Role of carbon nano-materials in the analysis of biological materials by laser desorption/ionization-mass spectrometry

A Graphene-Coated Silicon Wafer Plate Improves the Sensitivity and Reproducibility of MALDI-TOF MS Analysis of Proteins

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is widely used to analyze small and large molecules. However, proteins are difficult to analyze with MALDI-TOF MS in clinical applications because of their low ionization efficiency and heterogeneous crystallization with the matrix on the sample spots. Here, we investigate the potential of a customized graphene-coated silicon wafer (G/SiO2) plate for MALDI-TOF MS analysis of a clinically important protein, KPC-2, in comparison with a conventional stainless steel (SUS) plate. Our results demonstrate that the G/SiO2 plate outperforms the SUS plate in terms of sensitivity, reproducibility, and mass accuracy/precision across a wide range of molecular weights, even with highly complex samples. Furthermore, a five-day robustness test confirms the practical applicability of the G/SiO2 plate for the reliable identification of target protein(s) in MALDI-TOF MS analysis. Overall, our findings suggest that the use of the G/SiO2 plate holds great potential for improving the sensitivity and reproducibility of MALDI-TOF MS analysis for the identification of proteins, making it a promising tool for clinical applications.

Exosome Metabolic Patterns on Aptamer-Coupled Polymorphic Carbon for Precise Detection of Early Gastric Cancer

Gastric cancer (GC) presents high mortality worldwide because of delayed diagnosis. Currently, exosome-based liquid biopsy has been applied in diagnosis and monitoring of diseases including cancers, whereas disease detection based on exosomes at the metabolic level is rarely reported. Herein, the specific aptamer-coupled Au-decorated polymorphic carbon (CoMPC@Au-Apt) is constructed for the capture of urinary exosomes from early GC patients and healthy controls (HCs) and the subsequent exosome metabolic pattern profiling without extra elution process. Combining with machine learning algorithm on all exosome metabolic patterns, the early GC patients are excellently discriminated from HCs, with an accuracy of 100% for both the discovery set and blind test. Ulteriorly, three key metabolic features with clear identities are determined as a biomarker panel, obtaining a more than 90% diagnostic accuracy for early GC in the discovery set and validation set. Moreover, the change law of the key metabolic features along with GC development is revealed through making a comparison among HCs and GC at early stage and advanced stage, manifesting their monitoring ability toward GC. This work illustrates the high specificity of exosomes and the great prospective of exosome metabolic analysis in disease diagnosis and monitoring, which will promote exosome-driven precision medicine toward practical clinical application.

Single-Walled Carbon Nanohorns as Boosting Surface for the Analysis of Low-Molecular-Weight Compounds by SALDI-MS

Limits of Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry (MS) in the study of small molecules are due to matrix-related interfering species in the low m/z range. Single-walled carbon nanohorns (SWCNH) were here evaluated as a specific surface for the rapid analysis of amino acids and lipids by Surface-Assisted Laser Desorption Ionization (SALDI). The method was optimized for detecting twenty amino acids, mainly present as cationized species, with the [M+K]⁺ response generally 2-time larger than the [M+Na]⁺ one. The [M+Na]⁺/[M+K]⁺ signals ratio was tentatively correlated with the molecular weight, dipole moment and binding affinity, to describe the amino acids’ coordination ability. The SWCNH-based surface was also tested for analyzing triglycerides in olive oil samples, showing promising results in determining the percentage composition of fatty acids without any sample treatment. Results indicated that SWCNH is a promising substrate for the SALDI-MS analysis of low molecular weight compounds with different polarities, enlarging the analytical platforms for MALDI applications.

Recent advances and applications of synthetic diamonds in solid-phase extraction and high-performance liquid chromatography

Since the advent of diamond-based adsorbents in the late 1960s, the interest in their use for solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC) has steadily increased. This is primarily due to their unique properties, such as extreme chemical and thermal stability, high mechanical strength and biocompatibility, and complex mixed-mode retention mechanisms. Currently, the most commonly used synthetic diamonds in SPE and HPLC are detonation nanodiamonds (DND), high-pressure high-temperature (HPHT) diamonds, and chemical vapour deposition (CVD) diamonds. These diamonds have been either used as individual particles (in both modified and unmodified forms), or for surface modification, or entrapped within composites and core-shell particles to develop new diamond-based adsorbents. These diamond-based adsorbents have been used for a variety of applications, including streamlined proteome analysis; extraction of anions, cations, actinides, uranium, lanthanides, alkaline earth metals, transition metals, and post-transition metals; and development of reversed-phase, normal phase, hydrophilic interaction, ion chromatography, and mixed-mode liquid chromatography columns, to name but a few. These varied applications of different types of diamonds are typically governed by their specific properties. This review discusses the various surface and bulk properties of DND, HPHT diamonds, and CVD diamonds that facilitate or limit their use in different SPE and HPLC based applications.

