Early failure of symphysis pubis plating

Transobturator-cable-fixation in pelvic ring injuries with symphyseal disruption - a last resort?

PURPOSE

The role of transobturator-cable-fixation (TOCF) in traumatic symphyseal rupture of the pelvic ring remains unclear. This case series aims to evaluate TOCF in complex and revision cases in pelvic surgery.

METHODS

A retrospective analysis of a chronological case series was conducted, studying pelvic fractures stabilized using TOCF between January 2006 and December 2022. The variables considered included age, gender, fracture classification, Injury Severity Score (ISS), Body Mass Index (BMI), trauma mechanism, time to surgery, fixation technique, hospital duration, complications, status on discharge (Glasgow Outcome Scale; GOS), follow-up time and indication for the use of TOCF.

RESULTS

All patients (N = 7) were male with a mean age of 64 years and a mean BMI of 29. The mean ISS was 45, with the lowest ISS of 25, indicating that only polytraumatized patients were included. Two anterior-posterior-compression-, four lateral-compression-, and one vertical-shear-pelvic-injury were identified. TOCF was added in six cases to support symphyseal plating and in one case to external fixation. The mean hospital stay was 49 days and the mean follow-up duration was 8.5 months. No complications associated with TOCF were observed during the surgical procedure or follow-up.

CONCLUSION

TOCF showed no procedure-associated complications and effectively supported symphyseal healing in all cases. The main indications were obesity, poor bone quality in elderly patients, and revision cases. TOCF could be considered as a last treatment option in open-book pelvic injuries where plating or external fixation is at risk to fail.

Motion preservation for open book injuries of the pubic symphysis -a biomechanical cadaver study

INTRODUCTION

Open book injuries are challenging injuries that oftentimes require surgical treatment. Currently, treatment is performed with symphyseal plating requiring extensive surgery and entirely limiting physiological movement of the symphyseal joint, frequently resulting in implant failure. Therefore, we investigated the biomechanical properties of a minimally invasive tape suture construct (modified SpeedBridge™) as an alternative stabilization technique for the treatment of open book injuries in human cadaver pelvic rings.

MATERIALS AND METHODS

The symphysis of 9 human cadaver pelvises was dissected and dilated to 3 cm creating an open book injury. Next, the two osteosynthesis methods (plating, modified SpeedBridge™) were applied. All specimens then underwent cyclic horizontal and vertical loading, simulating biomechanical forces while sitting, standing and walking. For statistical analysis, 3D dislocation (mm) was calculated.

RESULTS

Total displacement (mm) of the pubic symphysis displayed the following means and standard deviations: native group 1.34 ± 0.62 mm, open book group 3.01 ± 1.26 mm, tape group 1.94 ± 0.59 mm and plate group 1.37 ± 0.41 mm. Comparison between native and open book (p = 0.029), open book and plate (p = 0.004), open book and tape (p = 0.031), as well as tape and plate group (p = 0.002) showed significant differences. No significant differences were found when comparing the native and tape (p = 0.059), as well as the native and plate (p = 0.999) group.

CONCLUSION

While both osteosynthesis techniques sufficiently stabilized the injury, symphyseal plating displayed the highest rigidity. The modified SpeedBridge™ as a tape suture construct provided statistically sufficient biomechanical stability while maintaining symphyseal micro mobility, consequently allowing ligamental healing of the injured joint without iatrogenic arthrodesis.

The clinical relevance of fixation failure after pubic symphysis plating for anterior pelvic ring injuries: an observational cohort study with long-term follow-up

BACKGROUND

Open reduction and plate fixation is a standard procedure for treating traumatic symphyseal disruptions, but has a high incidence of implant failure. Several studies have attempted to identify predictors for implant failure and discussed its impact on functional outcome presenting conflicting results. Therefore, this study aimed to identify predictors of implant failure and to investigate the impact of implant failure on pain and functional outcome.

METHODS

In a single-center, retrospective, observational non-controlled cohort study in a level-1 trauma center from January 1, 2006, to December 31, 2017, 42 patients with a plate fixation of a traumatic symphyseal disruption aged ≥ 18 years with a minimum follow-up of 12 months were included. The following parameters were examined in terms of effect on occurrence of implant failure: age, body mass index (BMI), injury severity score (ISS), polytrauma, time to definitive treatment, postoperative weight-bearing, the occurrence of a surgical site infection, fracture severity, type of posterior injury, anterior and posterior fixation. A total of 25/42 patients consented to attend the follow- up examination, where pain was assessed using the Numerical Rating Scale and functional outcome using the Majeed Pelvic Score.

RESULTS

Sixteen patients had an anterior implant failure (16/42; 37%). None of the parameters studied were predictive for implant failure. The median follow-up time was six years and 8/25 patients had implant failure. There was no difference in the Numerical Rating Scale, but the work-adjusted Majeed Pelvic Score showed a better outcome for patients with implant failure.

CONCLUSION

implant failure after symphyseal disruptions is not predictable, but appears to be clinically irrelevant. Therefore, an additional sacroiliac screw to prevent implant failure should be critically discussed and plate removal should be avoided in asymptomatic patients.

Substitutional semi-rigid osteosynthesis technique for treatment of unstable pubic symphysis injuries: a biomechanical study

BACKGROUND/PURPOSE

The surgical fixation of a symphyseal diastasis in partially or fully unstable pelvic ring injuries is an important element when stabilizing the anterior pelvic ring. Currently, open reduction and internal fixation (ORIF) by means of plating represents the gold standard treatment. Advances in percutaneous fixation techniques have shown improvements in blood loss, surgery time, and scar length. Therefore, this approach should also be adopted for treatment of symphyseal injuries. The technique could be important since failure rates, following ORIF at the symphysis, remain unacceptably high. The aim of this biomechanical study was to assess a semi-rigid fixation technique for treatment of such anterior pelvic ring injuries versus current gold standards of plate osteosynthesis.

METHODS

An anterior pelvic ring injury type III APC according to the Young and Burgess classification was simulated in eighteen composite pelvises, assigned to three groups (n = 6) for fixation with either a single plate, two orthogonally positioned plates, or the semi-rigid technique using an endobutton suture implant. Biomechanical testing was performed in a simulated upright standing position under progressively increasing cyclic loading at 2 Hz until failure or over 150,000 cycles. Relative movements between the bone segments were captured by motion tracking.

RESULTS

Initial quasi-static and dynamic stiffness, as well as dynamic stiffness after 100,000 cycles, was not significantly different among the fixation techniques (p ≥ 0.054).). The outcome measures for total displacement after 20,000, 40,000, 60,000, 80,000, and 100,000 cycles were associated with significantly higher values for the suture technique versus double plating (p = 0.025), without further significant differences among the techniques (p ≥ 0.349). Number of cycles to failure and load at failure were highest for double plating (150,000 ± 0/100.0 ± 0.0 N), followed by single plating (132,282 ± 20,465/91.1 ± 10.2 N), and the suture technique (116,088 ± 12,169/83.0 ± 6.1 N), with significantly lower values in the latter compared to the former (p = 0.002) and no further significant differences among the techniques (p ≥ 0.329).

