Adaptation of Cupriavidus necator to conditions favoring polyhydroxyalkanoate production

Production of polyhydroxybutyrate by coupled saccharification-fermentation of inulin

Inulin is a fructose-based polysaccharide that can be found in several plant species, from grass and onions to chicory roots; thus, it has the potential to be an excellent renewable source of fructose for several industrial applications. Among them, inulin hydrolysis can be coupled to a fermentation operation to produce polyhydroxybutyrate (PHB) using Cupriavidus necator H16. This work reports the PHB production process involving chicory root inulin hydrolysis using inulinase Novozym 960 followed by a C. necator fermentation. It was found that the maximum saccharification (95% wt.) was reached at 269 U/ginulin after 90 min. The hydrolysates obtained were then inoculated with C. necator, leading to a biomass concentration of 4 g/L with 30% (w/w) polymer accumulation. Although PHB production was low, during the first hours, the cell growth and polymer accumulation detected did not coincide with a fructose concentration decrease, suggesting a simultaneous saccharification and fermentation process, potentially alleviating the product inhibition inherent to the inulinase-fructose system. The characterization of the obtained PHB showed a polymer with more homogeneous values of Mw, and better thermal stability than PHB produced using pure fructose as a fermentation substrate. The results obtained demonstrate a viable alternative carbon substrate for PHB production, opening the possibility for inulin-rich renewable feedstock valorization.

Biotransformation of starch-based wastewater into bioplastics: Optimization of poly(3-hydroxybutyrate) production by Cupriavidus necator DSM 545 using potato wastewater hydrolysate

Biodegradable biopolymers, such as polyhydroxyalkanoates (PHAs), have emerged as an alternative to petrochemical-based plastics. The present work explores the production of PHAs based on the biotransformation of potato processing wastewater and addresses two different strategies for PHA recovery. To this end, culture conditions for PHA synthesis by Cupriavidus necator DSM 545 were optimized on a laboratory scale using a response surface methodology-based experimental design. Optimal conditions rendered a PHB, poly(3-hydroxybutyrate), accumulation of 83.74 ± 2.37 % (5.1 ± 0.2 gL-1), a 1.4-fold increase compared to the initial conditions. Moreover, polymer extraction with non-halogenated agent improved PHB recovery compared to chloroform method (PHB yield up to 78.78 ± 0.57 %), while maintaining PHB purity. (99.83 ± 4.95 %). Overall, the present work demonstrated the potential valorization of starch-based wastewater by biotransformation into PHBs, a high value-added product, and showed that recovery approaches more eco-friendly than the traditional treatments could be applied to PHB recovery to some extent.

Production of Polyhydroxyalkanoates through Soybean Hull and Waste Glycerol Valorization: Subsequent Alkaline Pretreatment and Enzymatic Hydrolysis

Alkaline pretreatment and sequential enzymatic hydrolysis of soybean hull were investigated to obtain fermentable sugars for polyhydroxyalkanoates production along with residual glycerol as low-cost carbon sources. Soybean hull is composed of approximately 32% cellulose, 12% hemicellulose, 6% lignin, and 11% protein. Alkaline pretreatment was carried out with 2% NaOH concentration, 10% (w/v) biomass loading, and 60 min incubation time in an autoclave at 120 °C. The response surface methodology (RSM) based on the central composite design (CCD) tool was employed to optimize the enzymatic hydrolysis process, where the variables of biomass loading, enzymes’ concentration, and time were considered. The maximum total reducing sugars concentration obtained was 115.9 g∙L−1 with an enzyme concentration of 11.5 mg protein/g dry substrate for enzyme preparation B1, 2.88 mg protein/g dry substrate for XylA, and 57.6 U/g dry substrate for β-glucosidase, after 42 h at 45 °C, and pH was 4.5. Subsequently, the saccharification step was conducted by increasing the processing scale, using a 1 L tank with stirring with a controlled temperature. Implementing the same enzyme concentrations at pH 4.5, temperature of 45 °C, 260 mL working volume, and incubation time of 42 h, under fed-batch operation with substrate feeding after 14 h and 22 h, a hydrolysate with a concentration of 185.7 g∙L−1 was obtained. Initially, to verify the influence of different carbon sources on Cupriavidus necator DSMz 545 in biomass production, batch fermentations were developed, testing laboratory-grade glucose, soybean hull hydrolysate, and waste glycerol (a by-product of biodiesel processing available in large quantities) as carbon sources in one-factor-at-a-time assays, and the mixture of soybean hull hydrolysate and waste glycerol. Then, the hydrolysate and waste glycerol were consumed by C. necator, producing 12.1 g∙L−1 of biomass and achieving 39% of polyhydroxyalkanoate (PHB) accumulation. To the best of our knowledge, this is the first time that soybean hull hydrolysate has been used as a carbon source to produce polyhydroxyalkanoates, and the results suggest that this agro-industrial by-product is a viable alternative feedstock to produce value-added components.

