Converting lignin derived phenolic aldehydes into microbial lipid by Trichosporon cutaneum

Coproduction of single cell protein and lipid from lignocellulose derived carbohydrates and inorganic ammonia salt with soluble ammonia recycling

Co-production of single cell protein (SCP) and lipid from lignocellulose-derived carbohydrates and inorganic ammonia offers a promising alternative for poultry or aquaculture feeds. An engineered oleaginous yeast Trichosporon cutaneum MP11 showed great potential for producing SCP and lipid from wheat straw and ammonia sulfate with minimum nutrient input. Trichosporon cutaneum MP11 showed stronger SCP and lipid fermentability using dry acid pretreated and biodetoxified wheat straw than using pure sugars. The residual ammonium sulfate in fermentation broth was recycled up to five times, resulting in ∼70% of nitrogen fixation into SCP. The overall yield of SCP and lipid from lignocellulose-derived sugars was 0.15 g/g and 0.11 g/g, respectively. This translates to the production of one ton of SCP (0.56 ton) and lipid (0.44 ton) from 6.6 tons of wheat straw, or one ton of SCP and lipid containing yeast cells (dry) from 4.8 tons of wheat straw.

Simultaneous and rate-coordinated conversion of lignocellulose derived glucose, xylose, arabinose, mannose, and galactose into D-lactic acid production facilitates D-lactide synthesis

D-lactide is the precursor of poly(D-lactide) (PDLA) or stereo-complex with poly(L-lactide) (PLLA). Lignocellulosic biomass provides the essential feedstock option to synthesize D-lactic acid and D-lactide. The residual sugars in D-lactic acid fermentation broth significantly blocks the D-lactide synthesis. This study showed a simultaneous and rate-coordinated conversion of lignocellulose derived glucose, xylose, arabinose, mannose, and galactose into D-lactic acid by adaptively evolved Pediococcus acidilactici ZY271 by simultaneous saccharification and co-fermentation (SSCF) of wheat straw. The produced D-lactic acid achieved minimum residual sugars (∼1.7 g/L), high chirality (∼99.1%) and high titer (∼128 g/L). A dry acid pretreatment eliminated the wastewater stream generation and the biodetoxification by fungus Amorphotheca resinae ZN1 removed the inhibitors from the pretreatment. The removal of the sugar residues and inhibitor impurities in D-lactic acid production from lignocellulose strongly facilitated the D-lactide synthesis. This study filled the gap in cellulosic D-lactide production from lignocellulose-derived D-lactic acid.

Valorization of Lignin and Its Derivatives Using Yeast

As the third most plentiful biopolymer after other lignocellulosic derivates such as cellulose and hemicellulose, lignin carries abundant potential as a substitute for petroleum-based products. However, the efficient, practical, value-added product valorization of lignin remains quite challenging. Although several studies have reviewed the valorization of lignin by microorganisms, this present review covers recent studies on the valorization of lignin by employing yeast to obtain products such as single-cell oils (SCOs), enzymes, and other chemical compounds. The use of yeasts has been found to be suitable for the biological conversion of lignin and might provide new insights for future research to develop a yeast strain for lignin to produce other valuable chemical compounds.

A review on contemporary approaches in enhancing the innate lipid content of yeast cell

For the past few decades, industrialization has made a huge environmental hazard to the world with its waste. The approach of waste to wealth in the recent era has made many Eco-economical suggestions for the industries. The valuable products in biorefinery aspects of the eco-economical suggestions include; energy products, high-value drugs and novel materials. Bio-lipids are found to be the major influencing eco-economical products in the process. Production of bio-lipid from microbial sources has paved the way for future research on lipid-bioproducts. The yeast cell is a unique organism with a large unicellular structure capable of accumulating a high amount of lipids. It constitutes 90% of neutral lipids. Various strategies enhance the lipid profile of yeast cells: usage of oleaginous yeast, usage of low cost (or) alternative substrates, developing stress conditions in the growth medium, using genetically modified yeast, altering metabolic pathways of yeast and by using the symbiotic cultures of yeast with other microbes. The metabolic alterations of lipid pathways such as lipid biosynthesis, lipid elongation, lipid accumulation and lipid degradation have been a striking feature of research in lipid-based microbial work. The lipid-bioproducts have also made a strong footprint in the history of alternative energy products. It includes partial acyl glycerol, oleochemicals, phospholipids and biofuels. This report comprises the recent approaches carried out in the yeast cell for enhancing its lipid content. The limitations, challenges and future scope of individual strategies were also highlighted in this article.

