Role of viral bioaerosols in nosocomial infections and measures for prevention and control

A, Brunner-Mendoza C, Guerrero-Guerra C. C, Sanchez-Flores A, Salinas-Peralta I, López Jacome LE, Colín Castro C. CA, Martínez Zavaleta MG. Assessment of airborne bacteria from a public health institution in Mexico City

In this work, the composition of the bacterial community in the air of a hospital in Mexico City was evaluated using metabarcoding and proteomics approaches, along with the assessment of environmental factors such as temperature, humidity, and suspended particles. Two types of aerobiological samplers were used: Andersen One-Stage Viable Particle Sampler (AVPS) and Coriolis μ sampler (CμS-Sampler). Sampling was performed in four areas of the hospital: Floor 1 (F1), Floor 2 (F2), and Emergency Unit (EU), as well as outdoors (OH). The use of both samplers showed variations in diversity and composition. Bacterial abundance was 89.55% with the CμS-Sampler and 74.00% with the AVPS. The predominant phyla with the AVPS were Firmicutes, Proteobacteria and Actinobacteria, while with the CμS-Sampler, the main phyla were Proteobacteria, followed by Actinobacteria and Firmicutes. The highest diversity and richness of bacteria was recorded in F1 and F2, with 32 species identified, with a greater number within the hospital. Potentially pathogenic bacteria such as Bacillus spp., B. cereus, B. pumilus, Clostridium spp., Enterococcus gallinarum, Micrococcus luteus and Staphylococcus spp. were detected. Furthermore, a high concentration of particles between 2.5 μm and 10 μm, and Total Particulate Matter (TPM) was observed, with values of TPM, 303 μg/m3 in F1, 195 μg/m3 in F2, 235 μg/m3 in EU and 188 μg/m3 in OH. Temperatures averaged between 26 and 27°C, and relative humidity ranged between 39.8 and 43.5%. These environmental conditions and particulate matter can promote bacterial growth and their dispersion in the air, constituting a continuous risk of exposure to pathogens, mainly in indoor areas of the hospital. This study provides a framework for air monitoring, where the results of different samplers complement the detection of potential pathogens.

Antimicrobial activity of silver-copper coating against aerosols containing surrogate respiratory viruses and bacteria

The transmission of bacteria and respiratory viruses through expelled saliva microdroplets and aerosols is a significant concern for healthcare workers, further highlighted during the SARS-CoV-2 pandemic. To address this issue, the development of nanomaterials with antimicrobial properties for use as nanolayers in respiratory protection equipment, such as facemasks or respirators, has emerged as a potential solution. In this study, a silver and copper nanolayer called SakCu® was deposited on one side of a spun-bond polypropylene fabric using the magnetron sputtering technique. The antibacterial and antiviral activity of the AgCu nanolayer was evaluated against droplets falling on the material and aerosols passing through it. The effectiveness of the nanolayer was assessed by measuring viral loads of the enveloped virus SARS-CoV-2 and viability assays using respiratory surrogate viruses, including PaMx54, PaMx60, PaMx61 (ssRNA, Leviviridae), and PhiX174 (ssDNA, Microviridae) as representatives of non-enveloped viruses. Colony forming unit (CFU) determination was employed to evaluate the survival of aerobic and anaerobic bacteria. The results demonstrated a nearly exponential reduction in SARS-CoV-2 viral load, achieving complete viral load reduction after 24 hours of contact incubation with the AgCu nanolayer. Viability assays with the surrogate viruses showed a significant reduction in viral replication between 2-4 hours after contact. The simulated viral filtration system demonstrated inhibition of viral replication ranging from 39% to 64%. The viability assays with PhiX174 exhibited a 2-log reduction in viral replication after 24 hours of contact and a 16.31% inhibition in viral filtration assays. Bacterial growth inhibition varied depending on the species, with reductions ranging from 70% to 92% for aerobic bacteria and over 90% for anaerobic strains. In conclusion, the AgCu nanolayer displayed high bactericidal and antiviral activity in contact and aerosol conditions. Therefore, it holds the potential for incorporation into personal protective equipment to effectively reduce and prevent the transmission of aerosol-borne pathogenic bacteria and respiratory viruses.

