Investigation of microemulsion and microemulsion gel formulations for dermal delivery of clotrimazole

Advance and Challenges in the Treatment of Skin Diseases with the Transdermal Drug Delivery System

Skin diseases are among the most prevalent non-fatal conditions worldwide. The transdermal drug delivery system (TDDS) has emerged as a promising approach for treating skin diseases, owing to its numerous advantages such as high bioavailability, low systemic toxicity, and improved patient compliance. However, the effectiveness of the TDDS is hindered by several factors, including the barrier properties of the stratum corneum, the nature of the drug and carrier, and delivery conditions. In this paper, we provide an overview of the development of the TDDS from first-generation to fourth-generation systems, highlighting the characteristics of each carrier in terms of mechanism composition, penetration method, mechanism of action, and recent preclinical studies. We further investigated the significant challenges encountered in the development of the TDDS and the crucial significance of clinical trials.

Trilayer dissolving polymeric microneedle array loading Rose Bengal transfersomes as a novel adjuvant in early-stage cutaneous melanoma management

Melanoma remains a global concern, but current therapies present critical limitations pointing out the urgent need for novel strategies. Among these, the cutaneous delivery of drugs selectively damaging cancer cells is highly attractive. Rose Bengal (RB) is a dye exhibiting selective cytotoxicity towards melanoma, but the high water solubility and low permeability hinder its therapeutic potential. We previously developed RB-loaded transfersomes (RBTF) to mediate the RB dermal delivery; however, a platform efficiently delivering RBTF in the deepest strata is essential for a successful therapeutic activity. In this regard, dissolving microneedles release the encapsulated cargo up to the dermis, painlessly piercing the outmost skin layers. Therefore, herein we developed and characterised a trilayer dissolving microneedle array (RBTF-TDMNs) loading RBTF to maximise RBTF intradermal delivery in melanoma management. RBTF-TDMNs were proven strong enough to pierce excised porcine skin and rapidly dissolve and deposit RBTF intradermally while maintaining their physicochemical properties. Also, 3D visualisation of the system itself and while penetrating the skin was performed by multi-photon microscopy. Finally, a dermatokinetic study showed that RBTF-TDMNs offered unique delivery efficiency advantages compared to RBTF dispersion and free drug-loaded TDMNs. The proposed RBTF-TDMNs represent a valuable potential adjuvant tool for the topical management of melanoma.

Microfluidic preparation of a novel phoxim nanoemulsion pesticide against Spodoptera litura

With continuous development of pesticide dosage forms, emulsifiable concentrates using large amounts of organic solvents are gradually obsoleted. Nanoemulsions with high water content have been developed and the preparation processes also evolved, but these processes still exist some problems, such as poor controllability and high energy consumption. Microfluidic is a controllable nanoemulsion preparation system which mainly applied to pharmaceutical synthesis. In this study, the pesticide phoxim nanoemulsion was prepared by microfluidic technology. The optimized formulation of phoxim nanoemulsion was composed of Tween 80 and pesticide emulsifier 500 as surfactant, hexyl acetate as oil, and n-propanol as co-surfactant. Moreover, when the flow rates of water and oil in the microfluidic system were adjusted to 5 μL/min and 20 μL/min, phoxim nanoemulsion was obtained with a cloud point/boiling point of 109 °C, a particle size of 21.5 ± 0.8 nm and a potential value of - 18.7 ± 0.6 mV. Furthermore, the nanoemulsion had a rapid release effect in vitro which could be fitted by the Ritger-Peppas model. The feeding toxicity of the phoxim nanoemulsion was higher than that of commercial formulation while the contact killing effect was higher than that of the active ingredient. Therefore, pesticide dosage was reduced and the insecticidal effect was enhanced by using phoxim nanoemulsions. These results also confirm the potential of microfluidics as a green process to produce pesticide nanoemulsions.

