Electrospun nanofibers for local anticancer therapy: Review of in vivo activity

Exploring the vast potentials and probable limitations of novel and nanostructured implantable drug delivery systems for cancer treatment

Conventional cancer chemotherapy regimens, albeit successful to some extent, suffer from some significant drawbacks, such as high-dose requirements, limited bioavailability, low therapeutic indices, emergence of multiple drug resistance, off-target distribution, and adverse effects. The main goal of developing implantable drug delivery systems (IDDS) is to address these challenges and maintain anti-cancer drugs directly at the intended sites of therapeutic action while minimizing inevitable side effects. IDDS possess numerous advantages over conventional drug delivery, including controlled drug release patterns, one-time drug administration, as well as loading and stabilizing poorly water-soluble chemotherapy drugs. Here, we summarized conventional and novel (three-dimensional (3D) printing and microfluidic) preparation techniques of different IDDS, including nanofibers, films, hydrogels, wafers, sponges, and osmotic pumps. These systems could be designed with high biocompatibility and biodegradability features using a wide variety of natural and synthetic polymers. We also reviewed the published data on these systems in cancer therapy with a particular focus on their release behavior. Various release profiles could be attained in IDDS, which enable predictable, adjustable, and sustained drug releases. Furthermore, multi-step or stimuli-responsive drug release could be obtained in these systems. The studies mentioned in this article have proven the effectiveness of IDDS for treating different cancer types with high prevalence, including breast cancer, and aggressive cancer types, such as glioblastoma and liver cancer. Additionally, the challenges in applying IDDS for efficacious cancer therapy and their potential future developments are also discussed. Considering the high potential of IDDS for further advancements, such as programmable release and degradation features, further clinical trials are needed to ensure their efficiency. The overall goal of this review is to expand our understanding of the behavior of commonly investigated IDDS and to identify the barriers that should be addressed in the pursuit of more efficient therapies for cancer. See also the graphical abstract(Fig. 1).

Co-loading of Temozolomide with Oleuropein or rutin into polylactic acid core-shell nanofiber webs inhibit glioblastoma cell by controlled release

Glioblastoma (GB) has susceptibility to post-surgical recurrence. Therefore, local treatment methods are required against recurrent GB cells in the post-surgical area. In this study, we developed a nanofiber-based local therapy against GB cells using Oleuropein (OL), and rutin and their combinations with Temozolomide (TMZ). The polylactic acid (PLA) core-shell nanofiber webs were encapsulated with OL (PLAOL), rutin (PLArutin), and TMZ (PLATMZ) by an electrospinning process. A SEM visualized the morphology and the total immersion method determined the release characteristics of PLA webs. Real-time cell tracking analysis for cell growth, dual Acridine Orange/Propidium Iodide staining for cell viability, a scratch wound healing assay for migration capacity, and a sphere formation assay for tumor spheroid aggressiveness were used. All polymeric nanofiber webs had core-shell structures with an average diameter between 133 ± 30.7-139 ± 20.5 nm. All PLA webs promoted apoptotic cell death, suppressed cell migration, and spheres growth (p < 0.0001). PLAOL and PLATMZ suppressed GB cell viability with a controlled release that increased over 120 h, while PLArutin caused rapid cell inhibition (p < 0.0001). Collectively, our findings suggest that core-shell nano-webs could be a novel and effective therapeutic tool for the controlled release of OL and TMZ against recurrent GB cells.

Personalised Medicine and the Potential Role of Electrospinning for Targeted Immunotherapeutics in Head and Neck Cancer

Advanced head and neck cancer (HNC) is functionally and aesthetically destructive, and despite significant advances in therapy, overall survival is poor, financial toxicity is high, and treatment commonly exacerbates tissue damage. Although response and durability concerns remain, antibody-based immunotherapies have heralded a paradigm shift in systemic treatment. To overcome limitations associated with antibody-based immunotherapies, exploration into de novo and repurposed small molecule immunotherapies is expanding at a rapid rate. Small molecule immunotherapies also have the capacity for chelation to biodegradable, bioadherent, electrospun scaffolds. This article focuses on the novel concept of targeted, sustained release immunotherapies and their potential to improve outcomes in poorly accessible and risk for positive margin HNC cases.

