Clusters of neural stem/progenitor cells cultured on a soft poly(vinyl alcohol) hydrogel crosslinked by gamma irradiation

Expansion of human mesenchymal stem cells on poly(vinyl alcohol) microcarriers

Microcarriers provide a high surface-area-to-volume ratio that can realize high yields of cell products, including human mesenchymal stem cells (hMSCs). Here, we report a novel poly(vinyl alcohol) (PVA)-based microcarrier for hMSC expansion in suspension culture. PVA microcarriers were prepared as collagen-coated PVA hydrogels 181 μm in size and a high surface-area-to-weight ratio of 2945 cm2/g. The PVA microcarriers supported a 2.6-fold expansion of hMSCs in a 30-mL single-use stirred bioreactor after a 7 d culture period, comparable to that of commercially available microcarriers. Interestingly, we observed that hMSCs on PVA microcarriers adhered to adjacent microcarriers, resulting in the aggregation of hMSC-PVA microcarriers. Therefore, we conducted a long-term expansion culture using a bead-to-bead cell transfer method with PVA microcarriers. Fresh microcarriers were added to the cell-populated microcarriers in the bioreactor on days 7 and 14. hMSCs on PVA microcarriers continued to grow for 21 d using the bead-to-bead cell transfer method. Furthermore, magnetic PVA (PVA-mag) microcarriers were developed by loading magnetic nanoparticles into PVA microcarriers, and we demonstrated that these PVA-mag microcarriers enabled cell recovery by magnetic separation. These results suggest that these PVA microcarriers can contribute to the large-scale culture of hMSCs for regenerative medicine and cell therapy.

Hydrogels with Reversible Crosslinks for Improved Localised Stem Cell Retention: A Review

Successful stem cell applications could have a significant impact on the medical field, where many lives are at stake. However, the translation of stem cells to the clinic could be improved by overcoming challenges in stem cell transplantation and in vivo retention at the site of tissue damage. This review aims to showcase the most recent insights into developing hydrogels that can deliver, retain, and accommodate stem cells for tissue repair. Hydrogels can be used for tissue engineering, as their flexibility and water content makes them excellent substitutes for the native extracellular matrix. Moreover, the mechanical properties of hydrogels are highly tuneable, and recognition moieties to control cell behaviour and fate can quickly be introduced. This review covers the parameters necessary for the physicochemical design of adaptable hydrogels, the variety of (bio)materials that can be used in such hydrogels, their application in stem cell delivery and some recently developed chemistries for reversible crosslinking. Implementing physical and dynamic covalent chemistry has resulted in adaptable hydrogels that can mimic the dynamic nature of the extracellular matrix.

Mimicking the neural stem cell niche: An engineer’s view of cell: material interactions

Neural stem cells have attracted attention in recent years to treat neurodegeneration. There are two neurogenic regions in the brain where neural stem cells reside, one of which is called the subventricular zone (SVZ). The SVZ niche is a complicated microenvironment providing cues to regulate self-renewal and differentiation while maintaining the neural stem cell’s pool. Many scientists have spent years understanding the cellular and structural characteristics of the SVZ niche, both in homeostasis and pathological conditions. On the other hand, engineers focus primarily on designing platforms using the knowledge they acquire to understand the effect of individual factors on neural stem cell fate decisions. This review provides a general overview of what we know about the components of the SVZ niche, including the residing cells, extracellular matrix (ECM), growth factors, their interactions, and SVZ niche changes during aging and neurodegenerative diseases. Furthermore, an overview will be given on the biomaterials used to mimic neurogenic niche microenvironments and the design considerations applied to add bioactivity while meeting the structural requirements. Finally, it will discuss the potential gaps in mimicking the microenvironment.

Velvet antler polypeptide-loaded polyvinyl alcohol-sodium alginate hydrogels promote the differentiation of neural progenitor cells in 3D towards oligodendrocytes in vitro

Three-dimensional (3D) culture of neural progenitor cells (NPCs) in hydrogels represents a powerful means for recapitulating neurodevelopment, disease modelling and drug discovery. However, the differentiation of NPCs to oligodendrocytes in 3D scaffolds remains a great challenge. In this study, polyvinyl alcohol (PVA) - sodium alginate (SA) composite hydrogels intended for NPC culture in 3D were fabricated by ionic crosslinking between SA and calcium ions. It was demonstrated that adding PVA to the composite hydrogels resulted in increases in pore size and swelling rate and decreases in elastic moduli as the PVA proportion was enhanced. In addition, the composite hydrogels were biocompatible with mouse NPCs and improved the proliferation of the encapsulated NPCs compared with SA hydrogels. Moreover, when velvet antler polypeptides (VAPs), which were capable of facilitating the differentiation of NPCs to oligodendrocyte fate in 2D, were loaded into PVA-SA hydrogels, NPCs differentiated into neurons, astrocytes and oligodendrocytes, with the presence of VAPs promoting oligodendrogenesis in a dose-dependant manner. The present composite hydrogels provide a suitable scaffold for the construction of neural tissue engineering and neurological disease modelling.

