In vitro drug release and in vivo safety of vitamin E and cysteamine loaded contact lenses

Drug-eluting contact lenses: Progress, challenges, and prospects

Topical ophthalmic solutions (eye drops) are becoming increasingly popular in treating and preventing ocular diseases for their safety, noninvasiveness, and ease of handling. However, the static and dynamic barriers of eyes cause the extremely low bioavailability (<5%) of eye drops, making ocular therapy challenging. Thus, drug-eluting corneal contact lenses (DECLs) have been intensively investigated as a drug delivery device for their attractive properties, such as sustained drug release and improved bioavailability. In order to promote the clinical application of DECLs, multiple aspects, i.e., drug release and penetration, safety, and biocompatibility, of these drug delivery systems were thoroughly examined. In this review, we systematically discussed advances in DECLs, including types of preparation materials, drug-loading strategies, drug release mechanisms, strategies for penetrating ocular barriers, in vitro and in vivo drug delivery and penetration detection, safety, and biocompatibility validation methods, as well as challenges and future perspectives.

Review of Potential Drug-Eluting Contact Lens Technologies

The field of ophthalmology is expanding exponentially, both in terms of diagnostic and therapeutic capabilities, as well as the worldwide increasing incidence of eye-related diseases. Due to an ageing population and climate change, the number of ophthalmic patients will continue to increase, overwhelming healthcare systems and likely leading to under-treatment of chronic eye diseases. Since drops are the mainstay of therapy, clinicians have long emphasised the unmet need for ocular drug delivery. Alternative methods, i.e., with better compliance, stability and longevity of drug delivery, would be preferred. Several approaches and materials are being studied and used to overcome these drawbacks. We believe that drug-loaded contact lenses are among the most promising and are a real step toward dropless ocular therapy, potentially leading to a transformation in clinical ophthalmic practice. In this review, we outline the current role of contact lenses in ocular drug delivery, focusing on materials, drug binding and preparation, concluding with a look at future developments.

Advances in Nanogels for Topical Drug Delivery in Ocular Diseases

Nanotechnology has accelerated the development of the pharmaceutical and medical technology fields, and nanogels for ocular applications have proven to be a promising therapeutic strategy. Traditional ocular preparations are restricted by the anatomical and physiological barriers of the eye, resulting in a short retention time and low drug bioavailability, which is a significant challenge for physicians, patients, and pharmacists. Nanogels, however, have the ability to encapsulate drugs within three-dimensional crosslinked polymeric networks and, through specific structural designs and distinct methods of preparation, achieve the controlled and sustained delivery of loaded drugs, increasing patient compliance and therapeutic efficiency. In addition, nanogels have higher drug-loading capacity and biocompatibility than other nanocarriers. In this review, the main focus is on the applications of nanogels for ocular diseases, whose preparations and stimuli-responsive behaviors are briefly described. The current comprehension of topical drug delivery will be improved by focusing on the advances of nanogels in typical ocular diseases, including glaucoma, cataracts, dry eye syndrome, and bacterial keratitis, as well as related drug-loaded contact lenses and natural active substances.

Biopolymeric Coatings for Local Release of Therapeutics from Biomedical Implants

The deployment of structures that enable localized release of bioactive molecules can result in more efficacious treatment of disease and better integration of implantable bionic devices. The strategic design of a biopolymeric coating can be used to engineer the optimal release profile depending on the task at hand. As illustrative examples, here advances in delivery of drugs from bone, brain, ocular, and cardiovascular implants are reviewed. These areas are focused to highlight that both hard and soft tissue implants can benefit from controlled localized delivery. The composition of biopolymers used to achieve appropriate delivery to the selected tissue types, and their corresponding outcomes are brought to the fore. To conclude, key factors in designing drug-loaded biopolymeric coatings for biomedical implants are highlighted.

Therapeutic contact lenses for the treatment of corneal and ocular surface diseases: advances in extended and targeted drug delivery

The eye is one of the most important organs in the human body providing critical information on the environment. Many corneal diseases can lead to vision loss affecting the lives of people around the world. Ophthalmic drug delivery has always been a major challenge in the medical sciences. Since traditional methods are less efficient (∼ 5%) at delivering drugs to ocular tissues, contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. The main techniques used to achieve sustained release are discussed in this review, including soaking in drug solutions, incorporating drug into multilayered contact lenses, use of vitamin E barriers, molecular imprinting, nanoparticles, micelles and liposomes. The most clinically relevant results on different eye pathologies are presented. In addition, this review summarizes the benefits of contact lenses over eye drops, strategies for incorporating drugs into lenses to achieve sustained release, results of in vitro and in vivo studies, and the recent advances in the commercialization of therapeutic contact lenses for allergic conjunctivitis.

