Preparation of coculture system with three extracellular matrices using capillary force lithography and layer-by-layer deposition

In vitro strategies for mimicking dynamic cell-ECM reciprocity in 3D culture models

The extracellular microenvironment regulates cell decisions through the accurate presentation at the cell surface of a complex array of biochemical and biophysical signals that are mediated by the structure and composition of the extracellular matrix (ECM). On the one hand, the cells actively remodel the ECM, which on the other hand affects cell functions. This cell-ECM dynamic reciprocity is central in regulating and controlling morphogenetic and histogenetic processes. Misregulation within the extracellular space can cause aberrant bidirectional interactions between cells and ECM, resulting in dysfunctional tissues and pathological states. Therefore, tissue engineering approaches, aiming at reproducing organs and tissues in vitro, should realistically recapitulate the native cell-microenvironment crosstalk that is central for the correct functionality of tissue-engineered constructs. In this review, we will describe the most updated bioengineering approaches to recapitulate the native cell microenvironment and reproduce functional tissues and organs in vitro. We have highlighted the limitations of the use of exogenous scaffolds in recapitulating the regulatory/instructive and signal repository role of the native cell microenvironment. By contrast, strategies to reproduce human tissues and organs by inducing cells to synthetize their own ECM acting as a provisional scaffold to control and guide further tissue development and maturation hold the potential to allow the engineering of fully functional histologically competent three-dimensional (3D) tissues.

A comparative evaluation of layer-by-layer assembly techniques for surface modification of microcarriers used in human mesenchymal stromal cell manufacturing

The demand for large quantities of highly potent human mesenchymal stromal cells (hMSCs) is growing given their therapeutic potential. To meet high production needs, suspension-based cell cultures using microcarriers are commonly used. Microcarriers are commonly made of or coated with extracellular matrix proteins or charged compounds to promote cell adhesion and proliferation. In this work, we demonstrate a simple method (draining filter) to perform layer by layer (LbL) assembly on microcarriers to create multilayers of heparin and collagen and further demonstrate that these multilayers have a positive effect on hMSC viability after 48 hours of culture. The draining filter method is evaluated against two other methods found in literature - centrifugation and fluidized bed, showing that the draining filter method can perform the surface modification with greater efficiency and with less materials and steps needed in the coating process. This article is protected by copyright. All rights reserved.

Micro and Nanofabrication methods to control cell-substrate interactions and cell behavior: A review from the tissue engineering perspective

Cell-substrate interactions play a crucial role in the design of better biomaterials and integration of implants with the tissues. Adhesion is the binding process of the cells to the substrate through interactions between the surface molecules of the cell membrane and the substrate. There are several factors that affect cell adhesion including substrate surface chemistry, topography, and stiffness. These factors physically and chemically guide and influence the adhesion strength, spreading, shape and fate of the cell. Recently, technological advances enabled us to precisely engineer the geometry and chemistry of substrate surfaces enabling the control of the interaction cells with the substrate. Some of the most commonly used surface engineering methods for eliciting the desired cellular responses on biomaterials are photolithography, electron beam lithography, microcontact printing, and microfluidics. These methods allow production of nano- and micron level substrate features that can control cell adhesion, migration, differentiation, shape of the cells and the nuclei as well as measurement of the forces involved in such activities. This review aims to summarize the current techniques and associate these techniques with cellular responses in order to emphasize the effect of chemistry, dimensions, density and design of surface patterns on cell-substrate interactions. We conclude with future projections in the field of cell-substrate interactions in the hope of providing an outlook for the future studies.

Capillary force lithography: the versatility of this facile approach in developing nanoscale applications

Since its inception as a simple, low cost alternative to more complicated lithographic techniques such as electron-beam and dip-pen lithography, capillary force lithography (CFL) has developed into a versatile tool to form sub-100 nm patterns. Utilizing the concept of a polymer melt, structures and devices generated by the technique have been used in applications varying from surfaces regulating cell growth to gas sensing. In this review, we discuss various CFL methodologies which have evolved, their application in both biological and non-biological research, and finally a brief outlook in areas of research where CFL is destined to make an enormous impact in the near future.

Effect of matrine on primary human hepatocytes in vitro

Matrine is a bioactive component of the traditional Chinese medical herb Sophora flavescens that has been used in China to treat various kinds of diseases including virus hepatitis. However, the molecular mechanisms underlying its hepatoprotective effects remains elusive. In the present study, primary human hepatocytes were employed to elucidate the protective effects and molecular mechanisms of matrine. We observed that low concentrations of matrine had no significant impact on albumin secretion, but high concentrations (>140 mg/L) of matrine decreased the albumin secretion in hepatocytes. Western blot data indicated that matrine at 140 mg/L at 72 h induced protein expression of CYP2A6, CYP2B6 and CYP3A4. Furthermore, high concentrations of matrine reduced LDH and AST levels and were cytotoxic to hepatocytes, leading to a decreased cell viability and total protein amount. Moreover, low concentrations of matrine, enhanced the ECOD activity and decreased the level of NO2 (-) induced by cytokines in human hepatocytes. Taken together, the present study sheds novel light on the molecular mechanisms of matrine and potential application of matrine in hepatic diseases.