CONCLUSION

From a biomechanical perspective, the semi-rigid technique for fixation of unstable pubic symphysis injuries demonstrated promising results with moderate to inferior behaviour compared to standard plating techniques regarding stiffness, cycles to failure and load at failure. This knowledge could lay the foundation for realization of further studies with larger sample sizes, focusing on the stabilization of the anterior pelvic ring.

Pelvic ring injuries: recent advances in diagnosis and treatment

Pelvic ring injuries typically occur from high-energy trauma and are often associated with multisystem injuries. Prompt diagnosis of pelvic ring injuries is essential, and timely initial management is critical in the early resuscitation of polytraumatized patients. Definitive management of pelvic ring injuries continues to be a topic of much debate in the trauma community. Recent studies continue to inform our understanding of static and dynamic pelvic ring stability. Furthermore, literature investigating radiographic and clinical outcomes after nonoperative and operative management will help guide trauma surgeons select the most appropriate treatment of patients with these injuries.

The radiographic outcome after plating for pubic symphysis diastasis: does it matter clinically?

INTRODUCTION

Open reduction and internal fixation with plates is the most widespread surgery in traumatic pubic symphysis diastasis. However, implant failure or recurrent diastasis was commonly observed during follow-up. The aim of our study was to evaluate the radiologic findings and clinical outcomes.

MATERIALS AND METHODS

Sixty-five patients with traumatic pubic symphysis diastasis treated with plating between 2008 and 2019 were retrospectively reviewed. The exclusion criteria were a history of malignancy and age under 20 years. Radiographic outcomes were determined by radiograph findings, including pubic symphysis distance (PSD) and implant failure. Clinical outcomes were assessed according to the Majeed score at the final follow-up.

RESULTS

Twenty-eight patients were finally included. Nine patients (32%) experienced implant failure, including four (14%) with screw loosening and five (18%) with plate breakage. Only one patient underwent revision surgery. Postoperatively, a significant increase in PSD was observed at 3 months and 6 months. Postoperative PSD was not significantly different between patients with single plating and double plating, but it was significantly greater in the implant-failure group than in the non-failure group. The Majeed score was similar between patients with single plating and double plating or between the implant-failure group and the non-failure group. Body mass index, number of plates, age, and initial injured PSD were not significantly different between the implant-failure group and the non-failure group. Only a significant male predominance was observed in the implant-failure group.

CONCLUSION

A gradual increase in the symphysis distance and a high possibility of implant failure may be the distinguishing features of traumatic pubic symphysis diastasis fixation. The postoperative symphyseal distance achieved stability after 6 months, even after implant failure. Radiographic outcomes, such as increased symphysis distance, screw loosening, and plate breakage, did not affect clinical functional outcomes.

Quantification and visualization of anterior pelvis bone density to optimize screw fixation: A novel technique

Plate fixation of anterior pelvic ring fractures is often a vital component when surgically treating unstable pelvis fractures. Certain plate and screw configurations can have premature implant loosening, potentially in part due to insufficient pullout strength in lower density bone. This study sought to define densities about the anterior pelvic ring using a novel computer-based technique. Thirty-three patients who received a computed tomography (CT) of the abdomen/pelvis for reasons other than pelvis fracture in a 1-month time period were included. Three statistically distinct density regions of the anterior pelvis were identified based on the three-dimensional (3D) density map. The densest regions included both the anterior and posterior aspects of the superior pubic ramus, along with the region of bone along the inferior cotyloid fossa. The intermediate density region included the caudal and medial pubic body. The least dense region included the anterior aspect of the inferior pubic ramus (IPR), the posterior pubic body, and the posterior/inferior IPR. This study presents specific quantification of anterior pelvis bone density based on a novel technique using opportunistic CT scans. Clinical Significance: Anterior surgical fixation of unstable pelvic ring injuries may benefit from targeting areas of higher density as described in this novel technique.

Reconstruction with 3D-printed prostheses after type I + II + III internal hemipelvectomy: Finite element analysis and preliminary outcomes

Background: Prosthetic reconstruction after type I + II+ III internal hemipelvectomy remains challenging due to the lack of osseointegration and presence of giant shear force at the sacroiliac joint. The purpose of this study was to evaluate the biomechanical properties of the novel 3D-printed, custom-made prosthesis with pedicle screw-rod system and sacral tray using finite element analysis. Methods: Four models that included one intact pelvis were established for validation. Forces of 500 N and 2,000 N were applied, respectively, to simulate static bipedal standing and the most loaded condition during a gait cycle. Biomechanical analysis was performed, and the results were compared; the preliminary outcomes of four patients were recorded. Results: For the reconstructed hemipelvis, stress was mainly concentrated on the sacral screws, bone-prosthesis interface, and upper endplate of the L5 vertebra. The optimization of the design with the sacral tray structure could decrease the peak stress of the sacral screws by 18.6%, while the maximal stress of the prosthesis increased by 60.7%. The addition of the lumbosacral pedicle-rod system further alleviated stress of the sacral screws and prosthesis by 30.2% and 19.4%, respectively. The site of peak stress was contemporaneously transferred to the connecting rods within an elastic range. In the retrospective clinical study, four patients who had undergone prosthetic reconstruction were included. During a follow-up of 16.6 ± 7.5 months, the walking ability was found preserved in all patients who are still alive and no prosthesis-related complications had occurred except for one hip dislocation. The Musculoskeletal Tumor Society (MSTS) score was found to be 19.5 ± 2.9. Conclusion: The novel reconstructive system yielded favorable biomechanical characteristics and demonstrated promising preliminary outcomes. The method can be used as a reference for reconstruction after type I + II + III hemipelvectomy.

Development and preclinical evaluation of a cable-clamp fixation device for a disrupted pubic symphysis

BACKGROUND

Traumatic separation of the pubic symphysis can destabilize the pelvis and require surgical fixation to reduce symphyseal gapping. The traditional approach involves open reduction and the implantation of a steel symphyseal plate (SP) on the pubic bone to hold the reposition. Despite its widespread use, SP-fixation is often associated with implant failure caused by screw loosening or breakage.

METHODS

To address the need for a more reliable surgical intervention, we developed and tested two titanium cable-clamp implants. The cable served as tensioning device while the clamp secured the cable to the bone. The first implant design included a steel cable anterior to the pubic symphysis to simplify its placement outside the pelvis, and the second design included a cable encircling the pubic symphysis to stabilize the anterior pelvic ring. Using highly reproducible synthetic bone models and a limited number of cadaver specimens, we performed a comprehensive biomechanical study of implant stability and evaluated surgical feasibility.

RESULTS

We were able to demonstrate that the cable-clamp implants provide stability equivalent to that of a traditional SP-fixation but without the same risks of implant failure. We also provide detailed ex vivo evaluations of the safety and feasibility of a trans-obturator surgical approach required for those kind of fixation.