Application of Nanotechnology in Cancer Diagnosis and Therapy - A Mini-Review

Cancer is a leading cause of death and poor quality of life globally. Even though several strategies are devised to reduce deaths, reduce chronic pain and improve the quality of life, there remains a shortfall in the adequacies of these cancer therapies. Among the cardinal steps towards ensuring optimal cancer treatment are early detection of cancer cells and drug application with high specificity to reduce toxicities. Due to increased systemic toxicities and refractoriness with conventional cancer diagnostic and therapeutic tools, other strategies including nanotechnology are being employed to improve diagnosis and mitigate disease severity. Over the years, immunotherapeutic agents based on nanotechnology have been used for several cancer types to reduce the invasiveness of cancerous cells while sparing healthy cells at the target site. Nanomaterials including carbon nanotubes, polymeric micelles and liposomes have been used in cancer drug design where they have shown considerable pharmacokinetic and pharmacodynamic benefits in cancer diagnosis and treatment. In this review, we outline the commonly used nanomaterials which are employed in cancer diagnosis and therapy. We have highlighted the suitability of these nanomaterials for cancer management based on their physicochemical and biological properties. We further reviewed the challenges that are associated with the various nanomaterials which limit their uses and hamper their translatability into the clinical setting in certain cancer types.

The Effect of Oxidative Debris on the Laser Desorption/Ionization Efficiency of Graphene Oxide Derivatives for Mass Spectrometric Analysis of Small Molecules and Synthetic Polymers

The influence of oxidative debris (OD) on laser desorption/ionization time of flight mass spectrometry (LDI-TOF-MS) analysis using graphene oxide (GO) derivatives was systematically investigated. Specifically, the effects on LDI-TOF-MS analysis of small molecules and synthetic polymers were highlighted. The analytical efficiency of GO was significantly enhanced by removing OD from its surface and the working molecular weight range of GO was considerably extended for analysis of synthetic polymers and small molecules.

Drawing a different picture with pencil lead as matrix-assisted laser desorption/ionization matrix for fullerene derivatives

Inspired by reports on the use of pencil lead as a matrix-assisted laser desorption/ionization matrix, paving the way towards matrix-free matrix-assisted laser desorption/ionization, the present investigation evaluates its usage with organic fullerene derivatives. Currently, this class of compounds is best analysed using the electron transfer matrix trans-2-[3-(4-tert-butylphenyl)-2-methyl-2-propenylidene] malononitrile (DCTB), which was employed as the standard here. The suitability of pencil lead was additionally compared to direct (i.e. no matrix) laser desorption/ionization-mass spectrometry. The use of (DCTB) was identified as the by far gentler method, producing spectra with abundant molecular ion signals and much reduced fragmentation. Analytically, pencil lead was found to be ineffective as a matrix, however, appears to be an extremely easy and inexpensive method for producing sodium and potassium adducts.

A layer-by-layer assembled MoS2 thin film as an efficient platform for laser desorption/ionization mass spectrometry analysis of small molecules

A chip-based platform for laser desorption/ionization mass spectrometry (LDI-MS) analysis of small molecules was developed by utilizing layer-by-layer (LBL) assembly of MoS2 nanoflakes and polyallylamine on an arbitrary substrate. The LDI-MS efficiency of small molecules on MoS2 films increased as a function of LBL assembly cycles until reaching a saturation point. The optimized MoS2 nanoflake film exhibits high LDI-MS efficiency, salt tolerance, reusability and uniform ionic signal distribution, and its performance was further enhanced by surface modification with perfluoroalkanes mimicking a clathrate nanostructure.

