Lipid-based nanoformulations for peptide delivery

Loading bioactive peptides within different nanocarriers to enhance their functionality and bioavailability; in vitro and in vivo studies

A hydrolyzed protein is a blend of peptides and amino acids which is the result of hydrolysis by enzymes, acids or alkalis. The Bioactive Peptides (BPs) show important biological roles including antioxidant, antimicrobial, anti-diabetic, anti-cancer, and anti-hypertensive effects, as well as positive effects on the immune, nervous, and digestive systems. Despite the benefits of BPs, challenges such as undesired organoleptic properties, solubility profile, chemical instability, and low bioavailability limit their use in functional food formulations and dietary supplements. Nanocarriers have emerged as a promising solution for overcoming these challenges by improving the stability, solubility, resistance to gastric digestion, and bioavailability, allowing for the targeted and controlled delivery, and reduction or masking of the undesirable flavor of BPs. This study reviews the recent scientific accomplishments concerning the loading of BPs into various nanocarriers including lipid, carbohydrate and protein based-nanocarriers. A special emphasis is given to their application in food formulations in accordance to the challenges associated with their use.

Preparation and evaluation of novel oral tacrolimus nanocochleates for organ transplantation to reduce individual differences and improve drug safety

After organ transplantation, patients require treatment with immunosuppressive drugs to prevent immune rejection and transplantation failure. Tacrolimus (FK506) is a widely used immunosuppressant known for its potent immunosuppressive effect and narrow therapeutic range. Monitoring of FK506 blood concentrations is essential to avoid nephrotoxicity. In this study, a novel FK506 nanomedicine (FK506 cochleates) was developed using a microfluidic method to reduce variability among individuals and improve drug safety. The particle size of FK506 cochleates was (183.3 ± 1.4) nm, the zeta potential was -(39.28 ± 2.12) mV, and the encapsulation efficiency was more than 85 %. Particle size of FK506 cochleates could be maintained for up to 12 weeks in freeze-dried powder form. Small-angle X-ray scattering (SAXS) experiment confirmed the formation of cochleates by adding calcium solution. In vitro release studies demonstrated a sustained-release profile of FK506 from the cochleates carrier. Furthermore, the cochleates carrier could protect FK506 from the influence of stomach acid and slowly release the drug in the intestine. After oral administration, FK506 cochleates exhibited sustained-release properties in rats, accumulating in the spleen and lymph nodes - key anatomical sites for FK506's pharmacological action. Importantly, FK506 cochleates significantly prolonged the survival time in the rabbit heart transplantation model while maintaining good safety profiles. In conclusion, the FK506 cochleates showed promising potential for enhancing drug safety in therapeutic organ transplantation.

Dopamine and Citicoline-Co-Loaded Solid Lipid Nanoparticles as Multifunctional Nanomedicines for Parkinson's Disease Treatment by Intranasal Administration

This work aimed to evaluate the potential of the nanosystems constituted by dopamine (DA) and the antioxidant Citicoline (CIT) co-loaded in solid lipid nanoparticles (SLNs) for intranasal administration in the treatment of Parkinson disease (PD). Such nanosystems, denoted as DA-CIT-SLNs, were designed according to the concept of multifunctional nanomedicine where multiple biological roles are combined into a single nanocarrier and prepared by the melt emulsification method employing the self-emulsifying Gelucire® 50/13 as lipid matrix. The resulting DA-CIT-SLNs were characterized regarding particle size, surface charge, encapsulation efficiency, morphology, and physical stability. Differential scanning calorimetry, FT-IR, and X ray diffraction studies were carried out to gain information on solid-state features, and in vitro release tests in simulated nasal fluid (SNF) were performed. Monitoring the particle size at two temperatures (4 °C and 37 °C), the size enlargement observed over the time at 37 °C was lower than that observed at 4 °C, even though at higher temperature, color changes occurred, indicative of possible neurotransmitter decomposition. Solid-state studies indicated a reduction in the crystallinity when DA and CIT are co-encapsulated in DA-CIT-SLNs. Interestingly, in vitro release studies in SNF indicated a sustained release of DA. Furthermore, DA-CIT SLNs displayed high cytocompatibility with both human nasal RPMI 2650 and neuronal SH-SY5Y cells. Furthermore, OxyBlot assay demonstrated considerable potential to assess the protective effect of antioxidant agents against oxidative cellular damage. Thus, such protective effect was shown by DA-CIT-SLNs, which constitute a promising formulation for PD application.

Long-Circulating and Brain-Targeted Liposomes Loaded with Isoliquiritigenin: Formation, Characterization, Pharmacokinetics, and Distribution

Isoliquiritigenin (ISL) has excellent neuroprotective effects. However, its limitations, including poor solubility, low bioavailability, and low accumulation in the brain, restrict its clinical promotion. In this study, a novel type of ISL-loaded liposome (ISL-LP) modified with the brain-targeting polypeptide angiopep-2 was prepared to improve these properties. The zeta potential, morphology, particle size, encapsulation efficiency, drug loading, and in vitro release of ISL-LP were evaluated. The pharmacokinetics and tissue distribution of ISL and ISL-LP were also investigated. The results demonstrated that ISL-LP had an average particle size of 89.36 ± 5.04 nm, a polymer dispersity index of 0.17 ± 0.03, a zeta potential of -20.27 ± 2.18 mV, and an encapsulation efficiency of 75.04 ± 3.28%. The in vitro release experiments indicate that ISL-LP is a desirable sustained-release system. After intravenous administration, LPC-LP prolonged the circulation time of ISL in vivo and enhanced its relative brain uptake. In conclusion, ISL-LP could serve as a promising brain-targeting system for the treatment and prevention of central nervous system (CNS) disorders.

Harnessing Nanovaccines for Effective Immunization─A Special Concern on COVID-19: Facts, Fidelity, and Future Prospective

Nanotechnology has emerged as a transformative pathway in vaccine research and delivery. Nanovaccines, encompassing lipid and nonlipid formulations, exhibit considerable advantages over traditional vaccine techniques, including enhanced antigen stability, heightened immunogenicity, targeted distribution, and the potential for codelivery with adjuvants or immune modulators. This review provides a comprehensive overview of the latest advancements and applications of lipid and non-lipid-based nanovaccines in current vaccination strategies for immunization. The review commences by outlining the fundamental concepts underlying lipid and nonlipid nanovaccine design before delving into the diverse components and production processes employed in their development. Subsequently, a comparative analysis of various nanocarriers is presented, elucidating their distinct physicochemical characteristics and impact on the immune response, along with preclinical and clinical studies. The discussion also highlights how nanotechnology enables the possibility of personalized and combined vaccination techniques, facilitating the creation of tailored nanovaccines to meet the individual patient needs. The ethical aspects concerning the use of nanovaccines, as well as potential safety concerns and public perception, are also addressed. The study underscores the gaps and challenges that must be overcome before adopting nanovaccines in clinical practice. This comprehensive analysis offers vital new insights into lipid and nonlipid nanovaccine status. It emphasizes the significance of continuous research, collaboration among interdisciplinary experts, and regulatory measures to fully unlock the potential of nanotechnology in enhancing immunization and ensuring a healthier, more resilient society.