CONCLUSION

We propose that the developed cable-clamp fixation devices may be of clinical value in treating pubic symphysis separation.

Percutaneous screw fixation of the pubic symphysis versus plate osteosynthesis: a biomechanical study

Objectives: To compare the stability of screw fixation with that of plate fixation for symphyseal injuries in a vertically unstable pelvic injury (AO/Tile 61-C1) associated with complete disruption of the sacroiliac joint and the pubic symphysis. Methods: Eight fourth-generation composite pelvis models with sacroiliac and pubic symphyseal disruption (Sawbones, Vashon Island, WA) underwent biomechanical testing simulating static single-leg stance. Four were fixed anteriorly with a symphyseal screw, and 4 with a symphyseal plate. All had single transsacral screw fixation posteriorly. Displacement and rotation were monitored at both sacroiliac joint and pubic symphysis. Results: There was no significant difference between the 2 groups for mean maximum force generated. There was no significant difference in net displacement at both sacroiliac joint and pubic symphysis. There was significantly less rotation but more displacement in the screw group in the Z-axis. The screw group showed increased stiffness compared with the plate group. Conclusions: This is the first biomechanical study to compare screw versus plate symphyseal fixation in a Tile C model. Our biomechanical model using anterior and posterior fixation demonstrates that symphyseal screws may be a viable alternative to classically described symphyseal plating.

Tape suture constructs for instabilities of the pubic symphysis: is the idea of motion preservation a suitable treatment option? A cadaver study

INTRODUCTION

Current gold standard for the treatment of symphyseal disruptions includes anterior plating, almost entirely prohibiting symphyseal mobility and resulting in an iatrogenic arthrodesis followed by high rates of implant failure. Minimally invasive tape suture constructs have been found to maintain the micro mobility of ligamentous injuries, yet still providing sufficient biomechanical stability. Recently, this technique has been primarily investigated for symphyseal disruptions on synthetic pelvic models. Therefore, the aim of this study was to examine the feasibility of this novel flexible osteosynthesis on cadaveric pelvic models based on the following hypothesis: tape suture constructs ensure sufficient biomechanical stability without inhibiting micro mobility of the pubic symphysis for the treatment of symphyseal disruptions and maintain stability during long-term loading.

MATERIALS AND METHODS

9 cadaveric anterior pelvic rings were used in this study and a symphyseal disruption was created in every specimen. The specimens were then exposed to short- and long-term vertical and horizontal cyclic loading after treatment with a tape suture construct in criss-cross technique. The mean maximum displacement (mm) during cyclic loading and the corresponding stiffness (N/mm) were measured and compared.

RESULTS

Regarding both displacement (mm) and corresponding stiffness (N/mm), the tape sutures displayed a significant difference between short- and long-term loading for cranial and caudal vertical loading (p < 0.01) but differences remained non-significant for horizontal loading (p > 0.05). No tape suture suffered from implant failure during long-term loading.

CONCLUSIONS

The tape suture construct displayed sufficient biomechanical stability without exceeding the physiological mobility of 2 mm of the pubic symphysis; however, also maintained the desired micro mobility of the affected joint necessary to prevent an iatrogenic arthrodesis. Further, all tape sutures maintained stability throughout long-term loading.

Biomechanical in vitro analysis of a novel flexible implant for pubic symphysis disruption using an ultra-high molecular weight polyethylene fiber cord

BACKGROUND

Plate osteosynthesis depicts the gold standard to surgically treat pubic symphysis disruptions. However, high rates of implant failure after plate osteosynthesis are reported, probably because of the iatrogenic arthrodesis of this fibrocartilaginous joint. Therefore, flexible implants for treatment of pubic symphysis disruptions appear to be a sensible solution.

METHODS

In this biomechanical screening study, we designed and investigated a flexible implant, which consists of two plates connected with an ultra-high molecular weight polyethylene fiber cord. We mechanically tested eye splices as a possible fixation method of the cords by performing tensile load to failure tests. Afterwards, we developed a biomechanically appropriate plate design and cord routing between the plates. Finally, we biomechanically tested the flexible implant under tensile and shear loading until failure.

FINDINGS

When fixing a 1 mm ultra-high molecular weight polyethylene fiber cord with eye splices, a load at failure of 1570.74 N was detected under tensile loading. None of the eye splices failed but the cords itself ruptured. The load at failure of the designed cord routing in criss-cross technique and fixation within the plates amounts 4742.09 N under tensile and 2699.77 N under shear load.

INTERPRETATION

We developed a novel flexible implant for repair of pubic symphysis disruptions using ultra-high molecular weight polyethylene fiber cords connected to osteosynthesis plates. We identified eye splices as a mechanically optimal fixation method and proved that the ultra-high molecular weight polyethylene fiber cord routing and fixation of the flexible implant clearly withstands physiological forces acting on the pubic symphysis.

Does augmentation increase the pull-out force of symphyseal screws? A biomechanical cadaver study

Purpose

Open reduction and internal fixation using anterior plate osteosynthesis currently represents the gold standard for the treatment of symphyseal disruptions. Since postoperative screw loosening with consequent implant failure is frequently observed, this study aims to evaluate if and to what extent augmentation can increase the pull-out force of symphyseal screws to improve the constructs stability.

Methods

Twelve human cadaveric anterior pelvic rings were separated at the symphyseal joint for bilateral testing, consequently achieving comparable sites. First, one non-augmented screw was drilled into the superior pubic ramus, whereas the contralateral side was primarily augmented. The screws were then withdrawn with a constant speed of 10 mm/min and the fixation strengths determined by the force (N) displacement (mm) curve. Finally, the primary non-augmented site was secondary augmented, representing revision surgery after initial implant failure, and the corresponding fixation strength was measured again.

Results

Augmentation compared to non-augmented screws displayed significantly higher pull-out forces with an increase in pull-out force by 377% for primary and 353% for secondary augmentation (p < 0.01). There was no significant difference in the pull-out force comparing primary and secondary augmentation (p = 0.74).

Conclusions

Primary and secondary augmentation significantly increases the stability of symphyseal screws and, therefore, potentially decreases rates of implant failure.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00068-022-01963-6.

Delayed bladder perforation due to screw loosening after pelvic ring injury surgery: a case report

Pelvic ring injuries have high mortality and morbidity rates, and they are difficult to treat because accompanying injuries to the pelvic organs, genitourinary organs, and neurovascular tissues are common. Genitourinary injuries are common comorbid injuries that have been reported to occur in 5% to 6% of all pelvic ring injuries. However, these injuries usually occur simultaneously with the pelvic ring injury, whereas relatively little research has dealt with genitourinary injuries that occur after treatment of a pelvic ring injury. To the best of our knowledge, only three cases of delayed bladder perforation due to screw loosening after symphyseal plate fixation in anterior pelvic ring injury have been reported worldwide, and no such cases have yet been reported in Korea. Since the authors experienced this very rare complication after pelvic ring surgery, we report this case along with a literature review.

