Supersaturated controlled release matrix using amorphous dispersions of glipizide

Review of industrially recognized polymers and manufacturing processes for amorphous solid dispersion based formulations

Evolving therapeutic landscape through combinatorial chemistry and high throughput screening have resulted in an increased number of poorly soluble drugs. Drug delivery strategies quickly adapted to convert these drugs into successful therapies. Amorphous solid dispersion (ASD) technology is widely employed as a drug delivery strategy by pharmaceutical industries to overcome the challenges associated with these poorly soluble drugs. The development of ASD formulation requires an understanding of polymers and manufacturing techniques. A review of US FDA-approved ASD-based products revealed that only a limited number of polymers and manufacturing technologies are employed by pharmaceutical industries. This review provides a comprehensive guide for the selection and overview of polymers and manufacturing technologies adopted by pharmaceutical industries for ASD formulation. The various employed polymers with their underlying mechanisms for solution-state and solid-state stability are discussed. ASD manufacturing techniques, primarily implemented by pharmaceutical industries for commercialization, are presented in Quality by Design (QbD) format. An overview of novel excipients and progress in manufacturing technologies are also discussed. This review provides insights to the researchers on the industrially accepted polymers and manufacturing technology for ASD formulation that has translated these challenging drugs into successful therapies.

Carvedilol Precipitation Inhibition by the Incorporation of Polymeric Precipitation Inhibitors Using a Stable Amorphous Solid Dispersion Approach: Formulation, Characterization, and In Vitro In Vivo Evaluation

An amorphous solid dispersion (ASD) of carvedilol (CVL) was prepared via the solvent evaporation method, using cellulose derivatives as polymeric precipitation inhibitors (PPIs). The prepared ASDs existed in the amorphous phase, as revealed by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The Fourier-transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) results confirmed the compatibility between CVL and the polymers used. The ASDs characteristics were evaluated, with no change in viscosity, a pH of 6.8, a polydispersity index of 0.169, a particle size of 423-450 nm, and a zeta potential of 3.80 mV. Crystal growth inhibition was assessed for 180 min via an infusion precipitation study in simulated intestinal fluid (SIF). The interactions between the drug and polymers were established in great detail, using nuclear magnetic resonance (NMR) spectroscopy, nuclear Overhauser effect spectroscopy (NOESY), and Raman spectroscopy studies. Dielectric analysis was employed to determine the drug-polymer interactions between ion pairs and to understand ion transport behavior. In vivo oral kinetics and irritation studies performed on Wistar rats have demonstrated promising biocompatibility, stability, and the enhanced bioavailability of CVL. Collectively, the stable ASDs of CVL were developed using cellulose polymers as PPIs that would inhibit drug precipitation in the gastrointestinal tract and would aid in achieving higher in vivo drug stability and bioavailability.

Tailored Supersaturable Immediate Release Behaviors of Hypotensive Supersaturating Drug-Delivery Systems Combined with Hot-Melt Extrusion Technique and Self-Micellizing Polymer

The short-term immediate release of supersaturated drug-delivery systems (SDDSs) presents an interesting process that can be tailored to multi-stage release events including initial release after dosing and dissolution, evolved release over longer dissolution periods for biological absorption, and terminal release following the end of immediate release. However, although comprehensive analysis of these critical release behaviors is often ignored yet essential for understanding the supersaturable immediate-release events for supersaturable solid formations when employing new techniques or polymers matched to a particular API. Hot-melt extrusion (HME) has become a popular continuous thermodynamic disordering technique for amorphization. The self-micellizing polymer Soluplus^® is reported to be a potential amorphous and amphiphilic graft copolymer frequently used in many nano/micro supersaturable formulations. Our current work aims to develop hypotensive supersaturating solid dispersion systems (faSDDS_HME) containing the BCS II drug, felodipine, when coordinately employing the HME technique and self-micellizing Soluplus^®, and to characterize their amorphization as well as immediate release. Other discontinuous techniques were used to prepare control groups (faSDDS_SE and faSDDS_QC). Tailored initial/evolved/terminal three-stage supersaturable immediate-release behaviors were identified and possible mechanisms controlling the release were explored. HME produced the highest initial release in related faSDDS_HME. During the evolved-release period, highly extended "spring-parachute" process was found in HME-induced amorphization owing to its superior supersaturation duration. Due to the enhanced crystallization inhibition effect, faSDDS_HME displayed the strongest terminal release as measured by solubility. For release mechanisms associated with HME, molecular interaction is not the likely dominant mechanism responsible for the improved properties induced by faSDDS_HME. For release mechanisms involved with the polymer Soluplus^® itself, they were found to inhibit drug recrystallization, spontaneously solubilize the drug and lead to improved molecular interactions in all SDDS systems, which were the factors responsible for the improved release. These mechanisms play an important role for the generation of an extended multi-stage immediate release produced via HME or self-micellizing polymer. This study provides a deeper understanding on amorphization and superior multi-stage supersaturable immediate-release behaviors for a particular hypotensive supersaturated delivery system combined with an HME-based continuous manufacturing technique and self-micellizing polymer strategy.

