Catalyst size matters: Tuning the molecular mechanism of the water–gas shift reaction on titanium carbide based compounds

Carbon dioxide hydrogenation over the carbon-terminated niobium carbide (111) surface: a density functional theory study

Carbon dioxide (CO₂) hydrogenation is an energetic process which could be made more efficient through the use of effective catalysts, for example transition metal carbides. Here, we have employed calculations based on the density functional theory (DFT) to evaluate the reaction processes of CO₂ hydrogenation to methane (CH₄), carbon monoxide (CO), methanol (CH₃OH), formaldehyde (CH₂O), and formic acid (HCOOH) over the carbon-terminated niobium carbide (111) surface. First, we have studied the adsorption geometries and energies of 25 different surface-adsorbed species, followed by calculations of all of the elementary steps in the CO₂ hydrogenation process. The theoretical findings indicate that the NbC (111) surface has higher catalytic activity towards CO₂ methanation, releasing 4.902 eV in energy. CO represents the second-most preferred product, followed by CH₃OH, CH₂O, and HCOOH, all of which have exothermic reaction energies of 4.107, 2.435, 1.090, and 0.163 eV, respectively. Except for the mechanism that goes through HCOOH to produce CH₂O, all favourable hydrogenation reactions lead to desired compounds through the creation of the dihydroxycarbene (HOCOH) intermediate. Along these routes, CH₃* hydrogenation to CH₄* has the highest endothermic reaction energy of 3.105 eV, while CO production from HCO dehydrogenation causes the highest exothermic reaction energy of -3.049 eV. The surface-adsorbed CO₂ hydrogenation intermediates have minimal effect on the electronic structure and interact only weakly with the surface. Our results are consistent with experimental observations.

Recent Advances in Carbon Dioxide Adsorption, Activation and Hydrogenation to Methanol using Transition Metal Carbides

The inevitable emission of carbon dioxide (CO₂ ) due to the burning of a substantial amount of fossil fuels has led to serious energy and environmental challenges. Metal-based catalytic CO₂ transformations into commodity chemicals are a favorable approach in the CO₂ mitigation strategy. Among these transformations, selective hydrogenation of CO₂ to methanol is the most promising process that not only fulfils the energy demands but also re-balances the carbon cycle. The investigation of CO₂ adsorption on the surface of heterogeneous catalyst is highly important because the formation of various intermediates which determines the selectivity of product. Transition metal carbides (TMCs) have received considerable attention in recent years because of their noble metal-like reactivity, ceramic-like properties, high chemical and thermal stability. These features make them excellent catalytic materials for a variety of transformations such as CO₂ adsorption and its conversion into value-added chemicals. Herein, the catalytic properties of TMCs are summarize along with synthetic methods, CO₂ binding modes, mechanistic studies, effects of dopant on CO₂ adsorption, and carbon/metal ratio in the CO₂ hydrogenation reaction to methanol using computational as well as experimental studies. Additionally, this Review provides an outline of the challenges and opportunities for the development of potential TMCs in CO₂ hydrogenation reactions.

Mo2C as Pre-Catalyst for the C-H Allylic Oxygenation of Alkenes and Terpenoids in the Presence of H2O2

In this study, commercially available molybdenum carbide (Mo2C) was used, in the presence of H2O2, as an efficient pre-catalyst for the selective C-H allylic oxygenation of several unsaturated molecules into the corresponding allylic alcohols. Under these basic conditions, an air-stable, molybdenum-based polyoxometalate cluster (Mo-POM) was formed in situ, leading to the generation of singlet oxygen (1O2), which is responsible for the oxygenation reactions. X-ray diffraction, SEM/EDX and HRMS analyses support the formation mainly of the Mo6O192− cluster. Following the proposed procedure, a series of cycloalkenes, styrenes, terpenoids and methyl oleate were successfully transformed into hydroperoxides. After subsequent reduction, the corresponding allylic alcohols were produced with good yields and in lab-scale quantities. A mechanistic study excluded a hydrogen atom transfer pathway and supported the twix-selective oxygenation of cycloalkenes on the more sterically hindered side via the 1O2 generation.