Golden Buckwheat Extract-Loaded Injectable Hydrogel for Efficient Postsurgical Prevention of Local Tumor Recurrence Caused by Residual Tumor Cells

To prevent local tumor recurrence caused by possible residual cancer cells after surgery, avoid toxicity of systemic chemotherapy and protect the fragile immune system of postsurgical patients, an increasing amount of attention has been paid to local anti-cancer drug delivery systems. In this paper, golden buckwheat was first applied to prevent post-operative tumor recurrence, which is a Chinese herb and possesses anti-tumor activity. Golden buckwheat extract-loaded gellan gum injectable hydrogels were fabricated via Ca²⁺ crosslinking for localized chemotherapy. Blank and/or drug-loaded hydrogels were characterized via FT-IR, TG, SEM, density functional theory, drug release and rheology studies to explore the interaction among gellan gum, Ca²⁺ and golden buckwheat extract (GBE). Blank hydrogels were non-toxic to NIH3T3 cells. Of significance, GBE and GBE-loaded hydrogel inhibited the proliferation of tumor cells (up to 90% inhibition rate in HepG2 cells). In vitro hemolysis assay showed that blank hydrogel and GBE-loaded hydrogel had good blood compatibility. When GBE-loaded hydrogel was applied to the incompletely resected tumor of mice bearing B16 tumor xenografts, it showed inhibition of tumor growth in vivo and induced the apoptosis of tumor cells. Taken together, gellan gum injectable hydrogel containing GBE is a potential local anticancer drug delivery system for the prevention of postsurgical tumor recurrence.

Multilayered Polyurethane/Poly(vinyl alcohol) Nanofibrous Mats for Local Topotecan Delivery as a Potential Retinoblastoma Treatment

Local chemotherapy using polymer drug delivery systems has the potential to treat some cancers, including intraocular retinoblastoma, which is difficult to treat with systemically delivered drugs. Well-designed carriers can provide the required drug concentration at the target site over a prolonged time, reduce the overall drug dose needed, and suppress severe side effects. Herein, nanofibrous carriers of the anticancer agent topotecan (TPT) with a multilayered structure composed of a TPT-loaded inner layer of poly(vinyl alcohol) (PVA) and outer covering layers of polyurethane (PUR) are proposed. Scanning electron microscopy showed homogeneous incorporation of TPT into the PVA nanofibers. HPLC-FLD proved the good loading efficiency of TPT (≥85%) with a content of the pharmacologically active lactone TPT of more than 97%. In vitro release experiments demonstrated that the PUR cover layers effectively reduced the initial burst release of hydrophilic TPT. In a 3-round experiment with human retinoblastoma cells (Y-79), TPT showed prolonged release from the sandwich-structured nanofibers compared with that from a PVA monolayer, with significantly enhanced cytotoxic effects as a result of an increase in the PUR layer thickness. The presented PUR-PVA/TPT-PUR nanofibers appear to be promising carriers of active TPT lactone that could be useful for local cancer therapy.

A Multilayer Nanofibrous Mat for the Topical Chemotherapy of the Positive Margin in Bladder Cancer

