Electrospun vancomycin-loaded nanofibers for management of methicillin-resistant Staphylococcus aureus-induced skin infections

Electrospun Cellulose Acetate/Poly(Vinyl Alcohol) Nanofibers Loaded with Methyl Gallate and Gallic Acid for Anti-Staphylococcus aureus Applications

Methyl gallate (MG) and gallic acid (GA) are natural compounds with potent activity against methicillin-resistant Staphylococcus aureus (MRSA), a significant global health concern. In this study, MG and GA were incorporated into cellulose acetate (CA) blended with poly(vinyl alcohol) (PVA) to create electrospun nanofibers aimed at combating both methicillin-susceptible S. aureus (MSSA) and MRSA. Key electrospinning parameters-DC voltage, injection flow rate, and syringe tip-collector distance-were optimized, with the best conditions being a 1.5 mL/h flow rate, 30 cm distance, and 20 kV voltage. The resulting nanofiber mats were characterized by SEM, FTIR, DSC, tensile strength testing, contact angle measurement, swelling behavior, and release profiling. Antibacterial properties were assessed using the agar diffusion test. The obtained nanofibers had diameters ranging from 879.33 to 906.13 nm. Among the samples, MG-GA-CA/PVA exhibited the highest tensile strength, good flexibility, and improved stiffness, which was related to enhanced thermal stability and chemical interactions as shown by DSC and FTIR analyses. This formulation also displayed excellent hydrophilicity, swelling properties, and a consistent release profile over 8 to 24 h. Furthermore, MG-GA-CA/PVA showed superior antibacterial activity against both MSSA and MRSA, suggesting its potential as a strong, flexible, and effective anti-S. aureus material.

Dual phage-incorporated electrospun polyvinyl alcohol-eudragit nanofiber matrix for rapid healing of diabetic wound infected by Pseudomonas aeruginosa and Staphylococcus aureus

Diabetic wound healing remains a healthcare challenge due to co-occurring multidrug-resistant (MDR) bacterial infections and the constraints associated with sustained drug delivery. Here, we integrate two new species of phages designated as PseuPha1 and RuSa1 respectively lysing multiple clinical MDR strains of P. aeruginosa and S. aureus into a novel polyvinyl alcohol-eudragit (PVA-EU†) nanofiber matrix through electrospinning for rapid diabetic wound healing. PVA-EU† evaluated for characteristic changes that occurred due to electrospinning and subjected to elution, stability and antibacterial assays. The biocompatibility and wound healing ability of PVA-EU† were assessed through mouse fibroblast cell line NIH3T3, followed by validation through diabetic mice excision wound co-infected with P. aeruginosa and S. aureus. The electrospinning resulted in the incorporation of ~ 75% active phages at PVA-EU†, which were stable at 25 °C for 30 days and at 4 °C for 90 days. PVA-EU† showed sustained release of phages for 18 h and confirmed to be detrimental to both mono- and mixed-cultures of target pathogens. The antibacterial activity of PVA-EU† remained unaltered in the presence of high amounts of glucose, whereas alkaline pH promoted the activity. The matrix exerted no cytotoxicity on NIH3T3, but showed significant (p < 0.0001) wound healing in vitro and the process was rapid as validated through a diabetic mice model. The sustained release, quick wound closure, declined abundance of target MDR bacteria in situ and histopathological signs of recovery corroborated the therapeutic efficacy of PVA-EU†. Taken together, our data signify the potential application of PVA-EU† in the rapid treatment of diabetic wounds without the aid of antibiotics.