Percutaneous two unilateral iliosacral S1 screw fixation for pelvic ring injuries: a retrospective review of 38 patients

Purpose

Percutaneous iliosacral (IS) screw fixation for pelvic ring injuries is a minimally invasive technique that reduces the amount of blood loss and shortens the procedure time. Moreover, two unilateral IS S1 screws exhibit superior stability to a single IS screw and are also safer for neurological injuries than an S2 screw. Therefore, this study aimed to evaluate fixation using percutaneous two unilateral IS S1 screws for pelvic ring injuries and its subsequent clinical outcomes.

Methods

We retrospectively reviewed 38 patients who underwent percutaneous two unilateral IS S1 screw fixation for pelvic ring injuries. The procedure time, blood loss, achievement of bone union, radiological outcomes (Matta and Tornetta grade), and postoperative complications were evaluated.

Results

The mean procedure time, hemoglobin loss, bone union rate, and time to union were 40.1 minutes (range, 18-102 minutes), 0.6 g/dL (range, 0.3-1.0 g/dL), 100%, and 153.2 days (range, 61-327 days), respectively. The Matta and Tornetta grades were excellent, good, and fair in 24 (63.1%), 11 (28.9%), and three patients (7.9%), respectively, and the postoperative complications were S1 screw loosening, widening of the symphysis pubis (2.3 and 2.5 mm), lumbosacral plexopathy, and S1 radiculopathy in one (2.6%), two (5.3%), one (2.6%), and one patient (2.6%), respectively. However, all neurological complications recovered spontaneously.

Conclusions

Percutaneous two unilateral IS S1 screw fixation was useful for treating pelvic ring injuries. In particular, it involved a short procedure time with little blood loss and also led to 100% bone union and good radiological outcomes.

A biomechanical in-vitro study on an alternative fixation technique of the pubic symphysis for open book injuries of the pelvis

PURPOSE

Implant failure rates remain high after plate fixation in pelvic ring injuries. The aim of this study was to compare an alternative fixation technique with suture-button devices and anterior plate fixation in partially stable open-book injuries.

MATERIAL AND METHODS

We acquired 16 human fresh frozen anatomic pelvic specimens. The sacrospinous, sacrotuberous, and anterior sacroiliac ligaments were bilaterally released, and the pubic symphysis transected to simulate a partially stable open-book (AO/OTA 61-B3.1) injury. The specimens were randomly assigned to the two fixation groups. In the first group two suture-button devices were placed in a criss-crossed position through the symphysis. In second group a six-hole plate with standard 3.5 unlocked bicortical screws was used for fixation. Biomechanical testing was performed on a servo-hydraulic apparatus simulating bilateral stance, as described by Hearn and Varga. Cyclic compression loading with a progressively increasing peak load (0.5 N/cycle) was applied until failure. The failure mode, the load and the number of cycles at failure and the proximal and distal distance of the symphysis during testing were compared.

RESULTS

There was no implant failure in either of the two groups. Failures occurred in nine pelvises (56.2%) at the fixation between the sacrum and the mounting jig and in seven pelvises (43.8%) in the sacroiliac joint. Neither the ultimate load nor the number of cycles at failure differed between the surgical techniques (p = 0.772; p = 0.788, respectively). In the suture button group the mean ultimate load was 874.5 N and the number of cycles at failure was 1907.9. In the plate group values were 826.1 N and 1805.6 cycles, respectively. No significant differences at proximal and distal diastasis of the symphysis were monitored during the whole loading process.

CONCLUSION

The fixation with suture button implants showed comparable results to anterior plate fixation in open-book injuries of the pelvis.

Danger zone - The spermatic cord during anterior plating of the symphysis pubis

BACKGROUND

Distances between anatomic landmarks and anatomic structures at risk are often underestimated by surgeons.

PURPOSE

The goal of the study was to evaluate the distances between anatomic landmarks and the spermatic cord in case of anterior plating of the symphysis.

METHODS

A total of 25 pelves (50 hemipelves) of male embalmed cadavers were dissected. A 5-hole 3.5mm locking compression plate (Synthes GmbH) was fixed from directly anterior on the symphysis. Measurements were taken 1) distance between the tips of both pubic tubercles, 2) horizontal interval between the lateral border of the plate and the medial margin of the SC (bilateral), 3) distances between the medial border of the SC and the tip of the pubic tubercle (bilateral), 4) distances between the medial border of the SC and the lateral basis of the pubic tubercle (bilateral).

RESULTS

The distance between the pubic tubercles was 60.3mm in average (SD: 5.7). The interval between the lateral border of the plate and the medial margin of the SC was on average 4.5mm (SD: 1.9) on the right and 4.7mm (SD: 2.6) on the left side. The distance between the tip of the pubic tubercle and the medial border of the SC was in average 11.2mm (SD: 2.7) on the right, and 11.0mm (SD: 2.7) on the left side. The average distance between the medial border of the SC and the lateral basis of the pubic tubercle was 8.1mm (SD: 2.4) on the right and 8.2 mm (SD: 2.4) on the left side.

CONCLUSION

The SC is at risk not only during dissection but also during anterior plating of the symphysis, because of its close relation to the SC.

CLINICAL RELEVANCE

Average distances between the palpable pubic tubercle and the SC are below one finger breadth (as reference).

Finite element analysis of the Union Plate in treating elderly acetabular fracture patients

BACKGROUND

Elderly acetabular fractures are one of the more difficult types of fractures to resolve. For patients at this age, the more common type of fracture is comminuted. How to better fix this type of fracture has always been an issue of concern. This study was performed to observe the mechanical properties of different internal fixation methods used in treating elderly acetabular fracture patients.

METHODS

A model of a comminuted acetabular fracture in osteoporosis was established, consisting of an anterior column-posterior hemitransverse fracture with disruption of the quadrilateral surface. Fixation of the acetabular fracture model using a reconstruction plate and Union Plates was simulated. For the different internal fixation methods, static and transient modal analyses were performed under different loads, with an action time of 0.21 s and an analysis time of 0.7 s. The stress of the model was observed in the static analysis, and the displacement of the nodes and the entire model in the U1 direction was observed in the transient modal analysis.

RESULTS

In the static analysis, the stress of the osteoporosis model, the suprapectineal pelvic reconstruction plate model, the infrapectineal quadrilateral surface buttress plate model, and the suprapectineal quadrilateral surface buttress plate model were 42.62 MPa, 37.49 MPa, 44.39 MPa, and 46.15 MPa, respectively. The stress was mainly distributed near the suprapubic branch. The corresponding displacement in the U1 direction was 0.1500 mm, 0.1020 mm, 0.0836 mm, and 0.0990 mm, respectively. In the transient modal analysis, there was a significant difference in displacement between the different models (P < 0.05). When different loads were applied with the same fixation method, there was no significant difference in model displacement (P > 0.05).

