A novel efficient Au–Ag alloy catalyst system: preparation, activity, and characterization

Effect of a Novel sputtering process on the chemical and biological properties of silver-gold alloys

Silver-gold nanocrystalline films were sputtered on HDPE substrates by a physical vapour deposition process using alloys with a nominal composition of 65% silver/35% gold or 35% silver/65% gold by weight, with comparison to a 100% silver target. Novel process conditions were introduced to include both water and oxygen as reactive gases. X-ray diffraction and chemical digests were used to assess the structure and chemical composition of the films. Log reductions and corrected zone of inhibition tests were used to measure the biological properties. Despite a range of physical and chemical properties, biological tests showed that the bactericidal properties of all silver-gold films were comparable with silver-only films in the short term and 65% silver films made with Novel sputtering conditions had comparable bacteriostatic abilities to silver-only over a 7-day period. The benefit of including gold may be seen in future studies of anti-inflammatory activity.

Silver oxide nanostructures as a new trend to control strawberry charcoal rot induced by Macrophomina phaseolina

BACKGROUND

Silver oxide (Ag₂ O) nanostructures were fabricated and their ability to induce antifungal activity against Macrophomina phaseolina, which causes charcoal rot disease in strawberries, was evaluated under laboratory, greenhouse and field conditions. A real-time quantitative polymerase chain reaction was used to monitor expression of defense-related genes, which is essential to evaluate the potential of the manufactured nanoparticles to promote strawberry resistance against charcoal rot. The effect of Ag₂ O nanoparticles on growth characteristics in strawberry plants was also studied.

RESULTS

The results showed that Ag₂ O significantly inhibited M. phaseolina growth compared with untreated controls under in vitro conditions. Strawberry plants treated with Ag₂ O showed a significant decrease in the severity of charcoal rot disease in the greenhouse compared with untreated plants. Strawberry plants treated with Ag₂ O nanoparticles expressed defense gene (PR-1) involved in the salicylic acid signaling pathways at levels three to five times higher than in the control group. Ag₂ O nanoparticles significantly improved the growth and yield of the strawberry crop.

CONCLUSION

Use of Ag₂ O nanoparticles can be considered a new strategy to control M. phaseolina and this is the first report of this effect. © 2022 Society of Chemical Industry.

AuAg Nanoparticles Grafted on TiO2@N-Doped Porous Carbon: Improved Depletion of Ciprofloxacin under Visible Light through Plasmonic Photocatalysis

TiO2 nanoparticles (NPs) were modified to obtain photocatalysts with different composition sophistication and displaying improved visible light activity. All of them were evaluated in the photodegradation of ciprofloxacin. The band gap of TiO2 NPs was successfully tailored by the formation of an N-doped porous carbon (NPC)-TiO2 nanohybrid through the pyrolysis of melamine at 600 °C, leading to a slight red-shift of the absorption band edge for nanohybrid NPC-TiO2 1. In addition, the in-situ formation and grafting of plasmonic AuAg NPs at the surface of NPC sheets and in close contact with TiO2 NPs leads to AuAg-NPC-TiO2 nanohybrids 2−3. These nanohybrids showed superior photocatalytic performance for the degradation of ciprofloxacin under visible light irradiation, compared to pristine P25 TiO2 NPs or to AuAg-PVP-TiO2 nanohybrid 4 in which polyvinylpyrrolidone stabilized AuAg NPs were directly grafted to TiO2 NPs. The materials were characterized by transmission electron microscope (TEM), High Angle Annular Dark Field—Scanning Transmission Electron Microscopy—Energy Dispersive X-ray Spectroscopy HAADF-STEM-EDS, X-ray photoelectron spectroscopy and solid UV-vis spectroscopy. Moreover, the active species involved in the photodegradation of ciprofloxacin using AuAg-NCS-TiO2 nanohybrids were evaluated by trapping experiments to propose a mechanism for the degradation.