Electrospun Tamarindus indica-loaded antimicrobial PMMA/cellulose acetate/PEO nanofibrous scaffolds for accelerated wound healing: In-vitro and in-vivo assessments

In this work, Tamarindus indica (T. indica)-loaded crosslinked poly(methyl methacrylate) (PMMA)/cellulose acetate (CA)/poly(ethylene oxide) (PEO) electrospun nanofibers were designed and fabricated for wound healing applications. T. indica is a plant extract that possesses antidiabetic, antimicrobial, antioxidant, antimalarial and wound healing properties. T. indica leaves extract of different concentrations were blended with a tuned composition of a matrix comprised of PMMA (10 %), CA (2 %) and PEO (1.5 %), and were electrospun to form smooth, dense and continuous nanofibers as illustrated by SEM investigation. In vitro evaluation of T. indica-loaded nanofibers on normal human skin fibroblasts (HBF4) revealed a high compatibility and low cytotoxicity. T. indica-loaded nanofibers significantly increased the healing activity of scratched HBF4 cells, as compared to the free plant extract, and the healing activity was significantly enhanced upon increasing the plant extract concentration. Moreover, T. indica-loaded nanofibers demonstrated significant antimicrobial activity in vitro against the tested microbes. In vivo, nanofibers resulted in a superior wound healing efficiency compared to the control untreated animals. Hence, engineered nanofibers loaded with potent phytochemicals could be exploited as an effective biocompatible and eco-friendly antimicrobial biomaterials and wound healing composites.

In vitro and in vivo studies of Syzygium cumini-loaded electrospun PLGA/PMMA/collagen nanofibers for accelerating topical wound healing

This work aims to develop plant extract-loaded electrospun nanofiber as an effective wound dressing scaffolds for topical wound healing. Electrospun nanofibers were fabricated from Syzygium cumini leaf extract (SCLE), poly(lactic-co-glycolic acid) (PLGA), poly(methyl methacrylate) (PMMA), collagen and glycine. Electrospinning conditions were optimized to allow the formation of nanosized and uniform fibers that display smooth surface. Morphology and swelling behavior of the formed nanofibers were studied. In addition, the antibacterial activity of the nanofibers against multidrug-resistant and human pathogens was assessed by agar-well diffusion. Results showed that nanofibers containing Syzygium cumini extract at concentrations of 0.5 and 1% w/v exhibited greater antibacterial activity against the tested Gram-positive (i.e., Staphylococcus aureus, Candida albicans, Candida glabrata and Bacillus cereus) and Gram-negative (i.e., Salmonella paratyphi and Escherichia coli) pathogens compared to the same concentrations of the plain extract. Furthermore, in vivo wound healing was evaluated in Wistar rats over a period of 14 days. In vivo results demonstrated that nanofiber mats containing SCLE and collagen significantly improved wound healing within two weeks, compared to the control untreated group. These findings highlight the potential of fabricated nanofibers in accelerating wound healing and management of topical acute wounds.

Biodegradable electrospun fibers as sustained-release carriers of insect pheromones for field trapping of Spodoptera litura (Lepidoptera: Noctuidae)

BACKGROUND

Insect pheromones are highly effective and environmentally friendly, and are widely used in the monitoring and trapping of pests. However, many researchers have found that various factors such as ultraviolet light and temperature in the field environment can accelerate the volatilization of pheromones, thus affecting the actual control effect. In recent years, electrospinning technology has demonstrated remarkable potential in the preparation of sustained carriers. Moreover, the utilization of biodegradable materials in electrospinning presents a promising avenue for the advancement of eco-friendly carriers.

RESULTS

In this study, homogeneous and defect-free pheromone carriers were obtained by electrospinning using fully biodegradable polyhydroxybutyrate materials and pheromones of Spodoptera litura. The electrospun fibers with porous structure could continuously release pheromone (the longest can be ≤80 days). They also had low light transmission, hydrophobic protection. More importantly, the pheromone-loaded electrospun fiber carriers showed stable release and good trapping effect in the field. They could trap pests for at least 7 weeks in the field environment without other light stabilizers added.

CONCLUSION

Sustained-release carriers constructed by electrospinning and green materials could improve the efficacy of pheromones and ensure environmental friendliness, and provided a tool for the management of S. litura and other pests and sustainable development of agricultural. © 2023 Society of Chemical Industry.

