Recent developments of nanoparticle-delivered dosage forms for buccal delivery

Evaluating the role of amino acids and isothermal dry particle coating in modulating buccal permeation of large molecule drug vancomycin

The formulation and delivery of macromolecules through the oral route pose considerable challenges due to factors such as large molecular weight, pH sensitivity, and limited formulation approaches. This challenge is compounded if the drug is poorly permeable, necessitating innovative drug delivery strategies. Vancomycin, a widely prescribed glycopeptide antibiotic, has an oral bioavailability of less than 10%, leading to predominantly intravenous administration and potential patient discomfort. This study explores the potential of the buccal route as a non-invasive, highly vascularised alternative route of administration, offering a rapid onset of action while bypassing the first-pass metabolism. In this study, vancomycin was coated with L-glutamic acid using an isothermal dry particle coater to modulate permeation through the buccal cell line, TR146. Results confirm significant impact of both amino acid concentration and dry particle coating on the rate and extent of drug permeability. With the introduction of L-glutamic acid and utilisation of the isothermal dry particle coater, vancomycin's permeation profile increased six-fold compared to the control due to the formation of drug ion-pair complex. Imaging studies showed the presence of layered micronized glutamic acid particles on the surface of dry coated vancomycin particles which confirms the role of dry coating and amino acid concentration in modulating drug permeation. Microbiology experiments in Staphylococcus aureus, minimum inhibitory concentration and biofilm disruption studies, provided confirmatory evidence of antimicrobial activity of dry coated glutamic acid-vancomycin ion pair particulate structure. This study demonstrates, for the first-time, buccal delivery of dry coated large molecule drug, vancomycin, through controlled deposition of amino acid using innovative particle coating strategy.

Fabrication and Characterization of Pectin Films Containing Solid Lipid Nanoparticles for Buccal Delivery of Fluconazole

Fluconazole (FZ) is a potential antifungal compound for treating superficial and systemic candidiasis. However, the use of conventional oral drug products has some limitations. The development of buccal film may be a potential alternative to oral formulations for FZ delivery. The present study involved the development of novel FZ-loaded solid lipid nanoparticles (FZ-SLNs) in pectin solutions and the investigation of their particle characteristics. The particle sizes of the obtained FZ-SLNs were in the nanoscale range. To produce pectin films with FZ-SLNs, four formulations were selected based on the small particle size of FZ-SLNs and their suitable polydispersity index. The mean particle sizes of all chosen FZ-SLNs formulations did not exceed 131.7 nm, and the mean polydispersity index of each formulation was less than 0.5. The properties of films containing FZ-SLNs were then assessed. The preparation of all FZ-SLN-loaded pectin films provided the mucoadhesive matrices. The evaluation of mechanical properties unveiled the influence of particle size variation in FZ-SLNs on the integrity of the film. The Fourier-transform infrared spectra indicated that hydrogen bonds could potentially form between the pectin-based matrix and the constituents of FZ-SLNs. The differential scanning calorimetry thermogram of each pectin film with FZ-SLNs revealed that the formulation was thermally stable and behaved in a solid state at 37 °C. According to a drug release study, a sustained drug release pattern with a burst in the initial stage for all films may be advantageous for reducing the lag period of drug release. All prepared films with FZ-SLNs provided a sustained release of FZ over 6 h. The films containing FZ-SLNs with a small particle size provided good permeability across the porcine mucosa. All film samples demonstrated antifungal properties. These results suggest the potential utility of pectin films incorporating FZ-SLNs for buccal administration.

Tabletized Nanomedicine: From the Current Scenario to Developing Future Medicine

The limitations of conventional therapeutic treatments prevailed in the development of nanotechnology-based medical formulations, termed nanomedicine. Nanomedicine is an advanced medicine that often consists of therapeutic agent(s) embedded in biodegradable or biocompatible nanomaterial-based formulations. Among nanomedicine approaches, tablet (oral) nanomedicine is still under development. In tabletized nanomedicine, the dynamic interplay between nanoformulations and the intricate milieu of the gastrointestinal tract simulates a pivotal role, particularly accentuating the influence exerted upon the luminal, mucosal, and epithelial cells. In this work, we document the perspectives and opportunities of nanoformulations toward the development of tabletized nanomedicine. This review also unveils the notion of integrating nanomedicine within a tablet formulation, which facilitates the controlled release of drugs, biomolecules, and agent(s) from the formulation to achieve a better therapeutic response. Finally, an attempt was made to explore current trends in nanomedicine technology such as bacteriophage, probiotic, and oligonucleotide tabletized nanomedicine and the combination of nanomedicine with imaging agents, i.e., nanotheranostics.

