A review on 5-aminosalicylic acid colon-targeted oral drug delivery systems

Preparation and Evaluation of Berberine-Excipient Complexes in Enhancing the Dissolution Rate of Berberine Incorporated into Pellet Formulations

Berberine is used in the treatment of metabolic syndrome and its low solubility and very poor oral bioavailability of berberine was one of the primary hurdles for its market approval. This study aimed to improve the solubility and bioavailability of berberine by preparing pellet formulations containing drug-excipient complex (obtained by solid dispersion). Berberine-excipient solid dispersion complexes were obtained with different ratios by the solvent evaporation method. The maximum saturation solubility test was performed as a key factor for choosing the optimal complex for the drug-excipient. The properties of these complexes were investigated by FTIR, DSC, XRD and dissolution tests. The obtained pellets were evaluated and compared in terms of pelletization efficiency, particle size, mechanical strength, sphericity and drug release profile in simulated media of gastric and intestine. Solid-state analysis showed complex formation between the drug and excipients used in solid dispersion. The optimal berberine-phospholipid complex showed a 2-fold increase and the optimal berberine-gelucire and berberine-citric acid complexes showed more than a 3-fold increase in the solubility of berberine compared to pure berberine powder. The evaluation of pellets from each of the optimal complexes showed that the rate and amount of drug released from all pellet formulations in the simulated gastric medium were significantly lower than in the intestine medium. The results of this study showed that the use of berberine-citric acid or berberine-gelucire complex could be considered a promising technique to increase the saturation solubility and improve the release characteristics of berberine from the pellet formulation.

pH-Sensitive Hydrogels Fabricated with Hyaluronic Acid as a Polymer for Site-Specific Delivery of Mesalamine

Hydrogels with the main objective of releasing mesalamine (5-aminosalicylic acid) in the colon in a modified manner were formulated in the present work using a free-radical polymerization approach. Different ratios of hyaluronic acid were cross-linked with methacrylic and acrylic acids using methylenebis(acrylamide). The development of a new polymeric network and the successful loading of drug were revealed by Fourier transform infrared spectroscopy. Thermogravimetric analysis demonstrated that the hydrogel was more thermally stable than the pure polymer and drug. Scanning electron microscopy (SEM) revealed a rough and hard surface which was relatively suitable for efficient loading of drug and significant penetration of dissolution medium inside the polymeric system. Studies on swelling and drug release were conducted at 37 °C in acidic and basic conditions (pH 1.2, 4.5, 6.8, and 7.4, respectively). Significant swelling and drug release occurred at pH 7.4. Swelling, drug loading, drug release, and gel fraction of the hydrogels increased with increasing hyaluronic acid, methacrylic acid, and acrylic acid concentrations, while the sol fraction decreased. Results obtained from the toxicity study proved the formulated system to be safe for biological systems. The pH-sensitive hydrogels have the potential to be beneficial for colon targeting due to their pH sensitivity and biodegradability. Inflammatory bowel disease may respond better to hydrogel treatment as compared to conventional dosage forms. Specific amount of drug is released from hydrogels at specific intervals to maintain its therapeutic concentration at the required level.

Nanomedicine for colon-targeted drug delivery: strategies focusing on inflammatory bowel disease and colon cancer

The nanostructured drug-delivery systems for colon-targeted drug delivery are a promising field of research for localized diseases particularly influencing the colonic region, in other words, ulcerative colitis, Crohn's disease, and colorectal cancer. There are various drug-delivery approaches designed for effective colonic disease treatment, including stimulus-based formulations (enzyme-triggered systems, pH-sensitive systems) and magnetically driven drug-delivery systems. In addition, targeted drug delivery by means of overexpressed receptors also offers site specificity and reduces drug resistance. It also covers GI tract-triggered emulsifying systems, nontoxic plant-derived nanoformulations as advanced drug-delivery techniques as well as nanotechnology-based clinical trials toward colonic diseases. This review gives insight into advancements in colon-targeted drug delivery to meet site specificity or targeted drug-delivery requirements.

High-yield fabrication of monodisperse multilayer nanofibrous microparticles for advanced oral drug delivery applications

Recent advances in the use of nano- and microparticles in drug delivery, cell therapy, and tissue engineering have led to increasing attention towards nanostructured microparticulate formulations for maximum benefit from both nano- and micron sized features. Scalable manufacturing of monodisperse nanostructured microparticles with tunable size, shape, content, and release rate remains a big challenge. Current technology, mainly comprises complex multi-step chemical procedures with limited control over these aspects. Here, we demonstrate a novel technique for high-yield fabrication of monodisperse monolayer and multilayer nanofibrous microparticles (MoNami and MuNaMi respectively). The fabrication procedure includes sequential electrospinning followed by micro-cutting at room temperature and transfer of particles for collection. The big advantage of the introduced technique is the potential to apply several polymer-drug combinations forming multilayer microparticles enjoying extracellular matrix (ECM)-mimicking architecture with tunable release profile. We demonstrate the fabrication and study the factors affecting the final three-dimensional structure. A model drug is encapsulated into a three-layer sheet (PLGA-pullulan-PLGA), and we demonstrate how the release profile changes from burst to sustain by simply cutting particles out of the electrospun sheet. We believe our fabrication method offers a unique and facile platform for realizing advanced microparticles for oral drug delivery applications.

Electroanalytical Overview: The Sensing of Mesalamine (5-Aminosalicylic Acid)

Mesalamine, known as 5-aminosalicylic acid, is a medication used primarily in the treatment of inflammatory bowel disease, including ulcerative colitis and Crohn's disease. 5-Aminosalicylic acid can be measured using various benchtop laboratory techniques which involve liquid chromatography-mass spectroscopy, but these are sophisticated and large, meaning that they cannot be used on-site because transportation of the samples, chemicals, and physical and biological reactions can potentially occur, which can affect the sample's composition and potentially result in inaccurate results. An alternative approach is the use of electrochemical based sensing platforms which has the advantages of portability, cost-efficiency, facile miniaturization, and rapid analysis while nonetheless providing sensitivity and selectivity. We provide an overview of the use of the electroanalytical techniques for the sensing of 5-aminosalicylic acid and compare them to other laboratory-based measurements. The applications, challenges faced, and future opportunities for electroanalytical based sensing platforms are presented in this review.

