Mesoporous silica nanoparticles for enhanced lidocaine skin delivery

Advances in the use of local anesthetic extended-release systems in pain management

Pain management remains among the most common and largely unmet clinical problems today. Local anesthetics play an indispensable role in pain management. The main limitation of traditional local anesthetics is the limited duration of a single injection. To address this problem, catheters are often placed or combined with other drugs in clinical practice to increase the time that local anesthetics act. However, this method does not meet the needs of clinical analgesics. Therefore, many researchers have worked to develop local anesthetic extended-release types that can be administered in a single dose. In recent years, drug extended-release systems have emerged dramatically due to their long duration and efficacy, providing more possibilities for the application of local anesthetics. This paper summarizes the types of local anesthetic drug delivery systems and their clinical applications, discusses them in the context of relevant studies on local anesthetics, and provides a summary and outlook on the development of local anesthetic extended-release agents.

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

Tackling strong biofilm and multi-virulent vancomycin-resistant Staphylococcus aureus via natural alkaloid-based porous nanoparticles: perspective towards near future eradication

Introduction

As a growing direction, nano-based therapy has become a successful paradigm used to address the phytogenic delivery-related problems in overcoming multivirulent vancomycin-resistant Staphylococcus aureus (VRSA) infection.

Methods

Hence, our aim was to develop and assess a novel nanocarrier system (mesoporous silica nanoparticles, MPS-NPs) for free berberine (Free-BR) as an antimicrobial alkaloid against strong biofilm-producing and multi-virulent VRSA strains using in vitro and in vivo mouse model.

Results and discussion

Our outcomes demonstrated vancomycin resistance in 13.7% of Staphylococcus aureus (S. aureus) strains categorized as VRSA. Notably, strong biofilm formation was observed in 69.2% of VRSA strains that were all positive for icaA gene. All strong biofilm-producing VRSA strains harbored a minimum of two virulence genes comprising clfA and icaA with 44.4% of them possessing all five virulence genes (icaA, tst, clfA, hla, and pvl), and 88.9% being multi-virulent. The study findings affirmed excellent in vitro antimicrobial and antibiofilm properties of BR-loaded MPS-NPs. Real-time quantitative reverse transcription PCR (qRT-PCR) assay displayed the downregulating role of BR-loaded MPS-NPs on strong biofilm-producing and multi-virulent VRSA strains virulence and agr genes in both in vitro and in vivo mice models. Additionally, BR-loaded MPS-NPs supplementation has a promising role in attenuating the upregulated expression of pro-inflammatory cytokines' genes in VRSA-infected mice with attenuation in pro-apoptotic genes expression resulting in reduced VRSA-induced apoptosis. In essence, the current study recommends the future scope of using BR-loaded MPS-NPs as auspicious alternatives for antimicrobials with tremendous antimicrobial, antibiofilm, anti-quorum sensing (QS), and anti-virulence effectiveness against problematic strong biofilm-producing and multi-virulent VRSA-associated infections.

Silica nanoparticles: A review of their safety and current strategies to overcome biological barriers

Silica nanoparticles (SNP) have gained tremendous attention in the recent decades. They have been used in many different biomedical fields including diagnosis, biosensing and drug delivery. Medical uses of SNP for anti-cancer, anti-microbial and theranostic applications are especially prominent due to their exceptional performance to deliver many different small molecules and recently biologics (mRNA, siRNA, antigens, antibodies, proteins, and peptides) at targeted sites. The physical and chemical properties of SNP such as large specific surface area, tuneable particle size and porosity, excellent biodegradability and biocompatibility make them an ideal drug delivery and diagnostic platform. Based on the available data and the pre-clinical performance of SNP, recent interest has driven these innovative materials towards clinical application with many of the formulations already in Phase I and Phase II trials. Herein, the progress of SNP in biomedical field is reviewed, and their safety aspects are analysed. Importantly, we critically evaluate the key structural characteristics of SNP to overcome different biological barriers including the blood-brain barrier (BBB), skin, tumour barrier and mucosal barrier. Future directions, potential pathways, and target areas towards rapid clinical translation of SNP are also recommended.

