficiency is a hot topic. The key advantages of physical technologies are their wide application for the delivery of previously nonappropriate transdermal drugs, such as proteins, peptides, and hydrophilic drugs. Based on the improved permeation of drugs delivered via multiple physical techniques, many more diseases may be treated, and transdermal vaccinations become possible. However, their wider application depends on the related convenient and portable devices. Combined products comprising medicine and devices represent future commercial directions of artificial intelligence and 3D printing.

METHODS

A comprehensive search about transdermal delivery assisted by physical techniques has been carried out on Web of Science, EMBASE database, PubMed, Wanfang Database, China National Knowledge Infrastructure, and Cochrane Library. The search identified and retrieved the study describing multiple physical technologies to promote transdermal penetration.

RESULTS

Physical technologies, including microneedles, lasers, iontophoresis, sonophoresis, electroporation, magnetophoresis, and microwaves, are summarized and compared. The characteristics, mechanism, advantages and disadvantages of physical techniques are clarified. The individual or combined applicable examples of physical techniques to improve transdermal delivery are summarized.

CONCLUSION

This review will provide more useful guidance for efficient transdermal delivery. More therapeutic agents by transdermal routes become possible with the assistance of various physical techniques.

Modulating the foreign body response of implants for diabetes treatment

Diabetes Mellitus is a group of diseases characterized by high blood glucose levels due to patients' inability to produce sufficient insulin. Current interventions often require implants that can detect and correct high blood glucose levels with minimal patient intervention. However, these implantable technologies have not reached their full potential in vivo due to the foreign body response and subsequent development of fibrosis. Therefore, for long-term function of implants, modulating the initial immune response is crucial in preventing the activation and progression of the immune cascade. This review discusses the different molecular mechanisms and cellular interactions involved in the activation and progression of foreign body response (FBR) and fibrosis, specifically for implants used in diabetes. We also highlight the various strategies and techniques that have been used for immunomodulation and prevention of fibrosis. We investigate how these general strategies have been applied to implants used for the treatment of diabetes, offering insights on how these devices can be further modified to circumvent FBR and fibrosis.

Analysis on reversible/irreversible electroporation region in lung adenocarcinoma cell model in vitro with electric pulses delivered by needle electrodes

Irreversible electroporation (IRE) is a minimally invasive tumor therapy using pulsed electric field with high intensity while the important tissues such as blood vessel, bile duct, and nerve are preserved. In addition to ablation area, reversible electroporation (RE) region is also generated using needle electrodes for pulse delivery. The goal of this work is to study the generation of RE region and ablation region on a 2D lung adenocarcinoma cell model in vitro. The tumor model is exposed to electric pulses with various number. The calcium AM and propidium iodide (PI) are examined to detect the ablation area and electroporation area, respectively. The results show that electroporation area firstly tends to plateau after approximately 50 pulses, while the ablation area continues to increase. The percentage of IRE area in total electroporation area increases with additional pulses, which means that RE region could be gradually turned into ablation area with increased pulse number. However, the percentage of IRE area only achieves to 54% for 200 pulses, which indicates that RE region still cannot be completely removed. RE and IRE thresholds appear to converge as the number of pulses increases. An equation between pulse number and the electric field threshold of ablation including the electric field threshold of RE is also provided for lung adenocarcinoma cell ablation. This work may have the value for the optimization of IRE protocols on tumor ablation.

Electroporation-enhanced transdermal drug delivery: Effects of logP, pKa, solubility and penetration time

Electroporation is an important physical technique to improve drug transdermal delivery, although its mechanism remains unclear. Here, some types of polar drugs, including aspirin, diclofenac sodium, metformin hydrochloride, ibuprofen and zidovudine, were used as the model drugs for the exploration of electroporation mechanisms. Electroporation had great influences on the structure of stratum corneum to improve the cumulative permeability due to the formation of pores maintaining for at least 2 h, depending on the power and time, and then the permeation gradually recovered to the normal value after 12 h. A mathematical model was firstly established to exhibit the relationship between the electroporation-improving cumulative permeation and the physiochemical properties of the model drugs, involving oil-water partition coefficient (logP), dissociation constant (pKa) and solubility (S). Increased cumulative permeation depended on increased S, decreased logP and pKa. Electroporation is an effective physical technique to improve transdermal drug delivery depending on itself and the properties of drugs.