Microemulsions formed by PPG-5-CETETH-20 at low concentrations for transdermal delivery of nifedipine: Structural and in vitro study

Nifedipine is a potent anti-hypertensive, which is poorly orally bioavailable on account of first-pass metabolism, short half-life, and low water solubility. This study aimed to develop a microemulsified system with low surfactant concentration and to evaluate the influence of microemulsion (ME) phase behavior on skin permeation of nifedipine, as drug model. Thereafter, MEs were obtained using PPG-5-CETETH-20, oleic acid, and phosphate buffer at pH 5.0. The selected MEs were isotropic, with droplet diameters less than 10 nm, polydispersity index < 0.25, and pH between 5.0 and 5.2. MEs presented low viscosity and Newtonian behavior. SAXS results confirmed bicontinuous and oil-in-water (o/w) MEs formation. The presence of the drug promoted only very slight modifications in the ME structure. The MEs presented ability to deliver nifedipine via the transdermal route when in comparison with the control. Nevertheless, the skin permeated and retained amounts from the o/w and bicontinuous formulations did not differ significantly. The ATR-FTIR demonstrated that both formulations promoted fluidization and disorganization of lipids and increased the drug diffusion and partition coefficients in the skin. In conclusion, PPG-5-CETETH-20 MEs obtained proved to be effective skin permeation enhancers, acting by rising the coefficients of partition and diffusion of the nifedipine in the skin.

Dual Delivery of Fluticasone Propionate and Levocetirizine Dihydrochloride for the Management of Atopic Dermatitis Using a Microemulsion-Based Topical Gel

The current study investigates the potential for topical delivery of a fluticasone propionate (FP) and levocetirizine dihydrochloride (CTZ)-loaded microemulsion (ME) for the management of atopic dermatitis. Various microemulsion components were chosen based on their solubility and emulsification capabilities, and the ternary phase diagram was constructed. A total of 12 microemulsion formulations were screened for various attributes like vesicle size, polydispersity index, ζ-potential, percent transmittance, density, and pH. The average globule size and ζ-potential of FP and levocetirizine-containing ME were 52.12 nm and -2.98 ζ-potential, respectively. Transmission electron microscopy confirmed the spherical nature of the globules. The developed system not only controlled the release of both drugs but also enhanced the efficacy of the drugs on a rodent model. Histopathological studies confirmed the safety of the developed system. The present findings provide evidence for a scalable and simpler approach for the management of atopic dermatitis.

Microemulsified Gel Formulations for Topical Delivery of Clotrimazole: Structural and In Vitro Evaluation

Microemulsified gels (μEGs) with fascinating functions have become indispensable as topical drug delivery systems due to their structural flexibility, high stability, and facile manufacturing process. Topical administration is an attractive alternative to traditional methods because of advantages such as noninvasive administration, bypassing first-pass metabolism, and improving patient compliance. In this article, we report on the new formulations of microemulsion-based gels suitable for topical pharmaceutical applications using biocompatible and ecological ingredients. For this, two biocompatible μE formulations comprising clove oil/Brij-35/water/ethanol (formulation A) and clove oil/Brij-35/water/1-propanol (formulation B) were developed to encapsulate and improve the load of an antimycotic drug, Clotrimazole (CTZ), and further gelatinized to control the release of CTZ through skin barriers. By delimiting the pseudo-ternary phase diagram, optimum μE formulations with clove oil (∼15%) and Brij-35 (∼30%) were developed, keeping constant surfactant/co-surfactant ratio (1:1), to upheld 2.0 wt % CTZ. The as-developed formulations were further converted into smart gels by adding 2.0 wt % carboxymethyl cellulose (CMC) as a cross-linker to adhere to the controlled release of CTZ through complex skin barriers. Electron micrographs show a fine, monodispersed collection of CTZ-μE nanodroplets (∼60 nm), which did not coalesce even after gelation, forming spherical CTZ-μEG (∼90 nm). However, the maturity of CTZ nanodroplets observed by dynamic light scattering suggests the affinity of CTZ for the nonpolar microenvironment, which was further supported by the peak-to-peak correlation of Fourier transform infrared (FTIR) analysis and fluorescence measurement. In addition, HPLC analysis showed that the in vitro permeation release of CTZ-μEG from rabbit skin in the ethanolic phosphate buffer (pH = 7.4) was significantly increased by >98% within 6.0 h. This indicates the sustained release of CTZ in μEBG and the improvement in transdermal therapeutic efficacy of CTZ over its traditional topical formulations.

