Selective oxidation of methanol to form dimethoxymethane and methyl formate over a monolayer V2O5/TiO2 catalyst

Unsaturated Penta-Coordinated Mo5c5+ Sites Enabled Low-Temperature Oxidation of C-H Bonds in Ethers

Selective oxidation of C-H bonds under mild conditions is one of the most important and challenging issues in utilization of energy-related molecules. Molybdenum oxide nanostructures containing Mo5+ species are effective for these reactions, but the accurate identification of the structure of active Mo5+ species and the catalytic mechanism remain unclear. Herein, unsaturated penta-coordinated Mo5c5+ with a high fraction in MoOx fabricated by the hydrothermal method were identified as the active sites for low-temperature oxidation of dimethyl ether (DME) by the deep correlation of characterizations, density functional theory calculations, and activity results, giving a methyl formate selectivity of 96.3% and DME conversion of 12.5% at unreported 110 °C. Low-temperature electron spin resonance (ESR) and quasi in situ X-ray photoelectron spectra (XPS) with the designed experiments confirm that the Mo5c5+ species can be formed in situ. Molybdenum located at the pentachronic site is preferable to significantly promote the oxidation of the C-H bond in CH3O* at lower temperatures.

Novel Vanadia/meso-Co3O4 catalysts for the conversion of benzene-toluene-xylene to environmental friendly components via catalytic oxidation

Three - dimensional meso-porous Co₃O₄ was prepared by nanocasting pathway based on the use of mesoporous silica (KIT-6) as hard template with different Cobalt concentrations (0.5-2.5 mol ratio based on mesoporous silica KIT-6). The prepared samples was used as supports for preparing V₂O₅/Co₃O₄ (1, 6 wt% of V₂O₅) catalysts. The prepared samples were characterized by different techniques. The catalytic activity of the prepared samples were evaluated in the complete oxidation reaction of toluene, benzene, and/or p-xylene; (as model reactants of volatile organic compounds) in terms of CO₂. The catalytic reaction was carried out in a fixed-bed micro-reactor operated under atmospheric pressure and within the reaction temperature range of 200-400 °C. The data confirmed that the three dimensional-mesoporous Co₃O₄ (1.0 mole ratio) replicated sample possessed improved different parameters compared to those of the Co₃O₄ sample with other mole ratios. The data reflected the yield of Co2 is decreased upon the increase in reaction temperature to 400°C. 1 wt.% V₂O₅/m-Co₃O₄ catalyst shows a reverse direction, the CO₂ yield slowly increased in the range 150-250 °C, then jumped at 300 °C until maximum yield (100%) is observed at 400 °C. 1 wt.% V₂O₅/m-Co₃O₄ catalyst was found to be the active and selective promised catalyst for the complete oxidation of either individual aromatic volatile organic compounds (benzene, toluene, and/or xylene) and/or their mixtures to 100% CO₂.

Beware of beam damage under reaction conditions: X-ray induced photochemical reduction of supported VOx catalysts during in situ XAS experiments

In situ X-ray absorption spectroscopy (XAS) is a powerful technique for the investigation of heterogeneous catalysts and electrocatalysts. The obtained XAS spectra are usually interpreted from the point of view of the investigated chemical processes, thereby sometimes omitting the fact that intense X-ray irradiation may induce additional transformations in metal speciation and, thus, in the corresponding XAS spectra. In this work, we report on X-ray induced photochemical reduction of vanadium in supported vanadia (VOx) catalysts under reaction conditions, detected at a synchrotron beamline. While this process was not observed in an inert atmosphere and in the presence of water vapor, it occurred at room temperature in the presence of a reducing agent (ethanol or hydrogen) alone or mixed with oxygen. Temperature programmed experiments have shown that X-ray induced reduction of VOx species appeared very clear at 30-100 °C but was not detected at higher temperatures, where the thermocatalytic ethanol oxidative hydrogenation (ODH) takes place. Similar to other studies on X-ray induced effects, we suggest approaches, which can help to mitigate vanadium photoreduction, including defocusing of the X-ray beam and attenuation of the X-ray beam intensity by filters. To recognize beam damage under in situ/operando conditions, we suggest performing X-ray beam switching (on and off) tests at different beam intensities under in situ conditions.

