Understanding the synergistic effects of gold bimetallic catalysts

Role of transition metals in coinage metal nanoclusters for the remediation of toxic dyes in aqueous systems

A difficult issue in chemistry and materials science is to create metal compounds with well-defined components. Metal nanoclusters, particularly those of coinage groups (Cu, Ag, and Au), have received considerable research interest in recent years owing to the availability of atomic-level precision via joint experimental and theoretical methods, thus revealing the mechanisms in diverse nano-catalysts and functional materials. The textile sector significantly contributes to wastewater containing pollutants such as dyes and chemical substances. Textile and fabric manufacturing account for about 7 × 105 tons of wastewater annually. Approximately one thousand tons of dyes used in textile processing and finishing has been recorded as being discharged into natural streams and water bodies. Owing to the widespread environmental concerns, research has been conducted to develop absorbents that are capable of removing contaminants and heavy metals from water bodies using low-cost technology. Considering this idea, we reviewed coinage metal nanoclusters for azo and cationic dye degradation. Fluorometric and colorimetric techniques are used for dye degradation using coinage metal nanoclusters. Few reports are available on dye degradation using silver nanoclusters; and some of them are discussed in detailed herein to demonstrate the synergistic effect of gold and silver in dye degradation. Mostly, the Rhodamine B dye is degraded using coinage metals. Silver nanoclusters take less time for degradation than gold and copper nanoclusters. Mostly, H2O2 is used for degradation in gold nanoclusters. Still, all coinage metal nanoclusters have been used for the degradation due to suitable HOMO-LUMO gap, and the adsorption of a dye onto the surface of the catalyst results in the exchange of electrons and holes, which leads to the oxidation and reduction of the adsorbed dye molecule. Compared to other coinage metal nanoclusters, Ag/g-C3N4 nanoclusters displayed an excellent degradation rate constant with the dye Rhodamine B (0.0332 min-1). The behavior of doping transition metals in coinage metal nanoclusters is also reviewed herein. In addition, we discuss the mechanistic grounds for degradation, the fate of metal nanoclusters, anti-bacterial activity of nanoclusters, toxicity of dyes, and sensing of dyes.

Structure-driven tuning of catalytic properties of core-shell nanostructures

The annual increase in demand for renewable energy is driving the development of catalysis-based technologies that generate, store and convert clean energy by splitting and forming chemical bonds. Thanks to efforts over the last two decades, great progress has been made in the use of core-shell nanostructures to improve the performance of metallic catalysts. The successful preparation and application of a large number of bimetallic core-shell nanocrystals demonstrates the wide range of possibilities they offer and suggests further advances in this field. Here, we have reviewed recent advances in the synthesis and study of core-shell nanostructures that are promising for catalysis. Particular attention has been paid to the structural tuning of the catalytic properties of core-shell nanostructures and to theoretical methods capable of describing their catalytic properties in order to efficiently search for new catalysts with desired properties. We have also identified the most promising areas of research in this field, in terms of experimental and theoretical studies, and in terms of promising materials to be studied.

Novel magnetic bimetallic AuCu catalyst for reduction of nitroarenes and degradation of organic dyes

Herein, core-shell magnetic nanoparticles are modified with imidazolium-tagged phosphine and propylene glycol moieties and used for the stabilization of bimetallic AuCu nanoparticles. The structure and morphology of the prepared material are identified with SEM, TEM, XRD, XPS, atomic absorption spectroscopy, Fourier translation infrared spectroscopy, and a vibrating sample magnetometer. This hydrophilic magnetic bimetallic catalyst is applied in the reduction of toxic nitroarenes and reductive degradation of hazardous organic dyes such as methyl orange (MO), methyl red (MR), and rhodamine B (RhB), as well as in the degradation of tetracycline (TC). This magnetic AuCu catalyst indicated superior activity in all three mentioned reactions in comparison with its single metal Au and Cu analogs. This catalyst is recycled for 17 consecutive runs in the reduction of 4-nitrophenol to 4-aminophenol without a significant decrease in catalytic activity and recycled catalyst is characterized.

