Development of Cetylpyridinium-Alginate Nanoparticles: A Binding and Formulation Study

Polyelectrolyte-Surfactant Complex Nanofibrous Membranes for Antibacterial Applications

Polyelectrolyte-surfactant complexes (PESCs) have garnered significant attention due to their extensive range of biological and industrial applications. Most present applications are predominantly used in liquid or emulsion states, which limits their efficacy in solid material-based applications. Herein, pre-hydrolyzed polyacrylonitrile (HPAN) and quaternary ammonium salts (QAS) are employed to produce PESC electrospun membranes via electrospinning. The formation process of PESCs in a solution is observed. The results show that the degree of PAN hydrolysis and the varying alkyl chain lengths of surfactants affect the rate of PESC formation. Moreover, PESCs/PCL hybrid electrospun membranes are fabricated, and their antibacterial activities against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) are investigated. The resulting electrospun membranes exhibit high bactericidal efficacy, which enables them to serve as candidates for future biomedical and filtration applications.

Unraveling the phase behavior of cricket protein isolate and alginate in aqueous solution

The associative phase behavior of cricket protein isolate (CPI) and sodium alginate (AL) in aqueous solutions was explored using turbidimetry, methylene blue spectroscopy, zeta potentiometry, dynamic light scattering, and confocal microscopy as a function of pH, biopolymer ratio, total biopolymer concentration (C_T), and ionic strength. When both biopolymers had net-negative charges, soluble complexes formed between pH 6.0 and 8.0, however when both biopolymers had opposing net charges, insoluble complexes formed as complex coacervates below pH 5.5, defined as pH_φ1, followed by precipitates below another critical pH 3.0 (pH_p). Increasing the CPI:AL weight ratio or C_T facilitated complex formation, and the addition of salts (NaCl/KCl) had a salt-enhancement and salt-reduction impact at low and high salt concentrations, respectively. Ionic interactions between oppositely charged CPI and AL were mainly responsible for the formation of their insoluble complexes, while hydrogen bonding and hydrophobic interactions also played significant roles.

Local drug delivery systems for inflammatory diseases: Status quo, challenges, and opportunities

Inflammation that is not resolved in due course becomes a chronic disease. The treatment of chronic inflammatory diseases involves a long-term use of anti-inflammatory drugs such as corticosteroids and nonsteroidal anti-inflammatory drugs, often accompanied by dose-dependent side effects. Local drug delivery systems have been widely explored to reduce their off-target side effects and the medication frequency, with several products making to the market or in development over the years. However, numerous challenges remain, and drug delivery technology is underutilized in some applications. This review showcases local drug delivery systems in different inflammatory diseases, including the targets well-known to drug delivery scientists (e.g., joints, eyes, and teeth) and other applications with untapped opportunities (e.g., sinus, bladder, and colon). In each section, we start with a brief description of the disease and commonly used therapy, introduce local drug delivery systems currently on the market or in the development stage, focusing on polymeric systems, and discuss the remaining challenges and opportunities in future product development.

Polyelectrolyte-surfactant-complex nanoparticles as a delivery platform for poorly soluble drugs: A case study of ibuprofen loaded cetylpyridinium-alginate system

Previously, we reported on the surfactant cetylpyridinium chloride (CPC) as a crosslinker of alginate for the formation of stable polyelectrolyte-surfactant-complex nanoparticles. Here, we evaluate this system for increased solubility of a poorly soluble drug. The aim was to use CPC for solubilisation of ibuprofen and to use the micellar associates formed for alginate complexation and nanoparticle formation. We acquired deeper insights into the entropy led interactions between alginate, CPC and ibuprofen. Stable nanoparticles were formed across limited surfactant-to-polyelectrolyte molar ratios, with ~150 nm hydrodynamic diameter, monodispersed distribution, and negative zeta potential (-40 mV), with 34% ibuprofen loading. Their structure was obtained using small-angle X-ray scattering, which indicated disordered micellar associates when ibuprofen was incorporated. This resulted in nanoparticles with a complex nanostructured composition, as shown by transmission electron microscopy. Drug release from ibuprofen-cetylpyridinium-alginate nanoparticles was not hindered by alginate, and was similar to the release kinetics from ibuprofen-CPC solubilisates. These innovative carriers developed as polyelectrolyte-surfactant complexes can be used for solubilisation of poorly soluble drugs, where the surfactant simultaneously increases the solubility of the drug at concentrations below its critical micellar concentration and crosslinks the polyelectrolyte to form nanoparticles.

Local drug delivery systems in the management of periodontitis: A scientific review

Periodontitis (PD) is a microbial disease of tooth supporting tissues that results in progressive destruction of surrounding soft and hard tissues with eventual tooth mobility and exfoliation. Perioceutics, which includes the delivery of therapeutic agents via systemic and local means as an adjunct to mechanical therapy has revolutionized the arena of periodontal therapy. Selection of a right antimicrobial agent with appropriate route of drug administration is the key to successful periodontal therapy. Irrigating systems, fibers, gels, strips, films, microparticles, nanoparticles and low dose antimicrobial agents are some of the local drug delivery systems (LDDS) available in the field, which aims to deliver antimicrobial agents to sub-gingival diseased sites with minimal or no side-effects on other body sites. The present review aim to summarize the current state-of-the-art technology on LDDS in periodontal therapy ensuring the the practitioners are able to choose LDD agents which are custom made for a specific clinical condition.