Frustrated Lewis Pairs in Heterogeneous Catalysis: Theoretical Insights

Frustrated Lewis pair (FLP) catalysts have attracted much recent interest because of their exceptional ability to activate small molecules in homogeneous catalysis. In the past ten years, this unique catalysis concept has been extended to heterogeneous catalysis, with much success. Herein, we review the recent theoretical advances in understanding FLP-based heterogeneous catalysis in several applications, including metal oxides, functionalized surfaces, and two-dimensional materials. A better understanding of the details of the catalytic mechanism can help in the experimental design of novel heterogeneous FLP catalysts.

Mapping the effects of physical and chemical reduction parameters on local atomic distributions within bimetallic nanoparticles

Bimetallic nanoparticles prove advantageous over their monometallic counterparts due to the tunable, hybrid properties that result from combining different atomic species in a controlled way. The favorable optical and catalytic properties resulting from AgAu nanoparticle formation have been widely attributed to the existence of Ag-Au bonds, the maximization of which assumes the formation of a homogeneous alloy. Despite the importance of atomic scale structure in these systems, synthetic studies are typically not paired with structural characterization at the atomic scale. Herein, a comprehensive synthetic exploration of physical and chemical reduction parameters of resulting nanoparticle products is complemented with thorough X-ray characterization to probe how these parameters affect atomic scale alloy distributions within AgAu nanoparticles. Presented evidence shows Ag is substantially underincorporated into nanoparticle constructs compared with solution Ag : Au ratios regardless of precursor : reductant ratio or volume of reductant added. Both Ag and Au exhibit significant local clustering, with Ag distributed preferentially towards the nanoparticle surface. Most significantly, the results of this investigation suggest that reduction parameters alone can affect the local alloy distributions and homogeneity within bimetallic nanoparticles, even when the ratio of metallic precursors remains constant. Overall, this investigation presents the ability to control alloy distributions using kinetics and provides new considerations for optimizing synthetic methods to produce functional bimetallic nanoparticles.

In situ reduction of Ag on magnetic nanoparticles with gallic acid: effect of the synthesis parameters on morphology

Aim: Synthesis of Fe₃O₄-Ag composite nanoparticles (NPs) by a new in situ reduction of Ag NPs on the surface of Fe₃O₄ NPs using gallic acid as a reducing agent. Materials & methods: The influence of process parameters on NP morphology and functionalization was evaluated by means of field-emission scanning/scanning transmission electron microscopy and Fourier-transform IR spectroscopy. Results & conclusion: The synthesis conditions affected the morphology of the obtained NPs, evidence of the formation of polydispersed aggregates, nanoflower-like or nanodumbbell nanocomposites. In particular, well-defined nanodumbbells were obtained in aqueous media, with an NP/gallic acid ratio of 10:1, while the presence of a silica shell did not improve the morphology of Ag NPs nucleated on the Fe₃O₄ core.

Dilute Alloys Based on Au, Ag, or Cu for Efficient Catalysis: From Synthesis to Active Sites

The development of new catalyst materials for energy-efficient chemical synthesis is critical as over 80% of industrial processes rely on catalysts, with many of the most energy-intensive processes specifically using heterogeneous catalysis. Catalytic performance is a complex interplay of phenomena involving temperature, pressure, gas composition, surface composition, and structure over multiple length and time scales. In response to this complexity, the integrated approach to heterogeneous dilute alloy catalysis reviewed here brings together materials synthesis, mechanistic surface chemistry, reaction kinetics, in situ and operando characterization, and theoretical calculations in a coordinated effort to develop design principles to predict and improve catalytic selectivity. Dilute alloy catalysts─in which isolated atoms or small ensembles of the minority metal on the host metal lead to enhanced reactivity while retaining selectivity─are particularly promising as selective catalysts. Several dilute alloy materials using Au, Ag, and Cu as the majority host element, including more recently introduced support-free nanoporous metals and oxide-supported nanoparticle "raspberry colloid templated (RCT)" materials, are reviewed for selective oxidation and hydrogenation reactions. Progress in understanding how such dilute alloy catalysts can be used to enhance selectivity of key synthetic reactions is reviewed, including quantitative scaling from model studies to catalytic conditions. The dynamic evolution of catalyst structure and composition studied in surface science and catalytic conditions and their relationship to catalytic function are also discussed, followed by advanced characterization and theoretical modeling that have been developed to determine the distribution of minority metal atoms at or near the surface. The integrated approach demonstrates the success of bridging the divide between fundamental knowledge and design of catalytic processes in complex catalytic systems, which can accelerate the development of new and efficient catalytic processes.