Cyclic L-lactide synthesis from lignocellulose biomass by biorefining with complete inhibitor removal and highly simultaneous sugars assimilation

Cyclic chiral lactide is the monomer chemical for polymerization of high molecular weight polylactic acid (PLA). The synthesis of cyclic L-lactide starts from poly-condensation of L-lactic acid to a low molecular weight pre-polymer and then depolymerized to cyclic L-lactide. Lignocellulose biomass is the most promising carbohydrate feedstock for lactic acid production, but the synthesis of cyclic L-lactide from L-lactic acid produced from lignocellulose has so far not been successful. The major barriers are the impurities of residual sugars and inhibitors in the crude cellulosic L-lactic acid product. Here we show a successful cyclic L-lactide synthesis from cellulosic L-lactic acid by lignocellulose biorefining with complete inhibitor removal and coordinated sugars assimilation. The removal of inhibitors from lignocellulose pretreatment was accomplished by biodetoxification using a unique fungus Amorphotheca resinae ZN1. The non-glucose sugars were completely and simultaneously assimilated at the same rate with glucose by the engineered L-lactic acid bacterium Pediococcus acidilactici. The L-lactic acid production from wheat straw was comparable to that from corn starch with high optical pure (99.6%), high L-lactic acid titer (129.4 g/L), minor residual total sugars (~2.2 g/L), and inhibitors free. The cyclic L-lactide was successfully synthesized from the regularly purified L-lactic acid and verified by detailed characterizations. This study paves the technical foundation of carbon neutral production of biodegradable PLA from lignocellulose biomass. This article is protected by copyright. All rights reserved.

Ultra-centrifugation force in adaptive evolution changes the cell structure of oleaginous yeast Trichosporon cutaneum into a favorable space for lipid accumulation

Microbial lipid production from lignocellulose biomass provides an essential option for sustainable and carbon neutral supply of future aviation fuels, biodiesel, as well as various food and nutrition products. Oleaginous yeast is the major microbial cell factory but its lipid producing performance is far below the requirements of industrial application. Here we show an ultra-centrifugation fractionation in adaptive evolution (UCF) of Trichosporon cutaneum based on the minor cell density difference. The lightest cells with the maximum intracellular lipid content were isolated by ultra-centrifugation fractionation in the long-term adaptive evolution. Significant changes occurred in the cell morphology with a fragile cell wall wrapping and enlarged intracellular space (two orders of magnitude increase in cell size). Complete and coordinate assimilations of all non-glucose sugars derived from lignocellulose were triggered and fluxed into lipid synthesis. Genome mutations and significant transcriptional regulations of the genes responsible for cell structure were identified and experimentally confirmed. The obtained Trichosporon cutaneum MP11 cells achieved a high lipid production of wheat straw, approximately five-folds greater than that of the parental cells. The study provided an effective method for screening the high lipid containing oleaginous yeast cells as well as the intracellular products accumulating cells in general. This article is protected by copyright. All rights reserved.

Microbial valorization of lignin: Prospects and challenges

Lignin is the world's second most prevalent biomaterial, but its effective value-added product valorization methods are still being developed. The most common preparation processes for converting lignin to platform chemicals and biofuels are fragmentation and depolymerization. Due to its structural diversity, fragmentation generally produces a variety of products, necessitating tedious separation and purifying methods to isolate the desired products. Bacterial-based techniques are commonly utilized for lignin fragmentation due to their high metabolitic activity. Recent advancements in lignin valorization utilizing bacteria, such as lignin decomposing microbes and major pathways involved that can breakdown lignin into various valuable products namely lipids, furfural, vanillin, polyhydroxybutyrate, poly lactic acid blends were discussed in this review. This review also covers the genetic and fermentation methodologies to enhance lignin decomposition, challenges and future trends of microbe based lignin valorization.

