Novel extended in vitro-in vivo correlation model for the development of extended-release formulations for baclofen: From formulation composition to in vivo pharmacokinetics

A Rapid, Sensitive, and High-throughput Method for the Simultaneous Determination of Antihypertensive Drug Combinations in Dog Plasma by UHPLC-MS/MS: The Assessment of Predicable Bioequivalence of In-vitro Dissolution Condition

BACKGROUND

Essential hypertension is a common clinical disease and a risk factor for cardiovascular and cerebrovascular diseases. Olmesartan medoxomil, amlodipine, and hydrochlorothiazide are commonly used antihypertensive drugs. The aim of this study was to establish a robust UPLC-MS/MS method for the simultaneous determination of olmesartan medoxomil, amlodipine, and hydrochlorothiazide in dog plasma. At the same time, the in vivo and in vitro release studies were conducted, and a preliminary in vitro-in vivo correlation (IVIVC) evaluation was performed.

METHODS

The bioequivalence experiment was conducted with a double-crossed design. Three major components were extracted and analyzed by UHPLC-MS/MS. With the MRM scan, olmesartan and amlodipine were quantified by fragment conversion (m/z 447.10→190.10) and (m/z 408.95→294.00) under positive ESI mode, while hydrochlorothiazide was quantified with fragment conversion (m/z 295.90→268.90) under negative ESI mode. The in vitro release studies were performed using a USP paddle, and the dissolution medium was chosen from pH 6.0 to pH 6.8 according to the BCS classification of compounds. The IVIVC was calculated using the Wagner-Nelson equation.

RESULTS

The linear ranges of olmesartan, amlodipine, and hydrochlorothiazide in the plasma were 5.0-2500, 0.1-50, and 3.0-1500 ng/mL, respectively. All accuracies were within 3.8% of the target values, and the findings revealed that intra-day and inter-day accuracies were less than 12.1%. Moreover, the recoveries exceeded 88.3%, the matrix effect tests were positive, and the stability tests were positive. With the establishment of correlation, the distinguishable dissolution condition (pH 6.8) was selected as the predictable condition.

CONCLUSION

The established method was suitable for the preclinical pharmacokinetic study of tripartite drugs with strong specificity and high sensitivity. Through the evaluation of IVIVC, the connection between in vivo and in vitro drug testing was initially established.

A Metformin-Ferulic Acid Salt with Improved Biopharmaceutical Parameters

Though ferulic acid presents great hypoglycemic potential, it possesses limited aqueous solubility, and low oral bioavailability. When associated with metformin, the first-choice drug in Type 2 diabetes treatment, FA demonstrates synergistic hypoglycemic effects, however, it also causes certain undesirable dose-related effects. This study aimed to develop a new ferulic acid - metformin multicomponent system, and incorporate it into a solid dosage form with improved biopharmaceutical parameters. A novel metformin: ferulate (1:1) salt (MFS) was produced, which was properly characterized using differing analytical techniques, including single crystal analysis. Also during the course of the study, a new polymorph of the metformin free base was observed. The MFS was obtained using solvent evaporation methods, which achieved high yields in reproducible process, as well as a 740-fold increase in ferulic acid aqueous solubility. The MFS tablets developed met quality control requirements for this dosage form, as well as revealing excellent performance in vitro dissolution tests, presenting dissolution efficiency values of 95.4 ± 0.5%. Additionally, physicochemical instability was not observed in a study at 40 °C for 3 months for both MFS powder and its tablet form. The MFS product developed is a promising candidate for further Type 2 diabetes clinical study.