Treatment of positive margins after solid tumor resection remains a significant challenge for clinicians. Owing to unique structural features, electrospun nanofibrous mats are promised to be an implantable antitumor system through the delivery of active agents in a controlled manner. In this study, we utilized sequential electrospinning to fabricate a multilayer mat in which gemcitabine (GEM) and cisplatin (CDDP) were electrospun individually in distinct layers. By designing the structure, the multilayer mat could deliver antitumor agents sustainedly and prolong the release of GEM, which is loaded in the inner layer. In vitro assays show that the multilayer mats effectively inhibit bladder cancer (BC) cells and elevate apoptosis. In animal models of BC, the implantable drug-loaded fibrous mat can effectively treat positive margins and prevent local recurrence. Moreover, the local delivery of GEM and CDDP significantly lowers liver toxicity compared with systemic chemotherapy. In summary, a multilayer nanofibrous mat is developed for the localized and controlled delivery of GEM, dramatically improving the treatment of residual tumors and preventing BC recurrence. Impact statement The designed multilayer nanofibrous mats can achieve two chemotherapeutic drugs (gemcitabine and cisplatin) co-loading and time-programmed sustained release, significantly improving our previous study. The antitumor effect of the drug-loaded mat in vivo and in vitro was sufficiently demonstrated. We expect to bring a new strategy of topical chemotherapy for treating positive surgical margins in bladder cancer.

Enhanced postoperative cancer therapy by iron-based hydrogels

Surgical resection is a widely used method for the treatment of solid tumor cancers. However, the inhibition of tumor recurrence and metastasis are the main challenges of postoperative tumor therapy. Traditional intravenous or oral administration have poor chemotherapeutics bioavailability and undesirable systemic toxicity. Polymeric hydrogels with a three-dimensional network structure enable on-site delivery and controlled release of therapeutic drugs with reduced systemic toxicity and have been widely developed for postoperative adjuvant tumor therapy. Among them, because of the simple synthesis, good biocompatibility, biodegradability, injectability, and multifunctionality, iron-based hydrogels have received extensive attention. This review has summarized the general synthesis methods and construction principles of iron-based hydrogels, highlighted the latest progress of iron-based hydrogels in postoperative tumor therapy, including chemotherapy, photothermal therapy, photodynamic therapy, chemo-dynamic therapy, and magnetothermal-chemical combined therapy, etc. In addition, the challenges towards clinical application of iron-based hydrogels have also been discussed. This review is expected to show researchers broad perspectives of novel postoperative tumor therapy strategy and provide new ideas in the design and application of novel iron-based hydrogels to advance this sub field in cancer nanomedicine.

Drug Delivery Systems for Photodynamic Therapy: The Potentiality and Versatility of Electrospun Nanofibers

Recently, photodynamic therapy (PDT) has become a promising approach for the treatment of a broad range of diseases, including oncological and infectious diseases. This minimally invasive and localized therapy is based on the production of reactive oxygen species (ROS) able to destroy cancer cells and inactivate pathogens by combining the use of photosensitizers (PSs), light and molecular oxygen. To overcome the drawbacks of drug systemic administration, drug delivery systems (DDS) can be used to carrier the PSs, allowing higher therapeutic efficacy and minimal toxicological effects. Polymeric nanofibers produced by electrospinning emerged as powerful platforms for drug delivery applications. Electrospun nanofibers exhibit outstanding characteristics, such as large surface area to volume ratio associated with high drug loading, high porosity, flexibility, ability to incorporate and release a wide variety of therapeutic agents, biocompatibility and biodegradability. Due to the versatility of this technique, fibers with different morphologies and functionalities, including drug release profile can be produced. The possibility of scalability makes electrospinning even more attractive for the development of DDS. This review aims to explore and show an up to date of the huge potential of electrospun nanofibers as DDS for different PDT applications and discuss the opportunities and challenges in this field. This article is protected by copyright. All rights reserved.

Hyperspectral microscopy of subcutaneously released silver nanoparticles reveals sex differences in drug distribution