Poly(2-vinylpyridine)/MCM-41 Composites with Micropores and Switchable Mesopores for the Removal of Cr(VI)

Porous structure design and reversible regulation of pore size during adsorption-desorption are crucial to the removal of pollutants in water such as Cr(VI). In this paper, micropores and switchable mesopores were constructed on MCM-41 to further improve adsorption-desorption performance of Cr(VI) via the confinement effect of micropores and opening and closing of mesopores. 2-Vinylpyridine was introduced and polymerized into the pores and on the pore mouth of MCM41 modified by C═C group (AM41) under the irradiation of ultraviolet light. The obtained samples (PM41) possessed mesopores (2.73 nm) and micropores (1.36 nm), where mesopores could open or close under different pH and micropores showed the confinement effect because their pore size is close to Cr(VI) diameter (0.87 nm). Compared with MCM-41, the introduction of poly(2-vinylpyridine) enhanced obviously its adsorptive ability and it trapped most of the Cr(VI) (99%) in solution, 12 times higher than that of the parent sample. The change of pore size is favorable to the cycle performance, and after 3 times recycling, the removal rate of Cr(VI) by PM41-20 remained above 88%. Langmuir isotherm showed a better data correlation than the Freundlich model. Cr(VI) in solution was removed by electrostatic interaction between the pyridine group and Cr(VI) and the confinement effect from micropores.

Recent Progress in Diatom Biosilica: A Natural Nanoporous Silica Material as Sustained Release Carrier

A drug delivery system (DDS) is a useful technology that efficiently delivers a target drug to a patient's specific diseased tissue with minimal side effects. DDS is a convergence of several areas of study, comprising pharmacy, medicine, biotechnology, and chemistry fields. In the traditional pharmacological concept, developing drugs for disease treatment has been the primary research field of pharmacology. The significance of DDS in delivering drugs with optimal formulation to target areas to increase bioavailability and minimize side effects has been recently highlighted. In addition, since the burst release found in various DDS platforms can reduce drug delivery efficiency due to unpredictable drug loss, many recent DDS studies have focused on developing carriers with a sustained release. Among various drug carriers, mesoporous silica DDS (MS-DDS) is applied to various drug administration routes, based on its sustained releases, nanosized porous structures, and excellent solubility for poorly soluble drugs. However, the synthesized MS-DDS has caused complications such as toxicity in the body, long-term accumulation, and poor excretion ability owing to acid treatment-centered manufacturing methods. Therefore, biosilica obtained from diatoms, as a natural MS-DDS, has recently emerged as an alternative to synthesized MS-DDS. This natural silica carrier is an optimal DDS platform because culturing diatoms is easy, and the silica can be separated from diatoms using a simple treatment. In this review, we discuss the manufacturing methods and applications to various disease models based on the advantages of biosilica.

Physiology of pregnancy and oral local anesthesia considerations

Background

Safe and effective local anesthesia is a prerequisite for emergency oral surgeries and most dental treatments. Pregnancy is characterized by complex physiological changes, and increased sensitivity to pain. Pregnant women are particularly vulnerable to oral diseases, such as caries, gingivitis, pyogenic granuloma and third molar pericoronitis. Maternally administered drugs can affect the fetus through the placenta. Therefore, many physicians and patients are reluctant to provide or accept necessary local anesthesia, which leads to delays in the condition and adverse consequences. This review is intended to comprehensively discuss the instructions for local anesthesia in the oral treatment of pregnant patients.

Methodology

An in-depth search on Medline, Embase, and the Cochrane Library was performed to review articles concerned with maternal and fetal physiology, local anesthetic pharmacology, and their applications for oral treatment.