The impact of heating, ventilation, and air conditioning design features on the transmission of viruses, including the 2019 novel coronavirus: A systematic review of filtration

Historically, viruses have demonstrated airborne transmission. Emerging evidence suggests the novel coronavirus (SARS-CoV-2) that causes COVID-19 also spreads by airborne transmission. This is more likely in indoor environments, particularly with poor ventilation. In the context of airborne transmission, a vital mitigation strategy for the built environment is heating, ventilation, and air conditioning (HVAC) systems. HVAC features could modify virus transmission potential. A systematic review was conducted to identify and synthesize research examining the effectiveness of filters within HVAC systems in reducing virus transmission. A comprehensive search of OVID MEDLINE, Compendex, and Web of Science Core was conducted to January 2021. Two authors were involved in study selection, data extraction, and risk of bias assessments. Study characteristics and results were displayed in evidence tables and findings were synthesized narratively. Twenty-three relevant studies showed that: filtration was associated with decreased transmission; filters removed viruses from the air; increasing filter efficiency (efficiency of particle removal) was associated with decreased transmission, decreased infection risk, and increased viral filtration efficiency (efficiency of virus removal); increasing filter efficiency above MERV 13 was associated with limited benefit in further reduction of virus concentration and infection risk; and filters with the same efficiency rating from different companies showed variable performance. Adapting HVAC systems to mitigate virus transmission requires a multi-factorial approach and filtration is one factor offering demonstrated potential for decreased transmission. For filtration to be effective, proper installation is required. Of note, similarly rated filters from different companies may offer different virus reduction results. While increasing filtration efficiency (i.e., increasing MERV rating or moving from MERV to HEPA) is associated with virus mitigation, there are diminishing returns for filters rated MERV 13 or higher. Although costs increase with filtration efficiency, they are lower than the cost of ventilation options with the equivalent reduction in transmission. Systematic review registration: PROSPERO 2020 CRD42020193968.

The impact of heating, ventilation and air conditioning (HVAC) design features on the transmission of viruses, including the 2019 novel coronavirus (COVID-19): A systematic review of humidity

The aerosol route has been a pathway for transmission of many viruses. Similarly, recent evidence has determined aerosol transmission for SARS-CoV-2 to be significant. Consequently, public health officials and professionals have sought data regarding the role of Heating, Ventilation, and Air Conditioning (HVAC) features as a means to mitigate transmission of viruses, particularly coronaviruses. Using international standards, a systematic review was conducted to comprehensively identify and synthesize research examining the effect of humidity on transmission of coronaviruses and influenza. The results from 24 relevant studies showed that: increasing from mid (40-60%) to high (>60%) relative humidity (RH) for SARS-CoV-2 was associated with decreased virus survival; although SARS-CoV-2 results appear consistent, coronaviruses do not all behave the same; increasing from low (<40%) to mid RH for influenza was associated with decreased persistence, infectivity, viability, and survival, however effects of increased humidity from mid to high for influenza were not consistent; and medium, temperature, and exposure time were associated with inconsistency in results for both coronaviruses and influenza. Adapting humidity to mitigate virus transmission is complex. When controlling humidity as an HVAC feature, practitioners should take into account virus type and temperature. Future research should also consider the impact of exposure time, temperature, and medium when designing experiments, while also working towards more standardized testing procedures. Clinical trial registration: PROSPERO 2020 CRD42020193968.

Preventing spread of aerosolized infectious particles during medical procedures: A lab-based analysis of an inexpensive plastic enclosure

Severe viral respiratory diseases, such as SARS-CoV-2, are transmitted through aerosol particles produced by coughing, talking, and breathing. Medical procedures including tracheal intubation, extubation, dental work, and any procedure involving close contact with a patient's airways can increase exposure to infectious aerosol particles. This presents a significant risk for viral exposure of nearby healthcare workers during and following patient care. Previous studies have examined the effectiveness of plastic enclosures for trapping aerosol particles and protecting health-care workers. However, many of these enclosures are expensive or are burdensome for healthcare workers to work with. In this study, a low-cost plastic enclosure was designed to reduce aerosol spread and viral transmission during medical procedures, while also alleviating issues found in the design and use of other medical enclosures to contain aerosols. This enclosure is fabricated from clear polycarbonate for maximum visibility. A large single-side cutout provides health care providers with ease of access to the patient with a separate cutout for equipment access. A survey of medical providers in a local hospital network demonstrated their approval of the enclosure's ease of use and design. The enclosure with appropriate plastic covers reduced total escaped particle number concentrations (diameter > 0.01 μm) by over 93% at 8 cm away from all openings. Concentration decay experiments indicated that the enclosure without active suction should be left on the patient for 15-20 minutes following a tracheal manipulation to allow sufficient time for >90% of aerosol particles to settle upon interior surfaces. This decreases to 5 minutes when 30 LPM suction is applied. This enclosure is an inexpensive, easily implemented additional layer of protection that can be used to help contain infectious or otherwise potentially hazardous aerosol particles while providing access into the enclosure.