Bimetallic Gold-Silver Nanostructures Drive Low Overpotentials for Electrochemical Carbon Dioxide Reduction

Alloy formation is an advanced approach to improve desired properties that the monoelements cannot achieve. Alloys are usually designed to tailor intrinsic natures or induce synergistic effects by combining materials with distinct properties. Indeed, unprecedented properties have emerged in many cases, superior to a simple sum of pure elements. Here, we present Au-Ag alloy nanostructures with prominent catalytic properties in an electrochemical carbon dioxide reduction reaction (eCO₂RR). The Au-Ag hollow nanocubes are prepared by galvanic replacement of Au on Ag nanocubes. When the Au-to-Ag ratio is 1:1 (Au₁Ag₁), the alloy hollow nanocubes exhibit maximum Faradaic efficiencies of CO production in a wide potential range and high mass activity and CO current density superior to those of the bare metals. In particular, overpotentials are estimated to be similar to or lower than that of the Au catalyst under various standard metrics. Density functional theory calculations, machine learning, and a statistical consideration demonstrate that the optimal configuration of the *COOH intermediate is a bidentate coordination structure where C binds to Au and O binds to Ag. This active Au-Ag neighboring configuration has a maximum population and enhanced intrinsic catalytic activity on the Au₁Ag₁ surface among other Au-to-Ag compositions, in good agreement with the experimental results. Further application of Au₁Ag₁ to a membrane electrode assembly cell at neutral conditions shows enhanced CO Faradaic efficiency and current densities compared to Au or Ag nanocubes, indicating the possible extension of Au-Ag alloys to larger electrochemical systems. These results give a new insight into the synergistic roles of Au and Ag in the eCO₂RR and offer a fresh direction toward a rational design of bimetallic catalysts at a practical scale.

Chemical ordering and temperature effects on the thermal conductivity of Ag–Au and Ag–Pd bimetallic bulk and nanocluster systems

Understanding the heat transfer mechanisms in bimetallic nanoparticles, e.g. to promote heat transfer in a nanofluid, is a significant problem for industrial and fluid mechanics related applications.

Recent Advances in the Applications of Mesoporous Silica in Heterogenous Catalysis

Mesoporous silica is a class of silica material with a large specific surface area, high specific pore volume and meso-sized pores. These properties make mesoporous silica a good choice of...

Exploring the Effects of a Doping Silver Atom on Anionic Gold Clusters' Reactivity with O2

Reactivities of AgAu_n-1^- (n = 3-10) with O₂ at a low temperature were studied using an instrument combining a magnetron sputter cluster source, a microflow reactor, and a time-of-flight mass spectrometer. Their reaction products as well as size-dependent kinetic rates were nearly identical to those of corresponding Au_n^- (n = 3-10). Previous experiments showed that the Ag atom in AgAu_n-1^- (n = 3-10) was fully or partially enclosed by the gold atoms. We studied the adsorption of O₂ on these reported structures using the B3LYP theory with relatively large basis sets. The theoretical results indicate that the adsorption sites as well as the adsorption energies of O₂ on AgAu_n-1^- (n = 3-10) are nearly identical to those on the corresponding Au_n^- (n = 3-10). The O₂ adsorption on a series of proposed isomers of AgAu_n-1^- (denoted as Au_n-1Ag^-), in which the silver atom was on the protruding site, was explored using the same theoretical methods. The O₂ tends to bond with the protruding Ag atoms, and the binding energies are apparently higher than those on the corresponding Au_n^- and AgAu_n-1^-. The adsorption and activation of O₂ on Au_n^-, AgAu_n-1^-, and Au_n-1Ag^- were correlated with their global electron detachment energies (VDEs) as well as the element types of the adsorption sites. Generally, low VDE values and silver sites facilitate the O₂ adsorption, and these two factors separately dominate in various cluster species. The revealed effects of a doping silver atom in small gold clusters are helpful to understand the role of the residual silver components in many nano gold catalysts.

