MoS2/CdS/TiO2 ternary composite incorporated into carbon nanofibers for the removal of organic pollutants from water

Sustainable and Low-Cost Electrodes for Photocatalytic Fuel Cells

Water pollutants harm ecosystems and degrade water quality. At the same time, many pollutants carry potentially valuable chemical energy, measured by chemical oxygen demand (COD). This study highlights the potential for energy harvesting during remediation using photocatalytic fuel cells (PCFCs), stressing the importance of economically viable and sustainable materials. To achieve this, this research explores alternatives to platinum cathodes in photocathodes and aims to develop durable, cost-effective photoanode materials. Here, zinc oxide nanorods of high density are fabricated on carbon fiber surfaces using a low-temperature aqueous chemical growth method that is simple, cost-efficient, and readily scalable. Alternatives to the Pt cathodes frequently used in PCFC research are explored in comparison with screen-printed PEDOT:PSS cathodes. The fabricated ZnO/carbon anode (1.5 × 2 cm2) is used to remove the model pollutant used here and salicylic acid from water (30 mL, 70 μM) is placed under simulated sunlight (0.225 Sun). It was observed that salicylic acid was degraded by 23 ±0.46% at open voltage (OV) and 43.2 ± 0.86% at 1 V with Pt as the counter electrode, degradation was 18.5 ± 0.37% at open voltage (OV) and 44.1 ± 0.88% at 1 V, while PEDOT:PSS was used as the counter electrode over 120 min. This shows that the PEDOT:PSS exhibits an excellent performance with the full potential to provide low-environmental-impact electrodes for PCFCs.

Molybdenum Modified Sol–Gel Synthesized TiO2 for the Photocatalytic Degradation of Carbamazepine under UV Irradiation

Pharmaceutical CEC compounds are a potential threat to man, animals, and the environment. In this study, a sol–gel-derived TiO2 (SynTiO2) was produced and subsequently sonochemically doped with a 1.5 wt% Mo to obtain the final product (Mo (1.5 wt%)/SynTiO2). The as-prepared materials were characterized for phase structure, surface, and optical properties by XRD, TEM, N2 adsorption–desorption BET isotherm at 77 K, and PSD by BJH applications, FTIR, XPS, and UV-Vis measurements in DRS mode. Estimated average crystallite size, particle size, surface area, pore-volume, pore size, and energy bandgap were 16.10 nm, 24.55 nm, 43.30 m2/g, 0.07 cm3/g, 6.23 nm, and 3.05 eV, respectively, for Mo/SynTiO2. The same structural parameters were also estimated for the unmodified SynTiO2 with respective values of 14.24 nm, 16.02 nm, 133.87 m2/g, 0.08 cm3/g, 2.32 nm, and 3.3 eV. Structurally improved (Mo (1.5 wt%)/SynTiO2) achieved ≈100% carbamazepine (CBZ) degradation after 240 min UV irradiation under natural (unmodified) pH conditions. Effects of initial pH, catalyst dosage, initial pollutant concentration, chemical scavengers, contaminant ions, hydrogen peroxide (H2O2), and humic acid (HA) were also investigated and discussed. The chemical scavenger test was used to propose involved photocatalytic degradation process mechanism of CBZ.

Recent advance in the fabrication of carbon nanofiber-based composite materials for wearable devices

Carbon nanofibers (CNFs) exhibit the advantages of high mechanical strength, good conductivity, easy production, and low cost, which have shown wide applications in the fields of materials science, nanotechnology, biomedicine, tissue engineering, sensors, wearable electronics, and other aspects. To promote the applications of CNF-based nanomaterials in wearable devices, the flexibility, electronic conductivity, thickness, weight, and bio-safety of CNF-based films/membranes are crucial. In this review, we present recent advances in the fabrication of CNF-based composite nanomaterials for flexible wearable devices. For this aim, firstly we introduce the synthesis and functionalization of CNFs, which promote the optimization of physical, chemical, and biological properties of CNFs. Then, the fabrication of two-dimensional and three-dimensional CNF-based materials are demonstrated. In addition, enhanced electric, mechanical, optical, magnetic, and biological properties of CNFs through the hybridization with other functional nanomaterials by synergistic effects are presented and discussed. Finally, wearable applications of CNF-based materials for flexible batteries, supercapacitors, strain/piezoresistive sensors, bio-signal detectors, and electromagnetic interference shielding devices are introduced and discussed in detail. We believe that this work will be beneficial for readers and researchers to understand both structural and functional tailoring of CNFs, and to design and fabricate novel CNF-based flexible and wearable devices for advanced applications.

Transition metal sulfides meet electrospinning: versatile synthesis, distinct properties and prospective applications

One-dimensional (1D) electrospun nanomaterials have attracted significant attention due to their unique structures and outstanding chemical and physical properties such as large specific surface area, distinct electronic and mass transport, and mechanical flexibility. Over the past years, the integration of metal sulfides with electrospun nanomaterials has emerged as an exciting research topic owing to the synergistic effects between the two components, leading to novel and interesting properties in energy, optics and catalysis research fields for example. In this review, we focus on the recent development of the preparation of electrospun nanomaterials integrated with functional metal sulfides with distinct nanostructures. These functional materials have been prepared via two efficient strategies, namely direct electrospinning and post-synthesis modification of electrospun nanomaterials. In this review, we systematically present the chemical and physical properties of the electrospun nanomaterials integrated with metal sulfides and their application in electronic and optoelectronic devices, sensing, catalysis, energy conversion and storage, thermal shielding, adsorption and separation, and biomedical technology. Additionally, challenges and further research opportunities in the preparation and application of these novel functional materials are also discussed.