Engineering the Oleaginous Yeast Rhodosporidium toruloides for Improved Resistance Against Inhibitors in Biomass Hydrolysates

Conversion of lignocellulosic biomass into lipids and related chemicals has attracted much attention in the past two decades, and the oleaginous yeast Rhodosporidiumtoruloides has been widely used in this area. While R. toruloides species naturally have physiological advantages in terms of substrate utilization, lipid accumulation, and inhibitor resistance, reduced lipid production and cell growth are noticed when biomass hydrolysates are used as feedstocks. To improve the robustness of R. toruloides, here, we devised engineered strains by overexpressing genes responsible for phenolic compound degradation. Specifically, gene expression cassettes of the manganese peroxidase gene (MNP) and versatile peroxidase gene (VP) were constructed and integrated into the genome of R. toruloides NP11. A series of engineered strains were evaluated for lipid production in the presence of typical phenolic inhibitors. The results showed that R. toruloides strains with proper expression of MNP or VP indeed grew faster in the presence of vanillin and 5-hydroxymethylfurfural than the parental strain. When cultivated in concentrated mode biomass hydrolysates, the strain VP18 had improved performance as the cell mass and lipid content increased by 30% and 25%, respectively. This study provides more robust oleaginous yeast strains for microbial lipid production from lignocellulosic biomass, and similar efforts may be used to devise more advanced lipid producers.

Analytical Characterization and Inhibitor Detection in Liquid Phases Obtained After Steam Refining of Corn Stover and Maize Silage

The utilization of agricultural products and residues for the production of value-added and biobased products is a highly relevant topic in present research. Due to the natural recalcitrance of lignocellulosic biomass against enzymatic degradation, pretreatments are important requirement for further processes. For the raw material in this study, corn stover (CS) as highly available agricultural residue and maize silage (MS) as model substrate for an ensiled agricultural product were pretreated by steam refining. However, after processing a liquid fraction and fibers are present. Subsequent to steaming the fiber fraction is well characterized. Nonetheless, in depth characterizations of the filtrates are also important for their subsequent utilization. Decreasing molar masses from 7,900 g/mol to 1,100 g/mol for CS filtrates and 100.000–12.900 g/mol for MS filtrates were determined with increasing severity. Due to their proven inhibitory effect on microorganisms weak acids, furans and phenolic compounds within the liquid phased were analyzed. Especially formic acid increases with increasing severity from 0.27 to 1.20% based on raw material for CS and from 0.07 to 0.23% based on raw material for MS. Further GC/MS measurements indicate, that up to 8.25% (CS filtrate) and 5.23% (MS filtrates) of the total peak area is related to inhibitory phenols. Considering the data, detoxification strategies are of non-negligible importance for filtrates after steam refining and should be considered for further research and process or parameter optimizations. An alternative may be the application of milder process conditions in order to prevent the formation of inhibitory degradation products or the dilution of the gained filtrates.

Identifying carbohydrate-active enzymes of Cutaneotrichosporon oleaginosus using systems biology

Background

The oleaginous yeast Cutaneotrichosporon oleaginosus represents one of the most promising microbial platforms for resource-efficient and scalable lipid production, with the capacity to accept a wide range of carbohydrates encapsulated in complex biomass waste or lignocellulosic hydrolysates. Currently, data related to molecular aspects of the metabolic utilisation of oligomeric carbohydrates are sparse. In addition, comprehensive proteomic information for C. oleaginosus focusing on carbohydrate metabolism is not available.

Results

In this study, we conducted a systematic analysis of carbohydrate intake and utilisation by C. oleaginosus and investigated the influence of different di- and trisaccharide as carbon sources. Changes in the cellular growth and morphology could be observed, depending on the selected carbon source. The greatest changes in morphology were observed in media containing trehalose. A comprehensive proteomic analysis of secreted, cell wall-associated, and cytoplasmatic proteins was performed, which highlighted differences in the composition and quantity of secreted proteins, when grown on different disaccharides. Based on the proteomic data, we performed a relative quantitative analysis of the identified proteins (using glucose as the reference carbon source) and observed carbohydrate-specific protein distributions. When using cellobiose or lactose as the carbon source, we detected three- and five-fold higher diversity in terms of the respective hydrolases released. Furthermore, the analysis of the secreted enzymes enabled identification of the motif with the consensus sequence LALL[LA]L[LA][LA]AAAAAAA as a potential signal peptide.

Conclusions

Relative quantification of spectral intensities from crude proteomic datasets enabled the identification of new enzymes and provided new insights into protein secretion, as well as the molecular mechanisms of carbo-hydrolases involved in the cleavage of the selected carbon oligomers. These insights can help unlock new substrate sources for C. oleaginosus, such as low-cost by-products containing difficult to utilize carbohydrates. In addition, information regarding the carbo-hydrolytic potential of C. oleaginosus facilitates a more precise engineering approach when using targeted genetic approaches. This information could be used to find new and more cost-effective carbon sources for microbial lipid production by the oleaginous yeast C. oleaginosus.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01692-2.