CONCLUSION

Static and transient modal analyses show that the infrapectineal quadrilateral surface buttress plate or the suprapectineal quadrilateral surface buttress plate has an advantage in maintaining the stability of fracture fragments when fixing comminuted acetabular fractures in elderly individuals. The infrapectineal quadrilateral surface buttress plate also presents better biomechanical results.

Novel minimally invasive tape suture osteosynthesis for instabilities of the pubic symphysis: a biomechanical study

INTRODUCTION

Open book fractures are challenging injuries oftentimes requiring surgical treatment. The current treatment of choice is symphyseal plating, which requires extensive surgery and entirely limits physiological movement of the symphyseal joint, frequently resulting in implant failure. Therefore, we investigated the biomechanical properties of a semi-rigid implant (modified SpeedBridge^™) as a minimally invasive tape suture construct for the treatment of open book fractures and evaluated the superiority of two techniques of implementation: criss-cross vs. triangle technique.

MATERIALS AND METHODS

Nine synthetic symphyseal joints were dissected creating an open book fracture. The different osteosynthesis methods (plating, modified SpeedBridge^™ in criss-cross/triangle technique) were then applied. All constructs underwent horizontal and vertical loading, simulating biomechanical forces while sitting, standing and walking. For statistical analysis, dislocation (mm) and stiffness (N/mm) were calculated.

RESULTS

Symphyseal plating for the treatment of open book fractures proved to be a rigid osteosynthesis significantly limiting the physiological mobility of the symphyseal joint (dislocation: 0.08 ± 0.01 mm) compared to the tape sutures (dislocation: triangle technique 0.27 ± 0.07 mm, criss-cross technique 0.23 ± 0.05 mm) regarding horizontal tension (p < 0.01). Both modified SpeedBridge^™ techniques showed sufficient biomechanical stability without one being superior to the other (p > 0.05 in all directions). Considering vertical loading, no statistical difference was found between all osteosynthesis methods (caudal: p = 0.41; cranial: p = 0.61).

CONCLUSIONS

Symphyseal plating proved to be the osteosynthesis method with the highest rigidity. The modified SpeedBridge^™ as a semi-rigid suture construct provided statistically sufficient biomechanical stability while maintaining a minimum of symphyseal movement, consequently allowing ligamental healing of the injured joint without iatrogenic arthrodesis. Furthermore, both the criss-cross and the triangle technique displayed significant biomechanical stability without one method being superior.

How relevant is lumbar bone mineral density for the stability of symphyseal implants? A biomechanical cadaver study

PURPOSE

Osteoporotic bone tissue appears to be an important risk factor for implant loosening, compromising the stability of surgical implants. However, it is unclear whether lumbar measured bone mineral density (BMD) is of any predictive value for stability of surgical implants at the pubic symphysis. This study examines the fixation strength of cortical screws in human cadaver specimens with different BMDs.

METHODS

The lumbar BMD of ten human specimens was measured using quantitative computed tomography (qCT). A cut-off BMD was set at 120 mg Ca-Ha/mL, dividing the specimens into two groups. One cortical screw was drilled into each superior pubic ramus. The screw was withdrawn in an axial direction with a steady speed and considered failed when a force decrease was detected. Required force (N) and pull-out distance (mm) were constantly tracked.

RESULTS

The median peak force of group 1 was 231.88 N and 228.08 N in group 2. While BMD values differed significantly (p < 0.01), a comparison of peak forces between both groups showed no significant difference (p = 0.481).

CONCLUSION

Higher lumbar BMD did not result in significantly higher pull-out forces at the symphysis. The high proportion of cortical bone near the symphyseal joint allows an increased contact of pubic screws and could explain sufficient fixation. This condition is not reflected by a compromised lumbar BMD in a qCT scan. Therefore, site-specific BMD measurement could improve individual fracture management.

Fixation failure in patients with traumatic diastasis of pubic symphysis: impact of loss of reduction on early functional outcomes

Background

Failure of fixation (FF) in pubic symphysis diastasis (SD) ranges between 12 and 75%, though whether it influences functional outcomes is still debated. The objective of this study is to evaluate the impact of anterior pelvic plate failure and loss of reduction on Majeed’s functional scores.

Methods

Single center retrospective review of consecutive patients with acute SD treated by means of anterior pubic plating. Thirty-seven patients with a mean age 45.7 ± 14.4 years were included. Demographics, AO classification, pelvic fixation and secondary procedures were recorded. Majeed’s functional scores at minimum 6 months follow-up were compared according to the presence of FF and loss of reduction.

Results

Fifteen patients presented FF. Eight presented an additional loss of symphyseal reduction. Mean Majeed´s score (MMS) in patients with and without FF was 64.4 ± 13.04 and 81.8 ± 15.65, respectively (p = 0.0012). Differences in MMS in patients without FF and those with FF and maintained or loss of anterior reduction were 11.3 [70.5 vs 81.8] (p = 0.092) and 22.7 [59.1 vs 81.8] (p = 0.001), respectively. Significant association of FF with AO classification was noted. (OR 12.6; p = 0.002).

Conclusions

Differences in MMS in the analyzed groups suggest that loss of reduction might be more relevant than failure of the anterior osteosynthesis in functional outcomes.

Bone mineral density modeling via random field: Normality, stationarity, sex and age dependence

BACKGROUND AND OBJECTIVE

Capturing the population variability of bone properties is of paramount importance to biomedical engineering. The aim of the present paper is to describe variability and correlations in bone mineral density with a spatial random field inferred from routine computed tomography data.

METHODS

Random fields were simulated by transforming pairwise uncorrelated Gaussian random variables into correlated variables through the spectral decomposition of an age-detrended correlation matrix. The validity of the random field model was demonstrated in the spatiotemporal analysis of bone mineral density. The similarity between the computed tomography samples and those generated via random fields was analyzed with the energy distance metric.

RESULTS

The random field of bone mineral density was found to be approximately Gaussian/slightly left-skewed/strongly right-skewed at various locations. However, average bone density could be simulated well with the proposed Gaussian random field for which the energy distance, i.e., a measure that quantifies discrepancies between two distribution functions, is convergent with respect to the number of correlation eigenpairs.

CONCLUSIONS

The proposed random field model allows the enhancement of computational biomechanical models with variability in bone mineral density, which could increase the usability of the model and provides a step forward in in-silico medicine.

Can locking plate fixation of symphyseal disruptions allow early weight bearing?

INTRODUCTION

Anterior pubic symphyseal plate fixation is the recommended treatment for disruption of pubic symphysis in an unstable pelvic ring injury. The rigid construct offered by locking symphyseal plate has the theoretical advantage of allowing patients to weight bear early. However, there are concerns of catastrophic failure about the locked plate construct. The purpose of the study was to establish if locking plate fixation for pubic symphysis disruption was effective to allow patients to mobilise weight bearing immediately after surgery.

PATIENT AND METHODS

Retrospective analysis of a prospectively collected database from a single centre was performed. The study period was from 2008 to 2017. Radiographic evidence of fixation failure, revision surgery, removal of metalwork and follow up duration was noted.

