Magnetic alginate microparticles for purification of $alpha;-amylases

Purification and biochemical characterization of α- amylase from Aspergillus tamarii MTCC5152

The purification and biochemical characterization of the extracellular alpha amylase from A.tamarii MTCC5152 were studied. The combined use of ion exchange and gel filtration chromatographic methods were used for purification studies. The specific activity was significantly increased (33 fold) and 19.41 fold purification of the enzyme α-amylase with 24% yield was achieved. The enzyme had an optimal pH of 6.5 and exhibited its highest activity at 55 °C. It is active over a wide range of pH 5-7 at room temperature. The enzyme is relatively stable in the temperature range of 25-35 °C for a period of 4 h hence, more suitable for industrial applications. Km and Vmax value of the enzyme was to be 5.882 mg/mL and 0.803 mg/mL/min respectively using starch as the substrate. The purified protein showed a single band on native and SDS PAGE and the molecular weight was found to be 31 kDa. Starch zymogram also revealed one clear zone of amylolytic activity which corresponded to the band obtained with native PAGE and SDS/PAGE. The characterization studies showed that the enzyme activity is inhibited by Ca2+, Mn2+, Hg2+, Fe2+.

Preparation and Characteristics of Alginate Microparticles for Food, Pharmaceutical and Cosmetic Applications

Alginates are the most widely used natural polymers in the pharmaceutical, food and cosmetic industries. Usually, they are applied as a thickening, gel-forming and stabilizing agent. Moreover, the alginate-based formulations such as matrices, membranes, nanospheres or microcapsules are often used as delivery systems. Alginate microparticles (AMP) are biocompatible, biodegradable and nontoxic carriers, applied to encapsulate hydrophilic active substances, including probiotics. Here, we report the methods most frequently used for AMP production and encapsulation of different actives. The technological parameters important in the process of AMP preparation, such as alginate concentration, the type and concentration of other reagents (cross-linking agents, oils, emulsifiers and pH regulators), agitation speed or cross-linking time, are reviewed. Furthermore, the advantages and disadvantages of alginate microparticles as delivery systems are discussed, and an overview of the active ingredients enclosed in the alginate carriers are presented.

Production, deformation and mechanical investigation of magnetic alginate capsules

In this article we investigated the deformation of alginate capsules in magnetic fields. The sensitivity to magnetic forces was realised by encapsulating an oil in water emulsion, where the oil droplets contained dispersed magnetic nanoparticles. We solved calcium ions in the aqueous emulsion phase, which act as crosslinking compounds for forming thin layers of alginate membranes. This encapsulating technique allows the production of flexible capsules with an emulsion as the capsule core. It is important to mention that the magnetic nanoparticles were stable and dispersed throughout the complete process, which is an important difference to most magnetic alginate-based materials. In a series of experiments, we used spinning drop techniques, capsule squeezing experiments and interfacial shear rheology in order to determine the surface Young moduli, the surface Poisson ratios and the surface shear moduli of the magnetically sensitive alginate capsules. In additional experiments, we analysed the capsule deformation in magnetic fields. In spinning drop and capsule squeezing experiments, water droplets were pressed out of the capsules at elevated values of the mechanical load. This phenomenon might be used for the mechanically triggered release of water-soluble ingredients. After drying the emulsion-filled capsules, we produced capsules, which only contained a homogeneous oil phase with stable suspended magnetic nanoparticles (organic ferrofluid). In the dried state, the thin alginate membranes of these particles were rather rigid. These dehydrated capsules could be stored at ambient conditions for several months without changing their properties. After exposure to water, the alginate membranes rehydrated and became flexible and deformable again. During this swelling process, water diffused back in the capsule. This long-term stability and rehydration offers a great spectrum of different applications as sensors, soft actuators, artificial muscles or drug delivery systems.

