Modeling tooth enamel in FEA comparisons of skulls: Comparing common simplifications with biologically realistic models

Cranial functional specialisation for strength precedes morphological evolution in Oviraptorosauria

Oviraptorosaurians were a theropod dinosaur group that reached high diversity in the Late Cretaceous. Within oviraptorosaurians, the later diverging oviraptorids evolved distinctive crania which were extensively pneumatised, short and tall, and had a robust toothless beak, interpreted as providing a powerful bite for their herbivorous to omnivorous diet. The present study explores the ability of oviraptorid crania to resist large mechanical stresses compared with other theropods and where this adaptation originated within oviraptorosaurians. Digital 3D cranial models were constructed for the earliest diverging oviraptorosaurian, Incisivosaurus gauthieri, and three oviraptorids, Citipati osmolskae, Conchoraptor gracilis, and Khaan mckennai. Finite element analyses indicate oviraptorosaurian crania were stronger than those of other herbivorous theropods (Erlikosaurus and Ornithomimus) and were more comparable to the large, carnivorous Allosaurus. The cranial biomechanics of Incisivosaurus align with oviraptorids, indicating an early establishment of distinctive strengthened cranial biomechanics in Oviraptorosauria, even before the highly modified oviraptorid cranial morphology. Bite modelling, using estimated muscle forces, suggests oviraptorid crania may have functioned closer to structural safety limits. Low mechanical stresses around the beaks of oviraptorids suggest a convergently evolved, functionally distinct rhamphotheca, serving as a cropping/feeding tool rather than for stress reduction, when compared with other herbivorous theropods.

Assessing the adductor musculature and jaw mechanics of Proterochampsa nodosa (Archosauriformes: Proterochampsidae) through finite element analysis

Proterochampsids are a group of South American nonarchosaurian archosauromorphs whose general morphology has been historically likened to that of the extant Crocodylia, which purportedly exhibited similar habits by convergence. Taxa from the genus Proterochampsa, for example, show platyrostral skulls with dorsally faced orbits and external nares and elongated snouts that might indicate a feeding habit similar to that of crocodilians. Nonetheless, some aspects of their craniomandibular anatomy are distinct. Proterochampsa has comparatively larger skull temporal fenestrae, and a unique morphology of the mandibular adductor chamber, with a remarkably large surangular shelf and a fainter retroarticular region in the mandible. In light of this, we conducted biomechanical tests on a 3-dimensional model of Proterochampsa nodosa including the first Finite Element Analysis for proterochampsians and compared it with models of the extant crocodylians Tomistoma schlegelii and Alligator mississippiensis. Our analyses suggested that, despite the differences in adductor chamber, Proterochampsa was able to perform bite forces comparable to those modeled for Alligator and significantly higher than Tomistoma. However, the morphology of the surangular shelf and the adductor chamber of Proterochampsa renders it more prone to accumulate stresses resulting from muscle contraction, when compared with both analogs. The elongated lower jaw of Proterochampsa, like that of Tomistoma, is more susceptible to bending, when compared with Alligator. As a result, we suggest that Proterochampsa might employ anteriorly directed bites only when handling small and soft-bodied prey. In addition, Proterochampsa exemplifies the diversity of arrangements that the adductor musculature adopted in different diverging archosauromorph groups.

The marine conservation deposits of Monte San Giorgio (Switzerland, Italy): the prototype of Triassic black shale Lagerstätten

Marine conservation deposits ('Konservat-Lagerstätten') are characterized by their mode of fossil preservation, faunal composition and sedimentary facies. Here, we review these characteristics with respect to the famous conservation deposit of the Besano Formation (formerly Grenzbitumenzone; including the Anisian-Ladinian boundary), and the successively younger fossil-bearing units Cava inferiore, Cava superiore, Cassina beds and the Kalkschieferzone of Monte San Giorgio (Switzerland and Italy). We compare these units to a selection of important black shale-type Lagerstätten of the global Phanerozoic plus the Ediacaran in order to detect commonalities in their facies, genesis, and fossil content using principal component and hierarchical cluster analyses. Further, we put the Monte San Giorgio type Fossillagerstätten into the context of other comparable Triassic deposits worldwide based on their fossil content. The results of the principal component and cluster analyses allow a subdivision of the 45 analysed Lagerstätten into four groups, for which we suggest the use of the corresponding pioneering localities: Burgess type for the early Palaeozoic black shales, Monte San Giorgio type for the Triassic black shales, Holzmaden type for the pyrite-rich black shales and Solnhofen type for platy limestones.

