Reconstituted spray-dried phenytoin-loaded nanocapsules improve the in vivo phenytoin anticonvulsant effect and the survival time in mice

Unveiling the potential of chitosan-coated lipid nanoparticles in drug delivery for management of critical illness: a review

Chitosan (CT), a natural, cationic, chemically stable molecule, biocompatible, biodegradable, nontoxic, polysaccharide derived from the deacetylation of chitin, has very uniquely surfaced as a material of promise for drug delivery and biomedical applications. For the oral, ocular, cutaneous, pulmonary, and nose-to-brain routes, CT-coated nanoparticles (CTCNPs) have numerous advantages, consisting of improved controlled drug release, physicochemical stability, improved cell and tissue interactions, and increased bioavailability and efficacy of the active ingredient. CTCNPs have a broad range of therapeutic properties including anticancer, antiviral, antifungal, anti-inflammatory, antibacterial properties, treating neurological disorders, and other diseases. This has led to substantial research into the many potential uses of CT as a drug delivery vehicle. CT has also been employed in a wide range of biomedical processes, including bone and cartilage tissue regeneration, ocular tissue regeneration, periodontal tissue regeneration, heart tissue regeneration, and wound healing. Additionally, CT has been used in cosmeceutical, bioimaging, immunization, and gene transfer applications. CT exhibits a number of biological activities, which are the basis for its remarkable potential for use as a drug delivery vehicle, and these activities are covered in detail in this article. The alterations applied to CT to obtain the necessary properties have been described.

Antiepileptic drug-loaded and multifunctional iron oxide@silica@gelatin nanoparticles for acid-triggered drug delivery

The current study developed an innovative design for the production of smart multifunctional core-double shell superparamagnetic nanoparticles (NPs) with a focus on the development of a pH-responsive drug delivery system tailored for the controlled release of Phenytoin, accompanied by real-time monitoring capabilities. In this regard, the ultra-small superparamagnetic iron oxide@silica NPs (IO@Si MNPs) were synthesized and then coated with a layer of gelatin containing Phenytoin as an antiepileptic drug. The precise saturation magnetization value for the resultant NPs was established at 26 emu g-1. The polymeric shell showed a pH-sensitive behavior with the capacity to regulate the release of encapsulated drug under neutral pH conditions, simultaneously, releasing more amount of the drug in a simulated tumorous-epileptic acidic condition. The NPs showed an average size of 41.04 nm, which is in the desired size range facilitating entry through the blood-brain barrier. The values of drug loading and encapsulation efficiency were determined to be 2.01 and 10.05%, respectively. Moreover, kinetic studies revealed a Fickian diffusion process of Phenytoin release, and diffusional exponent values based on the Korsmeyer-Peppas equation were achieved at pH 7.4 and pH 6.3. The synthesized NPs did not show any cytotoxicity. Consequently, this new design offers a faster release of PHT at the site of a tumor in response to a change in pH, which is essential to prevent epileptic attacks.

Layer-by-layer assembly of nanotheranostic particles for simultaneous delivery of docetaxel and doxorubicin to target osteosarcoma

Osteosarcoma (OS) is a rare form of primary bone cancer, impacting approximately 3.4 × 106 individuals worldwide each year, primarily afflicting children. Given the limitations of existing cancer therapies, the emergence of nanotheranostic platforms has generated considerable research interest in recent decades. These platforms seamlessly integrate therapeutic potential of drug compounds with the diagnostic capabilities of imaging probes within a single construct. This innovation has opened avenues for enhanced drug delivery to targeted sites while concurrently enabling real-time monitoring of the vehicle's trajectory. In this study, we developed a nanotheranostic system employing the layer-by-layer (LbL) technique on a core containing doxorubicin (DOXO) and in-house synthesized carbon quantum dots. By utilizing chitosan and chondroitin sulfate as polyelectrolytes, we constructed a multilayered coating to encapsulate DOXO and docetaxel, achieving a coordinated co-delivery of both drugs. The LbL-functionalized nanoparticles exhibited an approximate size of 150 nm, manifesting a predominantly uniform and spherical morphology, with an encapsulation efficiency of 48% for both drugs. The presence of seven layers in these systems facilitated controlled drug release over time, as evidenced by in vitro release tests. Finally, the impact of the LbL-functionalized nanoparticles was evaluated on U2OS and Saos-2 osteosarcoma cells. The synergistic effect of the two drugs was found to be crucial in inducing cell death, particularly in Saos-2 cells treated with nanoparticles at concentrations higher than 10 μg/ml. Transmission electron microscopy analysis confirmed the internalization of the nanoparticles into both cell types through endocytic mechanisms, revealing an underlying mechanism of necrosis-induced cell death.