Detection of SARS-CoV-2 in the air in Indian hospitals and houses of COVID-19 patients

To understand the transmission characteristics of severe acute respiratory syndrome corona virus-2 (SARS-CoV-2) through air, samples from different locations occupied by coronavirus disease (COVID-19) patients were analyzed. Three sampling strategies were used to understand the presence of virus in the air in different environmental conditions. In the first strategy, which involved hospital settings, air samples were collected from several areas of hospitals like COVID-intensive-care units (ICUs), nurse-stations, COVID-wards, corridors, non-COVID-wards, personal protective equipment (PPE) doffing areas, COVID rooms, out-patient (OP) corridors, mortuary, COVID casualty areas, non-COVID ICUs and doctors' rooms. Out of the 80 air samples collected from 6 hospitals from two Indian cities- Hyderabad and Mohali, 30 samples showed the presence of SARS-CoV-2 nucleic acids. In the second sampling strategy, that involved indoor settings, one or more COVID-19 patients were asked to spend a short duration of time in a closed room. Out of 17 samples, 5 samples, including 4 samples collected after the departure of three symptomatic patients from the room, showed the presence of SARS-CoV-2 nucleic acids. In the third strategy, involving indoor settings, air samples were collected from rooms of houses of home-quarantined COVID-19 patients and it was observed that SARS-CoV-2 RNA could be detected in the air in the rooms occupied by COVID-19 patients but not in the other rooms of the houses. Taken together, we observed that the air around COVID-19 patients frequently showed the presence of SARS-CoV-2 RNA in both hospital and indoor residential settings and the positivity rate was higher when 2 or more COVID-19 patients occupied the room. In hospitals, SARS-CoV-2 RNA could be detected in ICUs as well as in non-ICUs, suggesting that the viral shedding happened irrespective of the severity of the infection. This study provides evidence for the viability of SARS-CoV-2 and its long-range transport through the air. Thus, airborne transmission could be a major mode of transmission for SARS-CoV-2 and appropriate precautions need to be followed to prevent the spread of infection through the air.

Mutations in AR or SRD5A2 Genes: Clinical Findings, Endocrine Pitfalls, and Genetic Features of Children with 46,XY DSD

OBJECTIVE

Androgen insensivity syndrome (AIS) and 5α-reductase deficiency (5α-RD) present with indistinguishable phenotypes among the 46,XY disorders of sexual development (DSD) that usually necessitate molecular analyses for the definitive diagnosis in the prepubertal period. The aim was to evaluate the clinical, hormonal and genetic findings of 46,XY DSD patients who were diagnosed as AIS or 5α-RD.

METHODS

Patients diagnosed as AIS or 5α-RD according to clinical and hormonal evaluations were investigated. Sequence variants of steroid 5-α-reductase type 2 were analyzed in cases with testosterone/dihydrotestosterone (T/DHT) ratio of ≥20, whereas the androgen receptor (AR) gene was screened when the ratio was <20. Stepwise analysis of other associated genes were screened in cases with no causative variant found in initial analysis. For statistical comparisons, the group was divided into three main groups and subgroups according to their genetic diagnosis and T/DHT ratios.

RESULTS

A total of 128 DSD patients from 125 non-related families were enrolled. Birth weight SDS and gestational weeks were significantly higher in 5α-RD group than in AIS and undiagnosed groups. Completely female phenotype was higher in all subgroups of both AIS and 5α-RD patients than in the undiagnosed subgroups. In those patients with stimulated T/DHT <20 in the prepubertal period, stimulated T/DHT ratio was significantly lower in AIS than in the undiagnosed group, and higher in 5α-RD. Phenotype associated variants were detected in 24% (n=18 AIS, n=14 5α-RD) of the patients, revealing four novel AR variants (c.94G>T, p.Glu32*, c.330G>C, p.Leu110=; c.2084C>T, p.Pro695Leu, c.2585_2592delAGCTCCTG, p.(Lys862Argfs*16), of these c.330G>C with silent status remained undefined in terms of its causative effects.