Comparative efficacy evaluation of different penetration enhancement strategies for dermal delivery of poorly soluble drugs - A case with sertaconazole nitrate

The aim of this study was to compare the efficacy of different approaches for enhancement of dermal availability of the highly lipophilic antifungal model drug - sertaconazole nitrate (SN). For this purpose, a physical penetration enhancer - dissolving microneedles (MNs) was fabricated by filling moulds with liquid formulation based on polyvinylpyrrolidone and loaded with SN. Dissolving MNs were characterised regarding their morphological and mechanical characteristics. A penetration enhancement efficacy of MNs was evaluated in vitro using porcine ear skin in parallel with the efficacy of formerly developed chemical penetration enhancer - biocompatible microemulsion (ME) formulation. Moreover, an ability of solid silicon MNs to significantly improve delivery of SN from ME into the skin has also been investigated. The obtained results showed that dissolving MNs had satisfying morphological properties and mechanical strength. This type of MNs provided comparable drug deposition in the skin as ME formulation, but also revealed an indication of percutaneous absorption of a portion of the administered drug dose. However, the penetration/permeation study results were largely influenced by experimental setup and dosing regimen. Although solid silicon MNs assisted SN dermal delivery led to increase of drug cutaneous retention (1.9-fold) under infinite dosing regimen, the synergistic action of solid MNs and ME applied under finite dosing was more pronounced in comparison with the application either of physical (dissolving MNs) or chemical enhancer (ME) alone. Namely, SN amount accumulated into the skin increased up to 4.67 and 4.37 folds in comparison with ME and dissolving MNs alone, respectively, while reaching a significant decrease in drug permeation through the skin compared to the use of dissolving MNs. Application of ME per se was the only approach that provided selective in vitro dermal drug delivery without SN permeation across the skin. However, despite both types of the used MNs lead to SN permeation in vitro, the ratio between the drug amount deposited in the skin and SN content permeated was significantly higher for the combined approach (12.05) than for dissolving MNs (2.10). Therefore, a combination of solid silicon MNs and biocompatible ME favoured more pronouncedly SN skin accumulation, which is preferable in the treatment of skin fungal infections.

On line kinetic analysis of permeation profiles for UV filter loaded microemulsions using an automatic system with spectroscopic detection and a chemometric approach

The analysis of the permeation kinetics of new UV filter formulations is of great importance since the kinetic parameters are related to the effectiveness of the product over time. The dynamics of this process can be evaluated by means of the calculation of the permeation kinetic constants, which can be obtained from the respective permeation profiles. This paper is aimed at improving the analytical performance of permeation assays using an on-line automatic system with spectrometric detection avoiding the chromatographic procedure and the usually manual sampling steps required using the traditional Franz diffusion cell. Then, the kinetics of permeation of octyl p-methoxycinnamate loaded in different microemulsions through a synthetic membrane (polyamide) was analysed at real time by UV-Vis and fluorescence spectroscopies. The spectral data were obtained at regular intervals of time (5 min) during 60 min, and the concentration of the permeated UV-filter was at each time calculated using univariate linear calibration. The interference caused by the presence of basil essential oil (oily phase) in some microemulsion samples was overcome using synchronous fluorescence spectroscopy (Δλ = 60 nm) and partial least squares. In all cases, the permeation profiles were obtained (first-order kinetics) and the respective permeation kinetic constants were calculated. The validation of the proposed method was assessed by gas chromatographic-mass spectroscopy and non-significant differences for the obtained permeation kinetic constants were found between methods (p = 0.05). Additionally, a commercial sample was analysed with the proposed methods and the results were validated by high performance liquid chromatography technique.