Generation of fluorescently labeled cell lines, C3A hepatoma cells, and human adult skin fibroblasts to study coculture models

Hepatic/nonhepatic cell cocultures are widely used in studies on the role of homo- and heterotypic interactions in liver physiology and pathophysiology. In this article, for the first time, establishment of the coculture model employing hepatoma C3A cells and human skin fibroblasts, stably expressing fluorescent markers, is described. Suitability of the model in studying coculture conditions using fluorescence microscopy and flow cytometry was examined. C3A cells spontaneously formed island-like growth patterns surrounded by fibroblasts. The "islands" size and resulting intensity of the homo- and heterotypic interactions can easily be tuned by applying various plated cells ratios. We examined the capability of the hepatoma cells to produce albumin in hepatic/nonhepatic cell cocultures. The enzyme-linked immunosorbent assay (ELISA) tests showed that greater number of fibroblasts in coculture, resulting in smaller sizes of hepatoma "islands," and thus, a larger heterotypic interface, promoted higher albumin synthesis. The use of fluorescently labeled cells in flow cytometry measurements enabled us to separately gate two cell populations and to evaluate protein expression only in/on cells of interest. Flow cytometry confirmed ELISA results indicating the highest albumin production in hepatoma cells cocultured with the greatest number of fibroblasts and the inhibited protein synthesis in coculture with osteosarcoma cells.

Hyaluronic acid based scaffolds for tissue engineering--a review

This review focuses on hyaluronic acid (HA) tissue scaffolding materials. Scaffolds are defined in terms of formation mechanisms and mode of action. Solution properties are discussed as an understanding of the hydrodynamics of HA is fundamental in optimising the subsequent modification and the chemistries behind important tissue engineering applications that are emerging from recent research on this increasingly valuable carbohydrate polymer are described. Key scaffold characteristics such as mechanical, biological function and degradation are discussed. The latest technologies behind scaffold processing are assessed and the applications of HA based scaffolds are discussed.

Preparation of immunogen-reduced and biocompatible extracellular matrices from porcine liver

Decellularized biologic matrices are plausible biomedical materials for the bioengineering in liver transplantation. However, one of the concerns for safe medical application is the lack of objective assessment of the immunogen within the materials and the in vivo immune responses to the matrices. The purpose of this study was the production of immunogen-reduced and biocompatible matrices from porcine liver. In the present study, 0.1% SDS solution was effective for removing DNA fragments and sequences encoding possible immunogenic and viral antigens within the matrices. The PCR analysis showed that galactose-α-1,3 galactose β-1,4-N-acetylglucosamine (1,3 gal), swine leukocyte antigen (SLA), and porcine endogenous retrovirus (PERV) were completely removed in the matrices. Collagen and glycosaminoglycans (GAGs) were preserved over 63%-71%, respectively, compared to those of native liver. The implanted decellularized tissues showed minimal host responses and naturally degraded within 10 weeks. In this study, we produced immunogen-reduced and biocompatible extracellular matrices from porcine liver. Although future investigations would be required to determine the mechanism of the host reaction, this study could provide useful information of porcine liver-derived biologic matrices for liver researches.

Coculture strategies in bone tissue engineering: the impact of culture conditions on pluripotent stem cell populations

The use of pluripotent stem cell populations for bone tissue regeneration provides many opportunities and challenges within the bone tissue engineering field. For example, coculture strategies have been utilized to mimic embryological development of bone tissue, and particularly the critical intercellular signaling pathways. While research in bone biology over the last 20 years has expanded our understanding of these intercellular signaling pathways, we still do not fully understand the impact of the system's physical characteristics (orientation, geometry, and morphology). This review of coculture literature delineates the various forms of coculture systems and their respective outcomes when applied to bone tissue engineering. To understand fully the key differences between the different coculture methods, we must appreciate the underlying paradigms of physiological interactions. Recent advances have enabled us to extrapolate these techniques to larger dimensions and higher geometric resolutions. Finally, the contributions of bioreactors, micropatterned biomaterials, and biomaterial interaction platforms are evaluated to give a sense of the sophistication established by a combination of these concepts with coculture systems.

Modeling neural differentiation on micropatterned substrates coated with neural matrix components

Topographical and biochemical characteristics of the substrate are critical for neuronal differentiation including axonal outgrowth and regeneration of neural circuits in vivo. Contact stimuli and signaling molecules allow neurons to develop and stabilize synaptic contacts. Here we present the development, characterization and functional validation of a new polymeric support able to induce neuronal differentiation in both PC12 cell line and adult primary skin-derived precursor cells (SKPs) in vitro. By combining a photolithographic technique with use of neural extracellular matrix (ECM) as a substrate, a biocompatible and efficient microenvironment for neuronal differentiation was developed.