A first-principles study of CO2 hydrogenation on Niobium-terminated NbC (111) surface

As a promising material for the reduction of Greenhouse gas, Transition metal carbides which are highly active in the hydrogenation of CO2 are mainly considered. In this regard, the reaction mechanism of CO2 hydrogenation to useful products on the Nb-terminated NbC (111) surface is investigated by applying density functional theory calculations. The computational results display that formation of CH4 , CH3OH and CO are more favored than other compounds, where CH4 is the dominant product. In addition, the findings from reaction energies reveal that the preferred mechanism for CO2 hydrogenation is thorough HCOOH * where the largest exothermic reaction energy releases during HCOOH * dissociation reaction (2.004eV). The preferred mechanism of CO2 hydrogenation towards CH 4 production is CO2 *→ t,c-COOH *→ HCOOH *→ HCO *→ CH2O *→ CH2OH *→ CH2 *→ CH3 *→ CH4 * where CO2 * → t,c-COOH * → HCOOH * → HCO * → CH2O * → CH2OH * → CH3OH * and CO2 * → t,c-COOH * → CO * are also found as the favored mechanisms for CH3 OH and CO productions thermodynamically, respectively. During the mentioned mechanisms the hydrogenation of CH2O * to CH2OH * has the largest endothermic reaction energy of 1.344 eV. It is also found from the electronic properties calculations that Nb-terminated NbC (111) is a suitable catalyst for CO2 hydrogenation where adsorption and activation of CO2 and also desorption of final products can be easily done on the surface.

Can calculated harmonic vibrational spectra rationalize the structure of TiC-based nanoparticles?

Nanoscale titanium carbide (TiC) is widely used in composites and energy applications. In order to design and optimize these systems and to gain a fundamental understanding of these nanomaterials, it is important to understand the atomistic structure of nano-TiC. Cluster beam experiments have provided detailed infrared vibrational spectra of numerous Ti_xC_y nanoparticles with well defined masses. However, these spectra have yet to be convincingly assigned to Ti_xC_y nanoparticle structures. Herein, using accurate density functional theory based calculations, we perform a systematic survey of likely candidate nanoparticle structures with masses corresponding to those in experiment. We calculate harmonic infrared vibrational spectra for a range of nanoparticles up to 100 atoms in size, with a focus on systems based on removing either four carbon atoms or a single titanium atom from rocksalt-structured stoichiometric TiC nanoparticles. Our calculations clearly show that Ti-deficient nanoparticles are unlikely candidates to explain the experimental spectra as such structures are highly susceptible to C-C bonding, whose characteristic frequencies are not observed in experiment. However, our calculated infrared spectra for C-deficient nanoparticles have some matching features with the experimental spectra but tend to have more complex infrared spectra with more peaks than those obtained from experiment. We suggest that the discrepancy between experiment and theory may be largely due to thermally induced anharmonicities and broadening in the latter nanoparticles, which are not be accounted for in harmonic vibrational calculations.

Two-dimensional molybdenum carbide 2D-Mo2C as a superior catalyst for CO2 hydrogenation

Early transitional metal carbides are promising catalysts for hydrogenation of CO₂. Here, a two-dimensional (2D) multilayered 2D-Mo₂C material is prepared from Mo₂CT_x of the MXene family. Surface termination groups T_x (O, OH, and F) are reductively de-functionalized in Mo₂CT_x (500 °C, pure H₂) avoiding the formation of a 3D carbide structure. CO₂ hydrogenation studies show that the activity and product selectivity (CO, CH₄, C₂–C₅ alkanes, methanol, and dimethyl ether) of Mo₂CT_x and 2D-Mo₂C are controlled by the surface coverage of T_x groups that are tunable by the H₂ pretreatment conditions. 2D-Mo₂C contains no T_x groups and outperforms Mo₂CT_x, β-Mo₂C, or the industrial Cu-ZnO-Al₂O₃ catalyst in CO₂ hydrogenation (evaluated by CO weight time yield at 430 °C and 1 bar). We show that the lack of surface termination groups drives the selectivity and activity of Mo-terminated carbidic surfaces in CO₂ hydrogenation.

The development of robust and efficient catalysts for CO₂ hydrogenation to value-added chemicals is an urgent task. Here the authors report two-dimensional carbide catalyst based on earth-abundant molybdenum that hydrogenates CO₂ with high activity, stable performance and tunable selectivity.