Dynamic Processes and Mechanical Properties of Lipid-Nanoparticle Mixtures

In this study, we investigate the dynamic processes and mechanical properties of lipid nanoparticle mixtures in a melt via dissipation particle dynamic simulation. By investigating the distribution of nanoparticles in lamellar and hexagonal lipid matrices in equilibrium state and dynamic processes, we observe that the morphology of such composites depends not only on the geometric features of the lipid matrix but also on the concentration of nanoparticles. The dynamic processes are also demonstrated by calculating the average radius of gyration, which indicates the isotropic conformation of lipid molecules in the x-y plane and that the lipid chains are stretched in the z direction with the addition of nanoparticles. Meanwhile, we predict the mechanical properties of lipid-nanoparticle mixtures in lamellar structures by analyzing the interfacial tensions. Results show that the interfacial tension decreased with the increase in nanoparticle concentration. These results provide molecular-level information for the rational and a priori design of new lipid nanocomposites with ad hoc tailored properties.

Antimicrobial Peptides against Bacterial Pathogens: Innovative Delivery Nanosystems for Pharmaceutical Applications

The introduction of antibiotics has revolutionized the treatment and prevention of microbial infections. However, the global spread of pathogens resistant to available antibiotics is a major concern. Recently, the WHO has updated the priority list of multidrug-resistant (MDR) species for which the discovery of new therapeutics is urgently needed. In this scenario, antimicrobial peptides (AMPs) are a new potential alternative to conventional antibiotics, as they show a low risk of developing antimicrobial resistance, thus preventing MDR bacterial infections. However, there are limitations and challenges related to the clinical impact of AMPs, as well as great scientific efforts to find solutions aimed at improving their biological activity, in vivo stability, and bioavailability by reducing the eventual toxicity. To overcome some of these issues, different types of nanoparticles (NPs) have been developed for AMP delivery over the last decades. In this review, we provide an update on recent nanosystems applied to AMPs, with special attention on their potential pharmaceutical applications for the treatment of bacterial infections. Among lipid nanomaterials, solid lipid NPs and lipid nanocapsules have been employed to enhance AMP solubility and protect peptides from proteolytic degradation. In addition, polymeric NPs, particularly nanogels, are able to help in reducing AMP toxicity and also increasing AMP loading. To boost AMP activity instead, mesoporous silica or gold NPs can be selected due to their easy surface functionalization. They have been also used as nanocarriers for different AMP combinations, thus synergistically potentiating their action against pathogens.

Smart Polymeric Micelles for Anticancer Hydrophobic Drugs

Cancer has become one of the deadliest diseases in our society. Surgery accompanied by subsequent chemotherapy is the treatment most used to prolong or save the patient's life. Still, it carries secondary risks such as infections and thrombosis and causes cytotoxic effects in healthy tissues. Using nanocarriers such as smart polymer micelles is a promising alternative to avoid or minimize these problems. These nanostructured systems will be able to encapsulate hydrophilic and hydrophobic drugs through modified copolymers with various functional groups such as carboxyls, amines, hydroxyls, etc. The release of the drug occurs due to the structural degradation of these copolymers when they are subjected to endogenous (pH, redox reactions, and enzymatic activity) and exogenous (temperature, ultrasound, light, magnetic and electric field) stimuli. We did a systematic review of the efficacy of smart polymeric micelles as nanocarriers for anticancer drugs (doxorubicin, paclitaxel, docetaxel, lapatinib, cisplatin, adriamycin, and curcumin). For this reason, we evaluate the influence of the synthesis methods and the physicochemical properties of these systems that subsequently allow an effective encapsulation and release of the drug. On the other hand, we demonstrate how computational chemistry will enable us to guide and optimize the design of these micelles to carry out better experimental work.

Walnut peptide loaded proliposomes with hydroxyapatite as a carrier: Fabrication, environmental stability, and in vitro digestion attribute

To explore the feasibility of hydroxyapatite (HAP) as the carrier for proliposomes and improve the stability of walnut peptides (WPs), WPs-loaded proliposomes (WPs-PROLIPs) with hydroxyapatite (HAP) as the carrier were fabricated, and the physicochemical properties, environmental stability as well as in vitro simulated digestion release performance of the proliposomes were investigated. The proliposomes with HAP possessed smaller particle sizes and higher encapsulation efficiencies than those without HAP. FTIR analysis revealed that hydrogen bonds formed between HAP and phospholipids in the proliposomes. The inclusion of HAP in WPs-PROLIPs led to the improvement of the thermal degradation stability and environmental stabilities of the system. HAP also induced the conversion of free water into bound water in the proliposomes, as evaluated by LF NMR. In addition, proliposomal encapsulation did not affect the antioxidant activity of WPs-PROLIPs and the lateral order of the liposome membrane. Finally, in vitro digestion showed that the addition of HAP endowed the proliposomes with a retarded free fatty acid release effect, which was dependent on the weight ratio of phospholipids to HAP. These results offer opportunities for the use of HAP as a feasible carrier and lyoprotectant for proliposomes encapsulating biopeptides.

Advances and applications of monoolein as a novel nanomaterial in mitigating chronic lung diseases

Chronic lung diseases such as asthma, chronic obstructive pulmonary disease, lung cancer, and the recently emerged COVID-19, are a huge threat to human health, and among the leading causes of global morbidity and mortality every year. Despite availability of various conventional therapeutics, many patients remain poorly controlled and have a poor quality of life. Furthermore, the treatment and diagnosis of these diseases are becoming increasingly challenging. In the recent years, the application of nanomedicine has become increasingly popular as a novel strategy for diagnosis, treatment, prevention, as well as follow-up of chronic lung diseases. This is attributed to the ability of nanoscale drug carriers to achieve targeted delivery of therapeutic moieties with specificity to diseased site within the lung, thereby enhancing therapeutic outcomes of conventional therapies whilst minimizing the risks of adverse reactions. For this instance, monoolein is a polar lipid nanomaterial best known for its versatility, thermodynamic stability, biocompatibility, and biodegradability. As such, it is commonly employed in liquid crystalline systems for various drug delivery applications. In this review, we present the applications of monoolein as a novel nanomaterial-based strategy for targeted drug delivery with the potential to revolutionize therapeutic approaches in chronic lung diseases.