CONCLUSION

T/DHT ratio is an important hormonal criterion, but in some cases, T/DHT ratio may lead to diagnostic confusion. Molecular diagnosis is important for the robust diagnosis of 46,XY DSD patients. Four novel AR variants were identified in our study.

The impact of heating, ventilation, and air conditioning design features on the transmission of viruses, including the 2019 novel coronavirus: A systematic review of ultraviolet radiation

Respiratory viruses are capable of transmitting via an aerosol route. Emerging evidence suggests that SARS-CoV-2 which causes COVID-19 can be spread through airborne transmission, particularly in indoor environments with poor ventilation. Heating, ventilation, and air conditioning (HVAC) systems can play a role in mitigating airborne virus transmission. Ultraviolet germicidal irradiation (UVGI), a feature that can be incorporated into HVAC systems, can be used to impede the ability of viruses to replicate and infect a host. We conducted a systematic review of the scientific literature examining the effectiveness of HVAC design features in reducing virus transmission-here we report results for ultraviolet (UV) radiation. We followed international standards for conducting systematic reviews and developed an a priori protocol. We conducted a comprehensive search to January 2021 of published and grey literature using Ovid MEDLINE, Compendex, and Web of Science Core. Two reviewers were involved in study selection, data extraction, and risk of bias assessments. We presented study characteristics and results in evidence tables, and synthesized results across studies narratively. We identified 32 relevant studies published between 1936 and 2020. Research demonstrates that: viruses and bacteriophages are inactivated by UV radiation; increasing UV dose is associated with decreasing survival fraction of viruses and bacteriophages; increasing relative humidity is associated with decreasing susceptibility to UV radiation; UV dose and corresponding survival fraction are affected by airflow pattern, air changes per hour, and UV device location; and UV radiation is associated with decreased transmission in both animal and human studies. While UV radiation has been shown to be effective in inactivating viruses and reducing disease transmission, practical implementation of UVGI in HVAC systems needs to consider airflow patterns, air changes per hour, and UV device location. The majority of the scientific literature is comprised of experimental, laboratory-based studies. Further, a variety of viruses have been examined; however, there are few studies of coronaviruses and none to date of SARS-CoV-2. Future field studies of UVGI systems could address an existing research gap and provide important information on system performance in real-world situations, particularly in the context of the current COVID-19 pandemic. This comprehensive synthesis of the scientific evidence examining the impact of UV radiation on virus transmission can be used to guide implementation of systems to mitigate airborne spread and identify priorities for future research. Trial registration PROSPERO 2020 CRD42020193968.

Methodology minute: Utilizing the RAND/UCLA appropriateness method to develop guidelines for infection prevention

The use of the RAND/UCLA appropriateness method is an innovative way to provide practical, evidence based clinical guidance to infection preventionist (IP) in the absence of clinical trial data. This brief primer aims to introduce the IP to the methodology, including a short case study demonstrating the utilization of the method in the arena of infection prevention and management.

The impact of heating, ventilation, and air conditioning design features on the transmission of viruses, including the 2019 novel coronavirus: A systematic review of ventilation and coronavirus

Aerosol transmission has been a pathway for the spread of many viruses. Similarly, emerging evidence has determined aerosol transmission for Severe Acute Respiratory Syndrome coronavirus 2 (SARS-CoV-2) and the resulting COVID-19 pandemic to be significant. As such, data regarding the effect of Heating, Ventilation, and Air Conditioning (HVAC) features to control and mitigate virus transmission is essential. A systematic review was conducted to identify and comprehensively synthesize research examining the effectiveness of ventilation for mitigating transmission of coronaviruses. A comprehensive search was conducted in Ovid MEDLINE, Compendex, Web of Science Core to January 2021. Study selection, data extraction, and risk of bias assessments were performed by two authors. Evidence tables were developed and results were described narratively. Results from 32 relevant studies showed that: increased ventilation rate was associated with decreased transmission, transmission probability/risk, infection probability/risk, droplet persistence, virus concentration, and increased virus removal and virus particle removal efficiency; increased ventilation rate decreased risk at longer exposure times; some ventilation was better than no ventilation; airflow patterns affected transmission; ventilation feature (e.g., supply/exhaust, fans) placement influenced particle distribution. Few studies provided specific quantitative ventilation parameters suggesting a significant gap in current research. Adapting HVAC ventilation systems to mitigate virus transmission is not a one-solution-fits-all approach. Changing ventilation rate or using mixing ventilation is not always the only way to mitigate and control viruses. Practitioners need to consider occupancy, ventilation feature (supply/exhaust and fans) placement, and exposure time in conjunction with both ventilation rates and airflow patterns. Some recommendations based on quantitative data were made for specific scenarios (e.g., using air change rate of 9 h-1 for a hospital ward). Other recommendations included using or increasing ventilation, introducing fresh air, using maximum supply rates, avoiding poorly ventilated spaces, assessing fan placement and potentially increasing ventilation locations, and employing ventilation testing and air balancing checks. Trial registration: PROSPERO 2020 CRD42020193968.