Tamarind seed polysaccharide-guar gum buccal films loaded with resveratrol-bovine serum albumin nanoparticles: Preparation, characterization, and mucoadhesiveness assessment

Mucoadhesive films based on tamarind seed polysaccharide and guar gum (TSP-GG) were formulated for buccal delivery of resveratrol. Resveratrol-bovine serum albumin nanoparticles (Res-BSA) were prepared and dispersed in TSP-GG to improve its buccal mucoadhesiveness. The impregnation of Res-BSA induced the dense internal structures of TSP-GG and improved its strength and rigidity. Structural characterization showed that resveratrol existed in an amorphous state in the films containing Res-BSA, and hydrogen bonding was formed between Res-BSA and the film matrices. The films containing Res-BSA exhibited good uniformity in thickness, weight, and resveratrol content, and their surface pH was near neutral, ranging between 6.78 and 7.09. Increasing Res-BSA content reduced the water contact angle of TSP-GG (from 75.9° to 59.6°). The swelling and erosion studies indicated the favorable hydration capacity and erosion resistance of the films containing Res-BSA. Additionally, the addition of Res-BSA imparted enhanced ex vivo mucoadhesive force, in the range of 1.53 N to 1.98 N, and extended ex vivo residence time, between 17.9 h and 18.9 h, to TSP-GG. The current study implied that the composite systems of TSP-GG and Res-BSA may be a novel platform for buccal mucosal delivery of resveratrol.

Atorvastatin liposomes in a 3D-printed polymer film: a repurposing approach for local treatment of oral candidiasis

Oral candidiasis (OC) is an opportunistic fungal infection, common amongst the elderly and the immunocompromised. Unfortunately, the therapeutic efficacy of common antifungals is imperiled by the rise of antifungal drug resistance. An alternative promising therapeutic option possibly contributing to antifungal therapy is drug repurposing. Herein, we aimed to employ novel pharmaceutical drug delivery for enhancing the emerging antifungal potential of the hypocholesterolemic drug atorvastatin (ATV). ATV-propylene-glycol-liposomes (ATV/PG-Lip) were prepared then integrated in 3D-printed (3DP) mucoadhesive films comprising chitosan, polyvinyl-alcohol and hydroxypropyl methylcellulose, as an innovative blend, for the management of OC. ATV/PG-Lip demonstrated good colloidal properties of particle size (223.3 ± 2.1 nm), PDI (0.12 ± 0.001) and zeta potential (-18.2 ± 0.3 mV) with high entrapment efficiency (81.15 ± 1.88%) and sustained drug release. Also, ATV/PG-Lip showed acceptable three-month colloidal stability and in vitro cytocompatibility on human gingival fibroblasts. The developed 3DP-films exhibited controlled ATV release (79.4 ± 1.4% over 24 h), reasonable swelling and mucoadhesion (2388.4 ± 18.4 dyne/cm2). In vitro antifungal activity of ATV/PG-Lip was confirmed against fluconazole-resistant Candida albicans via minimum inhibitory concentration determination, time-dependent antifungal activity, agar diffusion and scanning electron microscopy. Further, ATV/PG-Lip@3DP-film exceeded ATV@3DP-film in amelioration of infection and associated inflammation in an in vivo oral candidiasis rabbit model. Accordingly, the results confirm the superiority of the fabricated ATV/PG-Lip@3DP-film for the management of oral candidiasis and tackling antifungal resistance.

Nanotechnology-based mucoadhesive and mucus-penetrating drug-delivery systems for transbuccal drug delivery

Buccal drug-delivery systems present a promising approach for the drug delivery to the buccal mucosa, addressing oral cavity-specific problems, enabling systemic delivery and minimizing adverse effects on biological systems. Numerous strategies have been proposed to load drug-containing nanoparticles (NPs) to the buccal mucosa for local and systemic applications. There has been considerable interest in the development of mucoadhesive buccal formulations, particularly hydrogel composites utilizing mucoadhesive films incorporating NPs. Drug permeability and controlled drug release through buccal drug delivery continues to pose a challenge despite the availability of various remedies. This review highlights the need for, mechanisms and latest advances in NP-based transbuccal drug delivery with a focus on various pathological disorders and examples and limitations of the different methods.