Responsive nanosystems for targeted therapy of ulcerative colitis: Current practices and future perspectives

The pharmacological approach to treating gastrointestinal diseases is suffering from various challenges. Among such gastrointestinal diseases, ulcerative colitis manifests inflammation at the colon site specifically. Patients suffering from ulcerative colitis notably exhibit thin mucus layers that offer increased permeability for the attacking pathogens. In the majority of ulcerative colitis patients, the conventional treatment options fail in controlling the symptoms of the disease leading to distressing effects on the quality of life. Such a scenario is due to the failure of conventional therapies to target the loaded moiety into specific diseased sites in the colon. Targeted carriers are needed to address this issue and enhance the drug effects. Conventional nanocarriers are mostly readily cleared and have nonspecific targeting. To accumulate the desired concentration of the therapeutic candidates at the inflamed area of the colon, smart nanomaterials with responsive nature have been explored recently that include pH responsive, reactive oxygen species responsive (ROS), enzyme responsive and thermo - responsive smart nanocarrier systems. The formulation of such responsive smart nanocarriers from nanotechnology scaffolds has resulted in the selective release of therapeutic drugs, avoiding systemic absorption and limiting the undesired delivery of targeting drugs into healthy tissues. Recent advancements in the field of responsive nanocarrier systems have resulted in the fabrication of multi-responsive systems i.e. dual responsive nanocarriers and derivitization that has increased the biological tissues and smart nanocarrier's interaction. In addition, it has also led to efficient targeting and significant cellular uptake of the therapeutic moieties. Herein, we have highlighted the latest status of the responsive nanocarrier drug delivery system, its applications for on-demand delivery of drug candidates for ulcerative colitis, and the prospects are underpinned.

Development of 3D-Printed Bicompartmental Devices by Dual-Nozzle Fused Deposition Modeling (FDM) for Colon-Specific Drug Delivery

Dual-nozzle fused deposition modeling (FDM) is a 3D printing technique that allows for the simultaneous printing of two polymeric filaments and the design of complex geometries. Hence, hybrid formulations and structurally different sections can be combined into the same dosage form to achieve customized drug release kinetics. The objective of this study was to develop a novel bicompartmental device by dual-nozzle FDM for colon-specific drug delivery. Hydroxypropylmethylcellulose acetate succinate (HPMCAS) and polyvinyl alcohol (PVA) were selected as matrix-forming polymers of the outer pH-dependent and the inner water-soluble compartments, respectively. 5-Aminosalicylic acid (5-ASA) was selected as the model drug. Drug-free HPMCAS and drug-loaded PVA filaments suitable for FDM were extruded, and their properties were assessed by thermal, X-ray diffraction, microscopy, and texture analysis techniques. 5-ASA (20% w/w) remained mostly crystalline in the PVA matrix. Filaments were successfully printed into bicompartmental devices combining an outer cylindrical compartment and an inner spiral-shaped compartment that communicates with the external media through an opening. Scanning electron microscopy and X-ray tomography analysis were performed to guarantee the quality of the 3D-printed devices. In vitro drug release tests demonstrated a pH-responsive biphasic release pattern: a slow and sustained release period (pH values of 1.2 and 6.8) controlled by drug diffusion followed by a faster drug release phase (pH 7.4) governed by polymer relaxation/erosion. Overall, this research demonstrates the feasibility of the dual-nozzle FDM technique to obtain an innovative 3D-printed bicompartmental device for targeting 5-ASA to the colon.

Alginate-based drug carrier systems to target inflammatory bowel disease: A review

Inflammatory bowel disease (IBD) is an inflammatory disorder that affects the gastrointestinal tract. IBD has become an increasingly common condition in both developed and developing nations over the last few decades, owing to a variety of factors like a rising population and diets packed with processed and junk foods. While the root pathophysiology of IBD is unknown, treatments are focused on medications aimed to mitigate symptoms. Alginate (AG), a marine-derived polysaccharide, is extensively studied for its biocompatibility, pH sensitivity, and crosslinking nature. This polymer is thoroughly researched in drug delivery systems for IBD treatment, as it is naturally available, non-toxic, cost effective, and can be easily and safely cross-linked with other polymers to form an interconnected network, which helps in controlling the release of drugs over an extended period. There are various types of drug delivery systems developed from AG to deliver therapeutic agents; among them, nanotechnology-based systems and hydrogels are popular due to their ability to facilitate targeted drug delivery, reduce dosage, and increase the therapeutic efficiency. AG-based carrier systems are not only used for the sustained release of drug, but also used in the delivery of siRNA, interleukins, and stem cells for site directed drug delivery and tissue regenerating ability respectively. This review is focussed on pathogenesis and currently studied medications for IBD, AG-based drug delivery systems and their properties for the alleviation of IBD. Moreover, future challenges are also be discoursed to improve the research of AG in the field of biopharmaceuticals and drug delivery.

Characterization of sulfasalazine-bovine serum albumin and human serum albumin interaction by spectroscopic and theoretical approach

The interaction of sulfasalazine (SZ) with the carrier proteins bovine serum albumin (BSA) and human serum albumin (HSA) was explored by fluorescence, absorption and circular dichroism (CD) spectroscopy along within silicotechniques. The spectral alteration observed in fluorescence, absorption and CD spectra upon the addition of SZ confirmed the complex formation of SZ with BSA and HSA. The inverse temperature dependence behaviour of theK_svvalues as well as the increase in the protein's absorption signals after the addition of SZ indicate that SZ triggered quenching of BSA/HSA fluorescence as the static quenching. The binding affinity (k_b) of the order of 10⁶ M^-1 was reported towards the BSA-SZ and HSA-SZ association process. Interpretation of thermodynamic data (enthalpy change = -93.85 kJ mol^-1and entropy change = -200.81 J mol^-1K^-1for BSA-SZ system; enthalpy change = -74.12 kJ mol^-1and entropy change = -123.90 J mol^-1K^-1for HSA-SZ system) anticipated that hydrogen bond and van der Waals forces were the main intermolecular forces in the complex stabilization. Inclusion of SZ to BSA/HSA produced microenvironmental perturbations around Tyr and Trp residues. The UV, synchronous and 3D analysis confirmed the structural alteration of proteins after SZ binding, which was supported by CD results. The binding location of SZ in BSA/HSA was detected in Sudlow's site I (subdomain IIA) and the same was revealed by competitive site-marker displacement investigations. Density functional theory study was done to comprehend the feasibility of the analysis and to optimize the structure and energy gap that validated the experimental results. This study is expected to provide deep information about the pharmacology of SZ with its pharmacokinetic properties.