Human hepatocytes and endothelial cells in organotypic membrane systems

The realization of organotypic liver model that exhibits stable phenotype is a major challenge in the field of liver tissue engineering. In this study we developed liver organotypic co-culture systems by using synthetic and biodegradable membranes with primary human hepatocytes and human umbilical vein endothelial cells (HUVEC). Synthetic membranes prepared by a polymeric blend constituted of modified polyetheretherketone (PEEK-WC) and polyurethane (PU) and biodegradable chitosan membranes were developed by phase inversion technique and used in homotypic and organotypic culture systems. The morphological and functional characteristics of cells in the organotypic co-culture membrane systems were evaluated in comparison with homotypic cultures and traditional systems. Hepatocytes in the organotypic co-culture systems exhibit compact polyhedral cells with round nuclei and well demarcated cell-cell borders like in vivo, as a result of heterotypic interaction with HUVECs. In addition HUVECs formed tube-like structures directly through the interactions with the membranes and hepatocytes and indirectly through the secretion of ECM proteins which secretion improved in the organotypic co-culture membrane systems. The heterotypic cell-cell contacts have beneficial effect on the hepatocyte albumin production, urea synthesis and drug biotransformation. The developed organotypic co-culture membrane systems elicit liver specific functions in vitro and could be applied for the realization of engineered liver tissues to be used in tissue engineering, drug metabolism studies and bioartificial liver devices.

Engineering systems for the generation of patterned co-cultures for controlling cell-cell interactions

BACKGROUND

Inside the body, cells lie in direct contact or in close proximity to other cell types in a tightly controlled architecture that often regulates the resulting tissue function. Therefore, tissue engineering constructs that aim to reproduce the architecture and the geometry of tissues will benefit from methods of controlling cell-cell interactions with microscale resolution.

SCOPE OF THE REVIEW

We discuss the use of microfabrication technologies for generating patterned co-cultures. In addition, we categorize patterned co-culture systems by cell type and discuss the implications of regulating cell-cell interactions in the resulting biological function of the tissues.

MAJOR CONCLUSIONS

Patterned co-cultures are a useful tool for fabricating tissue engineered constructs and for studying cell-cell interactions in vitro, because they can be used to control the degree of homotypic and heterotypic cell-cell contact. In addition, this approach can be manipulated to elucidate important factors involved in cell-matrix interactions.

GENERAL SIGNIFICANCE

Patterned co-culture strategies hold significant potential to develop biomimetic structures for tissue engineering. It is expected that they would create opportunities to develop artificial tissues in the future. This article is part of a Special Issue entitled Nanotechnologies - Emerging Applications in Biomedicine.

Reconstructing the differentiation niche of embryonic stem cells using biomaterials

The biochemical cues and topographical architecture of the extracellular environment extensively influence ES cell fate. The microenvironment surrounding the developing embryo presents these instructive cues in a complex and interactive manner in order to guide cell fate decisions. Current stem cell research aims to reconstruct this multifaceted embryonic niche to recapitulate development in vitro. This review focuses on 2D and 3D differentiation niches created from natural and synthetic biomaterials to guide the differentiation of ES cells toward specific lineages. Biomaterials engineered to present specific physical constraints are also reviewed for their role in differentiation.

Engineering extracellular matrix through nanotechnology

The goal of tissue engineering is the creation of a living device that can restore, maintain or improve tissue function. Behind this goal is a new idea that has emerged from twentieth century medicine, science and engineering. It is preceded by centuries of human repair and replacement with non-living materials adapted to restore function and cosmetic appearance to patients whose tissues have been destroyed by disease, trauma or congenital abnormality. The nineteenth century advanced replacement and repair strategies based on moving living structures from a site of normal tissue into a site of defects created by the same processes. Donor skin into burn wounds, tendon transfers, intestinal replacements into the urinary tract, toes to replace fingers are all examples. The most radical application is that of vital organ transplantation in which a vital part such as heart, lung or liver is removed from one donor, preserved for transfer and implanted into a patient dying of end-stage organ failure. Tissue engineering and regenerative medicine have advanced a general strategy combining the cellular elements of living tissue with sophisticated biomaterials to produce living structures of sufficient size and function to improve patients' lives. Multiple strategies have evolved and the application of nanotechnology can only improve the field. In our era, by necessity, any medical advance must be successfully commercialized to allow widespread application to help the greatest number of patients. It follows that business models and regulatory agencies must adapt and change to enable these new technologies to emerge. This brief review will discuss the science of nanotechnology and how it has been applied to this evolving field. We will then briefly summarize the history of commercialization of tissue engineering and suggest that nanotechnology may be of use in breeching the barriers to commercialization although its primary mission is to improve the technology by solving some remaining and vexing problems in its science and engineering aspects.