Fabrication of 3D Printed Hollow Microneedles by Digital Light Processing for the Buccal Delivery of Actives

In the present study, two different microneedle devices were produced using digital light processing (DLP). These devices hold promise as drug delivery systems to the buccal tissue as they increase the permeability of actives with molecular weights between 600 and 4000 Da. The attached reservoirs were designed and printed along with the arrays as a whole device. Light microscopy was used to quality control the printability of the designs, confirming that the actual dimensions are in agreement with the digital design. Non-destructive volume imaging by means of microfocus computed tomography was employed for dimensional and defect characterization of the DLP-printed devices, demonstrating the actual volumes of the reservoirs and the malformations that occurred during printing. The penetration test and finite element analysis showed that the maximum stress experienced by the needles during the insertion process (10 N) was below their ultimate compressive strength (240-310 N). Permeation studies showed the increased permeability of three model drugs when delivered with the MN devices. Size-exclusion chromatography validated the stability of all the actives throughout the permeability tests. The safety of these printed devices for buccal administration was confirmed by histological evaluation and cell viability studies using the TR146 cell line, which indicated no toxic effects.

Formulation and Evaluation of Prednisolone Sodium Metazoate-Loaded Mucoadhesive Quatsomal Gel for Local Treatment of Recurrent Aphthous Ulcers: Optimization, In Vitro, Ex Vivo, and In Vivo Studies

This study aims to formulate a buccal mucoadhesive gel containing prednisolone sodium metazoate-loaded quatsomes for efficient localized therapy of recurrent aphthous ulcers. Quatsomes were prepared using a varied concentration of quaternary ammonium surfactants (QAS) and cholesterol (CHO). A 2³ factorial design was conducted to address the impact of independent variables QAS type (X₁), QAS to CHO molar ratio (X₂), and sonication time (X₃). The dependent variables were particle size (PS; Y₁), polydispersity index (PDI; Y₂), zeta potential (ZP; Y₃), entrapment efficiency percent (EE%; Y₄) and percent of drug released after 6 h (Q6%: Y₅). Then, the selected quatsomes formula was incorporated into different gel bases to prepare an optimized mucoadhesive gel to be evaluated via in vivo study. The PS of the developed quatsomes ranged from 69.47 ± 0.41 to 113.28 ± 0.79 nm, the PDI from 0.207 ± 0.004 to 0.328 ± 0.004, ZP from 45.15 ± 0.19 to 68.1 ± 0.54 mV, EE% from 79.62 ± 1.44 to 98.60% ± 1.22 and Q6% from 58.39 ± 1.75 to 94.42% ± 2.15. The quatsomal mucoadhesive gel showed rapid recovery of ulcers, which was confirmed by the histological study and the evaluation of inflammatory biomarkers. These results assured the capability of the developed quatsomal mucoadhesive gel to be a promising formulation for treating buccal diseases.

Buccal delivery of small molecules and biologics: Of mucoadhesive polymers, films, and nanoparticles - An update

Buccal delivery of small and large molecules is an attractive route of administration that has been studied extensively over the past few decades. This route bypasses first-pass metabolism and can be used to deliver therapeutics directly to systemic circulation. Moreover, buccal films are efficient dosage forms for drug delivery due to their simplicity, portability, and patient comfort. Films have traditionally been formulated using conventional techniques, including hot-melt extrusion and solvent casting. However, newer methods are now being exploited to improve the delivery of small molecules and biologics. This review discusses recent advances in buccal film manufacturing, using the latest technologies, such as 2D and 3D printing, electrospraying, and electrospinning. This review also focuses on the excipients used in the preparation of these films, with emphasis on mucoadhesive polymers and plasticizers. Along with advances in manufacturing technology, newer analytical tools have also been used for the assessment of permeation of the active agents across the buccal mucosa, the most critical biological barrier and limiting factor of this route. Additionally, preclinical and clinical trial challenges are discussed, and some small molecule products already on the market are explored.

