Insights on production mechanism and industrial applications of renewable propylene glycol

Investigation of microplastics and potentially toxic elements (PTEs) in sediments of two rivers in Southwestern Nigeria

Microplastics (MPs) are emerging and ubiquitous contaminants, known to accumulate in river sediments. In many developing nations, the absence of policies for managing plastic waste puts the inland river ecosystems at risk of excessive abundance of plastics and MPs. However, only limited studies have reported MPs in river environments in these countries. The current study therefore examined the abundance and nature of MPs and potentially toxic elements (PTEs) in the sediments of the Odo-Ona and Ogun Rivers in Southwest Nigeria. MPs were extracted from the sediments using the density separation method and categorized according to their size, colour and shapes. The range of MP abundances found in the Ogun River sediments was 66.6 ± 12.2 to 311 ± 20.8 particles/kg, while that of the Odo-Ona River ranged from 133 ± 50 to 433 ± 100 particles/kg. The MPs polymer analyses revealed the presence of polyethylene (PE), polypropylene (PP) and polyamide (PA) particles in the sediments. PE was most abundant in the two rivers, constituting 72.8% and 59.7% of MPs (with 0.5 - 5 mm size), recovered from the Odo-Ona and Ogun Rivers, respectively. High concentrations of Cr and Pb with ranges of 10.3 - 48.3 and 10.1 - 211 mg/kg, respectively, were detected in the sediments and were associated with anthropogenic effects. This study reveals the impact of indiscriminate waste dumping on the water bodies, and calls for strict enforcement of environmental laws in the country.

Modifications of Furan-Based Polyesters with the Use of Rigid Diols

The replacement of polymers derived from petrochemical resources has been a prominent area of focus in recent decades. Polymers used in engineering materials must exhibit mechanical strength and stiffness while maintaining performance through a broad temperature range. Most of the polyesters used as engineering materials are based on terephthalic acid (TPA) and its derivatives, which provide necessary rigidity to molecular chains due to an aromatic ring. Bio-based alternatives for TPA-based polyesters that are gaining popularity are the polyesters derived from 2,5-furandicarboxylic acid (FDCA). To broaden applicational possibilities, one effective way to achieve specific properties in targeted applications is to adjust the composition and structure of polymers using advanced polymer chemistry techniques. The incorporation of rigid diols such as isosorbide, 1,4-cyclohexanedimethanol (CHDM), and 2,2,4,4-tetramethyl-1,3-cyclobutanediol (CBDO) should result in a greater stiffness of the molecular chains. This review extensively explores the effect of incorporating rigid diols on material properties through a review of research articles as well as patents. Moreover, this review mainly focuses on the polyesters and copolyesters synthesized via two-step melt polycondensation and its alterations due to the industrial importance of this method. Innovative synthesis strategies and the resulting material properties are presented.

Propylene glycol toxicity in an adolescent secondary to chronic cornstarch ingestion

Propylene glycol (PG) is a diol (a double alcohol) that is commonly used as a food additive to preserve shelf life and enhance flavors, texture, and appearance. Although PG makes up only a small percentage of cornstarch, ingestion of large doses can cause lactic acidosis leading to hyperosmolarity, high anion gap metabolic acidosis (HAGMA), and a sepsis-like syndrome. A 17-year-old female presented to our emergency department (ED) with chronic chest pain, dyspnea, nausea, and vomiting. Laboratory testing showed an elevated anion gap of 18 mEq/L with no osmolar gap. Toxicology screening was negative. Twelve hours after ED arrival, she admitted to consuming one box of cornstarch daily for the past 6 months. She was admitted to the intensive care unit (ICU) with multisystem organ failure due to propylene glycol toxicity. After empiric treatment with fomepizole and continuous renal replacement therapy, her clinical status gradually improved. This case highlights the importance of obtaining a thorough dietary history in patients with suspected toxicities, especially when laboratory values demonstrate an unexplained HAGMA and/or lactic acidosis. Prompt recognition and therapeutic intervention with fomepizole, a potent inhibitor of alcohol dehydrogenase, is essential in reducing life-threatening sequelae following toxic alcohol ingestions.

Research and application of polypropylene: a review

Polypropylene (PP) is a versatile polymer with numerous applications that has undergone substantial changes in recent years, focusing on the demand for next-generation polymers. This article provides a comprehensive review of recent research in PP and its advanced functional applications. The chronological development and fundamentals of PP are mentioned. Notably, the incorporation of nanomaterial like graphene, MXene, nano-clay, borophane, silver nanoparticles, etc., with PP for advanced applications has been tabulated with their key features and challenges. The article also conducts a detailed analysis of advancements and research gaps within three key forms of PP: fiber, membrane, and matrix. The versatile applications of PP across sectors like biomedical, automotive, aerospace, and air/water filtration are highlighted. However, challenges such as limited UV resistance, bonding issues, and flammability are noted. The study emphasizes the promising potential of PP while addressing unresolved concerns, with the goal of guiding future research and promoting innovation in polymer applications.