Cellulose Nanocrystals for Skin Barrier Protection by Preparing a Versatile Foundation Liquid

Most of the foundation liquids in the market need makeup removers for cleaning, while the excessive use of makeup removers might lead to skin barrier damage, which would further lead to many kinds of dermatosis, such as skin sensitivity, facial telangiectasia, rosacea, acne, as well as various cosmetic contact dermatitis. Inspired by the protective effect of fiber-rich diet on the intestinal mucosal mechanical barrier, a novel hemp/cellulose nanocrystals (CNCs)-based foundation liquid featuring easy-wiping property has been constructed, which will effectively solve the post-makeup skin cleaning problems. In this experiment, the formula of the foundation liquid can be obtained through hemp/CNCs instead of mineral oil and titanium oxide, which are considered to have undesirable local tolerance, sensitizing potential, and are environmental pollutants, to create a moisture barrier. Industrial hemp is a hot issue in cosmetic research, and a great quantity of discarded industrial hemp stalk is available to be used to produce hemp/CNCs through grinding and acidification. The graft technique is adapted to obtain hemp/CNCs-g-polylactic acid (PLA). By replacing the hydroxyl group on the side of hemp/CNCs, hemp/CNCs-g-PLA reduces the intermolecular hydrogen bonding, resulting in a higher dispersion in the oil phase. The hemp/CNCs-g-PLA has excellent performance in terms of biological compatibility, water resistance, and non-penetration into the skin. With basic features of a foundation liquid to alleviate discoloration, age spots, and skin roughness, the foundation liquid based on hemp/CNCs-g-PLA provides a novel characteristic of easy-wiping, which helps to avoid the damage to the skin barrier caused by excessive cleansing.

Biological Evaluation of Oil-in-Water Microemulsions as Carriers of Benzothiophene Analogues for Dermal Applications

During the last decade, many studies have been reported on the design and formulation of novel drug delivery systems proposed for dermal or transdermal administration. The efforts focus on the development of biocompatible nanodispersions that can be delivered to the skin and treat severe skin disorders, including cancer. In this context, oil-in-water (O/W) microemulsions have been developed to encapsulate and deliver lipophilic bioactive molecules for dermal application. An O/W biocompatible microemulsion composed of PBS buffer, Tween 80, and triacetin was assessed for its efficacy as a drug carrier of DPS-2, a lead compound, initially designed in-house to inhibit BRAF^V600E oncogenic kinase. The system was evaluated through both in vitro and ex vivo approaches. The cytotoxic effect, in the presence and absence of DPS-2, was examined through the thiazolyl blue tetrazolium bromide (MTT) cell proliferation assay using various cell lines. Further investigation through Western blotting revealed that cells died of necrosis. Porcine ear skin was used as a skin model to evaluate the degree of permeation of DPS-2 through skin and assess its retention. Through the ex vivo experiments, it was clarified that encapsulated DPS-2 was distributed within the full thickness of the stratum corneum (SC) and had a high affinity to hair follicles.

Microemulsion systems to enhance the transdermal permeation of ivermectin in dogs: A preliminary in vitro study

This study aims to evaluate the influence of the phase behavior of microemulsions in the transdermal administration ("spot-on") of ivermectin, an antiparasitic drug widely used in the treatment of endoparasites and ectoparasites in dogs. In this regard, pseudoternary phase diagrams composed of water (aqueous phase), isopropyl myristate (oil phase), tween 80 (surfactant) and labrasol (cosurfactant) were obtained in a different surfactant: cosurfactant (S:CS) ratios. S:CS in 1:3 ratio presented a larger region of microemulsion formation and three microemulsions were selected from it and characterized. Subsequently, in vitro permeation and retention studies were conducted using canine skin as membrane. SAXS, rheology and conductivity data were employed to confirm the phase behavior of the microemulsions (w/o, bicontinuous or o/w). The cutaneous permeation and retention tests showed that the w/o microemulsion, followed by bicontinuous microemulsion, resulted in a higher amount of drug permeated through canine skin, suggesting better transdermal permeation. On the other hand, o/w microemulsion resulted in a higher amount of drug accumulated into the skin, suggesting better topical activity. Thus, it can be concluded that phase behavior of microemulsions influenced the drug permeation in the canine skin differently from other animal models. Microemulsions, especially w/o and bicontinuous, can be promising vehicles regarding the transdermal delivery of ivermectin.