Biomaterials have a great potential to improve human health, however in vitro and in vivo studies are necessary to provide information on their efficacy and safety. This study reports on a comprehensive evaluation of core-shell electrospun fibers loaded with silver nanoparticles (Ag NP) where the delivery rate was controlled by different sizes of Ag NP and thermoresponsive poly(n-isopropylacrylamide) (PNIPAM) hydrogel particles. Fiber meshes also contain zinc oxide nanoparticles (ZnO NP), to improve pore structure for controlled release of Ag NP. In vitro cytotoxicity studies using cultured human A549 epithelial cells demonstrated that the ZnO NP component, which is known to cause cytotoxicity, of the fiber meshes did cause measurable cell death. In vitro antibacterial efficacy of the fiber meshes was shown with rapid and efficient growth inhibition in E. coli bacterial culture. Fiber meshes were implanted subcutaneously for up to 27 days in male and female C57BL/6 mice to evaluate the in vivo drug release and biocompatibility. Hyperspectral microscopy was used as an advanced tool to determine precise location of released Ag NP into the skin compared to the conventional tissue staining methods. Results suggested that Ag NP were continuously released over 27 days of implantation in mice. Hyperspectral imaging revealed that released Ag NP dispersed in the dermis of male mice, however, Ag NP accumulated in the hair follicles of female mice (Figure). Mice implanted with fiber meshes containing ZnO NP had better hair regrowth and wound healing, which was in contrast to in vitro cytotoxicity results. These findings suggest that these newly developed fiber meshes can have unique long-term release of drugs loaded in the fiber core and appear to be biocompatible. The differences in the sex-bias outcome suggest the opportunity for development of sex-specific drug delivery systems.

Nanoformulations of α-Mangostin for Cancer Drug Delivery System

Natural compounds are emerging as effective agents for the treatment of malignant diseases. The active constituent of α-mangostin from the pericarp of Garcinia mangostana L. has earned significant interest as a plant base compound with anticancer properties. Despite α-mangostin's superior properties as an anticancer agent, its applications are limited due to its poor solubility and physicochemical stability, rapid systemic clearance, and low cellular uptake. Our review aimed to summarize and discuss the nanoparticle formulations of α-mangostin for cancer drug delivery systems from published papers recorded in Scopus, PubMed, and Google Scholar. We investigated various types of α-mangostin nanoformulations to improve its anticancer efficacy by improving bioavailability, cellular uptake, and localization to specific areas These nanoformulations include nanofibers, lipid carrier nanostructures, solid lipid nanoparticles, polymeric nanoparticles, nanomicelles, liposomes, and gold nanoparticles. Notably, polymeric nanoparticles and nanomicelles can increase the accumulation of α-mangostin into tumors and inhibit tumor growth in vivo. In addition, polymeric nanoparticles with the addition of target ligands can increase the cellular uptake of α-mangostin. In conclusion, nanoformulations of α-mangostin are a promising tool to enhance the cellular uptake, accumulation in cancer cells, and the efficacy of α-mangostin as a candidate for anticancer drugs.

Recent advances in polymer scaffolds for biomedical applications

The review provides insights into current advancements in electrospinning-assisted manufacturing for optimally designing biomedical devices for their prospective applications in tissue engineering, wound healing, drug delivery, sensing, and enzyme immobilization, and others. Further, the evolution of electrospinning-based hybrid biomedical devices using a combined approach of 3 D printing and/or film casting/molding, to design dimensionally stable membranes/micro-nanofibrous assemblies/patches/porous surfaces, etc. is reported. The influence of various electrospinning parameters, polymeric material, testing environment, and other allied factors on the morphological and physico-mechanical properties of electrospun (nano-/micro-fibrous) mats (EMs) and fibrous assemblies have been compiled and critically discussed. The spectrum of operational research and statistical approaches that are now being adopted for efficient optimization of electrospinning process parameters so as to obtain the desired response (physical and structural attributes) has prospectively been looked into. Further, the present review summarizes some current limitations and future perspectives for modeling architecturally novel hybrid 3 D/selectively textured structural assemblies, such as biocompatible, non-toxic, and bioresorbable mats/scaffolds/membranes/patches with apt mechanical stability, as biological substrates for various regenerative and non-regenerative therapeutic devices.