The Promoting Effect of Ti on the Catalytic Performance of V-Ti-HMS Catalysts in the Selective Oxidation of Methanol

The effects of Ti modification on the structural properties and catalytic performance of vanadia on hexagonal mesoporous silica (V-HMS) catalysts are studied for selective methanol-to-dimethoxymethane oxidation. Characterizations including N2 adsorption–desorption (SBET), X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS UV-Vis), Micro-Raman spectroscopy, FTIR spectroscopy, and H2 temperature-programmed reduction (H2-TPR) were carried out to investigate the property and structure of the catalysts. The results show that Ti can be successfully incorporated into the HMS framework in a wide range of Si/Ti ratios from 50 to 10. Ti modification can effectively improve the distribution of vanadium species and thus enhance the overall redox properties and catalytic performance of the catalysts. The catalytic activity of the V-Ti-HMS catalysts with the Si/Ti ratio of 30 is approximately two times higher than that of V-HMS catalysts with comparable selectivity. The enhanced activity exhibited by the V-Ti-HMS catalyst is attributed to the improved dispersion and reducibility of vanadium oxides.

Conversion of Alcohols on Stoichiometric and Reduced Rutile TiO2 (110): Point Defects Meet Bifunctionality in Oxide (Photo-)Chemistry

Oxidic (photo-)catalysts have the potential to play an important role to efficiently implement sustainable feedstocks and green energy sources into future energy technologies. They may be used not only for solar energy harvesting, but also for hydrogen production or being essential for the fabrication of fine chemicals. Therefore, it is crucial to develop a detailed understanding of how the atomistic environment of the catalyst can be designed in order to promote distinct reaction pathways to influence the final product distribution of chemical reactions. In this perspective article, we survey the surface (photo-)chemistry of methanol on rutile TiO2 surfaces and hybrid catalysts based thereon. Especially the role of the surface bifunctionality by Lewis acidic and basic sites combined with the strong impact of point defects such as reduced titanium sites (mainly Ti3+ interstitials) shall be illuminated. It is shown how the selective activation of either O–H, C–H or C–O bonds in the methanol molecule can be used to tune not only the overall conversion, but to switch between oxidative and reductive routes in favor of either deoxygenation, partial oxidation or C–C coupling reactions. Especially the latter ones are of particular interest to introduce methanol from green sources such as biomass as a sustainable feedstock into already existing petrochemical technologies.

Graphical Abstract

Selective oxidation conversion of methanol/dimethyl ether

As important platform compounds, methanol and dimethyl ether (DME) are vital bridges between the coal chemical, petrochemical and fine chemical industries. At present, the synthesis of methanol/DME has been industrialized, and the production capacity is much larger than the market demand. Therefore, the conversion of methanol/DME into more valuable chemicals is an important and significant topic. The synthesis of high value-added oxygenated chemicals and diesel oil additives from methanol/DME by an oxidation method has attracted substantial attention due to it being green and environmentally friendly and having good atom economy. In this feature article, we have summarized the recent advances in the synthesis of formaldehyde, methyl formate, dimethoxymethane, and polyoxymethylene dimethyl ethers, from the selective oxidation of methanol/DME, and further discussed the adsorption and activation of reactant molecules, selective cleavage of C-O, C-H or O-H bonds in methanol/DME molecules and the C-O chain growth in the target products. In the end, major challenges and future prospects are proposed from the viewpoint of catalyst design and application. It is expected that this feature article will provide theoretical guidance for the activation and cleavage of C-O, C-H, or O-H bonds in other small molecules of alcohol/ether as well as low-carbon alkanes, so as to synthesize high value-added chemicals.