Decoration of Zinc Oxide Nanorods into the Surface of Activated Carbon Obtained from Agricultural Waste for Effective Removal of Methylene Blue Dye

Zinc oxide (ZnO) nanorods incorporated activated carbon (AC) composite photocatalyst was synthesized using a hydrothermal process. The AC was prepared from lapsi (Choerospondias axillaris) seed stone, an agricultural waste product, found in Nepal by the chemical activation method. An aqueous suspension of AC with ZnO precursor was subjected to the hydrothermal treatment at 140 °C for 2 h to decorate ZnO rods into the surface of AC. As-obtained ZnO nanorods decorated activated carbon (ZnO/AC) photocatalyst was characterized by various techniques, such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) spectroscopy. Results showed that highly crystalline hexagonal ZnO nanorods were effectively grown on the surface of porous AC. The photocatalytic property of the as-prepared ZnO/AC composite was studied by degrading methylene blue (MB) dye under UV-light irradiation. The ZnO/AC composite showed better photocatalytic property than that of the pristine ZnO nanorods. The enhanced photocatalytic performance in the case of the ZnO/AC composite is attributed to the combined effects of ZnO nanorods and AC.

Synthesis and Characterization of ZnO-TiO2/Carbon Fiber Composite with Enhanced Photocatalytic Properties

Herein, we prepared a novel photocatalytic ZnO-TiO2 loaded carbon nanofibers composites (ZnO-TiO2-CNFs) via electrospinning technique followed by a hydrothermal process. At first, the electrospun TiO2 NP-embedded carbon nanofibers (TiO2-CNFs) were achieved using electrospinning and a carbonization process. Next, the ZnO particles were grown into the TiO2-CNFs via hydrothermal treatment. The morphology, structure, and chemical compositions were studied using state-of-the-art techniques. The photocatalytic performance of the ZnO-TiO2-CNFs composite was studied using degrading methylene blue (MB) under UV-light irradiation for three successive cycles. It was noticed that the ZnO-TiO2-CNFs nanocomposite showed better MB removal properties than that of other formulations, which might be due to the synergistic effects of carbon nanofibers and utilized metal oxides (ZnO and TiO2). The adsorption characteristic of carbon fibers and matched band potentials of ZnO and TiO2 combinedly help to boost the overall photocatalytic performance of the ZnO-TiO2-CNFs composite. The obtained results from this study indicated that it can be an economical and environmentally friendly photocatalyst.

Synthesis of Conducting Bifunctional Polyaniline@Mn-TiO2 Nanocomposites for Supercapacitor Electrode and Visible Light Driven Photocatalysis

We report a polyaniline-wrapped, manganese-doped titanium oxide (PANi/Mn-TiO2) nanoparticle composite for supercapacitor electrode and photocatalytic degradation. The PANi/Mn-TiO2 nanoparticles were synthesized using a solvothermal process, followed by oxidative polymerization of aniline. The structural properties of studied materials were confirmed by XRD, FTIR, HRTEM, FESEM, and UV visible spectroscopy. The as-prepared PANi/Mn-TiO2 nanoparticles revealed admirable electrochemical performance with a specific capacitance of 635.87 F g−1 at a current density of 1 A g−1 with a notable life cycle retention of 91% after 5000 charge/discharge cycles. Furthermore, the asymmetric cell with PANi/Mn-TiO2 as a positive electrode exhibited energy density of 18.66 W h kg−1 with excellent stability. Moreover, the PANi/Mn-TiO2 had promising photocatalytic activity for methylene blue degradation. The improved performance of PANi/Mn-TiO2 nanoparticles is attributed to the well-built synergetic effect of components that lead to significant reduction of band gap energy and charge transfer resistance, as revealed by UV visible spectroscopy and electrochemical impedance spectroscopy.

Fe1-xS Modified TiO2 NPs Embedded Carbon Nanofiber Composite via Electrospinning: A Potential Electrode Material for Supercapacitors

Fe_1-xS-TiO₂ nanoparticles embedded carbon nanofibers (Fe_1-xS-TiO₂/CNFs) composite as a supercapacitor electrode material has been reported in the present work. The Fe_1-xS-TiO₂/CNFs composite was fabricated by electrospinning technique followed by carbonization under argon atmosphere and characterized by the state-of-art techniques. The electrochemical studies were carried out in a 2 M KOH electrolyte solution. The synthesized material showed a specific capacitance value of 138 F/g at the current density of 1 A/g. Further, the capacitance retention was about 83%. The obtained results indicate that the Fe_1-xS-TiO₂/CNFs composite can be recognized as electrode material in supercapacitor.

Recent Advances in TiO2 Films Prepared by Sol-gel Methods for Photocatalytic Degradation of Organic Pollutants and Antibacterial Activities

Photocatalysis has recently emerged as an advanced, green, and eco-friendly process for the treatment of wastewater and air, and antimicrobial disinfection applications. In this context, TiO2 nanostructures have been shown to be the prominent photocatalyst candidates due to their low cost, non-toxicity, and ease of fabrication. This review highlights the investigation and development of TiO2 photocatalyst film by sol-gel method with special emphasis on the photodecolorization of synthetic dyes and antibacterial activities. Furthermore, various synthesis methods for the preparation of TiO2 films and their advantages, as well as limitations, are summarized. Finally, recent advances in TiO2 films by sol-gel method for dye degradation and antibacterial activities, challenges, and future perspective are discussed.