Fabrication of Nanostructured Mesoporous Germanium for Application in Laser Desorption Ionization Mass Spectrometry

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) is a high-throughput analytical technique ideally suited for small-molecule detection from different bodily fluids (e.g., saliva, urine, and blood plasma). Many SALDI-MS substrates require complex fabrication processes and further surface modifications. Furthermore, some substrates show instability upon exposure to ambient conditions and need to be kept under special inert conditions. We have successfully optimized mesoporous germanium (meso-pGe) using bipolar electrochemical etching and efficiently applied meso-pGe as a SALDI-MS substrate for the detection of illicit drugs such as in the context of workplace, roadside, and antiaddictive drug compliance. Argon plasma treatment improved the meso-pGe efficiency as a SALDI-MS substrate and eliminated the need for surface functionalization. The resulting substrate showed a precise surface geometry tuning by altering the etching parameters, and an outstanding performance for illicit drug detection with a limit of detection in Milli-Q water of 1.7 ng/mL and in spiked saliva as low as 5.3 ng/mL for cocaine. The meso-pGe substrate had a demonstrated stability over 56 days stored in ambient conditions. This proof-of-principle study demonstrates that meso-pGe can be reproducibly fabricated and applied as an analytical SALDI-MS substrate which opens the door for further analytical and forensic high-throughput applications.

Tracking Invisible Transformations of Physisorbed Monolayers: LDI-TOF and MALDI-TOF Mass Spectrometry as Complements to STM Imaging

Triphenyleneethynylene (TPEE) derivatives bearing one long aliphatic chain on each terminal aryl ring and two short aliphatic chains on the central aryl ring (core chains) self-assemble single component and 1-D patterned, two-component, crystalline monolayers at the solution-graphite interface. The monolayer morphology directs the core chains off the graphite, making them accessible for chemical reactions but invisible to imaging by scanning tunneling microscopy (STM). This precludes using STM to monitor transformations of the core chains, either by reaction or solution-monolayer exchange of TPEE molecules. Laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) successfully identifies TPEE compounds within physisorbed monolayers. The LDI-TOF spectra of TPEE monolayer-graphite samples exhibit strong molecular ion peaks and minimal fragmentation or background. LDI-TOF and STM techniques are combined to evaluate monolayer composition and morphology, track solution-monolayer exchange, to identify reaction products and to measure kinetics of chemical reactions at the solution-monolayer interface. LDI-TOF MS provides rapid qualitative evaluation of monolayer composition across a graphite substrate. Challenges to quantitative composition evaluation by LDI-TOF include compound-specific light absorption, surface desorption/ionization and fragmentation characteristics. For some, but not all, compounds, applying matrix onto a self-assembled monolayer increases molecular ion intensities and affords more accurate assessment of monolayer composition via matrix assisted laser desorption/ionization (MALDI) MS. Matrix addition precludes subsequent chemical or STM studies of the monolayer, whereas reactions and STM may be performed at nonirradiated regions following LDI-TOF measurements. LDI- and MALDI-TOF MS are useful complements to STM and are easily implemented tools for study of physisorbed monolayers.

Recent Developments in Solid-Phase Extraction for Near and Attenuated Total Reflection Infrared Spectroscopic Analysis

A review with more than 100 references on the principles and recent developments in the solid-phase extraction (SPE) prior and for in situ near and attenuated total reflection (ATR) infrared spectroscopic analysis is presented. New materials, chromatographic modalities, experimental setups and configurations are described. Their advantages for fast sample preparation for distinct classes of compounds containing different functional groups in order to enhance selectivity and sensitivity are discussed and compared. This is the first review highlighting both the fundamentals of SPE, near and ATR spectroscopy with a view to real sample applicability and routine analysis. Most of real sample analyses examples are found in environmental research, followed by food- and bioanalysis. In this contribution a comprehensive overview of the most potent SPE-NIR and SPE-ATR approaches is summarized and provided.

Direct matrix-assisted laser desorption ionization time-of-flight mass spectrometric analysis of lysozyme contained in hen egg white

As a natural antibacterial peptide, lysozyme (LZ) is widely used in medicine and the food industry. Despite many years of research on this compound, its new antibacterial properties are still to be determined. The primary aim of this work is to demonstrate the application of the matrix-assisted laser desorption ionization (MALDI) time-of-flight mass spectrometric analysis of LZ directly in hen egg white samples without extraction thereof. The egg white samples were kept over 10 weeks at room temperature and measured every week. The resulting positive and negative ion mass spectra were then compared to determine the intensity of the LZ mass peak. Storage of the egg white for over 10 weeks did not influence the LZ mass peak intensity (both positive and negative). It can be concluded that the LZ concentration in the egg white samples did not vary with time. The effect of the matrix/sample ratio on LZ detection was also examined, and it was found to be different in the case of positive and negative ionization. The mass peaks of LZ oligomeric forms were observed in all mass spectra, so the MALDI method could be used in subsequent studies.