Designing biodegradable alternatives to commodity polymers

The development and widespread adoption of commodity polymers changed societal landscapes on a global scale. Without the everyday materials used in packaging, textiles, construction and medicine, our lives would be unrecognisable. Through decades of use, however, the environmental impact of waste plastics has become grimly apparent, leading to sustained pressure from environmentalists, consumers and scientists to deliver replacement materials. The need to reduce the environmental impact of commodity polymers is beyond question, yet the reality of replacing these ubiquitous materials with sustainable alternatives is complex. In this tutorial review, we will explore the concepts of sustainable design and biodegradability, as applied to the design of synthetic polymers intended for use at scale. We will provide an overview of the potential biodegradation pathways available to polymers in different environments, and highlight the importance of considering these pathways when designing new materials. We will identify gaps in our collective understanding of the production, use and fate of biodegradable polymers: from identifying appropriate feedstock materials, to considering changes needed to production and recycling practices, and to improving our understanding of the environmental fate of the materials we produce. We will discuss the current standard methods for the determination of biodegradability, where lengthy experimental timescales often frustrate the development of new materials, and highlight the need to develop better tools and models to assess the degradation rate of polymers in different environments.

Production of Sorbitol via Hydrogenation of Glucose over Ruthenium Coordinated with Amino Styrene-co-maleic Anhydride Polymer Encapsulated on Activated Carbon (Ru/ASMA@AC) Catalyst

Sorbitol, a product primarily derived from glucose hydrogenation, has extensive applications in the pharmaceutical, chemical and other industries. Amino styrene-co-maleic anhydride polymer encapsulated on activated carbon (Ru/ASMA@AC) catalysts were developed for efficient glucose hydrogenation and were prepared and confined Ru by coordination with styrene-co-maleic anhydride polymer (ASMA). Through single-factor experiments, optimal conditions were determined to be 2.5 wt.% ruthenium loading and a catalyst usage of 1.5 g, 20% glucose solution at 130 °C, reaction pressure of 4.0 MPa, and a stirring speed of 600 rpm for 3 h. These conditions achieved a high glucose conversion rate of 99.68% and a sorbitol selectivity of 93.04%. Reaction kinetics testing proved that the hydrogenation of glucose catalyzed by Ru/ASMA@AC was a first-order reaction, with a reaction activation energy of 73.04 kJ/mol. Furthermore, the catalytic performance of the Ru/ASMA@AC and Ru/AC catalysts for glucose hydrogenation were compared and characterized by various detection methods. The Ru/ASMA@AC catalyst exhibited excellent stability after five cycles, whereas the traditional Ru/AC catalyst suffered from a 10% decrease in sorbitol yield after three cycles. These results suggest that the Ru/ASMA@AC catalyst is a more promising candidate for high-concentration glucose hydrogenation due to its high catalytic performance and superior stability.

Growth, Characterization, and Application of Vertically Aligned Carbon Nanotubes Using the RF-Magnetron Sputtering Method

The aim of this work is to synthesize and characterize a nanostructured material with improved parameters suitable as a chemiresistive gas sensor sensitive to propylene glycol vapor (PGV). Thus, we demonstrate a simple and cost-effective technology to grow vertically aligned carbon nanotubes (CNTs) and fabricate a PGV sensor based on Fe2O3:ZnO/CNT material using the radio frequency magnetron sputtering method. The presence of vertically aligned carbon nanotubes on the Si(100) substrate was confirmed by scanning electron microscopy and Fourier transform infrared (FTIR), Raman, and energy-dispersive X-ray spectroscopies. The uniform distribution of elements in both CNTs and Fe2O3:ZnO materials was revealed by e-mapped images. The hexagonal shape of the ZnO material in the Fe2O3:ZnO structure and the interplanar spacing in the crystals were clearly visible by transmission electron microscopy images. The gas-sensing behavior of the Fe2O3:ZnO/CNT sensor toward PGV was investigated in the temperature range of 25-300 °C with and without ultraviolet (UV) irradiation. The sensor showed clear and repeatable response/recovery characteristics in the PGV range of 1.5-140 ppm, sufficient linearity of response/concentration dependence, and high selectivity both at 200 and 250 °C without UV radiation. This is a basis for concluding that the synthesized Fe2O3:ZnO/CNT structure is the best candidate for use in PGV sensors, which will allow its further successful application in real-life sensor systems.

UHPLC-Q-Orbitrap-Based Integrated Lipidomics and Proteomics Reveal Propane-1,2-diol Exposure Accelerating Degradation of Lipids via the Allosteric Effect and Reducing the Nutritional Value of Milk

The scandal of detecting the flavoring solvent propane-1,2-diol (PD) in milk has brought a crisis to the trust of consumers in the dairy industry, while its deposition and transformation are still indistinct. Pseudo-targeted lipidomics revealed that PD accelerated the degradation of glycerolipid (33,638.3 ± 28.9 to 104,54.2 ± 28.4 mg kg^-1), phosphoglyceride (467.4 ± 8.2 to 56.6 ± 4.2 mg kg^-1), and sphingolipids (11.4 ± 0.3 to 0.7 ± 0.2 mg kg^-1), which extremely decreased the milk quality. Recoveries and relative standard deviations (RSDs) of the established method were 85.0-109.9 and 0.1-14.9%, respectively, indicating that the approach was credible. Protein-lipid interactions demonstrated that 10 proteins originating from fat globules were upregulated significantly and the activities of 7 enzymes related to lipid degradation were improved. Diacylglycerol cholinephosphotransferase was the only enzyme with decreased activity, and the molecular docking results indicated that PD adjusted its activity through regulating the conformation of the active center and weakening the hydrogen bond force between the enzyme and substrate. This study firstly revealed the mechanism of deposition and transformation of PD in milk, which contributed to the knowledge on the milk quality control and provided key indicators to evaluate the adverse risks of PD in dairy products.

Stochastic economic evaluation of different production pathways for renewable propylene glycol production via catalytic hydrogenolysis of glycerol

The impact of the hydrogen production method on the economic feasibility and environmental friendliness of propylene glycol production from glycerol hydrogenolysis is explored.