Tolerance of Trichosporon cutaneum to lignin derived phenolic aldehydes facilitate the cell growth and cellulosic lipid accumulation

Phenolic aldehydes are the major inhibitors from lignocellulose pretreatment. Previous studies show that oleaginous yeasts are difficult to survive in lignocellulosic hydrolysates even after the removal of furan aldehydes and organic acids inhibitors. This study investigated the cell viability, sugar consumption and lipid accumulation of the major oleaginous yeasts including Trichosporon cutaneum, Rhodosporidium toruloides, Rhodotorula glutinis, Yarrowia lipolytica in wheat straw hydrolysate containing only phenolic aldehydes after furan aldehydes and organic acids were selectively degraded by microorganisms. The results confirmed that the existence of residual phenolic aldehydes was the major reason for poor cell growth and metabolism of oleaginous yeasts. Only T. cutaneum demonstrated the higher tolerance by biodegrading phenolic aldehydes and the satisfactory cell growth and lipid production were obtained. This study revealed that T. cutaneum might be one of the promising cell factories for microbial lipid production from lignocellulosic feedstock.

Microbial lipid fermentation of Trichosporon cutaneum in high saline water

Fermentative production of microbial lipid requires high fresh water input. The utilization of high saline seawater or industrial wastewater is an important alternative to reduce the freshwater consumption. This study revealed that oleaginous yeast Trichosporon cutaneum was tolerant to a high salinity up to 130 g/L of NaCl after long-term adaptive evolution. Lipid fermentation of T. cutaneum in seawater achieved the lipid production of 31.7 g/L with approximately 36% greater than that in freshwater. The saline water containing phenol was also tested for lipid fermentation and 23.6 g/L of lipid was produced simultaneously with the complete biodegradation of phenol. An interesting phenomenon was also observed that the yeast cells spontaneously segregated onto the upper surface of the saline water. This study extended the lipid fermentation options with practical application potentials.

Microbial lipid biosynthesis from lignocellulosic biomass pyrolysis products

Lipids are a biorefinery platform to prepare fuel, food and health products. They are traditionally obtained from plants, but those of microbial origin allow for a better use of land and C resources, among other benefits. Several (thermo)chemical and biochemical strategies are used for the conversion of C contained in lignocellulosic biomass into lipids. In particular, pyrolysis can process virtually any biomass and is easy to scale up. Products offer cost-effective, renewable C in the form of readily fermentable molecules and other upgradable intermediates. Although the production of microbial lipids has been studied for 30 years, their incorporation into biorefineries was only described a few years ago. As pyrolysis becomes a profitable technology to depolymerize lignocellulosic biomass into assimilable C, the number of investigations on it raises significantly. This article describes the challenges and opportunities resulting from the combination of lignocellulosic biomass pyrolysis and lipid biosynthesis with oleaginous microorganisms. First, this work presents the basics of the individual processes, and then it shows state-of-the-art processes for the preparation of microbial lipids from biomass pyrolysis products. Advanced knowledge on separation techniques, structure analysis, and fermentability is detailed for each biomass pyrolysis fraction. Finally, the microbial fatty acid platform comprising biofuel, human food and animal feed products, and others, is presented. Literature shows that the microbial lipid production from anhydrosugars, like levoglucosan, and short-chain organic acids, like acetic acid, is straightforward. Indeed, processes achieving nearly theoretical yields form the latter have been described. Some authors have shown that lipid biosynthesis from different lignin sources is biochemically feasible. However, it still imposes major challenges regarding strain performance. No report on the fermentation of pyrolytic lignin is yet available. Research on the microbial uptake of pyrolytic humins remains vacant. Microorganisms that make use of methane show promising results at the proof-of-concept level. Overall, despite some issues need to be tackled, it is now possible to conceive new versatile biorefinery models by combining lignocellulosic biomass pyrolysis products and robust oleaginous microbial cell factories.