Electrospun PCL Wires Loaded with Vancomycin on Zirconium Substrate

The current study presents research about electrodeposition in relation to electrospinning PCL wires on a Zr substrate and loading the coating with vancomycin. The structural composition of the coatings was investigated via FT-IR analysis. The morphology evaluated using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, for the composition (SEM-EDS), evidenced the presence of the polymer wires, with and without drug vancomycin loading. The wettability of the coatings was evaluated from the hydrophobic-hydrophilic point of view, and the characterization was completed with mechanical and electrochemical tests. All the electrochemical tests performed in simulated body fluid highlighted that PCL represents a barrier against corrosion processes. The quantitative method to evaluate the loading efficiency shows that almost 80% of the total loaded vancomycin is released within 144 h; after the initial burst at 24 h, a steady release of vancomycin is observed over 7 days. A kinetic model of the drug release was also constructed.

Development of dual-functional core-shell electrospun mats with controlled release of anti-inflammatory and anti-bacterial agents for the treatment of corneal alkali burn injuries

In this study, a novel dual-drug carrier for the co-administration of an anti-inflammatory and antibiotic agent consisting of core-shell nanofibers for the treatment of cornea alkali burns was designed. The core-shell nanofibers were prepared via coaxial electrospinning of curcumin-loaded silk fibroin as the core and vancomycin-loaded chitosan/polyvinyl alcohol (PVA) as the shell. Electron microscopy (SEM and TEM) images confirmed the preparation of smooth, bead-free, and continuous fibers that formed clear core-shell structures. For further studies, nanofiber mats were cross-linked by heat treatment to avoid rapid disintegration in water and improve both mechanical properties and drug release. The release profile of curcumin and vancomycin indicated an initial burst release, continued by the extended release of both drugs within 72 hours. Rabbit corneal cells demonstrated high rates of proliferation when evaluated using a cell metabolism assay. Finally, the therapeutic efficiency of core/shell nanofibers in healing cornea alkali burn was studied by microscopic and macroscopic observation, fluorescence staining, and hematoxylin-eosin assay on rabbit eyes. The anti-inflammatory activity of fabricated fibers was evaluated by enzyme-linked immunosorbent assay and Immunofluorescence analysis. In conclusion, using a robust array of in vitro and in vivo experiments this study demonstrated the ability of the dual-drug carriers to promote corneal re-epithelialization, minimize inflammation, and inhibit corneal neovascularization. Since these parameters are critical to the healing of corneal wounds from alkali burns, we suggest that this discovery represents a promising future therapeutic agent that warrants further study in humans.

Recent Advances in Functional Wound Dressings

Significance: Nowadays, the wound dressing is no longer limited to its primary wound protection ability. Hydrogel, sponge-like material, three dimensional-printed mesh, and nanofiber-based dressings with incorporation of functional components, such as nanomaterials, growth factors, enzymes, antimicrobial agents, and electronics, are able to not only prevent/treat infection but also accelerate the wound healing and monitor the wound-healing status. Recent Advances: The advances in nanotechnologies and materials science have paved the way to incorporate various functional components into the dressings, which can facilitate wound healing and monitor different biological parameters in the wound area. In this review, we mainly focus on the discussion of recently developed functional wound dressings. Critical Issues: Understanding the structure and composition of wound dressings is important to correlate their functions with the outcome of wound management. Future Directions: "All-in-one" dressings that integrate multiple functions (e.g., monitoring, antimicrobial, pain relief, immune modulation, and regeneration) could be effective for wound repair and regeneration.