Advanced Hydrogels for Cartilage Tissue Engineering: Recent Progress and Future Directions

Cartilage is a tension- and load-bearing tissue and has a limited capacity for intrinsic self-healing. While microfracture and arthroplasty are the conventional methods for cartilage repair, these methods are unable to completely heal the damaged tissue. The need to overcome the restrictions of these therapies for cartilage regeneration has expanded the field of cartilage tissue engineering (CTE), in which novel engineering and biological approaches are introduced to accelerate the development of new biomimetic cartilage to replace the injured tissue. Until now, a wide range of hydrogels and cell sources have been employed for CTE to either recapitulate microenvironmental cues during a new tissue growth or to compel the recovery of cartilaginous structures via manipulating biochemical and biomechanical properties of the original tissue. Towards modifying current cartilage treatments, advanced hydrogels have been designed and synthesized in recent years to improve network crosslinking and self-recovery of implanted scaffolds after damage in vivo. This review focused on the recent advances in CTE, especially self-healing hydrogels. The article firstly presents the cartilage tissue, its defects, and treatments. Subsequently, introduces CTE and summarizes the polymeric hydrogels and their advances. Furthermore, characterizations, the advantages, and disadvantages of advanced hydrogels such as multi-materials, IPNs, nanomaterials, and supramolecular are discussed. Afterward, the self-healing hydrogels in CTE, mechanisms, and the physical and chemical methods for the synthesis of such hydrogels for improving the reformation of CTE are introduced. The article then briefly describes the fabrication methods in CTE. Finally, this review presents a conclusion of prevalent challenges and future outlooks for self-healing hydrogels in CTE applications.

Improved antifouling properties of PVA hydrogel via an organic semiconductor graphitic carbon nitride catalyzed surface-initiated photo atom transfer radical polymerization

An innovative g-C₃N₄ catalyzed surface-initiated photo atom transfer radical polymerization (SI-photoATRP) has been developed to construct MEDSAH zwitterionic polymer brushes on PVA hydrogel surface. g-C₃N₄ catalyzed SI-photoATRP is temporal and spatial control. As a heterogeneous reaction system, it can solve the catalyst residues problem. After grafting with MEDSAH, surface chemical composition and morphology of PVA-g-pMEDSAH hydrogel confirmed that MEDSAH was successfully grafted onto PVA hydrogel. Thermal property of PVA-g-pMEDSAH hydrogel decreased and hydrophilicity increased. No statistically significant differences between PVA and PVA-g-pMEDSAH were observed on mechanical properties. Cytotoxicity in vitro of PVA-g-pMEDSAH hydrogel could be considered as no cytotoxicity for L929 and NDHF cells. The antifouling properties of PVA-g-pMEDSAH hydrogel were significantly improved due to the enhancement of the surface hydration and steric repulsion effects caused by pMEDSAH polymer brushes. In addition, g-C₃N₄ is easier to modify to enhance the photocatalyst property. Thus, the heterogeneous reaction system of g-C₃N₄ catalyzed SI-photoATRP has huge potential applied in biomaterials surface modification.

UV irradiation of Type I collagen gels changed the morphology of the interconnected brain capillary endothelial cells on them

We cultured mouse brain capillary endothelial cell line bEnd.3 on the UV-irradiated Type I collagen gel. Morphology of bEnd.3 cells on the Type I collagen gel was drastically changed if the gel was crosslinked by UV irradiation. The interconnecting network of bEnd.3 cells which have cord-like morphology on the soft collagen gels was converted to the monolayer of the flat cells, tightly-bound each other covering the gel surface, in a confluent state. The collagen gels were mechanically stiffened by UV irradiation for 15 min with UV light at 254 nm showing approximately two times higher value of Young's modulus E (1.51 ± 0.58 kPa) than the control gel (3.17 ± 1.17 kPa). AFM images of the collagen fibrils were not severely changed after irradiation. Collagen subunit proteins were crosslinked and degraded simultaneously under UV irradiation proved by results of SDS-PAGE and separation by centrifugation. Expression of Integrin gene was measured by quantitative real-time PCR. Expression of the integrin α2 gene, tight junction protein 1 gene, and claudin 5 gene were down-regulated in cells on the UV irradiated collagen gel in comparison with the unirradiated one while expression of the integrin β1 gene and Integrin α1 gene did not significantly change. Thick actin filaments were more clearly observed in the cells on the UV-irradiated collagen gel than the unirradiated one by fluorescent microscopy. We conclude that UV irradiation made the collagen gel stiffened and changed the physiological state of bEnd.3 cells including their adhesion, extension, and proliferation.