Microbial lipid production from banana straw hydrolysate and ethanol stillage

In this study, the feasibility of banana straw (BS) hydrolysate as carbon source and reutilizing the pretreated liquor (PL) of BS in the Rhodosporidium toruloides fermentation was explored for the first time. When BS hydrolysate was used as the carbon source, total biomass concentration, lipid concentration, and lipid content under optimal conditions reached 15.52 g/L, 5.83 g/L, and 37.56% (w/w), respectively, which was similar to the results of pure sugar control. After detoxification, 50% PL can be returned to enzymatic hydrolysis and fermentation, and total biomass concentration, lipid concentration, and lipid content can reach 15.14 g/L, 5.59 g/L, and 36.91% (w/w). Then, ethanol stillage (ES) was used as the nitrogen source. The NaCl and glycerol of ES could promote lipid accumulation, reaching 7.52 g/L under optimized conditions. Finally, microbial lipid production from BS hydrolysate and ES without any additional nutrients was investigated, and the maximum total biomass concentration, lipid concentration, and lipid content were 13.55 g/L, 4.88 g/L, and 36.01% (w/w), respectively. Besides, the main compositions of microbial lipid produced were C16 and C18, and the biodiesel production from the microbial lipid could meet Chinese and US standard through theoretical numerical calculation.

Lipid production by oleaginous yeasts

Microbial lipid production has been studied extensively for years; however, lipid metabolic engineering in many of the extraordinarily high lipid-accumulating yeasts was impeded by inadequate understanding of the metabolic pathways including regulatory mechanisms defining their oleaginicity and the limited genetic tools available. The aim of this review is to highlight the prominent oleaginous yeast genera, emphasizing their oleaginous characteristics, in conjunction with diverse other features such as cheap carbon source utilization, withstanding the effect of inhibitory compounds, commercially favorable fatty acid composition-all supporting their future development as economically viable lipid feedstock. The unique aspects of metabolism attributing to their oleaginicity are accentuated in the pretext of outlining the various strategies successfully implemented to improve the production of lipid and lipid-derived metabolites. A large number of in silico data generated on the lipid accumulation in certain oleaginous yeasts have been carefully curated, as suggestive evidences in line with the exceptional oleaginicity of these organisms. The different genetic elements developed in these yeasts to execute such strategies have been scrupulously inspected, underlining the major types of newly-found and synthetically constructed promoters, transcription terminators, and selection markers. Additionally, there is a plethora of advanced genetic toolboxes and techniques described, which have been successfully used in oleaginous yeasts in the recent years, promoting homologous recombination, genome editing, DNA assembly, and transformation at remarkable efficiencies. They can accelerate and effectively guide the rational designing of system-wide metabolic engineering approaches pinpointing the key targets for developing industrially suitable yeast strains.

Depolymerization and conversion of lignin to value-added bioproducts by microbial and enzymatic catalysis

Lignin, the most abundant renewable aromatic compound in nature, is an excellent feedstock for value-added bioproducts manufacturing; while the intrinsic heterogeneity and recalcitrance of which hindered the efficient lignin biorefinery and utilization. Compared with chemical processing, bioprocessing with microbial and enzymatic catalysis is a clean and efficient method for lignin depolymerization and conversion. Generally, lignin bioprocessing involves lignin decomposition to lignin-based aromatics via extracellular microbial enzymes and further converted to value-added bioproducts through microbial metabolism. In the review, the most recent advances in degradation and conversion of lignin to value-added bioproducts catalyzed by microbes and enzymes were summarized. The lignin-degrading microorganisms of white-rot fungi, brown-rot fungi, soft-rot fungi, and bacteria under aerobic and anaerobic conditions were comparatively analyzed. The catalytic metabolism of the microbial lignin-degrading enzymes of laccase, lignin peroxidase, manganese peroxidase, biphenyl bond cleavage enzyme, versatile peroxidase, and β-etherize was discussed. The microbial metabolic process of H-lignin, G-lignin, S-lignin based derivatives, protocatechuic acid, and catechol was reviewed. Lignin was depolymerized to lignin-derived aromatic compounds by the secreted enzymes of fungi and bacteria, and the aromatics were converted to value-added compounds through microbial catalysis and metabolic engineering. The review also proposes new insights for future work to overcome the recalcitrance of lignin and convert it to value-added bioproducts by microbial and enzymatic catalysis.

