Production of endothelial cell-enclosing alginate-based hydrogel fibers with a cell adhesive surface through simultaneous cross-linking by horseradish peroxidase-catalyzed reaction in a hydrodynamic spinning process

Upregulation of biochemical and biophysical properties of cell-laden microfiber, silk-hyaluronic acid composite

Cell-laden filament-like hydrogels are advantageous for many applications including drug screening, tissue engineering, and regenerative medicine. However, most of the designed filament vehicles hold weak mechanical properties, which hinder their applications in specific tissue engineering. We present a binary hybrid silk and hyaluronic acid hydrogel microfiber generated through a microfluidic system to encapsulate cells with superior mechanical properties and biocompatibility. Cell-laden hydrogel microfibers were continuously produced through coaxial double orifice microfluidic device and horseradish peroxidase mediated crosslinking, which conjugated introduce phenolic moieties in the backbone of silk fibroin and HA derivatives (Silk-Ph and HA-Ph, respectively). The iterative hybrid Silk-Ph + HA-Ph fibers were fabricated in tunable size distribution between 195 and 680 μm through control of outer flow velocity. Tensile strength and maximum stain of prepared Silk-Ph + HA-Ph sample upregulated more than three times higher than the single HA-Ph sample, which demonstrated significant impacts of synthesized silk derivative in hydrogel fiber composition. The proteolytic degradation of microfibers manipulated by hyaluronidase and collagenase treatment. Encapsulation process and crosslinking did not insert any harmful effect on cell viability (> 90%) and the cells maintained their growth ability after encapsulation process. Cellular filament-like tissue fabricated from proliferation of cells in Silk-Ph + HA-Ph microfiber.

Gelatin-Based Electrospun Fibers Insolubilized by Horseradish Peroxidase-Catalyzed Cross-Linking for Biomedical Applications

Gelatin-based water-insoluble nanofibers with a diameter of 160 nm were obtained from electrospinning aqueous solutions containing gelatin with phenolic hydroxyl (Ph) moieties (Gelatin-Ph) and horseradish peroxidase (HRP). The water insolubility of the nanofibers was accomplished through HRP-catalyzed cross-linking of the Ph moieties by exposing the electrospun nanofibers to air containing hydrogen peroxide. The HRP activity in the electrospun nanofibers was 65% that of native HRP. The cytocompatibility necessary for tissue engineering applications of the water-insoluble Gelatin-Ph nanofibers was confirmed by the adhesion and viability of human embryonic kidney-derived HEK293 cells.

Horseradish peroxidase-catalyzed hydrogelation for biomedical applications

Hydrogels catalyzed by horseradish peroxidase (HRP) serve as an efficient and effective platform for biomedical applications due to their mild reaction conditions for cells, fast and adjustable gelation rate in physiological conditions, and an abundance of substrates as water-soluble biocompatible polymers.

Microfibers as Physiologically Relevant Platforms for Creation of 3D Cell Cultures

Microfibers have received much attention due to their promise for creating flexible and highly relevant tissue models for use in biomedical applications such as 3D cell culture, tissue modeling, and clinical treatments. A generated tissue or implanted material should mimic the natural microenvironment in terms of structural and mechanical properties as well as cell adhesion, differentiation, and growth rate. Therefore, the mechanical and biological properties of the fibers are of importance. This paper briefly introduces common fiber fabrication approaches, provides examples of polymers used in biomedical applications, and then reviews the methods applied to modify the mechanical and biological properties of fibers fabricated using different approaches for creating a highly controlled microenvironment for cell culturing. It is shown that microfibers are a highly tunable and versatile tool with great promise for creating 3D cell cultures with specific properties.

Fabrication of elastomeric silk fibers

Methods to generate fibers from hydrogels, with control over mechanical properties, fiber diameter, and crystallinity, while retaining cytocompatibility and degradability, would expand options for biomaterials. Here, we exploited features of silk fibroin protein for the formation of tunable silk hydrogel fibers. The biological, chemical, and morphological features inherent to silk were combined with elastomeric properties gained through enzymatic crosslinking of the protein. Postprocessing via methanol and autoclaving provided tunable control of fiber features. Mechanical, optical, and chemical analyses demonstrated control of fiber properties by exploiting the physical cross-links, and generating double network hydrogels consisting of chemical and physical cross-links. Structure and chemical analyses revealed crystallinity from 30 to 50%, modulus from 0.5 to 4 MPa, and ultimate strength 1-5 MPa depending on the processing method. Fabrication and postprocessing combined provided fibers with extensibility from 100 to 400% ultimate strain. Fibers strained to 100% exhibited fourth order birefringence, revealing macroscopic orientation driven by chain mobility. The physical cross-links were influenced in part by the drying rate of fabricated materials, where bound water, packing density, and microstructural homogeneity influenced cross-linking efficiency. The ability to generate robust and versatile hydrogel microfibers is desirable for bottom-up assembly of biological tissues and for broader biomaterial applications.