Thermal Stability of Au Rhombic Dodecahedral Nanocrystals Can Be Greatly Enhanced by Coating Their Surface with an Ultrathin Shell of Pt

Rhombic dodecahedral nanocrystals have been considered particularly difficult to synthesize because they are enclosed by {110}, a low-index facet with the greatest surface energy. Recently, we demonstrated the use of seed-mediated growth for the facile and robust synthesis of Au rhombic dodecahedral nanocrystals (AuRD). While the unique shape and surface structure of AuRD are desirable for potential applications in plasmonics and catalysis, respectively, their high surface energy makes them highly susceptible to thermal degradation. Here we demonstrate that it is feasible to greatly improve the thermal stability with some sacrifice to the plasmonic properties of the original AuRD by coating their surface with an ultrathin shell made of Pt. Our in situ electron microscopy analysis indicates that the ultrathin Pt coating can increase the thermal stability from 60 up to 450 °C, a trend that is also supported by the results from a computational study.

Very Low Temperature CO Oxidation over Atomically Precise Au25 Nanoclusters on MnO2

Atomically precise Au25 nanoclusters have garnered significant interest in the field of heterogeneous catalysis due to their remarkable activity and selectivity. However, for the extensively studied reaction of low-temperature CO oxidation, their performance has not been competitive compared to other known gold nanocatalysts. To address this, we deposited Au25(SR)18 (R = CH2CH2Ph) nanoclusters onto a manganese oxide support (Au25/MnO2), resulting in a very stable and highly active catalyst. By optimizing the pretreatment temperature, we were able to significantly enhance the performance of the Au25/MnO2 catalyst, which outperformed most other gold catalysts. Impressively, 100% conversion of CO was achieved at temperatures as low as -50 °C, with 50% conversion being reached below -70 °C. Furthermore, the existence of ligands could also influence the negative apparent activation energy observed at intermediate temperatures. Analysis using X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and X-ray diffraction (XRD) techniques indicated that the Au25 nanoclusters remained stable on the catalyst surface even after pretreatment at high temperatures. In-situ modulation excitation spectroscopy (MES) spectra also confirmed that the Au cluster was the active site for CO oxidation, highlighting the potential of atomically precise Au25 nanoclusters as primary active sites at very low temperatures.

Single-Atom Catalysts for Hydrogen Activation

Selective hydrogenation is one of the most important reactions in fine chemical industry, and the activation of H₂ is the key step for hydrogenation. Catalysts play a critical role in selective hydrogenation, and some single-atom catalysts (SACs) are highly capable of activating H₂ in selective hydrogenation by virtue of the maximized atom utilization and the highly uniform active sites. Therefore, more research efforts are needed for the rational design of SACs with superior H₂ -activating capabilities. Herein, the research progress on H₂ activation in typical hydrogenation systems (such as alkyne hydrogenation, hydroformylation, hydrodechlorination, hydrodeoxygenation, nitroaromatics hydrogenation, and polycyclic aromatics hydrogenation) is reviewed, the mechanisms of SACs for H₂ activation are summarized, and the structural regulation strategies for SACs are proposed to promote H₂ activation and provide schemes for the design of high-selectivity hydrogenation catalysts from the atomic scale. At the end of this review, an outlook on the opportunities and challenges for SACs to be developed for selective hydrogenation is presented.

Current state of copper-based bimetallic materials for electrochemical CO2 reduction: a review

The increasing CO₂ concentration in the atmosphere has caused profound environmental issues such as global warming. The use of CO₂ as a feedstock to replace traditional fossil sources holds great promise to reduce CO₂ emissions. The electrochemical conversion of CO₂ has attracted much attention because it can be powered by renewable sources such as solar energy. In this review article, we provide insight into the important parameters when studying CO₂RR and give a comprehensive review on the description of synthesis methods with electrocatalytic CO₂ reduction over bimetallic copper-based materials. Due to the important bibliographic data on Cu bimetallic materials, we have limited this review to Sn, In, Pd, Zn and Ag. At the end of this review, challenges and perspectives for further upgrading have been included to briefly highlight the important future considerations of this rapidly growing technology.

The increasing CO₂ concentration in the atmosphere has caused profound environmental issues such as global warming.

Enhancing the electrocatalytic activity of palladium nanocluster tags by selective introduction of gold atoms: Application for a wound infection biomarker detection