Mechanistic view of skin electroporation - models and dosimetry for successful applications: an expert review

Introduction: Skin electroporation is a promising treatment for transdermal drug delivery, gene electrotransfer, skin rejuvenation, electrochemotherapy, and wound disinfection. Although a considerable amount of in vitro and in vivo studies exists, the translation to clinics is not as fast as one would hope. We hypothesize the reason lies in the inadequate dosimetry, i.e. electrode configurations, pulse parameters, and pulse generators used. We suggest adequate dosimetry can be determined by mathematical modeling which would allow comparison of protocols and facilitate translation into clinics.Areas covered: We introduce the mechanisms and applications of skin electroporation, present existing mathematical models and compare the influence of different model parameters. We review electrodes and pulse generators, prototypes, as well as commercially available models.Expert opinion: The reasons for slow translation of skin electroporation treatments into clinics lie in uncontrolled and inadequate dosimetry, poor reporting rendering comparisons between studies difficult, and significant differences in animal and human skin morphology often dismissed in reports. Mathematical models enable comparison of studies, however, when the parameters of the pulses and electrode configuration are not adequately reported, as is often the case, comparisons are difficult, if not impossible. For each skin electroporation treatment, systematic studies determining optimal parameters should be performed and treatment parameters standardized.

Advances in Ultrasound Mediated Transdermal Drug Delivery

Low frequency ultrasound-assisted drug delivery has been widely investigated as a non-invasive method to enhance the transdermal penetration of drugs. Using this technique, a brief application of ultrasound is used to permeabilize skin for a prolonged time. In this review, an overview on ultrasound is detailed to help explain the parameters that could be modulated to obtain the desired ultrasound parameters for enhanced transdermal drug delivery. The mechanisms of enhancement and the latest developments in the area of ultrasound-assisted transdermal drug delivery are discussed. Special emphasis is placed on the effects of ultrasound when used in combination with microneedles, electroporation and iontophoresis, and penetration enhancers. Further, this review summarizes the effect of ultrasound on skin integrity and the regulatory requirements for commercialization of the ultrasound based transdermal delivery instruments.

Circulation Cooling in Continuous Skin Sonoporation at Constant Coupling Fluid Temperatures

Exposure of the skin to low-frequency ultrasound in the Franz diffusion cell has been found to increase the permeability of the skin to molecular transport. In many cases, significant heating of the coupling fluid requires the use of duty cycles that extend the total experimental time. This is a methodological study in which the coupling fluid is circulated between a modified Franz diffusion cell and a heat exchanger to allow for the continuous application of low-frequency ultrasound while the coupling fluid temperature is held constant. Dermatomed porcine skin was exposed to continuous ultrasound at 20 kHz for 10 min at an intensity of 55 W/cm² while the coupling fluid was maintained at one of three target temperatures (13°C, 33°C or 46°C). Foil pitting and passive cavitation detection revealed that inertial cavitation activity decreased with increasing coupling fluid target temperature. Transport measurements revealed an increase in mean donor calcein concentration with increasing coupling fluid temperature, though these were not statistically significant. Taken together these findings suggest that the weakened stratum corneum lipid structure at higher temperatures is more susceptible to the introduction of defects from the jetting of cavitation.

A Thermoelectric Device for Coupling Fluid Temperature Regulation During Continuous Skin Sonoporation or Sonophoresis

During skin sonoporation and sonophoresis, time-consuming duty cycles or fluid replacement is often required to mitigate coupling fluid temperature increases. This study demonstrates an alternative method for temperature regulation: a circulating, thermoelectric system. Porcine skin samples were sonoporated continuously for 10 min at one of three intensities (23.8, 34.2, 39.4 W/m²). A caffeine solution was then applied to the skin and left to diffuse for 20 h. During sonoporation, the system was able to maintain the temperature between 10 and 16°C regardless of the intensity. No increase in transdermal transport was achieved with an intensity of 23.8 W/m². Intensities of 34.2 and 39.4 W/m² resulted in 3.5-fold (p < 0.05) and 3.7-fold (p < 0.05) increases in mean transport, relative to a control case with no ultrasound. From these results, it is concluded that a significant transport increase can be achieved with a system that circulates and cools the coupling fluid during ultrasound application. Relative to the previous methods of temperature control (duty cycles and fluid replacement), use of this circulation system will lead to significant time savings in future experimental studies.

Breast Cancer Cell Line Phenotype Affects Sonoporation Efficiency Under Optimal Ultrasound Microbubble Conditions

Background

Ultrasound/microbubble (USMB)-mediated sonoporation is a new strategy with minimal procedural invasiveness for targeted and site-specific drug delivery to tumors. The purpose of this study was to explore the effect of different breast cancer cell lines on sonoporation efficiency, and then to identify an optimal combination of USMB parameters to maximize the sonoporation efficiency for each tumor cell line.

