Prediction of dexamethasone release from PLGA microspheres prepared with polymer blends using a design of experiment approach

Acceleration of Final Residual Solvent Extraction From Poly(lactide-co-glycolide) Microparticles

PURPOSE

The removal of the residual solvent dichloromethane from biodegradable poly(D,L-lactic-co-glycolic acid) (PLGA) microparticles was investigated by aqueous or alcoholic wet extraction or vacuum-drying.

METHODS

Microparticles were prepared by the O/W solvent extraction/evaporation method. The solidified microparticles were separated by filtration and the effect of subsequent drying and wet extraction methods were investigated. The residual solvent content was analysed with gas chromatography (organic solvents) and Karl Fischer titration (water). The effect of extraction conditions on microparticle aggregation, surface morphology and encapsulation of the drugs dexamethasone and risperidone was investigated.

RESULTS

Residual dichloromethane was reduced to 2.43% (w/w) (20 °C) or 0.03% (w/w) (35 °C) by aqueous wet extraction. With vacuum-drying, residual dichloromethane only decreased from about 5% (w/w) to 4.34% (w/w) (20 °C) or 3.20% (w/w) (35 °C) due to the lack of the plasticizing effect of water. Redispersion of filtered, wet microparticles in alcoholic media significantly improved the extraction due to an increased PLGA plasticization. The potential of different extractants was explained with the Gordon-Taylor equation and Hansen solubility parameters. Extraction in methanol: or ethanol:water mixtures reduced residual dichloromethane from 4 - 7% (w/w) to 0.5 - 2.3% (w/w) within 1 h and 0.08 - 0.18% (w/w) within 6 h. Higher alcohol contents and higher temperature resulted in aggregation of microparticles and lower drug loadings.

CONCLUSION

The final removal of residual dichloromethane was more efficient with alcoholic wet extraction followed by aqueous wet extraction at elevated temperature and vacuum drying of the microparticles.

Optimizing Process Parameters for Controlled Drug Delivery: A Quality by Design (QbD) Approach in Naltrexone Microspheres

The formulation of microspheres involves a complex manufacturing process with multiple steps. Identifying the appropriate process parameters to achieve the desired quality attributes poses a significant challenge. This study aims to optimize the critical process parameters (CPPs) involved in the preparation of naltrexone microspheres using a Quality by Design (QbD) methodology. Additionally, the research aims to assess the drug release profiles of these microspheres under both in vivo and in vitro conditions. Critical process parameters (CPPs) and critical quality attributes (CQAs) were identified, and a Box-Behnken design was utilized to delineate the design space, ensuring alignment with the desired Quality Target Product Profile (QTPP). The investigated CPPs comprised polymer concentration, aqueous phase ratio to organic phase ratio, and quench volume. The microspheres were fabricated using the oil-in-water emulsion solvent extraction technique. Analysis revealed that increased polymer concentration was correlated with decreased particle size, reduced quench volume resulted in decreased burst release, and a heightened aqueous phase ratio to organic phase ratio improved drug entrapment. Upon analyzing the results, an optimal formulation was determined. In conclusion, the study conducted in vivo drug release testing on both the commercially available innovator product and the optimized test product utilizing an animal model. The integration of in vitro dissolution data with in vivo assessments presents a holistic understanding of drug release dynamics. The QbD approach-based optimization of CPPs furnishes informed guidance for the development of generic pharmaceutical formulations.

Latest advances: Improving the anti-inflammatory and immunomodulatory properties of PEEK materials

Excellent biocompatibility, mechanical properties, chemical stability, and elastic modulus close to bone tissue make polyetheretherketone (PEEK) a promising orthopedic implant material. However, biological inertness has hindered the clinical applications of PEEK. The immune responses and inflammatory reactions after implantation would interfere with the osteogenic process. Eventually, the proliferation of fibrous tissue and the formation of fibrous capsules would result in a loose connection between PEEK and bone, leading to implantation failure. Previous studies focused on improving the osteogenic properties and antibacterial ability of PEEK with various modification techniques. However, few studies have been conducted on the immunomodulatory capacity of PEEK. New clinical applications and advances in processing technology, research, and reports on the immunomodulatory capacity of PEEK have received increasing attention in recent years. Researchers have designed numerous modification techniques, including drug delivery systems, surface chemical modifications, and surface porous treatments, to modulate the post-implantation immune response to address the regulatory factors of the mechanism. These studies provide essential ideas and technical preconditions for the development and research of the next generation of PEEK biological implant materials. This paper summarizes the mechanism by which the immune response after PEEK implantation leads to fibrous capsule formation; it also focuses on modification techniques to improve the anti-inflammatory and immunomodulatory abilities of PEEK. We also discuss the limitations of the existing modification techniques and present the corresponding future perspectives.