State of the art in pediatric nanomedicines

In recent years, the continuous development of innovative nanopharmaceuticals is expanding their biomedical and clinical applications. Nanomedicines are being revolutionized to circumvent the limitations of unbound therapeutic agents as well as overcome barriers posed by biological interfaces at the cellular, organ, system, and microenvironment levels. In many ways, the use of nanoconfigured delivery systems has eased challenges associated with patient differences, and in our opinion, this forms the foundation for their potential usefulness in developing innovative medicines and diagnostics for special patient populations. Here, we present a comprehensive review of nanomedicines specifically designed and evaluated for disease management in the pediatric population. Typically, the pediatric population has distinguishing needs relative to those of adults majorly because of their constantly growing bodies and age-related physiological changes, which often need specialized drug formulation interventions to provide desirable therapeutic effects and outcomes. Besides, child-centric drug carriers have unique delivery routes, dosing flexibility, organoleptic properties (e.g., taste, flavor), and caregiver requirements that are often not met by traditional formulations and can impact adherence to therapy. Engineering pediatric medicines as nanoconfigured structures can potentially resolve these limitations stemming from traditional drug carriers because of their unique capabilities. Consequently, researchers from different specialties relentlessly and creatively investigate the usefulness of nanomedicines for pediatric disease management as extensively captured in this compilation. Some examples of nanomedicines covered include nanoparticles, liposomes, and nanomicelles for cancer; solid lipid and lipid-based nanostructured carriers for hypertension; self-nanoemulsifying lipid-based systems and niosomes for infections; and nanocapsules for asthma pharmacotherapy.

Bioadhesive 3D-Printed Skin Drug Delivery Polymeric Films: From the Drug Loading in Mesoporous Silica to the Manufacturing Process

The alliance between 3D printing and nanomaterials brings versatile properties to pharmaceuticals, but few studies have explored this approach in the development of skin delivery formulations. In this study, clobetasol propionate (CP) was loaded (about 25% w/w) in mesoporous silica nanomaterial (MSN) to formulate novel bioadhesive and hydrophilic skin delivery films composed of pectin (5% w/v) and carboxymethylcellulose (5% w/v) by 3D printing. As a hydrophobic model drug, CP was encapsulated in MSN at a 3:1 (w/w) ratio, resulting in a decrease of CP crystallinity and an increase of its dissolution efficiency after 72 h (65.70 ± 6.52%) as compared to CP dispersion (40.79 ± 4.75%), explained by its partial change to an amorphous form. The CP-loaded MSN was incorporated in an innovative hydrophilic 3D-printable ink composed of carboxymethylcellulose and pectin (1:1, w/w), which showed high tensile strength (3.613 ± 0.38 N, a homogenous drug dose (0.48 ± 0.032 mg/g per film) and complete CP release after 10 h. Moreover, the presence of pectin in the ink increased the skin adhesion of the films (work of adhesion of 782 ± 105 mN·mm). Therefore, the alliance between MSN and the novel printable ink composed of carboxymethylcellulose and pectin represents a new platform for the production of 3D-printed bioadhesive films, opening a new era in the development of skin delivery systems.

Powder filling of electrospun material in vials: A proof-of-concept study

The present paper reports the powder filling of milled electrospun materials in vials, which contained voriconazole and sulfobutylether-β-cyclodextrin. High-speed electrospinning was used for the production of the fibrous sample, which was divided into 6 parts. Each portion was milled using different milling methods and sizes of sieves to investigate whether the milling influences the powder and filling properties. Bulk and tapped density tests, laser diffraction and angle of repose measurements were applied to characterize the milled powders, while a vibratory feeder was used for the feeding experiments. The correlation between the material property descriptors and the feeding responses was investigated by multivariate data analysis. Based on the results, three samples were chosen for the vial filling, which was accomplished with 3400 mg electrospun material containing 200 mg voriconazole, representative of the commercial product. The feed rate was set to fit the 240 g/h production rate of the electrospinning and the relative standard deviation of three repeated vial filling was determined to see the accuracy of the process. This research shows that by applying a suitable milling method it is possible to process electrospun fibers to a powder, which can be filled into vials and used as reconstitution dosage forms.