Effect of the Metal Deposition Order on Structural, Electronic and Catalytic Properties of TiO2-Supported Bimetallic Au-Ag Catalysts in 1-Octanol Selective Oxidation

Au and Ag were deposited on TiO2 modified with Ce, La, Fe or Mg in order to obtain bimetallic catalysts to be used for liquid-phase oxidation of 1-octanol. The effects of the deposition order of gold and silver, and the nature of the support modifying additives and redox pretreatments on the catalytic properties of the bimetallic Au-Ag catalysts were studied. Catalysts were characterized by low-temperature nitrogen adsorption–desorption, energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy. It was found that pretreatments with hydrogen and oxygen at 300 °C significantly decreased the activity of AuAg catalysts (silver was deposited first) and had little effect on the catalytic properties of AgAu samples (gold was deposited first). The density functional theory method demonstrated that the adsorption energy of 1-octanol increased for all positively charged AuxAgyq (x + y = 10, with a charge of q = 0 or +1) clusters compared with the neutral counterparts. Lanthanum oxide was a very effective promoter for both monometallic and bimetallic gold and silver catalysts in the studied process.

TiO2-supported Au-Ag plasmonic nanocatalysts achieved by plasma restructuring and activation

Plasmonic Au-Ag/TiO₂ bimetallic nanocatalyst is regarded as a promising visible-light (VL) photocatalyst due to its wide light absorption and potentially enhanced activity. For its preparation, Au precursors usually contain Cl and co-impregnation/co-deposition suffers from AgCl precipitation, and consequently Au and Ag have to be sequentially supported. However, Au and Ag species of the sequential preparation are individually isolated and difficult to be homogeneously mixed. Here we report an Au-Ag plasmonic nanocatalyst achieved by plasma restructuring and activation from the sequential preparation. The isolated cationic Au and Ag species on the sequentially-prepared Au-Ag/TiO₂ sample are restructured to be homogeneously mixed and highly activated by O₂ plasma, which can be partially auto-reduced to Au-Ag bimetallic nanoparticles within the induction period of a few minutes in VL photocatalytic oxidation of CO. The Au-Ag plasmonic nanocatalyst exhibits a strongly enhanced activity in the VL photocatalytic reaction. The contribution of O₂ plasma treatment and the enhancement mechanism for the Au-Ag plasmonic nanocatalyst are disclosed.

X-ray Photoelectron Spectra of Ag-Au Colloidal Nanoparticles after Interaction with Linear Carbon Chains

The results of X-ray photoelectron spectra (XPS) characterization of the surface of Ag-Au colloidal nanoparticles (Ag-Au NPs), prepared by laser ablation in water before and after interaction with linear carbon chains (LCC), are presented. No additional features appear in high-energy resolved XPS core level spectra of Ag-Au NPs which indicates that surface is not oxidized. The measurements of XPS Ag 3d-spectrum of (Ag-Au)@LCC manifests the additional low-energy structure that is associated with the formation of Ag–C bonds. The charge transfer between Au atoms on the NPs surface and LCC was established. Additionally, some oxidation of the Ag atoms on the surface of (Ag-Au)@LCC is observed which arises during laser ablation in water. We assume that oxidative species will preferably interact with the areas outside the LCC instead of oxidizing the carbon chains which was confirmed by XPS C 1s spectra.