Reconstructing the dietary habits and trophic positions of the Longipterygidae (Aves: Enantiornithes) using neontological and comparative morphological methods

The Longipterygidae are a unique clade among the enantiornithines in that they exhibit elongate rostra (≥60% total skull length) with dentition restricted to the distal tip of the rostrum, and pedal morphologies suited for an arboreal lifestyle (as in other enantiornithines). This suite of features has made interpretations of this group’s diet and ecology difficult to determine due to the lack of analogous taxa that exhibit similar morphologies together. Many extant bird groups exhibit rostral elongation, which is associated with several disparate ecologies and diets (e.g., aerial insectivory, piscivory, terrestrial carnivory). Thus, the presence of rostral elongation in the Longipterygidae only somewhat refines trophic predictions of this clade. Anatomical morphologies do not function singularly but as part of a whole and thus, any dietary or ecological hypothesis regarding this clade must also consider other features such as their unique dentition. The only extant group of dentulous volant tetrapods are the chiropterans, in which tooth morphology and enamel thickness vary depending upon food preference. Drawing inferences from both avian bill proportions and variations in the dental morphology of extinct and extant taxa, we provide quantitative data to support the hypothesis that the Longipterygidae were animalivorous, with greater support for insectivory.

Sagittal crest morphology decoupled from relative bite performance in Pleistocene tapirs (Perissodactyla: Tapiridae)

Bite force is often associated with specific morphological features, such as sagittal crests. The presence of a pronounced sagittal crest in some tapirs (Perissodactyla: Tapiridae) was recently shown to be negatively correlated with hard-object feeding, in contrast with similar cranial structures in carnivorans. The aim of this study was to investigate bite forces and sagittal crest heights across a wide range of modern and extinct tapirs and apply a comparative investigation to establish whether these features are correlated across a broad phylogenetic scope. We examined a sample of 71 specimens representing 15 tapir species (5 extant, 10 extinct) using the dry-skull method, linear measurements of cranial features, phylogenetic reconstruction, and comparative analyses. Tapirs were found to exhibit variation in bite force and sagittal crest height across their phylogeny and between different biogeographical realms, with high-crested morphologies occurring mostly in Neotropical species. The highest bite forces within tapirs appear to be driven by estimates for the masseter-pterygoid muscle complex, rather than predicted forces for the temporalis muscle. Our results demonstrate that relative sagittal crest height is poorly correlated with relative cranial bite force, suggesting high force application is not a driver for pronounced sagittal crests in this sample. The divergent biomechanical capabilities of different contemporaneous tapirids may have allowed multiple species to occupy overlapping territories and partition resources to avoid excess competition. Bite forces in tapirs peak in Pleistocene species, independent of body size, suggesting possible dietary shifts as a potential result of climatic changes during this epoch.

Dental form and function in the early feeding diversification of dinosaurs

Dinosaurs evolved a remarkable diversity of dietary adaptations throughout the Mesozoic, but the origins of different feeding modes are uncertain, especially the multiple origins of herbivory. Feeding habits of early dinosaurs have mostly been inferred from qualitative comparisons of dental morphology with extant analogs. Here, we use biomechanical and morphometric methods to investigate the dental morphofunctional diversity of early dinosaurs in comparison with extant squamates and crocodylians and predict their diets using machine learning classification models. Early saurischians/theropods are consistently classified as carnivores. Sauropodomorphs underwent a dietary shift from faunivory to herbivory, experimenting with diverse diets during the Triassic and Early Jurassic, and early ornithischians were likely omnivores. Obligate herbivory was a late evolutionary innovation in both clades. Carnivory is the most plausible ancestral diet of dinosaurs, but omnivory is equally likely under certain phylogenetic scenarios. This early dietary diversity was fundamental in the rise of dinosaurs to ecological dominance.

Taking a stab at modelling canine tooth biomechanics in mammalian carnivores with beam theory and finite-element analysis

Canine teeth are vital to carnivore feeding ecology, facilitating behaviours related to prey capture and consumption. Forms vary with specific feeding ecologies; however, the biomechanics that drive these relationships have not been comprehensively investigated. Using a combination of beam theory analysis (BTA) and finite-element analysis (FEA) we assessed how aspects of canine shape impact tooth stress, relating this to feeding ecology. The degree of tooth lateral compression influenced tolerance of multidirectional loads, whereby canines with more circular cross-sections experienced similar maximum stresses under pulling and shaking loads, while more ellipsoid canines experienced higher stresses under shaking loads. Robusticity impacted a tooth's ability to tolerate stress and appears to be related to prey materials. Robust canines experience lower stresses and are found in carnivores regularly encountering hard foods. Slender canines experience higher stresses and are associated with carnivores biting into muscle and flesh. Curvature did not correlate with tooth stress; however, it did impact bending during biting. Our simulations help identify scenarios where canine forms are likely to break and pinpoint areas where this breakage may occur. These patterns demonstrate how canine shape relates to tolerating the stresses experienced when killing and feeding, revealing some of the form-function relationships that underpin mammalian carnivore ecologies.