Evaluation of different nutrient limitation strategies for the efficient production of poly(hydroxybutyrate-co-hydroxyvalerate) from waste frying oil and propionic acid in high cell density fermentations of Cupriavidus necator H16

Because of its application potential and biodegradability, poly(3-hydroxybutyrate-co-3-hydroxyvalerate;PHBV), a member of the polyhydroxyalkanoates (PHA) biopolymer family, is one of the most extensively studied PHA. High PHBV productivity with a significant amount of hydroxyvalerate (HV) content is very appealing for commercial scale production. The goal of this study was to investigate the efficiency of various defined limitation strategies, namely nitrogen, phosphorus, and oxygen-limitation, for high yield PHBV production by Cupriavidus necator H16 with increased HV unit using waste frying vegetable oil (WFO) and propionic acid (PA) in a high cell density culture (5 L bioreactor). With optimized WFO and PA feeding, highest PHBV harvest (121.7 ± 2.59 g/L; HV 13.9 ± 0.44% (w/w)) and volumetric productivity (2.03 ± 0.04 gPHBV/L·h) were obtained in oxygen-limited operation, while highest HV content (19.8 ± 0.28 wt%) and yield coefficient (0.43 ± 0.017 gHV/gPA) were observed during phosphorus-limited cultivation. Although nitrogen limitation is widely applied in the production of PHA, nitrogen-limited cultivation had the lowest cell dry matter, PHBV production, volumetric productivity, oil-to-HB and PA-to-HV yield coefficients for the given conditions. The results of the present study demonstrate the highest PHBV yield together with the highest HV content using WFO as main carbon source and PA as the HV precursor ever reported in the literature.

Advances and trends in microbial production of polyhydroxyalkanoates and their building blocks

With the rapid development of synthetic biology, a variety of biopolymers can be obtained by recombinant microorganisms. Polyhydroxyalkanoates (PHA) is one of the most popular one with promising material properties, such as biodegradability and biocompatibility against the petrol-based plastics. This study reviews the recent studies focusing on the microbial synthesis of PHA, including chassis engineering, pathways engineering for various substrates utilization and PHA monomer synthesis, and PHA synthase modification. In particular, advances in metabolic engineering of dominant workhorses, for example Halomonas, Ralstonia eutropha, Escherichia coli and Pseudomonas, with outstanding PHA accumulation capability, were summarized and discussed, providing a full landscape of diverse PHA biosynthesis. Meanwhile, we also introduced the recent efforts focusing on structural analysis and mutagenesis of PHA synthase, which significantly determines the polymerization activity of varied monomer structures and PHA molecular weight. Besides, perspectives and solutions were thus proposed for achieving scale-up PHA of low cost with customized material property in the coming future.

Dynamic Metabolic Analysis of Cupriavidus necator DSM545 Producing Poly(3-hydroxybutyric acid) from Glycerol

Cupriavidus necator DSM 545 can utilise glycerol to synthesise poly(3-hydroxybutyric acid) under unbalanced growth conditions, i.e., nitrogen limitation. To improve poly(3-hydroxybutyric acid) (PHB) batch production by C. necator through model-guided bioprocessing or genetic engineering, insights into the dynamic effect of the fermentation conditions on cell metabolism are crucial. In this work, we have used dynamic flux balance analysis (DFBA), a constrained-based stoichiometric modelling approach, to study the metabolic change associated with PHB synthesis during batch cultivation. The model employs the ‘minimisation of all fluxes’ as cellular objectives and measured extracellular fluxes as additional constraints. The mass balance constraints are further adjusted based on thermodynamic considerations. The resultant flux distribution profiles characterise the evolution of metabolic states due to adaptation to dynamic extracellular conditions and provide further insights towards improvements that can be implemented to enhance PHB productivity.

