New studies on leachables in commercial scale protein drug filling lines using stir bar sorptive extraction coupled with TD-GC–MS and UPLC/QTOF-MS/MS analytics

Identification of nonvolatile organic compounds (NVOCs) in biopharmaceuticals through non-target analysis and quantification using complexation-precipitation extraction

Single-use systems in biopharmaceutical manufacturing can potentially release chemical constituents (leachables) into drug products. Prior to conducting toxicological risk assessments, it is crucial to establish the qualitative and quantitative methods for these leachables. In this study, we conducted a comprehensive screening and structure elucidation of 23 leachables (nonvolatile organic compounds, NVOCs) in two antibody drugs using multiple (self-built and public) databases and mass spectral simulation. We identified 7 compounds that have not been previously reported in medical or medicinal extractables and leachables. The confidence levels for identified compounds were classified based on analytical standards, literature references, and fragment assignments. Most of the identified leachables were found to be plasticizers, antioxidants, slip agents or polymer degradants. Polysorbate (namely Tween) is commonly used as an excipient for protein stabilization in biopharmaceutical formulations, but its ionization in liquid chromatography-electrospray ionization mass spectrometry can interfere with compound quantification. To address this, we employed a complexation-precipitation extraction method to reduce polysorbate content and quantify the analytes. The developed quantitative method for target NVOCs demonstrated high sensitivity (limit of quantification: 20 or 50 μg/L), accuracy (recoveries: 77.2 to 109.5 %) and precision (RSD ≤ 8.2 %). Overall, this established method will facilitate the evaluation of NVOC safety in drug products.

Dimethylsilanediol from silicone elastomers: Analysis, release from biopharmaceutical process equipment, and clearance studies

Polysiloxanes are considered one of the most important commercial families of synthetic elastomers. They are frequently employed in biopharmaceutical manufacturing equipment as flexible single-use solutions due to superior material properties and compatibility with diverse sterilization methods. Extractables and leachables (E&L) testing is essential in qualifying such equipment, involving extraction studies to assess the potential release of compounds from plastic components for risk assessment. Silicone releases oligomeric siloxanes and small hydrolysis products, with dimethylsilanediol (DMSD) being the main hydrolysis product found in significant concentrations in aqueous process solutions. DMSD presents challenges for analysis, requiring specifically tailored analytical methods to detect it, which are commonly not applied in standard E&L screening tests. In biopharmaceutical manufacturing, it is relevant to consider the potential of DMSD to repolymerize into silicone oil when specific process parameters are altered. This may lead to interactions with drug ingredients, including proteins, resulting in the formation of aggregates. We synthesized and characterized DMSD using X-ray structure analysis and established an HPLC method with a refractive index detector to investigate the release of DMSD from commercially available silicone tubing used in drug manufacturing following autoclaving and irradiation. Subsequently, we assessed typical biopharmaceutical downstream operations for effectively removing this compound from the process stream.

Surface-Induced Protein Aggregation and Particle Formation in Biologics: Current Understanding of Mechanisms, Detection and Mitigation Strategies

Protein stability against aggregation is a major quality concern for the production of safe and effective biopharmaceuticals. Amongst the different drivers of protein aggregation, increasing evidence indicates that interactions between proteins and interfaces represent a major risk factor for the formation of protein aggregates in aqueous solutions. Potentially harmful surfaces relevant to biologics manufacturing and storage include air-water and silicone oil-water interfaces as well as materials from different processing units, storage containers, and delivery devices. The impact of some of these surfaces, for instance originating from impurities, can be difficult to predict and control. Moreover, aggregate formation may additionally be complicated by the simultaneous presence of interfacial, hydrodynamic and mechanical stresses, whose contributions may be difficult to deconvolute. As a consequence, it remains difficult to identify the key chemical and physical determinants and define appropriate analytical methods to monitor and predict protein instability at these interfaces. In this review, we first discuss the main mechanisms of surface-induced protein aggregation. We then review the types of contact materials identified as potentially harmful or detected as potential triggers of proteinaceous particle formation in formulations and discuss proposed mitigation strategies. Finally, we present current methods to probe surface-induced instabilities, which represent a starting point towards assays that can be implemented in early-stage screening and formulation development of biologics.

Transformation of Biopharmaceutical Manufacturing Through Single-Use Technologies: Current State, Remaining Challenges, and Future Development

Single-use technologies have transformed conventional biopharmaceutical manufacturing, and their adoption is increasing rapidly for emerging applications like antibody-drug conjugates and cell and gene therapy products. These disruptive technologies have also had a significant impact during the coronavirus disease 2019 pandemic, helping to advance process development to enable the manufacturing of new monoclonal antibody therapies and vaccines. Single-use systems provide closed plug-and-play solutions and enable process intensification and continuous processing. Several challenges remain, providing opportunities to advance single-use sensors and their integration with single-use systems, to develop novel plastic materials, and to standardize design for interchangeability. Because the industry is changing rapidly, a holistic analysis of the current single-use technologies is required, with a summary of the latest advancements in materials science and the implementation of these technologies in end-to-end bioprocesses.

Metabolomics Research in Periodontal Disease by Mass Spectrometry

Periodontology is a newer field relative to other areas of dentistry. Remarkable progress has been made in recent years in periodontology in terms of both research and clinical applications, with researchers worldwide now focusing on periodontology. With recent advances in mass spectrometry technology, metabolomics research is now widely conducted in various research fields. Metabolomics, which is also termed metabolomic analysis, is a technology that enables the comprehensive analysis of small-molecule metabolites in living organisms. With the development of metabolite analysis, methods using gas chromatography–mass spectrometry, liquid chromatography–mass spectrometry, capillary electrophoresis–mass spectrometry, etc. have progressed, making it possible to analyze a wider range of metabolites and to detect metabolites at lower concentrations. Metabolomics is widely used for research in the food, plant, microbial, and medical fields. This paper provides an introduction to metabolomic analysis and a review of the increasing applications of metabolomic analysis in periodontal disease research using mass spectrometry technology.