Influence of surface melting effects and availability of reagent ions on LDI-MS efficiency after UV laser irradiation of Pd nanostructures

In this study, the influence of surface morphology, reagent ions and surface restructuring effects on atmospheric pressure laser desorption/ionization (LDI) for small molecules after laser irradiation of palladium self-assembled nanoparticular (Pd-NP) structures has been systematically studied. The dominant role of surface morphology during the LDI process, which was previously shown for silicon-based substrates, has not been investigated for metal-based substrates before. In our experiments, we demonstrated that both the presence of reagent ions and surface reorganization effects--in particular, melting--during laser irradiation was required for LDI activity of the substrate. The synthesized Pd nanostructures with diameters ranging from 60 to 180 nm started to melt at similar temperatures, viz. 890-898 K. These materials exhibited different LDI efficiencies, however, with Pd-NP materials being the most effective surface in our experiments. Pd nanostructures of diameters >400-800 nm started to melt at higher temperatures, >1000 K, making such targets more resistant to laser irradiation, with subsequent loss of LDI activity. Our data demonstrated that both melting of the surface structures and the presence of reagent ions were essential for efficient LDI of the investigated low molecular weight compounds. This dependence of LDI on melting points was exploited further to improve the performance of Pd-NP-based sampling targets. For example, adding sodium hypophosphite as reducing agent to Pd electrolyte solutions during synthesis lowered the melting points of the Pd-NP materials and subsequently gave reduced laser fluence requirements for LDI.

Magnetic graphene composites as both an adsorbent for sample enrichment and a MALDI-TOF MS matrix for the detection of nitropolycyclic aromatic hydrocarbons in PM2.5

Magnetic graphene composites were synthesized and applied for MALDI-TOFMS analysis of 3 nitropolycyclic aromatic hydrocarbons in PM_2.5.

Matrix-assisted laser desorption/ionization, nanostructure-assisted laser desorption/ionization and carbon nanohorns in the detection of antineoplastic drugs. 1. The cases of irinotecan, sunitinib and 6-alpha-hydroxy paclitaxel

The development of surface-assisted laser desorption/ionization (SALDI) methodologies in mass spectrometry allows, in principle, the development of new analytical approaches to qualitative and quantitative measurements on small molecules. Some of these methods have been applied to characterize two antineoplastic drugs: irinotecan (1) and sunitinib (2), and also 6-α-hydroxy-paclitaxel (3), the main metabolite of paclitaxel. Three different SALDI approaches have been tested employing nanostructure- assisted laser desorption/ionization (NALDI), carbon nanohorns (NHs) and carbon nanohorns covered by liquid additives. The results so obtained have been compared to those observed under matrix-assisted laser desorption/ionization (MALDI) conditions. Compounds 1 and 2 show the easy formation of protonated molecular species under all the experimental conditions, but the highest absolute intensity was achieved by NALDI. On the contrary, ionic species of low intensity are present for 3, among which are those that exhibit the highest intensity caused by [M+K](+) ions. After a critical evaluation of the obtained data, the linear response of the [M+H](+) ion intensity of 1 versus different deposited sample amounts was investigated, and the best results (R(2) = 0.9889) were obtained under MALDI conditions. The analysis of plasma samples spiked with 1 showed, again, that the MALDI approach was the best one (R(2) = 0.9766). The failure of NALDI measurements could be rationalized by the presence of ion suppression effects.

Minimization of fragmentation and aggregation by laser desorption laser ionization mass spectrometry

Measuring average quantities in complex mixtures can be challenging for mass spectrometry, as it requires ionization and detection with nearly equivalent cross-section for all components, minimal matrix effect, and suppressed signal from fragments and aggregates. Fragments and aggregates are particularly troublesome for complex mixtures, where they can be incorrectly assigned as parent ions. Here we study fragmentation and aggregation in six aromatic model compounds as well as petroleum asphaltenes (a naturally occurring complex mixture) using two laser-based ionization techniques: surface assisted laser desorption ionization (SALDI), in which a single laser desorbs and ionizes solid analytes; and laser ionization laser desorption mass spectrometry (L(2)MS), in which desorption and ionization are separated spatially and temporally with independent lasers. Model compounds studied include molecules commonly used as matrices in single laser ionization techniques such as matrix assisted laser desorption ionization (MALDI). We find significant fragmentation and aggregation in SALDI, such that individual fragment and aggregate peaks are typically more intense than the parent peak. These fragment and aggregate peaks are expected in MALDI experiments employing these compounds as matrices. On the other hand, we observe no aggregation and only minimal fragmentation in L(2)MS. These results highlight some advantages of L(2)MS for analysis of complex mixtures such as asphaltenes.