Innovation in the Development of Synthetic and Natural Ocular Drug Delivery Systems for Eye Diseases Treatment: Focusing on Drug-Loaded Ocular Inserts, Contacts, and Intraocular Lenses

Nowadays, ocular drug delivery still remains a challenge, since the conventional dosage forms used for anterior and posterior ocular disease treatments, such as topical, systemic, and intraocular administration methods, present important limitations mainly related to the anatomical complexity of the eye. In particular, the blood-ocular barrier along with the corneal barrier, ocular surface, and lacrimal fluid secretion reduce the availability of the administered active compounds and their efficacy. These limitations have increased the need to develop safe and effective ocular delivery systems able to sustain the drug release in the interested ocular segment over time. In the last few years, thanks to the innovations in the materials and technologies employed, different ocular drug delivery systems have been developed. Therefore, this review aims to summarize the synthetic and natural drug-loaded ocular inserts, contacts, and intraocular lenses that have been recently developed, emphasizing the characteristics that make them promising for future ocular clinical applications.

Thermo-responsive and mucoadhesive gels for the treatment of cystinosis

Mucoadhesive thermogels were developed by crosslinking poly(n-isopropylacrylamide) based polymers with chitosan and incorporating disulfide bridges, capable of releasing cysteamine upon interaction with mucin, for the treatment of cystinosis. Through crosslinking with chitosan and incorporating varying concentrations of the disulfide monomer into the polymer backbone, the extent of how mucoadhesive the developed thermogels were could be controlled. Through disulfide bridging with mucin, the thermogels released 6 to 10 μg of the conjugate model 2-mercaptopyridine over five days. Utilizing chitosan as the crosslinker, the developed thermogels were shown to degrade to a statistically higher extent following incubation with lysozyme, the highest concentration tear enzyme, by gravimetric and rheologic analysis. The developed thermogels were extensively tested in vivo utilizing a rat model in which materials were applied directly to the corneal surface and a rabbit model in which thermogels were applied to the inferior fornix. With the developed models, there was no adverse reactions or visual discomfort incurred following application of the thermogels. It has been demonstrated that the thermogels produced can be applied to the inferior fornix and release the stable conjugated payload over several days. The developed thermogel was designed to improve upon the current clinical treatment options for ocular cystinosis which are acidic topical formulations that require reapplication multiple times a day.

Nanoparticles for the treatment of glaucoma-associated neuroinflammation

Recently, a considerable amount of literature has emerged around the theme of neuroinflammation linked to neurodegeneration. Glaucoma is a neurodegenerative disease characterized by visual impairment. Understanding the complex neuroinflammatory processes underlying retinal ganglion cell loss has the potential to improve conventional therapeutic approaches in glaucoma. Due to the presence of multiple barriers that a systemically administered drug has to cross to reach the intraocular space, ocular drug delivery has always been a challenge. Nowadays, studies are focused on improving the current therapies for glaucoma by utilizing nanoparticles as the modes of drug transport across the ocular anatomical and physiological barriers. This review offers some important insights on the therapeutic advancements made in this direction, focusing on the use of nanoparticles loaded with anti-inflammatory and neuroprotective agents in the treatment of glaucoma. The prospect of these novel therapies is discussed in relation to the current therapies to alleviate inflammation in glaucoma, which are being reviewed as well, along with the detailed molecular and cellular mechanisms governing the onset and the progression of the disease.

One Week Sustained In Vivo Therapeutic Release and Safety of Novel Extended-Wear Silicone Hydrogel Contact Lenses

Since the seminal work of Wichterle in 1965 describing the first soft contact lenses and their potential for ocular drug delivery, the field has yet to realize his vision. Maintaining all lens commercial properties combined with a mechanism for controlled drug release of therapeutically relevant concentrations for duration of wear is a major challenge. Here, successful in vivo week-long sustained release of a small molecular weight therapeutic in rabbits from extended-wear silicone hydrogel contact lenses meeting all commercial specifications by utilizing a novel macromolecular memory strategy is reported for the first time. Lens-treated eyes show a continuous, therapeutically relevant bromfenac tear concentration of 256.4 ± 23.1 µg mL^-1 for 8 days. Bromday (bromfenac ophthalmic solution, 0.09%, Bausch+Lomb) topical drops exhibit a quick peak concentration of 269.3 ± 85.7 µg mL^-1 and 100 min duration. Bioavailability (AUC_0-8days ) and mean residence time of lenses are 26 and 155 times higher than drops, respectively. Lenses are safe, well tolerated, and no corneal histological differences are observed. This work highlights the enormous potential of drug releasing lenses as a platform strategy, and offers a new dropless clinical strategy for post-cataract, uveitis, post-LASIK, and corneal abrasion treatment.

