Inhaled therapy for COVID-19: Considerations of drugs, formulations and devices

COVID-19 severity gradient differentially dysregulates clinically relevant drug processing genes in nasopharyngeal swab samples

AIM

Understanding how COVID-19 impacts the expression of clinically relevant drug metabolizing enzymes and membrane transporters (DMETs) is vital for addressing potential safety and efficacy concerns related to systemic and peripheral drug concentrations. This study investigates the impact of COVID-19 severity on DMETs expression and the underlying mechanisms to inform the design of precise clinical dosing regimens for affected patients.

METHODS

Transcriptomics analysis of 102 DMETs, 10 inflammatory markers, and 12 xenosensing regulatory genes was conducted on nasopharyngeal swabs from 50 SARS-CoV-2 positive (17 outpatients, 16 non-ICU, and 17 ICU) and 13 SARS-CoV-2 negative individuals, clinically tested through qPCR, in the Greater Toronto area from October 2020 to October 2021.

RESULTS

We observed a significant differential gene expression for 42 DMETs, 6 inflammatory markers, and 9 xenosensing regulatory genes. COVID-19 severity was associated with the upregulation of AKR1C1, MGST1, and SULT1E1, and downregulation of ABCC10, CYP3A43, and SLC29A4 expressions. Altogether, SARS-CoV-2-positive patients showed an upregulation in CYP2C9, CYP2C19, AKR1C1, SULT1B1, SULT2B1, and SLCO4A1 and downregulation in FMO5, MGST3, ABCC5, and SLCO4C1 compared with SARS-CoV-2 negative individuals. These dysregulations were associated with significant changes in the expression of inflammatory and xenosensing regulatory genes driven by the disease. GSTM3, PPARA, and AKR1C1 are potential biomarkers of the observed DMETs dysregulation pattern in nasopharyngeal swabs of outpatients, non-ICU, and ICU patients, respectively.

CONCLUSION

The severity of COVID-19 is associated with the dysregulation of DMETs involved in processing commonly prescribed drugs, suggesting potential disease-drug interactions, especially for narrow therapeutic index drugs.

Repurposing ebselen as an inhalable dry powder to treat respiratory tract infections

Respiratory tract infections (RTIs) are one of the leading causes of death globally, lately exacerbated by the increasing prevalence of antimicrobial resistance. While antimicrobial resistance could be overcome by developing new antimicrobial agents, the use of a safe repurposed agent having potent antimicrobial activity against various RTIs can be an efficient and cost-effective alternative to overcome the long and complex process of developing and testing new drugs. Ebselen, a synthetic organoselenium drug originally developed to treat noise-inducing hearing problems, has shown promising antimicrobial activity in vitro against several respiratory pathogens including viruses (e.g., SARS-CoV-2, influenza A virus) and bacteria (e.g., Mycobacterium tuberculosis, Streptococcus pneumoniae, and Staphylococcus aureus). Inhaled drug delivery is considered a promising approach for treating RTIs, as it can ensure effective drug concentrations at a lower dose, thereby minimizing the side effects that are often encountered by using oral or injectable drugs. In this study, we developed inhalable ebselen dry powder formulations using a spray-drying technique. The amino acids leucine, methionine, and tryptophan were incorporated with ebselen to enhance the yield and aerosolization of the dry powders. The amino acid-containing ebselen dry powders showed a better yield (37-56.4 %) than the amino acid-free formulation (30.9 %). All dry powders were crystalline in nature. The mass median aerodynamic diameter (MMAD) was less than 5 µm for amino acids containing dry powders (3-4 µm) and slightly higher (5.4 µm) for amino acid free dry powder indicating their suitability for inhalation. The aerosol performance was higher when amino acids were used, and the leucine-containing ebselen dry powder showed the highest emitted dose (84 %) and fine particle fraction (68 %). All amino acid formulations had similar cytotoxicity as raw ebselen, tested in respiratory cell line (A549 cells), with half-maximal inhibitory concentrations (IC50) between 100 and 250 μg/mL. Raw ebselen and amino acid-containing dry powders showed similar potent antibacterial activity against the Gram-positive bacteria S. aureus and S. pneumoniae with minimum inhibitory concentrations of 0.31 μg/mL and 0.16 μg/mL, respectively. On the other hand, raw ebselen and the formulations showed limited antimicrobial activity against the Gram-negative pathogens Pseudomonas aeruginosa and Klebsiella pneumoniae. In summary, in this study we were able to develop amino-acid-containing inhalable dry powders of ebselen that could be used against different respiratory pathogens, especially Gram-positive bacteria, which could ensure more drug deposition in the respiratory tract, including the lungs. DPIs are generally used to treat lung (lower respiratory tract) diseases. However, DPIs can also be used to treat both upper and lower RTIs. The deposition of the dry powder in the respiratory tract is dependent on its physicochemical properties and this properties can be modulated to target the intended site of infection (upper and/or lower respiratory tract). Further studies will allow the development of similar formulations of individual and/or combination of antimicrobials that could be used to inhibit a number of respiratory pathogens.