Application of nanotechnology in management and treatment of diabetic wounds

Diabetic wounds are one of the most common health problems worldwide, enhancing the demand for new management strategies. Nanotechnology, as a developing subject in diabetic wound healing, is proving to be a promising and effective tool in treatment and care. It is, therefore, necessary to ascertain the available and distinct nanosystems and evaluate their performance when topically applied to the injury site, especially in diabetic wound healing. Several active ingredients, including bioactive ingredients, growth factors, mesenchymal stem cells, nucleic acids, and drugs, benefit from improved properties when loaded into nanosystems. Given the risk of problems associated with systemic administration, the topical application should be considered, provided stability and efficacy are assured. After nanoencapsulation, active ingredients-loaded nanosystems have been showing remarkable features of biocompatibility, healing process hastening, angiogenesis, and extracellular matrix compounds synthesis stimulation, contributing to a decrease in wound inflammation. Despite limitations, nanotechnology has attracted widespread attention in the scientific community and seems to be a valuable technological ally in the treatment and dressing of diabetic wounds. The use of nanotechnology in topical applications enables efficient delivery of the active ingredients to the specific skin site, increasing their bioavailability, stability, and half-life time, without compromising their safety.

Synthesis and Characterization of Chitosan-Decorated Nanoemulsion Gel of 5-Fluorouracil for Topical Delivery

(1) Background: The present study aimed to prepare chitosan-coated nanoemulsion gel containing 5-fluorouracil for enhanced topical delivery. (2) Methods: To formulate the nanoemulsion gel, oleic acid was used as the oil phase and Carbopol 940 as a gelling agent. Chitosan was used as a coating agent to control the release of 5-FU. Drug−excipient compatibility was evaluated using ATR-FTIR. The prepared nanoemulsion formulations were characterized based on particle size distribution, zeta potential, % encapsulation efficiency and drug content. In vitro drug release, skin drug retention and ex vivo permeation profiles were performed across rat skin using a Franz diffusion cell. Skin irritation experiments were also conducted on rats to examine the irritation potential of the formulations. (3) Results: It was found that the drug and excipients were compatible and chitosan successfully coated 5-FU, as demonstrated by ATR-FTIR results. The introduction of chitosan increased the size and zeta potential of the nanoemulsion. The 5-FU release in vitro was significantly lowered in the case of chitosan-decorated nanoemulsion (5-FU-C-NE), whereas the permeation and skin drug retention were higher in the case of 5-FU-C-NE. The formulations were proven non-irritant to the skin of the rats. The optimized formulation of the nanoemulsion was introduced into 1% Carbopol 940 gel. Incorporating the nanoemulsion into the gel further reduced the drug release in vitro and ex vivo permeation, whereas the retention of the drug in the skin was significantly increased (ANOVA; p < 0.05). The increase in skin retention was due to the presence of chitosan and Carbopol 940. The in vitro and ex vivo results were also confirmed with in vivo studies. Incorporating nanoemulsion into gel has resulted in higher Tmax, longer half-life and greater skin drug retention. (4) Conclusion: The results suggest that chitosan-decorated nanoemulsion gel is safe and can potentially be used to promote 5-FU skin retention, which is ideal for skin diseases such as melanoma.

Liposomes: An emerging carrier for targeting Alzheimer's and Parkinson's diseases

The function of the brain can be affected by various factors that include infection, tumor, and stroke. The major disorders reported with altered brain function are Alzheimer's disease (AD), Parkinson's disease (PD), dementia, brain cancer, seizures, mental disorders, and other movement disorders. The major barrier in treating CNS disease is the blood-brain barrier (BBB), which protects the brain from toxic molecules, and the cerebrospinal fluid (CSF) barrier, which separates blood from CSF. Brain endothelial cells and perivascular elements provide an integrated cellular barrier, the BBB, which hamper the invasion of molecules from the blood to the brain. Even though many drugs are available to treat neurological disorders, it fails to reach the desired site with the required concentration. In this purview, liposomes can carry required concentrations of molecules intracellular by diverse routes such as carrier-mediated transport and receptor-mediated transcytosis. Surface modification of liposomes enables them to deliver drugs to various brain cells, including neurons, astrocytes, oligodendrocytes, and microglia. The research studies supported the role of liposomes in delivering drugs across BBB and in reducing the pathogenesis of AD and PD. The liposomes were surface-functionalized with various molecules to reach the cells intricated with the AD or PD pathogenesis. The targeted and sustained delivery of drugs by liposomes is disturbed due to the antibody formation, renal clearance, accelerated blood clearance, and complement activation-related pseudoallergy (CARPA). Hence, this review will focus on the characteristics, surface functionalization, drug loading, and biodistribution of liposomes respective to AD and PD. In addition, the alternative strategies to overcome immunogenicity are discussed briefly.

Surface Modification of Lipid-Based Nanoparticles

There is a growing interest in the development of lipid-based nanocarriers for multiple purposes, including the recent increase of these nanocarriers as vaccine components during the COVID-19 pandemic. The number of studies that involve the surface modification of nanocarriers to improve their performance (increase the delivery of a therapeutic to its target site with less off-site accumulation) is enormous. The present review aims to provide an overview of various methods associated with lipid nanoparticle grafting, including techniques used to separate grafted nanoparticles from unbound ligands or to characterize grafted nanoparticles. We also provide a critical perspective on the usefulness and true impact of these modifications on overcoming different biological barriers, with our prediction on what to expect in the near future in this field.

Nanomedicine as a magic bullet for combating lymphoma

Hematological malignancy like lymphoma originates in lymph tissues and has a propensity to spread across other organs. Managing such tumors is challenging as conventional strategies like surgery and local treatment are not plausible options and there are high chances of relapse. The advent of novel targeted therapies and antibody-mediated treatments has proven revolutionary in the management of these tumors. Although these therapies have an added advantage of specificity in comparison to the traditional chemotherapy approach, such treatment alternatives suffer from the occurrence of drug resistance and dose-related toxicities. In past decades, nanomedicine has emerged as an excellent surrogate to increase the bioavailability of therapeutic moieties along with a reduction in toxicities of highly cytotoxic drugs. Nanotherapeutics achieve targeted delivery of the therapeutic agents into the malignant cells and also have the ability to carry genes and therapeutic proteins to the desired sites. Furthermore, nanomedicine has an edge in rendering personalized medicine as one type of lymphoma is pathologically different from others. In this review, we have highlighted various applications of nanotechnology-based delivery systems based on lipidic, polymeric and inorganic nanomaterials that address different targets for effectively tackling lymphomas. Moreover, we have discussed recent advances and therapies available exclusively for managing this malignancy.