Development of a fibrin-mediated gene delivery system for the treatment of cystinosis via design of experiment

Cystinosis is a rare disease, caused by a mutation in the gene cystinosin and characterised by the accumulation of cystine crystals. Advantages of biomaterial-mediated gene delivery include reduced safety concerns and the possibility to cure organs that are difficult to treat using systemic gene transfer methods. This study developed novel fibrin hydrogels for controlled, localised gene delivery, for the treatment of cystinosis. In the first part, fabrication parameters (i.e., DNA, thrombin, and aprotinin concentrations) were optimised, using a Design of Experiment (DOE) methodology. DOE is a statistical engineering approach to process optimisation, which increases experimental efficiency, reduces the number of experiments, takes into consideration interactions between different parameters, and allows the creation of predictive models. This study demonstrated the utility of DOE to the development of gene delivery constructs. In the second part of the study, primary fibroblasts from a patient with cystinosis were seeded on the biomaterials. Seeded cells expressed the recombinant CTNS and showed a decrease in cystine content. Furthermore, conditioned media contained functional copies of the recombinant CTNS. These were taken up by monolayer cultures of non-transfected cells. This study described a methodology to develop gene delivery constructs by using a DOE approach and ultimately provided new insights into the treatment of cystinosis.

Transport of Vitamin E from Ethanol/Water Solution into Contact Lenses and Impact on Drug Transport

Purpose: Contact lens-based drug delivery has many advantages over eye drops including higher bioavailability and sustained release. Commercial contact lenses release drug rapidly necessitating integration of control-release mechanisms into the lenses such as incorporation of vitamin E diffusion barriers. In prior publications, vitamin E barriers are loaded by placing the lenses in vitamin E-ethanol solution, followed by the ethanol extraction. In this article, we investigate feasibility of manufacturing vitamin E barriers by soaking contact lenses in vitamin E dissolved in ethanol-water solutions to minimize swelling. Methods: Contact lenses are soaked in solutions of vitamin E dissolved in ethanol-water mixtures. The dynamics of vitamin E transport into the measured and fitted to diffusion equation to determine diffusivity and partition coefficient. Vitamin E loaded lenses are imaged and transport of hydrophilic drug timolol is measured. Results: The partition coefficient of vitamin E increases more than 5 and 10-fold when the water content in the loading solution reaches 15% and 25% (v/v), respectively. The solubility of vitamin E in the solutions decreases as water fraction increases but the increase in partition coefficient allows for loading > 20% vitamin E in the lens. The barriers manufactured by this approach are effective at sustaining release of glaucoma drug timolol. Conclusions: Vitamin E barriers can be incorporated into contact lenses by soaking in solutions of vitamin E in water and ethanol. Vitamin E barriers extended hydrophilic drug release and the reduced swelling is beneficial in minimizing the possibility of lens damage during loading of vitamin E.

Ofloxacin-Loaded Niosome-Laden Contact Lens: Improved Properties of Biomaterial for Ocular Drug Delivery

Currently, bacterial conjunctivitis is managed by multiple antibiotic eye-drop solution, which is highly inefficient due to low ocular bioavailability and frequent dosing. Therapeutic soft contact lenses can be used to sustain the release of ocular drugs. However, the conventional soaking method (economic and widely used) showed low drug uptake and high burst release, and the optophysical properties of the contact lens were altered for clinical application. In this paper, novel ofloxacin-loaded niosomes were developed to increase the drug loading capacity of contact lenses while also sustaining ocular drug delivery. Ofloxacin-loaded niosomes were prepared by the thin film hydration technique with three levels of cholesterol. The niosome-laden contact lenses (OFL-Nio-L) led to improved optophysical properties (swelling, transmittance, oxygen permeability) and lysozyme adherence compared to the conventional soaked contact lens (CV-OFL-L). The in vitro drug release data of CV-OFL-L showed high burst release, while OFL-Nio-L lenses showed sustained release up to 48-96 h. In a rabbit tear fluid model, the OFL-Nio-100-L lens showed a high drug concentration at all-time points compared to the CV-OFL-L and eye-drop solution. The efficacy study in the rabbit model showed improved healing effect with OFL-Nio-100-L lens compared to frequent eye-drop therapy. In conclusion, the paper demonstrated the successful application of niosomes to deliver ofloxacin using contact lens without affecting the critical lens properties to substitute eye-drop therapy.

In vivo drug delivery via contact lenses: The current state of the field from origins to present

Over the past half century, contact lenses have been investigated for their potential as drug delivery devices for ocular therapeutics. Hundreds of studies have been published in the pursuit of the most effective and efficient release strategies and methods for contact lens drug delivery. This paper provides a thorough overview of the various contact lens drug delivery strategies, with a specific, comprehensive focus on in vivo studies that have been published since the field began in 1965. Significant accomplishments, current trends, as well as future strategies and directions are highlighted. In vivo study analysis provides a straightforward perspective and assessment of method success and commercialization potential in comparison to benchtop, in vitro studies. Analysis of the majority of published work indicates in vitro and in vivo studies do not correlate with a correlation coefficient of 0.25, with many in vitro studies grossly overestimating drug release duration and not showing appreciable drug release control. However, there has been an increase in activity in the last decade, and some methods have generated promising results exhibiting controlled release with commercialization potential. Clinical translation of drug releasing lenses is on the horizon and has high potential to impact a large number of patients providing efficacious treatment compared to current topical treatments.