Salvianolic Acid B in Microemulsion Formulation Provided Sufficient Hydration for Dry Skin and Ameliorated the Severity of Imiquimod-Induced Psoriasis-Like Dermatitis in Mice

Psoriasis is a chronic inflammatory skin disorder with a pathogenesis involving the interleukin-23/interleukin-17 axis. Salvianolic acid B exerts several pharmacological effects, such as antioxidation, anti-inflammation, and antitumor effects. The anti-psoriatic effects of salvianolic acid B have not been reported. In this study, we aimed to determine the optimum vehicle for salvianolic acid B, investigate its therapeutic effect on psoriatic-like skin conditions, and explore its underlying mechanisms of action. BALB/c mice were administered topical imiquimod to induce psoriasis-like skin and were then randomly assigned to control, vehicle control, salvianolic acid B in vehicles, and 0.25% desoximetasone ointment treatment groups. Barrier function, cytokine expression, histology assessment, and disease severity were evaluated. The results showed that salvianolic acid B-containing microemulsion alleviated disease severity, reduced acanthosis, and inhibited interleukin-23/interleukin-17 (IL-23/IL-17) cytokines, epidermal proliferation, and increased skin hydration. Our study suggests that salvianolic acid B represents a possible new therapeutic drug for the treatment of psoriasis. In addition, such formulation could obtain high therapeutic efficacy in addition to providing sufficient hydration for dry skin.

Development of galangal essential oil-based microemulsion gel for transdermal delivery of flurbiprofen: simultaneous permeability evaluation of flurbiprofen and 1,8-cineole

Flurbiprofen (FP) is one of the most potent nonsteroidal anti-inflammatory drugs with very low bioavailability of approximately 12% following transdermal administration, compared to that after oral administration. This study aimed to deliver FP as a microemulsion (ME) gel by transdermal administration. Galangal essential oil (GEO) was extracted from Rhizoma Alpiniae Officinarum and identified by GC-MS. The most abundant constituent was determined to be 1,8-cineole (52.06%). Compared to azone, GEO was proved to exert significantly higher (p < .01) penetration enhancement effect and significantly (p < .001) lower skin cell toxicity. The formulation (FP-GEO-ME gel) was prepared using GEO as an oil phase and a penetration enhancer. Compared to that of FP solution, the enhancement ratio (ER) of FP-GEO-ME gel was 4.06. In addition, more than 25% 1,8-cineole permeated through the rat skin. In vivo pharmacokinetic studies revealed that the AUC_0-t of FP after transdermal administration of FP-GEO-ME gel was higher by approximately 4.56-fold than that of marketed FP cataplasms. The relative bioavailability of FP and 1,8-cineole after transdermal administration compared to oral administration of FP-GEO-ME were determined to be 96.58% and 85.49%, respectively. FP-GEO-ME gel significantly inhibited carrageenan-induced hind-paw edema and decreased PGE2 levels in rat serum. GEO-ME gel also exhibited significant anti-inflammatory effects at 2 h after the therapy (p < .05). The synergistic effects of FP and GEO were expected for the application of FP-GEO-ME gel. In conclusion, GEO-ME gel may be a promising formulation for transdermal administration of anti-inflammatory hydrophobic drugs, such as FP.

In situ microemulsion-gel obtained from bioadhesive hydroxypropyl methylcellulose films for transdermal administration of zidovudine

This study aims to develop in situ microemulsion-gel (ME-Gel) obtained from hydroxypropyl methylcellulose (HPMC) films for transdermal administration of Zidovudine (AZT). Firstly, HPMC films containing propylene glycol (PG) and eucalyptus oil (EO) were obtained and characterized. Later, a pseudo-ternary phase diagram composed of water, EO, tween 80 and PG was obtained and one microemulsion (ME) with a similar proportion of the film components was obtained. ME was transformed in ME-Gel by the incorporation of HPMC. Finally, HPMC films were hydrated with Tween 80 solution to yield in situ ME-Gel and its effect on AZT skin permeation was compared with HPMC film hydrated with water (F5_hyd). The results showed that the ME and ME-Gel presented a droplet size of 16.79 and 122.13 μm, respectively, polydispersity index (PDI) < 0.39 and pH between 5.10 and 5.40. The incorporation of HPMC resulted in viscosity about 2 times higher than the use of ME. The presence of AZT did not alter the formulation properties. The in situ ME-Gel promoted a two-fold increase in the permeated amount of AZT compared to F5_hyd. The results suggest that it was possible to obtain an ME-Gel in situ from HPMC films and that its effect on transdermal permeation of AZT was significant.