Lipid-Based Nanocarriers for Neurological Disorders: A Review of the State-of-the-Art and Therapeutic Success to Date

Neurodegenerative disorders including Alzheimer's, Parkinson's, and dementia are chronic and advanced diseases that are associated with loss of neurons and other related pathologies. Furthermore, these disorders involve structural and functional defections of the blood-brain barrier (BBB). Consequently, advances in medicines and therapeutics have led to a better appreciation of various pathways associated with the development of neurodegenerative disorders, thus focusing on drug discovery and research for targeted drug therapy to the central nervous system (CNS). Although the BBB functions as a shield to prevent toxins in the blood from reaching the brain, drug delivery to the CNS is hindered by its presence. Owing to this, various formulation approaches, including the use of lipid-based nanocarriers, have been proposed to address shortcomings related to BBB permeation in CNS-targeted therapy, thus showing the potential of these carriers for translation into clinical use. Nevertheless, to date, none of these nanocarriers has been granted market authorization following the successful completion of all stages of clinical trials. While the aforementioned benefits of using lipid-based carriers underscores the need to fast-track their translational development into clinical practice, technological advances need to be initiated to achieve appropriate capacity for scale-up and the production of affordable dosage forms.

The nanotechnological approach for nasal delivery of peptide drugs: a comprehensive review

This review gathers recent studies, patents, and clinical trials involving the nasal administration of peptide drugs to supply a panorama of developing nanomedicine advances in this field. Peptide drugs have been featured in the pharmaceutical market, due to their high efficacy, biological activity, and low immunogenicity. Pharmaceutical industries need technology to circumvent issues relating to peptide stability and bioavailability. The oral route offers very harsh and unfavourable conditions for peptide administration, while the parenteral route is inconvenient and risky for patients. Nasal administration is an attractive alternative, mainly when associated with nanotechnological approaches. Nanomedicines may improve the nasal administration of peptide drugs by providing protection for the macromolecules from enzymes while also increasing their time of retention and permeability in the nasal mucosa. Nanomedicines for nasal administration containing peptide drugs have been acclaimed for both prevention, and treatment, of infections, including the pandemic COVID-19, cancers, metabolic and neurodegenerative diseases.

Cubosomes and Hexosomes as Novel Nanocarriers for Bioactive Compounds

Cubosomes and hexosomes are nanostructured liquid crystalline particles, known as biocompatible nanocarriers for drug delivery. In recent years, there has been good interest in using cubosomes and hexosomes for the delivery of bioactive compounds in functional foods. These systems feature thermodynamic stability, encapsulate both hydrophobic and hydrophilic substances, and have a high tolerance to environmental stresses and potential for controlled release. This review outlines the recent advances in cubosomes and hexosomes in the food industry, focusing on their structure, composition, formation mechanisms, and factors influencing phase transformation between cubosomes and hexosomes. The potential applications especially for the bioactive delivery are presented. The integration of cubosomes and hexosomes with other emerging encapsulation technologies such as surface coating, gelation, and incorporation of polymers are also discussed.

Nanostructured Lipid Carriers (NLCs) for Oral Peptide Drug Delivery: About the Impact of Surface Decoration

This study was aimed to evaluate the impact of surfactants used for nanostructured lipid carriers (NLCs) to provide enzymatic protection for incorporated peptides. Insulin as a model peptide was ion paired with sodium dodecyl sulfate to improve its lipophilicity. Three NLC formulations containing polyethylene glycol ester (PEG-ester), polyethylene glycol ether (PEG-ether), and polyglycerol ester (PG-ester) surfactants were prepared by solvent diffusion method. NLCs were characterized regarding particle size, polydispersity index, and zeta potential. Biocompatibility of NLCs was assessed on Caco-2 cells via resazurin assay. In vitro lipolysis study was performed using a standard lipid digestion method. Proteolytic studies were performed in simulated gastric fluid containing pepsin and simulated intestinal fluid containing pancreatin. Lipophilicity of insulin in terms of log Poctanol/water was improved from -1.8 to 2.1. NLCs were in the size range of 64-217 nm with a polydispersity index of 0.2-0.5 and exhibited a negative surface charge. PG-ester NLCs were non-cytotoxic up to a concentration of 0.5%, PEG-ester NLCs up to a concentration of 0.25% and PEG-ether NLC up to a concentration of 0.125% (w/v). The lipolysis study showed the release of >90%, 70%, and 10% of free fatty acids from PEG-ester, PG-ester, and PEG-ether NLCs, respectively. Proteolysis results revealed the highest protective effect of PEG-ether NLCs followed by PG-ester and PEG-ester NLCs for incorporated insulin complex. Findings suggest that NLCs bearing substructures less susceptible to degrading enzymes on their surface can provide higher protection for incorporated peptides toward gastrointestinal proteases.

Development and immunobiological evaluation of nanoparticles containing an immunodominant epitope of herpes simplex virus

Herpes simplex virus (HSV) 1 and 2 are viruses that infect individuals worldwide and for which there is no cure or vaccine available. The protective response against herpes is mostly mediated by CD8 T lymphocytes that respond to the immunodominant SSIEFARL epitope. However, there are some obstacles concerning the use of free SSIEFARL for vaccine or immunotherapy. The aim of this study was to evaluate the feasibility of nanoencapsulation of SSIEFARL and its immunostimulatory properties. Nano/SSIEFARL was produced by interfacial polymerization in methylmetacrylate, and the physico-chemical properties, morphology and immunobiological parameters were evaluated. To evaluate the ex vivo capacity of Nano/SSIEFARL, we used splenocytes from HSV-1-infected mice to enhance the frequency of SSIEFARL-specific CD8 T lymphocytes. The results indicate that Nano/SSIEFARL has a spherical shape, an average diameter of 352 ± 22 nm, the PDI was 0.361 ± 0.009 and is negatively charged (-26.30 ± 35). The stability at 4°C was 28 days. Also, Nano/SSIEFARL is not toxic for cells at low concentrations in vitro and it is taken up by JAWS II dendritic cells. No histopathological changes were observed in kidneys, liver and lymph nodes of animals treated with Nano/SSIEFARL. Nan/SSIEFARL increased the production of IL-1β, TNF-α and IL-12 by the dendritic cells. Finally, Nano/SSIEFARL expanded the frequency of SSIEFARL-specific CD8+T lymphocytes at the same rate as free SSIEFARL. In conclusion all data together indicate that SSIEFARL is suitable for nanoencapsulation, and the system produced presents some immunoadjuvant properties that can be used to improve the immune response against herpes.