Gold nanoparticle synthesis in contact lenses for drug-less ocular cystinosis treatment

PURPOSE

To develop gold nanoparticles-loaded contact lens ("GoldinLens") to bind a significant mass of cystine on the surface of the gold nanoparticles (GNPs) for cystinosis treatment due to the reaction between cystine and gold.

METHODS

The GoldinLens was manufactured by synthesizing GNPs inside the preformed contact lens matrix by first loading the lenses (Moist and TrueEye) with gold precursor followed by reduction (with sodium borohydride or trisodium citrate) to gold atoms, which nucleated to GNPs inside the polymeric matrix. The lenses were characterized by SEM, XRD, UV-Vis spectroscopy and mass of GNPs loaded in the lens was determined by direct measurement of mass. Manufactured lenses were soaked in cystine solution for cystine uptake in vitro.

RESULTS

Results show that gold loading in the contact lens increases linearly with gold precursor concentration and number of repetitions of the manufacturing process. The stronger reducing agent sodium borohydride resulted in higher gold loading, with the loading being higher in the Moist lenses due to higher diffusivity of the reducing agent into the lens. However, GNPs were smaller in size and relatively monodispersed in TruEye GoldinLens, resulting in higher cystine uptake of 47 μg/lens over 24 h (vs. 33 μg/lens for Moist GoldinLens). However, the rate of this uptake was higher for Moist GoldiLens (8.25 vs. 2.35 μg/h), with the maximum uptake occurring in one hour (vs. five hours).

CONCLUSION

A method for manufacturing GoldinLens, wherein small gold nanoparticles are trapped in contact lenses, has been developed for drugless cystinosis treatment. The lenses withdraw cystine molecules from the surrounding milieu, with the TrueEye GoldinLens being superior for the extent of, while Moist GoldinLens is superior for rate of cystine removal. GoldinLenses of this study can be used for drugless cystine removal cystinosis treatment with one- or five-hour wear at a time.

Atorvastatin-Eluting Contact Lenses: Effects of Molecular Imprinting and Sterilization on Drug Loading and Release

Statins are receiving increasing attention in the ophthalmic field. Their activity as 3-hydroxy-3-methylglutaryl–CoA (HMG–CoA) reductase inhibitors is clinically used to regulate cholesterol levels and leads to pleiotropic effects, which may help in the management of diabetes-related ocular pathologies. This work aims to design bioinspired contact lenses (CLs) with an affinity for atorvastatin by mimicking the active site of HMG–CoA reductase. Sets of imprinted and nonimprinted 2-hydroxyethyl methacrylate (HEMA) hydrogels were synthesized, varying the contents in functional monomers that bear chemical groups that resemble those present in HMG–CoA reductase, namely, ethylene glycol phenyl ether methacrylate (EGPEM), 2-aminoethyl methacrylate hydrochloride (AEMA), and N-(3-aminopropyl) methacrylamide hydrochloride (APMA). The hydrogels were characterized in terms of suitability as CLs (solvent uptake, light transmission, mechanical properties, and biocompatibility) and capability to load and release atorvastatin. Three sterilization protocols (steam heat, gamma radiation, and high hydrostatic pressure) were implemented and their effects on hydrogel properties were evaluated. Copolymerization of AEMA and, particularly, APMA endowed the hydrogels with a high affinity for atorvastatin (up to 11 mg/g; K_N/W > 200). Only high hydrostatic pressure sterilization preserved atorvastatin stability and hydrogel performance. Permeability studies through the porcine cornea and sclera tissues revealed that the amount of atorvastatin accumulated in the cornea and sclera could be effective to treat ocular surface diseases.

Controllable release of pirfenidone by polyvinyl alcohol film embedded soft contact lenses in vitro and in vivo

To increase the amount of pirfenidone (PFD) loaded in polyvinyl alcohol (PVA) film embedded soft contact lens (SCL), and evaluate its function of sustaining delivery of drug in vitro and in vivo. Drug loading efficiency within PVA film and SCLs, drug release from SCLs in vitro, and the effects of parameters of SCLs and external environment on drug release in vitro were evaluated by ultraviolet–visible spectrophotometer at 312 nm. Safety of SCLs was evaluated in vitro by transformed human corneal epithelial cell. Safety in vivo was determined by optical coherence tomography and histology of anterior segment of rabbits. Drug release study in tear fluid and aqueous humor were measured by ultra-performance liquid chromatography. SCLs had smooth surface and were fit for experimental rabbits. Amount of PFD in PVA film and SCLs were 153.515 μg ± 12.508 and 127.438 μg ± 19.674, respectively, PFD in PVA film was significantly higher than SCLs (p=.006) and closed to 150 μg (targeting amount of PFD to be loaded). Thickness of SCLs, molecular weight of PVA, and amount of PVA used in SCLs affected drug release in vitro significantly. Thickness of PVA film and amount of drug in SCLs had no effect on drug release rate in vitro. SCLs were safe in vitro and in vivo, PFD released from SCLs could be detected around 12 hours in tears and aqueous humor, and the concentration of drug was higher than eye drop at all detected time points while amount of PFD in SCLs was lower than eye drop. Drug loaded PVA film embedded SCLs may be a promising ocular drug delivery system.