Airborne particles and microorganisms in a dental clinic: Variability of indoor concentrations, impact of dental procedures, and personal exposure during everyday practice

This study presents for the first time comprehensive measurements of the particle number size distribution (10 nm to 10 μm) together with next-generation sequencing analysis of airborne bacteria inside a dental clinic. A substantial enrichment of the indoor environment with new particles in all size classes was identified by both activities to background and indoor/outdoor (I/O) ratios. Grinding and drilling were the principal dental activities to produce new particles in the air, closely followed by polishing. Illumina MiSeq sequencing of 16S rRNA of bioaerosol collected indoors revealed the presence of 86 bacterial genera, 26 of them previously characterized as potential human pathogens. Bacterial species richness and concentration determined both by qPCR, and culture-dependent analysis were significantly higher in the treatment room. Bacterial load of the treatment room impacted in the nearby waiting room where no dental procedures took place. I/O ratio of bacterial concentration in the treatment room followed the fluctuation of I/O ratio of airborne particles in the biology-relevant size classes of 1-2.5, 2.5-5, and 5-10 μm. Exposure analysis revealed increased inhaled number of particles and microorganisms during dental procedures. These findings provide a detailed insight on airborne particles of both biotic and abiotic origin in a dental clinic.

Respiratory care for the critical patients with 2019 novel coronavirus

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is transmitted through respiratory droplets, aerosols and close contact. Cross infections occur because viruses spread rapidly among humans. Nineteen percent (19%) of the infected patients developed severe pneumonia and acute respiratory distress syndrome (ARDS). Hypoxemia usually occurs and patients may require oxygen therapy or mechanical ventilation (MV) support. In this article, recently published clinical experience and observational studies were reviewed. Corresponding respiratory therapy regarding different stages of infection is proposed. Infection control principles and respiratory strategies including oxygen therapy, non-invasive respiratory support (NIRS), intubation evaluation, equipment preparation, ventilator settings, special maneuvers comprise of the prone position (PP), recruitment maneuver (RM), extracorporeal membrane oxygenation (ECMO), weaning and extubation are summarized. Respiratory equipment and device disinfection recommendations are worked up. We expect this review article could be used as a reference by healthcare workers in patient care while minimizing the risk of environmental contamination.

Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens

An arduous need exists to discover rapid solutions to avoid the accelerated spread of coronavirus especially through the indoor environments like offices, hospitals, and airports. One such measure could be to disinfect the air, especially in indoor environments. The goal of this work is to propose a novel design of a wet scrubber-reactor to deactivate airborne microbes using circular economy principles. Based on Fenton's reaction mechanism, the system proposed here will deactivate airborne microbes (bioaerosols) such as SARS-CoV-2. The proposed design relies on using a highly porous clay-glass open-cell structure as an easily reproducible and cheap material. The principle behind this technique is an in-situ decomposition of hydrogen peroxide into highly reactive oxygen species and free radicals. The high porosity of a tailored ceramic structure provides a high contact area between atomized oxygen, free radicals and supplied polluted air. The design is shown to comply with the needs of achieving sustainable development goals.