Evolving Trends in Nanofibers for Topical Delivery of Therapeutics in Skin Disorders

Nanotechnology has yielded nanostructure-based drug delivery approaches, among which nanofibers have been explored and researched for the potential topical delivery of therapeutics. Nanofibers are filaments or thread-like structures in the nanometer size range that are fabricated using various polymers, such as natural or synthetic polymers or their combination. The size or diameter of the nanofibers depends upon the polymers, the techniques of preparation, and the design specification. The four major processing techniques, phase separation, self-assembly, template synthesis, and electrospinning, are most commonly used for the fabrication of nanofibers. Nanofibers have a unique structure that needs a multimethod approach to study their morphology and characterization parameters. They are gaining attention as drug delivery carriers, and the substantially vast surface area of the skin makes it a potentially promising strategy for topical drug products for various skin disorders such as psoriasis, skin cancers, skin wounds, bacterial and fungal infections, etc. However, the large-scale production of nanofibers with desired properties remains challenging, as the widely used electrospinning processes have certain limitations, such as poor yield, use of high voltage, and difficulty in achieving in situ nanofiber deposition on various substrates. This review highlights the insights into fabrication strategies, applications, recent clinical trials, and patents of nanofibers for different skin disorders in detail. Additionally, it discusses case studies of its effective utilization in the treatment of various skin disorders for a better understanding for readers.

Topical Nanotherapeutics for Treating MRSA-Associated Skin and Soft Tissue Infection (SSTIs)

The emergence of methicillin-resistant Staphylococcus aureus (MRSA) imposes a major challenge for the treatment of infectious diseases with existing antibiotics. MRSA associated with superficial skin and soft tissue infections (SSTIs) is one of them, affecting the skin's superficial layers, and it includes impetigo, folliculitis, cellulitis, furuncles, abscesses, surgical site infections, etc. The efficient care of superficial SSTIs caused by MRSA necessitates local administration of antibiotics, because oral antibiotics does not produce the required concentration at the local site. The topical administration of nanocarriers has been emerging in the area of drug delivery due to its advantages over conventional topical formulation. It enhances the solubility and permeation of the antibiotics into deeper layer of the skin. Apart from this, antibiotic resistance is something that needs to be combated on multiple fronts, and antibiotics encapsulated in nanocarriers help to do so by increasing the therapeutic efficacy in a number of different ways. The current review provides an overview of the resistance mechanism in S. aureus as well as various nanocarriers reported for the effective management of MRSA-associated superficial SSTIs.

Improving the Bioactivity of Norfloxacin with Tablets Made from Paper

(1) Background: Many drugs possess poor bioavailability, and many strategies are available to overcome this issue. In this study, smartFilm technology, i.e., a porous cellulose matrix (paper), in which the active compound can be loaded onto in an amorphous state was utilised for oral administration to improve the solubility and bioactivity of a poorly soluble BSC class IV antibiotic. (2) Methods: Norfloxacin was used as the model drug and loaded into commercially available paper. The resulting norfloxacin-loaded smartFilms were transformed into smartFilm granules via wet granulation and the resulting norfloxacin-loaded smartFilm granules were transformed into norfloxacin-loaded tablets made from paper, i.e., smartFilm tablets. The crystalline state of norfloxacin was investigated, as well as the pharmaceutical properties of the granules and the tablets. The bioactivity of the smartFilm tablets was assessed in vitro and ex vivo to determine the antibacterial activity of norfloxacin. The results were compared to a physical mixture tablet that contained non-loaded paper granules and equal amounts of norfloxacin as a crystalline powder. (3) Results: Norfloxacin-loaded smartFilm granules and norfloxacin-loaded smartFilm tablets contained norfloxacin in an amorphous state, which resulted in an improved and faster release of norfloxacin when compared to the physical mixture tablet. The bioactivity was up to three times higher when compared to the physical mixture tablet. The ex vivo model was demonstrated to be a useful tool that allows for a fast and cost-effective discrimination between "good" and "bad" formulations. It provides realistic physiological conditions and can therefore yield meaningful, additional biopharmaceutical information that cannot be assessed in classical in vitro experiments. (4) Conclusions: smartFilm tablets are a promising, universal, industrially feasible and cost-effective formulation strategy for improved solubility and enhanced bioactivity of poorly soluble drugs.

