Development of biomedical 5-fluorouracil nanoplatforms for colon cancer chemotherapy: Influence of process and formulation parameters

Human mesenchymal stromal cells-laden crosslinked hyaluronic acid-alginate bioink for 3D bioprinting applications in tissue engineering

Three-dimensional (3D) bioprinting is considered one of the most advanced tools to build up materials for tissue engineering. The aim of this work was the design, development and characterization of a bioink composed of human mesenchymal stromal cells (hMSC) for extrusion through nozzles to create these 3D structures that might potentially be apply to replace the function of damaged natural tissue. In this study, we focused on the advantages and the wide potential of biocompatible biomaterials, such as hyaluronic acid and alginate for the inclusion of hMSC. The bioink was characterized for its physical (pH, osmolality, degradation, swelling, porosity, surface electrical properties, conductivity, and surface structure), mechanical (rheology and printability) and biological (viability and proliferation) properties. The developed bioink showed high porosity and high swelling capacity, while the degradation rate was dependent on the temperature. The bioink also showed negative electrical surface and appropriate rheological properties required for bioprinting. Moreover, stress-stability studies did not show any sign of physical instability. The developed bioink provided an excellent environment for the promotion of the viability and growth of hMSC cells. Our work reports the first-time study of the effect of storage temperature on the cell viability of bioinks, besides showing that our bioink promoted a high cell viability after being extruded by the bioprinter. These results support the suggestion that the developed hMSC-composed bioink fulfills all the requirements for tissue engineering and can be proposed as a biological tool with potential applications in regenerative medicine and tissue engineering.

Development and characterization of a poloxamer hydrogel composed of human mesenchymal stromal cells (hMSCs) for reepithelization of skin injuries

Wound healing is a natural physiological reaction to tissue injury. Hydrogels show attractive advantages in wound healing not only due to their biodegradability, biocompatibility and permeability but also because provide an excellent environment for cell migration and proliferation. The main objective of the present study was the design and characterization of a hydrogel loaded with human mesenchymal stromal cells (hMSCs) for use in would healing of superficial skin injures. Poloxamer 407® was used as biocompatible biomaterial to embed hMSCs. The developed hydrogel containing 20 % (w/w) of polymer resulted in the best formulation with respect to physical, mechanical, morphological and biological properties. Its high swelling capacity confirmed the hydrogel's capacity to absorb wounds' exudate. LIVE/DEAD® assay confirm that hMSCs remained viable for at least 48 h when loaded into the hydrogels. Adding increasing concentrations of hMSCs-loaded hydrogel to the epithelium did not affect keratinocytes' viability and healing capacity and all wound area was closed in less than one day. Our study opens opportunities to exploit poloxamer hydrogels as cell carriers for the treatment of skin superficial wound.

Crystal plane-integrated strontium oxide/hexagonal boron nitride nanohybrids for rapid electrochemical sensing of anticancer drugs in human blood serum samples

In this work, the crystal plane of strontium oxide (SrO) nanorods was integrated into hexagonal-boron nitride (h-BN) nanosheets to form 1D-2D (SrO/h-BN) composite were utilized for the electrochemical detection of the chemotherapeutic drug 5-fluorouracil (5-Fu). 5-Fu is a clinically proven and the third most frequently applied chemotherapeutic drug for treating solid tumours, such as colorectal, stomach, cutaneous and breast malignancies. Its overdoses lead to toxic metabolite accumulation that has serious adverse consequences on humans, including neurotoxicity, death and the induction of morbidity. Therefore, to improve the chemotherapy and predict the potential adverse effects of 5-Fu residues in the human body, susceptible and quick analytical methods for detecting 5-Fu in human body fluids (blood serum/plasma and urine) are needed. The effective interaction of the synthesized SrO/h-BN composite shows increased efficiency for the electrochemical detection of 5-Fu with good selectivity. Notably, a simple sonochemical method achieved a synergistic interaction between the (100) plane of SrO and the (002) plane of h-BN. Various analytical and spectroscopic techniques were used to characterize the SrO/h-BN nanocomposite, which provided useful insights into the composition and properties of the composite material. The crystalline, structural and chemical characteristics of the as-synthesized material were characterized by XRD, Raman spectroscopy, HR-TEM, XPS and HR-SEM. Furthermore, the proposed electrode's electrochemical sensing capability was analysed using CV, EIS, DPV and i-t curve methods. Numerous active sites created on a modified electrode enhanced the mass transport and electron transfer rate, thereby increasing the electrochemical activity towards the 5-Fu detection. Consequently, under optimized conditions, the SrO/h-BN/GCE exhibited remarkable selectivity, durability, low detection limit (0.003 μM) and wide linear range (0.02-56 μM) for 5-Fu. Finally, the successful application of this sensor for 5-Fu detection in biological samples was successfully tested with high recovery percentages.