5FU-loaded PCL/Chitosan/Fe3O4 Core-Shell Nanofibers Structure: An Approach to Multi-Mode Anticancer System

Purpose: 5FU and Fe3O4 nanoparticles were encapsulated in core-shell Polycaprolactone/Chitosan nanofibers as a multi-mode anticancer system to study drug release sustainability. The structure of the core-shell drug delivery system was also optimized according to drug release behavior by artificial intelligence. Methods: The core-shell nanofibers were electrospun by a coaxial syringe. ANN was used for function approximation to estimate release parameters. A genetic algorithm was then used for optimizing the structure. Chemical assay of the optimized sample was performed by FTIR, XRD, and EDX. VSM test was conducted to measure the real amount of loaded magnetic nanoparticles. HepG2 cell cytotoxicity was studied and the results for the optimized samples with and without Fe3O4 after 72hrs were reported. Results: Feeding ratio of sheath to core and the amount of CS, Fe3O4, and 5FU had a statistical effect on nanofibers diameters, which were 300-450nm. The drug loading efficiency of these nanofibers was 65-86%. ANN estimated the release parameters with an error of 10%. The temperature increased about 5.6°C in the AMF of 216kA.m-1~300kHz and 4.8°C in the AMF of 154kA.m-1~400kHz after 20min. HepG2 cell cytotoxicity for the optimized samples with and without Fe3O4 after 72hrs were 39.7% and 38.8%, respectively. Conclusion: Since this core-shell drug release system was more sustainable compared to the blend structure despite the low half-life of 5FU, it is suggested to utilize it as post-surgical implants for various cancer treatments such as liver or colorectal cancer in the future. This system is capable of providing chemotherapy and hyperthermia simultaneously.

Co-loading of doxorubicin and iron oxide nanocubes in polycaprolactone fibers for combining Magneto-Thermal and chemotherapeutic effects on cancer cells

Among the strategies to fight cancer, multi-therapeutic approaches are considered as a wise choice to put in place multiple weapons to suppress tumors. In this work, to combine chemotherapeutic effects to magnetic hyperthermia when using biocompatible scaffolds, we have established an electrospinning method to produce nanofibers of polycaprolactone loaded with magnetic nanoparticles as heat mediators to be selectively activated under alternating magnetic field and doxorubicin as a chemotherapeutic drug. Production of the fibers was investigated with iron oxide nanoparticles of peculiar cubic shape (at 15 and 23 nm in cube edges) as they provide benchmark heat performance under clinical magnetic hyperthermia conditions. With 23 nm nanocubes when included into the fibers, an arrangement in chains was obtained. This linear configuration of magnetic nanoparticles resemble that of the magnetosomes, produced by magnetotactic bacteria, and our magnetic fibers exhibited remarkable heating effects as the magnetosomes. Magnetic fiber scaffolds showed excellent biocompatibility on fibroblast cells when missing the chemotherapeutic agent and when not exposed to magnetic hyperthermia as shown by viability assays. On the contrary, the fibers containing both magnetic nanocubes and doxorubicin showed significant cytotoxic effects on cervical cancer cells following the exposure to magnetic hyperthermia. Notably, these tests were conducted at magnetic hyperthermia field conditions of clinical use. As here shown, on the doxorubicin sensitive cervical cancer cells, the combination of heat damage by magnetic hyperthermia with enhanced diffusion of doxorubicin at therapeutic temperature are responsible for a more effective oncotherapy.

8-Hydroxyquinoline-5-Sulfonic Acid-Containing Poly(Vinyl Alcohol)/Chitosan Electrospun Materials and Their Cu2+ and Fe3+ Complexes: Preparation, Antibacterial, Antifungal and Antitumor Activities

Novel poly(vinyl alcohol) (PVA)/chitosan (Ch)-based fibrous materials containing an ionizable model drug, 8-hydroxyquinoline-5-sulfonic acid (SQ), were successfully fabricated by electrospinning. Complexes between the components of the crosslinked PVA/Ch/SQ mats and Cu2+ and Fe3+ ions were formed. The coordination of these ions in the mats was examined by electron paramagnetic resonance spectroscopy (EPR). The microbiological screening against S. aureus and C. albicans revealed that both the incorporation of SQ in the mats and the complexation with Cu2+ and Fe3+ imparted to these materials antibacterial and antifungal activities. Moreover, the SQ-containing mats and their complexes displayed good cytotoxicity against human cervical HeLa tumor cells. The most prominent was the cytotoxicity of the Cu2+ complex of the mats. The combined antibacterial, antifungal and in vitro antitumor activities render these novel materials promising candidates for wound dressing applications and for application in the local treatment of cervical tumors.