In Vitro Monolayer Culture of Dispersed Neural Stem Cells on the E-Cadherin-Based Substrate with Long-Term Stemness Maintenance

Neural stem cells (NSCs) play an important role in neural tissue engineering because of their capacity of self-renewal and differentiation to multiple cell lineages. The in vitro conventional neurosphere culture protocol has some limitations such as limited nutrition and oxygen penetration and distribution causing the heterogeneity of cells inside, inaccessibility of internal cells, and inhomogeneous cellular morphology and properties. As a result, cultivation as a monolayer is a better way to study NSCs and obtain a homogeneous cell population. The cadherins are a classical family of homophilic cell adhesion molecules mediating cell-cell adhesion. Here, we used a recombinant human E-cadherin mouse IgG Fc chimera protein that self-assembles on a hydrophobic polystyrene surface via hydrophobic interaction to obtain an E-cadherin-coated culture plate (ECP). The rat fetal NSCs were cultured on the ECP and routine tissue culture plate (TCP) from passage 2 to passage 5. NSCs on TCP formed uniform floating neurospheres and grew up over time, while cells on the ECP adhered on the bottom of the plate and exhibited individual cells with scattering morphology, forming intercellular connections between cells. The cell proliferation and differentiation behaviors that were evaluated by Cell Counting Kit-8 assay (CCK-8), immunofluorescence staining, and real-time quantitative polymerase chain reaction showed NSCs could maintain the capacity for self-renewal and ability to differentiate into neurons, oligodendrocytes, and astrocytes after the long-term in vitro cell culture and passaging. Therefore, our study indicated that hE-cad-Fc could provide a homogeneous environment for individual cells in monolayer conditions to maintain the capacity of self-renewal and differentiation by mimicking the cell-cell interaction.

Interaction of fibroblasts and induced pluripotent stem cells with poly(vinyl alcohol)-based hydrogel substrates

Induced pluripotent stem cells (iPSCs) provide a promising means of creating custom-tailored cell lines for cellular therapies. Their application in regenerative medicine, however, depends on the possibility that the maintenance and differentiation of cells and organs occur under defined conditions. One major component of stem cell culture systems is the substrate, where the cells must attach and proliferate. The present study aimed to investigate the putative cytotoxic effects of poly(vinyl alcohol) (PVA)-based matrices on the in vitro culture of mouse fetal fibroblasts. In addition, the PVA-based hydrogels were used to determine the capacity of bovine induced pluripotent stem cells (biPSCs) to adhere and proliferate on synthetic substrates. Our results show that both cell types interacted with the substrate and presented proliferation during culture. The biPSCs formed new colonies when cell suspensions were placed onto the hydrogel surface for culture. These results may represent a new characterized xeno-free clinical grade culture system to be widely applied in cell-based therapies.

Chitosan-Intercalated Montmorillonite/Poly(vinyl alcohol) Nanofibers as a Platform to Guide Neuronlike Differentiation of Human Dental Pulp Stem Cells

In this study, we present a novel chitosan-intercalated montmorillonite/poly(vinyl alcohol) (OMMT/PVA) nanofibrous mesh as a microenvironment for guiding differentiation of human dental pulp stem cells (hDPSCs) toward neuronlike cells. The OMMT was prepared through ion exchange reaction between the montmorillonite (MMT) and chitosan. The PVA solutions containing various concentrations of OMMT were electrospun to form 3D OMMT-PVA nanofibrous meshes. The biomechanical and biological characteristics of the nanofibrous meshes were evaluated by ATR-FTIR, XRD, SEM, MTT, and LDH specific activity, contact angle, and DAPI staining. They were carried out for mechanical properties, overall viability, and toxicity of the cells. The hDPSCs were seeded on the prepared scaffolds and induced with neuronal specific differentiation media at two differentiation stages (2 days at preinduction stage and 6 days at induction stage). The neural differentiation of the cells cultured on the meshes was evaluated by determining the expression of Oct-4, Nestin, NF-M, NF-H, MAP2, and βIII-tubulin in the cells after preinduction, at induction stages by real-time PCR (RT-PCR) and immunostaining. All the synthesized nanofibers exhibited a homogeneous morphology with a favorable mechanical behavior. The population of the cells differentiated into neuronlike cells in all the experimental groups was significantly higher than that in control group. The expression level of the neuronal specific markers in the cells cultured on 5% OMMT/PVA meshes was significantly higher than the other groups. This study demonstrates the feasibility of the OMMT/PVA artificial nerve graft cultured with hDPSCs for regeneration of damaged neural tissues. These fabricated matrices may have a potential in neural tissue engineering applications.

Generation of Large-Scale DNA Hydrogels with Excellent Blood and Cell Compatibility

Hemocompatibility and cytocompatibility of biomaterials codetermine the success of tissue engineering applications. DNA, the natural component of our cells, is an auspicious biomaterial for the generation of designable scaffolds with tailorable characteristics. In this study, a combination of rolling circle amplification and multiprimed chain amplification is used to generate hydrogels at centimeter scale consisting solely of DNA. Using an in vitro rotation model and fresh human blood, the reaction of the hemostatic system on DNA hydrogels is analyzed. The measurements of hemolysis, platelets activation, and the activation of the complement, coagulation, and neutrophils using enzyme-linked immunosorbent assays demonstrate excellent hemocompatibility. In addition, the cytocompatibility of the DNA hydrogels is tested by indirect contact (agar diffusion tests) and material extract experiments with L929 murine fibroblasts according to the ISO 10993-5 specifications and no negative impact on the cell viability is detected. These results indicate the promising potential of DNA hydrogels as biomaterials for versatile applications in the field of regenerative medicine.