Advances of vibrational spectroscopic methods in phytomics and bioanalysis

During the last couple of years great advances in vibrational spectroscopy including near-infrared (NIR), mid-infrared (MIR), attenuated total reflection (ATR) and imaging and also mapping techniques could be achieved. On the other hand spectral treatment features have improved dramatically allowing filtering out relevant information from spectral data much more efficiently and providing new insights into the biochemical composition. These advances offer new possible quality control strategies in phytomics and enable to get deeper insights into biochemical background in terms of medicinal relevant questions. It is the aim of the present article pointing out the technical and methodological advancements in the NIR and MIR field and to demonstrate the individual methods efficiency by discussing distinct selected applications.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: an update for 2007-2008

This review is the fifth update of the original review, published in 1999, on the application of MALDI mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2008. The first section of the review covers fundamental studies, fragmentation of carbohydrate ions, use of derivatives and new software developments for analysis of carbohydrate spectra. Among newer areas of method development are glycan arrays, MALDI imaging and the use of ion mobility spectrometry. The second section of the review discusses applications of MALDI MS to the analysis of different types of carbohydrate. Specific compound classes that are covered include carbohydrate polymers from plants, N- and O-linked glycans from glycoproteins, biopharmaceuticals, glycated proteins, glycolipids, glycosides and various other natural products. There is a short section on the use of MALDI mass spectrometry for the study of enzymes involved in glycan processing and a section on the use of MALDI MS to monitor products of the chemical synthesis of carbohydrates with emphasis on carbohydrate-protein complexes and glycodendrimers. Corresponding analyses by electrospray ionization now appear to outnumber those performed by MALDI and the amount of literature makes a comprehensive review on this technique impractical. However, most of the work relating to sample preparation and glycan synthesis is equally relevant to electrospray and, consequently, those proposing analyses by electrospray should also find material in this review of interest.

Quantitative analysis of phospholipids using nanostructured laser desorption ionization targets

Since its introduction as an ionization technique in mass spectrometry, matrix-assisted laser desorption ionization (MALDI) has been applied to a wide range of applications. Quantitative small molecule analysis by MALDI, however, is limited due to the presence of intense signals from the matrix coupled with non-homogeneous surfaces. The surface used in nano-structured laser desorption ionization (NALDI) eliminates the need for a matrix and the resulting interferences, and allows for quantitative analysis of small molecules. This study was designed to analyze and quantitate phospholipid components of liposomes. Here we have developed an assay to quantitate the DPPC and DC(8,9)PC in liposomes by NALDI following various treatments. To test our method we chose to analyze a liposome system composed of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and DC(8,9)PC (1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine), as DC(8,9)PC is known to undergo cross-linking upon treatment with UV (254 nm) and this reaction converts the monomer into a polymer. First, calibration curves for pure lipids (DPPC and DC(8,9)PC) were created using DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) as an internal standard. The calibration curve for both DPPC and DC(8,9)PC showed an R(2) of 0.992, obtained using the intensity ratio of analyte and internal standard. Next, DPPC:DC(8,9)PC liposomes were treated with UV radiation (254 nm). Following this treatment, lipids were extracted from the liposomes and analyzed. The analysis of the lipids before and after UV exposure confirmed a decrease in the signal of DC(8,9)PC of about 90%. In contrast, there was no reduction in DPPC signal.

Matrix interference-free method for the analysis of small molecules by using negative ion laser desorption/ionization on graphene flakes

This work presents a new approach for the analysis of small molecules with direct negative ion laser desorption/ionization (LDI) on graphene flakes. A series of matrix interference-free mass spectra were obtained for the analysis of a wide range of small molecules including peptides, amino acids, fatty acids, as well as nucleosides and nucleotides. The mixture of analytes and graphene flakes suspension were directly pipetted onto a sample plate for LDI-time-of-flight mass spectrometry (TOFMS) analysis. Deprotonated monomeric species [M-H](-) ions were homogeneously obtained on uniform graphene flakes film when negative ion mode was applied. In positive ion mode, the analytes were detected in form of multiple adduct ions such as sodium adduct [M+Na](+), potassium adduct [M+K](+), double sodium adduct [M+2Na-H](+), double potassium adduct [M+2K-H](+), as well as sodium and potassium mixed adduct [M+Na+K-H](+). Better sensitivity and reproducibility were achieved in negative ion mode compared to positive ion mode. It is believed that the new method of matrix interference-free negative ion LDI on graphene flakes may be expanded for LDI-MS analysis of various small molecules.