Development of 5-fluorouracil-dichloroacetate mutual prodrugs as anticancer agents

5-Fluorouracil (5-FU) is one of the most widely applied chemotherapeutic agents with a broad spectrum of activity. However, despite this versatile activity, its use poses many limitations. Herein, novel derivatives of 5-FU and dichloroacetic acid have been designed and synthesized as a new type of codrugs, also known as mutual prodrugs, to overcome the drawbacks of 5-FU and enhance its therapeutic efficiency. The stability of the obtained compounds has been tested at various pH values using different analytical techniques, namely HPLC and potentiometry. The antiproliferative activity of the new 5-FU derivatives was assessed in vitro on SK-MEL-28 and WM793 human melanoma cell lines in 2D culture as well as on A549 human lung carcinoma, MDA-MB-231 breast adenocarcinoma, LL24 normal lung tissue, and HMF normal breast tissue as a multicellular 3D spheroid model cultured in standard (static) conditions and with the use of microfluidic systems, which to a great extent resembles the in vivo environment. In all cases, new mutual prodrugs showed a higher cytotoxic activity toward cancer models and lower to normal cell models than the parent 5-FU itself.

EpCAM aptamer activated 5-FU-loaded PLGA nanoparticles in CRC treatment; in vitro and in vivo study

In this study, epithelial cell adhesion molecule (EpCAM) aptamer-activated nanoparticles (Ap-NPs) were synthesised to enhance treatment efficiency in colorectal cancer (CRC). PLGA [poly(d, l-lactide-co-glycolide)] copolymer was fabricated by conjugation of COOH-PEG-NH₂ to PLGA-COOH through an EDC/NHS-mediated chemistry. Afterwards, 5-fluorouracil-loaded (FU) nanoparticles were prepared using the water/oil/water double emulsion solvent evaporation method. The in vitro cytotoxicity of formulations was evaluated using the MTT assay in HCT-116, CT-26 and HEK-293 cell lines. For in vivo study, tumour-bearing BALB/c mice were established by subcutaneous injection of CT-26 cell line. The results indicated that fabricated AP-FU-NPs had 101 nm size with a spherical surface, relatively homogeneously and, satisfactory encapsulation efficiency (83.93%). In vitro experiments revealed that Ap-FU-NPs had a superior in vitro cytotoxicity than both FU-NPs and free 5-FU in CT-26 and HCT-116 cells but, were significantly low toxic against HEK-293 cells relative to free 5-FU. Furthermore, in vivo results showed no significant haemolytic effect, hepatic and renal injury, or weight loss. After treatment of various animal groups with formulations, notable tumour growth delay was observed following the order: Ap-FU-NPs < FU-NPs < 5-FU < PBS. The results suggest that AP-FU-NPs could be an effective and promising carrier for 5-FU delivery to the EpCAM overexpressing CRC cells.