Redox Dynamics of Active VO x Sites Promoted by TiO x during Oxidative Dehydrogenation of Ethanol Detected by Operando Quick XAS

Titania-supported vanadia (VO _x /TiO₂) catalysts exhibit outstanding catalytic in a number of selective oxidation and reduction processes. In spite of numerous investigations, the nature of redox transformations of vanadium and titanium involved in various catalytic processes remains difficult to detect and correlate to the rate of products formation. In this work, we studied the redox dynamics of active sites in a bilayered 5% V₂O₅/15% TiO₂/SiO₂ catalyst (consisting of submonolayer VO _x species anchored onto a TiO _x monolayer, which in turn is supported on SiO₂) during the oxidative dehydrogenation of ethanol. The VO _x species in 5% V₂O₅/15% TiO₂/SiO₂ show high selectivity to acetaldehyde and an ca. 40 times higher acetaldehyde formation rate in comparison to VO _x species supported on SiO₂ with a similar density. Operando time-resolved V and Ti K-edge X-ray absorption near-edge spectroscopy, coupled with a transient experimental strategy, quantitatively showed that the formation of acetaldehyde over 5% V₂O₅/15% TiO₂/SiO₂ is kinetically coupled to the formation of a V⁴⁺ intermediate, while the formation of V³⁺ is delayed and 10-70 times slower. The low-coordinated nature of various redox states of VO _x species (V⁵⁺, V⁴⁺, and V³⁺) in the 5% V₂O₅/15% TiO₂/SiO₂ catalyst is confirmed using the extensive database of V K-edge XANES spectra of standards and specially synthesized molecular crystals. Much weaker redox activity of the Ti⁴⁺/Ti³⁺ couple was also detected; however, it was found to not be kinetically coupled to the rate-determining step of ethanol oxidation. Thus, the promoter effect of TiO _x is rather complex. TiO _x species might be involved in a fast electron transport between VO _x species and might affect the electronic structure of VO _x , thereby promoting their reducibility. This study demonstrates the high potential of element-specific operando X-ray absorption spectroscopy for uncovering complex catalytic mechanisms involving the redox kinetics of various metal oxides.

Timing matters: pre-assembly versus post-assembly functionalization of a polyoxovanadate–organic cuboid

The pre-assembly and post-assembly approaches in the functionalization of a polyoxovanadate–organic cuboid, [{V₆S}₈(QPTC)₈{V₃}₂]¹⁰⁻, are discussed. We have shown that the two pathways have led to distinctly different systems, with either an expanded or contracted interior void space, when phenylphosphonate is introduced at different stages of the self-assembly. One leaves the cuboid framework largely intact, whereas the other results in a compact, twisted cuboid. Kinetic factors will have to be considered in the equilibrium of these complex processes. Furthermore, the exceptional stability of these polyoxometalate–organic systems facilitates mass spectrometric characterization, which confirms the composition of the complexes and also indicates that the methoxide groups on the vanadium cluster nodes are labile. The results will help deepen the mechanistic understanding of the formation mechanisms of polyoxovanadate-based metal–organic cages and other functionalized polyoxovanadate clusters in general.

Introducing functional groups at different stages in the assembly of a metal–organic cage has led to two distinct, endo-functionalized products, a result attributed to kinetic trapping in a process generally operating under thermodynamic control.