A sample preparation method for gold nanoparticle-assisted laser desorption/ionization time-of-flight mass spectrometry

A sample preparation method to detect small molecules in laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) was developed using bare gold nanoparticles (AuNPs) as matrices. In this sample preparation method, the analyte is deposited first and then followed by the bare AuNPs. Neutral steroids and carbohydrates, which are difficult to ionize, using organic matrices, are cationized efficiently by combining AuNP-assisted LDI-TOF MS with this sample preparation method. As compared to the dried-droplet method (i.e., analyte and bare AuNPs are mixed and dried together), this method offers distinct advantages for improving shot-to-shot reproducibility, increasing the ionization efficiency of the analyte, and reducing sample preparation time.

Biomedical application of MALDI mass spectrometry for small-molecule analysis

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is an emerging analytical tool for the analysis of molecules with molar masses below 1,000 Da; that is, small molecules. This technique offers rapid analysis, high sensitivity, low sample consumption, a relative high tolerance towards salts and buffers, and the possibility to store sample on the target plate. The successful application of the technique is, however, hampered by low molecular weight (LMW) matrix-derived interference signals and by poor reproducibility of signal intensities during quantitative analyses. In this review, we focus on the biomedical application of MALDI-MS for the analysis of small molecules and discuss its favorable properties and its challenges as well as strategies to improve the performance of the technique. Furthermore, practical aspects and applications are presented.

Application of Nanodiamonds in Biomolecular Mass Spectrometry

The combination of nanodiamond (ND) with biomolecular mass spectrometry (MS) makes rapid, sensitive detection of biopolymers from complex biosamples feasible. Due to its chemical inertness, optical transparency and biocompatibility, the advantage of NDs in MS study is unique. Furthermore, functionalization on the surfaces of NDs expands their application in the fields of proteomics and genomics for specific requirements greatly. This review presents methods of MS analysis based on solid phase extraction and elution on NDs and different application examples including peptide, protein, DNA, glycan and others. Owing to the quick development of nanotechnology, surface chemistry, new MS methods and the intense interest in proteomics and genomics, a huge increase of their applications in biomolecular MS analysis in the near future can be predicted.

Functionalized pyrolytic highly oriented graphite polymer film for surface-assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low-mass analytes in environmental analysis by surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI-MS using oxidized PGS (PGS-SALDI-MS) can be used to detect [M-H]- ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten-fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS-SALDI-MS and the calibration curve showed a wide linear dynamic range of response (20-1000 ppb). The combination of atmospheric pressure ionization and PGS (AP-PGS-SALDI) showed greater signal intensity than vacuum PGS-SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4-hydroxy-2-chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS-SALDI-MS. In addition, we found that nonafluoro-1-butanesulfonic acid was able to produce protonated peptides in positive ion PGS-SALDI-MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI-MS.

Gold nanoparticles as assisted matrices for the detection of biomolecules in a high-salt solution through laser desorption/ionization mass spectrometry

Citrate-capped gold nanoparticles (AuNPs) serve as matrices for the determination of biomolecules in a high-salt solution through matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). In the case of using 2,5-dihydroxybenzoic acid (2,5-DHB) as a matrix, the signal intensities of neutral steroids were severely suppressed in a high-salt solution. A high concentration of NaCl caused the formation of the sodium adduct ions during the desorption/ionization process, resulting in a decrease of the signal intensities of the protonated ions. In comparison, by applying AuNP-assisted LDI-TOF-MS, the signal intensities of neutral steroids remained almost constant when the concentration of NaCl was increased to 500 mM. Because the use of citrate-capped AuNPs as matrices primarily offers alkali metal ion adducts, AuNP matrices have a higher tolerance to high NaCl concentrations relative to that of 2,5-DHB matrices. The relevant phenomena are also discovered in the case of analysis of neutral carbohydrate, monosialoganglioside, indolamine, and angiotensin I. The quantification of small molecules in a high-salt solution has been accomplished by AuNP-assisted LDI-TOF-MS coupled to a unique sample preparation, in which samples are deposited onto the sample plate before AuNPs. The present method has been further applied to the determination of urea, creatinine, uric acid, and glucose in a urine sample.