Transscleral Delivery of Dexamethasone-Loaded Microparticles Using a Dissolving Microneedle Array

Microneedles (MNs) have attracted considerable interest as a means of ocular drug delivery, a challenging delivery route due to the limitations imposed by the various biological barriers associated with this organ. In this study, a novel ocular drug delivery system was developed by formulating a dissolvable MN array containing dexamethasone-loaded PLGA microparticles for scleral drug deposition. The microparticles serve as a drug reservoir for controlled transscleral delivery. The MNs displayed sufficient mechanical strength to penetrate the porcine sclera. Dexamethasone (Dex) scleral permeation was significantly higher than in topically instilled dosage forms. The MN system was able to distribute the drug through the ocular globe, with 19.2% of the administered Dex detected in the vitreous humour. Additionally, images of the sectioned sclera confirmed the diffusion of fluorescent-labelled microparticles within the scleral matrix. The system therefore represents a potential approach for minimally invasive Dex delivery to the posterior of the eye, which lends itself to self-administration and hence high patient convenience.

Localized Microsphere/Hydrogel for Tumor Immunotherapy of Cardiac Glycoside with Minimal Toxicity

It has been reported that cardiac glycosides (CGs) commonly used in clinical practice can inhibit tumor growth by inducing immunogenic cell death (ICD), and their positive benefits have been documented in several clinical trials of drug combinations. However, the inherent cardiogenic side effects need to be addressed before CGs can be truly applied in clinical antitumor therapy. In this study, a dual controlled release microsphere/hydrogel platform (OL-M/Gel) was constructed to precisely control the output of oleandrin (OL, one of the representative CGs) in situ in tumors. With the help of this intelligent drug release platform, OL can be released in vitro and in vivo in a sustained and stable manner. The ability of OL to induce ICD and the subsequent antigen presentation and cytotoxic T-cell cascades was first stated, which resulted in potent tumor growth suppression without significant side effects. In addition, the inhibition of autologous tumor recurrence and metastasis by OL-M/Gel was also revealed. This study is expected to break through the inherent bottleneck of CGs and promote their clinical transformation in the field of antitumor treatment.

Preparation and characterization of morphine gelatine microspheres

Morphine is a widely used opioid analgesic. However, standard morphine dosages and administration methods exhibit a short half-life and pose a risk of respiratory depression. Sustained-release microspheres can deliver prolonged efficacy and reduce side effects. We present a new controlled-release morphine gelatine microsphere (MGM) prepared using an emulsification-crosslinking strategy. The gelatine microsphere design improves the bioavailability of morphine. And it not only increases the clinical analgesic efficacy but also the safety of clinical medication through a gradual, sustained release. Besides, we describe MGMs' preparation, release, pharmacodynamics, and pharmacokinetics. And the drug metabolism pathway. We calculate the release rate of morphine by measuring plasma morphine concentration over time and pharmacokinetic parameters. It optimized the manufacturing process of MGMs, which makes the analgesic effect have a longer duration. MGMs analgesic effect shows dose dependence. After they were administrated, MGMs were released more slowly. Peak concentration was reduced, and the relative bioavailability improved. It even reached 88.84%. Its pharmacokinetic process was consistent with the two-component first-order absorption model. MGMs deliver sustained-release and long-action pharmacokinetics. It shows design goals of improving drug bioavailability, prolonging drug residence time in vivo, and maintaining stable blood drug concentration.

Ultrahigh efficient emulsification with drag-reducing liquid gating interfacial behavior

Emulsification is a crucial technique for mixing immiscible liquids into droplets in numerous areas ranging from food to medicine to chemical synthesis. Commercial emulsification methods are promising for high production, but suffer from high energy input. Here, we report a very simple and scalable emulsification method that employs the drag-reducing liquid gating structure to create a smooth liquid-liquid interface for the reduction of resistance and tunable generation of droplets with good uniformity. Theoretical modeling and experimental results demonstrate that our method exhibits ultrahigh efficiency, which can reach up to more than 4 orders of magnitude greater energy-saving compared to commercial methods. For temperature-sensitive biological components, such as enzymes, proteins, and bacteria, it can offer a comfortable environment to avoid exposure to high temperatures during emulsifying, and the interface also enables the suppression of fouling. This unique drag-reducing liquid gating interfacial emulsification mechanism promotes the efficiency of droplet generation and provides fresh insight into the innovation of emulsifications that can be applied in many fields, including the food industry, the daily chemical industry, biomedicine, material fabrication, the petrochemical industry, and beyond.