Precise control of heat-treatment conditions to improve the catalytic performance of V2O5/TiO2 for H2S removal

The purpose of this study is to investigate the influences of atmospheric gas and temperature while preparing V₂O₅/TiO₂ catalysts to find a suitable heat-treatment method to improve catalytic performance during the process of H₂S removal. The catalysts prepared by wet-impregnation were heat-treated at different temperatures (400 or 600 ℃) under various atmospheres (Air, N₂, or H₂). The catalytic tests demonstrated that the catalyst heat-treated at 400 ℃ under N₂ atmosphere (N-400) possessed excellent catalytic activities regarding H₂S conversion (96.4%) and sulfur yield (89.1%). The characterization results revealed that the mild reducing condition employed for N-400 led to the formation of partially reduced V₂O₅ crystals and a strong V-Ti interaction owing to the anatase TiO₂ phase, resulting in the high oxygen vacancies on the catalyst surface. However, severe reducing conditions (H₂ or N₂ with 600 ℃) or the higher temperature (600 ℃) induced highly reduced V₂O_5-x or rutile TiO₂ related to a weak V-Ti interaction, respectively, which facilitated lower oxygen vacancies. This study is the first to demonstrate the significance of a precisely controlled heat-treatment to enhance catalytic performance for H₂S removal.

Conversion of Green Methanol to Methyl Formate

Methyl formate is a key component for both defossilized industry and mobility. The current industrial production via carbonylation of methanol has various disadvantages such as high requirements on reactant purity and low methanol conversion rates. In addition, there is a great interest in replacing the conventional homogeneous catalyst with a heterogeneous one, among other things to improve the downstream processing. This is why new approaches for methyl formate are sought. This review summarizes promising approaches for methyl formate production using methanol as a reactant.

Unraveling the Origin of Photocatalytic Deactivation in CeO2/Nb2O5 Heterostructure Systems during Methanol Oxidation: Insight into the Role of Cerium Species

The study provides deep insight into the origin of photocatalytic deactivation of Nb₂O₅ after modification with ceria. Of particular interest was to fully understand the role of ceria species in diminishing the photocatalytic performance of CeO₂/Nb₂O₅ heterostructures. For this purpose, ceria was loaded on niobia surfaces by wet impregnation. The as-prepared materials were characterized by powder X-ray diffraction, nitrogen physisorption, UV-visible spectroscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and photoluminescence measurements. Photocatalytic activity of parent metal oxides (i.e., Nb₂O₅ and CeO₂) and as-prepared CeO₂/Nb₂O₅ heterostructures with different ceria loadings were tested in methanol photooxidation, a model gas-phase reaction. Deep insight into the photocatalytic process provided by operando-IR techniques combined with results of photoluminescence studies revealed that deactivation of CeO₂/Nb₂O₅ heterostructures resulted from increased recombination of photo-excited electrons and holes. The main factor contributing to more efficient recombination of the charge carriers in the heterostructures was the ultrafine size of the ceria species. The presence of such highly dispersed ceria species on the niobia surface provided a strong interface between these two semiconductors, enabling efficient charge transfer from Nb₂O₅ to CeO₂. However, the ceria species supported on niobia exhibited a high defect site concentration, which acted as highly active recombination centers for the photo-induced charge carriers.

How to not build a cage: endohedral functionalization of polyoxometalate-based metal-organic polyhedra

Introducing functionalities into the interior of metal-organic cage complexes can confer properties and utilities (e.g. catalysis, separation, drug delivery, and guest recognition) that are distinct from those of unfunctionalized cages. Endohedral functionalization of such cage molecules, for decades, has largely relied on modifying their organic linkers to covalently append targeted functional groups to the interior surface. We herein introduce an effective coordination method to bring in functionalities at the metal sites instead, for a set of polyhedral cages where the nodes are in situ formed polyoxovanadate clusters, [VIV 6O6(OCH3)9(μ6-SO4)(COO)3]2-. Replacing the central sulfates of these hexavanadate clusters with more strongly coordinating phosphonate groups allows the installation of functionalities within the cage cavities. Organophosphonates with phenyl, biphenyl, and terphenyl tails were examined for internalization. Depending on the size/shape of the cavities, small phosphonates can fit into the molecular containers whereas larger ones inhibit or transform the framework architecture, whereby the first non-cage complex was isolated from a reaction that otherwise would lead to entropically favored regular polyhedra cages. The results highlight the complex and dynamic nature of the self-assembly process involving polyoxometalates and the scope of molecular variety accessible by the introduction of endo functional groups.