Dopamine-loaded lipid based nanocarriers for intranasal administration of the neurotransmitter: A comparative study

Both dopamine (DA) loaded Solid Lipid Nanoparticles (SLN) and liposomes (Lip), designed for intranasal administration of the neurotransmitter as an innovative Parkinson disease treatment, were already characterized in vitro in some extent by us (Trapani et al., 2018a and Cometa et al., 2020, respectively). Herein, to gain insight into the structure of SLN, X-ray Photoelectron Spectroscopy Analysis was carried out and DA-SLN (SLN 1) were found to exhibit high amounts of the neurotransmitter on the surface, whereas the external side of Glycol Chitosan (GCS) containing SLN (SLN 2) possessed only few amounts. However, SLN 2 were characterized by the highest encapsulation DA efficiency (i.e., 81%). Furthermore, in view of intranasal administration, mucoadhesion tests in vitro were also conducted for SLN and Lip formulations, evidencing high muchoadesive effect exerted by SLN 2. Concerning ex-vivo studies, SLN and Lip were found to be safe for Olfactory Ensheathing Cells and fluorescent SLN 2 were taken up in a dose-dependent manner reaching the 100% of positive cells, while Lip 2 (chitosan-glutathione-coated) were internalised by 70% OECs with six-times more lipid concentration. Hence, SLN 2 formulation containing DA and GCS may constitute interesting formulations for further studies and promising dosage form for non-invasive nose-to-brain neurotransmitter delivery.

Fabrication and characterization of walnut peptides-loaded proliposomes with three lyoprotectants: Environmental stabilities and antioxidant/antibacterial activities

To protect walnut peptides from harsh external environments during their storage and digestion, proliposomes loaded with walnut peptides were fabricated using sucrose, trehalose, and mannitol as carriers and lyoprotectants. The physicochemical properties, environmental stability, antioxidant/antibacterial activities, and digestion in vitro of the proliposomes were evaluated. The freshly prepared liposomes were uniform in size, but the hydrated proliposomes showed a more uneven size distribution. The lyoprotectants helped maintain favorable liposome shape during lyophilization. Alongside the lyoprotectants, the walnut peptides further stabilized the lipid bilayer. Proliposomes encapsulation didn't impact the peptides' antioxidant activity. Furthermore, walnut peptides-loaded proliposomes exhibited antibacterial activity against Escherichia coli and Staphylococcus aureus. The proliposomes were stable during gastric-phase digestion. The lyoprotectants changed the free fatty acid release behaviors of the proliposomes. These characteristics suggest potential applications for proliposomes as effective delivery systems for biopeptides in food stuffs, thereby protecting bioactivities during storage and passage through the gastrointestinal tract.

Galenic Lab-on-a-Chip concept for lipid nanocapsules production

The continuous production of drug delivery systems assisted by microfluidics has drawn a growing interest because of the high reproducibility, low batch-to-batch variations, narrow and controlled particle size distributions and scale-up ease induced by this kind of processes. Besides, microfluidics offers opportunities for high throughput screening of process parameters and the implementation of process characterization techniques as close to the product as possible. In this context, we propose to spotlight the GALECHIP concept through the development of an instrumented microfluidic pilot considered as a Galenic Lab-on-a-Chip to formulate nanomedicines, such as lipid nanocapsules (LNCs), under controlled process conditions. In this paper we suggest an optimal rational development in terms of chip costs and designs. First, by using two common additive manufacturing techniques, namely fused deposition modelling and multi-jet modelling to prototype customized 3D microfluidic devices (chips and connectors). Secondly, by manufacturing transparent Silicon (Si)/Glass chips with similar channel geometries but obtained by a new approach of deep reactive ion etching (DRIE) technology suitable with in situ small angle X-ray scattering characterizations. LNCs were successfully produced by a phase inversion composition (PIC) process with highly monodispersed sizes from 25 nm to 100 nm and formulated using chips manufactured by 3D printing and DRIE technologies. The transparent Si/Glass chip was also used for the small angle X-ray scattering (SAXS) analysis of the LNC formulation with the PIC process. The 3D printing and DRIE technologies and their respective advantages are discussed in terms of cost, easiness to deploy and process developments in a GALECHIP point of view.

A new method to prepare microparticles based on an Aqueous Two-Phase system (ATPS), without organic solvents

HYPOTHESIS

Aqueous Two-Phase Systems (ATPS) are aqueous droplets dispersed in an aqueous phase. This specific behavior arises from interactions between at least two water-soluble entities, such as thermodynamically incompatible polymers. A simple, fast, and "green" process to produce ATPS with an aqueous core would be of high interest to the pharmaceutical field for drug delivery. However, to date, rapid destabilization of ATPS represents the main hurdle for their use. Herein we present a novel process to achieve a stabilized microparticle-ATPS, without the use of organic solvents.

EXPERIMENTS

ATPS composed of dextran and polyethylene oxide were prepared. A Pickering-like emulsion technique was used to stabilize the ATPS by adsorbing semi-solid particles (chitosan-grafted lipid nanocapsules) at the interface between the two aqueous phases. Finally, microparticles were formed by a polyelectrolyte complexation and gelation. The structure and stability of ATPS were characterized using microscopy and Turbiscan analysis.

FINDINGS

Adding chitosan-grafted lipid nanocapsules induced ATPS stabilization. Adding a polyelectrolyte such as sodium alginate allowed the formation of microparticles with a gelled shell that strengthened the formulation against shear stress and improved long-term stability, thus demonstrating that is possible to use ATPS to form delivery systems to encapsulate hydrophilic molecules.

Lipid nanocapsules loaded with prilocaine and lidocaine and incorporated in gel for topical application

Lipid nanocapsules (LNC) are special drug delivery system (DDS) carriers obtained by the phase-inversion temperature method (PIT). This study describes the encapsulation of the local anesthetics (LA) prilocaine (PLC) and lidocaine (LDC) in lipid nanocapsules (LNC_PLC+LDC) optimized by 2³ factorial design, characterized through DLS, NTA, CRYO-EM and release kinetics and incorporated in carbopol gel (Gel_{LNC PLC+LDC}) prior to in vivo anesthetic effect (in mice) evaluation. A very homogeneous population of small (50 nm; polydispersity index = 0.05) spherical nanocapsules with negative zeta potentials (-21 mV) and ca. 2.3 × 10¹⁵ particles/mL was obtained. The encapsulation efficiency was high (81% and 89% for prilocaine and lidocaine, respectively). The release rate profile was free PLC = free LDC > LNC_PLC+LDC > Gel_{LNC PLC+LDC}. The hybrid system increased (4x) the anesthesia time in comparison to an equipotent gel formulation prepared without LNC. No tissue damage was detected on the tail skin of mice that received the formulations. This study shows that lipid nanocapsules are suitable carriers for PLC and LDC, promoting longer and safer topical anesthesia. Gel_{LNC PLC+LDC} is mucoadhesive and suitable for application in the mouth, where it could be used as a pre-anesthetic, to reduce pain of needle stick (infiltrative anesthesia).