In this work, an unprecedented study exploring the role that slight changes into the Pd/Au proportion have in the electrocatalytic activity of bimetallic Pd-AuNPs toward the oxygen reduction reaction (ORR) is conducted. In particular, a careful control of the amount of Au atoms introduced in the cluster and the evaluation of the optimum Pd:Au ratio for getting the maximum catalytic activity is performed for the first time. First, PdNPs are synthesized by alcohol reduction in the presence of polyvinylpyrrolidone, and gold atoms are selectively introduced on vertex or corner positions of the cluster in different amounts following a galvanic substitution procedure. Average elemental analysis done relying on EDX spectroscopy allows to evaluate the Pd:Au ratio in the Pd-AuNPs obtained. Lineal sweep voltammetry and chronoamperometry are used for the evaluation of the Pd-AuNPs electrocatalytic activity toward ORR at a neutral pH compared to PdNPs and AuNPs alone. Our results indicate that, the synergy between both metals is strongly enhanced when the amount of gold is controlled and occupies the more reactive positions of the cluster, reaching a maximum activity for the NPs containing a 30% of gold, while an excess of this metal leads to a decrease in such activity, as a shelter of the PdNPs is achieved. Chronoamperometric analysis allows the quantification of the optimal Pd-AuNPs at over 6 × 10⁹ NPs/mL levels. Such optimal Pd-AuNPs were used as tags, taking advantage of the bio-functionalities of gold present in the cluster, in a proof-of-concept electrochemical immunosensor for the detection of hyaluronidase wound infection biomarker, using magnetic beads as platforms. Hyaluronidase was detected at levels as low as 50 ng/mL (0.02 U/mL; 437 U/mg) with good reproducibility (RSD below 8%) and selectivity (evaluated against bovine serum albumin, immunoglobulin G and lysozyme). The low matrix effects inherent to the use of magnetic bead platforms allowed us to discriminate between wound exudates with both sterile and infected ulcers without sample pre-treatment. This novel electrocatalytic immunoassay has the advantage, over common methods for NP tags electrochemical detection, of the signal generation in the same neutral medium where the immunoassay takes place (10 mM PBS pH 7.4), avoiding the use of additional and hazardous reagents, bringing it closer to their use as point-of-care devices. Overall, our findings may be of great interest not only for biosensing, but also for applications such as energy converting on fuel cells, in which the ORR has a pivotal role.

Au-Pd separation enhances bimetallic catalysis of alcohol oxidation

In oxidation reactions catalysed by supported metal nanoparticles with oxygen as the terminal oxidant, the rate of the oxygen reduction can be a limiting factor. This is exemplified by the oxidative dehydrogenation of alcohols, an important class of reactions with modern commercial applications^1-3. Supported gold nanoparticles are highly active for the dehydrogenation of the alcohol to an aldehyde⁴ but are less effective for oxygen reduction^5,6. By contrast, supported palladium nanoparticles offer high efficacy for oxygen reduction^5,6. This imbalance can be overcome by alloying gold with palladium, which gives enhanced activity to both reactions^7,8,9; however, the electrochemical potential of the alloy is a compromise between that of the two metals, meaning that although the oxygen reduction can be improved in the alloy, the dehydrogenation activity is often limited. Here we show that by separating the gold and palladium components in bimetallic carbon-supported catalysts, we can almost double the reaction rate compared with that achieved with the corresponding alloy catalyst. We demonstrate this using physical mixtures of carbon-supported monometallic gold and palladium catalysts and a bimetallic catalyst comprising separated gold and palladium regions. Furthermore, we demonstrate electrochemically that this enhancement is attributable to the coupling of separate redox processes occurring at isolated gold and palladium sites. The discovery of this catalytic effect-a cooperative redox enhancement-offers an approach to the design of multicomponent heterogeneous catalysts.

Modification of Gold Zeolitic Supports for Catalytic Oxidation of Glucose to Gluconic Acid

Activity of gold supported catalysts strongly depends on the type and composition of support, which determine the size of Au nanoparticles (Au NPs), gold-support interaction influencing gold properties, interaction with the reactants and, in this way, the reaction pathway. The aim of this study was to use two types of zeolites: the three dimensional HBeta and the layered two-dimensional MCM-36 as supports for gold, and modification of their properties towards the achievement of different properties in oxidation of glucose to gluconic acid with molecular oxygen and hydrogen peroxide. Such an approach allowed establishment of relationships between the activity of gold catalysts and different parameters such as Au NPs size, electronic properties of gold, structure and acidity of the supports. The zeolites were modified with (3-aminopropyl)-trimethoxysilane (APMS), which affected the support features and Au NPs properties. Moreover, the modification of the zeolite lattice with boron was applied to change the strength of the zeolite acidity. All modifications resulted in changes in glucose conversion, while maintaining high selectivity to gluconic acid. The most important findings include the differences in the reaction steps limiting the reaction rate depending on the nature of the oxidant applied (oxygen vs. H₂O₂), the important role of porosity of the zeolite supports, and accumulation of negative charge on Au NPs in catalytic oxidation of glucose.