Comparison of 5-ASA layered or matrix pellets coated with a combination of ethylcellulose and Eudragits L and S in the treatment of ulcerative colitis in rats

The aim of this study was to evaluate and optimize the combination of time and pH-dependent polymers as a single coating for the design of the colon-specific drug delivery system of 5-aminosalicylic acid (5-ASA) pellets. 5-ASA matrix pellets with a 70% drug load were prepared by the extrusion-spheronization method. The optimal coating formula which included Eudragit S (ES)+Eudragit L (EL)+Ethylcellulose (EC) was predicted for the targeted drug delivery to the colonic area by a 3² factorial design. The ratio of ES:EL:EC and coating level were considered as independent variables while the responses were the release of less than 10% of the drug within 2 h (Y₁), the release of 60-70% within 10 h at pH 6.8 (Y₂) and lag time of less than 1 h at pH 7.2 (Y₃). Also, 5-ASA layered pellets were prepared by the powder layering of 5-ASA on nonpareils (0.4-0.6 mm) in a fluidized bed coater and then coated with the same optimum coating composition. The coated 5-ASA layered or matrix pellets were tested in a rat model of ulcerative colitis (UC) and compared with the commercial form of 5-ASA pellets (Pentasa®). The ratio of ES:EL:EC of 33:52:15 w/w at a coating level of 7% was discovered as the optimum coating for the delivery of 5-ASA matrix pellets to the colon. The coated 5-ASA pellets were spherical with uniform coating as shown by SEM and met all of our release criteria as predicted. In-vivo studies demonstrated that the optimum 5-ASA layered or matrix pellets had superior anti-inflammatory activities than Pentasa® in terms of colitis activity index (CAI), colon damage score (CDS), colon/body weight ratio and colon's tissue enzymes of glutathione (GSH) and malondialdehyde (MDA). The optimum coating formulation showed a high potential for colonic delivery of 5-ASA layered or matrix pellets and triggered drug release based on pH and time.

A review on curcumin colon-targeted oral drug delivery systems for the treatment of inflammatory bowel disease

Synthetic drugs and monoclonal antibodies are the typical treatments to combat inflammatory bowel disease (IBD). However, side effects are present when these treatments are used, and their continued application could be restricted by the high relapse rate of the disease. One potential alternative to these treatments is the use of plant-derived products. The use curcumin is one such treatment option that has seen an increase in usage in treating IBD. Curcumin is derived from a rhizome of turmeric (Curcuma longa), and the results of studies on the use of curcumin to treat IBD are promising. These studies suggest that curcumin interacts with cellular targets such as NF-κB, JAKs/STATs, MAPKs, TNF-α, IL-6, PPAR, and TRPV1 and may reduce the progression of IBD. Potentially, curcumin can be used as a therapeutic agent for patients with IBD when it reduces the incidence of clinical relapse. This review discusses the strategies utilized in designing and developing an oral colonic delivery dosage form of curcumin.

Ameliorative effect of buckwheat polysaccharides on colitis via regulation of the gut microbiota

Plant polysaccharides act as prebiotics by modulating gut microbiota. However, the functional characteristics of buckwheat Fagopyrum tataricum polysaccharides (FTP) and F. esculentum polysaccharides (FEP) on colitis prevention are not valid. This study evaluated the ameliorative effects of FTP and FEP against TNBS-induced colitis via gut microbiota modulation in rats. The characterizations of FTP and FEP were analyzed, including FTIR, TGA, DSC, and monosaccharide composition. In addition, the pathological features of colon length and symptoms in TNBS-induced colitis were improved via the intragastric preadministration of FTP and FEP. The results showed that prefeeding with FTP and FEP decreased inflammatory cytokines (IL-6, IL-1β, and TNF-α), β-glucuronidase, and mucinase, as well as increasing superoxide dismutase, catalase, and glutathione peroxidase levels, in TNBS-induced rats. A decrease in inflammatory signaling-associated proteins (NF-κB, MAPK, COX-2, and iNOS) improved the treatment of TNBS-induced colitis by buckwheat polysaccharides. Moreover, prefeeding with buckwheat polysaccharides increased the Firmicutes/Bacteroidetes ratio and short-chain fatty acid (SCFA) production and decreased the abundance of inflammation-related bacteria (Oscillospiraceae and Oscillibacter). In conclusion, FTP and FEP strongly improved TNBS-induced colitis through antioxidant, anti-inflammatory, and microbiota modulation properties, especially in the high-dose FEP group. Buckwheat polysaccharides have the potential for utilization in functional ingredients or food development.

Advances in Oral Drug Delivery Systems: Challenges and Opportunities

The oral route is the most preferred route for systemic and local drug delivery. However, the oral drug delivery system faces the harsh physiological and physicochemical environment of the gastrointestinal tract, which limits the bioavailability and targeted design of oral drug delivery system. Innovative pharmaceutical approaches including nanoparticulate formulations, biomimetic drug formulations, and microfabricated devices have been explored to optimize drug targeting and bioavailability. In this review, the anatomical factors, biochemical factors, and physiology factors that influence delivering drug via oral route are discussed and recent advance in conventional and novel oral drug delivery approaches for improving drug bioavailability and targeting ability are highlighted. We also address the challenges and opportunities of oral drug delivery systems in future.

Impact of gastric and bowel surgery on gastrointestinal drug delivery

General surgical procedures on the gastrointestinal tract are commonly performed worldwide. Surgical resections of the stomach, small intestine, or large intestine can have a significant impact on the anatomy and physiological environment of the gastrointestinal tract. These physiological changes can affect the effectiveness of orally administered formulations and drug absorption and, therefore, should be considered in rational drug formulation design for specific pathological conditions that are commonly associated with surgical intervention. For optimal drug delivery, it is important to understand how different surgical procedures affect the short-term and long-term functionality of the gastrointestinal tract. The significance of the surgical intervention is dependent on factors such as the specific region of resection, the degree of the resection, the adaptive and absorptive capacity of the remaining tissue, and the nature of the underlying disease. This review will focus on the common pathological conditions affecting the gastric and bowel regions that may require surgical intervention and the physiological impact of the surgery on gastrointestinal drug delivery. The pharmaceutical considerations for conventional and novel oral drug delivery approaches that may be impacted by general surgical procedures of the gastrointestinal tract will also be addressed.

Colon-Targeted Trans-Cinnamic Acid Ameliorates Rat Colitis by Activating GPR109A

We designed colon-targeted trans-cinnamic acid (tCA) and synthesized its conjugates with glutamic acid (tCA-GA) and aspartic acid (tCA-AA). We evaluated the anti-colitic activity of colon-targeted tCA using a dinitrobenzenesulfonic acid-induced rat colitis model. The conjugates lowered the distribution coefficient and Caco-2 cell permeability of tCA and converted to tCA in the cecum, with higher rates and percentages with tCA-GA than with tCA-AA. Following oral gavage, tCA-GA delivered a higher amount of tCA to the cecum and exhibited better anti-colitic effects than tCA and sulfasalazine (SSZ), which is the current treatment for inflammatory bowel disease. In the cellular assay, tCA acted as a full agonist of GPR109A (EC50: 530 µM). The anti-colitic effects of tCA-GA were significantly compromised by the co-administration of the GPR109A antagonist, mepenzolate. Collectively, colon-targeted tCA potentiated the anti-colitic activity of tCA by effectively activating GPR109A in the inflamed colon, enabling tCA to elicit therapeutic superiority over SSZ.