Material/Methods

Three drug-sensitive breast cell lines – MCF-7, MDA-MB-231, and MDA-MB-468 – and 1 multidrug resistance (MDR) cell line – MCF-7/ADR – were chosen. An orthogonal array experimental design approach based on 3 levels of 3 parameters (A: microbubble concentration, 10%, 20%, and 30%, B: sound intensity, 0.5, 1.0, and 1.5 W/cm², C: irradiation time, 30, 60, and 90 s) was employed to optimize the sonoporation efficiency.

Results

The optimal USMB parameter combinations for different cell lines were diverse. Under optimal parameter combinations, the maximum sonoporation efficiency differences between different breast tumor cell lines were statistically significant (MDA-MB-231: 46.70±5.79%, MDA-MB-468: 53.44±5.69%, MCF-7: 59.88±5.53%, MCF-7/ADR: 65.39±4.01%, P<0.05), so were between drug-sensitive cell line and MDR cell line (MCF-7: 59.88±5.53%, MCF-7/ADR: 65.39±4.01%, p=0.026).

Conclusions

Different breast tumor cell lines have their own optimal sonoporation. Drug-resistant MCF-7/ADR cells had higher sonoporation efficiency than drug-sensitive MCF-7 cells. The molecular subtype of tumors should be considered when sonoporation is applied, and optimal parameter combination may have the potential to improve drug-delivery efficiency by increasing the sonoporation efficiency.

Touch-actuated microneedle array patch for closed-loop transdermal drug delivery

To date, only approximately 20 drugs synthesized with small molecules have been approved by the FDA for use in traditional transdermal patches (TTP) owing to the extremely low permeation rate of the skin barrier for macromolecular drugs. A novel touch-actuated microneedle array patch (TMAP) was developed for transdermal delivery of liquid macromolecular drugs. TMAP is a combination of a typical TTP and a solid microneedle array (MA). High doses of liquid drug formulations, especially heat-sensitive compounds can be easily filled and stored in the drug reservoir of TMAPs. TMAP can easily penetrate the skin and automatically retract from it to create microchannels through the stratum corneum (SC) layer using touch-actuated 'press and release' actions for passive permeation of liquid drugs. Comparison of subcutaneous injection, TTP, solid MA, and dissolvable MA, indicated that insulin-loaded TMAP exhibited the best hypoglycemic effect on type 1 diabetic rats. A 'closed-loop' permeation control was also provided for on-demand insulin delivery based on feedback of blood glucose levels (BGLs). Twenty IU-insulin-loaded TMAP maintained the type 1 diabetic rats in a normoglycemic state for approximately 11.63 h, the longest therapeutic duration among all previously reported results on microneedle-based transdermal patches. TMAP possesses excellent transdermal drug delivery capabilities.

Electrically and Ultrasonically Enhanced Transdermal Delivery of Methotrexate

In this study, we used sonophoresis and iontophoresis to enhance the in vitro delivery of methotrexate through human cadaver skin. Iontophoresis was applied for 60 min at a 0.4 mA/sq·cm current density, while low-frequency sonophoresis was applied at a 20 kHz frequency (2 min application, and 6.9 W/sq·cm intensity). The treated skin was characterized by dye binding, transepidermal water loss, skin electrical resistance, and skin temperature measurement. Both sonophoresis and iontophoresis resulted in a significant reduction in skin electrical resistance as well as a marked increase in transepidermal water loss value (p < 0.05). Furthermore, the ultrasonic waves resulted in a significant increase in skin temperature (p < 0.05). In permeation studies, the use of iontophoresis led to a significantly higher drug permeability than the untreated group (n = 4, p < 0.05). The skin became markedly more permeable to methotrexate after the treatment by sonophoresis than by iontophoresis (p < 0.01). A synergistic effect for the combined application of sonophoresis and iontophoresis was also observed. Drug distribution in the skin layers revealed a significantly higher level of methotrexate in the sonicated skin than that in iontophoresis and untreated groups. Iontophoresis and low-frequency sonophoresis were found to enhance the transdermal and intradermal delivery of methotrexate in vitro.