A perspective current and past modes of inhalation therapy

Inhalation is the preferred route of delivery for anti-asthma and chronic obstructive pulmonary disease (COPD) drugs. The use of this route has demonstrated efficacy in these and other conditions, it offers rapid onset of action, and is associated with minimal systemic exposure, thereby reducing the risk of adverse effects. Therefore, the current brief covers an interesting collection of inhaler action modes, shedding light on their molecular mechanisms and clinical applications for anti-asthma, COPD and antibacterial inhalation therapy. Hence, not only enriches our understanding of inhalation therapy molecular intricacies but also provides a comprehensive overview of the evolving landscape in clinical and antibacterial inhalation therapy. In doing so, it underscores the pivotal role of microbiology and biotechnology in advancing therapeutic approaches that harness the power of inhalation.

Nano-Formulations for Pulmonary Delivery: Past, Present, and Future Perspectives

With the development of nanotechnology and confronting the problems of traditional pharmaceutical formulations in treating lung diseases, inhalable nano-formulations have attracted interest. Inhalable nano-formulations for treating lung diseases allow for precise pulmonary drug delivery, overcoming physiological barriers, improving aerosol lung deposition rates, and increasing drug bioavailability. They are expected to solve the difficulties faced in treating lung diseases. However, limited success has been recorded in the industrialization translation of inhalable nano-formulations. Only one relevant product has been approved by the FDA to date, suggesting that there are still many issues to be resolved in the clinical application of inhalable nano-formulations. These systems are characterized by a dependence on inhalation devices, while the adaptability of device formulation is still inconclusive, which is the most important issue impeding translational research. In this review, we categorized various inhalable nano-formulations, summarized the advantages of inhalable nano-formulations over conventional inhalation formulations, and listed the inhalable nano-formulations undergoing clinical studies. We focused on the influence of inhalation devices on nano-formulations and analyzed their adaptability. After extensive analysis of the drug delivery mechanisms, technical processes, and limitations of different inhalation devices, we concluded that vibrating mesh nebulizers might be most suitable for delivering inhalable nano-formulations, and related examples were introduced to validate our view. Finally, we presented the challenges and outlook for future development. We anticipate providing an informative reference for the field.

In silico identification of five binding sites on the SARS-CoV-2 spike protein and selection of seven ligands for such sites

To contribute to the development of products capable of complexing with the SARS-CoV-2 spike protein, and thus preventing the virus from entering the host cell, this work aimed at discovering binding sites in the whole protein structure, as well as selecting substances capable of binding efficiently to such sites. Initially, the three-dimensional structure of the protein, with all receptor binding domains in the closed state, underwent blind docking with 38 substances potentially capable of binding to this protein according to the literature. This allowed the identification of five binding sites. Then, those substances with more affinities for these sites underwent pharmacophoric search in the ZINC15 database. The 14,329 substances selected from ZINC15 were subjected to docking to the five selected sites of the spike protein. The ligands with more affinities for the protein sites, as well as the selected sites themselves, were used in the de novo design of new ligands that were also docked to the binding sites of the protein. The best ligands, regardless of their origins, were used to form complexes with the spike protein, which were subsequently used in molecular dynamics simulations and calculations of ligands affinities to the protein through the molecular mechanics/Poisson-Boltzmann surface area method (MMPBSA). Seven substances with good affinities to the spike protein (-12.9 to -20.6 kcal/mol), satisfactory druggability (Bioavailability score: 0.17 to 0.55), and low acute toxicity to mice (LD50: 751 to 1421 mg/kg) were selected as potentially useful for the future development of new products to manage COVID-19 infections.Communicated by Ramaswamy H. Sarma.