2G waste lignin to fuel and high value-added chemicals: Approaches, challenges and future outlook for sustainable development

Lignin is produced as a byproduct in cellulosic biorefinery as well in pulp and paper industries and has the potential for the synthesis of a variety of phenolics chemicals, biodegradable polymers, and high value-added chemicals surrogate to conventional petro-based fuels. Therefore, in this critical review, we emphasize the possible scenario for lignin isolation, transformation into value addition chemicals/materials for the economic viability of current biorefineries. Additionally, this review covers the chemical structure of lignocellulosic biomass/lignin, worldwide availability of lignin and describe various thermochemical (homogeneous/heterogeneous base/acid-catalyzed depolymerization, oxidative, hydrogenolysis etc.) and biotechnological developments for the production of bio-based low molecular weight phenolics, i.e. polyhydroxyalkanoates, vanillin, adipic acid, lipids etc. Besides, some functional chemicals applications, lignin-formaldehyde ion exchange resin, electrochemical and production of few targeted chemicals are also elaborated. Finally, we examine the challenges, opportunities and prospects way forward related to lignin valorization.

Characterization of two sugar transporters responsible for efficient xylose uptake in an oleaginous yeast Candida tropicalis SY005

Microbial conversion of lignocellulosic feedstock to the target bioproduct requires efficient assimilation of its constituent sugars, a large part of which comprises of glucose and xylose. This study aims to identify and characterize sugar transporters capable of xylose uptake in an oleaginous strain of the industrially relevant yeast Candida tropicalis. In silico database mining resulted in two sugar transporter proteins- CtStp1 and CtStp2, containing conserved amino acid residues and motifs that have been previously reported to be involved in xylose transport in other organisms. Several softwares predicted the likelihood of 10-12 transmembrane (TM) helices to be present in both the Stps, while molecular modelling showed 12 TM helices that were organized into a typical structure found in the major facilitator superfamily of transporters. Docking with different sugars also predicted favorable interactions. Heterologous expression in a Saccharomyces cerevisiae strain harboring functional xylose metabolic genes validated the broad substrate specificity of the two Stps. Each transporter supported prominent growth of recombinant S. cerevisiae strains on six sugars including xylose at various concentrations. Expression of CtSTP1 and CtSTP2 along with the xylose metabolic genes in yeast transformants grown in presence of xylose was confirmed by transcript detection. Growth curve and sugar consumption profiles revealed uptake of both glucose and xylose simultaneously by the recombinant yeast strains, though CtStp1 showed relatively less effect of glucose repression in mixed sugars and was a better transporter of xylose than CtStp2. Such glucose-xylose utilizing efficient transporters can be effective tools for developing co-fermenting yeasts through genetic engineering in future, with noteworthy applications in renewable biomass utilization.

Detoxification impact of Trichosporon cutaneum in saline condition for efficient reduction of phenol co-contaminated with cadmium

Treatment strategies applied for co-contaminated environments may not work due to a mixture of organic and inorganic contaminants. Here, we study the efficiency of simultaneous phenol and cadmium removal by Trichosporon cutaneum in saline condition. Initially, phenol degradation and cadmium removal were analyzed separately. The results showed the high potential of T. cutaneum for phenol degradation and almost all the phenol (1250 mg/L) was degraded in the presence of 5% NaCl. Cadmium removal by T. cutaneum indicated a direct relation to NaCl concentration. Increasing salt concentration from 0 to 5% caused an increase in cadmium adsorption from 57.3 to 80.2%. In the simultaneous remediation of phenol and cadmium, T. cutaneum showed a delay in the growth curve and phenol degradation, probably because of toxicity effect of cadmium, but at the end of a week, almost the same amount of phenol was removed (> 99% in 1250 mg/L phenol). T. cutaneum showed good efficiency in cadmium removal in simultaneous remediation and removed 90, 89, and 75% of cadmium in the existence of 5% NaCl in 750, 1000, and 1250 mg/L initial concentration of phenol, respectively. Our findings support the high activity of T. cutaneum in the bioremediation of polluted saline areas that phenol coexists with cadmium.

Harnessing the Power of Enzymes for Tailoring and Valorizing Lignin

Lignin, a structural component of lignocellulosic plants, is an alternative raw material with enormous potential to replace diminishing fossil-based resources for the sustainable production of many chemicals and materials. Unfortunately, lignin's heterogeneity, low reactivity, and strong intra- and intermolecular hydrogen interactions and modifications introduced during the pulping process present significant technical challenges. However, the increasing ability to tailor lignin biosynthesis pathways by targeting enzymes and the continued discovery of more robust biocatalysts are enabling the synthesis of novel valuable products. This review summarizes how enzymes involved in lignin biosynthesis pathways and microbial enzymes are being harnessed to produce chemicals and materials and to upgrade lignin properties for the synthesis of a variety of value-added lignin industrial products.