Highly efficient blackberry-like trimetallic PdAuCu nanoparticles with optimized Pd content for ethanol electrooxidation

The rational design of highly efficient catalysts for ethanol electrooxidation is extremely challenging for developing direct ethanol fuel cells (DEFCs). Herein, a facile one-pot method has been developed to prepare blackberry-like PdAuCu nanoparticles (NPs) with tunable composition and surface structures. Among PdAuCu NPs with different Pd contents (1.6-22 mass%), PdAuCu NPs-0.5 (contained Pd at 2.5 mass%) delivered one of the highest catalytic activities of Pd-based catalysts towards ethanol electrooxidation, exhibiting a mass activity of 23.0 A mg_Pd^-1. Kinetic analysis, electrochemical impedance spectroscopy and CO stripping test results suggested that the excellent electrocatalytic activity may originate from the optimized balance between Pd content and surface structure of PdAuCu NPs-0.5. The optimization of the balance between composition and surface structure would contribute to the further design of multimetallic nanoparticles for fuel cells and other applications.

Towards High Efficacy of Pd-Au/C Catalyst for Tetrachloromethane Hydrodechlorination

We present an efficient strategy for synthesising the PdAu catalysts with a homogeneous PdAu alloy phase for environmentally important hydrodechlorination of tetrachloromethane in the gas phase. The synthesis of carbon-supported catalysts involved two major steps: (i) incorporation of palladium and gold nanoparticles into carbon support and (ii) activation of the catalysts. The critical part of this work was to find the optimal conditions for both steps. Thus, the incorporation of the nanoparticles was carried out in two ways, by impregnation and direct redox reaction method using acetone solutions of metal precursor salts. The activation was performed either by a conventional thermal reduction in hydrogen or flash irradiation in a microwave oven. The homogeneity and structure of the PdAu alloy were found to depend on the catalyst activation method critically. In all cases, we observed better homogeneity for catalysts that were subject to microwave irradiation. Moreover, the flash microwave irradiation of prepared catalysts provided catalysts of better stability and selectivity towards the desired products (hydrocarbons) in the hydrodechlorination of tetrachloromethane as compared to the catalyst obtained by conventional thermal activation in hydrogen.

Recent Advances in the Engineering of Single-Atom Catalysts Through Metal-Organic Frameworks

This mini-review highlights some recent progress in the engineering of single-atom catalysts (SACs) through metal-organic frameworks (MOFs) and derivatives. The inherent molecular and chemical specificities within the MOFs and derivatives can offer stabilisation of the SACs with high atomic isolation and dispersion. As MOFs are often considered an infinite array of self-assembled molecular catalysts, specifically designed structures can provide further functionalities to suit the needs of different catalytic applications. In brief, we can divide the preparation approaches into three main categories: (1) fabrication onto functional groups of the ligands, (2) fabrication onto Lewis acid sites of nodal centres, and (3) synthesis via a pyrolysis-mediated technique. Through these approaches, strong metal-support interactions can be established to aid the fine-tuning of the catalytic properties. We also discuss how recent progress in the development of state-of-the-art microscopic, spectroscopic, and crystallographic techniques has enabled scientists to elucidate the structure-activity relationship.

Unusual behavior of bimetallic nanoparticles in catalytic processes of hydrogenation and selective oxidation

Recent results obtained in studying mono- and bimetallic catalysts for selective hydrogenation of unsaturated carbonyl compounds, even unsaturated ones, acetylenic and nitro compounds as well as CO and bio-available alcohols oxidation are reviewed from the standpoint of the strong interaction between the metal nanoparticles, on the one hand, and two metals in the composition of bimetallic nanoparticles, on the other hand. Such interactions were demonstrated to result in partial positive or negative charging of metal nanoparticles, which, in turn, changes their adsorption and catalytic properties, especially with respect to the reactions involving hydrogen. Among the systems studied, Au–Pt, Au–Pd, Au–Cu, Au–Fe, Pt–WO x , Fe–Pd, Fe–Pt, Fe–Cu nanoparticles prepared by the redox procedure are considered to be most perspective in diverse catalytic applications because of the proper combination of the particle size and the electronic state of the metals.

Non-oscillatory micromotors “learn” to oscillate on-the-fly from oscillating Ag micromotors

Oscillating Ag-containing micromotors release silver ions that diffuse and deposit on the surface of Au–Rh microrods, which then learn to oscillate individually or collectively as a wave.