Electrospun fibers as carriers for topical drug delivery and release in skin bandages and patches for atopic dermatitis treatment

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Conformationally restricted, dipeptide-based, self-assembled nanoparticles for efficient vancomycin delivery

Aim: Emergence of vancomycin (Van) resistance, and usage of its higher dose and short half-life are posing a serious concern. Slow and sustained release of Van using a nanodelivery system may overcome these problems. Materials & methods: Arginine-α,β-dehydrophenylalanine (RΔF) was synthesized using solution-phase synthesis which self-assembled into nanospheres. Van was entrapped in the nanoparticles (NPs). In vitro and in vivo efficacy of Van-RΔF was determined using broth microdilution and the mouse thigh infection model, respectively. Results & conclusion: Van-RΔF NPs efficiently inhibited bacterial growth (Staphylococcus aureus), while Van alone showed limited growth inhibition in in vitro. Intravenous administration of Van-RΔF in mice with bacterial thigh infection showed enhanced efficacy (double) compared with Van alone, which indicates its high potential for further development.

Antibacterial activity of lysozyme-loaded cream against MRSA and promotion of scalded wound healing

Staphylococcus aureus (S. aureus) infection, especially its drug-resistant bacterial infection, is a great challenge often faced by clinicians and patients, and it is also one of the most important threats to public health. Finding a safe and effective antibacterial agent is of great significance for the prevention and treatment of S. aureus infection. Lysozyme is known to have antibacterial effects against Gram-positive bacteria including S. aureus. Here, high-quality lysozyme with a purity of more than 99% and an activity of more than 60, 000 U/mg was prepared from egg white, which showed excellent antibacterial activity against three strains of S. aureus, especially against MRSA. Furthermore, an antibacterial cream loaded with lysozyme was prepared and tested in scald wound healing. The lysozyme-loaded cream exhibited the effect of preventing wound infection and promoting wound healing on scalds, and no toxicity was found in animal organs. Overall, lysozyme showed great application potential in the prevention and treatment of infections caused by S. aureus and scalded wound healing. The most remarkable discovery in this work is the unexpectedly powerful inhibitory effect of lysozyme on the drug-resistant bacterial, especially MRSA, which is usually very difficult to deal with using normal antibacterial drugs.

Wearable adjunct ozone and antibiotic therapy system for treatment of Gram-negative dermal bacterial infection

The problematic combination of a rising prevalence of skin and soft tissue infections and the growing rate of life-threatening antibiotic resistant infections presents an urgent, unmet need for the healthcare industry. These evolutionary resistances originate from mutations in the bacterial cell walls which prevent effective diffusion of antibiotics. Gram-negative bacteria are of special consideration due to the natural resistance to many common antibiotics due to the unique bilayer structure of the cell wall. The system developed here provides one solution to this problem through a wearable therapy that delivers and utilizes gaseous ozone as an adjunct therapy with topical antibiotics through a novel dressing with drug-eluting nanofibers (NFs). This technology drastically increases the sensitivity of Gram-negative bacteria to common antibiotics by using oxidative ozone to bypass resistances created by the bacterial cell wall. To enable simple and effective application of adjunct therapy, ozone delivery and topical antibiotics have been integrated into a single application patch. The drug delivery NFs are generated via electrospinning in a fast-dissolve PVA mat without inducing decreasing gas permeability of the dressing. A systematic study found ozone generation at 4 mg/h provided optimal ozone levels for high antimicrobial performance with minimal cytotoxicity. This ozone treatment was used with adjunct therapy delivered by the system in vitro. Results showed complete eradication of Gram-negative bacteria with ozone and antibiotics typically used only for Gram-positive bacteria, which showed the strength of ozone as an enabling adjunct treatment option to sensitize bacteria strains to otherwise ineffective antibiotics. Furthermore, the treatment is shown through biocompatibility testing to exhibit no cytotoxic effect on human fibroblast cells.