Dexamethasone-Loaded biodegradable magnetic microparticles for treatment of CFA-induced chronic pain in rats

Traditional drug solutions or suspensions, have been shown to treat pain in complete Freund’s adjuvant (CFA)-induced chronic inflammatory pain in rats, with or without combination with magnetic therapy. In this study, we aimed to prepare, characterize, and evaluate the therapeutic effects of microparticles containing dexamethasone for local administration and treatment of chronic inflammatory pain. The results showed the following; a) Preparation and characterization: two ratios of poly(lactic-co-glycolic acid) (PLGA)/poly(lactic acid) (PLA) were used. The prepared batches were similar in size and magnetic responsiveness. The microparticle size distribution assessed via electron microscopy suggested a homogeneous distribution and absence of aggregates. Dexamethasone release profiles (microparticles synthesized with a feed ratio of 1:4) showed a sustained release in vitro and good biocompatibility with tissues. b) Therapeutic effect: the treatment effect of dexamethasone-PLGA magnetic microspheres + magnetic therapy was substantially better than that observed for other groups on day 4, as monitored by appearance, mechanical pain threshold, and histological analysis. This type of carrier could be a suitable magnetically retainable local drug delivery system for treating chronic pain.

Dexamethasone: Insights into Pharmacological Aspects, Therapeutic Mechanisms, and Delivery Systems

Dexamethasone (DEX) has been widely used to treat a variety of diseases, including autoimmune diseases, allergies, ocular disorders, cancer, and, more recently, COVID-19. However, DEX usage is often restricted in the clinic due to its poor water solubility. When administered through a systemic route, it can elicit severe side effects, such as hypertension, peptic ulcers, hyperglycemia, and hydro-electrolytic disorders. There is currently much interest in developing efficient DEX-loaded nanoformulations that ameliorate adverse disease effects inhibiting advancements in scientific research. Various nanoparticles have been developed to selectively deliver drugs without destroying healthy cells or organs in recent years. In the present review, we have summarized some of the most attractive applications of DEX-loaded delivery systems, including liposomes, polymers, hydrogels, nanofibers, silica, calcium phosphate, and hydroxyapatite. This review provides our readers with a broad spectrum of nanomedicine approaches to deliver DEX safely.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Biomarker monitoring and long-acting insulin treatment in a stress model to facilitate personalized diabetic control

Diabetes is a chronic disease involving elevated blood glucose levels. Controlled insulin delivery is an ideal method to achieve glycemic control. However, glucose levels vary as a result of changes in the body's physiological conditions resulting from different daily events, such as meals, exercise and stress. It is essential to develop and to monitor appropriate biomarkers for these natural physiological perturbations in order to achieve a holistic understanding of metabolic changes in diabetic patients to facilitate optimal glucose management and make possible personalized medicine for this very debilitating disease. The novel aspects of the current research include the combination of the tail suspension stress animal model and microdialysis for stress biomarker monitoring. A tail suspension test was optimized and used as a stress inducer for different groups of model rats (normal, untreated diabetic and insulin-treated diabetic rats). The levels of multiple metabolic analytes in the subcutaneous tissue were monitored continuously using subcutaneous microdialysis analysis. Different analytes, including pH, glucose and lactate were monitored and analyzed. Another important and original aspect of the reported work is that revelation that the pH, lactate and glucose levels increased under the stress conditions and the changes tended to be more pronounced in diabetic rats (both untreated and long-acting insulin-treated) compared to normal rats. Long-acting insulin treatment was shown to shorten the duration of the pH and glucose changes in response to stress when compared to the untreated diabetic rats. An additional novel aspect of the research is that subcutaneous pH was shown to be a sensitive stress biomarker for diabetic rats as pH changes rapidly after stress initiation. This research provides insight into the importance of accurate glycemic control and diabetes management for individual patients through highlighting stress management and appropriate biomarker monitoring, especially the value of combining pH and lactate monitoring with typical glucose monitoring. This research will pave the way for individualized medicine for diabetic patients through helping to obtain a holistic understanding of the various important biomarkers, rather than solely depending on glucose monitoring to determine appropriate insulin dosing.