Buccal Thin Films as Potent Permeation Enhancers for Cytisine Transbuccal Delivery

Cytisine (CYT) is a powerful anti-smoking compound which could greatly benefit from transbuccal delivery because of both its unfavorable pharmacokinetics after oral administration and its intrinsic ability to permeate the buccal mucosa. This work aims to design CYT-loaded buccal thin films suitable for transbuccal drug delivery due to its capability of promoting the interaction between CYT and the buccal membrane. The solvent casting method was employed to prepare several thin films combining various excipients such as matrixing polymers, mucoadhesion agents, plasticizers and other compounds as humectants and sweeteners, component ratios and solvents. A total of 36 compositions was prepared and four of them emerged as the most promising in terms of aspect and flexibility. They all demonstrated homogeneity, thinness, low swelling degree, and controlled drug release according to the Power Law and Peppas-Sahlin mathematical models. Mainly, they proved able to interact with the ex vivo porcine buccal mucosa producing mucoadhesive effects, and act as potent permeation enhancers. In particular, Film B emerged as suitable as it produced a 10.6-fold Kp enhancement and a great Js value (52.33 μg/cm²·h^-1), even when compared to highly concentrated CYT solutions.

The use of natural gums to produce nano-based hydrogels and films for topical application

Natural gums are a source of biopolymeric materials with a wide range of applications for multiple purposes. These polysaccharides are extensively explored due to their low toxicity, gelling and thickening properties, and bioadhesive potential, which have sparked interest in researchers given their use in producing pharmaceutic dosage forms compared to synthetic agents. Hence, gums can be used as gelling and film-forming agents, which are suitable platforms for topical drug administration. Additionally, recent studies have demonstrated the possibility of obtaining nanocomposite materials formed by a polymeric matrix of gums associated with nanoscale carriers that have shown superior drug delivery performance and compatibility with multiple administration routes compared to starting components. In this sense, research on topical natural gum-based form preparation containing drug-loaded nanocarriers was detailed and discussed herein. A special focus was devoted to the advantages achieved regarding physicochemical and mechanical features, drug delivery capacity, permeability through topical barriers, and biocompatibility of the hydrogels and polymeric films.

Architecting novel multilayer nanosponges for co-administration of two drugs managing high-risk type II diabetes mellitus patients suffering from cardiovascular diseases

Nanosponges are porous solid nanoparticles composed of hyper-cross-linked polymers that serve as specific micro-domains designed for the co-encapsulation of two drugs with different chemical structures. Our goal was to engineer a novel assembly of multilayer nanosponges (MLNS) based on a layer-by-layer approach. This MLNS was engineered to incorporate two drugs (linagliptin and empagliflozin) in a new drug delivery route. Linagliptin has a low oral bioavailability due to intestinal degradation and low permeability. Its pharmacokinetics shows a non-linear profile which leads to a disproportionate increase in its effectiveness with increasing the dose frequency. Empagliflozin has a low permeability and is very slightly soluble in aqueous media between pH 1-7.5. MLNS could improve their bioavailability along with resolving possible risks due to the non-linear pharmacokinetics of linagliptin and maximizing its dose efficiency. 2³ factorial design was used to optimize the novel systems. MLNS (F4) was chosen as the optimal system with an average diameter of 40 nm and the highest entrapment efficiency which accounts for 92.93 % ± 2.27 and 100.94 % ± 0.55 for linagliptin and empagliflozin respectively. Förster resonance energy transfer confirmed the formation of a multilayer structure in MLNS. The optimized system was incorporated within chitosan mucoadhesive buccal films which were optimized through 2²factorial design. The permeation study from optimized MLNS-film (B4) ensured an improved empagliflozin permeation along with a controlled efflux for linagliptin, resolving possible risks due to the nonlinear plasma profile. The in-vivo study of MLNS-film (B4) revealed that AUC_(0-∞)of linagliptin and empagliflozin was enhanced by two-fold and ten-fold, respectively. Therefore, the nano-buccal formulation for the co-delivered hypoglycemic drugs could contribute to improved clinical efficacy in the treatment of diabetes.