Hydroxypropyl methylcellulose acetate succinate as an exceptional polymer for amorphous solid dispersion formulations: A review from bench to clinic

Amorphous solid dispersions (ASDs) are a proven system for achieving a supersaturated state of drug, in which the concentration of drug is greater than its crystalline solubility. The usage of Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS) in the development of ASDs has grown significantly, as evidenced by the fact that majority of commercially approved ASD formulations are based on HPMCAS. HPMCAS has been widely utilized as a solubility enhancer and precipitation inhibitor or stabilizer to achieve supersaturation and inhibit crystallization of drugs in the gastrointestinal tract. The characteristics of HPMCAS ASDs such as less hygroscopic, strong drug-polymer hydrophobic interactions, high solubilization efficiency, greater potential to generate, maintain drug supersaturation and crystallization inhibition outperform other polymeric carriers in ASD development. Furthermore, combining HPMCAS with other polymers or surfactants as ternary ASDs could be a viable approach for enhancing oral absorption of poorly soluble drugs. This review discusses the concepts of supersaturation maintenance or precipitation inhibition of HPMCAS in the ASD formulations. In addition, the mechanisms underlying for improved dissolution performance, oral bioavailability and stability of HPMCAS ASDs are explored.

Solid dispersion technology as a formulation strategy for the fabrication of modified release dosage forms: A comprehensive review

Solubility limited bioavailability is one of the crucial parameters that affect the formulation development of the new chemical entities. Thus the major constraint in the pharmaceutical product development is the suitable solubility enhancement technique for Active Pharmaceutical Ingredient. Solid dispersion (SD) is an established and preferred method for improving the solubility which ultimately may be helpful to enhance bioavailability. For long period of time Amorphous solid dispersion (ASD) have been preferred for improving solubility, but since last two decades, ASD approach have been combined with different modified release approaches to improvise the stability and site specificity of SD to grasp a hold over the specific advantages associated with such dosage forms. It is an established fact now that the SD technique not only improves solubility limited bioavailability, but it may be combined with other approaches to modify the drug release profile from the formulation as per the requirement based on the apt selection of SD carriers and suitable technology. This review covers the comprehensive overview of all such formulations where SD technology is used to serve dual purpose rather than only the sole purpose of solubility enhancement. The SD approach has been successfully implemented for some of the poorly soluble herbal drugs and still there is a vast scope of advancement in that area. The current review will provide a broad outcome in the area of SD technology for modified release formulations along with the description of current status and future prospective of SD. The SD formed by dispersing drug within the conventional carrier to form ASD increases solubility, dissolution rate and bioavailability; whereas fourth generation hydrophobic carriers provide added advantage of controlled release (CR) or sustained release (SR) profile along with enhanced stability of SD. On the other frontier, pH dependant carriers enable the SD to achieve site specificity or delayed release (DR) profile.

Hot Melt Extrusion-Triggered Amorphization as a Continuous Process for Inducing Extended Supersaturable Drug Immediate-Release from saSMSDs Systems

Hot melt extrusion (HME), a continuous manufacturing process for generating supersaturating amorphous self-micellizing solid dispersion systems (saSMSDs), holds promise for achieving amorphization of many pharmaceutical formulations. For saSMSDs generation, HME-triggered continuous processes offer advantages over traditional non-continuous processes such as fusion/quench cooling (FQC) and co-precipitation (CP). Here we employed HME, FQC, and CP to generate saSMSDs containing the water-insoluble BCS II drug nitrendipine (NIT) and self-micellizing polymer Soluplus^®. Scanning electron microscopy, powder X-ray diffraction, and differential scanning calorimetry results revealed that saSMSDs formed when NIT–Soluplus^® mixtures were subjected to the abovementioned amorphization methods. All saSMSDs outperformed crystalline NIT preparations and physical mixtures in achieving extended supersaturable immediate release states with superior solubility, “spring-parachute” process characteristics, and dissolution behaviors. Notably, Fourier transform-infrared spectroscopic results obtained for saSMSDs detected hydrogen bonding interactions between the drug and the carrier. Ultimately, our results revealed the advantages of HME-triggered amorphization as a continuous process for significantly improving drug dissolution, increasing solubility, and maintaining supersaturation as compared to traditional amorphization-based techniques.