The effect of the calcium dopant on the activity and selectivity of gold catalysts supported on SBA-15 and Nb-containing SBA-15 in methanol oxidation

Gold catalysts based on SBA-15, NbSBA-15 (Nb introduced in one pot synthesis) and Nb₂O₅/SBA-15 (prepared by impregnation of SBA-15) were doped with calcium species introduced before Au loading and were tested in gas-phase methanol oxidation.

Monomeric vanadium oxide: a very efficient species for promoting aerobic oxidative dehydrogenation of N-heterocycles

The isolated monomeric VO₄ species, controlled by natural ligand tartaric acid, in the VO_x/NbO_y@C catalysts exhibited excellent performances and good recyclability in the dehydrogenation of N-heterocycles.

Nanocomposites of NiO/CuO Based MOF with rGO: An Efficient and Robust Electrocatalyst for Methanol Oxidation Reaction in DMFC

In this work a novel bimetallic nickel oxide/copper oxide metal–organic framework (NiO/CuO MOF) has been developed by using two linkers: Benzene Dicarboxylic acid (BDC) and Pyrazine. The composites of NiO/CuO MOF with different amounts of reduced graphene oxide (rGO) were synthesized through a hydrothermal method and subsequently characterized by multiple significant techniques like XRD, SEM, EDX, FTIR and Raman IR for an investigation of their structural and morphological properties. The prepared series of material was later employed for electrochemical oxidation of methanol, tested by cyclic voltammetry (CV) in basic medium on a modified glassy carbon electrode (GCE). The electrochemical response depicts that increasing concentration of rGO enhances the electrocatalytic activity of the catalyst for methanol oxidation reaction (MOR). The catalyzed oxidation reaction of methanol by NiO/CuO MOF and rGO-NiO/CuO MOF composites give a superlative current density of 437. 28 mA/cm² at 0.9 V potential at 50 mV/s scan rate. This activity makes it a promising catalytic material for electrolysis of methanol in direct methanol fuel cell (DMFC).

Present and new frontiers in materials research by ambient pressure x-ray photoelectron spectroscopy

In this topical review we catagorise all ambient pressure x-ray photoelectron spectroscopy publications that have appeared between the 1970s and the end of 2018 according to their scientific field. We find that catalysis, surface science and materials science are predominant, while, for example, electrocatalysis and thin film growth are emerging. All catalysis publications that we could identify are cited, and selected case stories with increasing complexity in terms of surface structure or chemical reaction are discussed. For thin film growth we discuss recent examples from chemical vapour deposition and atomic layer deposition. Finally, we also discuss current frontiers of ambient pressure x-ray photoelectron spectroscopy research, indicating some directions of future development of the field.

Quantitative Conversion of Methanol to Methyl Formate on Graphene-Confined Nano-Oxides

We demonstrate the nearly quantitative conversion of methanol to methyl formate (MF) with a reliable durability on the reduced-graphene-oxide-confined VTiOx nanoparticles (rGO@VTiO). The rGO@VTiO exhibits superior low-temperature reactivity than the rGO-free VTiO, and the MF yield of 98.8% is even comparable with the noble metal catalysts. Both experiments and simulations demonstrate that the ultrathin rGO shell significantly impacts the shell/core interfacial electronic structure and the surface chemistry of the resultant catalysts, leading to remarkable reactivity in methanol to MF. rGO enhances the dispersion and loading rates of active monomeric/oligomeric VOx. In particular, the electron migration between the rGO shell and oxides core reinforces the acidity of rGO@VTiO in the absence of sulfate acidic sites. Moreover, both in situ NAP-XPS and DRIFTS investigations suggest that the lattice oxygen was involved in the oxidation of methanol and the MF was formed via the hemiacetal mechanism.