PHA Production and PHA Synthases of the Halophilic Bacterium Halomonas sp. SF2003

Among the different tools which can be studied and managed to tailor-make polyhydroxyalkanoates (PHAs) and enhance their production, bacterial strain and carbon substrates are essential. The assimilation of carbon sources is dependent on bacterial strain’s metabolism and consequently cannot be dissociated. Both must wisely be studied and well selected to ensure the highest production yield of PHAs. Halomonas sp. SF2003 is a marine bacterium already identified as a PHA-producing strain and especially of poly-3-hydroxybutyrate (P-3HB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (P-3HB-co-3HV). Previous studies have identified different genes potentially involved in PHA production by Halomonas sp. SF2003, including two phaC genes with atypical characteristics, phaC1 and phaC2. At the same time, an interesting adaptability of the strain in front of various growth conditions was highlighted, making it a good candidate for biotechnological applications. To continue the characterization of Halomonas sp. SF2003, the screening of carbon substrates exploitable for PHA production was performed as well as production tests. Additionally, the functionality of both PHA synthases PhaC1 and PhaC2 was investigated, with an in silico study and the production of transformant strains, in order to confirm and to understand the role of each one on PHA production. The results of this study confirm the adaptability of the strain and its ability to exploit various carbon substrates, in pure or mixed form, for PHA production. Individual expression of PhaC1 and PhaC2 synthases in a non-PHA-producing strain, Cupriavidus necator H16 PHB¯4 (DSM 541), allows obtaining PHA production, demonstrating at the same time, functionality and differences between both PHA synthases. All the results of this study confirm the biotechnological interest in Halomonas sp. SF2003.

The Various Roles of Fatty Acids

Lipids comprise a large group of chemically heterogeneous compounds. The majority have fatty acids (FA) as part of their structure, making these compounds suitable tools to examine processes raging from cellular to macroscopic levels of organization. Among the multiple roles of FA, they have structural functions as constituents of phospholipids which are the "building blocks" of cell membranes; as part of neutral lipids FA serve as storage materials in cells; and FA derivatives are involved in cell signalling. Studies on FA and their metabolism are important in numerous research fields, including biology, bacteriology, ecology, human nutrition and health. Specific FA and their ratios in cellular membranes may be used as biomarkers to enable the identification of organisms, to study adaptation of bacterial cells to toxic compounds and environmental conditions and to disclose food web connections. In this review, we discuss the various roles of FA in prokaryotes and eukaryotes and highlight the application of FA analysis to elucidate ecological mechanisms. We briefly describe FA synthesis; analyse the role of FA as modulators of cell membrane properties and FA ability to store and supply energy to cells; and inspect the role of polyunsaturated FA (PUFA) and the suitability of using FA as biomarkers of organisms.

Application of flow cytometry for monitoring the production of poly(3-hydroxybutyrate) by Halomonas boliviensis

In this study, a flow cytometry (FC) protocol was implemented to measure poly(3-hydroxybutyrate) (PHB) content in a halophilic bacterium, to have a faster and easier control of the process. The halophilic bacterium Halomonas boliviensis was stained with BODIPY 493/503 and analyzed using FC. Bacterial polymer accumulation induced by two different nutrient limitations during the operation of a 2 L bioreactor was studied using traditional gas chromatography (GC) analysis and FC. The application of this rapid and straightforward method is useful to obtain complex and precise information about PHB accumulation that could be used for the monitoring, control and optimization of the production of PHB. A clear correlation between the PHB concentration determined by GC and the fluorescence signal obtained from stained bacteria by using FC was observed. Additionally, the heterogeneity of bacterial population as a function of PHB content was measured. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:276-284, 2017.

The MetaCyc database of metabolic pathways and enzymes and the BioCyc collection of Pathway/Genome Databases

The MetaCyc database (MetaCyc.org) is a comprehensive and freely accessible database describing metabolic pathways and enzymes from all domains of life. MetaCyc pathways are experimentally determined, mostly small-molecule metabolic pathways and are curated from the primary scientific literature. MetaCyc contains >2100 pathways derived from >37 000 publications, and is the largest curated collection of metabolic pathways currently available. BioCyc (BioCyc.org) is a collection of >3000 organism-specific Pathway/Genome Databases (PGDBs), each containing the full genome and predicted metabolic network of one organism, including metabolites, enzymes, reactions, metabolic pathways, predicted operons, transport systems and pathway-hole fillers. Additions to BioCyc over the past 2 years include YeastCyc, a PGDB for Saccharomyces cerevisiae, and 891 new genomes from the Human Microbiome Project. The BioCyc Web site offers a variety of tools for querying and analysis of PGDBs, including Omics Viewers and tools for comparative analysis. New developments include atom mappings in reactions, a new representation of glycan degradation pathways, improved compound structure display, better coverage of enzyme kinetic data, enhancements of the Web Groups functionality, improvements to the Omics viewers, a new representation of the Enzyme Commission system and, for the desktop version of the software, the ability to save display states.