Hollow mesoporous silica nanoparticles-loaded ion-crosslinked bilayer films with excellent mechanical properties and high bioavailability for buccal delivery

Mucoadhesive buccal films (MBFs) become the most promising buccal mucosal delivery system duo to its advantageous properties, including simple preparation technique and better patient compliance. The mechanical properties and mucoadhesion of MBFs are crucial in their successful performance as well as manufacturing and administration. In this study, we prepared hollow mesoporous silica nanoparticles-loaded ion-crosslinked bilayer films (CCS-PVA-TPP-FSM@HMSNs) using carboxymethyl chitosan (CCS) and polyvinyl alcohol (PVA) for buccal delivery of furosemide (FSM). The FSM-loaded hollow mesoporous silica nanoparticles (FSM@HMSNs) were firstly characterized by SEM, TEM, and nitrogen adsorption/desorption. Then, we constructed an ion-crosslinked network using CCS and PVA employed with the solution casting method, and sodium tripolyphosphate (TPP) was used as a hydrogen bond crosslinking agent. The formulation was optimized through Box-Behnken design, where the impact of the proportion of the ingredients on the quality of the films was evaluated entirely. Herein, folding endurance, swelling, tensile strength, and adhesion force were selected as response variables. Morphology, mechanical, spectroscopic, thermal, and safety of CCS-PVA-TPP-FSM@HMSNs films were also investigated. The release and permeability behaviors of CCS-PVA-TPP-FSM@HMSNs films were evaluated by in vitro drug release, across isolated porcine buccal and TR146 cell model. The CCS-PVA-TPP-FSM@HMSNs films showed outstanding mechanical properties, suitable bioadhesion, high drug loading, significant sustained-release properties, and improved permeability. In pharmacokinetic study with golden hamster models, the relative bioavailability was increased by 191.54%, and the absolute bioavailability was 82.20%. In summary, this study provides evidence that this innovative CCS-PVA-TPP-FSM@HMSNs films could be a promising and industrialized buccal drug delivery system.

Design, characterization and in vivo performance of solid lipid nanoparticles (SLNs)-loaded mucoadhesive buccal tablets for efficient delivery of Lornoxicam in experimental inflammation

Lornoxicam (LRX) is a potent nonsteroidal anti-inflammatory drug (NSAID) used extensively to manage pain and inflammatory conditions. However, the drug possesses poor aqueous solubility (i.e., BCS class II) and a short half-life (3-4 h). Mucoadhesive buccal tablets containing LRX -loaded solid lipid nanoparticles (SLNs) were developed to enhance the drug solubility and bioavailability and achieve a controlled release pattern for a better anti-inflammatory effect. Different LRX-loaded SLNs were prepared using the hot homogenization /ultra-sonication technique and evaluated using size analysis and entrapment efficiency (EE%). Optimized LRX -loaded SLNs formulation showed particle size of 216 ± 7.4 nm, zeta potential of -27.3 ± 4.6 mV, and entrapment efficiency of 92.56 ± 2.3 %. Dried LRX-loaded SLNs alongside mucoadhesive polymers blend (PVP K30 /HPMC K15) were compressed to prepare the mucoadhesive buccal tablets. The tablets showed proper physicochemical properties, good mucoadhesive strength, long mucoadhesive time, suitable pH surface, good swelling capacity, and controlled drug release profile. Furthermore, Fourier transform-infrared (FTIR) spectroscopy, Powder X-Ray diffraction (PXRD), and Scanning electron microscopy (SEM) studies were carried out. The in vivo anti-inflammatory effect of pure LRX, market LRX and optimized mucoadhesive buccal tablet of LRX -loaded SLNs (T3) against carrageenan-induced models were evaluated. T3 showed a significant and early anti-inflammatory response after 1 and 2 h (63.62-77.84 % inhibition) as well as an extended effect after 4 h as compared to pure and market LRX. In parallel, T3 showed the best amelioration of PGE2, COX2, and TNF-α serum levels after 4 h of carrageenan injection.

Molecular Mapping of Antifungal Mechanisms Accessing Biomaterials and New Agents to Target Oral Candidiasis

Oral candidiasis has a high rate of development, especially in immunocompromised patients. Immunosuppressive and cytotoxic therapies in hospitalized HIV and cancer patients are known to induce the poor management of adverse reactions, where local and systemic candidiasis become highly resistant to conventional antifungal therapy. The development of oral candidiasis is triggered by several mechanisms that determine oral epithelium imbalances, resulting in poor local defense and a delayed immune system response. As a result, pathogenic fungi colonies disseminate and form resistant biofilms, promoting serious challenges in initiating a proper therapeutic protocol. Hence, this study of the literature aimed to discuss possibilities and new trends through antifungal therapy for buccal drug administration. A large number of studies explored the antifungal activity of new agents or synergic components that may enhance the effect of classic drugs. It was of significant interest to find connections between smart biomaterials and their activity, to find molecular responses and mechanisms that can conquer the multidrug resistance of fungi strains, and to transpose them into a molecular map. Overall, attention is focused on the nanocolloids domain, nanoparticles, nanocomposite synthesis, and the design of polymeric platforms to satisfy sustained antifungal activity and high biocompatibility with the oral mucosa.