RESULTS

We identified 46 patients (F:M 8:38) with a mean age of 46 years (range 14 to 74 years). Based on the mechanism of injury patients were classified into Antero-posterior compression (28), Vertical shear [10], lateral compression [4] and combined mechanism [4]. Either a 4-hole or 6-hole locking plate was used in all patients, depending on fracture extension. Posterior fixation was required in 28 (61%) patients. All patients were allowed to fully or partial weight bear. The mean radiological follow-up period was 31 weeks with 13 (28%) patients having evidence of radiological failure. Revision was performed in 1 (2%) patient, in whom the screws had pulled out of the bone. The most common mode of failure was either the screw backing out from the plate or broken screw. Among the 4 (8%) patients who had their metalwork removed, 1 (2%) had delayed onset of infection, 2 (4%) had symptoms related to backed out screw and 1 (2%) opted electively to have metalwork removed.

CONCLUSIONS

With our series of patients, we have found that using locking plate for pubic symphyseal diastasis is safe and effective in allowing patients to weight bear early. A low complication rate and need for re-operation is demonstrated.

Failure of internal fixation of the anterior ring for unstable pelvic fractures, the experience of a single institute

Background

This study aimed to share our experience of anterior ring fixation failure for unstable pelvic fractures and propose corresponding treatment strategies.

Materials

From January 2009 to December 2018, 93 charts of patients with pelvic fractures were retrospectively reviewed. Patients with failure of the anterior ring internal fixation within 3 months after initial surgery were analyzed. Quality of reduction was evaluated using the Majeed scoring system. Patients aging ≥ 18 years, with unstable pelvic fractures, Tile classification type B and type C pelvic fractures, combined injury of other organs that did not affect the operation and without important neurovascular damage were included. The exclusion criteria included: (1) pathological fracture, or combined with pelvic bone tumor or severe osteoporosis; (2) femoral fracture and thoracolumbar fracture; (3) open pelvic fracture; (4) Morel-Lavallée injury; (5) complicated acetabular fracture. The quality of the reduction of the anterior pelvic ring injury was evaluated on the x-ray film using the Majeed scoring system.

Results

According to the Tile classification of fracture, there were 23 cases of type B1, 17 cases of type B2, 11 cases of type B3, 28 cases of type C1, 6 cases of type C2, and 8 cases of type C3. The duration from injury to pelvic internal fixation ranged from 5 to 28 days. Seven out of 93 patients experienced failure of internal fixation of the anterior pelvic ring within 3 months, including 2 patients fixed with an external fixator and 5 patients fixed with a plate. Five patients undergoing revision surgery were followed up for 6–36 months with an average of 18 months. According to Majeed’s score at the last follow-up in the 5 patients undergoing revision surgery, there were 2 cases of excellent, 2 cases of good, 1 case of fair. The excellent and good rate reached 80%.

Conclusion

The treatment of complicated unstable pelvic fractures requires performing internal fixation surgery within 2 weeks. It is necessary to make a preoperative plan and stabilize the posterior ring first, avoiding a single steel plate crossing the pubic symphysis.

Trans-obturator cable fixation of open book pelvic injuries

Operative treatment of ruptured pubic symphysis by plating is often accompanied by complications. Trans-obturator cable fixation might be a more reliable technique; however, have not yet been tested for stabilization of ruptured pubic symphysis. This study compares symphyseal trans-obturator cable fixation versus plating through biomechanical testing and evaluates safety in a cadaver experiment. APC type II injuries were generated in synthetic pelvic models and subsequently separated into three different groups. The anterior pelvic ring was fixed using a four-hole steel plate in Group A, a stainless steel cable in Group B, and a titan band in Group C. Biomechanical testing was conducted by a single-leg-stance model using a material testing machine under physiological load levels. A cadaver study was carried out to analyze the trans-obturator surgical approach. Peak-to-peak displacement, total displacement, plastic deformation and stiffness revealed a tendency for higher stability for trans-obturator cable/band fixation but no statistical difference to plating was detected. The cadaver study revealed a safe zone for cable passage with sufficient distance to the obturator canal. Trans-obturator cable fixation has the potential to become an alternative for symphyseal fixation with less complications.

The role of anterior supra-acetabular external fixator as definitive treatment for anterior ring fixation in unstable pelvic fractures

PURPOSE

Management of anterior ring injuries is still a matter of discussion, and there are only few studies reporting anterior external fixator as definitive treatment for unstable pelvic injuries. This study aimed to describe the clinical and radiological outcomes of a consecutive series of mechanically unstable pelvic injuries that were treated with definitive anterior supra-acetabular external fixator for the anterior ring, and to identify risk factors for failure.

METHODS

We included a consecutive series of patients with unstable pelvic ring fractures who underwent anterior supra-acetabular external fixation for definitive treatment, between January 2012 and January 2020. All demographics, associated injuries and procedures, injury mechanism, and complications were analysed. Pelvic fracture was classified based on Orthopaedic Trauma Association/Tile AO (OTA/AO) and Young-Burgess classifications. Complications associated with the external fixator were revised. All patients were functionally evaluated at final follow-up and asked to report their clinical outcomes using the Majeed score.

RESULTS

A total of 47 patients were included, of which 25 were females. The median age was 44 years (interquartile range 23-59). Median follow-up duration was 14 months (interquartile range 6-31). The most frequent aetiology was motor vehicle accident (35), followed by fall from height (8). All fractures required posterior pelvic ring fixation. The median time during which patients had external fixation in situ was 11 weeks (interquartile range 9-13). All patients achieved healing of pelvic fracture at median time of 10 weeks (interquartile range 8-12). At final follow-up, the median displacement of the anterior pelvis was 6 mm (interquartile range 0-11). Superficial infection was the most common complication (n = 7). No washout procedures were needed. No major complication was reported. No patient required reoperation for anterior ring fracture. The median Majeed score was 88 points (range 60-95; interquartile range 80-90) at final follow-up.

CONCLUSION

Our findings suggest that the use of supra-acetabular external fixator is safe and effective for definitive treatment of the anterior ring in unstable pelvic fractures. It is a method with high proportion of excellent results, regardless of the type of fracture. The rate of complications is low, and it does not compromise functional results.

Plate fixation of the anterior pelvic ring in patients with fragility fractures of the pelvis

Introduction

In fragility fractures of the pelvis (FFP), fractures of the posterior pelvic ring are nearly always combined with fractures of the anterior pelvic ring. When a surgical stabilization of the posterior pelvis is performed, a stabilization of the anterior pelvis is recommended as well. In this study, we aim at finding out whether conventional plate osteosynthesis is a valid option in patients with osteoporotic bone.