Development of Nickel-BTC-MOF-Derived Nanocomposites with rGO Towards Electrocatalytic Oxidation of Methanol and Its Product Analysis

In this study, electrochemical oxidation of methanol to formic acid using the economical and highly active catalytic Nickel Benzene tricarboxylic acid metal organic framework (Ni-BTC-MOF) and reduced graphene oxide (rGO) nanocomposites modified glassy carbon electrode GCE in alkaline media, which was examined via cyclic voltammetry technique. Nickel based MOF and rGO nanocomposites were prepared by solvothermal approach, followed by morphological and structural characterization of prepared samples through X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and energy dispersive X-ray (EDX) analysis. The electrochemical testing of synthesized materials represents the effect of the sequential increase in rGO concentration on electrocatalytic activity. The Ni-BTC/4 wt % rGO composite with a pronounced current density of 200.22 mA/cm2 at 0.69 V versus Hg/HgO electrode at 50 mV/s was found to be a potential candidate for methanol oxidation in Direct Methanol Fuel Cell (DMFC) applications. Product analysis was carried out through Gas Chromatography (GC) and Nuclear Magnetic Resonance (NMR) spectroscopy, which confirmed the formation of formic acid during the oxidation process, with approximately 62% yield.

Mechanism of heterogeneous catalytic oxidation of organic compounds to carboxylic acids

The results of studies on the mechanism of heterogeneous catalytic oxidation of organic compounds of different chemical structure to carboxylic acids are analyzed and generalized. The concept developed by Academician G.K.Boreskov, according to which the direction of the reaction is governed by the structure and bond energy of surface intermediates, was confirmed taking the title processes as examples. Quantitative criteria of the bond energies of surface compounds of oxidizable reactants, reaction products and oxygen that determine the selective course of the reaction are presented.

The bibliography includes 195 references.

VRK, Y. W. S, P. S. SP, N. L. One-step selective synthesis of 2-chlorobenzonitrile from 2-chlorotoluene via ammoxidation

Isolated and polymeric vanadia formulate V₂O₅/Al₂O₃ catalysts selective for the synthesis of 2-chlorobenzonitrile from 2-chlorotoluene in a single step through ammoxidation.

First principles studies on the selectivity of dimethoxymethane and methyl formate in methanol oxidation over V2O5/TiO2-based catalysts

First principles calculations using both molecular cluster and periodic slab models were performed to reveal the mechanism for the formation of dimethoxymethane (DMM) from methanol over V₂O₅/TiO₂-based catalysts. Two different pathways were found, and the formation of DMM was predicted to be initiated by methanol chemisorption followed by a dehydration reaction with hemiacetal catalyzed by acidic sites. For unpromoted V₂O₅/TiO₂ catalysts, we predicted the energy barrier for the rate determining step (RDS) to follow the order formaldehyde (FA) > methyl formate (MF) > DMM, consistent with the experimental observation for the preferential formation of DMM at a relatively low temperature and that of MF at a relatively high temperature. For sulfate-promoted catalysts, the energy barriers were calculated to follow the order FA > DMM > MF, so the sulfate promoter was predicted to mainly enhance the selectivity of MF, consistent with our previous experiment in which very high yield of MF was obtained with the sulfate-promoted catalyst. Calculated rate constants for the RDS were further used for semi-quantitative predictions of the product selectivities, which were found to be in quite good agreement with some of the recent experimental data in the literature, showing the validity of our approach. We also investigated the effects of the titania support and the polymerization of the vanadia species on the reactivity of the V₂O₅/TiO₂ catalyst. Finally, we benchmarked several popular exchange-correlation functionals for calculating the reaction energies for the formation of FA, MF, and DMM from methanol oxidation, and the M06 hybrid functional was found to be superior to other semi-local and hybrid functionals studied.