Polymeric microparticle systems for modified release of glucagon-like-peptide-1 receptor agonists

Type 2 diabetes is a fast-growing worldwide epidemic. Despite the multiple therapies available to treat type 2 diabetes, the disease is not correctly managed in over half of patients, mainly due to non-compliance with prescribed treatment regimes. The development of analogues to the glucagon-like peptide 1 (GLP-1) has resulted in the extension of its half-life and associated benefits. Further benefits in the use of peptide-based GLP-1 receptor agonists have been achieved by the use of controlled-release systems based on polymeric microparticles. In this review, we focus on commercially available formulations and others that remain in development, discussing the preparation methods and the relationship between in vitro and in vivo kinetic release behaviours.

The effect of polymer blends on initial release regulation and in vitro-in vivo relationship of peptides loaded PLGA-Hydrogel Microspheres

The aim of this study was to resolve the lag time problem for peptides loaded PLGA-Hydrogel Microspheres (PLGA-gel-Ms) by blending low molecular PLGA (Mw. 1 kDa) into PLGA (Mw. 10 kDa) as an intrinsic porogen, and then assess the in vitro-in vivo relationship (IVIVR). Here, Goserelin acetate (GOS) was chosen as the model peptides. When compared to additional types of porogen, the intrinsic porogen avoided impurities remaining and protected the bioactivities of the peptides. By adding 10% PLGA (Mw. 1 kDa), the lag time was eliminated both in vitro and in vivo with a desirable EE (97.04% ± 0.51%). The release mechanisms were found to be: a) initial GOS release mainly controlled by pores diffusion and b) autocatalysis of PLGA (Mw. 1 kDa) which increased the quantity of aqueous pores, as revealed by SEM images. To solve the challenges caused by multiphasic release profiles, for the first time the Segmented phases IVIVR were proposed and developed, and showed improved linear fitting effects and supported the proposed release mechanisms. The application of PLGA blends could provide a new insight into PLGA microsphere initial release rate regulation.

Sustained delivery of 17β-estradiol by human amniotic extracellular matrix (HAECM) scaffold integrated with PLGA microspheres for endometrium regeneration

The endometrial injury usually results in intrauterine adhesions (IUAs). However, there is no effective treatment to promote the regeneration of the endometrium currently. The decellularized amnion membrane (AM) is a promising material in human tissue repair and regeneration due to its biocompatibility, biodegradability, as well as the preservation of abundant bioactive components. Here, an innovative drug-delivering system based on human amniotic extracellular matrix (HAECM) scaffolds were developed to facilitate endometrium regeneration. The 17β-estradiol (E2) loaded PLGA microspheres (E2-MS) were well dispersed in the scaffolds without altering their high porosity. E2 released from E2-MS-HAECM scaffolds in vitro showed a decreased initial burst release followed with a sustained release for 21 days, which coincided with the female menstrual cycle. Results of cell proliferation suggested E2-MS-HAECM scaffolds had good biocompatibility and provided more biologic guidance of endometrial cell proliferation except for mechanical supports. Additionally, the mRNA expression of growth factors in endometrial cells indicated that HAECM scaffolds could upregulate the expression of EGF and IGF-1 to achieve endometrium regeneration. Therefore, these advantages provide the drug-loaded bioactive scaffolds with new choices for the treatments of IUAs.

Development and Statistical Optimization of Solid Lipid Nanoparticle Formulations of Fluticasone Propionate

OBJECTIVES

The aim of this study was to develop fluticasone propionate (FP)-loaded solid lipid nanoparticle (SLN) formulations by using factorial design approach.

MATERIALS AND METHODS

Tristearin percentages (X1) (1%, 2%, and 4%) and homogenization cycles (X2) (2, 4, and 8 cycles) were selected as independent variables in the factorial design. SLN formulations were optimized by multiple linear regression (MLR) to evaluate the influence of the selected process and formulation independent variables on SLNs' characteristics, namely as encapsulation efficiency (Q1) and particle size (Q2). The polydispersity index and surface charge of the SLNs were also evaluated in this research. Moreover, transmission electron microscopy, differential scanning calorimetry, and in vitro drug release studies were carried out on the optimum SLN formulation.

RESULTS

The MLR analysis indicated that as the homogenization cycle (X2) increased in the production process, the mean particle size decreased.

CONCLUSION

This research showed that FP-encapsulated SLNs with desired characteristics can be produced by varying the production and content variables of the formulations.