Nanoparticles Obtained from Zein for Encapsulation of Mesalazine

We encapsulated MSZ in zein nanoparticles (NP-ZN) using a desolvation method followed by drying in a mini spray dryer. These nanoparticles exhibited a size of 266.6 ± 52 nm, IPD of 0.14 ± 1.1 and zeta potential of -36.4 ± 1.5 mV, suggesting colloidal stability. Quantification using HPLC showed a drug-loaded of 43.8 µg/mg. SEM demonstrated a spherical morphology with a size variation from 220 to 400 nm. A FTIR analysis did not show drug spectra in the NPs in relation to the physical mixture, which suggests drug encapsulation without changing its chemical structure. A TGA analysis showed thermal stability up to 300 °C. In vitro release studies demonstrated gastroresistance and a sustained drug release at pH 7.4 (97.67 ± 0.32%) in 120 h. The kinetic model used for the release of MSZ from the NP-ZN in a pH 1.2 medium was the Fickian diffusion, in a pH 6.8 medium it was the Peppas-Sahlin model with the polymeric relaxation mechanism and in a pH 7.4 medium it was the Korsmeyer-Peppas model with the Fickian release mechanism, or "Case I". An in vitro cytotoxicity study in the CT26.WT cell line showed no basal cytotoxicity up to 500 μg/mL. The NP-ZN showed to be a promising vector for the sustained release of MSZ in the colon by oral route.

Ligand-modified nanocarriers for oral drug delivery: Challenges, rational design, and applications

Ligand-modified nanocarriers (LMNCs) specific to their targets have attracted increasing interest for enhanced oral drug delivery in recent decades. Although the design of LMNCs for enhanced endocytosis and improved exposure of the loaded drugs through the oral route has received abundant attention, it remains unclear how the design influences their transcellular process, especially the key factors affecting their functions. This review discusses the extracellular and cellular barriers to orally administered LMNCs in the gastrointestinal (GI) tract and new discoveries regarding the GI protein corona and the sequential transport barriers that impede the preplanned movements of LMNCs after oral administration. Furthermore, innovative progress in considering key factors (including target selection, ligand properties, and other important factors) in the rational design of LMNCs for oral drug delivery is presented. In particular, some factors that endow LMNCs with efficient transcytosis rather than only endocytosis are highlighted. Finally, the prospects of orally administered LMNCs in disease therapy for the enhanced oral/local bioavailability of active pharmaceutical ingredients, as well as emerging delivery routes, such as lymphatic drug delivery and systemic location-specific drug release based on oral transcellular LMNCs, are discussed.

Bioadhesive Tannic-Acid-Functionalized Zein Coating Achieves Engineered Colonic Delivery of IBD Therapeutics via Reservoir Microdevices

The biggest challenge in oral delivery of anti-inflammatory drugs such as 5-aminosalicylic acid (5-ASA) is to (i) prevent rapid absorption in the small intestine and (ii) achieve localized release at the site of inflammation in the lower gut, i.e., the colon. Here, we present an advanced biopolymeric coating comprising of tannic-acid-functionalized zein protein to provide a sustained, colon-targeted release profile for 5-ASA and enhance the mucoadhesion of the dosage form via a mussel-inspired mechanism. To enable localized delivery and provide high local concentration, 5-ASA is loaded into the microfabricated drug carriers (microcontainers) and sealed with the developed coating. The functionality and drug release profile of the coating are characterized and optimized in vitro, showing great tunability, scalability, and stability toward proteases. Further, ex vivo experiments demonstrate that the tannic acid functionalization can significantly enhance the mucoadhesion of the coating, which is followed up by in vivo investigations on the intestinal retention, and pharmacokinetic evaluation of the 5-ASA delivery system. Results indicate that the developed coating can provide prolonged colonic delivery of 5-ASA. Therefore, the here-developed biodegradable coating can be an eco-friendly substitute to the state-of-the-art commercial counterparts for targeted delivery of 5-ASA and other small molecule drugs.

Nanotechnology for research and treatment of the intestine

The establishment of intestinal in vitro models is crucial for elucidating intestinal cell-microbe intrinsic connections and interaction mechanisms to advance normalized intestinal diagnosis and precision therapy. This review discusses the application of nanomaterials in mucosal therapy and mechanism research in combination with the study of nanoscaffold in vitro models of the gut. By reviewing the original properties of nanomaterials synthesized by different physicochemical principles and modifying the original properties, the contribution of nanomaterials to solving the problems of short survival period, low cell differentiation rate, and poor reduction ability in traditional intestinal models is explored. According to nanomaterials’ different diagnostic mediators and therapeutic targets, the current diagnostic principles in inflammatory bowel disease, intestinal cancer, and other diseases are summarized inductively. In addition, the mechanism of action of nanomedicines in repairing mucosa, inhibiting inflammation, and alleviating the disease process is also discussed. Through such systematic elaboration, it offers a basis for nanomaterials to help advance in vitro research on the intestine and provide precision treatments in the clinic.

Current Advances in Chitosan Nanoparticles Based Oral Drug Delivery for Colorectal Cancer Treatment

As per the WHO, colorectal cancer (CRC) caused around 935,173 deaths worldwide in 2020 in both sexes and at all ages. The available anticancer therapies including chemotherapy, radiotherapy and anticancer drugs are all associated with limited therapeutic efficacy, adverse effects and low chances. This has urged to emerge several novel therapeutic agents as potential therapies for CRC including synthetic and natural materials. Orally administrable and targeted drug delivery systems are attractive strategies for CRC therapy as they minimize the side effects, enhance the efficacy of anticancer drugs. Nevertheless, oral drug delivery till today faces several challenges like poor drug solubility, stability, and permeability. Various oral nano-based approaches and targeted drug delivery systems have been developed recently, as a result of the ability of nanoparticles to control the release of the encapsulant, drug targeting and reduce the number of dosages administered. The unique physicochemical properties of chitosan polymer assist to overcome oral drug delivery barriers and target the colon tumour cells. Chitosan-based nanocarriers offered additional improvements by enhancing the stability, targeting and bioavailability of several anti-colorectal cancer agents. Modified chitosan derivatives also facilitated CRC targeting through strengthening the protection of encapsulant against acidic and enzyme degradation of gastrointestinal track (GIT). This review aims to provide an overview of CRC pathology, therapy and the barriers against oral drug delivery. It also emphasizes the role of nanotechnology in oral drug targeted delivery system and the growing interest towards chitosan and its derivatives. The present review summarizes the relevant works to date that have studied the potential applications of chitosan-based nanocarrier towards CRC treatment.