Alleviating the Influence of Circadian Rhythms and Drug Properties to the Release of Paliperidone Gel Matrix Tablets with Compression Coating Technology and Microenvironment Shaping

The influence of circadian rhythms is an important content in oral dosage form study which is shown as different pH conditions and gastrointestinal dynamics in the gastrointestinal tract. The purpose of this study was to alleviate the influence of circadian rhythms and drug properties to the release of gel matrix tablets in vitro and in vivo. In this study, the compression coating technology and microenvironment shaping were utilized to achieve the alleviation of the influence of circadian rhythms and drug properties. The compression coating technology was used to alleviate the influence of gastrointestinal dynamics, and microenvironment shaping was used to alleviate the interference of different pH condition variations. The self-made compression coating tablet could maintain a consistent release rate in different pH conditions and different dynamic environments in vitro for 24 h. In vivo, the pharmacokinetic parameters C_max and T_max were 3701.675 ng/mL and 24 h, respectively, and the release effect in vivo was similar to the paliperidone osmotic pump tablet with the ability to alleviate the influence of circadian rhythms. The correlation coefficient R² was 0.9914 for the self-made paliperidone compression coating tablet in vitro-in vivo correlation. The interference caused by circadian rhythms was alleviated so that the compression coating technology with microenvironment shaping could replace the osmotic pump technology with easier preparation process and cheaper costs in vitro and in vivo and achieve the effect of alleviating the interference of circadian rhythms.

Establishment of Level a In Vitro-In Vivo Correlation (IVIVC) via Extended DoE-IVIVC Model: A Donepezil Case Study

This study aimed to establish an extended design of experiment (DoE)-in vitro in vivo correlation (IVIVC) model that defines the relationship between formulation composition, in vitro dissolution, and in vivo pharmacokinetics. Fourteen sustained-release (SR) tablets of a model drug, donepezil, were designed by applying a mixture design of DoE and prepared by the wet granulation method. The in vitro dissolution patterns of donepezil SR tablets were described by Michaelis-Menten kinetics. The mathematical relationship describing the effects of SR tablet compositions on the in vitro dissolution parameter, i.e., the in vitro maximum rate of release (V_max), was derived. The predictability of the derived DoE model was validated by an additional five SR tablets with a mean prediction error (PE%) of less than 3.50% for in vitro V_max. The pharmacokinetics of three types of donepezil SR and the immediate-release (IR) tablets was assessed in Beagle dogs following oral administration (n = 3, each). Based on the plasma concentration-time profile, a population pharmacokinetic model was developed, and the in vivo dissolution of SR tablets, represented by in vivo V_max, was estimated. By correlating the in vitro and in vivo V_max, level A IVIVC was established. Finally, the extended DoE-IVIVC model was developed by integrating the DoE equation and IVIVC into the population pharmacokinetic model. The extended DoE-IVIVC model allowed one to predict the maximum plasma concentration (C_max) and the area under the plasma concentration-time curve (AUC) of donepezil SR tablets with PE% less than 10.30% and 5.19%, respectively, by their formulation composition as an input. The present extended DoE-IVIVC model may provide a valuable tool to predict the effect of formulation changes on in vivo pharmacokinetic behavior, leading to the more efficient development of SR formulations. The application of the present modeling approaches to develop other forms of drug formulation may be of interest for future studies.

3D-Printed Gastroretentive Sustained Release Drug Delivery System by Applying Design of Experiment Approach

This study aimed to develop a novel oral drug delivery system for gastroretentive sustained drug release by using a capsular device. A capsular device that can control drug release rates from the inner immediate release (IR) tablet while floating in the gastric fluid was fabricated and printed by a fused deposition modeling 3D printer. A commercial IR tablet of baclofen was inserted into the capsular device. The structure of the capsular device was optimized by applying a design of experiment approach to achieve sustained release of a drug while maintaining sufficient buoyancy. The 2-level factorial design was used to identify the optimal sustained release with three control factors: size, number, and height of drug-releasing holes of the capsular device. The drug delivery system was buoyant for more than 24 h and the average time to reach 80% dissolution (T₈₀) was 1.7–6.7 h by varying the control factors. The effects of the different control factors on the response factor, T₈₀, were predicted by using the equation of best fit. Finally, drug delivery systems with predetermined release rates were prepared with a mean prediction error ≤ 15.3%. This approach holds great promise to develop various controlled release drug delivery systems.