Quality by design thinking in the development of long-acting injectable PLGA/PLA-based microspheres for peptide and protein drug delivery

Adopting the Quality by Design (QbD) approach in the drug development process has transformed from "nice-to-do" into a crucial and required part of the development, ensuring the quality of pharmaceutical products throughout their whole life cycles. This review is discussing the implementation of the QbD thinking into the production of long-acting injectable (LAI) PLGA/PLA-based microspheres for the therapeutic peptide and protein drug delivery. Various key elements of the QbD approaches are initially elaborated using Bydureon®, a commercial product of LAI PLGA/PLA-based microspheres, as a classical example. Subsequently, the factors influencing the release patterns and the stability of the peptide and protein drugs are discussed. This is followed by a summary of the state-of-the-art of manufacturing LAI PLGA/PLA-based microspheres and the related critical process parameters (CPPs). Finally, a landscape of generic product development of LAI PLGA/PLA-based microspheres is reviewed including some major challenges in the field.

Modulation of protein release from penta-block copolymer microspheres

Releasing a protein according to a zero-order profile without protein denaturation during the polymeric microparticle degradation process is very challenging. The aim of the current study was to develop protein-loaded microspheres with new PLGA based penta-block copolymers for a linear sustained protein release. Lysozyme was chosen as model protein and 40 µm microspheres were prepared using the solid-in-oil-in-water solvent extraction/evaporation process. Two types of PLGA-P188-PLGA penta-block copolymers were synthetized with two PLGA-segments molecular weight (20 kDa or 40 kDa). The resulting microspheres (50P20-MS and 50P40-MS) had the same size, an encapsulation efficiency around 50-60% but different porosities. Their protein release profiles were complementary: linear but non complete for 50P40-MS, non linear but complete for 50P20-MS. Two strategies, polymer blending and microsphere mixing, were considered to match the release to the desired profile. The (1:1) microsphere mixture was successful. It induced a bi-phasic release with a moderate initial burst (around 13%) followed by a nearly complete linear release for 8 weeks. This study highlighted the potential of this penta-block polymer where the PEO block mass ratio influence clearly the Tg and consequently the microsphere structure and the release behavior at 37 °C. The (1:1) mixture was a starting point but could be finely tuned to control the protein release.

Proton Oriented-"Smart Depot" for Responsive Release of Ca2+ to Inhibit Peptide Acylation in PLGA Microspheres

PURPOSE

The purpose of this study was to characterize and detail the mechanism of a smart Ca²⁺ release depot (Ca₃(PO₄)₂) about its ability for sustainable inhibition on peptide acylation within PLGA microspheres.

METHODS

The octreotide acetate release and acylation kinetics were analyzed by RP-HPLC. Changes of Ca²⁺ concentration and adsorption behavior were determined by a Calcium Colorimetric Assay Kit. The inner pH changes were delineated by a classic pH sensitive probe, Lysosensor yellow/ blue® dextran. Morphological changes of microspheres, adsorption between polymer and additive, transformation of Ca₃(PO₄)₂ were characterized using SEM, FTIR and SSNMR separately.

RESULTS

Before and after microspheres formulation, the property and effectiveness of Ca₃(PO₄)₂ were investigated. Compared with a commonly used calcium salt (CaCl₂), high encapsulation efficiency (96.56%) of Ca₃(PO₄)₂ guarantees lasting effectiveness. In an increasingly acidic environment that simulated polymer degradation, the poorly water-soluble Ca₃(PO₄)₂ could absorb protons and transform into the more and more soluble CaHPO₄ and Ca(H₂PO₄)₂ to produce sufficient Ca²⁺ according to severity of acylation. The corresponding Ca²⁺ produce capacity fully met the optimum inhibition requirement since the real-time adsorption sites (water-soluble carboxylic acids) inside the degrading microspheres were rare. A sustained retention of three switchable calcium salts and slow release of Ca²⁺ were observed during the microsphere incubation. FTIR results confirmed the long-term inhibition effect induced by Ca₃(PO₄)₂ on the adsorption between drug and polymer.

CONCLUSIONS

With the presence of the smart Ca²⁺ depot (Ca₃(PO₄)₂) in the microspheres, a sustainable and long-term inhibition of peptide acylation was achieved.