Nosocomial Infection Outbreak due to SARS-COV-2 in a Hospital Unit of Particularly Vulnerable Patients

Objectives: To report a COVID-19 outbreak among workers and inpatients at a medical ward for especially vulnerable patients. Methods: Descriptive study of a nosocomial COVID-19 outbreak registered in March-April 2020 at medical ward of onco-hematological patients in an Spanish hospital. Confirmed cases were hospitalized patients, healthcare and non-healthcare workers who tested positive by PCR on a nasopharyngeal swab. Results: Twenty-two COVID-19 cases (12 workers and 10 inpatients) were laboratory-confirmed. Initial cases were a healthcare provider and a visitor who tested positive. The median patients age was 73 years (range 62-88). The main reason of admission was haematological in 8 patients and oncologic in 2. All patients followed an immunosuppressive treatment, 5/10 with high-flow oxygen nebulizations. Five patients presented a moderate/serious evolution, and 5 patients died. The mean workers age was 42.1±10.9. One healthworker required Intensive Care Unit admission, and all of them recovered completely. Conclusions: In the hospital setting, close patients surveillance for SARS-CoV-2 is essential, especially in immunosuppressed patients. Replacing nebulizations or high-flow oxygen therapies, when other equivalent options were available, to reduce dispersion, and controlling ventilation ducts, together with hygiene measures and an active follow-up on inpatients, visitors and workers appear to be important in preventing nosocomial outbreaks.

Drastic Reduction of Bacterial, Fungal and Viral Pathogen Titers by Cuprous Oxide Impregnated Medical Textiles

Hospital patients and personnel are at risk of nosocomial viral infections, as clearly manifested during the COVID-19 pandemic. Transmission of respiratory viral pathogens can occur through contaminated surfaces, including from medical textiles. Copper has potent biocidal properties, and cuprous oxide impregnated medical textiles (CMT) reduce hospital-acquired bacterial infections. In the current study we confirm the antimicrobial properties of CMT and determine their capacity to reduce infectious titres of human coronavirus (HCoV-229E) in an independent laboratory. The antibacterial and antiviral activities of the CMT were determined according to AATCC TM100-2019 and ISO 18184:2019 standards, respectively. The CMT reduced by 4 logs the viable titers of MRSA, Klebsiella pneumoniae, Enterococcus faecalis, and Candida auris after 2 h of incubation. Viable titers of Clostridium difficile were reduced by 2.3, 3, and 4 logs after 2, 6, and 18 h, respectively. Infectious titers of HCoV-229E exposed to CMT for 2 h were reduced by 2.8 and 4 logs (99.85% and 99.99% reductions) as compared to Time-0 control and initial inoculum, respectively. The CMT retain their antibacterial efficacy even after 100 industrial washings. Use of cuprous oxide impregnated textiles in clinical settings may reduce not only hospital acquired infections caused by bacterial and fungal pathogens, but also, and equally important, those caused by coronavirus and other viruses.

Reducing Aerosol-Related Risk of Transmission in the Era of COVID-19: An Interim Guidance Endorsed by the International Society of Aerosols in Medicine

National and international guidelines recommend droplet/airborne transmission and contact precautions for those caring for coronavirus disease 2019 (COVID-19) patients in ambulatory and acute care settings. The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, an acute respiratory infectious agent, is primarily transmitted between people through respiratory droplets and contact routes. A recognized key to transmission of COVID-19, and droplet infections generally, is the dispersion of bioaerosols from the patient. Increased risk of transmission has been associated with aerosol generating procedures that include endotracheal intubation, bronchoscopy, open suctioning, administration of nebulized treatment, manual ventilation before intubation, turning the patient to the prone position, disconnecting the patient from the ventilator, noninvasive positive-pressure ventilation, tracheostomy, and cardiopulmonary resuscitation. The knowledge that COVID-19 subjects can be asymptomatic and still shed virus, producing infectious droplets during breathing, suggests that health care workers (HCWs) should assume every patient is potentially infectious during this pandemic. Taking actions to reduce risk of transmission to HCWs is, therefore, a vital consideration for safe delivery of all medical aerosols. Guidelines for use of personal protective equipment (glove, gowns, masks, shield, and/or powered air purifying respiratory) during high-risk procedures are essential and should be considered for use with lower risk procedures such as administration of uncontaminated medical aerosols. Bioaerosols generated by infected patients are a major source of transmission for SARS CoV-2, and other infectious agents. In contrast, therapeutic aerosols do not add to the risk of disease transmission unless contaminated by patients or HCWs.