Hot-melt extruded hydroxypropyl methylcellulose acetate succinate based amorphous solid dispersions: Impact of polymeric combinations on supersaturation kinetics and dissolution performance

Nucleation inhibition and maintenance of drug supersaturation over a prolonged period are desirable for improving oral absorption of amorphous solid dispersions. The present study investigates the impact of binary and ternary amorphous solid dispersions on the supersaturation kinetics of nifedipine using the polymers hydroxypropylmethylcellulose acetate succinate (HPMCAS) LG, and HG, Eudragit® RSPO, Eudragit® FS100, Kollidon® VA64 and Plasdone™ K-29/32. The amorphous solubility, nucleation induction time, and particle size analysis of nifedipine in a supersaturated solution were performed with and without the presence of polymers, alone or in combination. The HPMCAS-HG and HPMCAS-HG + LG combinations showed the highest nifedipine amorphous solubility of 169.47, 149.151 µg/mL, respectively and delay in nucleation induction time up to 120 min compared to other polymeric combinations. The solid dispersions prepared via hot melt extrusion showed the transformation of crystalline nifedipine to amorphous form. The in-vitro non-sink dissolution study revealed that although the binary nifedipine/HPMCAS-LG system had shown the greater supersaturation concentration of 66.1 µg/mL but could not maintain a supersaturation level up to 360 min. A synergistic effect emerged for ternary nifedipine/HPMCAS-LG/HPMCAS-HG, and nifedipine/HPMCAS-LG/Eudragit®FS100 systems maintained the supersaturation level with enhanced dissolution performance, demonstrating the potential of polymeric combinations for improved amorphous solid dispersion performance.

Optimization of Spray-Drying Parameters for Formulation Development at Preclinical Scale

Spray-drying dispersion (SDD) is a well-established manufacturing technique used to prepare amorphous solid dispersions (ASDs), allowing for poorly soluble drugs to have improved bioavailability. However, the process of spray-drying with multiple factors and numerous variables can lead to a lengthy development timeline with intense resource requirements, which becomes the main obstacle limiting spray-drying development at the preclinical stage. The purpose of this work was to identify optimized preset parameters for spray-drying to support the early development of ASDs suitable for most circumstances rather than individual optimization. First, a mini-DoE (Design of Experiment) study was designed to evaluate the critical interplay of two key variables for spray-drying using a BUCHI B-290 mini spray dryer: solid load and atomizing spray gas flow. The critical quality attributes (CQAs) of the ASDs, including yield, particle size, morphology, and in vitro release profile, were taken into account to identify the impact of the key variables. The mini-DoE results indicated that a 5% solid load (w/v %) and 35 mm height atomizing spray gas flow were the most optimized parameters. These predefined values were further verified using different formulation compositions, including various polymers (Eudragit L100-55, HPMCAS-MF, PVAP, and PVP-VA64) and drugs (G-F, GEN-A, Indomethacin, and Griseofulvin), a range of drug loading (10 to 40%), and scale (200 mg to 200 g). Using these predefined parameters, all ASD formulations resulted in good yields as well as consistent particle size distribution. This was despite the differences in the formulations, making this a valuable and rapid approach ideal for early development. This strategy of leveraging the preset spray-drying parameters was able to successfully translate into a reproducible and efficient spray-drying platform while also saving material and reducing developmental timelines in early-stage formulation development.