Erythrocytes and Nanoparticles: New Therapeutic Systems

Nano-delivery systems represent one of the most studied fields, thanks to the associated improvement in the treatment of human diseases. The functionality of nanostructures is a crucial point, which the effectiveness of nanodrugs depends on. A hybrid approach strategy using synthetic nanoparticles (NPs) and erythrocytes offers an optimal blend of natural and synthetic materials. This, in turn, allows medical practitioners to exploit the combined advantages of erythrocytes and NPs. Erythrocyte-based drug delivery systems have been investigated for their biocompatibility, as well as the long circulation time allowed by specific surface receptors that inhibit immune clearance. In this review, we will discuss several methods—whole erythrocytes as drug carriers, red blood cell membrane-camouflaged nanoparticles and nano-erythrosomes (NERs)—while paying attention to their application and specific preparation methods. The ability to target cells makes erythrocytes excellent drug delivery systems. They can carry a wide range of therapeutic molecules while also acting as bioreactors; thus, they have many applications in therapy and in the diagnosis of many diseases.

Antimicrobial peptides as therapeutic agents: opportunities and challenges

The rapid development of microbial resistance to conventional antibiotics has accelerated efforts to find anti-infectives with a novel mode-of-action, which are less prone to bacterial resistance. Intense nonclinical and clinical research is today ongoing to evaluate antimicrobial peptides (AMPs) as potential next-generation antibiotics. Currently, multiple AMPs are assessed in late-stage clinical trials, not only as novel anti-infective drugs, but also as innovative product candidates for immunomodulation, promotion of wound healing, and prevention of post-operative scars. The efforts to translate AMP-based research findings into pharmaceutical product candidates are expected to accelerate in coming years due to technological advancements in multiple areas, including an improved understanding of the mechanism-of-action of AMPs, smart formulation strategies, and advanced chemical synthesis protocols. At the same time, it is recognized that cytotoxicity, low metabolic stability due to sensitivity to proteolytic degradation, and limited oral bioavailability are some of the key weaknesses of AMPs. Furthermore, the pricing and reimbursement environment for new antimicrobial products remains as a major barrier to the commercialization of AMPs.

Topical Pioglitazone Nanoformulation for the Treatment of Atopic Dermatitis: Design, Characterization and Efficacy in Hairless Mouse Model

Pioglitazone (PGZ) is a drug used to treat type 2 diabetes mellitus that has been reported to show additional therapeutic activities on diverse inflammatory parameters. The aim of this study was to optimize a topical PGZ-loaded nanoemulsion (PGZ-NE) in order to evaluate its effectiveness for treating atopic dermatitis (AD). The composition of the nanoformulation was established by pseudo-ternary diagram. Parameters such as physical properties, stability, in vitro release profile, and ex vivo permeation were determined. The efficacy study was carried out using oxazolone-induced AD model in hairless mice. PGZ-NE released the drug following a hyperbolic kinetic. Additionally, its properties provided high retention potential of drug inside the skin. Therapeutic benefits of PGZ-NE were confirmed on diverse events of the inflammatory process, such as reduction of lesions, enhancement of skin barrier function, diminished infiltration of inflammatory cells, and expression of pro-inflammatory cytokines. These results were reinforced by atomic force microscope (AFM), which demonstrated the ability of the formulation to revert the rigidification caused by oxazolone and consequently improve the elasticity of the skin. These results suggest that PGZ-NE may be a promising treatment for inflammatory dermatological conditions such as AD.

Low temperature, easy scaling up method for development of smart nanostructure hybrid lipid capsules for drug delivery application

Lipid Nanocapsules (LNCs) have been used for drug delivery in cells and animal models for several years. LNCs with unique physicochemical properties for favorable biorecognition, biocompatibility and stimuli responsive (pH/temperature etc.) properties i.e., smart-LNCs, are most promising for future nanomedicine applications. However, conventional phase inversion temperature (PIT) method of LNCs preparation may not be suitable for the fabrication of thermally labile drug loaded LNCs and smart-LNCs. Herein, we report for the first time, a novel low temperature (LT) method for the preparation of LNCs (including smart-LNCs of size 25-150 nm), hereafter, named as nanostructure hybrid lipid capsules (nHLCs), comprising safe excipients such as oil (Labrafac™ PG), surfactant (Kolliphor® HS 15, Brij® S100), and lipid (Lipoid S-75, Lipoid S PC-3, Lipoid PE 18:1/18:1, Lipoid PC 16:0/16:0 etc.). Effects of process parameters on the physicochemical properties of nHLCs were probed to optimize the process. Ternary phase diagram shows that our method allows for great flexibility in the formation of nHLCs with tailored size and composition. This method resulted in drug loaded (regorafenib used as model drug) nHLCs with 95 % encapsulation efficiency and sustained release profile at 37 °C. The drug loaded nHLCs (as prepared or in lyophilized form) has excellent storage stability at 4 °C (for more than one month) as well as biocompatibility similar to that of LNCs prepared by PIT method. Our novel LT method of LNCs (i.e. nHLCs) preparation is a generic method for the development of drug loaded (including thermally labile) and smart-LNCs for future nanomedicine applications.

Topical antimicrobial peptide formulations for wound healing: Current developments and future prospects

Antimicrobial peptides (AMPs) are the natural antibiotics recognized for their potent antibacterial and wound healing properties. Bare AMPs have limited activity following topical application attributable to their susceptibility to environment (hydrolysis, oxidation, photolysis), and wound (alkaline pH, proteolysis) related factors as well as minimal residence time. Therefore, the formulation of AMPs is essential to enhance stability, prolong delivery, and optimize effectiveness at the wound site. Different topical formulations of AMPs have been developed so far including nanoparticles, hydrogels, creams, ointments, and wafers to aid in controlling bacterial infection and enhance wound healing process in vivo. Herein, an overview is provided of the AMPs and current understanding of their formulations for topical wound healing applications along with suitable examples. Furthermore, future prospects for the development of effective combination AMP formulations are discussed. STATEMENT OF SIGNIFICANCE: Chronic wound infection and subsequent development of antibiotic resistance are serious clinical problems affecting millions of people worldwide. Antimicrobial peptides (AMPs) possess great potential in effectively killing the bacteria with minimal risk of resistance development. However, AMPs susceptibility to degradation following topical application limits their antimicrobial and wound healing effects. Therefore, development of an optimized topical formulation with high peptide stability and sustained AMP delivery is necessary to maximize the antimicrobial and wound healing effects. The present review provides an overview of the state-of-art in the field of topical AMP formulations for wound healing. Current developments in the field of topical AMP formulations are reviewed and future prospects for the development of effective combination AMP formulations are discussed.