Design of nanoconstructs that exhibit enhanced hemostatic efficiency and bioabsorbability

Hemorrhage is a prime cause of death in civilian and military traumatic injuries, whereby a significant proportion of death and complications occur prior to paramedic arrival and hospital resuscitation. Hence, it is crucial to develop hemostatic materials that are able to be applied by simple processes and allow control over bleeding by inducing rapid hemostasis, non-invasively, until subjects receive necessary medical care. This tutorial review discusses recent advances in synthesis and fabrication of degradable hemostatic nanomaterials and nanocomposites. Control of assembly and fine-tuning of composition of absorbable (i.e., degradable) hemostatic supramolecular structures and nanoconstructs have afforded the development of smart devices and scaffolds capable of efficiently controlling bleeding while degrading over time, thereby reducing surgical operation times and hospitalization duration. The nanoconstructs that are highlighted have demonstrated hemostatic efficiency pre-clinically in animal models, while also sharing characteristics of degradability, bioabsorbability and presence of nano-assemblies within their compositions.

ELECTROSPUN SODIUM ALGINATE/POLY(ETHYLENE OXIDE) NANOFIBERS FOR WOUND HEALING APPLICATIONS: CHALLENGES AND FUTURE DIRECTIONS

Alginate is an interesting natural biopolymer to be considered for biomedical applications due to its advantages and good biological properties. These biological properties make electrospun alginate nanofibers suitable for various uses in the biomedical field, such as wound healing dressings, drug delivery systems, or both. Unfortunately, the fabrication of alginate nanofibers by electrospinning is very challenging because of the high viscosity of the solution, high surface tension and rigidity in water due to hydrogen bonding, and also their diaxial linkages. This review presents an overview of the factors affecting the electrospinning process of sodium alginate/poly(ethylene oxide) (SA/PEO), the application of SA/PEO in drug delivery systems for wound healing applications, and the degradation and swelling properties of SA/PEO. The challenges and future directions of SA/PEO in the medical field are also discussed.

Development of potent nanosized isatin-isonicotinohydrazide hybrid for management of Mycobacterium tuberculosis

Inspired by the antitubercular activity of isoniazid (INH) and 5-bromoisatin, isatin-INH hybrid (WF-208) has been synthesized as a potent agent against multidrug-resistant (MDR) and extensively drug-resistant (XDR) strains of M. tuberculosis. In silico molecular docking studies indicated that DprE1, a critical enzyme in the synthesis of M. tuberculosis cell wall, is a potential enzymatic target for WF-208. The synthesized WF-208 was incorporated into a nanoparticulate system to enhance stability of the compound and to sustain its antimicrobial effect. Nanosized spherical niosomes (hydrodynamic diameter of ca. 500-600 nm) could accommodate WF-208 at a high encapsulation efficiency of 74.2%, and could impart superior stability to the compound in simulated gastric conditions. Interestingly, WF-208 had minimal inhibitory concentrations (MICs) of 7.8 and 31.3 µg/mL against MDR and XDR M. tuberculosis, respectively, whereas INH failed to demonstrate bacterial growth inhibition at the range of the tested concentrations. WF-208-loaded niosomes exhibited a 4-fold increase in the anti-mycobacterial activity as compared to the free compound (MIC of 1.9 vs. 7.8 µg/mL) against H37Rv M. tuberculosis, after three weeks of incubation with WF-208-loaded niosomes. Incorporation of the compound into nanosized vesicles allowed for a further increase in stability, potency and sustainability of the anti-mycobacterial activity, thus, providing a promising strategy for management of tuberculosis.