First-principles study on the effects of N and Al doping on the mechanical properties and electronic structures of TiC

First-principles calculations are carried out by DFT within the CASTEP plane wave code to investigate the mechanical properties and electronic structure of N and Al doped TiC. The results show that the co-doping of nitrogen and aluminum narrows the lattice constant and nitrogen could enhance the stability of TiC, however, aluminum makes the compound unstable. The calculated elastic constants and elastic moduli reveal that aluminum reduces the elastic constants, bulk modulus B, shear modulus G and Young's modulus E, but nitrogen can enhance them. The results of B/G and C₁₂–C₄₄ indicate that aluminum could significantly increase the ductility of TiC. Meanwhile, the electronic structure calculations reveal that strong p–d covalent bonds exist among C-p, N-p, Ti-d and Al-p states and Al-doping causes DOS peak transfer to a higher energy level and increases the DOS above the Fermi level. The hardness is estimated by a semi-empirical model that is based on the Mulliken overlap population and bond length. The addition of Al sharply reduces the hardness of the TiC-based alloys due to the weakest bond taking a determinative role in the hardness of materials, which is the C–Al bond in those compounds.

First-principles calculations are carried out by DFT within the CASTEP plane wave code to investigate the mechanical properties and electronic structure of N and Al doped TiC.

CO2 capture, activation and dissociation on the Ti2C surface and Ti2C MXene: the role of surface structure

Barrier-less CO₂ activation on Ti₂C(100) and MXene with preferential adsorption on the (100) surface and a lower dissociation barrier on MXene.

An electronic perturbation in TiC supported platinum monolayer catalyst for enhancing water-gas shift performance: DFT study

The water-gas shift (WGS) reaction behaviors over the TiC(0 0 1) supported Pt monolayer catalyst (Pt_ML/TiC(0 0 1)) are investigated by using the spin-unrestricted density functional theory calculations. Importantly, we find that the Pt_ML/TiC(0 0 1) system exhibits a much lower density of Pt-5d states nearby the Fermi level compared with that for Pt(1 1 1), and the monolayer Pt atoms undergo an electronic perturbation when in contact with TiC(0 0 1) support that would strongly improve the WGS activity of supported Pt atoms. Our calculations clearly indicate that the dominant reaction path follows a carboxyl mechanism involving a key COOH intermediate, rather than the common redox mechanism. Furthermore, through the detailed comparisons, the results demonstrate that the strong interactions between the monolayer Pt atoms and TiC(0 0 1) support make Pt_ML/TiC(0 0 1) a highly active catalyst for the low-temperature WGS reaction. Following the route presented by Bruix et al (2012 J. Am. Chem. Soc. 134 8968-74), the positive effect derived from strong metal-support interaction in the metal/carbide system is revealed.

Nitrogen electroreduction and hydrogen evolution on cubic molybdenum carbide: a density functional study

The (111) surface of cubic MoC was found to be active for nitrogen electroreduction to ammonia via an associative Heyrovsky path.

Adsorption of atmospheric gases on cementite 010 surfaces

We study the adsorption of a series of small molecules on the nonstoichiometric {010} surface of cementite (θ-Fe3C) by means of first-principles calculations. We find that CO, N2, H2O, and CH4 prefer to adsorb over iron atoms in an atop configuration. O2, CO2, and the OH radical prefer a configuration bridging two iron atoms and CH2O adsorbs in a configuration bridging a surface iron atom and a surface carbon atom. Adsorption energies are small for H2, CO2, and CH4, indicating a physisorption process, while those for CO, CH2O and especially for O2 and the OH radical are large, indicating a strong chemisorption process. H2O and N2 display adsorption energies between these two extremes, indicating moderate chemisorption. The dissociation of H2, CH2O, the OH radical, and O2 is favoured on this surface. Comparison with adsorption on Fe{100} surfaces indicates that most of these gases have similar adsorption energies on both surfaces, with the exception of CO and the OH radical. In addition, we find similarities between the reactivities of cementite and Mo2C surfaces, due to the similar covalent character of both carbides.

Highly active Au/δ-MoC and Au/β-Mo2C catalysts for the low-temperature water gas shift reaction: effects of the carbide metal/carbon ratio on the catalyst performance

Water gas shift reaction catalyzed by Mo carbides surfaces and on Au supported thereon is studied by experiments and computational methods.

Theoretical study on the reaction mechanism of reverse water–gas shift reaction using a Rh–Mo6S8 cluster

The reverse water gas shift (RWGS) reaction catalyzed by a Rh–Mo₆S₈ cluster is investigated using density functional theory calculations.

The bending machine: CO2 activation and hydrogenation on δ-MoC(001) and β-Mo2C(001) surfaces

The adsorption and activation of a CO₂ molecule on cubic δ-MoC(001) and orthorhombic β-Mo₂C(001) surfaces have been investigated by means of periodic density functional theory based calculations using the Perdew–Burke–Ernzerhof exchange–correlation functional and explicitly accounting for (or neglecting) the dispersive force term description as proposed by Grimme.