Results

Standard oral local anesthesia is safe throughout the pregnancy. At present, 2% lidocaine with 1:200,000 epinephrine is considered to be the anesthetic agent that best balances safety and efficacy for pregnant women. Maternal and fetal considerations must be taken into account to accommodate the physiological and pharmacological changes in the gestation period. Semi-supine position, blood pressure monitoring, and reassurance are suggested for high-risk mothers to reduce the risk of transient changes in blood pressure, hypoxemia, and hypoglycemia. For patients with underlying diseases, such as eclampsia, hypertension, hypotension, and gestational diabetes, the physicians should use epinephrine cautiously and control the dose of anesthetic. New local anesthesia formulations and equipment, which contribute to minimizing injection pain and relieving the anxiety, have and are being developed but remain understudied.

Conclusions

Understanding the physiological and pharmacological changes during pregnancy is essential to ensure the safety and efficiency of local anesthesia. Optimal outcomes for the mother and fetus hinge on a robust understanding of the physiologic alterations and the appropriate selection of anesthetic drugs and approaches.

Deep eutectic solvents-Hydrogels for the topical management of rheumatoid arthritis

Deep eutectic solvents (DES) have demonstrated their ability to facilitate skin penetrability of rigid nanoparticles (NPs). Here, we reported a feasible and simple transdermal delivery strategy using mesoporous silica nanoparticles impregnated in DES hydrogels for topical management of rheumatoid arthritis (RA). To achieve this goal, nanoceria was immobilized within a silica nanoparticle matrix (MSN) and encapsulated with methotrexate (MTX). The functionalized nanoparticles were first engineered in an Arginine (Arg)-citric acid (CA) DES and then transferred to the carbomer hydrogel matrix. Due to the strong affinity of DES hydrogels to the skin, combined with solvent-driven "Drag" effects, the prepared DES-MSNs hydrogels produced dynamic mobility of MSNs through skin layers, resulting in high skin penetrability. After application to the skin, the hydrogel solvent drove the rigid NPs across the skin barrier in a nonintrusive manner, resulting in sustained penetration and accumulation of MSNs at subcutaneous inflammation sites. Subsequently, the MTX payload exerted a direct therapeutic effect, while nanoceria moderated the inflammatory microenvironment by initiating reactive oxygen species (ROS) scavenging and transformation of the macrophage phenotype. In this way, the synergistic action of the combination of immuno- and chemotherapy of the drug and its carrier on RA was achieved. Our work provides a novel strategy for multisite regulation and controlled management of RA in a noninvasive way.

Bioadhesive 3D-Printed Skin Drug Delivery Polymeric Films: From the Drug Loading in Mesoporous Silica to the Manufacturing Process

The alliance between 3D printing and nanomaterials brings versatile properties to pharmaceuticals, but few studies have explored this approach in the development of skin delivery formulations. In this study, clobetasol propionate (CP) was loaded (about 25% w/w) in mesoporous silica nanomaterial (MSN) to formulate novel bioadhesive and hydrophilic skin delivery films composed of pectin (5% w/v) and carboxymethylcellulose (5% w/v) by 3D printing. As a hydrophobic model drug, CP was encapsulated in MSN at a 3:1 (w/w) ratio, resulting in a decrease of CP crystallinity and an increase of its dissolution efficiency after 72 h (65.70 ± 6.52%) as compared to CP dispersion (40.79 ± 4.75%), explained by its partial change to an amorphous form. The CP-loaded MSN was incorporated in an innovative hydrophilic 3D-printable ink composed of carboxymethylcellulose and pectin (1:1, w/w), which showed high tensile strength (3.613 ± 0.38 N, a homogenous drug dose (0.48 ± 0.032 mg/g per film) and complete CP release after 10 h. Moreover, the presence of pectin in the ink increased the skin adhesion of the films (work of adhesion of 782 ± 105 mN·mm). Therefore, the alliance between MSN and the novel printable ink composed of carboxymethylcellulose and pectin represents a new platform for the production of 3D-printed bioadhesive films, opening a new era in the development of skin delivery systems.