Recent progress on removal of indoor air pollutants by catalytic oxidation

Indoor air pollutant is a serious problem due to its wide diversity and variability. The harmful substances from construction materials and decorative materials may make the indoor air pollution become more and more serious and cause serious health problems. In this paper, the review summarizes the advanced technologies for the removal of indoor air pollutants and the development in the treatment of indoor air pollution by catalytic oxidation technologies. Meanwhile, some catalytic oxidation mechanisms of indoor air pollutants are proposed in detail, and suggestions for the indoor air pollution treatment are also presented, in order to provide some reference for subsequent research.

The Use of Tunable Optical Absorption Plasmonic Au and Ag Decorated TiO2 Structures as Efficient Visible Light Photocatalysts

Exploring solar-excited heterogeneous photocatalysts by taking advantage of surface plasmon resonance (SPR) has drawn growing research attention. As it could help to pave the way for global sustainable development. The decoration of TiO2 particles with noble metals possessing SPR effects is regarded as one of the most effective solutions. The perfect match of the SPR absorption band with the spectrum of incident light is an essential factor for plasmonic enhancement. However, modifying with sole noble metal is often limited as it tunes wavelength of only several nanometers. To overcome this drawback, an alternative approach can be offered by decoration with more than one noble metal. For instance, Au-Ag co-decoration displays greatly adjustable, composition-dependent SPR agent over a broad range of the visible light spectrum (ca. from 415 to 525 nm). Hence Au-Ag complex is a remarkable candidate for tuning the photo adsorption of TiO2 from UV to visible light. This study presents a novel and tailored method for the fabrication of Au-Ag co-modified TiO2 particles, and how Au-Ag dependent SPR was applied as the visible light-responsive TiO2 based photocatalysts in a simple but reliable way. The fabricated Au-Ag co-decorated TiO2 (AuxAg(1−x)/TiO2) was characterized and proved to own excellent stability and large specific surface area. The optimization of these particles against the wavelength of maximal solar light intensity was confirmed by photo degradation of methylene blue under visible light radiation. This work may provide further insight into the design of TiO2-based composites with improved photocatalytic properties for environmental remediation and renewable energy utilization.

Fabrication of nanohybrids assisted by protein-based materials for catalytic applications

Protein units and architectures were applied as supports in the synthesis of metal and metal oxide nanoparticles for environmentally benign catalytic applications.

Bimetallic coatings synergistically enhance the speeds of photocatalytic TiO2 micromotors

A bimetallic cap containing sputtered silver is a better catalyst that significantly improves the performance of catalytically powered micromotors.

Ultrasmall Silver Clusters Stabilized on MgO for Robust Oxygen-Promoted Hydrogen Production from Formaldehyde Reforming

Efficient molecular hydrogen generation from renewable biomass-derived resources and water is of great importance to the sustainable development of the future society. Herein, ultrasmall Ag nanoclusters supported on a defect-rich MgO matrix (AgUCs/MgO) are synthesized by a facile impregnation/calcination method and are applied to robust oxygen-promoted formaldehyde reforming into H₂ at room temperature. Density functional theory calculations and experimental observations show that the catalyst spatially builds up a channel for directional electron transfer from electron-rich Ag sites to the anti-bonding π orbital of chemisorbed bridged O₂ molecules, leading to the implementation of low-temperature O₂ adsorption and activation. The catalytically active species, ^•OOH, is thus selectively generated via a preferential two-electron reduction of O₂ with a low energy barrier on Ag sites, involving an unusual long-range proton-coupled electron transfer process. The ^•OOH-AgUCs/MgO active center is efficient for the subsequent C-H activation and H₂ generation, leading to a 3-fold improvement of the turnover frequency as compared with its analogous AgNPs/MgO catalyst. Our atomic-level design and synthetic strategy provide a platform that facilitates the construction of an electron-proton transfer channel for catalysis, altered adsorption configurations of activated reactants, and enhancement of catalytic hydrogen generation activity, extending a promising direction for the development of next-generation energy catalysts.