Evaluating supersaturation in vitro and predicting its performance in vivo with Biphasic gastrointestinal Simulator: A case study of a BCS IIB drug

This study aimed to develop an evaluation approach for supersaturation by employing an in vitro bio-mimicking apparatus designed to predict in vivo performance. The Biphasic Gastrointestinal Simulator (BGIS) is composed of three chambers with absorption phases that represent the stomach, duodenum, and jejunum, respectively. The concentration of apatinib in each chamber was detected by fiber optical probes in situ. The dissolution data and the pharmacokinetic data were correlated by Gastroplus^TM. The precipitates were characterized by polarizing microscope, Scanning Electron Microscopy, Powder X-ray diffraction and Differential scanning calorimetry. According to the results, Vinylpyrrolidone-vinyl acetate copolymer (CoPVP) prolonged supersaturation by improving solubility and inhibiting crystallization, while Hydroxypropyl methylcellulose (HPMC) prolonged supersaturation by inhibiting crystallization alone. Furthermore, a predictive in vitro-in vivo correlation was established, which confirmed the anti-precipitation effect of CoPVP and HPMC on in vitro performance and in vivo behavior. In conclusion, CoPVP and HPMC increased and prolonged the supersaturation of apatinib, and then improved its bioavailability. Moreover, BGIS was demonstrated to be a significant approach for simulating in vivo conditions for in vitro-in vivo correlation in a supersaturation study. This study presents a promising approach for evaluating supersaturation, screening precipitation inhibitors in vitro, and predicting their performances in vivo.

Development of a Two-Compartment System In vitro Dissolution Test and Correlation with In vivo Pharmacokinetic Studies for Celecoxib

The objective of this study was to develop a novel open-mode two-compartment system dissolution apparatus to simulate the dissolution and absorption of poorly soluble drugs and to establish an in vitro-in vivo correlation (IVIVC). Celecoxib (CEB) was selected as a model drug, and in vitro dissolution was performed using the novel dissolution apparatus with acetate buffers at pH 4.5 containing Tween 80 (0.15%, w/v), at a flow rate of 30 mL/min and an agitation rate of 50 rpm. Cumulative release of all formulations was incomplete at approximately 70-80%, which likely reflected in vivo dissolution. Corresponding pharmacokinetic studies were performed in which twelve healthy male subjects from two bioequivalence studies received either one immediate release (IR) dose of the test (test 1 or test 2) or the reference formulation (Celebrex®, 200 mg). Individual plasma profiles of the formulations were deconvoluted via the Wanger-Nelson method to obtain the mean absorption fractions. A level A correlation was successfully developed with a good R². The Weibull equation was used to describe the in vitro dissolution and in vivo absorption kinetics. In vitro dissolution correlated with in vivo absorption was applied successfully to predict the in vivo plasma concentrations-time profiles of the CEB formulations. Compared with conventional methods, the novel dissolution device showed great potential for discriminating the dissolution between formulations and generic drugs, which may provide a tool for making in vivo predictions for next bioequivalence trials.

Physiologically Relevant In Vitro-In Vivo Correlation (IVIVC) Approach for Sildenafil with Site-Dependent Dissolution

This study aimed to establish a physiologically relevant in vitro-in vivo correlation (IVIVC) model reflecting site-dependent dissolution kinetics for sildenafil based on population-pharmacokinetic (POP-PK) modeling. An immediate release (IR, 20 mg) and three sustained release (SR, 60 mg) sildenafil tablets were prepared by wet granulation method. In vitro dissolutions were determined by the paddle method at pH 1.2, 4.5, and 6.8 media. The in vivo pharmacokinetics were assessed after oral administration of the prepared IR and SR formulations to Beagle dogs (n = 12). The dissolution of sildenafil from SR formulations was incomplete at pH 6.8, which was not observed at pH 1.2 and pH 4.5. The relative bioavailability was reduced with the decrease of the dissolution rate. Moreover, secondary peaks were observed in the plasma concentration-time curves, which may result from site-dependent dissolution. Thus, a POP-PK model was developed to reflect the site-dependent dissolution by separately describing the dissolution and absorption processes, which allowed for estimation of the in vivo dissolution of sildenafil. Finally, an IVIVC was established and validated by correlating the in vitro and in vivo dissolution rates. The present approach may be applied to establish IVIVC for various drugs with complex dissolution kinetics for the development of new formulations.