Encapsulation of an endostatin peptide in liposomes: Stability, release, and cytotoxicity study

The endostatin protein is a potent inhibitor of angiogenesis and tumor growth. The anti-angiogenic and antitumor properties of full-length endostatin can be mimicked by its N-terminal segment, including residues 1-27. Therefore, our previous studies have shown that a mutant N-terminal peptide which the Zn-binding loop was replaced by a disulfide loop (referred to as the ES-SS peptide) has preserved antiangiogenic and antitumor properties compared to the native peptide. To increase stability and plasma half-life of the ES-SS peptide, the nano-sized liposomal formulations of the peptide with different ratio of phosphocholine (PC) were synthesized. The liposomal peptide formulations possessed an average size of around 100 nm with (-4 to -36 mv) in zeta potential. The encapsulation efficiency of the ES-SS peptide was in the range of 24-54% with different lipid: peptide molar ratios. In vitro release of the peptide from liposomes indicated a complete peptide release after 7 days. Cytotoxicity assay was evaluated using the human umbilical vein endothelial cells (HUVECs) for various concentrations of the liposomal peptide. The results depicted the gradual release of the peptide through liposomes. By comparing with the free peptide, the liposomal peptide formulations have indicated higher cell viability with IC₅₀ value about 0.1 μM. The peptide-liposome interactions, as well as the peptide effect on the liposome structure, were also investigated through coarse-grained molecular dynamics (CG-MD) simulation. The results revealed that the peptides were assembled in the hydrophilic core of the liposome. The peptide behavior in liposome can stabilize the liposome structure and be a response to the observed low peptide release rate. The investigation is promising for designing a liposome-based anti-angiogenesis peptide delivery system.

Encapsulation of Aspartic Protease in Nonlamellar Lipid Liquid Crystalline Phases

Encapsulation of proteins within lipid inverse bicontinuous cubic phases (Q₂) has been widely studied for many applications, such as protein crystallization or drug delivery of proteins for food and pharmaceutical purposes. However, the use of the lipid sponge (L₃) phase for encapsulation of proteins has not yet been well explored. Here, we have employed a lipid system that forms highly swollen sponge phases to entrap aspartic protease (34 kDa), an enzyme used for food processing, e.g., to control the cheese-ripening process. Small-angle x-ray scattering showed that although the L₃ phase was maintained at low enzyme concentrations (≤15 mg/mL), higher concentration induces a transition to more curved structures, i.e., transition from L₃ to inverse bicontinuous cubic (Q₂) phase. The Raman spectroscopy data showed minor conformational changes assigned to the lipid molecules that confirm the lipid-protein interactions. However, the peaks assigned to the protein showed that the structure was not significantly affected. This was consistent with the higher activity presented by the encapsulated aspartic protease compared to the free enzyme stored at the same temperature. Finally, the encapsulation efficiency of aspartic protease in lipid sponge-like nanoparticles was 81% as examined by size-exclusion chromatography. Based on these results, we discuss the large potential of lipid sponge phases as carriers for proteins.

A comparison of different strategies for antimicrobial peptides incorporation onto/into lipid nanocapsules

Aim: Over the last decade, antimicrobial peptides (AMPs) have emerged as a promising alternative for the treatment of various infections. The aim of this work is to explore the potential of lipid nanocapsules for the delivery of AMPs. Three approaches were compared in terms of encapsulation efficiency, peptide activity and protection against proteases: peptide encapsulation, surface adsorption or covalent attachment of three selected AMPs. Results: A potentiation of the antimicrobial activity and a partial protection of the peptides after adsorption were demonstrated compared with native peptides. Conversely, encapsulation allowed better peptide stability, correlated with higher encapsulation efficiencies and a preservation of the activity. Finally, the covalent attachment strategy turned out to be less conclusive due to peptide inactivation. Conclusion: In brief, a lipid nanocapsule-based platform appears suitable to deliver AMPs.

Antimicrobial Effect of Thymus capitatus and Citrus limon var. pompia as Raw Extracts and Nanovesicles

In view of the increasing interest in natural antimicrobial molecules, this study screened the ability of Thymus capitatus (TC) essential oil and Citrus limon var. pompia (CLP) extract as raw extracts or incorporated in vesicular nanocarriers against Streptococcus mutans and Candida albicans. After fingerprint, TC or CLP were mixed with lecithin and water to produce liposomes, or different ratios of water/glycerol or water/propylene glycol (PG) to produce glycerosomes and penetration enhancer vesicles (PEVs), respectively. Neither the raw extracts nor the nanovesicles showed cytotoxicity against human gingival fibroblasts at all the concentrations tested (1, 10, 100 μg/mL). The disc diffusion method, MIC-MBC/MFC, time-kill assay, and transmission electron microscopy (TEM) demonstrated the highest antimicrobial potential of TC against S. mutans and C. albicans. The very high presence of the phenol, carvacrol, in TC (90.1%) could explain the lethal effect against the yeast, killing up to 70% of Candida and not just arresting its growth. CLP, rich in polyphenols, acted in a similar way to TC in reducing S. mutans, while the data showed a fungistatic rather than a fungicidal activity. The phospholipid vesicles behaved similarly, suggesting that the transported extract was not the only factor to be considered in the outcomes, but also their components had an important role. Even if other investigations are necessary, TC and CLP incorporated in nanocarriers could be a promising and safe antimicrobial in caries prevention.

Off-Stoichiometric Thiol-Ene Chemistry to Dendritic Nanogel Therapeutics

A novel platform of dendritic nanogels is herein presented, capitalizing on the self-assembly of allyl-functional polyesters based on dendritic-linear-dendritic amphiphiles followed by simple cross-linking with complementary monomeric thiols via UV initiated off-stoichiometric thiol-ene chemistry. The facile approach enabled multigram creation of allyl reactive nanogel precursors, in the size range of 190-295 nm, being readily available for further modifications to display a number of core functionalities while maintaining the size distribution and characteristics of the master batch. The nanogels are evaluated as carriers of a spread of chemotherapeutics by customizing the core to accommodate each individual cargo. The resulting nanogels are biocompatible, displaying diffusion controlled release of cargo, maintained therapeutic efficacy, and decreased cargo toxic side effects. Finally, the nanogels are found to successfully deliver pharmaceuticals into a 3D pancreatic spheroids tumor model.

Microemulsions vs chitosan derivative-coated microemulsions for dermal delivery of 8-methoxypsoralen

Background

8-methoxypsoralen (8-MOP) is one of the most commonly utilized drugs in psoralen-ultraviolet A therapy for treatment of vitiligo. However, poor skin retention and systemic side effects limit the clinical application of 8-MOP.

Methods

Microemulsions (MEs) and chitosan derivative-coated 8-MOP MEs were developed and compared for dermal delivery of 8-MOP. Ex vivo skin retention/permeation study was performed to select the ME formulation with the highest retention:permeation ratio. Four different chitosan-coated MEs were prepared and compared with the ME formulation for their ability to distribute 8-MOP in the skin.