Skin interaction, permeation, and toxicity of silica nanoparticles: Challenges and recent therapeutic and cosmetic advances

Silica nanoparticles (SNPs) received more attention with the emergence of nanotechnology with the aim and promise of becoming innovative drug delivery systems. They have been fulfilling this objective with excellence and nowadays they play a central role in biomedical applications. New SNPs application routes are being explored such as the epidermal, dermal, and transdermal routes. With that, novel models of synthesis, functionalization, and applications constantly appear. However, it is essential that such innovations are accompanied by in-depth studies on permeation, biodistribution, metabolization, and elimination of the generated by-products. Such studies are still incipient, if not rare. This article reviews significant findings on SNPs and their skin interactions. An extensive literature review on SNPs synthesis and functionalization methodologies was performed, as well as on the skin characteristics, skin permeation mechanisms, and in vivo toxicity assessments. Furthermore, studies of the past 5 years on the main therapeutic and cosmetic products employing SNPs, with greater emphasis on in vivo and ex vivo studies were included.

Dielectric Properties of Aqueous Electrolyte Solutions Confined in Silica Nanopore: Molecular Simulation vs. Continuum-Based Models

Dielectric behavior of electrolyte aqueous solutions with various concentrations in a cylindrical nanopore of MCM 41 silica has been investigated. The effect of confinement is investigated by using isothermal-isosurface-isobaric statistical ensemble, which has proved to be an effective alternative to the Grand Canonical Monte Carlo (GCMC) simulation method. Several single-salt solutions have been considered (e.g., NaCl, NaI, BaCl2, MgCl2) in order to investigate the effect of ion polarizability, ion size, and ion charge. The effect of salt concentration has also been addressed by considering NaCl solutions at different concentrations (i.e., 0.1 mol/L, 0.5 mol/L, and 1 mol/L). The motivation in performing this integrated set of simulations is to provide deep insight into the dielectric exclusion in NF theory that plays a significant role in separation processes. It was shown that the dielectric constant increased when ions were added to water inside the nanopore (with respect to the dielectric constant of confined pure water) unlike what was obtained in the bulk phase and this phenomenon was even more pronounced for electrolytes with divalent ions (MgCl2 and BaCl2). Therefore, our simulations indicate opposite effects of ions on the dielectric constant of free (bulk) and nanoconfined aqueous solutions.

The technology of transdermal delivery nanosystems: from design and development to preclinical studies

Transdermal administration has gained much attention due to the remarkable advantages such as patient compliance, drug escape from first-pass elimination, favorable pharmacokinetic profile and prolonged release properties. However, the major limitation of these systems is the limited skin penetration of the stratum corneum, the skin's most important barrier, which protects the body from the insertion of substances from the environment. Transdermal drug delivery systems are aiming to the disruption of the stratum corneum in order for the active pharmaceutical ingredients to enter successfully the circulation. Therefore, nanoparticles are holding a great promise because they can act as effective penetration enhancers due to their small size and other physicochemical properties that will be analyzed thoroughly in this report. Apart from the investigation of the physicochemical parameters, a comparison between the different types of nanoparticles will be performed. The complexity of skin anatomy and the unclear mechanisms of penetration should be taken into consideration to reach some realistic conclusions regarding the way that the described parameters affect the skin permeability. To the best of the authors knowledge, this is among the few reports on the literature describing the technology of transdermal delivery systems and how this technology affects the biological activity.

Tacrolimus encapsulated mesoporous silica nanoparticles embedded hydrogel for the treatment of atopic dermatitis