The Finite Element Analysis Research on Microneedle Design Strategy and Transdermal Drug Delivery System

Microneedles (MNs) as a novel transdermal drug delivery system have shown great potential for therapeutic and disease diagnosis applications by continually providing minimally invasive, portable, cost-effective, high bioavailability, and easy-to-use tools compared to traditional parenteral administrations. However, microneedle transdermal drug delivery is still in its infancy. Many research studies need further in-depth exploration, such as safety, structural characteristics, and drug loading performance evaluation. Finite element analysis (FEA) uses mathematical approximations to simulate real physical systems (geometry and load conditions). It can simplify complex engineering problems to guide the precise preparation and potential industrialization of microneedles, which has attracted extensive attention. This article introduces FEA research for microneedle transdermal drug delivery systems, focusing on microneedle design strategy, skin mechanics models, skin permeability, and the FEA research on drug delivery by MNs.

A toolbox for the retrodeformation and muscle reconstruction of fossil specimens in Blender

Accurate muscle reconstructions can offer new information on the anatomy of fossil organisms and are also important for biomechanical analysis (multibody dynamics and finite-element analysis (FEA)). For the sake of simplicity, muscles are often modelled as point-to-point strands or frustra (cut-off cones) in biomechanical models. However, there are cases in which it is useful to model the muscle morphology in three dimensions, to better examine the effects of muscle shape and size. This is especially important for fossil analyses, where muscle force is estimated from the reconstructed muscle morphology (rather than based on data collected in vivo). The two main aims of this paper are as follows. First, we created a new interactive tool in the free open access software Blender to enable interactive three-dimensional modelling of muscles. This approach can be applied to both palaeontological and human biomechanics research to generate muscle force magnitudes and lines of action for FEA. Second, we provide a guide on how to use existing Blender tools to reconstruct distorted or incomplete specimens. This guide is aimed at palaeontologists but can also be used by anatomists working with damaged specimens or to test functional implication of hypothetical morphologies.

A toolbox for the retrodeformation and muscle reconstruction of fossil specimens in Blender

Accurate muscle reconstructions can offer new information on the anatomy of fossil organisms and are also important for biomechanical analysis (multibody dynamics and finite-element analysis (FEA)). For the sake of simplicity, muscles are often modelled as point-to-point strands or frustra (cut-off cones) in biomechanical models. However, there are cases in which it is useful to model the muscle morphology in three dimensions, to better examine the effects of muscle shape and size. This is especially important for fossil analyses, where muscle force is estimated from the reconstructed muscle morphology (rather than based on data collected in vivo). The two main aims of this paper are as follows. First, we created a new interactive tool in the free open access software Blender to enable interactive three-dimensional modelling of muscles. This approach can be applied to both palaeontological and human biomechanics research to generate muscle force magnitudes and lines of action for FEA. Second, we provide a guide on how to use existing Blender tools to reconstruct distorted or incomplete specimens. This guide is aimed at palaeontologists but can also be used by anatomists working with damaged specimens or to test functional implication of hypothetical morphologies.

A toolbox for the retrodeformation and muscle reconstruction of fossil specimens in Blender

Accurate muscle reconstructions can offer new information on the anatomy of fossil organisms and are also important for biomechanical analysis (multibody dynamics and finite-element analysis (FEA)). For the sake of simplicity, muscles are often modelled as point-to-point strands or frustra (cut-off cones) in biomechanical models. However, there are cases in which it is useful to model the muscle morphology in three dimensions, to better examine the effects of muscle shape and size. This is especially important for fossil analyses, where muscle force is estimated from the reconstructed muscle morphology (rather than based on data collected in vivo). The two main aims of this paper are as follows. First, we created a new interactive tool in the free open access software Blender to enable interactive three-dimensional modelling of muscles. This approach can be applied to both palaeontological and human biomechanics research to generate muscle force magnitudes and lines of action for FEA. Second, we provide a guide on how to use existing Blender tools to reconstruct distorted or incomplete specimens. This guide is aimed at palaeontologists but can also be used by anatomists working with damaged specimens or to test functional implication of hypothetical morphologies.

The biomechanical significance of the elongated rodent incisor root in the mandible during incision

Rodents are characterised by a distinctive masticatory apparatus which includes a single pair of enlarged and continually growing incisors. This morphology, termed diprotodonty, has also independently evolved in a number of other mammals, including the aye-aye. This study examined the functional significance of the internal "root" of the elongated rodent-like incisor. The mandibles of four rodents and an aye-aye were modelled to exhibit incrementally shorter incisor roots. Finite element analysis was used to predict stress and strain patterns across the jaw to determine whether the length of the incisor root contributes to the resistance of mechanical forces encountered in the mandible during incision. It was found that von Mises stresses increase in the region of the mandible local to where the incisor is removed, but that the stress distribution across the wider mandible is only minimally affected. Thus, the long internal incisor appears to play a small role in resisting bending forces close to the incisor alveolus, and may act with the arch-like mandibular shape to strengthen the mandible in this region. However, the impact across the whole mandible is relatively limited, suggesting the highly elongate incisor in diprotodont mammals may be principally driven by other factors such as rapid incisor wear.