Results

Among various ME formulations developed, a formulation containing 2.9% ethyl oleate, 17.2% Cromophor EL35, 8.6% ethanol and 71.3% water showed the highest ex vivo skin retention:permeation ratio (1.98). Of four chitosan-coated MEs prepared, carboxymethyl chitosan-coated MEs (CC-MEs) and hydroxypropyl chitosan-coated MEs (HC-MEs) showed higher ex vivo skin retention:permeation ratio (1.46 and 1.84). and were selected for in vivo pharmacokinetic study. AUC_skin (0–12 h) for 8-MOP MEs (4578.56 h·ng·mL⁻¹) was higher than HC-MEs (3422.47 h·ng·mL⁻¹), CC-MEs (2808.51 h·ng·mL⁻¹) and tincture (1500.16 h·ng·mL⁻¹). Also, AUCplasma (0–12 h) for MEs (39.35±13.90 h·ng·mL⁻¹) was significantly lower than HC-MEs (66.32 h·ng·mL⁻¹), CC-MEs (59.70 h·ng·mL⁻¹) and tincture (73.02 h·ng·mL⁻¹).

Conclusion

These combined results suggested that the MEs developed could be a promising and safe alternative for targeted skin delivery of 8-MOP.

Development and Pharmacokinetics Study of Antifungal Peptide Nanoliposomes by Liquid Chromatography-tandem Mass Spectrometry

Background:

The therapeutic ability and application of antifungal peptide (APs) are limited by their physico-chemical and biological properties, the nano-liposomal encapsulation would improve the in vivo circulation and stability. </P><P> Objective: To develop a long-circulating liposomal delivery systems encapsulated APs-CGA-N12 with PEGylated lipids and cholesterol, and investigated through in vivo pharmacokinetics.

Methods:

The liposomes were prepared and characterized, a rapid and simple liquid chromatographytandem mass spectrometry (LC-MS/MS) assay was developed for the determination of antifungal peptide in vivo, the pharmacokinetic characteristics of APs liposomes were evaluated in rats.

Results:

Liposomes had a large, unilamellar structure, particle size and Zeta potential ranged from 160 to 185 nm and -0.55 to 1.1 mV, respectively. The results indicated that the plasma concentration of peptides in reference solutions rapidly declined after intravenous administration, whereas the liposomeencapsulated ones showed slower elimination. The AUC(0-∞) was increased by 3.0-fold in liposomes in comparison with standard solution (20 mg·kg-1), the half-life (T1/2) was 1.6- and 1.5-fold higher compared to the reference groups of 20 and 40 mg·kg-1, respectively.

Conclusion:

Therefore, it could be concluded that liposomal encapsulation effectively improved the bioavailability and pharmacokinetic property of antifungal peptides.

Decoration of Nanovesicles with pH (Low) Insertion Peptide (pHLIP) for Targeted Delivery

Acidity at surface of cancer cells is a hallmark of tumor microenvironments, which does not depend on tumor perfusion, thus it may serve as a general biomarker for targeting tumor cells. We used the pH (low) insertion peptide (pHLIP) for decoration of liposomes and niosomes. pHLIP senses pH at the surface of cancer cells and inserts into the membrane of targeted cells, and brings nanomaterial to close proximity of cellular membrane. DMPC liposomes and Tween 20 or Span 20 niosomes with and without pHLIP in their coating were fully characterized in order to obtain fundamental understanding on nanocarrier features and facilitate the rational design of acidity sensitive nanovectors. The samples stability over time and in presence of serum was demonstrated. The size, ζ-potential, and morphology of nanovectors, as well as their ability to entrap a hydrophilic probe and modulate its release were investigated. pHLIP decorated vesicles could be useful to obtain a prolonged (modified) release of biological active substances for targeting tumors and other acidic diseased tissues.

Reverse micelle-lipid nanocapsules: a novel strategy for drug delivery of the plectasin derivate AP138 antimicrobial peptide

Introduction

Resistance to traditional antibiotics is an increasingly serious problem. Antimicrobial peptides (AMPs) have emerged as a new therapeutic class with great potential against infectious diseases, as they are less prone to induce resistance. Nanotechnology-based delivery strategies can improve the efficiency and stability of AMPs, particularly against proteolytic degradation. Lipid nanocapsules (LNCs) are a new generation of biomimetic nanocarriers and were used in this study to deliver peptides.

Methods

AMP-loaded reverse micelles (RM) were developed and incorpo rated into LNCs by the phase inversion process and the antimicrobial activity of the AMPs-loaded LNC was evaluated by the minimum inhibitory concentration method. We studied the activity of AMP solutions and AMP-loaded LNCs against Gram-positive and Gram-negative bacterial strains and then evaluated the encapsulation of a new cationic AMP called AP138. Finally, we analyzed the effect of enzymatic attack on AP138 and AP138-RM-LNCs after incubation with trypsin.

Results

AP138 was efficiently encapsulated in the LNCs (encapsulation efficiency = 97.8% at a drug loading of 0.151%), resulting in protection against degradation by proteases and the preservation of antimicrobial activity against Staphylococcus aureus, including methicillin-resistant Staphylococcus aureus.

Conclusion

This study shows that RM-LNCs are an excellent candidate system to deliver AMPs.

Cubosomes for topical delivery of the antimicrobial peptide LL-37

In this study, the use of cubosomes for topical delivery of the antimicrobial peptide (AMP) LL-37 was investigated. Topical delivery of AMPs is of great interest for treatment of skin infections caused by bacteria, such as Staphylococcus aureus. AMP containing cubosomes were produced by three different preparation protocols and compared: (i) pre-loading, where LL-37 was incorporated into a liquid crystalline gel, which thereafter was dispersed into nanoparticles, (ii) post-loading, where LL-37 was let to adsorb onto pre-formed cubosomes, and (iii) hydrotrope-loading, where LL-37 was incorporated during the spontaneously formed cubosomes in an ethanol/glycerol monooleate mixture. Particle size and size distribution were analyzed using dynamic light scattering (DLS), liquid crystalline structure by small angle x-ray scattering (SAXS) and release of LL-37 by a fluorescamine assay. Proteolytic protection of LL-37 as well as bactericidal effect after enzyme exposure was investigated. The skin irritation potential of cubosomes was examined by an in vitro epidermis model. Finally, the bacterial killing property of the cubosomes was examined by an ex vivo pig skin wound infection model with Staphylococcus aureus. Data showed that a high loading of LL-37 induced formation of vesicles in case of cubosomes prepared by sonication (pre-loading). No release of LL-37 was observed from the cubosomes, indicating strong association of the peptide to the particles. Proteolysis studies showed that LL-37 was fully protected against enzymatic attacks while associated with the cubosomes, also denoting strong association of the peptide to the particles. As a consequence, bactericidal effect after enzyme exposure remained, compared to pure LL-37 which was subjected to proteolysis. No skin irritation potential of the cubosomes was found, thus enabling for topical administration. The ex vivo wound infection model showed that LL-37 in pre-loaded cubosomes killed bacteria most efficient.