Atopic dermatitis (AD) is a repetitive inflammatory skin disorder with limited treatment options. Innovative targeted therapies are gaining significant interest and momentum towards disease control including better ways to deliver drugs topically. Tacrolimus is one such compound which is used to manage moderate to severe AD without causing atrophy which is one of the common side effects of steroids. However, Tacrolimus suffers from poor solubility and retention in the skin when used alone in hydrogel. Therefore, we have prepared Tacrolimus loaded mesoporous silica nanoparticles (TMSNs) to overcome the issues related to its solubility and effective topical delivery. Mesoporous silica nanoparticles (MSNs) were synthesized using sol gel technique and surface functionalized using amino (-NH₂⁺) and phosphonate (-PO₃^-) groups. Tacrolimus was loaded into MSNs and the particles were characterized for particle size (TEM and DLS), zeta potential (DLS), solubility studies, FTIR, TGA, XRD, BET and cytotoxicity studies. Water solubility of Tacrolimus was increased by 7 folds with phosphonate functionalized MSNs compared to free Tacrolimus. Further the TMSNs were incorporated in to carbopol gel, and the gel formulation was evaluated for various gel characterization tests (pH, spreadability, viscosity), in vitro tests (drug release, permeability studies) and in vivo tests (skin irritation study and efficacy studies) using 1-Fluoro-2,4-dinitrobenzene (DNFB) induced dermatitis in Balb/c mice. Results of in vitro and in vivo study showed that TMSNs loaded gel showed significantly higher amount of Tacrolimus retained (ex vivo - rat skin) and much higher reduction in ear thickness and improved histology (in vivo - in mice). Our data collectively suggest that MSNs incorporated hydrogel as a promising new formulation strategy for topical delivery of poorly soluble drugs.

Nanomaterials applied in wound healing: Mechanisms, limitations and perspectives

Internal and external factors cause various types of wounds on the skin. Infections, nonhealing chronic wounds, and aesthetic and functional recovery all cause challenges for clinicians. The development of nanotechnology in biomedicine has brought many new materials, methods and therapeutic targets for the treatment of wounds, which are believed to have great prospects. In this work, the nanomaterials applied in different stages to promote wound healing and systematically expounded their mechanisms were reviewed. Then, the difficulties and defects of the present research and suggested methods for improvement were pointed out. Moreover, based on the current application status of nanomaterials in wound treatment, some new ideas for subsequent studies were proposed and the feasibility of intelligent healing by real-time monitoring, precision regulation, and signal transmission between electronic signals and human nerve signals in the future were discussed. This review will provide valuable directions and spark new thoughts for researchers.

Can mesoporous nanoparticles promote bioavailability of topical pharmaceutics?

When applied to skin, particulate matter has been shown to accumulate in hair follicles. In addition to follicles, the skin topography also incorporates trench-like furrows where particles potentially can accumulate; however, the furrows have not been as thoroughly investigated in a drug delivery perspective. Depending on body site, the combined follicle orifices cover up to 10% of the skin surface, while furrows can easily cover 20%, reaching depths exceeding 25 µm. Hence, porous particles of appropriate size and porosity could serve as carriers for drugs to be released in the follicles prior to local or systemic absorption. In this paper, we combine multiphoton microscopy, scanning electron microscopy, and Franz cell diffusion technology to investigate ex-vivo skin accumulation of mesoporous silica particles (average size of 400-600 nm, 2, and 7 µm, respectively), and the potential of which as vehicles for topical delivery of the broad-spectrum antibiotic metronidazole. We detected smaller particles (400-600 nm) in furrows at depths of about 25 µm, also after rinsing, while larger particles (7 µm) where located more superficially on the skin. This implies that appropriately sized porous particles may serve as valuable excipients in optimizing bioavailability of topical formulations. This work highlights the potential of skin furrows for topical drug delivery.

Spray-Dried Rosuvastatin Nanoparticles for Promoting Hair Growth

In this research, we examined the effect of rosuvastatin calcium-loaded nanoparticles on the hair growth-promoting activity on Albino rats. Nanoparticles were prepared using 2:1 weight ratio of drug to methyl-β-cyclodextrin with 10, 20, and 30% stabilizers (phospholipid, polyvinyl pyrrolidone K30, and Compritol 888 ATO) using nanospray dryer. Subsequently, the prepared nanoparticles were evaluated for their process yield, particle size, polydispersity index, zeta potential, and in vitro drug release as well as in vivo studies. The dried nanoparticles showed process yield values up to 84% with particle size values ranging from 218 to 6258 nm, polydispersity index values ranging from 0.32 to 0.99, and zeta potential values ranging from - 6.1 to - 11.9 mV. Combination of methyl-β-cyclodextrin with 10% polyvinyl pyrrolidone K30 accomplished nanoparticles with the lowest particle size (218 nm) and polydispersity index (0.32) values. These nanoparticles had suitable process yield value (70.5%) and were able to retard drug release. The hair growth-promoting activity for the selected nanoparticles revealed the highest hair length values in Albino rats after 14 days of the hair growth study compared with non-medicated nanoparticles, nanoparticles' physical mixture, rosuvastatin solution, and marketed minoxidil preparation groups as well as the control group. The immunohistochemistry images for both selected nanoparticles and marketed minoxidil groups showed a significant increase in the diameter of hair follicle and percent area fraction of cytokeratin 19 in the outer root sheath of hair follicle compared with other tested groups. Rosuvastatin nanoparticles prepared by nanospray drying technique could be a good competitor to minoxidil for hair growth-promoting activity. Graphical abstract.