Effect of Solution Composition Variables on Electrospun Alginate Nanofibers: Response Surface Analysis

Alginate is a promising biocompatible and biodegradable polymer for production of nanofibers for drug delivery and tissue engineering. However, alginate is difficult to electrospin due to its polyelectrolyte nature. The aim was to improve the 'electrospinability' of alginate with addition of exceptionally high molecular weight poly(ethylene oxide) (PEO) as a co-polymer. The compositions of the polymer-blend solutions for electrospinning were varied for PEO molecular weight, total (alginate plus PEO) polymer concentration, and PEO proportion in the dry alginate-PEO polymer mix used. These were tested for rheology (viscosity, complex viscosity, storage and loss moduli) and conductivity, and the electrospun nanofibers were characterized by scanning electron microscopy. One-parameter-at-a-time approach and response surface methodology (RSM) were used to optimize the polymer-blend solution composition to obtain defined nanofibers. Both approaches revealed that the major influence on nanofiber formation and diameter were total polymer concentration and PEO proportion. These polymer-blend solutions of appropriate conductivity and viscosity enabled fine-tuning of nanofiber diameter. PEO molecular weight of 2-4 million Da greatly improved the electrospinnability of alginate, producing nanofibers with >85% alginate. This study shows that RSM can be used to design nanofibers with optimal alginate and co-polymer contents to provide efficient scaffold material for regenerative medicine.

Poly(allylamine)/tripolyphosphate coacervates enable high loading and multiple-month release of weakly amphiphilic anionic drugs: an in vitro study with ibuprofen

When synthetic polyamines, such poly(allylamine hydrochloride) (PAH), are mixed with crosslink-forming multivalent anions, they can undergo complex coacervation. This phenomenon has recently been exploited in various applications, ranging from inorganic material synthesis, to underwater adhesion, to multiple-month release of small, water-soluble molecules. Here, using ibuprofen as a model drug molecule, we show that these coacervates may be especially effective in the long-term release of weakly amphiphilic anionic drugs. Colloidal amphiphile/polyelectrolyte complex dispersions are first prepared by mixing the amphiphilic drug (ibuprofen) with PAH. Pentavalent tripolyphosphate (TPP) ions are then added to these dispersions to form ibuprofen-loaded PAH/TPP coacervates (where the strongly-binding TPP displaces the weaker-bound ibuprofen from the PAH amine groups). The initial ibuprofen/PAH binding leads to extremely high drug loading capacities (LC-values), where the ibuprofen comprises up to roughly 30% of the coacervate mass. Conversely, the dense ionic crosslinking of PAH by TPP results in very slow release rates, where the release of ibuprofen (a small, water-soluble drug) is extended over timescales that exceed 6 months. When ibuprofen is replaced with strong anionic amphiphiles, however (i.e., sodium dodecyl sulfate and sodium dodecylbenzenesulfonate), the stronger amphiphile/polyelectrolyte binding disrupts PAH/TPP association and sharply increases the coacervate solute permeability. These findings suggest that: (1) as sustained release vehicles, PAH/TPP coacervates might be very attractive for the encapsulation and multiple-month release of weakly amphiphilic anionic payloads; and (2) strong amphiphile incorporation could be useful for tailoring PAH/TPP coacervate properties.

Gel-like coacervates prepared through ionotropic gelation enable very high loading and multiple-month release of weakly amphiphilic small molecules. Conversely, strong amphiphile incorporation disrupts ionic crosslinking and strikingly alters the coacervate properties.

Influence of different classes of crosslinkers on alginate polyelectrolyte nanoparticle formation, thermodynamics and characteristics

Complexation of linear alginate polyanions with different classes of crosslinkers (divalent cations, polycations, positively charged surfactants) was investigated, to unravel their effects on nanoparticle formation. The goal was to define the crosslinker-to-alginate molar ratios at which nanoparticles are formed, and to reveal the underlying thermodynamics and molecular interactions using dynamic and electrophoretic light scattering, isothermal titration calorimetry, and infrared spectroscopy. Alginate nanoparticles were formed across a limited range of molar ratios that was specific for each crosslinker, and had different size and stability. Thermodynamic parameters of alginate complexation with crosslinkers showed that nanoparticle formation was in all cases entropy driven, together with a minor enthalpic contribution. The crosslinking mechanism was based on ionic interactions, with accompanying weaker interactions specific for each crosslinker, and involved characteristic macroscopic association constants (K_a1) for complexation of alginate (range, 10⁴-10⁹M^-1). Additionally, the ionic strengths of the media influenced the characteristics and stabilities of the polyelectrolyte nanoparticles.

Release mechanism of doxazosin from carrageenan matrix tablets: Effect of ionic strength and addition of sodium dodecyl sulphate

The polyelectrolyte matrix tablets loaded with an oppositely charged drug exhibit complex drug-release mechanisms. In this study, the release mechanism of a cationic drug doxazosin mesylate (DM) from matrix tablets based on an anionic polyelectrolyte λ-carrageenan (λ-CARR) is investigated. The drug release rates from λ-CARR matrices are correlated with binding results based on potentiometric measurements using the DM ion-sensitive membrane electrode and with molecular characteristics of the DM-λ-CARR-complex particles through hydrodynamic size measurements. Experiments are performed in solutions with different ionic strength and with the addition of an anionic surfactant sodium dodecyl sulphate (SDS). It is demonstrated that in addition to swelling and erosion of tablets, the release rates depend strongly on cooperative interactions between DM and λ-CARR. Addition of SDS at concentrations below its critical micelle concentration (CMC) slows down the DM release through hydrophobic binding of SDS to the DM-λ-CARR complex. On the contrary, at concentrations above the CMC SDS pulls DM from the complex by forming mixed micelles with it and thus accelerates the release. Results involving SDS show that the concentration of surfactants that are naturally present in gastrointestinal environment may have a great impact on the drug release process.