Bimetallic coatings synergistically enhance the speeds of photocatalytic TiO2 micromotors

A bimetallic cap containing sputtered silver is a better catalyst that significantly improves the performance of catalytically powered micromotors.

Facile synthesis of Ag-CuO/SBA-15 for aerobic epoxidation of olefins with high activity

An efficient 'structure-property' catalyst Ag-CuO/SBA-15 for aerobic epoxidation of olefins was designed and prepared via a simple grinding method, which provided a dynamic assembly driving force to push the precursors into the channels step by step. Partial melting on the precursor particles surface is necessary for synthesizing the Ag-CuO/SBA-15 catalysts. During the thermal grinding process, the partial melting Cu(NO₃)₂ first adhered on AgNO₃ particles surface because the N of AgNO₃ possess stronger interaction with Cu(NO₃)₂ than OH- of SBA-15, then the mixture of melting precursors on AgNO₃ particles surface were sucked into the channels of SBA-15 step by step. Finally, high dispersion of both Ag and CuO nanoparticles were formed in the SBA-15 channels after calcination. The interaction between Ag and CuO, which was characterized by high-resolution transmission electron microscopy, UV-vis and x-ray powder diffraction, enhances the catalytic activity of the catalysts, giving high conversion and selectivity to the epoxides. The reaction mechanism is as follows, the solvent xylene molecule was first oxidized on the Ag surface to form methyl-benzaldehyde (R1), and then moved to the CuO surface to form the peroxidic radical (R2), the peroxidic radical attacked the trans-stilbene C=C bonds on the CuO surface to obtain the epoxides. This synergistic effect shows high activity toward the epoxidation of trans-stilbene.

Use of an Environmental Pollutant From Hexavalent Chromium Removal as a Green Catalyst in The Fenton Process

The present study refers to the use of an environmental pollutant generated during the removal of hexavalent chromium from aqueous media. This pollutant is a material with catalytic properties suitable for application in the oxidative degradation of problematic organic compounds. The material, initially used as an adsorbent, is a composite prepared by modifying the crystalline phases of iron oxides together with the chitosan (CT-FeCr). Chemical and morphological characterizations of the materials were performed using SEM analysis coupled with EDS, XRD and DSC. The CT-FeCr beads were used in the degradation of methylene blue dye (MB) and showed excellent degradation potential (93.6%). The presence of Cr on the surface of the catalyst was responsible for the increase in catalytic activity compared to the CT-Fe and pure magnetite materials. The product of the effluent treatment and the presence of the catalyst itself in the environment do not pose toxic effects. In addition, the CT-FeCr beads showed catalytic stability for several consecutive reaction cycles with possible technical and economic viability. The concept of "industrial symbiosis" may be applied to this technology, with that term relating to the reuse of a byproduct generated in one particular industrial sector by another as a raw material.

Pd-Colloids-Catalyzed/Ag2 O-Oxidized General and Selective Esterification of Benzylic Alcohols

Palladium colloids obtained from the degradation of Hermann-Beller palladacycle proved to be an efficient catalytic system in combination with silver oxide as a selective oxidant for the oxidative esterification of differently substituted benzyl alcohols in MeOH as solvent. Excellent reactivity exhibited by the catalytic system also allowed the alcoholic coupling partner to be changed from MeOH to a wide range of alcohols having diverse functionalities. The mildness of the developed protocol also made it possible to employ propargyl alcohol as the coupling partner without any observation of any interference of the terminal alkyne. Selective oxidative coupling of a primary alcoholic functional group over secondary in the case of glycols and glycerols was also made possible using the developed catalyst system. To test the relevancy of Pd/Ag combined catalysis mixed Pd/Ag colloids were synthesized, characterized by TEM, XRD and XPS and applied to oxidative-esterification successfully.

Compositional effect of two-dimensional monodisperse AuPd bimetallic nanoparticle arrays fabricated by block copolymer nanopatterning on catalytic activity of CO oxidation

We present a straightforward approach for fabricating AuPd nanocatalysts based on self-assembled block copolymer nanopatterning. CO oxidation was carried out on AuPd alloy nanoparticles and the activity increased with increasing Pd content; this synergistic activity can be precisely tuned by varying the chemical composition. Theoretical calculations suggest that Pd clusters are required to bind and dissociate O2 for oxidation of coadsorbed CO molecules. Our results suggest that the geometric configuration of the Pd atoms on the surface are a key factor in the catalytic activity.