CLEAR - Contact lens technologies of the future

Contact lenses in the future will likely have functions other than correction of refractive error. Lenses designed to control the development of myopia are already commercially available. Contact lenses as drug delivery devices and powered through advancements in nanotechnology will open up further opportunities for unique uses of contact lenses. This review examines the use, or potential use, of contact lenses aside from their role to correct refractive error. Contact lenses can be used to detect systemic and ocular surface diseases, treat and manage various ocular conditions and as devices that can correct presbyopia, control the development of myopia or be used for augmented vision. There is also discussion of new developments in contact lens packaging and storage cases. The use of contact lenses as devices to detect systemic disease has mostly focussed on detecting changes to glucose levels in tears for monitoring diabetic control. Glucose can be detected using changes in colour, fluorescence or generation of electric signals by embedded sensors such as boronic acid, concanavalin A or glucose oxidase. Contact lenses that have gained regulatory approval can measure changes in intraocular pressure to monitor glaucoma by measuring small changes in corneal shape. Challenges include integrating sensors into contact lenses and detecting the signals generated. Various techniques are used to optimise uptake and release of the drugs to the ocular surface to treat diseases such as dry eye, glaucoma, infection and allergy. Contact lenses that either mechanically or electronically change their shape are being investigated for the management of presbyopia. Contact lenses that slow the development of myopia are based upon incorporating concentric rings of plus power, peripheral optical zone(s) with add power or non-monotonic variations in power. Various forms of these lenses have shown a reduction in myopia in clinical trials and are available in various markets.

Recent Research in Ocular Cystinosis: Drug Delivery Systems, Cysteamine Detection Methods and Future Perspectives

Cystinosis is a rare genetic disorder characterized by the accumulation of cystine crystals in different tissues and organs. Although renal damage prevails during initial stages, the deposition of cystine crystals in the cornea causes severe ocular manifestations. At present, cysteamine is the only topical effective treatment for ocular cystinosis. The lack of investment by the pharmaceutical industry, together with the limited stability of cysteamine, make it available only as two marketed presentations (Cystaran® and Cystadrops®) and as compounding formulations prepared in pharmacy departments. Even so, new drug delivery systems (DDSs) need to be developed, allowing more comfortable dosage schedules that favor patient adherence. In the last decades, different research groups have focused on the development of hydrogels, nanowafers and contact lenses, allowing a sustained cysteamine release. In parallel, different determination methods and strategies to increase the stability of the formulations have also been developed. This comprehensive review aims to compile all the challenges and advances related to new cysteamine DDSs, analytical determination methods, and possible future therapeutic alternatives for treating cystinosis.

Hyaluronic acid and graphene oxide loaded silicon contact lens for corneal epithelial healing

Hyaluronic acid (HA) eye drop solution is widely used to treat and manage various corneal diseases like keratoconus (after corneal cross-linking) and dry eye syndrome. However, ocular dosage forms like eye drop solution affect the routine life style of patients due to frequent dosing schedule. In this study, HA and reduced graphene oxide (rGO) was directly loaded in the silicon contact lenses (HA-GO-DL) and compared with the conventional soaking method (HA-GO-SM). The contact lenses at lower level of rGO showed permissible swelling and transmittance properties. The water retention property of HA-GO-DL contact lenses was confirmed by water evaporation studies. The flux data of HA-GO-SM contact lenses showed high burst release with 24 h release duration. While, HA-GO-DL lenses confirmed low burst with sustained release up to 96 h. In ocular irritation study, the HA-GO-DL-2 lenses was found to be safe. The HA-GO-DL-2 batch showed high HA-tear fluid concentration (rabbit model) and improvement in the rabbit tear fluid volume (Schirmer strip studies) in comparison to the soaking method (HA-GO-SM-2) and eye drop solution. The study successfully demonstrate the potential of HA-GO loaded contact lenses to improve tear fluid volume to manage various ocular diseases like dry eye syndrome.

Evaluation of commercial soft contact lenses for ocular drug delivery: A review

Soft contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. Commercially available soft contact lenses offer several advantages for ocular drug delivery as they are manufactured on a large scale, which guarantees the availability of a consistent and reproducible product, and their favorable safety profile is well-established through broad clinical use. Here we review the rationale for using commercially available soft contact lenses for ocular drug delivery; summarize the evolution of the materials used in contact lens fabrication; and explore various methods used to improve the drug release characteristics and its tissue penetration. While significant progress has been made, several issues still require further attention for the commercial launch of a viable drug-eluting contact lens product, including control of initial burst release, shelf-life stability, and drug loss during processing or storage.