An Oral 3D Printed PLGA-Tocopherol PEG Succinate Nanocomposite Hydrogel for High-Dose Methotrexate Delivery in Maintenance Chemotherapy

High-dose methotrexate (HDMTX) is one of the chemotherapeutic agents used to treat a variety of cancers in both adults and children. However, the toxicity associated with HDMTX has resulted in the spread of infections and treatment interruption. Further, poor bioavailability due to efflux pump activities mediated by P-glycoprotein has also been linked to poor therapeutic effects of methotrexate following oral administrations. D-α-Tocopheryl poly-ethylene glycol 1000 succinate (TPGS) is known to improve the bioavailability of poorly soluble drugs by inhibiting P-gp efflux activities, thus enhancing cellular uptake. Therefore, to achieve improved bioavailability for MTX, this study aimed to design and develop a novel drug delivery system employing TPGS and a biodegradable polymer, i.e., PLGA, to construct methotrexate-loaded nanoparticles fixated in alginate-gelatine 3D printable hydrogel ink to form a solid 3D printed tablet for oral delivery. The results indicated that high accuracy (>95%) of the 3D printed tablets was achieved using a 25 G needle. In vitro, drug release profiles were investigated at pH 1.2 and pH 7.4 to simulate the gastrointestinal environment. The in vitro release profile displayed a controlled and prolonged release of methotrexate over 24 h. The in silico modeling study displayed P-gp ATPase inhibition, suggesting enhanced MTX absorption from the gastrointestinal site. The 3D-printed hydrogel-based tablet has the potential to overcome the chemotherapeutic challenges that are experienced with conventional therapies.

Foundations of gastrointestinal-based drug delivery and future developments

Gastrointestinal-based drug delivery is considered the preferred mode of drug administration owing to its convenience for patients, which improves adherence. However, unique characteristics of the gastrointestinal tract (such as the digestive environment and constraints on transport across the gastrointestinal mucosa) limit the absorption of drugs. As a result, many medications, in particular biologics, still exist only or predominantly in injectable form. In this Review, we examine the fundamentals of gastrointestinal drug delivery to inform clinicians and pharmaceutical scientists. We discuss general principles, including the challenges that need to be overcome for successful drug formulation, and describe the unique features to consider for each gastrointestinal compartment when designing drug formulations for topical and systemic applications. We then discuss emerging technologies that seek to address remaining obstacles to successful gastrointestinal-based drug delivery.

Dapsone Azo-Linked with Two Mesalazine Moieties Is a "Me-Better" Alternative to Sulfasalazine

Dapsone (DpS) is an antimicrobial and antiprotozoal agent, especially used to treat leprosy. The drug shares a similar mode of action with sulfonamides. Additionally, it possesses anti-inflammatory activity, useful for treating autoimmune diseases. Here, we developed a “me-better” alternative to sulfasalazine (SSZ), a colon-specific prodrug of mesalazine (5-ASA) used as an anti-inflammatory bowel diseases drug; DpS azo-linked with two molecules of 5-ASA (AS-DpS-AS) was designed and synthesized, and its colon specificity and anti-colitic activity were evaluated. AS-DpS-AS was converted to DpS and the two molecules of 5-ASA (up to approximately 87% conversion) within 24 h after incubation in the cecal contents. Compared to SSZ, AS-DpS-AS showed greater efficiency in colonic drug delivery following oral gavage. Simultaneously, AS-DpS-AS substantially limited the systemic absorption of DpS. In a dinitrobenzene sulfonic acid-induced rat colitis model, oral AS-DpS-AS elicited better efficacy against rat colitis than oral SSZ. Moreover, intracolonic treatment with DpS and/or 5-ASA clearly showed that combined treatment with DpS and 5-ASA was more effective against rat colitis than the single treatment with either DpS or 5-ASA. These results suggest that AS-DpS-AS may be a “me-better” drug of SSZ with higher therapeutic efficacy, owing to the combined anti-colitic effects of 5-ASA and DpS.

Designing of pH-Sensitive Hydrogels for Colon Targeted Drug Delivery; Characterization and In Vitro Evaluation

In the current research work, pH-sensitive hydrogels were prepared via a free radical polymerization technique for the targeted delivery of 5-aminosalicylic acid to the colon. Various proportions of chitosan, β-Cyclodextrin, and acrylic acid were cross-linked by ethylene glycol dimethacrylate. Ammonium persulfate was employed as an initiator. The development of a new polymeric network and the successful encapsulation of the drug were confirmed by Fourier transform infrared spectroscopy. Thermogravimetric analysis indicated high thermal stability of the hydrogel compared to pure chitosan and β-Cyclodextrin. A rough and hard surface was revealed by scanning electron microscopy. Similarly, the crystallinity of the chitosan, β-Cyclodextrin, and fabricated hydrogel was evaluated using powder X-ray diffraction. The swelling and drug release studies were performed in both acidic and basic medium (pH 1.2 and 7.4, respectively) at 37 °C. High swelling and drug release was observed at pH 7.4 as compared to pH 1.2. The increased incorporation of chitosan, β-Cyclodextrin, and acrylic acid led to an increase in porosity, swelling, loading, drug release, and gel fraction of the hydrogel, whereas a decrease in sol fraction was observed. Thus, we can conclude from the results that a developed pH-sensitive network of hydrogel could be employed as a promising carrier for targeted drug delivery systems.

Optimization study of combined enteric and time-dependent polymethacrylates as a coating for colon targeted delivery of 5-ASA pellets in rats with ulcerative colitis

Formulation design for colon-specific delivery of 5-aminosalicylic acid (5-ASA) could bring some therapeutic benefits in the treatment of ulcerative colitis (UC). In the current study, a 3² full factorial design was used to predict optimum coating composed of two enteric (poly methacrylic acid, methyl methacrylates 1:2 and 1:1) and time-dependent (poly ethyl acrylate, methyl methacrylate, trimethylammonio ethyl methacrylate chloride 1:2:0.1) polymethacrylates for colon-specific delivery of 5-ASA pellets. A unique coating composition and coating level predicted by the model was applied onto either inulin-free 5-ASA pellets or inulin-bearing 5-ASA pellets and the coated pellets were examined by dissolution test in-vitro. The coated pellets were also tested in a rat model of UC and compared with the a commercially available colonic delivery system of 5-ASA. The ratio of the two enteric polymethacrylates and time-dependet polymethacrylate of 16:64:20 w/w at a coating level of 15% was discovered as the optimum coating for delivery of 5-ASA pellets to the colon. In general, the coated pellets offered a better therapeutic outcome compared to commercially available colonic delivery system of 5-ASA and uncoated pellets in terms of colitis activity index and the colon's tissue enzymes of MDA and GSH. It seems that the coating composed of enteric and pH-dependent polymethacrylates could tune up the rate of drug release from 5-ASA-coated pellets and trigger drug release based on pH and time.