Chemical Characterization and Non-targeted Analysis of Medical Device Extracts: A Review of Current Approaches, Gaps, and Emerging Practices

The developers of medical devices evaluate the biocompatibility of their device prior to FDA's review and subsequent introduction to the market. Chemical characterization, described in ISO 10993-18:2020, can generate information for toxicological risk assessment and is an alternative approach for addressing some biocompatibility end points (e.g., systemic toxicity, genotoxicity, carcinogenicity, reproductive/developmental toxicity) that can reduce the time and cost of testing and the need for animal testing. Additionally, chemical characterization can be used to determine whether modifications to the materials and manufacturing processes alter the chemistry of a patient-contacting device to an extent that could impact device safety. Extractables testing is one approach to chemical characterization that employs combinations of non-targeted analysis, non-targeted screening, and/or targeted analysis to establish the identities and quantities of the various chemical constituents that can be released from a device. Due to the difficulty in obtaining a priori information on all the constituents in finished devices, information generation strategies in the form of analytical chemistry testing are often used. Identified and quantified extractables are then assessed using toxicological risk assessment approaches to determine if reported quantities are sufficiently low to overcome the need for further chemical analysis, biological evaluation of select end points, or risk control. For extractables studies to be useful as a screening tool, comprehensive and reliable non-targeted methods are needed. Although non-targeted methods have been adopted by many laboratories, they are laboratory-specific and require expensive analytical instruments and advanced technical expertise to perform. In this Perspective, we describe the elements of extractables studies and provide an overview of the current practices, identified gaps, and emerging practices that may be adopted on a wider scale in the future. This Perspective is outlined according to the steps of an extractables study: information gathering, extraction, extract sample processing, system selection, qualification, quantification, and identification.

Using extractables data from single-use components for extrapolation to process equipment-related leachables: The toolbox and justifications

Quantitative information on process equipment-related leachables (PERLs) is required for process qualification and within a safety assessment. Extractables data for single-use equipment are suitable and applicable if the extractables study conditions fit or are bracketing the expected conditions of use. It is necessary to extrapolate extractables data when the expected in-use conditions are not covered by the test conditions. Methods for such quantitative extrapolation of extractables data toward potential PERLs are therefore needed. They are comprehensively described in this publication and include: scaling of extractables data for devices of different sizes adjusted to process-volumes, extrapolation to temperatures different from the extraction temperature, extrapolations to different solvent compositions, extrapolation to various contact times, and the combination of extractables data from individual components to assess assemblies. These extrapolation methods yield extractables data as if an extractables study had been performed. The methods presented are consistently derived from basic physicochemical principles. The relevant, underlying physical parameters are obtained from extractables experiments and are compared with published data. The applicability and justification of the proposed calculation methods are discussed and benchmarked against experimental findings.

Prefilled dual chamber devices (DCDs) - Promising high-quality and convenient drug delivery system

Prefilled dual chamber devices (DCDs) are combination products containing freeze-dried drug and diluent in two separate chambers of the device. DCDs provide high stability and convenience to patients and doctors, thus significantly improving product quality, patient compliance and market competitiveness. DCDs should also provide seal integrity, sterility and compatibility with biopharmaceuticals and avoid leachability and needle stick injuries. DCDs are promising alternatives to traditional containers or devices for biopharmaceuticals. The regulatory and medical practice to choose plastic DCDs as better alternatives over well-established glass syringes will be addressed here. The impact and major issues during processing, manufacturing, and storage of DCDs are also highlighted. Further discussion clears its business potential, composition, stability testing, and quality standard requirements to deal with market competition. It also covers major role of extractables and leachables in storage stability of the product.

Surface area expansion by flower-like nanoscale layered double hydroxides for high efficient stir bar sorptive extraction

Enhancing the surface area of stationary phase is essential in chromatographic science. In this work, nanoscale NiAl-layered double hydroxides (NiAl-LDHs) with flower-like structure was used as a platform for supporting the stationary phase. Then strong hydrophobic p-naphtholbenzein molecule was immobilized onto the LDHs layer as sorbent for stir bar sorptive extraction (SBSE). The flower-like LDHs layer significantly increased the extraction efficiency through increasing the specific surface area and immobilized amounts of stationary phase. In addition, the LDHs can also provide anion exchange ability, which expanded the application of this stir bar for analysis of not only hydrophobic but also anionic analytes. For improving the workability, a poly(ether ether ketone) (PEEK) jacket stir bar with detachable dumbbell-shaped structure was employed. The PEEK jacket with high mechanical strength and dumbbell-shaped structure improved the durability of stir bar and the detectable design allowed elution to be realized with less solvent that enhanced the enrichment factor. The proposed stir bar showed good performance for the extraction of multiple analytes including flavonoids, non-steroid anti-inflammatory drugs and chlorophenoxy acids. By coupling with high performance liquid chromatography-ultraviolet detection (HPLC-UV), the SBSE-HPLC-UV method was applied for the extraction of three active components including bavachin, isobavachalcone and bavachinin in Psoralea corylifolia L. herb with low limit detection of 0.01-0.02 ng/mL.