Identification of oleaginous yeasts that metabolize aromatic compounds

The valorization of lignin is critical for the economic viability of the bioeconomy. Microbial metabolism is advantageous for handling the myriad of aromatic compounds resulting from lignin chemical or enzymatic depolymerization. Coupling aromatic metabolism to fatty acid biosynthesis makes possible the production of biofuels, oleochemicals, and other fine/bulk chemicals derived from lignin. Our previous work identified Cutaneotrichosporon oleaginosus as a yeast that could accumulate nearly 70% of its dry cell weight as lipids using aromatics as a sole carbon source. Expanding on this, other oleaginous yeast species were investigated for the metabolism of lignin-relevant monoaromatics. Thirty-six oleaginous yeast species from the Phaff yeast collection were screened for growth on several aromatic compounds representing S-, G-, and H- type lignin. The analysis reported in this study suggests that aromatic metabolism is largely segregated to the Cutaenotrichosporon, Trichosporon, and Rhodotorula clades. Each species tested within each clade has different properties with respect to the aromatics metabolized and the concentrations of aromatics tolerated. The combined analysis suggests that Cutaneotrichosporon yeast are the best suited to broad spectrum aromatic metabolism and support its development as a model system for aromatic metabolism in yeast.

Recent advancement in lignin biorefinery: With special focus on enzymatic degradation and valorization

With the intensive development of lignocellulosic biorefineries to produce fuels and chemicals from biomass-derived carbohydrates, lignin was generated at a large quantity every year. Therefore, lignin has received increasing attention as an abundant aromatics resource in terms of research and development efforts for value-added chemicals production. In this review, studies about lignin degradation especially the crucial enzymes involved and the reaction mechanism were substantially discussed, which provided the molecular basis of lignin biodegradation. Then, the latest improvements in lignin valorization by biological methods were summarized and case studies about value-added compounds from lignin were introduced. Afterwards, challenges, opportunities and prospects regarding biorefinery of lignin were presented.

Biotransformation of lignin: Mechanisms, applications and future work

As one of the most abundant polymers in biosphere, lignin has attracted extensive attention as a kind of promising feedstock for biofuel and bio-based products. However, the utilization of lignin presents various challenges in that its complex composition and structure and high resistance to degradation. Lignin conversion through biological platform harnesses the catalytic power of microorganisms to decompose complex lignin molecules and obtain value-added products through biosynthesis. Given the heterogeneity of lignin, various microbial metabolic pathways are involved in lignin bioconversion processes, which has been characterized in extensive research work. With different types of lignin substrates (e.g., model compounds, technical lignin, and lignocellulosic biomass), several bacterial and fungal species have been proved to own lignin-degrading abilities and accumulate microbial products (e.g., lipid and polyhydroxyalkanoates), while the lignin conversion efficiencies are still relatively low. Genetic and metabolic strategies have been developed to enhance lignin biodegradation by reprogramming microbial metabolism, and diverse products, such as vanillin and dicarboxylic acids were also produced from lignin. This article aims at presenting a comprehensive review on lignin bioconversion including lignin degradation mechanisms, metabolic pathways, and applications for the production of value-added bioproducts. Advanced techniques on genetic and metabolic engineering are also covered in the recent development of biological platforms for lignin utilization. To conclude this article, the existing challenges for efficient lignin bioprocessing are analyzed and possible directions for future work are proposed.

Physiological characterization and sequence analysis of a syringate-consuming Actinobacterium

Hardwood lignin is made of up to 75% syringyl-units and the bioconversion of syringate and syringaldehyde is therefore of considerable interest for biological valorization of lignin. In the current study, we have isolated a syringate-consuming bacterium identified as Microbacterium sp. RG1 and characterized its growth on several lignin model compounds. Growth was observed on syringate, 3-O-methylgallate, vanillate, 4-hydroxybenzoate, ferulate and p-coumarate. Toxic aromatic aldehydes such as vanillin and syringaldehyde were converted to their respective alcohols/acids which were eventually consumed with a maximum specific uptake rate of 0.02 and 0.1 mmol (g_CDW h)^-1 respectively. The isolate was further subjected to whole genome sequencing and putative genes related to the metabolism of syringyl-compounds were mapped for the first time in a Gram-positive bacterium. These findings will be of high significance when designing future host microorganisms and bioprocesses for the efficient valorization of pre-treated lignin feedstocks.