Methotrexate-based ionic liquid as a potent anticancer drug for oral delivery: In vivo pharmacokinetics, biodistribution, and antitumor efficacy

Oral delivery of the sparingly soluble drug methotrexate (MTX) is challenging owing to its poor bioavailability and low solubility. To address this challenge, the present study reports the conversion of MTX into a series of five ionic liquids (ILs) comprising a cationic component-i.e., cholinium (Cho), tetramethylammonium (TMA), tetrabutylphosphonium (TBP), or an amino acid ester-and an anionic component-i.e., MTX. The biocompatibility, pharmacokinetics, tissue distribution, and antitumor efficacy of each MTX-based IL were investigated to determine its usefulness as a pharmaceutical. Oral administration to mice revealed that proline ethyl ester MTX (IL[ProEt][MTX]) had 4.6-fold higher oral bioavailability than MTX sodium, followed by aspartic diethyl ester MTX, IL[TBP][MTX], IL[Cho][MTX], and IL[TMA][MTX]. The peak plasma concentration, elimination half-life, area under the plasma concentration, mean absorption time, and body clearance of IL[ProEt][MTX] were significantly (p < 0.0001) higher by 1.7-, 6.2-, 4.6-, 2.5-, and 3.6-fold, respectively, than those of MTX sodium. MTX accumulation in the lungs, spleen, kidney, and gastrointestinal tract was also reduced by 5.6-, 1.8-, 1.5-, and 1.4-fold, respectively, indicating the IL formulations had lower systemic toxicity than free MTX. Mechanistic studies revealed that the IL[ProEt][MTX] solution formed spherical structures with an average size of 190 nm. This was probably responsible for its improved oral absorption performance in vivo. In vivo antitumor studies also demonstrated that IL[ProEt][MTX] suppressed tumor growth more than MTX sodium. These results suggest that MTX-based ILs provide a simple scalable approach to improving the oral bioavailability of poorly soluble MTX.

Cellulose Nanofibers Improve the Performance of Retrograded Starch/Pectin Microparticles for Colon-Specific Delivery of 5-ASA

Cellulose nanofibers (CNF) were employed as the nanoreinforcement of a retrograded starch/pectin (RS/P) excipient to optimize its colon-specific properties. Although starch retrogradation ranged from 32 to 73%, CNF addition discretely disfavored the RS yield. This result agrees with the finding that in situ CNF reduces the presence of the RS crystallinity pattern. A thermal analysis revealed that the contribution of pectin improves the thermal stability of the RS/CNF mixture. Through a complete factorial design, it was possible to optimize the spray-drying conditions to obtain powders with high yield (57%) and low moisture content (1.2%). The powders observed by Field Emission Gum Scanning Electron Microscopy (FEG-SEM) had 1–10 µm and a circular shape. The developed methodology allowed us to obtain 5-aminosalicilic acid-loaded microparticles with high encapsulation efficiency (16–98%) and drug loading (1.97–26.63%). The presence of CNF in RS/P samples was responsible for decreasing the burst effect of release in simulated gastric and duodenal media, allowing the greatest mass of drug to be targeted to the colon. Considering that spray-drying is a scalable process, widely used by the pharmaceutical industry, the results obtained indicate the potential of these microparticles as raw material for obtaining other dosage forms to deliver 5-ASA to the distal parts of gastrointestinal tract, affected by inflammatory bowel disease.

A review of the biological and pharmacological activities of mesalazine or 5-aminosalicylic acid (5-ASA): an anti-ulcer and anti-oxidant drug

Mesalazine, also known as 5-aminosalicylic acid (5-ASA), is a synthetic drug from the family of nonsteroidal anti-inflammatory drugs (NSAIDs) used for inflammatory diseases of the gastrointestinal tract. However, 5-ASA has also been used for various other diseases due to its pharmacological effects, but they are usually scattered across various publications, which may limit further research and clinical use of this drug. This review is a summary of published information on the biological and pharmacological effects of 5-ASA with the aim of identifying its anti-oxidant role and medicinal use. 5-ASA data have been collected from 1987 to February 2021 using major databases such as Web of Science, PubMed, Elsevier, Wiley Online Library, Springer, Google Scholar, etc. According to research, the pharmacological and biological effects of 5-ASA include treatment of inflammatory bowel disease, and anti-oxidant, anti-inflammatory, antibacterial, antifungal, anticancer, anti-amyloid, gastric protection (gastroprotective), and antidiverticulosis properties. Numerous pharmacological studies have shown that 5-ASA is an anti-oxidant and anti-ulcer compound with high therapeutic potential that, if the appropriate dose is discovered, its chemical structure changes and its effectiveness is optimized, 5-ASA has been used experimentally for other diseases.

Formulation and evaluation of hydroxypropylmethylcellulose-dicyclomine microsponges for colon targeted drug delivery: In vitro and in vivo evaluation

OBJECTIVE

The objective of present study was to design novel colon targeted delivery of dicyclomine Hydrochloride (DCH) microsponges.

METHODS

Microsponges (MS1-MS4) based on different ratios of hydroxypropylmethylcellulose (HPMC) and DCH was prepared by quasi-emulsion solvent diffusion method. Micro-sponges were analyzed by determining percent yield, encapsulation efficiency, drug content, drug-polymer compatibility and thermal stability. Kinetic analysis of thermal stability data was done by Chang method, Friedman method and Broido method. In vitro dissolution study was carried out at pH 1.2, pH 6.8 and pH 7.4 at different time intervals.

RESULTS

Results showed that there was no chemical interaction between DCH and HPMC in all microsponge formulations. Production yield, drug content and encapsulation efficiency were enhanced on increasing the drug-polymer ratio. Thermal stability of all the micro-sponges was greater than that of pure drug. In vitro drug release was decreased on increasing the polymer concentration at different pH levels. The newly prepared micro-sponges based on HPMC were confirmed as a promising means of colon targeted delivery of DCH. An HPLC method was developed and validated for the bioequivalence study of newly designed microsponges. Pharmacokinetics parameters were calculated using linear trapezoidal method after single oral administration of microsponges in white albino rabbits. Pharmacokinetics results indicate an enhancement in the value of t1/2, tmax, Cmax and AUC0-t of DCH in the microsponges as compared to standard DCH showing enhanced bioavailability of drug after microsponges formation.

CONCLUSION

The current study shows a new approach for colon specific delivery of DCH based on microsponges.