Controlled Release of rAAV Vectors from APMA-Functionalized Contact Lenses for Corneal Gene Therapy

As an alternative to eye drops and ocular injections for gene therapy, the aim of this work was to design for the first time hydrogel contact lenses that can act as platforms for the controlled delivery of viral vectors (recombinant adeno-associated virus, rAAV) to the eye in an effective way with improved patient compliance. Hydrogels of hydroxyethyl methacrylate (HEMA) with aminopropyl methacrylamide (APMA) (H₁: 40, and H₂: 80 mM) or without (H_c: 0 mM) were synthesized, sterilized by steam heat (121 °C, 20 min), and then tested for gene therapy using rAAV vectors to deliver the genes to the cornea. The hydrogels showed adequate light transparency, oxygen permeability, and swelling for use as contact lenses. Loading of viral vectors (rAAV-lacZ, rAAV-RFP, or rAAV-hIGF-I) was carried out at 4 °C to maintain viral vector titer. Release in culture medium was monitored by fluorescence with Cy3-rAAV-lacZ and AAV Titration ELISA. Transduction efficacy was tested through reporter genes lacZ and RFP in human bone marrow derived mesenchymal stem cells (hMSCs). lacZ was detected with X-Gal staining and quantified with Beta-Glo^®, and RFP was monitored by fluorescence. The ability of rAAV-hIGF-I-loaded hydrogels to trigger cell proliferation in hMSCs was evaluated by immunohistochemistry. Finally, the ability of rAAV-lacZ-loaded hydrogels to transduce bovine cornea was confirmed through detection with X-Gal staining of β-galactosidase expressed within the tissue.

Formation of Drug-Participating Catanionic Aggregates for Extended Delivery of Non-Steroidal Anti-Inflammatory Drugs from Contact Lenses

This paper focuses on extending drug release duration from contact lenses by incorporating catanionic aggregates. The aggregates consist of a long-chain cationic surfactant, i.e., cetalkonium chloride (CKC), and an oppositely charged anti-inflammatory amphiphilic drug. We studied three non-steroidal anti-inflammatory (NSAID) drugs with different octanol–water partition coefficients; diclofenac sodium (DFNa), flurbiprofen sodium (FBNa), and naproxen sodium (NPNa). Confirmation of catanionic aggregate formation in solution was determined by steady and dynamic shear rheology measurements. We observed the increased viscosity, shear thinning, and viscoelastic behavior characteristic of wormlike micelles; the rheological data are reasonably well described using a Maxwellian fluid model with a single relaxation time. In vitro release experiments demonstrated that the extension in the drug release time is dependent on the ability of a drug to form viscoelastic catanionic aggregates. Such aggregates retard the diffusive transport of drug molecules from the contact lenses. Our study revealed that the release kinetics depends on the CKC concentration and the alkyl chain length of the cationic surfactant. We demonstrated that more hydrophobic drugs such as diclofenac sodium show a more extended release than less hydrophobic drugs such as naproxen sodium.

Bioinspired hydrogels for drug-eluting contact lenses

Efficient ocular drug delivery that can overcome the challenges of topical application has been largely pursued. Contact lenses (CLs) may act as light-transparent cornea/sclera bandages for prolonged drug release towards the post-lens tear fluid, if their composition and inner architecture are fitted to the features of the drug molecules. In this review, first the foundations and advantages of using CLs as ocular drug depots are revisited. Then, pros and cons of common strategies to prepare drug-loaded CLs are analyzed on the basis of recent examples, and finally the main section focuses on bioinspired strategies that can overcome some limitations of current designs. Most bioinspired strategies resemble a reverse engineering process to create artificial receptors for the drug inside the CL network by mimicking the human natural binding site of the drug. Related bioinspired strategies are being also tested for designing CLs that elute comfort ingredients mimicking the blinking-associated renewal of eye mucins. Other bioinspired approaches exploit the natural eye variables as stimuli to trigger drug release or take benefit of bio-glues to specifically bind active components to the CL surface. Overall, biomimicking approaches are being revealed as valuable tools to fit the amounts loaded and the release profiles to the therapeutic demands of each pathology. STATEMENT OF SIGNIFICANCE: Biomimetic and bioinspired strategies are remarkable tools for the optimization of drug delivery systems. Translation of the knowledge about how drugs interact with the natural pharmacological receptor and about components and dynamics of anterior eye segment may shed light on the design criteria for obtaining efficient drug-eluting CLs. Current strategies for endowing CLs with controlled drug release performance still require optimization regarding amount loaded, drug retained in the CL structure during storage, regulation of drug release once applied onto the eye, and maintenance of CL physical properties. All these limitations may be addressed through a variety of recently growing bioinspired approaches, which are expected to pave the way of medicated CLs towards the clinics.