Entecavir-loaded poly (lactic-co-glycolic acid) microspheres for long-term therapy of chronic hepatitis-B: Preparation and in vitro and in vivo evaluation

To avoid severe exacerbations in the load of hepatitis B virus (HBV) as a consequence of discontinuous use of anti-HBV drugs, entecavir (ETV), the first-line anti-HBV drug, was primally formulated as extended-release poly (lactic-co-glycolic acid) microspheres in the present study. Because ETV is slightly soluble in water and in some other organic solvents used for microsphere preparation, methods for solid-microencapsulation were employed to fabricate the ETV microspheres. The optimized microspheres were evaluated for their morphology, particle size, drug loading, in vitro drug release, and in vivo pharmacokinetics in rats. The optimized formulation was found to have a mean particle size of 86 µm and drug loading of 13%. Differential scanning calorimetry and powder X-ray diffraction indicated that ETV existed in crystal, amorphous, and molecular states in the microspheres. In vitro and in vivo release revealed that the dissolution of ETV dominated the release process. The morphology of the microspheres and changes in the morphology during in vitro release were assessed by scanning electron microscopy. The novel ETV-MS described in this study should have great potential for clinical use as an alternative treatment against HBV.

Comprehensive control over molecular weight distributions through automated polymerizations

Automated synthesis by mixing of individual polymer distributions to tune the shape and properties of artificial molecular weight distributions.

Optimization of self-microemulsifying drug delivery system for phospholipid complex of telmisartan using D-optimal mixture design

To improve the dissolution behavior of telmisartan (TMS), a poorly water-soluble angiotensin II receptor blocker, TMS-phospholipid complex (TPC) was prepared by solvent evaporation method and characterized by differential scanning calorimetry and powder X-ray diffractometry. The crystalline structure of TMS was transited into an amorphous state by TPC formation. The equilibrium solubility of TPC (1.3-6.1 mg/mL) in various vehicles was about 100 times higher than that of TMS (0.009-0.058 mg/mL). TPC-loaded self-microemulsifying drug delivery system (SMEDDS) formulation was optimized using the D-optimal mixture design with the composition of 14% Capryol 90 (oil; X1), 59.9% tween 80 (surfactant; X2), and 26.1% tetraglycol (cosurfactant; X3) as independent variables, which resulted in a droplet size of 22.17 nm (Y1), TMS solubilization of 4.06 mg/mL (Y2), and 99.4% drug release in 15 min (Y3) as response factors. The desirability function value was 0.854, indicating the reliability and accuracy of optimization; in addition, good agreement was found between the model prediction and experimental values of Y1, Y2, and Y3. Dissolution of raw TMS was poor and pH-dependent, where it had extremely low dissolution (< 1% for 2 h) in water, pH 4, and pH 6.8 media; however, it showed fast and high dissolution (> 90% in 5 min) in pH 1.2 medium. In contrast, the dissolution of the optimized TPC-loaded SMEDDS was pH-independent and reached over 90% within 5 min in all the media tested. Thus, we suggested that phospholipid complex formation and SMEDDS formulation using the experimental design method might be a promising approach to enhance the dissolution of poorly soluble drugs.

PLGA microsphere/PVA hydrogel coatings suppress the foreign body reaction for 6 months

The application of dexamethasone releasing poly (lactic-co-glycolic acid) (PLGA) microspheres embedded in a poly vinyl alcohol (PVA) hydrogel coatings have been successfully used in the suppression of the foreign body response (FBR) to implantable glucose sensors. In the current study, dexamethasone-loaded PLGA microspheres were prepared by blending two types of PLGA polymers (RG503H and DLG7E with MW of ca. 25 kDa and 113 kDa, respectively) to achieve long-term (6 months) inhibition of the FBR. The microsphere composition was optimized according to the in vitro drug release profiles. Microspheres with DLG7E/RG503H/dexamethasone = 70/13.3/16.7 wt% composition, when embedded in a PVA hydrogel, provided a continuous drug release for 6 months. By combining the aforementioned microspheres with microspheres composed solely of the DLG7E polymer within a similar PVA hydrogel realized an even longer (>7 months) in vitro drug release. A heat map was constructed to depict the daily in vitro drug released and elucidate possible lag phases that could affect the pharmacodynamic response. These drug-loaded implant coatings were investigated in vivo (rat model) and showed inhibition of the foreign body response for 6 months. These results suggest that the minimum effective daily dose to counter chronic inflammation is ca. 0.1 μg per mg of coating surrounding a 0.5 × 0.5 × 5 mm silicon implant (dummy sensor). Accordingly, these drug-eluting composite coatings can ensure long-term inflammation control for miniaturized implantable devices.

