Nanoscale ZnO-adsorbents carefully designed for the kinetic and thermodynamic studies of Rhodamine B

Nanosorbent based on coprecipitation of ZnO in goethite for competitive sorption of Cd(II)-Pb(II) and Cd(II)-Pb(II)-Ni(II) systems

Amongst the various water pollutants, heavy metal ions require special attention because of their toxic nature and effects on humans and the environment. Preserving natural resources will have positive impacts on living conditions by reducing diseases and water treatment by nanotechnology is effective in solving this problem owing to the properties of nanomaterials. In this study, a goethite nanoparticle was prepared by hydrothermal method, while ZnO/goethite nanocomposite by co-precipitation was developed. The nanoparticles were characterized using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Transform Electron Microscopy (TEM), Thermogravimetric Differential Thermal Analysis (TGA-DTA), Dynamic Light Scattering (DLS), and Breunner-Emmet-Teller (BET) surface area analysis. The adsorption of Cd(II)-Pb(II) and Cd(II)-Pb(II)-Ni(II) ions systems on ZnO/goethite nanocomposite was investigated in a batch mode. The findings of the study showed that nanoparticles ZnO/goethite composite were mixed of spherical and rod-like shapes. The BET results revealed average particle sizes of 41.11 nm for nanoparticles for ZnO/goethite while TGA/DTA confirmed the stability of the adsorbents. The optimum adsorption capacities of the nanocomposite for Pb(II), Cd(II), and Ni(II) ions from the Pb-Cd-Ni ternary system were 415.5, 195.3, and 87.13 mg g-1, respectively. The adsorption isotherm data fitted well with the Langmuir isotherm model. The study concluded that the nanoparticle adsorbents are efficient for the remediation of toxic pollutants and are, therefore, recommended for wastewater treatment.

Green and Low-Cost Modified Pisha Sandstone Geopolymer Gel Materials for Ecological Restoration: A Phase Review

Pisha sandstone (PS) is a special interbedded rock in the middle reaches of the Yellow River that experiences severe weathering and is loose and broken. Due to severe multiple erosion events, the Pisha sandstone region is called "the most severe water loss and soil erosion in the world" and "the ecological cancer of the earth". As a special pozzolanic mineral, PS has the potential to be used as precursors for the synthesis of green and low-carbon geopolymer gel materials and applied in ecological restoration. This paper aims to undertake a phase review of the precursors for geopolymer gel materials. The genesis and distribution, physical and chemical characterization, erosion characteristics, and advances in the ecological restoration of PS are all summarized. Furthermore, current advances in the use of PS for the synthesis of geopolymer gel materials in terms of mechanical properties and durability are discussed. The production of Pisha sandstone geopolymer gels through the binder jetting technique and 3D printing techniques is prospected. Meanwhile, the prospects for the resource application of PS in mine rehabilitation and sustainable ecology are discussed. In the future, multifactor-driven comprehensive measures should be further investigated in order to achieve ecological restoration of the Pisha sandstone region and promote high-quality development of the Yellow River Basin.

Chitosan-Supported ZnO Nanoparticles: Their Green Synthesis, Characterization, and Application for the Removal of Pyridoxine HCl (Vitamin B6) from Aqueous Media

A composite of chitosan-supported ZnO nanoparticles (ZnO/CS) was green-synthesized via an easy and cost-effective method using Chicory (Cichorium intybus) plant extract. The synthesis was confirmed using uv-vis spectrometry at a λmax of 380 nm, and the surface of the material was characterized via FT-IR spectroscopy, and finally via SEM, which confirmed the distribution of ZnO nanoparticles on the surface of chitosan biopolymer (CS). The synthesized material was applied in the adsorptive removal of residues of the pyridoxine hydrochloride (vitamin B6) pharmaceutical drug from aqueous media using the batch technique. The material's removal capacity was studied through several adjustable parameters including pH, contact time, the dose of the adsorbent, and the capacity for drug adsorption under the optimal conditions. Langmuir and Freundlich isotherms were applied to describe the adsorption process. The removal was found to obey the Freundlich model, which refers to a chemisorption process. Different kinetic models were also studied for the removal process and showed that the pseudo-second-order model was more fitted, which indicates that the removal was a chemisorption process. Thermodynamic studies were also carried out. The maximum removal of vitamin B6 by the nano-ZnO/CS composite was found to be 75% at optimal conditions. The results were compared to other reported adsorbents. Reusability tests showed that the nano-ZnO/CS composite can be efficiently reused up to seven times for the removal of PDX drugs from aqueous media.