Co-encapsulation of paclitaxel and 5-fluorouracil in folic acid-modified, lipid-encapsulated hollow mesoporous silica nanoparticles for synergistic breast cancer treatment

A dual-loaded multi-targeted drug delivery nanosystem was constructed to simultaneously load paclitaxel (PTX) and 5-fluorouracil (5-FU) for targeted delivery and sustained release at tumor sites. Hollow mesoporous silica nanoparticles (HMSNs) were prepared by the inverse microemulsion method, then modified with folic acid and pH- and temperature-responsive materials, co-loaded with PTX and 5-FU, and finally encapsulated into lipid membranes. The obtained nanosystem was selectively internalized by human breast cancer MCF-7 cells that overexpress folate receptors through an energy-dependent process, and it released both drugs in vitro in a simulated tumor microenvironment. Moreover, the inhibitory effect of the dual-loaded nanoparticles was significantly better than that of the free drugs, suggesting that the composite nanosystem has the potential to selectively target tumor sites and perform the synergistic effect of PTX and 5-FU, while reducing their toxic effects on normal tissues.

Preparation and ex vivo investigation of an injectable microparticulate formulation for gastrointestinal mucosa polyp resection

Endoscopic submucosal dissection (ESD) and endoscopic submucosal resection (EMR) are non-invasive endoscopic techniques. They allow an early excised gastrointestinal (GI) mucosal precancerous lessions. For their application is necessary use of a submucosal injection that lift area to excise. The main objective of this study was the preparation of microparticulate-based fluid for injection in the GI submucosa. Alginate microparticles (MPs) were developed by the solvent displacement technique and characterized by particle size, surface electrical properties, swelling, degradation, rheology, adhesion and leakage, syringeablity and stability. Furthermore, their potential to form a submucosal cushion was assayed in porcine stomach mucosa and porcine colon mucosa. Results showed MPs sizes below 160 μm, negative surface charge around -50 mV at pH=6, high rates of swelling and good adhesion. The microparticulate-based fluid exhibited pseudoplastic behavior following the Ostwald-de Waele rheological model. A brief force is sufficient for its injection through a syringe. Finally, formulations were able to provide a submucosa elevation of 1.70 cm for more than 90 min and 120 min in the porcine stomach and colon, respectively.

A Tri-Stimuli Responsive (Maghemite/PLGA)/Chitosan Nanostructure with Promising Applications in Lung Cancer

A (core/shell)/shell nanostructure (production performance ≈ 50%, mean diameter ≈ 330 nm) was built using maghemite, PLGA, and chitosan. An extensive characterization proved the complete inclusion of the maghemite nuclei into the PLGA matrix (by nanoprecipitation solvent evaporation) and the disposition of the chitosan shell onto the nanocomposite (by coacervation). Short-term stability and the adequate magnetism of the nanocomposites were demonstrated by size and electrokinetic determinations, and by defining the first magnetization curve and the responsiveness of the colloid to a permanent magnet, respectively. Safety of the nanoparticles was postulated when considering the results from blood compatibility studies, and toxicity assays against human colonic CCD-18 fibroblasts and colon carcinoma T-84 cells. Cisplatin incorporation to the PLGA matrix generated appropriate loading values (≈15%), and a dual pH- and heat (hyperthermia)-responsive drug release behaviour (≈4.7-fold faster release at pH 5.0 and 45 °C compared to pH 7.4 and 37 °C). The half maximal inhibitory concentration of the cisplatin-loaded nanoparticles against human lung adenocarcinoma A-549 cells was ≈1.6-fold less than that of the free chemotherapeutic. Such a biocompatible and tri-stimuli responsive (maghemite/PLGA)/chitosan nanostructure may found a promising use for the effective treatment of lung cancer.

Nano-engineering of ketorolac tromethamine platforms for ocular treatment of inflammatory disorders

Aim: The development and optimization of Ketorolac tromethamine-loaded polylactic-co-glycolic acid nanoparticles (KT-NPs) for the treatment of inflammatory processes of the eye. Materials & methods: KT-NPs were developed by factorial design and characterized by assessing their physicochemical properties. Biopharmaceutical behavior studies, ocular tolerance, anti-inflammatory efficacy and bioavailability tests were performed on pigs. Results: Optimized KT-NPs of 112 nm, narrow distribution with encapsulation efficiency near 100% were obtained. KT release followed the Weibull model and there was significantly greater retention in the cornea and sclera than in the commercial reference. KT-NPs showed no signs of ocular irritancy and similar anti-inflammatory efficacy to the commercial reference. Conclusion: KT-NPs were a suitable alternative for the treatment of inflammatory disorders of the anterior and posterior segments of the eye as an alternative to conventional topical formulations.