Interfacial interaction of anesthetic lidocaine and mesoporous silica nanoparticles in aqueous solutions and its release properties

Lidocaine has been used as a local anesthetic by injection. The controlled release of lidocaine loaded into nanospheres is necessary to reduce the onset time of the anesthetic effect or increase the anesthetic analgesia duration. In this study, mesoporous silica nanoparticles (MSNs) with a large specific surface area were prepared by a sol-gel method, and the interfacial interaction between MSNs and lidocaine positively charged in aqueous solutions at different concentrations was investigated by adsorption tests, Fourier-transformed infrared spectroscopy, thermogravimetry-differential thermal analysis, and Brunauer-Emmett-Teller (BET) measurements. The electrostatic interaction between Si-OH on MSNs and lidocaine-NH⁺ was of importance for the adsorption phenomenon in aqueous solutions, indicating the monolayer adsorption of lidocaine. BET measurements also supported the decrease of pore volumes, and the hysteresis loop of the isotherm curve was not closed since the condensation of lidocaine in the mesopores formed micropores of less than 1.5 nm in size. The release profiles in phosphate buffered saline containing calcium and magnesium ions showed a rapid and higher release of lidocaine compared with that in phosphate buffered saline without divalent cations. The released lidocaine concentrations were sufficient for the expression of the anesthetic effect in dental anesthesia.

Transdermal delivery of small interfering RNAs with topically applied mesoporous silica nanoparticles for facile skin cancer treatment

Small interfering RNA (siRNA) is a promising tool for the treatment of skin disorders including skin squamous cell carcinoma (SCC). This article develops a topical formulation for the transdermal delivery of siRNA. The formulation is built on mesoporous silica nanoparticles (MSNPs) with a loading capacity of 1.4 μg of oligonucleotide per mg of MSNPs. Cell experiments are employed to study the functionality of the formulation including the cellular uptake, the qualitative and quantitative detection of specific gene biomarkers. The clinical potential of this system is examined by topically delivering siRNA targeting TGFβR-1 (TGFβR-1) to the SCC in a mouse xenograft model. In comparison to the controls, MSNPs containing TGFβR-1 siRNA show a 2-fold suppression of TGFβR-1.

Silica-based nanosystems for therapeutic applications in the skin

Aging, exposure to oxidants, infectious pathogens, inflammogens, ultraviolet radiation and other environmental and genetic factors can result in the development of various skin disorders. Despite immense progress being made in dermatological treatments, many skin-associated problems still remain difficult to treat and various therapies have limitations. Progress in silica-based nanomaterials research provides an opportunity to overcome these drawbacks and improve therapies and is a promising tool for inclusion in clinical practice to treat skin diseases. This review focuses on the use of various types of silica nanoparticles with therapeutic applications in various skin disorders. These nanosystems improve treatment efficacy by maintaining or enhancing the effect of several drugs and are useful tools for nanomedicine, pharmaceutical sciences and future clinical applications.