Preparation of p-aminophenol modified superparamagnetic iron oxide nanoparticles for purification of α-amylase from the bovine milk

Currently, modified Fe₃O₄ magnetic nanoparticles frequently are used as nanocarriers for proteins and enzymes purification. In the present study, Fe₃O₄ magnetic nanoparticles were prepared, and their surfaces were modified with p-aminophenol affinity ligand immobilized by different linkers. The modified nanocarriers were used for the purification of α-amylase from the bovine milk (after precipitation the casein) by affinity purification. To evaluate the effectiveness of the p-aminophenol modified magnetic nanocarriers, the three different types of nanocarriers with different linkers having varying lengths were prepared. All nanocarriers were characterized and validated using FT-IR, SEM, EDX, VSM and XRD analysis methods According to our results, p-aminophenol ligand attached to the nanocarrier by long linkers better separates the α-amylase from the casein free skim milk with 49.66% recovery and 48.18-fold purification efficiency. The results of this study showed that our novel magnetic nanocarriers have the capacity to be used for fast, reproducible and cost-effective purification of α-amylase.

Response of bacterial communities from California coastal waters to alginate particles and an alginolytic Alteromonas macleodii strain

Alginate is a major cell wall polysaccharide from marine macroalgae and nutrient source for heterotrophic bacteria. Alginate can form gel particles in contact with divalent cations as found in seawater. Here, we tested the hypothesis that alginate gel particles serve as carbon source and microhabitat for marine bacteria by adding sterile alginate particles to microcosms with seawater from coastal California, a habitat rich in alginate-containing macroalgae. Alginate particles were rapidly colonized and degraded, with three- to eightfold higher bacterial abundances and production among alginate particle-associated (PA) bacteria. 16S rRNA gene amplicon sequencing showed that alginate PA bacteria were enriched in OTUs related to Cryomorphaceae, Saprospiraceae (Bacteroidetes) and Phaeobacter (Alphaproteobacteria) towards the end of the experiment. In microcosms amended with alginate particles and the proficient alginolytic bacterium Alteromonas macleodii strain 83-1, this strain dominated the community and outcompeted Cryomorphaceae, Saprospiraceae and Phaeobacter, and PA hydrolytic activities were over 50% higher. Thus, alginolytic activity by strain 83-1 did not benefit non-alginolytic strains by cross-feeding on alginate hydrolysis or other metabolic products. Considering the global distribution and extensive biomass of alginate-containing macroalgae, the observed bacterial dynamics associated with the utilization and remineralization of alginate microhabitats promote the understanding of carbon cycling in macroalgae-rich waters worldwide.

A biotechnological perspective on the application of iron oxide magnetic colloids modified with polysaccharides

Iron oxide magnetic nanoparticles (MNPs) alone are suitable for a broad spectrum of applications, but the low stability and heterogeneous size distribution in aqueous medium represent major setbacks. These setbacks can however be reduced or diminished through the coating of MNPs with various polymers, especially biopolymers such as polysaccharides. Polysaccharides are biocompatible, non-toxic and renewable; in addition, they possess chemical groups that permit further functionalization of the MNPs. Multifunctional entities can be created through decoration with specific molecules e.g. proteins, peptides, drugs, antibodies, biomimetic ligands, transfection agents, cells, and other ligands. This development opens a whole range of applications for iron oxide nanoparticles. In this review the properties of magnetic structures composed of MNPs and several polysaccharides (Agarose, Alginate, Carrageenan, Chitosan, Dextran, Heparin, Gum Arabic, Pullulan and Starch) will be discussed, in view of their recent and future biomedical and biotechnological applications.

Applications of Alginate in Bioseparation of Proteins

Alginate is a polysaccharide that is a block polymer consisting of block units of guluronic acid and mannuronic acid. It shows inherent biological affinity for a variety of enzymes such as pectinase, lipase, phospholipase D, a and ss amylases and glucoamylase. Taking advantage of its precipitation with Ca2+ and the above-mentioned property, alginate has been used for purification of these enzymes by affinity precipitation, aqueous two phase separation, macroaffinity ligand facilitated three phase partitioning, immobilized metal affinity chromatography and expanded bed affinity chromatography. Thus, this versatile marine resource has tremendous potential in bioseparation of proteins.