A reformative shear precipitation procedure for the fabrication of vancomycin-loaded poly(lactide-co-glycolide) microspheres

This study reports the encapsulation of vancomycin, as a model hydrophilic drug, into poly(lactide-co-glycolide) microspheres using a novel reformative shear precipitation procedure. In contrast to the external aqueous phase used in the conventional microencapsulation technique based on emulsion solvent evaporation/extraction, the reformative shear precipitation procedure explored in this study uses a shear medium composed of glycerol as the viscous medium and ethanol as polymer antisolvent, which is relatively immiscible with the hydrophilic drug. This limits drug diffusion and leads to rapid microsphere solidification, which allows a large proportion of the hydrophilic drug to be encapsulated within the microspheres. The influence of various processing parameters, including polymer concentration, volume ratio of ethanol to glycerol in the shear medium, volume of aqueous drug solution, initial drug loading, and injecting rate of the drug-polymer emulsion, on the encapsulation efficiency and characteristics of resulting microspheres were investigated. The morphology and release characteristics, as well as mechanical, in vitro and in vivo behaviour of vancomycin-loaded poly(lactide-co-glycolide) microspheres prepared using the novel procedure were also investigated. The results demonstrated that the reformative shear precipitation procedure could achieve the loading of hydrophilic drugs into poly(lactide-co-glycolide) microspheres with high encapsulation efficiency, and the success of the procedure was largely influenced by the volume ratio of ethanol to glycerol in the shear medium. Vancomycin-loaded poly(lactide-co-glycolide) microspheres prepared using this procedure demonstrated favourable mechanical characteristics, antibacterial activity, and in vivo degradation behaviour which suggested their suitability for use as a sustained delivery system.

Preparation, Optimization and Toxicity Evaluation of (SPION-PLGA) ±PEG Nanoparticles Loaded with Gemcitabine as a Multifunctional Nanoparticle for Therapeutic and Diagnostic Applications

The aim of this study was to develop a novel multifunctional nanoparticle, which encapsulates SPION and Gemcitabine in PLGA ± PEG to form multifunctional drug delivery system. For this aim, super paramagnetic iron oxide nanoparticles (SPIONs) were simultaneously synthesized and encapsulated with Gemcitabine (Gem) in PLGA ± PEG copolymers via W/O/W double emulsification method. Optimum size and encapsulation efficiency for radiosensitization, hyperthermia and diagnostic applications were considered and the preparation parameters systematically were investigated and physicochemical characteristics of optimized nanoparticle were studied. Then SPION-PLGA and PLGA-Gem nanoparticles were prepared with the same optimized parameters and the toxicity of these nanoparticles was compared with Gemcitabine in human breast cancer cell line (MCF-7). The optimum preparation parameters were obtained with Gem/polymer equal to 0.04, SPION/polymer equal to 0.8 and 1% sucrose per 20 mg of polymer. The hydrodynamic diameters of all nanoparticles were under 200 nm. Encapsulation efficiency was adjusted between 13.2% to 16.1% for Gemcitabine and 48.2% to 50.1% for SPION. In-vitro Gemcitabine release kinetics had controlled behavior. Enhancement ratios for PLGA-Gem and SPION-PLGA-Gem at concentration of nanoparticles equal to IC50 of Gemcitabine were 1.53 and 1.89 respectively. The statistical difference was significant (p-value = 0.006 for SPION-PLGA-Gem and p-value = 0.015 for PLGA-Gem compared with Gemcitabine). In conclusion, we have successfully developed a Gemcitabine loaded super paramagnetic PLGA-Iron Oxide multifunctional drag delivery system. Future work includes in-vitro and in-vivo investigation of radiosensitization and other application of these nanoparticles.

Control-released basic fibroblast growth factor-loaded poly-lactic-co-glycolic acid microspheres promote sciatic nerve regeneration in rats