Microemulsion-Based Media in Nose-to-Brain Drug Delivery

Nose-to-brain drug delivery has recently attracted enormous attention as an alternative to other delivery routes, including the most popular oral one. Due to the unique anatomical features of the nasal cavity, drugs administered intranasally can be delivered directly to the central nervous system. The most important advantage of this approach is the ability to avoid the blood-brain barrier surrounding the brain and blocking the entry of exogenous substances to the central nervous system. Moreover, selective brain targeting could possibly avoid peripheral side effects of pharmacotherapy. The challenges associated with nose-to-brain drug delivery are mostly due to the small volume of the nasal cavity and insufficient drug absorption from nasal mucosa. These issues could be minimized by using a properly designed drug carrier. Microemulsions as potential drug delivery systems offer good solubilizing properties and the ability to enhance drug permeation through biological membranes. The aim of this review is to summarize the current status of the research focused on microemulsion-based systems for nose-to-brain delivery with special attention to the most extensively investigated neurological and psychiatric conditions, such as neurodegenerative diseases, epilepsy, and schizophrenia.

Spray drying as an advantageous strategy for enhancing pharmaceuticals bioavailability

Spray drying is an efficient technique that is used not only for rapid evaporation of the solvent from different systems but also for designing ultra-fine particles with various desirable characteristics. The obtained powders demonstrate reasonably narrow size distribution with a submicron-to-micron size range. It is one of the recent techniques applied to present acceptable solutions to enhance the absorption and bioavailability of some challenging drugs. In view of that, the purpose of this review is to shed some light on the wide variety of the recently developed fine particulate products that can be produced from spray-drying technique. This article reports the most outstanding advantages and challenges that could be overcome by exploiting the spray-drying technique for the production of different pharmaceuticals, including pure drug particles and drug-loaded polymeric carriers. The potential of this technique, whether used alone or in combination with other methods, in order to develop reproducible and scalable procedures for the best translation of bench-to-bedside innovation of pharmaceutical products is hereby discussed.

Phenytoin-loaded lipid-core nanocapsules improve the technological properties and in vivo performance of fluidised bed granules

Lipid-core nanocapsules (LNCs) were recently reported by our group as a suitable binder system to produce fluidised bed granules. However, there is still a lack of knowledge about the influence of using these nanocarriers loaded with a drug on the properties of the granules and their in vivo performance. Therefore, this study was designed to produce innovative fluidised bed granules containing phenytoin-loaded LNCs (LNC_PHT) as a strategy to evaluate the influence of the presence of the drug-loaded nanocarriers on their in vitro and in vivo properties. Granules were produced using a mixture of maltodextrin and phenytoin (1:0.004 w/w) as substrate. They were prepared by fluid bed granulation using water or LNC_PHT as the liquid binder, affording good yields (73-82%) of granules with low moisture content (<5%). Granules prepared with LNC_PHT had larger mean size (122 μm) compared to maltodextrin primary particles (50 μm) due to the formation of solid bridges. Moreover, the use of LNC_PHT as the liquid binder improved their powder flow properties. The nanocarriers were recovered after aqueous dispersion (3.00 mg.mL^-1 of PHT) with a redispersibility close to 90%. After reconstitution in water, granules containing LNC_PHT showed an improved dissolution behaviour compared to those prepared without them. In addition, they showed a higher mucoadhesive effect due to a combined effect of the LNC_PHT and maltodextrin in the interactions with porcine intestinal mucosa. Regarding the in vivo studies, granules containing the combination of non-encapsulated PHT and PHT-loaded lipid-core nanocapsules increased the latency to seizures compared to placebo granules, showing effective anticonvulsant effect in mice. In conclusion, the use of drug-loaded nanocapsules as binder is an encouraging approach to produce fluidised bed mucoadhesive granules with improved technological properties and in vivo performance.

Lipid-core nanocapsules are an alternative to the pulmonary delivery and to increase the stability of statins

Aims: Lipid-core nanocapsules (LNCs) loaded with simvastatin (SV, SV-LNC) or lovastatin (LV, LV-LNC) were formulated for pulmonary administration. Methods: The LNC suspensions were characterized physicochemically, their stability was evaluated, and drug delivery by the pulmonary route was tested in vitro. Results: The loaded LNCs had a particle size close to 200 nm, a low polydispersity index, and a zeta potential around -20 mV. The encapsulation efficiency was high for SV (99.21 ± 0.7%) but low for LV (20.34 ± 1.2%). SV release from nanocapsules was slower than it was from SV in solution, with a monoexponential release profile, and the drug emitted and aerosol output rate was higher for SV-LNCs (1.58 µg/s) than for SV in suspension (0.54 µg/s). Conclusions: SV-LNCs had a median aerodynamic diameter of 3.51 µm and a highly respirable fraction (61.9%), indicating that nanoparticles are a suitable system for efficient delivery of simvastatin to the lung.