The Need for Ocular Protection for Health Care Workers During SARS-CoV-2 Outbreak and a Hypothesis for a Potential Personal Protective Equipment

SARS-CoV-2 is a coronavirus with high infectivity and has caused dramatic pressure on health systems all over the world. Appropriate personal protection for medical staffs is critical. For ocular protection, there is ongoing hot debate and concern for potential ocular transmission of SARS-CoV-2. Ocular manifestations and positive detection of viral RNA in ocular samples were only reported in very small number of patients infected with SARS-CoV-2. However, health care workers need to face patients more closely and have higher risk of aerosol contamination. Thus, appropriate ocular protection for medical workers is still recommended by organizations such as WHO and American Academy of Ophthalmology. Although eye goggles provide excellent protection and are mandatory for medical practitioners with high risk of exposure, they are not ideal for common clinical practice, because they can disturb vision due to extensive formation of water droplets and frequently cause moderate to severe discomfort after longtime wearing, which have been reported to interfere with working status. For the majority of medical workers who don't deal with high risk patients, they are not advised to wear goggles in daily practice. However, they also face the risk of infection due to the presence of asymptomatic carriers. Especially in situations with high risk of ocular exposure, such as close physical examination, eye surgery, dental clinics and surgery, ocular protection may be needed. Griffithsin has been shown to directly bind to spike proteins and has anti-viral activity against a broad spectrum of viruses, including coronavirus. Griffithsin is found to inhibit the entry of SARS-CoV at relatively low concentration and is stable and non-toxic. SARS-CoV-2 and SARS-CoV share the same entry receptors and their spike proteins are similar in conformation. We hypothesize that contact lenses containing nanoparticles loaded with griffithsin may provide sufficient ocular protection for medical staffs without high risk of exposure during the outbreak period of SARS-CoV-2. If proven effective, griffithsin-loaded contact lens can be considered as a supplementary ocular protective equipment for medical workers who can tolerate well. The daily disposable contact lens should be applied as needed and refrain from extended wearing in order to reduce potential side effects.

Communication Chaos from Discrepancies in Personal Protective Equipment and Preoperative Guidelines

OBJECTIVES/HYPOTHESIS

To compare personal protective equipment (PPE) guidelines, specifically respirator use, among international public health agencies, academic hospitals, and otolaryngology-head and neck surgery (OHNS) departments in the United States for the care of coronavirus-19 (COVID-19) patients.

STUDY DESIGN

Cross sectional survey.

METHODS

Review of publicly available public health and academic hospitals guidelines along with review of communication among otolaryngology departments.

RESULTS

Among 114 academic institutions affiliated with OHNS residencies, 20 (17.5%) institutions provided public access to some form of guidance on PPE and 73 (64%) provided information on screening or diagnostic testing. PPE guidelines were uniquely described based on several variables: location of care, COVID-19 status, involvement of aerosol generating or high-risk procedures, and physical distance from the patient. Six hospital guidelines were highlighted. Across these six institutions, there was agreement that N95 respirators were needed for high-risk patients undergoing high-risk procedures. Variations existed among institutions for scenarios with low-risk patients. Definitions of the low-risk patient and high-risk procedures were inconsistent among institutions. Three of the highlighted institutions had OHNS departments recommending higher level of airway protection than the institution.

CONCLUSIONS

OHNS departments typically had more stringent PPE guidance than their institution. Discrepancies in communicating PPE use were frequent and provide inconsistent information on how healthcare workers should protect themselves in the COVID-19 pandemic. Identification of these inconsistencies serves as an opportunity to standardize communication and develop evidence-based guidelines.

LEVEL OF EVIDENCE

V Laryngoscope, 131:E746-E754, 2021.

Arguments pour une possible transmission par voie aérienne du SARS-CoV-2 dans la crise COVID-19

La connaissance des modes de transmission du SARS-CoV-2 est un élément fondamental dans l’élaboration des stratégies de prévention en santé au travail et en santé publique dans le cadre de la gestion de crise du Covid-19. Le SARS-CoV-2 est retrouvé dans les voies aériennes des patients, y compris asymptomatiques. Les données récentes de la littérature suggèrent un risque de transmission du SARS-CoV-2 par voie aérienne qui a probablement été sous-estimé, notamment via des aérosols générés par la toux ou les éternuements, mais aussi plus simplement la parole et la respiration, et donc la composition est majoritairement le fait de particules dont le diamètre est inférieur ou égal à 1 μm. Des données préliminaires montrent la présence d’ARN viral dans l’air et sur des surfaces distantes des patients sources. Cependant, il est important de noter que la détection de matériel génétique viral par RT-PCR ne signifie pas que le virus soit vivant et infectant. En fonction de données sur la quantification du pouvoir infectant des aérosols de petite taille et si l’hypothèse d’une telle transmission était confirmée, les indications de port des protections respiratoires de type FFP2 mériteraient d’être élargies, notamment en milieu de soin.