Advancements in Chitosan-Based Nanoparticles for Pulmonary Drug Delivery

The evolution of respiratory diseases represents a considerable public health challenge, as they are among the leading causes of death worldwide. In this sense, in addition to the high prevalence of diseases such as asthma, chronic obstructive pulmonary disease, pneumonia, cystic fibrosis, and lung cancer, emerging respiratory diseases, particularly those caused by members of the coronavirus family, have contributed to a significant number of deaths on a global scale over the last two decades. Therefore, several studies have been conducted to optimize the efficacy of treatments against these diseases, focusing on pulmonary drug delivery using nanomedicine. Thus, the development of nanocarriers has emerged as a promising alternative to overcome the limitations of conventional therapy, by increasing drug bioavailability at the target site and reducing unwanted side effects. In this context, nanoparticles composed of chitosan (CS) show advantages over other nanocarriers because chitosan possesses intrinsic biological properties, such as anti-inflammatory, antimicrobial, and mucoadhesive capacity. Moreover, CS nanoparticles have the potential to enhance drug stability, prolong the duration of action, improve drug targeting, control drug release, optimize dissolution of poorly soluble drugs, and increase cell membrane permeability of hydrophobic drugs. These properties could optimize the performance of the drug after its pulmonary administration. Therefore, this review aims to discuss the potential of chitosan nanoparticles for pulmonary drug delivery, highlighting how their biological properties can improve the treatment of pulmonary diseases, including their synergistic action with the encapsulated drug.

An inhaled ACE2 decoy confers protection against SARS-CoV-2 infection in preclinical models

The Omicron variant continuously evolves under the humoral immune pressure exerted by vaccination and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, and the resulting Omicron subvariants display further immune evasion and antibody escape. An engineered angiotensin-converting enzyme 2 (ACE2) decoy composed of high-affinity ACE2 and an IgG1 Fc domain could offer an alternative modality to neutralize SARS-CoV-2. We previously reported its broad spectrum and therapeutic potential in rodent models. Here, we demonstrate that the engineered ACE2 decoy retains neutralization activity against Omicron subvariants, including the currently emerging XBB and BQ.1 strains, which completely evade antibodies currently in clinical use. SARS-CoV-2, under the suboptimal concentration of neutralizing drugs, generated SARS-CoV-2 mutants escaping wild-type ACE2 decoy and monoclonal antibodies, whereas no escape mutant emerged against the engineered ACE2 decoy. Furthermore, inhalation of aerosolized decoys improved the outcomes of rodents infected with SARS-CoV-2 at a 20-fold lower dose than that of intravenous administration. Last, the engineered ACE2 decoy exhibited therapeutic efficacy for cynomolgus macaques infected with SARS-CoV-2. These results indicate that this engineered ACE2 decoy represents a promising therapeutic strategy to overcome immune-evading SARS-CoV-2 variants and that liquid aerosol inhalation could be considered as a noninvasive approach to enhance the efficacy of COVID-19 treatments.

Spray-Dried Inhalable Microparticles Combining Remdesivir and Ebselen against SARS-CoV-2 Infection

There is a continuous effort to develop efficient treatments for coronavirus disease 2019 (COVID-19) and other viral respiratory diseases. Among the different strategies, inhaled treatment is considered one of the most logical and efficient approaches to treating COVID-19, as the causative "SARS-CoV-2 virus RNA" predominantly infects the respiratory tract. COVID-19 treatments initially relied on repurposed drugs, with a few additional strategies developed during the last two years, and all of them are based on monotherapy. However, drug combinations have been found to be more effective than monotherapy in other viral diseases such as HIV, influenza, and hepatitis C virus. In the case of SARS-CoV-2 infection, in vitro studies have shown synergistic antiviral activity combining remdesivir with ebselen, an organoselenium compound. Therefore, these drug combinations could ensure better therapeutic outcomes than the individual agents. In this study, we developed a dry powder formulation containing remdesivir and ebselen using a spray-drying technique and used L-leucine as an aerosolization enhancer. The prepared dry powders were spherical and crystalline, with a mean particle size between 1 and 3 µm, indicating their suitability for inhalation. The emitted dose (ED) and fine particle fraction (FPF) of remdesivir- and ebselen-containing dry powders were ~80% and ~57% when prepared without L-leucine. The ED as well as the FPF significantly increased with values of >86% and >67%, respectively, when L-leucine was incorporated. More importantly, the single and combinational dry powder of remdesivir and ebselen showed minimal cytotoxicity (CC50 > 100 μM) in Calu-3 cells, retaining their anti-SARS-CoV-2 properties (EC50 2.77 to 18.64 μM). In summary, we developed an inhalable dry powder combination of remdesivir and ebselen using a spray-drying technique. The spray-dried inhalable microparticles retained their limited cytotoxicity and specific antiviral properties. Future in vivo studies are needed to verify the potential use of these remdesivir/ebselen combinational spray-dried inhalable microparticles to block the SARS-CoV-2 replication in the respiratory tract.