Nanoparticles Functionalized with Venom-Derived Peptides and Toxins for Pharmaceutical Applications

Venom-derived peptides display diverse biological and pharmacological activities, making them useful in drug discovery platforms and for a wide range of applications in medicine and pharmaceutical biotechnology. Due to their target specificities, venom peptides have the potential to be developed into biopharmaceuticals to treat various health conditions such as diabetes mellitus, hypertension, and chronic pain. Despite the high potential for drug development, several limitations preclude the direct use of peptides as therapeutics and hamper the process of converting venom peptides into pharmaceuticals. These limitations include, for instance, chemical instability, poor oral absorption, short halflife, and off-target cytotoxicity. One strategy to overcome these disadvantages relies on the formulation of bioactive peptides with nanocarriers. A range of biocompatible materials are now available that can serve as nanocarriers and can improve the bioavailability of therapeutic and venom-derived peptides for clinical and diagnostic application. Examples of isolated venom peptides and crude animal venoms that have been encapsulated and formulated with different types of nanomaterials with promising results are increasingly reported. Based on the current data, a wealth of information can be collected regarding the utilization of nanocarriers to encapsulate venom peptides and render them bioavailable for pharmaceutical use. Overall, nanomaterials arise as essential components in the preparation of biopharmaceuticals that are based on biological and pharmacological active venom-derived peptides.

Green Nanotechnology-Driven Drug Delivery Assemblies

Green nanotechnology incorporates the principles of green chemistry and green engineering to fabricate innocuous and eco-friendly nanoassemblies to combat the problems affecting the human health or environment. Subsequently, amalgamation of green nanotechnology with drug delivery area has actually commenced a new realm of "green nanomedicine". The burgeoning demand for green nanotechnology-driven drug delivery systems has led to the development of different types of delivery devices, like inorganic (metallic) nanoparticles, quantum dots, organic polymeric nanoparticles, mesoporous silica nanoparticles, dendrimers, nanostructured lipid carriers, solid lipid nanoparticles, etc. The present article deals with a brief account of delivery devices produced from green methods and describes site-specific drug delivery systems (including their pros and cons) and their relevance in the field of green nanomedicine.

Amorphous silicon dioxide nanoparticles modulate immune responses in a model of allergic contact dermatitis

Amorphous silicon dioxide nanoparticles (SiNPs) are ubiquitous, and they are currently found in cosmetics, drugs, and foods. Biomedical research is also focused on using these nanoparticles as drug delivery and bio-sensing platforms. Due to the high potential for skin exposure to SiNPs, research into the effect of topical exposure on both healthy and inflammatory skin models is warranted. While we observe only minimal effects of SiNPs on healthy mouse skin, there is an immunomodulatory effect of these NPs in a model of allergic contact dermatitis. The effect appears to be mediated partly by keratinocytes and results in decreases in epidermal hyperplasia, inflammatory cytokine release, immune cell infiltration, and a subsequent reduction in skin swelling. Additional research is required to further our mechanistic understanding and to validate the extent of this immunomodulatory effect in human subjects in order to assess the potential prophylactic use of SiNPs for treating allergic skin conditions.

Antioxidant Nanomaterial Based on Core⁻Shell Silica Nanospheres with Surface-Bound Caffeic Acid: A Promising Vehicle for Oxidation-Sensitive Drugs

The design of efficient, biocompatible, and easily prepared vehicles for drug delivery is a subject of great interest for medicine and pharmaceutical sciences. To achieve the above goals, surface functionalization is critical. Here, we report a hybrid nanocarrier consisting of core⁻shell silica nanospheres and the antioxidant caffeic acid linked to the surface, to evaluate their in vitro antioxidant capacity, their capability to protect oxidation-sensitive compounds incorporated in nanoparticles, and to study the interaction with bovine serum albumin protein. The results show that the radical-scavenging activity of immobilized caffeic acid is attenuated in the silica nanospheres; however, other antioxidant properties such as Fe2+-chelating activity and singlet oxygen quenching are enhanced. In addition, caffeic acid is protected from binding to proteins by the nanoparticle, suggesting that this nanosystem is more likely to maintain the antioxidant activity of caffeic acid in biological media. Finally, the natural antioxidant barrier on the nanocarrier is able to delay the degradation of a compound incorporated into this nanovehicle. Considering all findings, this work proposes a suitable tool for pharmaceutical and cosmetic industries as an antioxidant nanocarrier for oxidation-sensitive drugs.