Scale-up of pharmaceutical spray drying using scale-up rules: A review

Spray drying is one of the widely used manufacturing processes in pharmaceutical industry. While there are voluminous experimental studies pertaining to the impact of various process-formulation parameters on the quality attributes of spray dried powders such as particle size, morphology, density, and crystallinity, there is scant information available in the literature regarding process scale-up. Here, we first analyze salient features of scale-up attempts in literature. Then, spray drying process is analyzed considering the fundamental physical transformations involved, i.e., atomization, drying, and gas-solid separation. Each transformation is scrutinized from a scale-up perspective with non-dimensional parameters & multi-scale analysis, and comprehensively discussed in engineering context. Successful scale-up entails similar key response variables from each transformation across various scales. These variables are identified as droplet size distribution, outlet temperature, relative humidity, separator pressure loss coefficient, and collection efficiency. Instead of trial-and-error-based approaches, this review paper advocates the use of mechanistic models and scale-up rules for establishing design spaces for the process variables involved in each transformation of spray drying. While presenting a roadmap for process development and scale-up, the paper demonstrates how to bridge the current gap in spray drying scale-up via a rational understanding of the fundamental transformations.

Stabilizing supersaturated drug-delivery system through mechanism of nucleation and crystal growth inhibition of drugs

A supersaturated drug-delivery system is capable of enhancing oral bioavailability of hydrophobic drugs. Maintenance of the supersaturated system both in vitro and in vivo is one of the most challenging parts, for that it is required to keenly understand the nucleation and crystal growth behavior. Polymers are widely used to stabilize supersaturated solutions; screening of polymers is done on the basis of their interaction with drug. Nucleation and crystal growth inhibition and drug–polymer interactions can be investigated by using various spectroscopic methods. Various formulations are prepared as supersaturated systems using different drug-delivery systems utilizing different polymers, which illustrates that supersaturation is worthwhile to increase the solubility and hence oral bioavailability of poorly soluble drugs.

Investigate the effect of solvents on wet granulation of microcrystalline cellulose using hydroxypropyl methylcellulose as a binder and evaluation of rheological and thermal characteristics of granules

Wet granulation is the most commonly used technique in the pharmaceutical industry for delivering oral solid dosage forms. In wet granulation, the binder solvent is one of the critical factors affecting granule properties. In the current study, an attempt was made to investigate the effect of solvents (aqueous and hydro-alcoholic) on thermal and flow properties of Microcrystalline Cellulose (MCC) granules prepared using two different grades of Hydroxypropyl Methylcellulose (HPMC), which served as an effective binder. The granulation endpoint was evaluated using thermal effusivity sensor. Rheometer and Modulated Differential Scanning Calorimetry (mDSC) was used to study the flow and thermal properties of wet and dried granules. Furthermore, physical characterization was carried out by granule strength, particle size distribution and tablet hardness for all granules under the study. Thermal effusivity sensor results indicate 55% w/w concentration of binder solution as the endpoint by measuring thermal effusivity for both binders. Additionally, powder rheometer results show that the wet granules of hydro-alcoholic batches show greater resistance to flow whereas the dried granules display excellent flow characteristics as evident from Basic flowability energy values and specific energy values. Permeability results suggest that the granules formed with hydro-alcoholic binder solvent exhibit better porosity and permeability. Tablet hardness data showed that tablets formulated using hydro-alcoholic solvent granules have greater hardness than tablets formulated using water based solvent granules. The granule strength for water based granules is relatively higher than that of hydro-alcoholic based granules. mDSC thermograms show a sharp rise in enthalpy value at 55% w/w binder solution which is indicative of a more significant amount of solvent being present on the surface of granules and formation of optimal granules. To summarize, we have determined a technique to measure endpoint determination and simultaneously investigate the role of solvent systems on the rheology of MCC granules, which could assist in selecting an appropriate solvent system for granulation.

Recent strategies in spray drying for the enhanced bioavailability of poorly water-soluble drugs

Poorly water-soluble drugs are a significant and ongoing issue for the pharmaceutical industry. An overview of recent developments for the preparation of spray-dried delivery systems is presented. Examples include amorphous solid dispersions, spray dried dispersions, microparticles, nanoparticles, surfactant systems and self-emulsifying drug delivery systems. Several aspects of formulation are considered, such as pre-screening, choosing excipient(s), the effect of polymer structure on performance, formulation optimisation, ternary dispersions, fixed-dose combinations, solvent selection and component miscibility. Process optimisation techniques including nozzle selection are discussed. Comparisons are drawn with other preparation techniques such as hot melt extrusion, freeze drying, milling, electro spinning and film casting. Novel analytical and dissolution techniques for the characterization of amorphous solid dispersions are included. Progress in understanding of amorphous supersaturation or recrystallisation from solution gathered from mechanistic studies is discussed. Aspects of powder flow and compression are considered in a section on downstream processing. Overall, spray drying has a bright future due to its versatility, efficiency and the driving force of poorly soluble drugs.