Saline wastewater treatment by bioelectrochemical process (BEC) based on Al-electrocoagulation and halophilic bacteria: optimization using ANN with new approach

ABSTRACTIn the present study, a bioelectrochemical reactor (BEC) was utilized to treat two types of real saline produced water (PW). BEC was designed based on the combination of electrocoagulation (EC) process with halophilic microorganisms, and it was assessed in terms of biodegradation of hydrocarbons. The effects of various operating parameters including the current density, electrical contact time (On/Off), hydraulic retention time (HRT), and total dissolved solids (TDS) at different levels on the chemical oxygen demand (COD) removal efficiency, settleability, and performance of isolated halophilic microorganisms were examined. Additionally, a novel neural network (ANN) approach modelling using adaptive factors was used to predict and optimize the effects and interactions between operating parameters during BEC process by predicting complicated mechanisms and variations associated with microorganisms. In addition, a new algorithm was developed for the sensitivity analysis to achieve the optimum operating conditions and obtain maximum efficiency in COD removal, sludge volume index (SVI), mixed liquor suspended solids (MLSS), and specific electrical energy consumption (SEEC), simultaneously. BEC was found to be significantly more effective at removing most hydrocarbons, particularly pristine and phytane. In addition, the results showed a significant improvement in settling ability of the biological flocs with average SVI of 91.5 mL/g and a size of 178.25 μm using BEC. Based on estimated operating costs and energy consumption, BEC was more cost-effective and efficient than other bioelectrochemical systems.

Effect of Chromium Carbide Addition on the Microstructures and Properties in Dual Carbide Phases Reinforced Ni-Based Composite Coatings by Plasma Cladding

Cr₃C₂-modified NiCr-TiC composite coatings were prepared using the plasma spraying technique for different Cr₃C₂ contents on the microstructure and the properties of the Ni-based TiC cladding layer were investigated. The microstructures of the coatings were characterized using scanning electron microscopy, and the friction and wear performance of the coating was evaluated by the wear tests. The results revealed that the surfaces of the Cr₃C₂-modified NiCr-TiC composite coatings with varying Cr₃C₂ contents were dense and smooth. TiC was uniformly distributed throughout the entire coating, forming a gradient interface between the binder phase of the Ni-based alloy and the hard phase of TiC. At high temperatures, Cr₃C₂ decomposes, with some chromium diffusing and forming complex carbides around TiC, some chromium solubilizes with Fe, Ni, and other elements. An increase in chromium carbide content leads to an upward trend in hardness. The measured hardness of the coatings ranged from 600 to 850 HV3 and tended to increase with increasing Cr₃C₂ content. When the mass fraction of Cr₃C₂ reached 30%, the hardness increased to 850 HV3, and the cracks and defects were observed in the coating, resulting in a wear resistance decline.

Modification Effect of Ca(OH)2 on the Carbonation Resistance of Fly Ash-Metakaolin-Based Geopolymer

Compared with Portland cement, geopolymers have poor carbonization resistance, which will greatly limit the application their application. To improve the carbonization resistance of geopolymers, firstly, the carbonization behavior of the fly ash-metakaolin-based geopolymer was studied through accelerated carbonization tests. Secondly, different amounts of Ca(OH)₂ were introduced into the composite system, and the modification effect of the carbonization resistance of the modified geopolymer was studied. Finally, the modification effect of Ca(OH)₂ on the fly ash-metakaolin-based geopolymers was analyzed, and the modification mechanism was explored. It was found that adding Ca(OH)₂ to the fly ash-metakaolin-based geopolymer could significantly improve its initial compressive strength, but its strength after carbonization remained basically unchanged; meanwhile, the compressive strength of the terpolymer after carbonization clearly decreased after adding Ca(OH)₂. Compared with ordinary Portland cement, the carbonization rate of fly ash-metakaolin-based geopolymer is faster, and the addition of Ca(OH)₂ can inhibit the development of its carbonization depth. With increased carbonization age, the alkalinity of the geopolymer decreased, and the addition of Ca(OH)₂ inhibited the decrease in the alkalinity of the geopolymer. The addition of Ca(OH)₂ improved the microstructure of the geopolymers, the pore structure became denser, and the pore size became smaller size after carbonization. The hydration products of fly ash-metakaolin-based geopolymer are mainly amorphous silicaluminate gel and C-S-H gel, and Ca(OH)₂ forms in the hydration products of terpolymer with the incorporation of Ca(OH)₂, which is conducive to improving the carbonization resistance. In summary, Ca(OH)₂ can play a good role in modifying the carbonization resistance of fly ash-metakaolin-based geopolymers.