Materials and methods

We retrospectively reviewed medical charts and radiographs of all patients with a FFP, who underwent a plate osteosynthesis of the anterior pelvic ring between 2009 and 2019. Patient demographics, fracture characteristics, properties of the osteosynthesis, complications and revision surgeries were documented. Single plate osteosynthesis (SPO) at the pelvic brim was compared with double plate osteosynthesis (DPO) with one plate at the pelvic brim and one plate anteriorly. We hypothesized that the number and severity of screw loosening (SL) or plate breakage in DPO are lower than in SPO.

Results

48 patients with a mean age of 76.8 years were reviewed. In 37 cases, SPO was performed, in 11 cases DPO. Eight out of 11 DPO were performed in patients with FFP type III or FFP type IV. We performed significantly more DPO when the instability was located at the level of the pubic symphysis (p = 0.025). More patients with a chronic FFP (surgery more than one month after diagnosis) were treated with DPO (p = 0.07). Infra-acetabular screws were more often inserted in DPO (p = 0.056). Screw loosening (SL) was seen in the superior plate in 45% of patients. There was no SL in the anterior plate. There was SL in 19 of 37 patients with SPO and in 3 of 11 patients with DPO (p = 0.16). SL was localized near to the pubic symphysis in 19 of 22 patients after SPO and in all three patients after DPO. There was no SL in DPO within the first month postoperatively. We performed revision osteosynthesis in six patients (6/48), all belonged to the SPO group (6/37). The presence of a bone defect, unilateral or bilateral anterior pelvic ring fracture, post-operative weight-bearing restrictions, osteosynthesis of the posterior pelvic ring, and the presence of infra- or supra-acetabular screws did not significantly influence screw loosening in SPO or DPO.

Conclusion

There is a high rate of SL in plate fixation of the anterior pelvic ring in FFP. In the vast majority, SL is located near to the pubic symphysis. DPO is associated with a lower rate of SL, less severe SL and a later onset of SL. Revision surgery is less likely in DPO. In FFP, we recommend DPO instead of SPO for fixation of fractures of the anterior pelvic ring, which are located in or near to the pubic symphysis.

The effect of age and sex on pelvic bone density measured opportunistically in clinical CT scans

Unstable pelvic ring fractures are severe and complex injuries, and surgical fixation is challenging and can be complicated by early failure due in part to difficulties with securely fixing screws in low-density bone. There is limited information in the literature about how the density distribution across the pelvic bones changes with age and sex. In this study, we used 60 sets of calibrated bone density measurements obtained opportunistically from clinical computed tomography scans of the pelvis. Three-dimensional models of the innominate bone were produced and the effects of age and sex on cortical bone density modeled. Overall trends and regions where these factors had a significant effect were identified, and the results visualized. Across the entire innominate bone, the mean loss of density was found to be 1.6 mg/cc per year, with several specific areas (pubic body, iliac fossa, posterior ilium, and anterior inferior iliac spine for example) showing significant rates of loss up to three times greater than the rest of the bone. Areas significantly affected by sex included the posterior pubic root, anterior aspect of the pubic body, and iliac crest. Despite overall trends of attenuation, there remains significant variability between individuals. This supports the need to further explore subject-specific planning tools for pelvic fracture repair. Statement of clinical significance: Bone density changes across the innominate bone due to age and sex tend to vary between individuals, although consistent effects were seen at specific regions. This information may help in surgical planning of unstable fracture repairs.

[Outcome after plate stabilization of symphyseal diastasis]

Hintergrund

Die Symphysensprengung mit entsprechender Diastase kann durch eine Symphysenplatte stabilisiert werden.

Fragestellung

Welche Beckenverletzungen werden mit einer Symphysenplatte stabilisiert und wie ist das Outcome?

Material und Methoden

Retrospektive Auswertung von 64 Patienten über einen Untersuchungszeitraum von 24 Monaten.

Ergebnisse

Es waren 56 Patienten männlich, 8 weiblich und das mittlere Alter betrug 44 Jahre (SD ± 17). Unfälle im Straßenverkehr waren der führende Grund für die Beckenverletzung. Die Verteilung nach AO-Klassifikation zeigte sich wie folgt: 14-mal B1-, 10-mal B2-, 5‑mal B3-, 23-mal C1-, 9‑mal C2- und 3‑mal C3-Verletzungen. Die Verteilung nach Young und Burgess ergab: 9‑mal APC-I-, 18-mal APC-II-, 13-mal APC-III-, 9‑mal LC-I-, 3‑mal LC-II-, 2‑mal LC-III- und 10-mal VS-Verletzungen. Der mittlere Injury Severity Score (ISS) betrug 32 und die mittlere stationäre Verweildauer 29 Tage (pos. Korrelation p ≤ 0,001). Im Verlauf war eine radiologische Implantatlockerung bei 52 Patienten nachweisbar. Therapierelevante Komplikationen gab es in 14 Fällen. Hierbei war das Implantatversagen (n = 8) der Hauptgrund für eine operative Revision.

Diskussion

Obwohl die radiologische Implantatlockerung häufig beobachtet wird, ist sie nur selten Grund für einen Revisionseingriff. Kommt es hingegen zum vollständigen Implantatversagen, tritt dies meist innerhalb der ersten postoperativen Wochen auf und ist revisionsbedürftig. Eine frühzeitige Abklärung durch Röntgenbildgebung sollte bei Verdacht erfolgen.

Symphyseal plate with trans-symphyseal cross-screws for fixation of tile-type B1 pelvic ring injuries: radiological and functional evaluation

INTRODUCTION

Failure to neutralize the different physiological forces acting on the inferior as well as the superior regions of the pubic symphysis, the long healing time, is blamed for the repeated failures of conventional superior symphyseal plating.

MATERIAL AND METHODS

A three years prospective case series study between January 2017 and December 2019 was done, to evaluate the radiological and the functional outcomes, using Matta/Tornetta and Majeed criteria respectively, of the combination of trans-symphyseal cross-screws configuration and superior symphyseal plate in Tile-type B1 pelvic injuries.

RESULTS

Thirty patients, 18 with anteroposterior compression type II and 12 with type III, with a mean follow-up of 20 months ±5 were included. Radiologically, 26 (86.6%) cases showed an excellent, one (3.3%) good and three (10%) fair outcome. Clinically, excellent outcome in 26 (86.6%) cases, good in two (6.6%) cases, and fair in two (6.6%). Intra-operative drill bit breakage occurred in three (10%) cases and was the only reported technical complication. Significant re-displacement was reported in three (10%) cases.

CONCLUSION

The open trans-symphyseal cross-screws for fixation of the superior symphyseal plate is a simple, efficient, and safe technique with the biomechanical advantages of an extra-fixation point to the inferior symphysis together with a long and a strong bony anchorage.

A novel internal fixation method for open book injuries of the pubic symphysis- A biomechanical analysis

BACKGROUND

Pelvic fractures in adults are common injuries and account for up to 3.64% of all fractures. Usually, the treatment of open book injuries (Types B1.1 and B1.2 AO-Classification) is open reduction and plate stabilization using dynamic compression plates, with or without interlocking screws. These implants seem to enhance the outcome of such injuries, but also variety of complications occurs. To reduce complications and achieve appropriate reduction and stabilization, this study compared established stabilization techniques to a novel minimally invasive internal fixation method using an internal fixator system that is already being utilized for spinal fractures.