Effect of Ultrasound-Enhanced Transdermal Drug Delivery Efficiency of Nanoparticles and Brucine

Brucine is the active component in traditional Chinese medicine “Ma-Qian-Zi” (Strychnos nux-vomica Linn), with capabilities of analgesic, anti-inflammatory, anti-tumor and so on. It is crucial how to break through the impact of cuticle skin which reduces the penetration of drugs to improve drug transmission rate. The aim of this study is to improve the local drug concentration by using ultrasound. We used fresh porcine skin to study the effects of ultrasound on the transdermal absorption of brucine under the influence of various acoustic parameters, including frequency, amplitude and irradiation time. The transdermal conditions of yellow-green fluorescent nanoparticles and brucine in skin samples were observed by laser confocal microscopy and ultraviolet spectrophotometry. The results show that under ultrasonic conditions, the permeability of the skin to the fluorescent label and brucine (e.g., the depth and concentration of penetration) is increased compared to its passive diffusion permeability. The best ultrasound penetration can make the penetration depth of more than 110 microns, fluorescent nanoparticles and brucine concentration increased to 2-3 times. This work will provide supportive data on how the brucine is better used for transdermal drug delivery (TDD).

A solid polymer microneedle patch pretreatment enhances the permeation of drug molecules into the skin

In this work, solid microneedles (MNs) for skin pretreatment were systematically studied including MN height, density, spacing, and so on.

Recent trends in the transdermal delivery of therapeutic agents used for the management of neurodegenerative diseases

With the increasing proportion of the global geriatric population, it becomes obvious that neurodegenerative diseases will become more widespread. From an epidemiological standpoint, it is necessary to develop new therapeutic agents for the management of Alzheimer's disease, Parkinson's disease, multiple sclerosis and other neurodegenerative disorders. An important approach in this regard involves the use of the transdermal route. With transdermal drug delivery systems (TDDS), it is possible to modulate the pharmacokinetic profiles of these medications and improve patient compliance. Transdermal drug delivery has also been shown to be useful for drugs with short half-life and low or unpredictable bioavailability. In this review, several transdermal drug delivery enhancement technologies are being discussed in relation to the delivery of medications used for the management of neurodegenerative disorders.

The progressive role of acoustic cavitation for non-invasive therapies, contrast imaging and blood-tumor permeability enhancement

INTRODUCTION

Drug delivery pertaining to acoustic cavitation generated from ultrasonic (US) irradiation is advantageous for devising smarter and more advanced therapeutics. The aim is to showcase microbubbles as drug carriers and robust theranostic for non-invasive therapies across diverse biomedical disciplines, highlighting recent technologies in this field for overcoming the blood-brain barrier (BBB) to treat cancers and neurological disorders.

AREAS COVERED

This article reviews work on the optimized tuning of ultrasonic parameters, sonoporation, transdermal and responsive drug delivery, acoustic cavitation in vasculature and oncology, contrast imaging for real-time magnification of cell-microbubble dynamics and biomolecular targeting. Scholarly literature was sought through database search on key terminology, latest topics, reputable experts and established journals over the last five years.

EXPERT OPINION

Cavitation offers immense promise in overcoming current diffusion and convection limitations for treating skull/brain/vascular/tissue injuries and ablating tumors to minimize chronic/acute effects. Since stable cavitation facilitates the restoration of US-opened BBB and the modulation of drug concentration, US equipment with programmable imaging modality and sensitivity are envisaged to create safer miniaturized devices for personalized care. Due to differing biomedical protocols with regard to specific medical conditions, quantitative and qualitative controls are mandatory before translation to real-life clinical applications can be accomplished.

Perspectives on Transdermal Electroporation

Transdermal drug delivery offers several advantages, including avoidance of erratic absorption, absence of gastric irritation, painlessness, noninvasiveness, as well as improvement in patient compliance. With this mode of drug administration, there is no pre-systemic metabolism and it is possible to increase drug bioavailability and half-life. However, only a few molecules can be delivered across the skin in therapeutic quantities. This is because of the hindrance provided by the stratum corneum. Several techniques have been developed and used over the last few decades for transdermal drug delivery enhancement. These include sonophoresis, iontophoresis, microneedles, and electroporation. Electroporation, which refers to the temporary perturbation of the skin following the application of high voltage electric pulses, has been used to increase transcutaneous flux values by several research groups. In this review, transdermal electroporation is discussed and the use of the technique for percutaneous transport of low and high molecular weight compounds described. This review also examines our current knowledge regarding the mechanisms of electroporation and safety concerns arising from the use of this transdermal drug delivery technique. Safety considerations are especially important because electroporation utilizes high voltage pulses which may have deleterious effects in some cases.