Fingerprinting ambient air to understand bioaerosol profiles in three different environments in the south east of England

Molecular and chemical fingerprints from 10 contrasting outdoor air environments, including three agricultural farms, three urban parks and four industrial sites were investigated to advance our understanding of bioaerosol distribution and emissions. Both phospholipid fatty acids (PLFA) and microbial volatile organic compounds (MVOC) profiles showed a different distribution in summer compared to winter. Further to this, a strong positive correlation was found between the total concentration of MVOCs and PLFAs (r = 0.670, p = 0.004 in winter and r = 0.767, p = 0.001 in summer) demonstrating that either chemical or molecular fingerprints of outdoor environments can provide good insights into the sources and distribution of bioaerosols. Environment specific variables and most representative MVOCs were identified and linked to microbial species emissions via a MVOC database and PLFAs taxonomical classification. While similar MVOCs and PLFAs were identified across all the environments suggesting common microbial communities, specific MVOCs were identified for each contrasting environment. Specifically, 3,4-dimethylpent-1-yn-3-ol, ethoxyethane and propanal were identified as key MVOCs for the industrial areas (and were correlated to fungi, Staphylococcus aureus (Gram positive bacteria) and Gram negative bacteria, R = 0.863, R = 0.618 and R = 0.676, respectively) while phthalic acid, propene and isobutane were key for urban environments (correlated to Gram negative bacteria, fungi and bacteria, R = 0.874, R = 0.962 and R = 0.969 respectively); and ethanol, 2-methyl-2-propanol, 2-methyl-1-pentene, butane, isoprene and methyl acetate were key for farms (correlated to fungi, Gram positive bacteria and bacteria, R = 0.690 and 0.783, R = 0.706 and R = 0.790, 0.761 and 0.768). The combination of MVOCs and PLFAs markers can assist in rapid microbial fingerprinting of distinct environmental influences on ambient air quality.

Identifying organic compounds in exhaled breath aerosol: Non-invasive sampling from respirator surfaces and disposable hospital masks

Exhaled breath aerosol (EBA) is an important non-invasive biological medium for detecting exogenous environmental contaminants and endogenous metabolites present in the pulmonary tract. Currently, EBA is typically captured as a constituent of the mainstream clinical tool referred to as exhaled breath condensate (EBC). This article describes a simpler, completely non-invasive method for collecting EBA directly from different forms of hard-surface plastic respirator masks and disposable hospital paper breathing masks without first collecting EBC. The new EBA methodology bypasses the complex EBC procedures that require specialized collection gear, dry ice or other coolant, in-field sample processing, and refrigerated transport to the laboratory. Herein, mask samples collected from different types of plastic respirators and paper hospital masks worn by volunteers in the laboratory were analyzed using high resolution-liquid chromatography-mass spectrometry (HR-LC-MS) and immunochemistry. The results of immunochemistry analysis revealed that cytokines were collected above background on both plastic respirator surfaces and paper hospital masks, confirming the presence of human biological constituents. Non-targeted HR-LC-MS analyses demonstrated that larger exogenous molecules such as plasticizers, pesticides, and consumer product chemicals as well as endogenous biochemicals, including cytokines and fatty acids were also detected on mask surfaces. These results suggest that mask sampling is a viable technique for EBA collection to assess potential inhalation exposures and endogenous indicators of health state.

Embracing microbes in exposure science

Although defined more broadly, exposure science has mainly focused on exposures to environmental chemicals and related stressors, such as airborne particulate matter. There is an opportunity for exposure science to contribute more substantially to improving public health by devoting more attention to microorganisms as key stressors and agents in exposure. The discovery that pathogenic microbes cause disease in humans precipitated a revolution in public health science and disease prevention. With a continued global urgency to address spread of pathogenic microbes, contributions of microorganisms to both infectious and noninfectious processes merit more attention from the exposure science community. Today, discoveries of the importance of the human microbiome as a determinant of health and disease are precipitating a second revolution. Emerging knowledge creates a major opportunity to expand the scope of exposure science to incorporate the human microbiome as a target and modulator of exposure. A study committee of the National Academies of Sciences, Engineering, and Medicine has defined a research strategy to address health risks that pertain to the interaction of environmental chemicals with the human microbiome. Some aspects of this strategy pose important challenges and opportunities for the exposure science community.