Development of Sedative Dexmedetomidine Sublingual In Situ Gels: In Vitro and In Vivo Evaluations

Intravenous dexmedetomidine (DEX) is currently approved by the FDA for the sedation of intubated patients in intensive care units to reduce anxiety and to augment postoperative analgesia. Bradycardia and hypotension are limitations associated with the intravenous administration of DEX. In this study, DEX sublingual in situ gels were developed and assessed for their pH, gelling capacity, viscosity, mucoadhesion and in vitro drug release. The optimized gelling system demonstrated enhanced mucoadhesion, superior gelling capacity, reasonable pH and optimal rheological profile. In vivo, compared to the oral solution, the optimal sublingual gel resulted in a significant higher rate and extent of bioavailability. Although the in situ gel had comparable plasma levels to those observed following intravenous administration, significant amelioration of the systemic adverse reactions were attained. As demonstrated by the hot plate method, a sustained duration of analgesia in rats was observed after sublingual administration of DEX gel compared to the intravenously administered DEX solution. Furthermore, no changes in systolic blood pressure and heart rate were recorded in rats and rabbits, respectively, after sublingual administration of DEX. Sublingual administration of DEX in situ gel provides a promising approach for analgesia and sedation, while circumventing the reported adverse reactions associated with intravenous administration of DEX.

Tailoring of Novel Azithromycin-Loaded Zinc Oxide Nanoparticles for Wound Healing

Skin is the largest mechanical barrier against invading pathogens. Following skin injury, the healing process immediately starts to regenerate the damaged tissues and to avoid complications that usually include colonization by pathogenic bacteria, leading to fever and sepsis, which further impairs and complicates the healing process. So, there is an urgent need to develop a novel pharmaceutical material that promotes the healing of infected wounds. The present work aimed to prepare and evaluate the efficacy of novel azithromycin-loaded zinc oxide nanoparticles (AZM-ZnONPs) in the treatment of infected wounds. The Box-Behnken design and response surface methodology were used to evaluate loading efficiency and release characteristics of the prepared NPs. The minimum inhibitory concentration (MIC) of the formulations was determined against Staphylococcus aureus and Escherichia coli. Moreover, the anti-bacterial and wound-healing activities of the AZM-loaded ZnONPs impregnated into hydroxyl propyl methylcellulose (HPMC) gel were evaluated in an excisional wound model in rats. The prepared ZnONPs were loaded with AZM by adsorption. The prepared ZnONPs were fully characterized by XRD, EDAX, SEM, TEM, and FT-IR analysis. Particle size distribution for the prepared ZnO and AZM-ZnONPs were determined and found to be 34 and 39 nm, respectively. The mechanism by which AZM adsorbed on the surface of ZnONPs was the best fit by the Freundlich model with a maximum load capacity of 160.4 mg/g. Anti-microbial studies showed that AZM-ZnONPs were more effective than other controls. Using an experimental infection model in rats, AZM-ZnONPs impregnated into HPMC gel enhanced bacterial clearance and epidermal regeneration, and stimulated tissue formation. In conclusion, AZM -loaded ZnONPs are a promising platform for effective and rapid healing of infected wounds.

Intratracheal Administration of Chloroquine-Loaded Niosomes Minimize Systemic Drug Exposure

Pulmonary administration provides a useful alternative to oral and invasive routes of administration while enhancing and prolonging the accumulation of drugs into the lungs and reducing systemic drug exposure. In this study, chloroquine, as a model drug, was loaded into niosomes for potential pulmonary administration either via dry powder inhalation or intratracheally. Chloroquine-loaded niosomes have been prepared and extensively characterized. Furthermore, drug-loaded niosomes were lyophilized and their flowing properties were evaluated by measuring the angle of repose, Carr's index, and Hausner ratio. The developed niosomes demonstrated a nanosized (100-150 nm) spherical morphology and chloroquine entrapment efficiency of ca. 24.5%. The FT-IR results indicated the incorporation of chloroquine into the niosomes, whereas in vitro release studies demonstrated an extended-release profile of the drug-loaded niosomes compared to the free drug. Lyophilized niosomes exhibited poor flowability that was not sufficiently improved after the addition of lactose or when cryoprotectants were exploited throughout the lyophilization process. In vivo, intratracheal administration of chloroquine-loaded niosomes in rats resulted in a drug concentration in the blood that was 10-fold lower than the oral administration of the free drug. Biomarkers of kidney and liver functions (i.e., creatinine, urea, AST, and ALT) following pulmonary administration of the drug-loaded nanoparticles were of similar levels to those of the control untreated animals. Hence, the use of a dry powder inhaler for administration of lyophilized niosomes is not recommended, whereas intratracheal administration might provide a promising strategy for pulmonary administration of niosomal dispersions while minimizing systemic drug exposure and adverse reactions.