Natural Products for the Prevention and Treatment of Oral Mucositis-A Review

Cancer, a major world public health problem, is associated with chemotherapy treatments whose administration leads to secondary concerns, such as oral mucositis (OM). The OM disorder is characterized by the presence of ulcers in the oral mucosa that cause pain, bleeding, and difficulty in ingesting fluids and solids, or speaking. Bioactive compounds from natural sources have arisen as an effective approach for OM. This review aims to summarize the new potential application of different natural products in the prevention and treatment of OM in comparison to conventional ones, also providing a deep insight into the most recent clinical studies. Natural products, such as Aloe vera, Glycyrrhiza glabra, Camellia sinensis, Calendula officinalis, or honeybee crops, constitute examples of sources of bioactive compounds with pharmacological interest due to their well-reported activities (e.g., antimicrobial, antiviral, anti-inflammatory, analgesic, or wound healing). These activities are associated with the bioactive compounds present in their matrix (such as flavonoids), which are associated with in vivo biological activities and minimal or absent toxicity. Finally, encapsulation has arisen as a future opportunity to preserve the chemical stability and the drug bioa vailability of bioactive compounds and, most importantly, to improve the buccal retention period and the therapeutic effects.

Recent Advancements and Patents on Buccal Drug Delivery Systems: A Comprehensive Review

The major requirement for a dosage form to be successful is its ability to penetrate the site of application and the bioavailability of the drug released from the dosage form. The buccal drug delivery is an influential route to deliver the drug into the body. Here, in this context, various novel approaches that include lipoidal carriers like ethosomes, transferosomes, niosomes etc. and electrospun nanofibers are discussed, with respect to buccal drug delivery. These carriers can be easily incorporated into buccal dosage forms like patches and gels that are responsible for increased permeation across the buccal epithelium. The in vivo methods of evaluation on animal models are conscribed here. The novel biocarriers of lipoidal and non-lipoidal nature can be utilized by loading the drug into them, which are helpful in preventing drug degradation and other drawbacks as compared to conventional formulations. The globally patented buccal formulations give us a wide context in literature about the patents filed and granted in the recent years. When it comes to patient compliance, age is an issue, which is also solved by the buccal route. The pediatric buccal formulations are researched for the customization to be delivered to children. Diseases like mouth ulcers, oral cancer, Parkinson's disease, aphthous stomatitis etc. have been successfully treated through the buccal route, which infers that the buccal drug delivery system is an effective and emerging area for formulation and development in the field of pharmaceutics.

Permeability of Buccal Mucosa

The buccal mucosa provides an alternative route of drug delivery that can be more beneficial compared to other administration routes. Although numerous studies and reviews have been published on buccal drug delivery, an extensive review of the permeability data is not available. Understanding the buccal mucosa barrier could provide insights into the approaches to effective drug delivery and optimization of dosage forms. This paper provides a review on the permeability of the buccal mucosa. The intrinsic permeability coefficients of porcine buccal mucosa were collected. Large variability was observed among the published permeability data. The permeability coefficients were then analyzed using a model involving parallel lipoidal and polar transport pathways. For the lipoidal pathway, a correlation was observed between the permeability coefficients and permeant octanol/water partition coefficients (Kow) and molecular weight (MW) in a subset of the permeability data under specific conditions. The permeability analysis suggested that the buccal permeation barrier was less lipophilic than octanol. For the polar pathway and macromolecules, a correlation was observed between the permeability coefficients and permeant MW. The hindered transport analysis suggested an effective pore radius of 1.5 to 3 nm for the buccal membrane barrier.

Electrosprayed Nanoparticles as Drug Delivery systems for Biomedical Applications

BACKGROUND

Nanotechnology is a tool being used intensely in the area of drug delivery systems in the biomedical field. Electrospraying is one of the nanotechnological methods, which is growing due to its importance in the development of nanoparticles comprising bioactive compounds. It is helpful in improving the efficacy, reducing side effects of active drug elements, and is useful in targeted drug delivery. When compared to other conventional methods like nanoprecipitation, emulsion diffusion, and double emulsification, electrospraying offers better advantages to produce micro/nanoparticles due to its simplicity, cost-effectiveness, and single-step process.