Nanomaterials for the Diagnosis and Treatment of Head and Neck Cancers: A Review

Head and neck cancer (HNC) is a category of cancers that typically arise from the nose-, mouth-, and throat-lining squamous cells. The later stage of HNC diagnosis significantly affects the patient's survival rate. This makes it mandatory to diagnose this cancer with a suitable biomarker and imaging techniques at the earlier stages of growth. There are limitations to traditional technologies for early detection of HNC. Furthermore, the use of nanocarriers for delivering chemo-, radio-, and phototherapeutic drugs represents a promising approach for improving the outcome of HNC treatments. Several studies with nanostructures focus on the development of a targeted and sustained release of anticancer molecules with reduced side effects. Besides, nanovehicles could allow co-delivering of anticancer drugs for synergistic activity to counteract chemo- or radioresistance. Additionally, a new generation of smart nanomaterials with stimuli-responsive properties have been developed to distinguish between unique tumor conditions and healthy tissue. In this light, the present article reviews the mechanisms used by different nanostructures (metallic and metal oxide nanoparticles, polymeric nanoparticles, quantum dots, liposomes, nanomicelles, etc.) to improve cancer diagnosis and treatment, provides an up-to-date picture of the state of the art in this field, and highlights the major challenges for future improvements.

Electrospinning for drug delivery applications: A review

Drug delivery devices are promising tools in the pharmaceutical field, as they are able to maximize the therapeutic effects of the delivered drug while minimizing the undesired side effects. In the past years, electrospun nanofibers attracted rising attention due to their unique features, like biocompatibility and broad flexibility. Incorporation of active principles in nanofibrous meshes proved to be an efficient method for in situ delivery of a wide range of drugs, expanding the possibility and applicability of those devices. In this review, the principle of electrospinning and different fields of applications are treated to give an overview of the recent literature, underlining the easy tuning and endless combination of this technique, that in the future could be the new frontier of personalized medicine.

An investigation of factors affecting the electrospinning of poly (vinyl alcohol)/kefiran composite nanofibers

This study aimed to investigate parameters affecting the electrospinning of poly (vinyl alcohol) (PVA)/kefiran composite nanofibers. Accordingly, PVA/kefiran composite nanofibers were produced using the electrospinning of PVA, kefiran blend solutions under various electrospinning parameters (such as applied voltage, nozzle-to-collector distance, and polymer injection rate), and solution parameters (such as the ratio of polymers). PVA and kefiran solutions were prepared in 8% and 6% w/w, respectively. Kefiran was blended with PVA solution in different proportions: 70:30, 60:40, 50:50, 40:60, and 30:70. According to the scanning electron microscope (SEM) images, kefiran mixed with PVA in 40:60 ratios produced the best result in nanofiber production. Then, device parameters such as voltage (12, 15, 18, and 20 kV), distance (120, 150, 170, and 200 mm), and polymer injection rates (1, 1.5, 2, and 2.5 mL/h) were changed. The investigation of SEM images showed that the optimal condition for the fabrication of nanofibers was 18 kV, 200 mm, and 1 mL/h. The nanofibers produced in the optimal condition were uniform without knots or adhesion in a small diameter. It was also found that concentration can be regarded as the most effective parameter affecting the diameter of nanofibers. Moreover, the transmission electron microscopy (TEM) image proved that phase separation did not occur between the two polymers.

GRAPHICAL ABSTRACT

Kefiran biopolymer extracted from fermented milk was used in fabrication of PVA/kefiran composite nanofibers using the electrospinning method.

