Probing the particulate microstructure of the aerodynamic particle size distribution of dry powder inhaler combination products

Predicting the Strength of Cohesive and Adhesive Interparticle Interactions for Dry Powder Inhalation Blends of Terbutaline Sulfate with α-Lactose Monohydrate

Grid-based systematic search methods are used to investigate molecule-molecule, molecule-surface, and surface-surface contributions to interparticle interactions in order to identify the crystal faces that most strongly affect particle behavior during powder blend formulation and delivery processes. The model system comprises terbutaline sulfate (TBS) as an active pharmaceutical ingredient (API) and α-form lactose monohydrate (LMH). A combination of systematic molecular modeling and X-ray computed tomography (XCT) is used to determine not only the adhesive and cohesive interparticle energies but, also the agglomeration behavior during manufacturing and de-agglomeration behavior during delivery after inhalation. This is achieved through a detailed examination of the balance between the adhesive and cohesive energies with the XCT results confirming the blend segregation tendencies, through the particle-particle de-agglomeration process. The results reveal that the cohesive interaction energies of TBS-TBS are higher than the adhesive energies between TBS and LMH, but that the cohesive energies of LMH-LMH are the smallest between molecule and molecule, molecule and surface, and surface and surface. This shows how systematic grid-search molecular modeling along with XCT can guide the digital formulation design of inhalation powders in order to achieve optimum aerosolization and efficacy for inhaled medicines. This will lead to faster pharmaceutical design with less variability, higher quality, and enhanced performance.

Cyclosporine A-loaded chitosan extra-fine particles for deep pulmonary drug delivery: In vitro and in vivo evaluation

In this study, the extra-fine dry powder inhalers (DPIs) with chitosan (CS) as carrier were successfully prepared by ionic gel method combined with spray drying technique for deep pulmonary drug delivery of Cyclosporine A (CsA), using sodium hyaluronate (SHA) and sodium polyglutamate (SPGA) as polyanions. The CsA-loaded DPIs of CS-SHA-CsA and CS-SPGA-CsA were spherical particles with wrinkles on the surface, which were more conducive to improving the aerosol properties. The aerodynamic evaluation of CS-SHA-CsA and CS-SPGA-CsA showed that the fine particle fraction (FPF) reached up to 79.22 ± 2.12% and 81.55 ± 0.43%, while the emitted fraction (EF) reached 77.15 ± 1.46% and 78.29 ± 2.10%. In addition, the mass median aerodynamic diameter (MMAD) was calculated as 1.58 ± 0.04 μm and 1.94 ± 0.02 μm for CS-SHA-CsA and CS-SPGA-CsA, indicating that they were all extra-fine particles (d < 2 μm). These in vitro aerodynamic results showed that CS-SHA-CsA and CS-SPGA-CsA could reach the smaller airways, further improving therapeutic efficiency. The cell viability on A549 cell line results showed that CS-SHA-CsA and CS-SPGA-CsA were safe to deliver CsA to lungs. The in vivo pharmacokinetics consequence proved that inhalation administration of CS-SHA-CsA and CS-SPGA-CsA could significantly improve the bioavailability of CsA in vivo compared with oral administration of Neoral®, effectively reducing the risk of a series of adverse effects caused by systemic overexposure. In addition, the safety and compatibility of DPIs using SHA, SPGA, and CS as carriers for pulmonary drug delivery was verified by in vivo repeated dose inhalation toxicity. From these findings, the extra-fine DPIs with CS as carrier could be a viable delivery option for the deep pulmonary drug delivery of CsA relative to orally administered drug.

Generic dry powder inhalers bioequivalence: Batch-to-batch variability insights

Active pharmaceutical ingredient(s) [API(s)] of dry powder inhalers (DPIs) deposition and their fate in the respiratory system are influenced by a complex matrix of formulation, device, manufacturing and physiological variations. DPIs on the market have shown bioinequivalence between batches of the same product. Despite being clinically insignificant, they affect bioequivalence studies when a generic product is compared with the originator. This review discusses implications of batch-to-batch variability on bioequivalence study outcomes and shortcomings of current regulatory requirements. Possible formulation and manufacturing factors resulting in batch-to-batch variability highlight the inherent nature of this issue. Despite scholarly investigations and official regulatory guidance, there remains a need for reliable and realistic in vitro tests that accurately guide a representative reference product batch selection.

Development of extra-fine particles containing nanosized meloxicam for deep pulmonary delivery: in vitro aerodynamic and cell line measurements

Pulmonary drug administration provides a platform for the effective local treatment of various respiratory diseases. Application of nano-sized active ingredients results in higher bioavailability because of their large specific surface area. Extra-fine dry powder inhalers reach the smaller airways, further improving therapeutic efficiency. Poorly water-soluble meloxicam was the selected active ingredient. We aimed to decrease the particle size into the nano range by wet milling and producing extra-fine inhalable particles via nano spray-drying. The diameter of the drug was reduced to 138 nm. The particle size of the dry products was between 1.1-1.5 µm, and the dispersed diameter was between 500-800 nm. Owing to the excipients (poly-vinyl-alcohol, leucine), the spray-dried particles presented nearly spherical morphology. The drug became partially amorphous. Thanks to the improved surface area, the solubility and the released and the diffused amount of the meloxicam increased in artificial lung media. The in vitro aerodynamic measurements showed that the leucine-containing formulations had outstanding fine particle fraction (FPF) deposition with 1.3 µm mass median aerodynamic diameter (MMAD). The aerodynamic particle counter test also proved the extra-fine aerodynamic particle size. The in vitro cell line experiments revealed the non-cytotoxicity of the products and the suppression of the interleukin concentration. Overall, the powders are suitable for deep pulmonary delivery and the local treatment of lung inflammations.