Contact Lens Materials: A Materials Science Perspective

More is demanded from ophthalmic treatments using contact lenses, which are currently used by over 125 million people around the world. Improving the material of contact lenses (CLs) is a now rapidly evolving discipline. These materials are developing alongside the advances made in related biomaterials for applications such as drug delivery. Contact lens materials are typically based on polymer- or silicone-hydrogel, with additional manufacturing technologies employed to produce the final lens. These processes are simply not enough to meet the increasing demands from CLs and the ever-increasing number of contact lens (CL) users. This review provides an advanced perspective on contact lens materials, with an emphasis on materials science employed in developing new CLs. The future trends for CL materials are to graft, incapsulate, or modify the classic CL material structure to provide new or improved functionality. In this paper, we discuss some of the fundamental material properties, present an outlook from related emerging biomaterials, and provide viewpoints of precision manufacturing in CL development.

Carbon Black Tinted Contact Lenses for Reduction of Photophobia in Cystinosis Patients

PURPOSE

To examine if current development on using contact lenses for drug delivery of cysteamine to treat ocular symptoms of cystinosis can be tinted to mitigate photophobia common in patients by reducing transmittance Methods: Commercial contact lenses were placed in a carbon black solution to examine loading after lens synthesis. Silicone hydrogel contact lenses were also synthesized with carbon black added prior to UV curing. Transmittance was measured using UV-vis spectrophotometry over the range of 190-1190 nm and compared to unmodified contact lenses. Lens parameters of refractive index, ion permeability, and Young's modulus were measured using a refractometer, release of sodium chloride, and the cantilever method. Cysteamine release was measured by loading lenses into 5% cysteamine solution and then monitoring the release of the drug using UV-vis spectrophotometry. Vitamin E diffusion barriers were also added to lenses via ethanol solution, and the release of cysteamine from these modified lenses was also examined.

RESULTS

No leeching of carbon black was detected during experiments. Loading of pre-made contact lenses led to uneven distribution of carbon black throughout lens. Adding 0.3% carbon black to lens monomer solution prior to UV-curing led to even distribution and a transmittance reduction of approximately 50%. Ion permeability was reduced from 6.19 ± 0.90 x 10^-3 to 1.28 ± 0.06 x 10^-3 mm² min^-1, and Young's modulus was decreased from 1.58 ± 0.08 to 1.29 ± 0.06 MPa. Cysteamine releases from carbon black lenses with and without vitamin E were comparable to controls, although the loading solution of vitamin E/ethanol had to be tripled to achieve a similar mass loading to control.

CONCLUSIONS

Carbon black increases the softness of contact lenses, but a loading of 0.3% maintains lens parameters required for wear. The release of cysteamine is also possible with carbon black lenses, albeit requiring a higher loading concentration of vitamin E to achieve similar release times.

Spectroscopy of Oxygen-Sensitive Material for Measuring Contact Lens Oxygen Transmissibility

PURPOSE

Oxygen permeability or transmissibility is a crucial parameter for contact lenses to ensure that extended wear will not induce corneal hypoxia. This work tests a new method of using the oxidation of cysteamine, an oxygen-sensitive chemical, to quantify the oxygen transmissibility of current commercial contact lenses and contact lenses loaded with vitamin E.

METHODS

3D printing was used to modify eye drop bottles and quartz cuvettes to create systems that allowed insertion of a contact lens in between the cysteamine solution and air. Both systems were exposed to atmospheric conditions where the only path of entry for oxygen was through the contact lens. The entering oxygen reacted with cysteamine, and the rate of cysteamine oxidation was measured using UV-vis spectrophotometry. The rate was then stoichiometrically related to oxygen transmissibility.

RESULTS

The eye drop method predicted transmissibility values within 9% of established, commercial values. The cuvette method predicted values within 10% of established values for silicone hydrogel lenses without any correction factor and within 11% for poly-hydroxyethyl-methacrylate lenses after correcting for oxygen entering the system. Incorporation of 20% (w/w) vitamin E into Acuvue® Oasys® lenses did not have a significant impact on the oxygen transmissibility.

CONCLUSIONS

Both methods presented in this work can reliably measure oxygen transmissibility of contacts lenses or other materials. Further improvements in manufacturing could lead to improved accuracy and reliability, allowing wider use of this method for quantifying the oxygen transport in contact lenses.

The Ocular Status of Cystinosis Patients Receiving a Hospital Pharmacy-Made Preparation of Cysteamine Eye Drops: A Case Series

Introduction

Infantile nephropathic cystinosis (INC) is an autosomal recessive lysosomal disorder in which patients develop deposits of cystine crystals in their kidneys and corneas from a young age.

Methods

We conducted a retrospective analysis of children with INC seen by ophthalmologists at the Manchester Royal Eye Hospital between 2002 and 2018, to evaluate clinical findings, symptoms and treatment.