Preparation and properties of magnetic nano- and microsized particles for biological and environmental separations

The paper presents a critical overview on magnetic nanoparticles and microspheres used as separation media in different fields of chemistry, biochemistry, biology, and environment protection. The preparation of most widely used magnetic iron oxides in appropriate form, their coating or encapsulation in polymer microspheres, and functionalization is discussed in the first part. In the second part, new developments in the main application areas of magnetic composite particles for separation and catalytical purposes are briefly described. They cover separations and isolations of toxic inorganic and organic ions, proteins, and other biopolymers, cells, and microorganisms. Only selected number of relevant papers could be included due to the restricted extent of the review.

Elaboration of PLLA-based superparamagnetic nanoparticles: characterization, magnetic behaviour study and in vitro relaxivity evaluation

Oleic acid-coated magnetite has been encapsulated in biocompatible magnetic nanoparticles (MNP) by a simple emulsion evaporation method. The different parameters influencing the particles size were studied. Between these parameters, the stirring speed and the polymer concentration were found to influence positively or negatively, respectively, the MNP size which varied between 320 and 1500nm. The magnetite encapsulation efficacy was about than 90% yielding a high magnetite loading of up to 30% (w/w). X-ray diffraction showed that magnetite crystalline pattern was not modified after emulsification and solvent evaporation. The X-ray photoelectron spectroscopy (XPS) results indicated the presence of less than 0.1% of iron atoms at the nanoparticles surface. Vibration simple magnetometer (VSM) showed a superparamagnetic behaviour of the MNP and a saturation magnetization increasing with the increased magnetite amount used in formulation. Moreover, T(1) and T(2) relaxivities of MNP (4.7T, 20 degrees C) were 1.7+/-0.1 and 228.3+/-13.1s(-1)mM(-1), respectively, rendering them in the same category of known negative contrast agents which shorten the T(2) relaxation time. Therefore, by using an appropriate anticancer drug in their formulation, these magnetic nanoparticles can present a promising mean for simultaneous tumor imaging, drug delivery and real time monitoring of therapeutic effect.

Nickel adsorption by magnetic alginate microcapsules containing an extractant

The adsorption of heavy metals on biomaterials was investigated by studying the potential of alginate microcapsules containing an extractant (Cyanex 272) and magnetic nanoparticles (gamma-Fe2O3) for the adsorption of nickel (II) from aqueous solutions. A two-stage kinetics behaviour was observed with 70% of the maximum sorption capacity achieved within 8 h. An increase in nickel removal with increase in pH occurred, the maximum uptake capacity being around 0.42 mmol g-1 at pH 8. The adsorption isotherm (pH about 5.3) was obtained in a wide range of initial nickel concentrations; the experimental data were fitted by a Langmuir model and the qmax value was estimated to be 0.52 mmol g-1. Moreover, including magnetic particles in the microcapsules allowed easy isolation of the beads from the aqueous solutions after the sorption process. Magnetic microcapsules are then suitable for the development of efficient biosorbents for removal and recovery of heavy metals from wastewater using magnetic separation.

Magnetic techniques for the isolation and purification of proteins and peptides

Isolation and separation of specific molecules is used in almost all areas of biosciences and biotechnology. Diverse procedures can be used to achieve this goal. Recently, increased attention has been paid to the development and application of magnetic separation techniques, which employ small magnetic particles. The purpose of this review paper is to summarize various methodologies, strategies and materials which can be used for the isolation and purification of target proteins and peptides with the help of magnetic field. An extensive list of realised purification procedures documents the efficiency of magnetic separation techniques.