Electrospun nanofibers in cancer research: from engineering of in vitro 3D cancer models to therapy

Electrospinning is historically related to tissue engineering due to its ability to produce nano-/microscale fibrous materials with mechanical and functional properties that are extremely similar to those of the extracellular matrix of living tissues. The general interest in electrospun fibrous matrices has recently expanded to cancer research both as scaffolds for in vitro cancer modelling and as patches for in vivo therapeutic delivery. In this review, we examine electrospinning by providing a brief description of the process and overview of most materials used in this process, discussing the effect of changing the process parameters on fiber conformations and assemblies. Then, we describe two different applications of electrospinning in service of cancer research: firstly, as three-dimensional (3D) fibrous materials for generating in vitro pre-clinical cancer models; and secondly, as patches encapsulating anticancer agents for in vivo delivery.

Double stimuli-responsive cellulose nanocrystals reinforced electrospun PHBV composites membrane for intelligent drug release

Double stimuli-responsive functionalized cellulose nanocrystal-poly[2-(dimethylamino)ethyl methacrylate] (CNC-g-PDMAEMA) reinforced poly(3-hydroxybutyrate-co-3-hydroxy valerate) (PHBV) electrospun composite membranes were explored as drug delivery vehicles using tetracycline hydrochloride (TH) as a model drug. It was found that rigid CNC-g-PDMAEMA nanoparticles enhanced thermal, crystallization and hydrophilic properties of PHBV. Moreover, great improvements in fiber diameter uniformity, crystallization ability and maximum decomposition temperature (T_max) could be achieved at 6 wt% CNC-g-PDMAEMA. Furthermore, by introducing stimuli-responsive CNC-g-PDMAEMA nanofillers, intelligent and long-term sustained release behavior of composite membranes could be achieved. The releasing mechanism of composite membranes based on zero order, first order, Higuchi and Korsmeyere-Peppas mathematical models was clearly demonstrated, giving effective technical guidance for practical drug delivery systems.

Zinc sulfide nanoparticle-decorated fibre mesh to enable localized H2S-amplified chemotherapy

For the first time, we report the design and fabrication of a ZnS nanoparticle-decorated silica fibre mesh (ZnS@SiO₂) for localized H₂S-amplified chemotherapy. With incorporation of DOX, implanted ZnS@SiO₂ fibres enable sufficient on-site drug dosage and intracellular H₂S content, inducing significant in vitro and in vivo tumour inhibition.

Controlled curcumin release from nanofibers based on amphiphilic-block segmented polyurethanes

A series of biodegradable amphiphilic-block segmented polyurethanes (SPUs) are designed and synthesized based on di-block and tri-block macrodiols of polycaprolactone (PCL) and polyethylene glycol (PEG). Curcumin, as a model herbal antibacterial agent, is used due to its effective inhibitory action against Gram-positive and Gram-negative bacteria. Curcumin-loaded nanofibers, with 400-900 nm diameter range, have been prepared by electrospinning of SPUs. The synthesized SPUs can be used for wound dressing applications due to their excellent mechanical properties and higher hydrophilicity in comparison to PCL-based polyurethane. The elongation-at-break of tri-block SPU with PEG-PCL-PEG soft segments is 350% when produced as an electrospun mat and that for film is 1500%. In vitro release of curcumin, examined by UV-Vis spectroscopy, shows a steady release during 18 days. The inclusion of PEG chains in the soft segment increases the hydrophilicity and biodegradation rate of the electrospun mats compared to a PCL-based polyurethane, which eventually results in a higher curcumin release rate. The antibacterial activity of 50 mg of 10% curcumin-loaded SPU nanofibers is about 100% and 93% against Escherichia coli (E. coli ATCC: 25922) and Staphylococcus aureus (S. aureus ATCC: 6538), respectively. Nontoxic behavior of the scaffolds is evaluated through MTT assay against L929 mouse fibroblast cells. The results show that the synthesized SPUs can be used as a nanoscale sustained release carrier. The SPU with PEG-PCL-PEG soft segments is an excellent candidate for wound dressing in tissues undergoing large deformations during normal activities.