Results

Twenty-two children diagnosed with INC from age 0 (prenatally) to 11 years were assessed. All evaluable patients had corneal cystine crystal deposits, and 15 had mild to moderate photophobia. Ten patients had other ocular conditions including blepharitis/chalzion (n = 6), swollen optic nerve (n = 3), punctate epitheliopathy (n = 3), corneal scarring (n = 1),and elevated intraocular pressure (n = 2). Confocal imaging identified nerve abnormalities in two patients (enlarged corneal nerve + abnormal-looking tortuous nerves in one patient and beaded nerves in the sub-basal plexus in the other), both of whom had significant crystal deposition in the anterior stroma. Visual acuity was relatively unaffected. All 22 patients were receiving oral cysteamine, and 21 were applying cysteamine eye drops (galenic preparation of 0.55% concentration, compounded by a hospital pharmacy). Recommended application frequency was at least eight times per day in all patients with dosing information available.

Conclusions

This case series of patients with INC highlights the consistent pattern of corneal cystine crystal deposition, which is universally present from a young age in this condition, and the high incidence of photophobia even in young children. Corneal manifestations of INC persisted despite frequent administration of the hospital pharmacy-made eye drop preparation. Reasons for this lack of efficacy may include the lag period between diagnosis and first prescription of cysteamine eye drops and the difficulty in maintaining rigorous compliance with this treatment. In addition, the challenge for patients of maintaining optimal storage conditions may adversely affect the stability and efficacy of cysteamine within this preparation.

Funding

Editorial assistance was funded by Orphan Europe Ltd.

Latest Clinical Approaches in the Ocular Management of Cystinosis: A Review of Current Practice and Opinion from the Ophthalmology Cystinosis Forum

Cystinosis, a rare autosomal recessive disease caused by intracellular cystine accumulation, occurs in an estimated 1/100,000-200,000 live births. Ocular non-nephropathic cystinosis is typically diagnosed during adulthood, when patients present with corneal crystal deposition and no systemic involvement. Due to the rarity of the condition, diagnosis is often delayed and can have a significant impact on the overall prognosis of the disease. Early diagnosis is therefore imperative to ensure successful treatment and improve quality of life, as most of its clinical manifestations can be prevented or delayed. Early detection strategies and practical approaches for the ocular management of cystinosis were discussed during the Ophthalmology Cystinosis Forum, a 1-day meeting held in Berlin, Germany during June 2017. Recommendations for early detection comprise ophthalmic assessment, including self- and clinician-assessed recording of photophobia, and visual acuity, slit-lamp examination and tonometry ophthalmic examinations. In vivo confocal microscopy and anterior segment optical coherence tomography were highlighted as valuable techniques in evaluating cystine crystals in the cornea, in vivo and non-invasively. The mainstay of ocular cystinosis treatment is the cystine-depleting aminothiol cysteamine. Indeed, early treatment with and strict adherence to cysteamine therapy has a considerable impact on the long-term prognosis of ocular cystinosis. In rare diseases such as ocular cystinosis, standardised guidelines and recommendations for detection, patient care and follow-up assessments are essential. Such guidelines provide a support tool for healthcare professionals caring for ocular cystinosis patients. Multidisciplinary teams (MDTs) are essential for delivering gold standard care and improving quality of life for patients and their families. This review paper highlights current early detection policies, clinical treatment strategies and practical approaches for the ocular management of cystinosis, including implementing a cystinosis MDT. Additionally, discussions of the Ophthalmology Cystinosis Forum held in 2017 are summarised. FUNDING: Orphan Europe. Plain language summary available for this article.

Novel approaches for improving stability of cysteamine formulations

Cystinosis is a genetic disorder that leads to the formation of cystine crystals in many organs in the body including cornea. Ocular manifestation of this disease is treated by eye drops of cysteamine which can easily oxidize into its disulfide cystamine. The rapid oxidation limits the shelf life as well the duration during which the drug can be used after opening the eye drop bottle. We evaluate two approaches of preventing the oxidation of cysteamine with the goal of increasing the time of use after opening the bottle to one month. The first approach integrates antioxidants such as catalase enzyme and vitamins C and E into the aqueous solution. Results show that catalase is the most effective additive as it decreases the oxidation rate by 58%, which on its own is not sufficient to reach targeted one month stability. The second approach focuses on incorporating diffusion barriers to prevent oxygen from reaching the cysteamine solution. This was accomplished by two methods: formulation of a hydrophobic layer which floats on the surface of the aqueous solution and integration of OMAC® oxygen-resistant material into the eye drop bottle. Both methods delay the onset of cysteamine degradation and decrease the rate of degradation. In particular, an eye drop bottle with three layers of OMAC® has less than 10% degradation after one month of opening the bottle and withdrawing a drop each day. By integrating all three methods, we designed a system where >90% of cysteamine remains in the active form for 70 days after opening the bottle. In addition, we examine the use of OMAC® as heat-sealed pouches for storage of cysteamine eye drop bottles during packaging to eliminate the need for the current approach of freezing the formulation during shipping. The results show that such heat-sealed pouches would keep cysteamine stable for over one year at ambient conditions.