Transcutol® P/Cremophor® EL/Ethyl Oleate-Formulated Microemulsion Loaded into Hyaluronic Acid-Based Hydrogel for Improved Transdermal Delivery and Biosafety of Ibuprofen

In the present study, a novel transdermal delivery system was developed and its advantages were demonstrated. Ibuprofen is a commonly used anti-inflammatory, antipyretic, and analgesic drug; however, because of its short biological half-life, it must be frequently administered orally and is highly irritating to the digestive tract. To prepare a novel transdermal delivery system for ibuprofen, a microemulsion was used as a drug carrier and dispersed in a hyaluronic acid-based hydrogel (ME/Gel) to increase percutaneous drug absorption while avoiding gastrointestinal tract irritation. The prepared microemulsion had a droplet size of ~ 90 nm, and the microemulsion had good stability in the hydrogel. Rheological tests revealed that the ME/Gel is a pseudoplastic fluid with decreased viscosity and increased shear rate. It displayed a certain viscoelasticity, and the microemulsion distribution displayed minor effects on the rheological characteristics of the hydrogel system. There was no significant difference in the rheology of the ME/Gel at 25°C and 32°C (normal skin surface temperature), which is beneficial for clinical application. Drug transdermal flux was significantly higher than that of the hydrogel and commercial cream groups (p < 0.01). The 24-h cumulative drug permeation amount was 1.42-fold and 2.52-fold higher than that of the hydrogel and cream groups, respectively. By loading into the ME/Gel, the cytotoxicity of the drug to HaCaT cells was reduced. These results indicate that the prepared ME/Gel can effectively improve transdermal ibuprofen delivery and the biosafety of the drug and could therefore have applicability as a drug delivery system.

Investigation of a Microemulsion Containing Clotrimazole and Itraconazole for Transdermal Delivery for the Treatment of Sporotrichosis

The aim of this study was to develop a microemulsion (ME) formulation containing an association of itraconazole (ITC) and clotrimazole (CLT) as a transdermal delivery system for the treatment of sporotrichosis. Pseudoternary phase diagrams were constructed to optimize the ME formulation. The ME formulation selected contained 1% (w/w) ITC and 1% (w/w) CLT and was composed of 23.07% Tween® 60 (surfactant), 23.07% propylene glycol (cosurfactant/cosolvent), 30.77% benzyl alcohol (oil), and 21.09% water. The ITC/CLT-loaded ME (ITC/CLT-ME) had a droplet size value of 217 ± 0.9 nm, with a polydispersity index of 0.5 ± 0.1. Permeation experiments on pig ear skin were conducted for ITC/CLT-ME, and the results indicated that the drug permeation performance was influenced by CLT, indicating that CLT acts as a promoter enhancer. In the in vitro antifungal activity assay using Sporothrix brasiliensis yeast, the inhibition halo produced by ITC/CLT-ME exhibited a mean diameter of 43.67 ± 2.31 mm. The ITC/CLT-ME formulation did not cause skin irritation in mice. The results suggest that ITC/CLT-ME is a promising tool for the transdermal treatment of sporotrichosis.

Integrating tacrolimus into eutectic oil-based microemulsion for atopic dermatitis: simultaneously enhancing percutaneous delivery and treatment efficacy with relieving side effects

Background: Topical application of tacrolimus (FK506) was effective in treating atopic dermatitis (AD); however, the therapeutic efficiency is hampered by its poor penetration into the skin and local side effects of transient irritation symptoms with a burning sensation, a feeling of warmth or heat. Menthol and camphor have been widely used in topical compound formulations for adjunctive pharmacotherapy for antipruritics and analgesics owing to their cool nature, and both present skin penetration enhancing effects. Moreover, they can form a liquid eutectic oil to solubilize hydrophobic drugs.

Purpose: Taking advantages of menthol/camphor eutectic (MCE), this work aims to integrate FK506 into MCE to construct a microemulsion system, i.e., FK506 MCE ME, which simultaneously enhances the percutaneous delivery and treatment efficacy, while reduces the side effects of FK506.

