A method for grindability testing using the Scirocco disperser

Role of Crystal Disorder and Mechanoactivation in Solid-State Stability of Pharmaceuticals

Common energy-intensive processes applied in oral solid dosage development, such as milling, sieving, blending, compaction, etc. generate particles with surface and bulk crystal disorder. An intriguing aspect of the generated crystal disorder is its evolution and repercussion on the physical- and chemical stabilities of drugs. In this review, we firstly examine the existing literature on crystal disorder and its implications on solid-state stability of pharmaceuticals. Secondly, we discuss the key aspects related to the generation and evolution of crystal disorder, dynamics of the disordered/amorphous phase, analytical techniques to measure/quantify them, and approaches to model the disordering propensity from first principles. The main objective of this compilation is to provide special impetus to predict or model the chemical degradation(s) resulting from processing-induced manifestation in bulk solid manufacturing. Finally, a generic workflow is proposed that can be useful to investigate the relevance of crystal disorder on the degradation of pharmaceuticals during stability studies. The present review will cater to the requirements for developing physically- and chemically stable drugs, thereby enabling early and rational decision-making during candidate screening and in assessing degradation risks associated with formulations and processing.

Understanding stress-induced disorder and breakage in organic crystals: beyond crystal structure anisotropy

Crystal engineering has advanced the strategies for design and synthesis of organic solids with the main focus being on customising the properties of the materials. Research in this area has a significant impact on large-scale manufacturing, as industrial processes may lead to the deterioration of such properties due to stress-induced transformations and breakage. In this work, we investigate the mechanical properties of structurally related labile multicomponent solids of carbamazepine (CBZ), namely the dihydrate (CBZ·2H2O), a cocrystal of CBZ with 1,4-benzoquinone (2CBZ·BZQ) and the solvates with formamide and 1,4-dioxane (CBZ·FORM and 2CBZ·DIOX, respectively). The effect of factors that are external (e.g. impact stressing) and/or internal (e.g. phase transformations and thermal motion) to the crystals are evaluated. In comparison to the other CBZ multicomponent crystal forms, CBZ·2H2O crystals tolerate less stress and are more susceptible to breakage. It is shown that this poor resistance to fracture may be a consequence of the packing of CBZ molecules and the orientation of the principal molecular axes in the structure relative to the cleavage plane. It is concluded, however, that the CBZ lattice alone is not accountable for the formation of cracks in the crystals of CBZ·2H2O. The strength and the temperature-dependence of electrostatic interactions, such as hydrogen bonds between CBZ and coformer, appear to influence the levels of stress to which the crystals are subjected that lead to fracture. Our findings show that the appropriate selection of coformer in multicomponent crystal forms, targetting superior mechanical properties, needs to account for the intrinsic stress generated by molecular vibrations and not solely by crystal anisotropy. Structural defects within the crystal lattice, although highly influenced by the crystallisation conditions and which are especially difficult to control in organic solids, may also affect breakage.

Particle breakability assessment using an Aero S disperser

Milling is widely used in various industries to tailor the particle size distribution for desired attributes. The ability to predict milling behaviour by testing the breakability of a small quantity of material is of great interest. In this paper, a widely available aerodynamic dispersion method, i.e. the Aero S disperser of Malvern Mastersizer 3000 has been evaluated for this purpose. This device is commonly used for dispersion of fine and cohesive powders, as the particles are accelerated and impacted at a bend, but here its use for assessing particle breakability is explored. The fluid flow field is modelled using one-way coupled Computational Fluid Dynamics approach, as the particle concentration is low, following which the particle impact velocity is calculated by Lagrangian tracking and used in the analysis of particle breakage. Experimental work on the breakability is carried out using aspirin, paracetamol, sucrose and α-lactose monohydrate particles. The relative shift in the specific surface area is determined and together with the calculated particle impact velocity and physical properties, they are used to calculate the breakability index. A good agreement is obtained with the single particle impact testing and aerodynamic dispersion by Scirocco disperser, indicating the breakability could also be inferred from this method.

Analysis of particle dynamics in a pin mill by Discrete Element Method

Milling is an important process for tailoring the particle size distribution for enhanced attributes, such as dissolution, content uniformity, tableting, etc., especially for active pharmaceutical ingredients and excipients in pharmaceutical industries. Milling performance of particulate solids depends on the equipment operating conditions (geometry, process conditions and input energy etc.) as well as material properties (particle size, shape, and mechanical properties, such as Young’s modulus, hardness and fracture toughness). In this paper the particle dynamics in a pin mill is analysed using Discrete Element Method (DEM), combined with a novel approach for assessing particle breakability by single particle impact testing. A sensitivity analysis is carried out addressing the effect of the milling conditions (rotational speed and feed particle flow rate), accounting for feed mechanical properties on the breakage behaviour of the particles. Particle collision energy spectra are calculated and shown to have a distribution with the upper tail end being close to the maximum energy associated with the collision with the rings. Breakage is primarily due to collisions with the rings, except for large particles that are comparable in size with the gap between the rings, nipping is also a contributory breakage mechanism.

Assessment of impact breakage of carbamazepine dihydrate due to aerodynamic dispersion

Acicular crystals are very common in pharmaceutical manufacturing. They are very prone to breakage, causing unwanted particle size degradation and problems such as segregation and lump formation. We investigate the breakage pattern of carbamazepine dihydrate, an acicular and platy crystal with cleavage planes. It readily undergoes attrition during isolation and drying stage, causing processing difficulties. We use the aerodynamic dispersion of a very small quantity of powder sample to induce breakage by applying a pulse of pressurised air. The dispersion unit of Morphologi G3 is used for this purpose. The broken particles settle in a chamber and are subsequently analysed using the built-in image analysis software. The shift in the particle size and shape distributions is quantified through which the extent of breakage is determined as a function of the dispersion pressure. The analysis reveals a change of breakage mechanism as the dispersion pressure is increased from primarily snapping along the crystal length to one in which chipping has also a notable contribution. The breakage data are analysed using a modified impact-based breakage model and the breakability index of the carbamazepine dihydrate is determined for the two breakage regimes. The method provides a quick and easy testing of particle breakability, a useful tool for assessing attrition in process plant and grindability in milling operations.

Analysis of pin milling of pharmaceutical materials

Milling is an important process for tailoring the particle size distribution for enhanced dissolution, content uniformity, tableting, etc., specially for active pharmaceutical ingredients and excipient in pharmaceutical industries. Milling performance of particulate solids depends on the equipment operating conditions (geometry, process conditions and input energy etc.) as well as material properties (particle size, shape, and mechanical properties, such as Young's modulus, hardness and fracture toughness). In this work, a newly developed approach to assess the breakability of pharmaceutical materials using an aerodynamic dispersion method has been combined with the Discrete Element Method (DEM) to simulate the dynamic behaviour of a number of pharmaceutical materials in a pin mill. A sensitivity analysis is carried out addressing the effect of the milling conditions (rotational speed of the mill and feed particle flow rate) and feed properties on the milled products in terms of the shift in the specific surface area of the milled particles. The outcome of the work is used as a method to predict the breakage of the particles for the milling conditions where chipping takes place.