The In Vitro, In Vivo, and PBPK Evaluation of a Novel Lung-Targeted Cardiac-Safe Hydroxychloroquine Inhalation Aerogel

Hydroxychloroquine (HCQ) was repurposed for COVID-19 treatment. Subtherapeutic HCQ lung levels and cardiac toxicity of oral HCQ were overcome by intratracheal (IT) administration of lower HCQ doses. The crosslinker-free supercritical fluid technology (SFT) produces aerogels and impregnates them with drugs in their amorphous form with efficient controlled release. Mechanistic physiologically based pharmacokinetic (PBPK) modeling can predict the lung's epithelial lining fluid (ELF) drug levels. This study aimed to develop a novel HCQ SFT formulation for IT administration to achieve maximal ELF levels and minimal cardiac toxicity. HCQ SFT formulation was prepared and evaluated for physicochemical, in vitro release, pharmacokinetics, and cardiac toxicity. Finally, the rat HCQ ELF concentrations were predicted using PBPK modeling. HCQ was amorphous after loading into the chitosan-alginate nanoporous microparticles (22.7±7.6 μm). The formulation showed a zero-order release, with only 40% released over 30 min compared to 94% for raw HCQ. The formulation had a tapped density of 0.28 g/cm3 and a loading efficiency of 35.3±1.3%. The IT administration of SFT HCQ at 1 mg/kg resulted in 23.7-fold higher bioavailability, fourfold longer MRT, and eightfold faster absorption but lower CK-MB and LDH levels than oral raw HCQ at 4 mg/kg. The PBPK model predicted 6 h of therapeutic ELF levels for IT SFT HCQ and a 100-fold higher ELF-to-heart concentration ratio than oral HCQ. Our findings support the feasibility of lung-targeted and more effective SFT HCQ IT administration for COVID-19 compared to oral HCQ with less cardiac toxicity. Graphical abstract.

Kaempferol inhibits SARS-CoV-2 invasion by impairing heptad repeats-mediated viral fusion

BACKGROUND

The continuous evolution of SARS-CoV-2 has underscored the development of broad-spectrum prophylaxis. Antivirals targeting the membrane fusion process represent promising paradigms. Kaempferol (Kae), an ubiquitous plant flavonol, has been shown efficacy against various enveloped viruses. However, its potential in anti-SARS-CoV-2 invasion remains obscure.

PURPOSE

To evaluate capabilities and mechanisms of Kae in preventing SARS-CoV-2 invasion.

METHODS

To avoid interference of viral replication, virus-like particles (VLPs) constructed with luciferase reporter were applied. To investigate the antiviral potency of Kae, human induced pluripotent stem cells (hiPSC)-derived alveolar epithelial cells type II (AECII) and human ACE2 (hACE2) transgenic mice were utilized as in vitro and in vivo models, respectively. Using dual split protein (DSP) assays, inhibitory activities of Kae in viral fusion were determined in Alpha, Delta and Omicron variants of SARS-CoV-2, as well as in SARS-CoV and MERS-CoV. To further reveal molecular determinants of Kae in restricting viral fusion, synthetic peptides corresponding to the conserved heptad repeat (HR) 1 and 2, involved in viral fusion, and the mutant form of HR2 were explored by circular dichroism and native polyacrylamide gel electrophoresis.

RESULTS

Kae inhibited SARS-CoV-2 invasion both in vitro and in vivo, which was mainly attributed to its suppressive effects on viral fusion, but not endocytosis, two pathways that mediate viral invasion. In accordance with the proposed model of anti-fusion prophylaxis, Kae functioned as a pan-inhibitor of viral fusion, including three emerged highly pathogenic coronaviruses, and the currently circulating Omicron BQ.1.1 and XBB.1 variants of SARS-CoV-2. Consistent with the typical target of viral fusion inhibitors, Kae interacted with HR regions of SARS-CoV-2 S2 subunits. Distinct from previous inhibitory fusion peptides which prevent the formation of six-helix bundle (6-HB) by competitively interacting with HRs, Kae deformed HR1 and directly reacted with lysine residues within HR2 region, the latter of which was considered critical for the preservation of stabilized S2 during SARS-CoV-2 invasion.

CONCLUSIONS

Kae prevents SARS-CoV-2 infection by blocking membrane fusion and possesses a broad-spectrum anti-fusion ability. These findings provide valuable insights into potential benefits of Kae-containing botanical products as a complementary prophylaxis, especially during the waves of breakthrough infections and re-infections.