Modulating the Delivery of 5-Fluorouracil to Human Colon Cancer Cells Using Multifunctional Arginine-Coated Manganese Oxide Nanocuboids with MRI Properties

5-Fluorouracil (5-FU) is one of the most prescribed drugs and the major component of chemotherapy for the treatment of colorectal cancer. In this study, we have designed arginine-functionalized manganese oxide nanocuboids (Arg@MNCs) for the effective delivery of 5-FU to colon cancer cells. Arginine was used as multifunctional agent to provide stability to MNCs, achieve high drug loading, control the release of loaded drug, and improve delivery to cancer cells. The synthesized Arg@MNCs were characterized by DLS, TEM, XRD, FTIR, XPS, TGA, and VSM analysis. The structural and morphological analysis by TEM showed cuboid-shaped MNCs with average particle size ∼15 nm. Biodegradation studies indicated that the Arg@MNCs were degraded at endolyosomal pH in 24 h while remaining stable at physiological pH. Hemolytic toxicity studies revealed the safety and nontoxic nature of the prepared MNCs. 5-FU-loaded Arg@MNCs showed significant control over the release of 5-FU, decrease in the hemolytic toxicity of loaded 5-FU but higher in vitro anticancer activity against HCT 116 and SW480 human colon cancer cells. Importantly, both the bare MNCs and Arg@MNCs showed excellent T1 and T2MR relaxivity under 3.0 T MRI scanner. Thus, the nanostructures developed in this study, i.e., 5-FU-Arg@MNCs could overcome the issues of both MNCs (stability) and 5-FU (low drug loading and nonspecificity) and may be used as a multifunctional theranostic nanocarrier for colon cancer treatment.

Combined Therapeutic Effects of 131I-Labeled and 5Fu-Loaded Multifunctional Nanoparticles in Colorectal Cancer

Background

Owing to its combined effects, the co-delivery of different therapeutics is a promising option for the treatment of cancer. In the present study, tumor-targeting poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) nanoparticles were developed for the transportation of two molecules, namely chemotherapeutic drug 5-fluorouracil (5Fu) and radionuclide iodine-131 (¹³¹I), in a single platform.

Methods

The obtained nanoparticles (Cetuximab [Cet]-PEG-PLA-5Fu-¹³¹I) were spherical (diameter approximately 110 nm) and pH-sensitive. The targeting effect of nanoparticles via Cet was confirmed in colorectal cancer cells using a fluorescent assay. The combined effects of Cet-PEG-PLA-5Fu-¹³¹I on cell viability and apoptosis were evaluated in colorectal cancer cells by Cell Counting Kit-8 and flow cytometry assays.

Results

Blank nanoparticles (Cet-PEG-PLA) showed good biocompatibility, and Cet-PEG-PLA-5Fu-¹³¹I nanoparticles were the most effective in terms of inhibition of cell viability and induction of apoptosis compared with monotherapy using Cet-PEG-PLA-5Fu or Cet-PEG-PLA-¹³¹I. In the xenograft mouse model, compared with using Cet-PEG-PLA-5Fu or Cet-PEG-PLA-¹³¹I alone, Cet-PEG-PLA-5Fu-¹³¹I nanoparticles exhibited prolonged circulation in the blood and accumulation in the tumor, thus resulting in enhanced antitumor efficacy. Additionally, combined radio-chemotherapy with Cet-PEG-PLA-5Fu-¹³¹I nanoparticles was associated with smaller tumor sizes than monotherapy, revealing the superior antitumor effects of Cet-PEG-PLA-5Fu-¹³¹I nanoparticles. These effects were further evidenced by histological and immunohistochemical analyses.

Conclusion

The multifunctional Cet-PEG-PLA-5Fu-¹³¹I nanoparticles are promising candidates for the co-delivery of 5Fu-mediated chemotherapy and ¹³¹I-mediated radiotherapy.