Although peripheral nerve injury may result in a loss of function in innervated areas, the most effective method for nerve regeneration remains to be determined. The aim of the present study was to investigate the effect of control-released basic fibroblast growth factor (bFGF)-loaded poly-lactic-co-glycolic acid (PLGA) microspheres on sciatic nerve regeneration following injury in rats. bFGF-PLGA microspheres were prepared and their characteristics were evaluated. The sciatic nerve was segmentally resected to create a 10 mm defect in 36 Sprague Dawley (SD) rats and, following the anastomosis of the nerve ends with a silicone tube, bFGF-PLGA microspheres, free bFGF or PBS were injected into the tube (n=12 in each group). The outcome of nerve regeneration was evaluated using the sciatic function index (SFI), electrophysiological test and histological staining at 6 weeks and 12 weeks post-surgery. The bFGF-PLGA microspheres were successfully synthesized with an encapsulation efficiency of 66.43%. The recovery of SFI and electrophysiological values were significantly greater (P<0.05), and morphological and histological observations were significantly greater (P<0.05) in bFGF-PLGA microspheres and bFGF groups compared with those in the PBS group, and the quickest recovery was observed in the bFGF-PLGA microspheres group. In conclusion, the bFGF-PLGA microspheres may promote nerve regeneration and functional recovery in the sciatic nerve, and may have potential therapeutic applications in peripheral nerve regeneration.

Pharmaceutical technology can turn a traditional drug, dexamethasone into a first-line ocular medicine. A global perspective and future trends

Dexamethasone is one of the most prescribed glucocorticoids. It is effective and safe in the treatment of a wide variety of ocular conditions, including anterior and posterior segment inflammation. However, its half-life in the vitreous humor is very short, which means that it typically requires frequent administrations, thus reducing patient adherence and causing therapeutic failure. Innovative dexamethasone delivery systems have been designed in an attempt to achieve sustained release and targeting. The FDA has approved dexamethasone implants for the treatment of macular edema secondary to retinal vein occlusion and posterior segment noninfectious uveitis. Lenses, micro- and nanoparticles, liposomes, micelles and dendrimers are also proving to be adequate systems for maintaining optimal dexamethasone levels in the site of action. Pharmaceutical technology is turning a classical drug, dexamethasone, into a fashionable medicine.

Seeing is believing, PLGA microsphere degradation revealed in PLGA microsphere/PVA hydrogel composites

The aim of this study was to understand the polymer degradation and drug release mechanism from PLGA microspheres embedded in a PVA hydrogel. Two types of microspheres were prepared with different molecular weight PLGA polymers (approximately 25 and 7 kDa) to achieve different drug release profiles, with a 9-day lag phase and without a lag phase, respectively. The kinetics of water uptake into the microspheres coincided with the drug release profiles for both formulations. For the 25 kDa microspheres, minimal water uptake was observed in the early part of the lag phase followed by substantial water uptake at the later stages and in the drug release phase. For the 7 kDa microspheres, water uptake occurred simultaneously with drug release. Water uptake was approximately 2-3 times that of the initial microsphere weight for both formulations. The internal structure of the PLGA microspheres was evaluated using low temperature scanning electron microscopy (cryo-SEM). Burst drug release occurred followed by pore forming from the exterior to the core of both microspheres. A well-defined hydrogel/microsphere interface was observed. For the 25 kDa microspheres, internal pore formation and swelling occurred before the second drug release phase. The surface layer of the microspheres remained intact whereas swelling, and degradation of the core continued throughout the drug release period. In addition, microsphere swelling reduced glucose transport through the coatings in PBS media and this was considered to be a as a consequence of the increased thickness of the coatings. The combination of the swelling and microdialysis results provides a fresh understanding on the competing processes affecting molecular transport of bioanalytes (i.e. glucose) through these composite coatings during prolonged exposure in PBS.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed.

In vitro and in vivo performance of dexamethasone loaded PLGA microspheres prepared using polymer blends

The foreign body reaction is the major cause of the dysfunction and relatively short lifetime associated with implanted glucose biosensors. An effective strategy to maintain sensor functionality is to apply biocompatible coatings that elute drug to counter the negative tissue reactions. This has been achieved using dexamethasone releasing poly(lactic-co-glycolic acid) (PLGA) microspheres embedded in a polyvinyl alcohol (PVA) hydrogel coating. Accordingly, the biosensor lifetime relies on the duration and dose of drug release from the coating. To achieve long-term drug release mixed populations of microspheres have been used. In the current study, microspheres were prepared by blending low (25KDa) and high (113KDa) molecular weight PLGA at different mass ratios to overcome problems associated with mixing multiple populations of microspheres. "Real-time" in vitro studies demonstrated dexamethasone release for approximately 5 months. An accelerated method with discriminatory ability was developed to shorten drug release to less than 2 weeks. An in vivo pharmacodynamics study demonstrated efficacy against the foreign body reaction for 4.5 months. Such composite coatings composed of PLGA microspheres prepared using polymer blends could potentially be used to ensure long-term performance of glucose sensors.