Advances in Antiviral Delivery Systems and Chitosan-Based Polymeric and Nanoparticulate Antivirals and Antiviral Carriers

Current antiviral therapy research is focused on developing dosage forms that enable highly effective drug delivery, providing a selective effect in the organism, lower risk of adverse effects, a lower dose of active pharmaceutical ingredients, and minimal toxicity. In this article, antiviral drugs and the mechanisms of their action are summarized at the beginning as a prerequisite background to develop relevant drug delivery/carrier systems for them, classified and briefly discussed subsequently. Many of the recent studies aim at different types of synthetic, semisynthetic, and natural polymers serving as a favorable matrix for the antiviral drug carrier. Besides a wider view of different antiviral delivery systems, this review focuses on advances in antiviral drug delivery systems based on chitosan (CS) and derivatized CS carriers. CS and its derivatives are evaluated concerning methods of their preparation, their basic characteristics and properties, approaches to the incorporation of an antiviral drug in the CS polymer as well as CS nanoparticulate systems, and their recent biomedical applications in the context of actual antiviral therapy. The degree of development (i.e., research study, in vitro/ex vivo/in vivo preclinical testing), as well as benefits and limitations of CS polymer and CS nanoparticulate drug delivery systems, are reported for particular viral diseases and corresponding antivirotics.

Inhalable neutralizing antibodies - promising approach to combating respiratory viral infections

Monoclonal antibodies represent an exciting class of therapeutics against respiratory viral infections. Notwithstanding their specificity and affinity, the conventional parenteral administration is suboptimal in delivering antibodies for neutralizing activity in the airways due to the poor distribution of macromolecules to the respiratory tract. Inhaled therapy is a promising approach to overcome this hurdle in a noninvasive manner, while advances in antibody engineering have led to the development of unique antibody formats which exhibit properties desirable for inhalation. In this Opinion, we examine the major challenges surrounding the development of inhaled antibodies, identify knowledge gaps that need to be addressed and provide strategies from a drug delivery perspective to enhance the efficacy and safety of neutralizing antibodies against respiratory viral infections.

Recent updates on liposomal formulations for detection, prevention and treatment of coronavirus disease (COVID-19)

The unprecedented outbreak of severe acute respiratory syndrome-2 (SARS-CoV-2) worldwide has rendered it one of the most notorious pandemics ever documented in human history. As of November 2022, nearly 626 million cases of infection and over 6.6 million deaths have been reported globally. The scientific community has made significant progress in therapeutics and prevention for the management of coronavirus disease (COVID-19), including the development of vaccines and antiviral agents such as monoclonal antibodies and antiviral drugs. Although many advancements and a plethora of positive results have been obtained and global restrictions are being uplifted, obstacles in efficiently delivering these therapies, such as their rapid clearance, suboptimal biodistribution, and toxicity to organs, have yet to be addressed. To address these drawbacks, researchers have attempted applying nanotechnology-based formulations. Here, we summarized the recent data about COVID-19, its emergence, pathophysiology and life cycle, diagnosis, and currently-available medications. Subsequently, we discussed the progress in lipid nanocarriers, such as liposomes in infection detection and control. This review provides critical insights into the design of the latest liposomal-based formulations for tackling the barriers to detecting, preventing, and treating SARS-CoV-2.

Mechanisms and challenges of nanocarriers as non-viral vectors of therapeutic genes for enhanced pulmonary delivery

With the rapid development of biopharmaceuticals and the outbreak of COVID-19, the world has ushered in a frenzy to develop gene therapy. Therefore, therapeutic genes have received enormous attention. However, due to the extreme instability and low intracellular gene expression of naked genes, specific vectors are required. Viral vectors are widely used attributed to their high transfection efficiency. However, due to the safety concerns of viral vectors, nanotechnology-based non-viral vectors have attracted extensive investigation. Still, issues of low transfection efficiency and poor tissue targeting of non-viral vectors need to be addressed. Especially, pulmonary gene delivery has obvious advantages for the treatment of inherited lung diseases, lung cancer, and viral pneumonia, which can not only enhance lung targeting and but also reduce enzymatic degradation. For systemic diseases therapy, pulmonary gene delivery can enhance vaccine efficacy via inducing not only cellular, humoral immunity but also mucosal immunity. This review provides a comprehensive overview of nanocarriers as non-viral vectors of therapeutic genes for enhanced pulmonary delivery. First of all, the characteristics and therapeutic mechanism of DNA, mRNA, and siRNA are provided. Thereafter, the advantages and challenges of pulmonary gene delivery in exerting local and systemic effects are discussed. Then, the inhalation dosage forms for nanoparticle-based drug delivery systems are introduced. Moreover, a series of materials used as nanocarriers for pulmonary gene delivery are presented, and the endosomal escape mechanisms of nanocarriers based on different materials are explored. The application of various non-viral vectors for pulmonary gene delivery are summarized in detail, with the perspectives of nano-vectors for pulmonary gene delivery.