UV-assisted chemiresistors made with gold-modified ZnO nanorods to detect ozone gas at room temperature

Two kinds of flexible ozone (O₃) sensors were obtained by placing pristine ZnO nanorods and gold-modified ZnO nanorods (NRs) on a bi-axially oriented poly(ethylene terephthalate) substrate. The chemiresistive sensor is operated at typically 1 V at room temperature under the UV-light illumination. The ZnO nanorods were prepared via a hydrothermal route and have a highly crystalline wurtzite structure, with diameters ranging between 70 and 300 nm and a length varying from 1 to 3 μm. The ZnO NRs were then coated with a ca. 10 nm gold layer whose presence was confirmed with microscopy analysis. This sensor is found to be superior to detect ozone at a room temperature. Typical figures of merit include (a) a sensor response of 108 at 30 ppb ozone for gold-modified ZnO NRs, and (b) a linear range that extends from 30 to 570 ppb. The sensor is stable, reproducible and selective for O₃ compared to other oxidizing and reducing gases. The enhanced performance induced by the modification of ZnO nanorods with thin layer of gold is attributed to the increased reaction kinetics compared to pristine ZnO NRs. The sensing mechanism is assumed to be based on the formation of a nano-Schottky type barrier junction at the interface between gold and ZnO. Graphical abstract Room temperature, flexible UV-enhanced gold modified ZnO nanorods can detect ppb levels of ozone.

Preparation of Ordered Mesoporous Au using Double Gyroid Mesoporous Silica KIT-6 via a Seed-Mediated Growth Process

Ordered mesoporous Au was prepared using double gyroid (cubic Ia-3d) mesoporous silica KIT-6 as a template. The Au frameworks were formed within the template via a seed-mediated growth process. Au nanoparticles were initially prepared as seeds within the mesopores, and subsequently, they were grown under mild and controlled reducing conditions. The transmission electron micrographs and scanning electron micrographs of mesoporous Au after the removal of the template revealed the formation of mesoporous Au replicas. The small-angle X-ray scattering pattern of mesoporous Au reveals that the obtained mesoporous Au has a cubic I4₁ 32 mesostructure, which is different from that of the original template, implying that Au was deposited within only one mesochannel of the two interconnected ones. The seed-mediated growth process is a key factor in the successful formation of ordered mesoporous Au using a mesoporous silica template. Our preparative method can serve as a guide for further development of synthetic and materials chemistry of mesoporous Au.

CO Preferential Photo-Oxidation in Excess of Hydrogen in Dark and Simulated Solar Light Irradiation over AuCu-Based Catalysts on SBA-15 Mesoporous Silica-Titania

In this work, SBA-15 silica and silica-titania have been used as supports for photocatalysts based on AuCu alloy (Au:Cu = 1) to be used in the preferential oxidation of CO (CO-PROX) in excess of hydrogen at room temperature and atmospheric pressure both in the dark and under simulated solar light irradiation. To study their textural, structural, chemical and optical properties, the samples were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), adsorption-desorption of N₂ at -196 °C, 13C and 29Si solid state nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance ultraviolet-visible (DRUV-vis) spectroscopy. Titanium was present mainly in the form of titania aggregates, but also as small particles interacting with the SBA support. In both catalysts, the metal alloy nanoparticles displayed an average size of 4 nm as demonstrated by TEM measurements. AuCu/Ti-SBA turned out to be photoactive and selective in the photo-CO-PROX reaction showing the highest activity, with conversion and selectivity towards CO₂ of 80%, due both to the presence of titania incorporated in SBA-15 and to the synergistic effect of Cu when alloyed with Au.

Au and AuCu Nanoparticles Supported on SBA-15 Ordered Mesoporous Titania-Silica as Catalysts for Methylene Blue Photodegradation

The photocatalytic degradation of methylene blue (MB) dye has been performed under UV irradiation in aqueous suspension, employing photocatalysts based on Au (1.5 wt %) and AuCu (Au/Cu = 1, 2.0 wt %), and supported on SBA-15-ordered mesoporous silica, with and without titania (Si/Ti = 3), in order to evaluate the versatility of this mesoporous support in this type of reaction of great impact from the environmental point of view. Samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption at -196 °C, and X-ray photoelectron spectroscopy (XPS), so as to study their structural, optical, and chemical properties. All the prepared catalysts were found to be active in the test reaction. The bimetallic AuCu-based catalysts attained very high MB degradation values, in particular AuCu/SBA-15 titania-silica sample reached 100% of dye oxidation after the monitored reaction period (120 min).