Recent developments in polysaccharide-based electrospun nanofibers for environmental applications

Electrospinning has become an inevitable approach to produce nanofibrous structures for diverse environmental applications. Polysaccharides, due to their variety of types, biobased origins, and eco-friendly, and renewable nature are wonderful materials for the said purpose. The present review discusses the electrospinning process, the parameters involved in the formation of electrospun nanofibers in general, and the polysaccharides in specific. The selection of materials to be electrospun depends on the processing conditions and properties deemed desirable for specific applications. Thereby, the conditions to electrospun polysaccharides-based nanofibers have been focused on for possible environmental applications including air filtration, water treatment, antimicrobial treatment, environmental sensing, and so forth. The polysaccharide-based electrospun membranes, for instance, due to their active adsorption sites could find significant potential for contaminants removal from the aqueous systems. The study also gives some recommendations to overcome any shortcomings faced during the electrospinning and environmental applications of polysaccharide-based matrices.

Design and Preclinical Evaluation of Chitosan/Kaolin Nanocomposites with Enhanced Hemostatic Efficiency

In the current study, hemostatic compositions including a combination of chitosan and kaolin have been developed. Chitosan is a marine polysaccharide derived from chitins, a structural component in the shells of crustaceans. Both chitosan and kaolin have the ability to mediate a quick and efficient hemostatic effect following immediate application to injury sites, and thus they have been widely exploited in manufacturing of hemostatic composites. By combining more than one hemostatic agent (i.e., chitosan and kaolin) that act via more than one mechanism, and by utilizing different nanotechnology-based approaches to enhance the surface areas, the capability of the dressing to control bleeding was improved, in terms of amount of blood loss and time to hemostasis. The nanotechnology-based approaches utilized to enhance the effective surface area of the hemostatic agents included the use of Pluronic nanoparticles, and deposition of chitosan micro- and nano-fibers onto the carrier. The developed composites effectively controlled bleeding and significantly improved hemostasis and survival rates in two animal models, rats and rabbits, compared to conventional dressings and QuikClot^® Combat Gauze. The composites were well-tolerated as demonstrated by their in vivo biocompatibility and absence of clinical and biochemical changes in the laboratory animals after application of the dressings.

Nanoparticles integrating natural and synthetic polymers for in vivo insulin delivery

The aims of the current study were to develop insulin-loaded nanoparticles comprised of various polymers at different compositions, and to evaluate their ability to lower blood glucose levels in diabetic rats following subcutaneous and oral administrations. Several combinations of natural and synthetic polymers have been utilized for preparation of nanoparticles including, chitosan, alginate, albumin and Pluronic. Nanosized (170 nm-800 nm) spherical particles of high encapsulation efficiency (15-52%) have been prepared. Composition and ratios between the integrated polymers played a pivotal role in determining size, zeta potential, and in vivo hypoglycemic activity of particles. After subcutaneous and oral administration in diabetic rats, some of the insulin-loaded nanoparticles were able to induce much higher hypoglycemic effect as compared to the unloaded free insulin. For instance, subcutaneous injection of nanoparticles comprised of chitosan combined with sodium tripolyphosphate, Pluronic or alginate/calcium chloride, resulted in comparable hypoglycemic effects to free insulin, at two-fold lower dose. Nanoparticles were well-tolerated after oral administration in rats, as evidenced by by measuring levels of alanine aminotransferase, aspartate aminotransferases, albumin, creatinine and urea. This study indicates that characteristics and delivery efficiency of nanomaterials can be controlled via utilizing several natural/synthetic polymers and by fine-tuning of combination ratio between polymers.