Electrospun oral formulations for combined photo-chemotherapy of colon cancer

In this work, we report new formulations for the combined photo-chemotherapy of colon cancer. Fibers were fabricated via coaxial-electrospinning with the intent of targeting delivery of the anti-cancer drug carmofur (CAR) and the photosensitizer rose bengal (RB) selectively to the colon site. The fibers comprised a hydroxypropyl methylcellulose (HPMC) core loaded with the active ingredients, and a pH-sensitive Eudragit L100-55 shell. The fibers were found to be homogeneous and cylindrical and have visible core-shell structures. X-ray diffraction and differential scanning calorimetry demonstrated that both CAR and RB were present in the fibers in the amorphous physical form. In vitro drug release studies showed that the fibers have the potential to selectively deliver drugs to the colon, with only 10-15 % release noted in the acidic conditions of the stomach but sustained release at pH 7.4. Cytotoxicity studies were undertaken on human dermal fibroblast (HDF) and colon cancer (Caco-2) cells, and the influence of light on cell death was also explored. The fibers loaded with CAR alone showed obvious toxicity to both cell lines, with and without the application of light. The RB-loaded fibers led to high viability (ca. 80% for both cell types) in the absence of light, but much greater toxicity was noted (30-50%) with light. The same trends were observed with the formulation containing both CAR and RB, but with lower viabilities. The RB and RB/CAR loaded systems show clear selectivity for cancerous over non-cancerous cells. Finally, mucoadhesion studies revealed there were strong adhesive forces between the rat colonic mucosa and the fibers after they had passed through an acidic environment. Such electrospun fibers thus could have potential in the development of oral therapies for colon cancer.

Electrospun fibers and their application in drug controlled release, biological dressings, tissue repair, and enzyme immobilization

Electrospinning is a method of preparing microfibers or nanofibers by using an electrostatic force to stretch the electrospinning fluid. Electrospinning has gained considerable attention in many fields due to its ability to produce continuous fibers from a variety of polymers and composites in a simple way. Electrospun nanofibers have many merits such as diverse chemical composition, easily adjustable structure, adjustable diameter, high surface area, high porosity, and good pore connectivity, which give them broad application prospects in the biomedical field. This review systematically introduced the factors influencing electrospinning, the types of electrospun fibers, the types of electrospinning, and the detailed applications of electrospun fibers in controlled drug release, biological dressings, tissue repair and enzyme immobilization fields. The latest progress of using electrospun fibers in these fields was summarized, and the main challenges to be solved in electrospinning technology were put forward.

Indocyanine green based fluorescent polymeric nanoprobes for in vitro imaging

Indocyanine green (ICG) provides an advantage in the imaging of deep tumors as it can reach deeper location without being absorbed in the upper layers of biological tissues in the wavelengths, which named "therapeutic window" in the tissue engineering. Unfortunately, rapid elimination and short-term stability in aqueous media limited its use as a fluorescence probe for the early detection of cancerous tissue. In this study, stabilization of ICG was performed by encapsulating ICG molecules into the biodegradable polymer composited with poly(l-lactic acid) and poly(ε-caprolactone) via a simple one-step multiaxial electrospinning method. Different types of coaxial and triaxial structure groups were performed and compared with single polymer only groups. Confocal microscopy was used to image the encapsulated ICG (1 mg/mL) within electrospun nanofibers and in vitro ICG uptake by MIA PaCa-2 pancreatic cancer cells. Stability of encapsulated ICG is demonstrated by the in vitro sustainable release profile in PBS (pH = 4 and 7) up to 21 days. These results suggest the potential of the ability of internalization and accommodation of ICG into the pancreatic cell cytoplasm from in vitro implanted ICG-encapsulated multiaxial nanofiber mats. ICG-encapsulated multilayer nanofibers may be promising for the local sustained delivery system to eliminate loss of dosage caused by direct injection of ICG-loaded nanoparticles in systemic administration.