Porous particles and novel carrier particles with enhanced penetration for efficient pulmonary delivery of antitubercular drugs

This study aimed to design dry powder inhaler formulations using a hydrophilic polymeric polysaccharide, phytoglycogen (PyG), as a multi-functional additive that increases the phagocytic activity of macrophage-like cells and enhances pulmonary delivery of drugs. The safety and usefulness of PyG were determined using in vitro cell-based studies. Dry powder inhaler formulations of an antitubercular drug, rifampicin, were fabricated by spray drying with PyG. The cytotoxicity, effects on phagocytosis, particle size, and morphology were evaluated. The aerosolization properties of the powder formulations were evaluated using an Andersen cascade impactor (ACI). Scanning electron microscope images of the particles on each ACI stage were captured to observe the deposition behavior. PyG showed no toxicity in A549, Calu-3, or RAW264.7 cell lines. At concentrations of 0.5 and 1 g/L, PyG facilitated the cellular uptake of latex beads and the expression of pro-inflammatory cytokine genes in RAW264.7 cells. Formulations with outstanding inhalation potential were produced. The fine particle fraction (aerodynamic size 2-7 µm) of the porous particle batch reached nearly 60%, whereas in the formulation containing wrinkled carrier particles, the extra-fine particle fraction (aerodynamic particle size < 2 μm) was 25.0% ± 1.7%. The deposition of porous and wrinkled particles on individual ACI stages was distinct. The inclusion of PyG dramatically improved the inhalation performance of porous and wrinkled powder formulations. These easily inhaled immunostimulatory carrier particles may advance the state of research by enhancing the therapeutic effect and alveolar delivery of antitubercular drugs.

Novel approach for real-time monitoring of carrier-based DPIs delivery process via pulmonary route based on modular modified Sympatec HELOS

An explicit illustration of pulmonary delivery processes (PDPs) was a prerequisite for the formulation design and optimization of carrier-based DPIs. However, the current evaluation approaches for DPIs could not provide precise investigation of each PDP separately, or the approaches merely used a simplified and idealized model. In the present study, a novel modular modified Sympatec HELOS (MMSH) was developed to fully investigate the mechanism of each PDP separately in real-time. An inhaler device, artificial throat and pre-separator were separately integrated with a Sympatec HELOS. The dispersion and fluidization, transportation, detachment and deposition processes of pulmonary delivery for model DPIs were explored under different flow rates. Moreover, time-sliced measurements were used to monitor the PDPs in real-time. The Next Generation Impactor (NGI) was applied to determine the aerosolization performance of the model DPIs. The release profiles of the drug particles, drug aggregations and carriers were obtained by MMSH in real-time. Each PDP of the DPIs was analyzed in detail. Moreover, a positive correlation was established between the total release amount of drug particles and the fine particle fraction (FPF) values (R ² = 0.9898). The innovative MMSH was successfully developed and was capable of illustrating the PDPs and the mechanism of carrier-based DPIs, providing a theoretical basis for the design and optimization of carrier-based DPIs.

Moisture-Resistant Co-Spray-Dried Netilmicin with l-Leucine as Dry Powder Inhalation for the Treatment of Respiratory Infections

Netilmicin (NTM) is one of the first-line drugs for lower respiratory tract infections (LRTI) therapy, but its nephrotoxicity and ototoxicity caused by intravenous injection restrict its clinical application. Dry powder inhalation (DPI) is a popular local drug delivery system that is introduced as a solution. Due to the nature of NTM hygroscopicity that hinders its direct use through DPI, in this study, L-leucine (LL) was added into NTM dry powder to reduce its moisture absorption rate and improve its aerosolization performance. NTM DPIs were prepared using spray-drying with different LL proportions. The particle size, density, morphology, crystallinity, water content, hygroscopicity, antibacterial activity, in vitro aerosolization performance, and stability of each formulation were characterized. NTM DPIs were suitable for inhalation and amorphous with a corrugated surface. The analysis indicated that the water content and hygroscopicity were decreased with the addition of LL, whilst the antibacterial activity of NTM was maintained. The optimal formulation ND₂ (NTM:LL = 30:1) showed high fine particle fraction values (85.14 ± 8.97%), which was 2.78-fold those of ND₀ (100% NTM). It was stable after storage at 40 ± 2 °C, 75 ± 5% relative humidity (RH). The additional LL in NTM DPI successfully reduced the hygroscopicity and improved the aerosolization performance. NTM DPIs were proved to be a feasible and desirable approach for the treatment of LRTI.

Optical diagnostics studies of air flow and powder fluidisation in Nexthaler®. Part II: Use of fluorescent imaging to characterise transient release of fines from a dry powder inhaler

The fine particle fraction is a key indicator of therapeutic effectiveness of inhaled pharmaceutical aerosols. This paper presents a fluorescence imaging technique to visualise and characterise the emission of active pharmaceutical ingredient (API) fines in model formulations containing coarse lactose carrier and 1.5-2 μm diameter fluorescent microspheres (model API fines). A two-camera arrangement was used to acquire simultaneous images of spatial and temporal distribution of model API fines and fluidised powder formulation near the mouthpiece exit of a DPI. Digital image analysis showed that the model API fines were released along with the bulk of the powder dose. More rapidly accelerating airflows were found to cause earlier release of API fines. The fluorescence imaging technique analyses a substantial fraction of the aerosol plume and was found to provide effective time-resolved characterisation of the de-aggregation and release of API fines with consistent results across a wide range of model API concentrations. Future studies should demonstrate the usefulness of the fluorescence imaging technique across different formulations and DPI devices.