OBJECTIVE

The aim of this paper is to highlight the use of electrosprayed nanoparticles for biomedical applications.

METHODS

We conducted a literature review on the usage of natural and synthetic materials to produce nanoparticles, which can be used as a drug delivery system for medical purposes.

RESULTS

We summarized a possible key role of electrosprayed nanoparticles in different therapeutic applications (tissue regeneration, cancer).

CONCLUSION

The modest literature production denotes that further investigation is needed to assess and validate the promising role of drug-loaded nanoparticles through the electrospraying process as noninvasive materials in the biomedical field.

An Updated Overview of the Emerging Role of Patch and Film-Based Buccal Delivery Systems

Buccal mucosal membrane offers an attractive drug-delivery route to enhance both systemic and local therapy. This review discusses the benefits and drawbacks of buccal drug delivery, anatomical and physiological aspects of oral mucosa, and various in vitro techniques frequently used for examining buccal drug-delivery systems. The role of mucoadhesive polymers, penetration enhancers, and enzyme inhibitors to circumvent the formulation challenges particularly due to salivary renovation cycle, masticatory effect, and limited absorption area are summarized. Biocompatible mucoadhesive films and patches are favored dosage forms for buccal administration because of flexibility, comfort, lightness, acceptability, capacity to withstand mechanical stress, and customized size. Preparation methods, scale-up process and manufacturing of buccal films are briefed. Ongoing and completed clinical trials of buccal film formulations designed for systemic delivery are tabulated. Polymeric or lipid nanocarriers incorporated in buccal film to resolve potential formulation and drug-delivery issues are reviewed. Vaccine-enabled buccal films have the potential ability to produce both antibodies mediated and cell mediated immunity. Advent of novel 3D printing technologies with built-in flexibility would allow multiple drug combinations as well as compartmentalization to separate incompatible drugs. Exploring new functional excipients with potential capacity for permeation enhancement of particularly large-molecular-weight hydrophilic drugs and unstable proteins, oligonucleotides are the need of the hour for rapid advancement in the exciting field of buccal drug delivery.

Current Status of Mucoadhesive Gel Systems for Buccal Drug Delivery

BACKGROUND

Buccal drug delivery is a fascinating research field. Gel-based formulations present potent characteristics as buccal systems since they have great physicochemical properties.

METHODS

Among the various gels, in situ gels are viscous colloidal systems consisting of polymers; when physiological conditions change (pH, temperature, ion activation), they are transformed into the gel phase. These systems can improve bioavailability. Other systems, such as nanogels or emulgels can also be applied for buccal delivery with promising results. Polymeric gel-based systems can be produced by natural, semisynthetic, and synthetic polymers. Their main advantage is that the active molecules can be released in a sustained and controllable manner. Several gels based on chitosan are produced for the entrapment of drugs demonstrating efficient retention time and bioavailability due to chitosan mucoadhesion. Besides polysaccharides, poloxamers and carbopol are also used in buccal gels due to their high swelling ability and reversed thermal gelation behavior.

RESULTS

Herein, the authors focused on the current development of mucoadhesive gel systems used in buccal drug delivery. After explaining buccal drug delivery and mucoadhesion, various studies with hydrogels, in situ gels, and nanogels were analyzed as buccal gel systems. Various mucoadhesive gel studies with mucoadhesive polymers have been studied and summarized. This review is presented as valuable guidance to scientists in formulating buccal mucoadhesive drug delivery systems.

CONCLUSION

This review aimed to assist researchers working on buccal drug delivery by summarizing buccal drug delivery, mucoadhesion, and buccal mucoadhesive gel systems recently found in the literature.

Nanoparticles in Dentistry: A Comprehensive Review

In recent years, nanoparticles (NPs) have been receiving more attention in dentistry. Their advantageous physicochemical and biological properties can improve the diagnosis, prevention, and treatment of numerous oral diseases, including dental caries, periodontal diseases, pulp and periapical lesions, oral candidiasis, denture stomatitis, hyposalivation, and head, neck, and oral cancer. NPs can also enhance the mechanical and microbiological properties of dental prostheses and implants and can be used to improve drug delivery through the oral mucosa. This paper reviewed studies from 2015 to 2020 and summarized the potential applications of different types of NPs in the many fields of dentistry.