METHODS

This study was performed on 32 composite pelvises in a bilateral stance biomechanical model. The pelvises were variously stabilized with an internal fixator, a 4.5 mm dynamic compression plate and a 3.5 mm symphyseal locking dynamic compression plate. The contact area and loading forces were assessed by a sensor film inside the symphyseal gap.

FINDINGS

This study showed significantly greater reduction and loading capabilities of the internal fixator compared to the other implants (p < 0.05). There was also significantly greater contact area with the use of an internal fixator compared to the other implants (p < 0.05). The 3.5 mm interlocking plate showed significantly greater contact area compared to the 4.5 mm plate (p < 0.05).

INTERPRETATION

The internal fixator that is already proven in spinal surgery is biomechanically superior to conventional implants used in pelvic surgery. The contact area analysis furthermore showed a more physiological loading pattern, which can improve ligamentous healing in a clinical context.

Stabilization of a Type B1.1 Injury in a Morbidly Obese Patient Using an Internal Fixator in a Minimally Invasive Technique: A Case Report

CASE

In this case report, we present a novel stabilization technique of the pubic symphysis using an internal spinal fixator in a 78-year-old morbidly obese woman having a pelvic disruption type B1.1 (AO classification). We treated the disruption using an internal fixator to reduce the extent of the incision and soft-tissue damage.

CONCLUSIONS

The use of an internal fixator, known from percutaneous spinal fixation, for the stabilization of the pubic symphysis in cases of disruption ("open book" injuries) may be an alternative to the standard plate fixation as a novel minimally invasive stabilization technique.

Current Trends in the Surgical Treatment of Open-Book Pelvic Ring Injuries: An International Survey Among Experienced Trauma Surgeons

INTRODUCTION

In the open-book, rotationally unstable (OTA/AO type 61-B1.1) pelvic ring injury, the posterior sacroiliac complex is believed to remain intact. Therefore, anterior ring stabilization alone has been the standard treatment recommendation. However, treatment failures using this method have caused a reconsideration of this management strategy. Anterior plus posterior fixation is the main alternative. In the absence of any specific new guidelines, the choice of treatment currently relies on the preference of the treating surgeon. The objective of this survey was to determine the relative use of anterior plus posterior fixation, as opposed to the standard anterior fixation alone, for the treatment of open-book pelvic ring injuries.

METHODS

An international group of 176 practicing trauma surgeons experienced in pelvic ring fracture fixation participated in an AO Foundation survey asking for their preferred standard surgical fixation (anterior alone or anterior plus posterior combined) for OTA/AO type 61-B1.1 open-book pelvic fractures.

RESULTS

Anterior plate fixation alone (group 1) was preferred by 56% of the survey participants, and combined anterior plus posterior fixation (group 2) was preferred by 44%. Statistical analysis revealed that group 1 participants were significantly older than group 2 participants (P = 0.03) and had more years of surgical experience (P = 0.02).

CONCLUSIONS

Concern regarding the inadequacy of anterior fixation alone has led many surgeons, especially those more recently in practice, to add posterior fixation, despite limited data to determine its indications. No doubt the OTA/AO type B 1.1 pelvic ring disruption actually represents a wide spectrum of injury. Further study is needed to determine the best fixation method.

Does Posterior Fixation of Partially Unstable Open-Book Pelvic Ring Injuries Decrease Symphyseal Plate Failure? A Biomechanical Study

OBJECTIVE

Recent clinical study suggests an advantage to adding an iliosacral screw to the anterior fixation construct for anteroposterior compression type-2 (OTA/AO type 61-B1), partially unstable open-book pelvic ring injuries. Others have described stress examination to determine any required supplemental fixation. However, biomechanical studies investigating iliosacral fixation requirements for this injury are lacking. Our objective was to determine whether adding an iliosacral screw to symphyseal plate fixation decreases displacement in a well-defined open-book pelvic ring injury model.

METHODS

An open-book pelvic ring injury was created in 10 human cadaveric pelves by unilaterally releasing the sacrospinous, sacrotuberous, and anterior sacroiliac ligaments plus transection of the pubic symphysis, approximating the classically described anteroposterior compression type-2 (APC-2) injury. Specimens were divided into 2 groups: (1) symphyseal plating and (2) plating plus an iliosacral screw. Using a standard bilateral stance model loaded at 550 N, displacement measurements were obtained at 210,000 and 500,000 cycles.

RESULTS

Three specimens failed before 210,000 cycles because of technical errors and were excluded from analysis. For the remaining 7, there was no significant difference in displacement between the 2 groups, and none sustained implant failure. Post hoc analysis showed that a large sample size (45/group) would be required to detect any difference with 80% power, indicating a small effect size with limited clinical application.

CONCLUSIONS

Adding an iliosacral screw to the symphyseal plate fixation does not provide improved biomechanical outcome in classically described APC-2 injuries. Clinically, stress examination may be useful to determine the need for supplemental posterior fixation in APC-2 injuries.

Symphyseal fixation in open book injuries cannot fully compensate anterior SI joint injury-A biomechanical study in a two-leg alternating load model

INTRODUCTION

In open book injuries type Tile B1.1 or B1.2 also classified as APC II (anteroposterior compression), it remains controversial, if a fixation of the anterior ring provides sufficient stability or a fixation of the posterior ring should be included. Therefore the relative motion at the sacroiliac joint was quantified in a two-leg alternating load biomechanical pelvis model in the intact, the injured and the restored pelvis.

METHODS

Fresh-frozen intact (I) pelvises (n = 6) were subjected to a non-destructive cyclic test under sinosuidal axial two-leg alternating load with progressively increasing amplitude. Afterwards an open book injury (J) including the anterior ligament complex of the left sacroiliac joint, the sacrospinal and sacrotuberal ligaments (Tile B1.1) was created and the specimens were retested. Finally, the symphysis was stabilized with a modular fixation system (1-, 2- or 4-rod configuration) (R) and specimens were cyclically retested. Relative motion at the sacroiliac joint was captured at both sacroiliac joints by motion tracking system at two load levels of 170 N and 340 N during all tests.

RESULTS

Relative sacroiliac joint movements at both load levels were significantly higher in the J-state compared to the I-state, excluding superoinferior translational movement. With exception of the anteroposterior translational movement at 340N, the relative sacroiliac joint movements after each of the three reconstructions (1-, 2-, 4-rod fixation) were significantly smaller compared to the J-state and did not differ significantly to the I-state, but stayed above the values of the latter. Relative movements did not differ significantly in a direct comparison between the 1-rod, 2-rod and 4-rod fixations.

CONCLUSION

Symphyseal locked plating significantly reduces relative movement of the sacroiliac joint in open book injuries type Tile B1.1 or B1.2 (APC II) but cannot fully restore the situation of the intact sacroiliac joint.