Methods: The formulation of FK506 MCE ME was optimized and characterized. Different formulations containing FK506 were topically administered to treat 1–chloro–2, 4–dinitrobenzene (DNCB)-induced murine AD.

Results: MCE solubilized FK506. FK506 in MCE ME penetrated skin in vitro more than in the commercial ointment, and MCE predominantly exerted the enhancing effects in MCE ME. FK506 MCE ME or FK506 MCE ME gel had greater effects on clinical symptoms, histological analysis, and IgE than did commercial FK506. The anti-pruritic and down-regulation of substance P effects of MCE ME vehicle mitigated the side effects of FK506 application.

Conclusion: MCE ME presented the excellent properties of simultaneously enhancing the percutaneous delivery and treatment efficacy, while reducing the side effects of FK506 for AD. Therefore, MCE ME is a promising nanoscale system for FK506 to effectively treating AD with low irritation and high medication adherence.

Chemical compounds studied in this article: Tacrolimus (PubChem CID: 445643); menthol (PubChem CID: 1254); camphor (PubChem CID: 2537)

Controlled Release Film Forming Systems in Drug Delivery: The Potential for Efficient Drug Delivery

Despite many available approaches for transdermal drug delivery, patient compliance and drug targeting at the desired concentration are still concerns for effective therapies. Precise and efficient film-forming systems provide great potential for controlling drug delivery through the skin with the combined advantages of films and hydrogels. The associated disadvantages of both systems (films and hydrogels) will be overcome in film-forming systems. Different strategies have been designed to control drug release through the skin, including changes to film-forming polymers, plasticizers, additives or even model drugs in formulations. In the current review, we aim to discuss the recent advances in film-forming systems to provide the principles and review the methods of these systems as applied to controlled drug release. Advances in the design of film-forming systems open a new generation of these systems.

Tailoring microstructural, drug release properties, and antichagasic efficacy of biocompatible oil-in-water benznidazol-loaded nanoemulsions

This study explored the transition of lamellar-type liquid crystal (LLC) to biocompatible oil-in-water nanoemulsions able to modify benznidazole (BNZ) release and target the drug to cells infected with the T. cruzi parasite. Three cosolvents (2methylpyrrolidone [NMP], polyethylene glycol [POL], and propylene glycol [PRO] were tested to induce the transition of anisotropic LLC systems to isotropic nanoemulsions. Mixtures of soy phosphatidylcholine with sodium oleate stabilized the dispersions of medium chain triglyceride in water. Rheological measurements, polarized microscopy, and small angle X-ray scattering demonstrated that there is a phase transition from LLC to desired nanoemulsions. These small and narrow droplet-sized nanocarriers exhibited some advantages and promising features, such as the enhanced BNZ aqueous solubility and slow drug release rate. In vitro cell biocompatibility of formulations was assessed in the Vero E6 and SiHa cell lines. Drug-loaded nanoemulsions inhibited the epimastigote growth of the T. cruzi parasite (IC50 0.208 ± 0.052 μg mL^-1) and reduced its infective life form trypomastigote (IC50 0.392 ± 0.107 μg mL^-1). The oil-in-water nanoemulsions were demonstrated as promising biocompatible liquid drug delivery systems capable of improving the BNZ trypanocidal activity for the treatment of Chagas disease.

Biopharmaceutical profile of a clotrimazole nanoemulsion: Evaluation on skin and mucosae as anticandidal agent