Gold nanocatalysts supported on carbon for electrocatalytic oxidation of organic molecules including guanines in DNA

Gold (Au) is chemically stable and resistant to oxidation. Although bulk Au is catalytically inert, nanostructured Au exhibits unique size-dependent catalytic activity. When Au nanocatalysts are supported on conductive carbon (denoted as Au@C), Au@C becomes promising for a wide range of electrochemical reactions such as electrooxidation of alcohols and electroreduction of carbon dioxide. In this mini-review, we summarize Au@C nanocatalysts with specific attention on the most recent achievements including the findings in our own laboratories, and show that Au nanoclusters (AuNCs, <2 nm) on nitrided carbon are excellent electrocatalysts for the oxidation of organic molecules including guanines in DNA. The state-of-the-art synthesis and characterization of these nanomaterials are also documented. Synergistic interactions among Au-containing multicomponents on carbon supports and their applications in electrocatalysis are discussed as well. Finally, challenges and future outlook for these emerging and promising nanomaterials are envisaged.

Synergistic Effect of Segregated Pd and Au Nanoparticles on Semiconducting SiC for Efficient Photocatalytic Hydrogenation of Nitroarenes

Efficient catalytic hydrogenation of nitroarenes to anilines with molecular hydrogen at room temperature is still a challenge. In this study, this transformation was achieved by using a photocatalyst of SiC-supported segregated Pd and Au nanoparticles. Under visible-light irradiation, the nitrobenzene hydrogenation reached a turnover frequency as high as 1715 h^-1 at 25 °C and 0.1 MPa of H₂ pressure. This exceptional catalytic activity is attributed to a synergistic effect of Pd and Au nanoparticles on the semiconducting SiC, which is different from the known electronic or ensemble effects in Pd-Au catalysts. This kind of synergism originates from the plasmonic electron injection of Au and the Mott-Schottky contact at the interface between Pd and SiC. This three-component system changes the electronic structures of the SiC surface and produces more active sites to accommodate the active hydrogen that spills over from the surface of Pd. These active hydrogen species have weaker interactions with the SiC surface and thus are more mobile than on an inert support, resulting in an ease in reacting with the N═O bonds in nitrobenzene absorbed on SiC to produce aniline.

Sinter-Resistant and Highly Active Sub-5 nm Bimetallic Au-Cu Nanoparticle Catalysts Encapsulated in Silica for High-Temperature Carbon Monoxide Oxidation

A novel gold-copper-based silica-encapsulated mixed metal oxide (MMO) core-shell catalyst-with sub-5 nm MMO particles-was successfully synthesized via a reverse micelle process. The SiO₂-encapsulated MMO catalyst was reduced under hydrogen flow to produce an Au-Cu@SiO₂ catalyst. X-ray diffraction and X-ray photoelectron spectroscopy characterization confirmed the presence of Au-Cu nanocomposites in the catalyst, while transmission electron microscopy characterization revealed the core-shell structure of the catalyst with the presence of sub-5 nm Au-Cu nanoparticle cores inside SiO₂ shells. Brunauer-Emmett-Teller surface characterization identified that the catalyst is porous and bimodal in nature. The effects of promoter metal ion, catalyst pretreatment (calcination), and the presence of CO₂ in the feed stream on carbon monoxide (CO) oxidation over the Au-Cu@SiO₂ catalyst were examined in the temperature range of 50-400 °C. A catalyst stability test was performed at 300 °C by conducting a CO oxidation reaction for 116 h on stream. The catalyst exhibited excellent efficacy for CO oxidation, with ∼100% conversion to CO₂ achieved at 400 °C. While the presence of Cu enhanced the CO conversion at low to intermediate temperatures (50-300 °C), silica encapsulation of the Au-Cu nanocomposites facilitated remarkable stability of the catalyst. The activity of the Au-Cu@SiO₂ catalyst is suitable for its application in automotive after-treatment devices, especially in low-temperature combustion engine exhausts.

In situ formation of the active sites in Pd–Au bimetallic nanocatalysts for CO oxidation: NAP (near ambient pressure) XPS and MS study

Transformation of the surface structure of HOPG-supported bimetallic Pd–Au particles in the course of CO oxidation has been demonstrated using NAP XPS and MS techniques.

Au–Pd bimetallic nanoparticles supported on a high nitrogen-rich ordered mesoporous carbon as an efficient catalyst for room temperature Ullmann coupling of aryl chlorides in aqueous media

An ionic liquid derived highly nitrogen-rich mesoporous carbon supported Au–Pd alloy was found to be an efficient and recyclable catalyst for the Ullmann coupling reaction of various aryl chlorides at room temperature.