Design and evaluation of a multifunctional thermosensitive poloxamer-chitosan-hyaluronic acid gel for the treatment of skin burns

The main goal of this study was the design, development and characterization of a poloxamer/chitosan/hyaluronic based vehicle including three biological antioxidant molecules such as vitamins A, D and E aimed at improving the treatment of skin burns. The physical characterization of hydrogel, its mechanical and rheological properties as well as internal structure were investigated. Furthermore, biological characteristics such as ex vivo antimicrobial properties and in vivo wound healing were also accomplished and compared with a commercial reference. Results showed optimal physicochemical properties with biocompatible pH value of 4.6 ± 0.1 and zeta potential dependent on pH. The swelling rate was around 350% with optimal wettability, adhesion and leakage properties, as well as thermosensitive gelation processes. The microbiological assay demonstrated similar antimicrobial activity to that of commercial reference. In vivo tolerance study revealed no skin reactions. Finally, the wound healing efficacy of hydrogel in skin burn model showed dermal appendages and similar epidermis, dermis and stratum corneum to the commercial reference. These findings indicated that our hydrogel loading vitamins could be considered an outstanding candidate for further clinical studies.

Biopharmaceutical profile of a clotrimazole nanoemulsion: Evaluation on skin and mucosae as anticandidal agent

Clotrimazole (CLT) was formulated in a nanoemulsion (NE) for the topical treatment of candidiasis consisting of 10% labrafac^® lipophile, 60% labrasol^®:capryol^® 90 mixture (ratio 4:1) and 30% propylene glycol. Physicochemical properties, stability, rheology, in vitro drug release, ex vivo drug permeation through human skin and porcine buccal, sublingual and vaginal mucosae, antifungal efficacy, as well as in vivo skin tolerance were evaluated. 1% CLT-NE (CLT-NE1) and 2% CLT-NE (CLT-NE2) exhibited 153 ± 17.25 and 186 ± 15.38 nm droplet sizes, low polydispersity indexes, negative zeta potentials and biocompatible pH values. The CLT-NEs exhibited typical Newtonian profiles with viscosities of 42.14 ± 0.037 mPa·s and 41.35 ± 0.041 mPa·s, respectively and higher extensibility properties than commercial counterparts retaining their physicochemical properties for 180 days. NEs provided a sustained release of drug according to the first order model. Similar skin permeation properties were observed between CLT-NE1 and commercial reference. However, significant higher CLT amounts retained in mucosae were provided by CLT-NE2 when compared with references. Antifungal efficacies were also higher than commercial references, and the in vivo tolerance study confirmed the suitability for topical application, making CLT-NEs a great tool for clinical investigation of topical candidiasis treatments.

Colorectal cancer combination therapy using drug and gene co-delivered, targeted poly(ethylene glycol)-ε-poly(caprolactone) nanocarriers

Purpose

Combination therapy is a promising strategy to treat cancer due to the synergistic effects. The drug and gene co-delivered systems attract more attention in the field of combination therapy.

Materials and methods

In the present research, poly(ethylene glycol)-ε-poly(caprolactone) block copolymer was used for the co-loading of 5-fluorouracil (5-FU) and gene. The physicochemical characteristics, in vitro and in vivo anticancer, and gene transfection efficiency were tested on colon cancer cells and tumor-bearing mice.

Results

5-FU and gene co-loaded nanocarriers had a size of 145 nm. In vivo gene delivery results showed about 60% of gene-positive cells. Tumor volume of nanocarrier groups at day 21 was around 320 mm³, which is significantly smaller compared with free 5-FU group (852 mm³) and control group (1,059 mm³). The maximum 5-FU plasma concentration in nanocarrier groups (49 µg/mL) was significantly greater than free 5-FU (13 µg/mL). At 24 hours, drug level of nanocarrier groups was about 2.8 µg/mL compared with 0.02 µg/mL of free 5-FU.

Conclusion

The resulting nanocarriers co-loaded with the anticancer drugs and genes could be considered as a promising nanomedicine for colorectal cancer therapy.