Recent Applications of Azo Dyes: A Paradigm Shift from Medicinal Chemistry to Biomedical Sciences

Azo molecules possess the characteristic azo bond (-N=N-) and are considered fascinating motifs in organic chemistry. Since the last century, these brightly colored compounds have been widely employed as dyes across several industries in applications for printing, food, paper, cosmetics, lasers, electronics, optics, material sciences, etc. The discovery of Prontosil, an antibacterial drug, propelled azo compounds into the limelight in the field of medicinal chemistry. Subsequent discoveries including Phenazopyridine, Basalazide, and Sulfasalazine enabled azo compounds to occupy a significant role in the drug market. Furthermore, azo compounds have been employed as antibacterial, antimalarial, antifungal, antioxidant, as well as antiviral agents. The metabolic degradation of many azo dyes can induce liver problems if ingested, posing a safety concern and limiting their application as azo dyes in medicinal chemistry. However, azo dyes remain particularly significant for applications in cancer chemotherapy. Recently, a paradigm shift has been observed in the use of azo dyes: from medicinal chemistry to biomedical sciences. The latter benefits from azo dye application are related to imaging, drug delivery, photo-pharmacology and photo switching. Herein, we have compiled and discussed recent works on azo dye compounds obtained so far, focusing on their medicinal importance and future prospects.

5-Aminosalicylic Acid Loaded Chitosan-Carrageenan Hydrogel Beads with Potential Application for the Treatment of Inflammatory Bowel Disease

The aim of our work is to prepare mucoadhesive particles with biopolymers and 5-Aminosalicylic acid (5ASA) using the ionotropic gelation technique to ensure a controlled drug release at the colon level with potential applications in the treatment of intestinal bowel disease (IBD). The preparation of particles through the crosslinking of Chitosan (CS) with sodium tripolyphosphate (TPP) using different mass ratios and the influence of the k-Carrageenan (kCG) layer were studied. UV–VIS spectrometry was employed to assess encapsulation efficiency and drug release profile of 5ASA. The particles were investigated using FT-IR spectrometry for chemical characterization and the DLS results highlighted a monodisperse particle size distribution. The morphology of the polymeric beads was investigated using micro-computer tomography (µCT) and Scanning Electron Microscopy (SEM). Particles based on Chitosan and k-Carrageenan were able to incorporate and preserve 5ASA in an acidic and alkaline medium. The 5ASA loaded polymeric particles obtained after immersion for 1 h in kCG solution exhibited the lowest release rate in pH = 1.2. Biocompatibility studies performed on all of the particles displayed a good viability for the CCD 841 CoN cells and low cytotoxicity. All of the results have shown that these new biomaterials could be a versatile platform of targeted carriers with potential applications in inflammatory bowel disease treatment.

Identification of a new azoreductase driven prodrug from bardoxolone methyl and 5-aminosalicylate for the treatment of colitis in mice

For local treatment of ulcerative colitis, a new azoreductase driven prodrug CDDO-AZO from bardoxolone methyl (CDDO-Me) and 5-aminosalicylate (5-ASA) was designed, synthesized and biologically evaluated. It is proposed that orally administrated CDDO-AZO is stable before reaching the colon, while it can also be triggered by the presence of azoreductase in the colon to fragment into CDDO-Me and 5-ASA, generating potent anti-colitis effects. Superior to olsalazine (OLS, a clinically used drug for ulcerative colitis) and CDDO-Me plus 5-ASA, CDDO-AZO significantly attenuated inflammatory colitis symptoms in DSS-induced chronic colitis mice, which suggested that CDDO-AZO may be a promising anti-ulcerative colitis agent.

Modern World Applications for Nano-Bio Materials: Tissue Engineering and COVID-19

Over the past years, biomaterials-based nano cues with multi-functional characteristics have been engineered with high interest. The ease in fine tunability with maintained compliance makes an array of nano-bio materials supreme candidates for the biomedical sector of the modern world. Moreover, the multi-functional dimensions of nano-bio elements also help to maintain or even improve the patients' life quality most securely by lowering or diminishing the adverse effects of in practice therapeutic modalities. Therefore, engineering highly efficient, reliable, compatible, and recyclable biomaterials-based novel corrective cues with multipurpose applications is essential and a core demand to tackle many human health-related challenges, e.g., the current COVID-19 pandemic. Moreover, robust engineering design and properly exploited nano-bio materials deliver wide-ranging openings for experimentation in the field of interdisciplinary and multidisciplinary scientific research. In this context, herein, it is reviewed the applications and potential on tissue engineering and therapeutics of COVID-19 of several biomaterials. Following a brief introduction is a discussion of the drug delivery routes and mechanisms of biomaterials-based nano cues with suitable examples. The second half of the review focuses on the mainstream applications changing the dynamics of 21st century materials. In the end, current challenges and recommendations are given for a healthy and foreseeable future.

Oral delivery of micro/nanoparticulate systems based on natural polysaccharides for intestinal diseases therapy: Challenges, advances and future perspectives

Colon-targeted oral delivery of drugs remains as an appealing and promising approach for the treatment of prevalent intestinal diseases (ID), such as inflammatory bowel disease (IBD) and colorectal cancer (CRC). Notwithstanding, there are numerous challenges to effective drug delivery to the colon, which requires the design of advanced strategies. Micro- and nanoparticles have received great attention as colon-targeted delivery platforms due to their reduced size and structural composition that favors the accumulation and/or residence time of drugs at the site of action and/or absorption, contributing to localized therapy. The choice by natural polysaccharides imparts key properties and advantages to the nano-in-microparticulate systems to effective colon-specific oral delivery. This review proposes to discuss the physiological barriers imposed by the gastrointestinal tract (GIT) against oral administration of drugs, as well as pathological factors and challenges of the ID for oral delivery of colon-targeted systems. We then provide an updated progress about polysaccharides-based colon-targeted drug delivery systems, including microparticulate, nanoparticulate and nano-in-microparticulate systems, highlighting their key properties, advantages and limitations to achieving targeted delivery and efficacious therapy within the colon. Lastly, we provide future perspectives, towards advances in the field and clinical translation of colon-targeted oral delivery systems for ID therapy.

Commensal flora triggered target anti-inflammation of alginate-curcumin micelle for ulcerative colitis treatment

Ulcerative colitis (UC) is a chronic, idiopathic inflammatory bowel disease characterized by dysregulation of colon immune response. Curcumin (Cur) has strong anti-inflammatory activities, but the application is severely hindered by the extremely hydrophobicity and pitiful bioavailability. Alginate (Alg), a natural polysaccharide with ideal solubility and biosafety, was introduced to prepare the esterified alginate-curcumin conjugate (Alg-Cur) and constructed stable Alg-Cur micelle in physiological solutions. Compared with crystalline Cur, the target anti-inflammatory activities of Alg-Cur were systematically investigated. The results showed that Alg-Cur exerted effective anti-inflammatory effects in Raw 264.7 cells. After oral administration, 92.32 % of Alg-Cur reached colon, and the ester bonds were quickly sheared by abundant esterase produced by commensal anaerobic flora. The released Cur was quickly absorbed in-situ in monomolecular state, and effectively ameliorated the colonic inflammation and tissue damage by inhibiting the TLR4 expression in colonic epithelial cell, reducing the transcription and expression of the pro-inflammation cytokines downstream, as well as the infiltration of lymphocytes, macrophages and neutrophils. The Alg-Cur micelle effectively enhanced the hydrophilicity and bioavailability of Cur, and the commensal flora triggered Cur release showed great potential for UC treatment.