Recent advances of oral film as platform for drug delivery

Orally drug delivery film has received extensive interest duo to a distinct set of its advantageous properties compared to the traditional orally administered dosages, including faster rate of drug absorption, higher bioavailability and better patient compliance for children and elders with swallowing deficiencies. In particular, its potential capacity of delivering proteins and peptides has further attracted great attention. Lately, tremendous advances have been made in designing and developing both novel mucoadhesive films and orodispersible films to fulfill specific accomplishments of drug delivery. This review aims to summarize those newly developed oral films, discussing their formulation strategies, manufacturing methods as well as advantages and limitations thereof. Conclusions and future perspectives are also provided in brief.

Importance of Nanoparticles for the Delivery of Antiparkinsonian Drugs

Parkinson's disease (PD) affects around ten million people worldwide and is considered the second most prevalent neurodegenerative disease after Alzheimer's disease. In addition, there is a higher risk incidence in the elderly population. The main PD hallmarks include the loss of dopaminergic neurons and the development of Lewy bodies. Unfortunately, motor symptoms only start to appear when around 50-70% of dopaminergic neurons have already been lost. This particularly poses a huge challenge for early diagnosis and therapeutic effectiveness. Actually, pharmaceutical therapy is able to relief motor symptoms, but as the disease progresses motor complications and severe side-effects start to appear. In this review, we explore the research conducted so far in order to repurpose drugs for PD with the use of nanodelivery systems, alternative administration routes, and nanotheranostics. Overall, studies have demonstrated great potential for these nanosystems to target the brain, improve drug pharmacokinetic profile, and decrease side-effects.

Nano-sized Solid Dispersions for Improving the Bioavailability of Poorly Water-soluble Drugs

It has been well established that solid dispersions have a high potential to increase the release rate of poorly water-soluble drugs, resulting in high drug bioavailability. Solid dispersions have been vigorously investigated with various practical approaches in recent decades. Improvements in wettability, molecular interactions and drugs being held in an amorphous state in solid dispersions are the main mechanisms underlying the high drug release rate. Moreover, the synergistic effect of incorporating nanotechnology in solid dispersions is expected to lead to an advanced drug delivery system for poorly water-soluble drugs. However, to date, there is still a lack of reviews providing outlooks on the nano-sized solid dispersions that have been substantially investigated for improving the bioavailability of poorly water-soluble drugs. In the current review, we aim to overview key advantages and approaches for producing nano-sized solid dispersions. The classification of key strategies in developing nano-sized solid dispersions will advance the creation of even more efficient solid dispersions, which will translate into clinical studies.

Expert design and optimization of a novel buccoadhesive blend film impregnated with metformin nanoparticles

Aim: The purpose of this study was to design a metformin nanoparticles (NPs)-loaded buccoadhesive film for enhanced drug bioavailability. Materials & methods: The NPs were prepared and incorporated into a hydroxypropyl methylcellulose-chitosan blend film. Three levels of a three-factor, Box-Behnken design were used to evaluate the critical formulation variables. The drug permeation was also examined using sheep buccal mucosa. Results & conclusion: The results verified the formation of spherical NPs with an average size of 177.8 ± 6.42 nm and entrapment efficiency of 78.03 ± 0.23%. The optimum conditions for nanofilms were predicted to be: hydroxypropyl methylcellulose (700 mg), glycerol (50 mg) and chitosan (0.15 %w/v). The nanofilm showed a high drug permeation within 6 h. The metformin nanofilm offers an excellent opportunity for buccal drug delivery.

Developmental Strategies of Curcumin Solid Dispersions for Enhancing Bioavailability

BACKGROUND

Although curcumin has been demonstrated to be beneficial in treating various diseases, its low solubility, chemical stability and bioavailability limit its application, especially in cancer therapy.

METHODS

Solid dispersions have been utilized in the last few decades to improve the bioavailability and stability of curcumin.

RESULTS

However, there is a lack of summaries and classifications of the methods for preparing curcumin with this technology. The current review aims to overview the strategies used to develop solid dispersions containing curcumin for improving drug delivery. The classification of techniques for creating solid dispersions for curcumin was summarized, including systems for protecting curcumin degradation despite its chemical stability. The applications of advanced nanotechnologies in recent studies of solid dispersions were also discussed to explain the roles of nanoparticles in formulations.

CONCLUSION

This overview of recent developments in formulating solid dispersions for improving curcumin bioavailability will contribute to future studies of curcumin for clinical development.