Fabrication of single and bundled filament-like tissues using biodegradable hyaluronic acid-based hollow hydrogel fibers

Hydrogel fibers with biodegradable and biocompatible features are useful for the fabrication of filament-like tissues. We developed cell-laden hyaluronic acid (HA)-based hollow hydrogel fibers to create single and bundled filament-like tissues. The cell-laden fibers were fabricated by crosslinking phenolic-substituted hyaluronic acid (HA-Ph) in an aqueous solution containing cells through a horseradish peroxidase (HRP)-catalyzed reaction in the presence of catalase by extruding the solution in ambient flow of an aqueous solution containing H₂O₂. The encapsulated cells proliferated and grew within the hollow core, and the cells formed filament-like constructs in both single and bundled fibers, which were obtained by collection on a rotating cylindrical tube. Single and bundled filament-like tissues covered with an additional heterogeneous cell layer were obtained by degrading the fiber membrane using hyaluronidase after covering the fiber surface with heterogeneous cells. Cellular viability was preserved during HA-Ph hydrogel fiber fabrication and filament-like tissue formation. These results demonstrate the feasibility of HA-based hollow hydrogel fibers obtained through HRP- and catalase-mediated reactions to engineer filament-like tissues.

Impact of immobilizing of low molecular weight hyaluronic acid within gelatin-based hydrogel through enzymatic reaction on behavior of enclosed endothelial cells

The hydrogels having the ability to promote migration and morphogenesis of endothelial cells (ECs) are useful for fabricating vascularized dense tissues in vitro. The present study explores the immobilization of low molecular weight hyaluronic acid (LMWHA) derivative within gelatin-based hydrogel to stimulate migration of ECs. The LMWHA derivative possessing phenolic hydroxyl moieties (LMWHA-Ph) was bound to gelatin-based derivative hydrogel through the horseradish peroxidase-catalyzed reaction. The motility of ECs was analyzed by scratch migration assay and microparticle-based cell migration assay. The incorporated LMWHA-Ph molecules within hydrogel was found to be preserved stably through covalent bonds during incubation. The free and immobilized LMWHA-Ph did not lose an inherent stimulatory effect on human umbilical vein endothelial cells (HUVECs). The immobilized LMWHA-Ph within gelatin-based hydrogel induced the high motility of HUVECs, accompanied by robust cytoskeleton extension, and cell subpopulation expressing CD44 cell receptor. In the presence of immobilized LMWHA-Ph, the migration distance and the number of existing HUVECs were demonstrated to be encouraged in dose-dependent and time-dependent manners. Based on the results obtained in this work, it was concluded that the enzymatic immobilization of LMWHA-Ph within gelatin-based hydrogel represents a promising approach to promote ECs' motility and further exploitation for vascular tissue engineering applications.

Engineering tissues with a perfusable vessel-like network using endothelialized alginate hydrogel fiber and spheroid-enclosing microcapsules

Development of the technique for constructing an internal perfusable vascular network is a challenging issue in fabrication of dense three-dimensional tissues in vitro. Here, we report a method for realizing it. We assembled small tissue (about 200 μm in diameter)-enclosing hydrogel microcapsules and a single hydrogel fiber, both covered with human vascular endothelial cells in a collagen gel. The microcapsules and fiber were made from alginate and gelatin derivatives, and had cell adhesive surfaces. The endothelial cells on the hydrogel constructs sprouted and spontaneously formed a network connecting the hydrogel constructs with each other in the collagen gel. Perfusable vascular network-like structure formation after degrading the alginate-based hydrogel constructs by alginate lyase was confirmed by introducing solution containing tracer particles of about 3 μm in diameter into the lumen templated by the alginate hydrogel fiber. The introduced solution flowed into the spontaneously formed capillary branches and passed around the individual spherical tissues.