Clotrimazole (CLT) was formulated in a nanoemulsion (NE) for the topical treatment of candidiasis consisting of 10% labrafac^® lipophile, 60% labrasol^®:capryol^® 90 mixture (ratio 4:1) and 30% propylene glycol. Physicochemical properties, stability, rheology, in vitro drug release, ex vivo drug permeation through human skin and porcine buccal, sublingual and vaginal mucosae, antifungal efficacy, as well as in vivo skin tolerance were evaluated. 1% CLT-NE (CLT-NE1) and 2% CLT-NE (CLT-NE2) exhibited 153 ± 17.25 and 186 ± 15.38 nm droplet sizes, low polydispersity indexes, negative zeta potentials and biocompatible pH values. The CLT-NEs exhibited typical Newtonian profiles with viscosities of 42.14 ± 0.037 mPa·s and 41.35 ± 0.041 mPa·s, respectively and higher extensibility properties than commercial counterparts retaining their physicochemical properties for 180 days. NEs provided a sustained release of drug according to the first order model. Similar skin permeation properties were observed between CLT-NE1 and commercial reference. However, significant higher CLT amounts retained in mucosae were provided by CLT-NE2 when compared with references. Antifungal efficacies were also higher than commercial references, and the in vivo tolerance study confirmed the suitability for topical application, making CLT-NEs a great tool for clinical investigation of topical candidiasis treatments.

Technological development of microemulsions with perspectives for pain treatment: a patent review

INTRODUCTION

Microemulsions are thermodynamically stable translucent systems widely used for systemic delivery of drugs. The present study is the first to analyze the biotechnological potential of microemulsion systems for therapeutic purposes, through transdermal route, for pain treatment.

AREAS COVERED

Patents were searched in the World Intellectual Property Organization (WIPO), European Patent Office (Espacenet), United States Patent and Trademark Office (USPTO) and National Institute of Intellectual Property (INPI). The inclusion criteria were published patents containing the keywords; 'microemulsion' and 'transdermal' in their title or abstract. 208 patents were found. However, only those patents which mentioned in their abstract or in their description the use of microemulsion system (object of invention) for pain treatment were selected. Were excluded duplicate patents and those that did not report pharmacological use of MEs specifically for pain treatment. Thus, sixteen patents were selected and described in the present study.

EXPERT OPINION

Patents were found that focused specifically on the development process of microemulsion systems, the inclusion of essential oils in microemulsions, which place microemulsions as delivery systems for NSAIDs and other substances, as well as microemulsions for transdermal administration. These studies reinforce the therapeutic applicability of MEs in the treatment of acute and chronic pain.

Development of microemulsions of suitable viscosity for cyclosporine skin delivery

Psoriasis is a widespread chronic disease affecting 2-4% of the population in Western countries. Its mild-to-moderate form, representing approximately 80% of the total cases, is treated by topical application, with corticosteroid being the standard treatment. However, in case of psoriasis, no single treatment works for every patient and optimizing topical therapy is a key aspect. A possible alternative is represented by cyclosporine, an immunosuppressant cyclic peptide administered orally in the treatment of the severe form. Its topical application could avoid the problems related to systemic immunosuppression, but the unfavourable physico-chemical properties (MW: 1202 Da; LogP ≈ 3) hinder its permeation across the stratum corneum. The aim of the paper was the preparation, characterization and ex-vivo evaluation of cyclosporine loaded microemulsions using oleic acid as oil phase, either Tween^®80 or a soluble derivative of vitamin E (TPGS) as surfactants and either Transcutol^®, propylene glycol or 1,3 propanediol as co-surfactants. The issue of formulation viscosity was also addressed 1) by evaluating the thickening of Tween^®80-based microemulsions by direct addition of different rheological modifiers, 2) by building pseudo-ternary phase diagrams using TPGS, to identify the water/oil/surfactants proportions resulting in viscous self-gelifying systems. Nine formulations (five Tween^®80-based and four TPGS-based) were selected, characterized in terms of droplets size (low viscosity systems) or rheological properties (high viscosity systems), loaded with 6 mg/g cyclosporine and applied ex-vivo on porcine skin for 22 h. A relevant skin accumulation was obtained either with a low-viscosity Tween^®80-based microemulsion (9.78 ± 3.86 µg/cm²), or with a high viscosity TPGS-based microemulsion (18.3 ± 5.69 µg/cm²), with an increase of about 3 and 6 times respectively for comparison with a control cyclosporine solution in propylene glycol. The role of water content, surfactant, co-surfactant and viscosity was also addressed and discussed. The kinetic of skin uptake from the best performing formulation was finally evaluated, highlighting a relatively quick skin uptake and the achievement, after 2 h of contact, of potentially therapeutic cyclosporine skin concentrations.