Bimetallic Au@M (M = Ag, Pd, Fe, and Cu) Nanoarchitectures Mediated by 1,4-Phenylene Diisocyanide Functionalization

Hybridization with gold has attracted a lot of attention in many application areas such as energy, nanomedicine, and catalysts. Here, we demonstrate electrochemical hybridization of two different metals by using bare and 1,4-phenylene diisocyanide (PDI) functionalized gold nanoislands (GNIs) supported on a Si substrate. As pristine GNIs are not tightly locked on the Si surface, bimetallic Au@M (M = Ag, Pd, Fe, and Cu) core-shell type nanostructures are produced by an electric-field-induced clustering of GNIs and metal deposition. On the other hand, upon functionalization of GNIs by PDI, 3D island growth on the functionalized GNI template is observed as PDI acts as a protector against the electric-field-induced clustering. Depth-profiling X-ray photoelectron spectroscopy reveals no discernible difference in the interfacial electronic structures of hybrid metals prepared by using pristine and PDI-functionalized GNI templates. This work demonstrates a new approach to produce a secured template and to manipulate growth of hybrid nanoparticles on this template supported on a Si substrate by using electrodeposition and organic functionalization.

High-Performance Silicon Photoanode Enhanced by Gold Nanoparticles for Efficient Water Oxidation

Ni catalyst is a low-cost catalyst for oxygen evolution reaction (OER) on silicon metal-insulator-semiconductor photoanode. We found that Au nanoparticles incorporated with Ni nanoparticles can enhance the OER activity and stability of Ni nanoparticles due to the local surface plasmon resonance (LSPR) effect of the Au nanoparticles. The efficiency of NiAu/TiO₂/n-Si photoanode can be boosted at least three times under the illumination (100 mW/cm²) by LSPR effect of the Au nanoparticles. A small onset potential of 1.03 V versus reversible hydrogen electrode (overpotential, η₀ = -0.20 V) and a current density of 18.80 mA/cm² at 1.23 V versus reversible hydrogen electrode can be obtained. The NiAu/TiO₂/n-Si photoanode exhibits a high saturation current density of 35 mA/cm², which is greater than that of most of the state-of-the-art silicon photoanodes.

Synthesis of Mesoporous γ-Alumina-Supported Co-Based Catalysts and Their Catalytic Performance for Chemoselective Reduction of Nitroarenes

Mesoporous γ-alumina (γ-MA)-supported cobalt oxides (Co₃O₄) with large surface areas and narrow pore size distributions were first prepared through one-pot hydrolysis of metal nitrates. The obtained Co₃O₄/γ-MA materials were impregnated with a water-ethanol solution of 1,10-phenanthroline, followed by treatment at 700 °C in N₂ atmosphere, generating Co-NC/γ-MA catalysts containing N-doped graphitic carbon (NC). The Co-NC/γ-MA catalysts maintained the mesoporous structure of γ-MA, and Co₃O₄ was reduced to metallic Co nanoparticles highly dispersed in the γ-MA frameworks. Metallic Co species had a strong interaction with NC in the matrices, avoiding the surface oxidation of Co particles. The Co-NC/γ-MA catalysts exhibited superior catalytic activity and quantitatively reduced a variety of functionalized nitroarenes to the corresponding arylamines with hydrazine hydrate in ethanol at near room temperature, affording yields of >99%. The recycling test of 2-chloronitrobenzene as a model reaction showed no detectable change in catalyst performance after 10 cycle reactions.

Ligand free green plasma-in-liquid synthesis of Au/Ag alloy nanoparticles

Au/Ag alloy nanoparticles were successfully prepared by a microwave-induced plasma in liquid process without any organic protecting or reducing agents.