Natural-based nanocomposites for bone tissue engineering and regenerative medicine: a review

Tissue engineering and regenerative medicine has been providing exciting technologies for the development of functional substitutes aimed to repair and regenerate damaged tissues and organs. Inspired by the hierarchical nature of bone, nanostructured biomaterials are gaining a singular attention for tissue engineering, owing their ability to promote cell adhesion and proliferation, and hence new bone growth, compared with conventional microsized materials. Of particular interest are nanocomposites involving biopolymeric matrices and bioactive nanosized fillers. Biodegradability, high mechanical strength, and osteointegration and formation of ligamentous tissue are properties required for such materials. Biopolymers are advantageous due to their similarities with extracellular matrices, specific degradation rates, and good biological performance. By its turn, calcium phosphates possess favorable osteoconductivity, resorbability, and biocompatibility. Herein, an overview on the available natural polymer/calcium phosphate nanocomposite materials, their design, and properties is presented. Scaffolds, hydrogels, and fibers as biomimetic strategies for tissue engineering, and processing methodologies are described. The specific biological properties of the nanocomposites, as well as their interaction with cells, including the use of bioactive molecules, are highlighted. Nanocomposites in vivo studies using animal models are also reviewed and discussed.

Microfluidic strategies for design and assembly of microfibers and nanofibers with tissue engineering and regenerative medicine applications

Fiber-based materials provide critical capabilities for biomedical applications. Microfluidic fiber fabrication has recently emerged as a very promising route to the synthesis of polymeric fibers at the micro and nanoscale, providing fine control over fiber shape, size, chemical anisotropy, and biological activity. This Progress Report summarizes advanced microfluidic methods for the fabrication of both microscale and nanoscale fibers and illustrates how different methods are enabling new biomedical applications. Microfluidic fabrication methods and resultant materials are explained from the perspective of their microfluidic device principles, including co-flow, cross-flow, and flow-shaping designs. It is then detailed how the microchannel design and flow parameters influence the variety of synthesis chemistries that can be utilized. Finally, the integration of biomaterials and microfluidic strategies is discussed to manufacture unique fiber-based systems, including cell scaffolds, cell encapsulation, and woven tissue matrices.

Fabrication of endothelial cell-laden carrageenan microfibers for microvascularized bone tissue engineering applications

Recent achievements in the area of tissue engineering (TE) have enabled the development of three-dimensional (3D) cell-laden hydrogels as in vitro platforms that closely mimic the 3D scenario found in native tissues. These platforms are extensively used to evaluate cellular behavior, cell-cell interactions, and tissue-like formation in highly defined settings. In this study, we propose a scalable and flexible 3D system based on microsized hydrogel fibers that might be used as building blocks for the establishment of 3D hydrogel constructs for vascularized bone TE applications. For this purpose, chitosan (CHT) coated κ-carrageenan (κ-CA) microfibers were developed using a two-step procedure involving ionotropic gelation (for the fiber formation) of κ-CA and its polyelectrolyte complexation with CHT (for the enhancement of fiber stability). The performance of the obtained fibers was assessed regarding their swelling and stability profiles, as well as their ability to carry and, subsequently, promote the outward release of microvascular-like endothelial cells (ECs), without compromising their viability and phenotype. Finally, the possibility of assembling and integrating these cell-laden fibers within a 3D hydrogel matrix containing osteoblast-like cells was evaluated. Overall, the obtained results demonstrate the suitability of the microsized κ-CA fibers to carry and deliver phenotypically apt microvascular-like ECs. Furthermore, it is shown that it is possible to assemble these cell-laden microsized fibers into 3D heterotypic hydrogels constructs. This in vitro 3D platform provides a versatile approach to investigate the interactions between multiple cell types in controlled settings, which may open up novel 3D in vitro culture techniques to better mimic the complexity of tissues.

Alginate-based strategies for therapeutic vascularization

Therapeutic stimulation of vessel growth to improve tissue perfusion has shown promise in many regenerative medicine and tissue engineering applications. Alginate-based biomaterial systems have been investigated for growth factor and/or cell delivery as tools for modulating vessel assembly. Growth factor encapsulation allows for a sustained release of protein and protection from degradation. Implantation of growth factor-loaded alginate constructs typically shows an increase in capillary density but without vascular stabilization. Delivery of multiple factors may improve these outcomes. Cell delivery approaches focus on stimulating vascularization either via cell release of soluble factors, cell proliferation and incorporation into new vessels or alginate prevascularization prior to implantation. These methods have shown some promise but routine clinical application has not been achieved. In this review, current research on the application of alginate for therapeutic neovascularization is presented, shortcomings are addressed and the future direction of these systems discussed.

Enzymatically-gelled amylopectin-based substrates enable on-demand harvesting cells with preserving cell-to-cell connection using saliva

The possibility of on-demand harvesting of cells using human saliva was investigated for amylopectin-based hydrogel substrate obtained through enzymatic reaction. The human epithelial cells grown on the surface of the hydrogels detached within 10 min with preserving cell-to-cell connection by soaking in the medium containing human saliva at 5% (v/v).