Hybrid Nanocomposite Platform, Based on Carbon Nanotubes and Poly(Methylene Blue) Redox Polymer Synthesized in Ethaline Deep Eutectic Solvent for Electrochemical Determination of 5-Aminosalicylic Acid

A novel hybrid composite of conductive poly(methylene blue) (PMB) and carbon nanotubes (CNT) was prepared for the detection of 5-aminosalicylic acid (5-ASA). Electrosynthesis of PMB with glassy carbon electrode (GCE) or with carbon nanotube modified GCE was done in ethaline deep eutectic solvent of choline chloride mixed with ethylene glycol and a 10% v/v aqueous solution. Different sensor architectures were evaluated in a broad range of pH values in a Britton-Robinson (BR) buffer using electrochemical techniques, chronoamperometry (CA), and differential pulse voltammetry (DPV), to determine the optimum sensor configuration for 5-ASA sensing. Under optimal conditions, the best analytical performance was obtained with CNT/PMB_DES/GCE in 0.04 M BR buffer pH 7.0 in the range 5-100 µM 5-ASA using the DPV method, with an excellent sensitivity of 9.84 μA cm^-2 μM^-1 (4.9 % RSD, n = 5) and a detection limit (LOD) (3σ/slope) of 7.7 nM, outclassing most similar sensors found in the literature. The sensitivity of the same sensor obtained in CA (1.33 μA cm^-2 μM^-1) under optimal conditions (pH 7.0, E_app = +0.40 V) was lower than that obtained by DPV. Simultaneous detection of 5-ASA and its analogue, acetaminophen (APAP), was successfully realized, showing a catalytic effect towards the electro-oxidation of both analytes, lowering their oxidation overpotential, and enhancing the oxidation peak currents and peak-to-peak separation as compared with the unmodified electrode. The proposed method is simple, sensitive, easy to apply, and economical for routine analysis.

Application of inulin/Eudragit RS in 5-ASA pellet coating with tuned, sustained-release feature in an animal model of ulcerative colitis

A tunable release of 5-aminosalicylic acid (5-ASA) could bring therapeutic benefits in the treatment of inflammatory bowel disease (IBD). A 3² factorial design was used to achieve a tuned delivery of 5-ASA pellets in the small and large intestine using a coating composed of inulin/Eudragit RS (RS). The ratio of inulin/RS and coating level were independent variables while the dependent variables were the percent of drug release at pH 1.2 in 2 h and total release of drug in 10 h at pH 6.8. 5-ASA release from pellets was examined at different pH levels and the therapeutic efficacy of the optimum pellets was compared to 5-ASA pellets of Pentasa in rats with ulcerative colitis. The inulin/RS of 18/82 at a coating level of 16% was found to be the optimum for delivery of the drug to the small and large intestine. The coated pellets offered a superior therapeutic outcome compared to uncoated pellets and Pentasa in terms of colitis activity index (CAI), and the colon's tissue enzymes of GSH and MDA. The optimum coating composed of inulin and RS could offer a tuned sustained release of 5-ASA throughout the small and large intestine with the sensitivity of drug release to microbial degradation.

Preparation and characterization of PEGylated liposomal Doxorubicin targeted with leptin-derived peptide and evaluation of their anti-tumor effects, in vitro and in vivo in mice bearing C26 colon carcinoma

Employing targeting ligands on the surface of liposomes has the great potential to improve therapeutic efficacy and decreases off-target effects of liposomal formulations. In the present study, a leptin-derived peptide (Lp31) was evaluated to optimize the therapeutic efficacy of PEGylated liposomal Doxorubicin (PLD, Caelyx®). Leptin is an appetite regulatory hormone that is secreted into the blood circulation by the adipose tissue and it functions via its over expressed receptors (Ob-R) in a wide variety of cancers. Lp31, as targeting ligand, was conjugated to Maleimide-PEG2000-DSPE and then post-inserted into Caelyx. The anti-tumor activity and therapeutic efficacy of leptin modified Caelyx were evaluated and compared with Caelyx. The in vitro experiments demonstrated enhanced cytotoxicity and cellular uptake of Lp31-targeted Caelyx in C26 cell line compared to Caelyx. In BALB/c mice bearing C-26 murine carcinoma, Lp31 modified Caelyx groups exhibited significantly higher doxorubicin concentration at tumor tissue. Furthermore, Lp31 modified Caelyx at the dose of 10 mg/kg resulted in significant tumor growth inhibition and enhanced survival time compared to Caelyx. According to these results, the novel Lp31-liposomal doxorubicin offers great promise for the treatment of colon cancer and merits further investigation.

Xylan microparticles for controlled release of mesalamine: Production and physicochemical characterization

Xylan extracted from corn cobs was used to produce mesalamine-loaded xylan microparticles (XMP5-ASA) by cross-linking polymerization using a non-hazardous cross-linking agent. The microparticles were characterized by thermal analysis (DSC/TG), X-ray diffraction (XRD), Infrared spectroscopy (FTIR-ATR) and scanning electron microscopy (SEM). A comparative study of the in vitro drug release from XMP5-ASA and from gastro-resistant capsules filled with XMP5-ASA (XMPCAP5-ASA) or 5-ASA was also performed. NMR, FTIR-ATR, XRD and DSC/TG studies indicated molecularly dispersed drug in the microparticles with increment on drug stability. The release studies showed that XMPCAP5-ASA allowed more efficient drug retention in the simulated gastric fluid and a prolonged drug release lasting up to 24 h. XMPCAP5-ASA retained approximately 48 % of its drug content after 6 h on the drug release assay. Thus, the encapsulation of 5-ASA into xylan microparticles together with gastro-resistant capsules allowed a better release control of the drug during different simulated gastrointestinal medium.

Protein corona formed in the gastrointestinal tract and its impacts on oral delivery of nanoparticles

The interaction of nanoparticles (NPs) with proteins and the formation of protein corona in the biological fluids are of great interest and significance for drug delivery. In the past decade, the corona formation in the blood and its impacts on the in vitro and in vivo fate of NPs has been well investigated and reviewed. Recently, more and more attention is paid to the nano-protein interactions taking place in the gastrointestinal tract (GIT) between the orally administered NPs and the digestive enzymes. The enzyme corona formed in the GIT can significantly affect the properties, gastrointestinal transit, and oral absorption of NPs. Since oral delivery is the most preferred delivery route, comprehensively understanding the corona formation in the GIT and its impacts on oral delivery NPs are of great importance. Herein, we aim to summarize the recent updates on the nano-protein interactions between NPs and digestive enzymes, and launch an interesting discussion on the potentials of using the digestive enzyme corona for the colon targeted delivery.