Synthesis of core-shell nanowires of FeCoNi alloy core with silicon oxide layers

Tuning the physical properties of ternary alloys (NiCuCo) for in vitro magnetic hyperthermia: experimental and theoretical investigation

Most of published research on magnetic hyperthermia focused on iron oxides, ferrites, and binary alloy nanostructures, while the ternary alloys attracted much limited interest. Herein, we prepared NiCuCo ternary alloy nanocomposites with variable compositions by mechanical alloying. Physical properties were fully characterized by XRD, Rietveld analysis, XPS, SEM/EDX, TEM, ZFC/FC and H-M loops. DFT calculations were used to confirm the experimental results in terms of structure and magnetism. The results showed that the fabricated nanoalloys are face centered cubic (FCC) with average core sizes of 9-40 nm and behave as superparamagnetic with saturation in the range 4.67-42.63 emu/g. Langevin fitting corroborated the superparamagnetic behavior, while law of approach to saturation (LAS) was used to calculate the magnetic anisotropy constants. Heating effciencies were performed under an alternating magnetic field (AMF, H0 = 170 Oe and f = 332.5 kHz), and specific absorption rate (SAR) values were determined. The highest magnetic saturation (Ms), heating potentials, and SAR values were attained for Ni35Cu30Co35 containing the lowest Cu but highest Ni and Co percentages, and the least for Ni15Cu70Co15. Importantly, the nanoalloys reached the required temperatures for magnetic hyperthermia (42 °C) in relatively short times. We also showed that heat dissipiation can be simply tuned by changing many parameters such as concentration, field amplitude, and frequency. Finally, cytotoxicity viability assays against two different breast cancer cell lines treated with Ni25Cu50Co25 nanoalloy in the presence and absence of AMF were investigated. No significant decrease in cancer cell viability was observed in the absence of AMF. When tested against tumorigenic KAIMRC2 breast cancer cells under AMF, the NiCuCo nanoalloy was found to be highly potent to the cells (~ 2-fold enhancement), killing almost all the cells in short times (20 min) and clinically-safe AC magnetic fields. These findings strongly suggest that the as-prepared ternary NiCuCo nanoalloys hold great promise for potential magnetically-triggered cancer hyperthermia.

Electrodeposition of Complex High Entropy Oxides via Water Droplet Formation and Conversion to Crystalline Alloy Nanoparticles

A combination of electrodeposition and thermal reduction methods have been utilized for the synthesis of ligand-free FeNiCo alloy nanoparticles through a high-entropy oxide intermediate. These phases are of great interest to the electrocatalysis community, especially when formed by a sustainable chemistry method. This is successfully achieved by first forming a complex five element amorphous FeNiCoCrMn high-entropy oxide (HEO) phase via electrodeposition from a nanodroplet emulsion solution of the metal salt reactants. The amorphous oxide phase is then thermally treated and reduced at 570-600 °C to form the crystalline FeNiCo alloy with a separate CrMnO_x cophase. The FeNiCo alloy is fully characterized by scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy elemental analysis and is identified as a face-centered cubic crystal with the lattice constant a = 3.52 Å. The unoptimized, ligand-free FeNiCo NPs activity toward the oxygen evolution reaction is evaluated in alkaline solution and found to have an ∼185 mV more cathodic onset potential than the Pt metal. Beyond being able to synthesize highly crystalline, ligand-free FeNiCo nanoparticles, the demonstrated and relatively simple two-step process is ideal for the synthesis of tailor-made nanoparticles where the desired composition is not easily achieved with classical solution-based chemistries.

The synthesis and fabrication of one-dimensional nanoscale heterojunctions

There are a variety of methods for synthesizing or fabricating one-dimensional (1D) nanostructures containing heterojunctions between different materials. Here we review recent developments in the synthesis and fabrication of heterojunctions formed between different materials within the same 1D nanostructure or between different 1D nanostructures composed of different materials. Structures containing 1D nanoscale heterojunctions exhibit interesting chemistry as well as size, shape, and material-dependent properties that are unique when compared to single-component materials. This leads to new or enhanced properties or multifunctionality useful for a variety of applications in electronics, photonics, catalysis, and sensing, for example. This review separates the methods into vapor-phase synthesis, solution-phase synthesis, template-based synthesis, and other approaches, such as lithography, electrospinning, and assembly. These methods are used to form a variety of heterojunctions, including segmented, core/shell, branched, or crossed, from different combinations of semiconductor, metal, carbon, and polymeric materials.

Synthesis and characterization of highly ordered cobalt-magnetite nanocable arrays

Magnetically tunable, high-density arrays of coaxial nanocables within anodic aluminum oxide (AAO) membranes have been synthesized. The nanocables consist of magnetite nanowires surrounded by cobalt nanotube sheaths and cobalt nanowires surrounded by magnetite nanotube sheaths. These materials are a combination of separate hard (Co) and soft (Fe3O4) magnetic materials in a single nanocable structure. The combination of two or more magnetic materials in such a radial structure is seen as a very powerful tool for the future fabrication of magnetoresistive, spin-valve and ultrafast spin-injection devices with nonplanar geometries. The nanocable arrays were prepared using a supercritical-fluid inclusion process, whereby the nanotube was first deposited onto the pore walls of the nanoporous membranes and subsequently filled with core material to form coaxial nanocables. In essence, this paper describes a technique for placing novel magnetic technologies into well-defined building blocks that may ultimately lead to new multifunctional devices, such as spin valves and high-density magnetic storage devices.

Magnetic properties of epsilon-Fe(3)N-GaN core-shell nanowires

epsilon-Fe(3)N-GaN core-shell nanowires are synthesized by the wet chemical route and by nitridation of the Fe-Ga-oxide nanowires in flowing NH(3) (g). The encapsulation by the GaN shell protects the epsilon-Fe(3)N core and spin-glass-like cooperative ordering is observed at low temperatures. Magnetic disorder occurs at the epsilon-Fe(3)N-GaN interface, giving rise to the spin-glass-like state below 50 K because of the presence of anti-ferromagnetic (AF) mixed oxynitrides and ferromagnetic (FM) epsilon-Fe(3)N nitride and the random distribution of epsilon-Fe(3)N in the interface region. The spin-glass-like ordering is probed by relaxation and ac susceptibility experiments.